SMART Board 8070ie-SMP interactive flat panel with appliance

SMART Board 8070ie-SMP interactive flat panel with appliance
Specifications
SMART Board® interactive
flat panel with appliance
Model 8070ie-SMP
Physical specifications
Size
66 3/8" W × 40 7/8" H × 9 7/8" D
(168.5 cm × 103.8 cm × 25 cm)
(maximum
70" (178 cm) diagonal, 16:9 aspect
ratio
interactive
61" W × 34 1/4" H
Active screen area
projected area)
Weight
Appliance
(154.9 cm × 87.2 cm)
262 lb. (119 kg)
2.6 lb. (1.2 kg)
All dimensions +/- 1/8" (0.3 cm).
All weights +/- 2 lb. (0.9 kg).
Shipping size
1 unit on a pallet
2 units on 3 pallets
22 1/4" W × 54" H × 78" D (57 cm × 139 cm × 198 cm)
45" W × 59 3/4" H × 78" D (114 cm × 152 cm × 198 cm)
Shipping weight
1 unit on a pallet
345 lb. (156.5 kg)
2 units on 3 pallets
735 lb. (333.4 kg)
SPEC IF IC A T ION S
SMART Board interactive flat panel – Model 8070ie-SMP
Standard features
Touch technology
DViT® (Digital Vision Touch) technology uses digital cameras to track objects interacting
with the surface. Cameras can recognize finger, pen and eraser touch.
Gestures
Orientation
Supports multitouch gestures
The Orientation button on the color select module enables you to adapt the touch control to
various screen resolutions.
Pen
The pen interacts with the interactive flat panel to draw digital ink. Buttons on the color select
module enable you to select pen color. The bottom frame of the interactive flat panel has
magnetic slots for the two included pens.
Eraser
Keyboard
The interactive flat panel has a magnet-mounted eraser.
You can connect a keyboard or press the Keyboard button on the color select module to use
the on-screen keyboard.
Product help
The Help button on the color select module enables you to access product help.
Included
connectors and
hardware
The following connectors and hardware are included with your SMART Board® interactive
flat panel with appliance.
SMART Board
interactive flat panel
Appliance
Video and control
inputs
2
l
16' (5 m) USB cable
l
13' (4 m) VGA cable
l
Infrared remote control
l
CAT 5 USB extender
l
SMART GoWire™ auto-launch cable with SMART Meeting Pro™ software
l
3' (0.9 m) power cable
l
16' (5 m) wire bundle to connect the interactive flat panel to a laptop
l
6' (1.8 m) USB cable
l
4' (1.2 m) VGA cable
l
Power adapter
l
Mounting hardware
l
S-Video
l
RCA video input
SPEC IF IC A T ION S
SMART Board interactive flat panel – Model 8070ie-SMP
Power
Audio
specifications
Audio inputs
Audio output
l
HDMI (× 2)
l
RGB/HV in for guest laptop
l
VGA for room computer
l
DisplayPort
l
DVI-D
l
USB B (× 3)
l
USB A (× 1) to use with the room computer only
l
AC power inlet
l
AC power pass-through
l
Includes two 15 W speakers
l
External speaker terminals: 10 W + 10 W with 8 Ω of resistance
l
USB
l
Dual RCA jacks (× 2)
l
3.5 mm jack
l
Dual RCA jacks (× 2)
l
3.5 mm audio output connector
Screen
specifications
Pixel pitch
Contrast ratio
Brightness
Horizontal frequency
Vertical frequency
Optimum resolution
0.807 mm
1300:1
Maximum 430 cd/m²
31.5–91.1 kHz (analog and digital)
50–85 Hz
1920 × 1080 at 60 Hz
3
SPEC IF IC A T ION S
SMART Board interactive flat panel – Model 8070ie-SMP
Firmware
Appliance
mounting system
Warranty
l
SMART Meeting Pro application
l
Internet browser
l
PDF viewer
l
Presentation viewer
l
Four screws to mount the appliance bracket on the interactive flat panel
l
One thumb screw to hold the appliance in place in the bracket
Two-year limited equipment warranty. See your product’s warranty documents for more
information.
Installation requirements
l
The interactive flat panel must be installed by trained professional installers.
l
Use a lifting device to lift the interactive flat panel.
l
Your installers require a standard VESA® 400 mm × 400 mm mounting plate (not
included) to wall-mount the interactive flat panel.
l
Ensure the mounting system can support the product’s weight.
l
Refer to the SMART Board 8070i interactive flat panel installation guide
(smarttech.com/kb/155314) for more information.
Storage and operating requirements
Power
9.2A at 100V AC to 3.7A at 240V AC, 50 Hz to 60 Hz
requirements
(LCD panel)
Power
consumption at
Typically up to 560 W (brightness at 70% and volume at 30), maximum 610 W (brightness
and volume at maximum)
77ºF (25ºC)
Operating
41°F to 95°F (5°C to 35°C)
temperature
Storage
23°F to 95°F (-5°C to 35°C)
temperature
4
SPEC IF IC A T ION S
SMART Board interactive flat panel – Model 8070ie-SMP
Humidity
5% to 80% relative humidity, non-condensing
C A U TI ON
Ventilation
requirements
l
The interactive flat panel is intended for indoor use only.
l
Do not pour or spray liquids onto your product’s electronic components.
Maintain a 4" (10 cm) ventilation area on all sides of your interactive flat panel to enable its
cooling fans to operate. Don’t store or operate your interactive flat panel in dusty
environments because dust could interfere with the product’s ventilation and cooling.
Environmental
l
FCC part 15 Class A
l
EN55022 / CISPR 22
l
KN55022
Flammability
rating
Electronics and
UL 94-V0
connectors
Mechanical parts
USB cable
Environmental
UL 94-HB
UL VW-1 / CSA FT4
EU RoHS, WEEE, Battery and Packaging; US Packaging
compliance
Regulatory
CB report, CE, C-Tick, UL, FCC and KC
certification
SMART order numbers
SBID 8070ie-SMP
SMART Board 8070i interactive flat panel with appliance with SMART GoWire cable with
SMART Meeting Pro software.
Optional accessories
RPEN-SBID
RERASER-SBID
Replacement pen for SMART Board 8000 series interactive flat panels
Replacement eraser for SMART Board 8000 series interactive flat panels
5
SPEC IF IC A T ION S
SMART Board interactive flat panel – Model 8070ie-SMP
Physical dimensions
Front and side
66 3/8" ( 16 8.5 cm )
40 7/8 " (103.8 cm )
view
9 7/8"
(25 cm )
Back view
15 1/4" × 15 1/4"
(40 cm × 40 cm )
mounting holes
13 1/4"
(33.5 cm )
Appliance power
supply mounting
location
Appliance
Power outlet for the appliance
smarttech.com/support
smarttech.com/contactsupport
© 2011–2012 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, DViT, SMART Meeting Pro, SMART GoWire, the SMART logo
and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and
company names may be trademarks of their respective owners. One or more of the following patentsUS6320597; US6326954; US6563491; US6741267;
US6803906; US6829372; US6947032; US6954197; US6972401; US7151533; US7236162; US7411575; US7619617; US7643006; US7692625; US7755613;
US7757001; US7880720; USD612396; USD616462; USD617332 and USD636784. Other patents pending. Contents are subject to change without notice.
06/2012.
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising