Intake Touring - Custom Chrome

Intake Touring - Custom Chrome
Touring
7
Intake
TOURING
TA
Daytona Twin Tec Twin Tuner 2
Daytona Twin Tec Twin Tuner
Permits you to easily adjust your fuel injection to match the
requirements of performance parts including camshafts, free flowing
exhausts, and low restriction air filters, by adding or subtracting fuel.
Installation only takes 10-15 minutes and is very easy, with no splicing,
cutting, crimping, or bulky interconnection. The Twin Tuner also has
an advanced mode, where you can use the optional USB Interface
and PC Link Tuner software to make precise fuel adjustments. The PC
Link Tuner software uses the same RPM rows and throttle position
columns as the Dynojet Power Commander. If you have created
Dynojet Power Commander files for your applications, you can
enter the same values into our tables. You can make independent
adjustments to the front and rear cylinders.
• Increased horsepower
• Improved throttle response
• Easy plug-in installation and setup
• Very compact size – only 4"-long x 2"-wide x 1/2"-tall
• Can use Dynojet Power Commander maps
• Compatible with Twin Scan II and Tuning Aid
• Low cost
672864 Fits all Touring models from 08-13 with 73pin Delphi ECM
��������������������������������������������������������������������������������������������������������$254.99
The Twin Tuner II has the same features as the Twin Tuner and
additionally it allows you to adjust the ignition timing to the
requirements of your engine. You can add or subtract fuel and retard
spark timing up to 10 degrees.
672861 Fits all fuel injected Touring models from 08-13 with 73 pin
Delphi ECM����������������������������������������������������������������������������������$313.99
672851
672532
Oxygen Sensor Eliminator Kit by Daytona Twin Tec
Fits 06 and later Harley-Davidson models with two wire sensors.
Allows air/fuel ratio changes at idle and part throttle for racing
applications. Also available for models using four wire heated
sensors. Sold in pairs.
672532 Oxygen sensor eliminator kit ����������������������������������������������������$25.99
672851 Oxygen sensor eliminator kit four wire����������������������������������$36.99
602410
602411
602406
RCX-Celerator Closed-Loop Fuel Management
System by RC Components
• The only “Closed Loop” Fuel Management System that utilizes the
factory Dephi ECU and factory sensors
• Quick connect plugs for easy installation
• Available for all 08-13 Throttle by Wire models
• Available for all Harley Delphi & Magneti-Marelli ECU
• Works in conjunction with factory “Closed Loop System” and uses
both factory O2 sensors
• No manual adjusting ”Tamper proof” surface mount design
• Maximizes performance and efficiency while decreasing emissions
and fuel consumption
• Replaces costly and punishing Dyno time
• Automatically adjust as you ride and compensates for changes in
load conditions
• Re-calibrates for specific modifications made to your motorcycle
such as pipes, air cleaner, etc.
• Increases horsepower and torque up to 20% for most motorcycles
• Works in conjunction with both factory and race tuner downloads
• Made in USA
602410
602411
*Note: On 2005 Harley models they had two different Throttle Position Sensor plugs. If it’s a
Flat Throttle Position Sensor plug you should use CCI# 602410 Terminal Velocity III unit.
602412
602413
602418
602414
602417
602415
602416
602405
602406
TA.58
Fits 01-05 FXST, 04-05 Dynas, 02-05 FLH and V-rod models 02-07.
Has Flat “Throttle Position Sensor” plug and includes one O2
sensor��������������������������������������������������������������������������������������������� $449.99
*Fits 06 FXST and Touring models. Has Round “Throttle Position
Sensor” plug and includes one O2 sensor����������������������������� $449.99
Fits all Big Twin models with Magneti Marelli fuel injection from
95-01. Has Flat “Throttle Position Sensor” plug and includes one
O2 sensor��������������������������������������������������������������������������������������� $449.99
Fits Softail models 07-11, Dyna Glide models 06-11 and all 07
Touring (2010 CVO) models. Has Round “Throttle Position
Sensor” plug and uses factory O2 sensors����������������������������� $399.99
Fits 2012 Softail and Dyna models including Switchback � $399.95
Fits Touring models 08-09. Has 6 pins Oval “Throttle Position
Sensor” plug and uses factory O2 sensors����������������������������� $399.99
Fits Touring models 10-13 and 2010 CVO FXST ������������������� $399.99
Fits Sportster models 07-13. Has Flat “Throttle Position Sensor”
plug and uses factory O2 sensors��������������������������������������������� $399.99
Fits V-Rod models 08-11. Has Flat “Throttle Position Sensor”
plug and uses factory O2 sensors��������������������������������������������� $399.99
Replacement O2 sensor (sold each)����������������������������������������� $139.99
Replacement O2 sensor bung (sold each) ������������������������������� $19.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see Cautionary Information in back of catalog.
TOURING
TOURING
SEATS &
BAGS
630124
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
2000HD-EFI Tuner by Dynatek
• The new Dyna 2000-HDEFI is an ignition and fuel injection control
module that plugs in line with the bike’s stock ECM. It uses original
equipment style connectors, so no splicing or cutting of the harness
is required.
• Ignition Timing Control- Significant horsepower can often be made
by making timing adjustments as well as being able to correct
detonation problems that may occur. You can advance or retard
your stock timing curve by +/- 10 degrees using the included Control
Center software.
• Fuel Control- The Dyna 2000-HDEFI allows for very specific fuel
adjustment of the entire range of throttle openings and rpm
combinations. Adjustments can also be based on additional inputs
such as cylinder head temp or gear position
• Increased Rev Limit- The rev limiter is raised to 6200 RPM.
• Compatible with the DynaTune auto tuning kit- The Dyna 2000HDEFI can be used with the DynaTune auto tune kit for on the fly
automatic fuel adjustment.
630123
630124
2000HD-EFI for Touring models 08-09 �����������������������������������$379.00
ELECTRICAL
2000HD-EFI for Touring models 10-13 �����������������������������������$379.00
DynaTune Auto Tune Units
630132 Dynatune module for Delphi EFI���������������������������������������������$399.99
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
629274
HD Touring Models
629275
AIR
FILTER
Price
SE
REPL.
Price
CC
MODEL
629274
$88.99
629275
$74.99
1584
Road King / Road King Classic
270126 *
$13.99
629274
$88.99
629275
$74.99
1584
Street Glide
270126 *
$13.99
629274
$88.99
629275
$74.99
1584
Road Glide / Road Glide Custom
270126 *
$13.99
629274
$88.99
629275
$74.99
1584
Electra Glide / Electra Glide Classic
270126 *
$13.99
629274
$88.99
629275
$74.99
1584
Ultra Classic Electra Glide
270126 *
$13.99
OIL FILTER
Price
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
APPLICATION
YEAR
FILTER SIZE
Touring Models
08-13
1 5/8”
MIRROR
Price
629277
$266.99
HP GAIN
+ 8.43 hp
GENERAL
1) Excludes Twin-Cam Engines with the Magnetti-Marelli Fuel Injection System 2) Now 50-State
Street Legal on most 2001-07 Models Part number and vehicle specific horsepower data shown,
results will vary for other models and/or applications. Dyna, Sportster, Softail, and Twin-Cam are
trademarks of Harley-Davidson. Harley-Davidson is a registered trademark of H-D Michigan, Inc.
CROSS
REFERENCE
629277
w w w.cu sto m c h ro m e.co m
TA.59
TOURING
TA
654120
654123
654124
654127
654128
654119
Inverted Series Air Cleaner Kits by Arlen Ness
• The ultimate combination of performance and design for your
V-Twin engine
• Each handmade air filter is made in the USA and features an
inverted pleated top with pleated sides to maximize airflow. Our
pre-oiled black filter element is encapsulated in a stainless steel
jacket for the ultimate in style and durability
• Forged air filter housings feature built in velocity stacks that scream
performance and enhance looks
• Forged billet backing plate features our proven radius inlet, hidden
breather hardware and our industry leading Big Sucker patented
technology
• Available in chrome or black anodize finishes
• All mounting hardware and gaskets are included
Slot Track Inverted Air Cleaner
654119 Slot Track air cleaner for 08-13 FLT chrome��������������������������� $399.95
654120 Slot Track air cleaner for 08-13 FLT black������������������������������� $399.95
654121 Slot Track air cleaner for 00-13 Big Twin (except TBW) chrome
Deep Cut Inverted Air Cleaner
654123 Deep Cut air cleaner for 08-13 FLT chrome��������������������������� $399.95
654124 Deep Cut air cleaner for 08-13 FLT black������������������������������� $399.95
654125 Deep Cut air cleaner for 00-13 Big Twin (except TBW) chrome
��������������������������������������������������������������������������������������������������������� $399.95
654126
Beveled
654127
654128
654129
654130
Deep Cut air cleaner for 00-13 Big Twin (except TBW) black
��������������������������������������������������������������������������������������������������������� $399.95
Inverted Air Cleaner
Beveled air cleaner for 08-13 FLT chrome ����������������������������� $399.95
Beveled air cleaner for 08-13 FLT black ��������������������������������� $399.95
Beveled air cleaner for 00-13 Big Twin (except TBW) chrome
��������������������������������������������������������������������������������������������������������� $399.95
Beveled air cleaner for 00-13 Big Twin (except TBW) black
��������������������������������������������������������������������������������������������������������� $399.95
Accessories
654131 Replacement filter for Inverted Series air cleaners��������������� $64.95
��������������������������������������������������������������������������������������������������������� $399.95
654122
Slot Track air cleaner for 00-13 Big Twin (except TBW) black
��������������������������������������������������������������������������������������������������������� $399.95
688202
Digger Air Cleaners
Kits come ready to install, complete with HP
filter, 90 degree manifold & custom housing,
made from CNC billet aluminum. Can be
used in forward facing or vertical positions.
Use with correct adapter bracket kit for your
application, sold separately.
688201 Chrome coned Digger air cleaner
������������������������������������������������������� $299.99
688202
Black coned Digger air cleaner
���������������������������������������������������� $249.99
688203
688204
Chrome chopped Digger air cleaner
������������������������������������������������������� $289.99
Black chopped Digger air cleaner
������������������������������������������������������� $239.99
Mounting Brackets
629300 Fits Big Twins 93-13 (Except 08up
Touring) ��������������������������������������� $24.99
629304 1/2 Inch Spacer for Touring models
��������������������������������������������������������� $21.99
629305
Bracket with Breather for Touring
models 08-13 ������������������������������� $65.99
688203
TA.60
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see Cautionary Information in back of catalog.
TOURING
TOURING
SEATS &
BAGS
04967
FOOT
CONTROLS
HAND
CONTROLS
04935
U.S. Patent
#6,374,815 B1
LIGHTING
631168
ELECTRICAL
EXHAUST
INTAKE
U.S. Patent
#6,374,815 B1
Stage I ‘Big Sucker’ Air Filter Kit by Ness
All-in-one aluminum backing plate features built-in carb support. Breather tunnels at each head to decrease crankcase pressure. High
performance air filter flows better than stockAccepts all oval or round Original Equipment outer air cleaner covers. Includes the backing plate,
high-flow air filter, chrome banjo bolts, and all necessary hardware.
ENGINE
Stage II ‘Big Sucker’ Air Filter Kit by Ness
Higher performance set-up flows 20% more air than the Stage 1 ‘Big Sucker’ through the larger filter. All-in-one aluminum backing plate
features built-in carb support. Breather tunnels at each head to decrease crankcase pressure. Includes the backing plate, high-flow air filter,
chrome banjo bolts, and all necessary hardware. Note: These kits do not fit engines equipped with the 103” Screamin’ Eagle kit. They also
require the use of an 8”-round air filter cover which is standard on all 92-99 Evolution models.
GASKETS
TRANSMISSION
& CLUTCH
‘Cheap-Sucker’ Air Cleaner Kits by Ness
If you are looking for performance and you are not concerned about hidden hoses and billet covers, these kits are the right choice for your
bike. Each ‘Cheap-Sucker’ kit features a steel backing plate that is integrated into the air filter element so no additional backing plate is
needed. These kits utilize the factory breather hoses and hardware and accept the factory air cleaner cover.
Big Sucker Kits
00-13 All Carb
and Fuel Injected
Models (Except
00-01 Fuel Injected
FLT & 08-FLT
Models)
08-13 FLT Models
93-99 All Carb
and Fuel Injected
Models (Except
96-99 Fuel
Injected FLT
Models)
99-01 Twin Cam
FLT Fuel Injected
Models
DRIVELINE
88-13 XL Models
WHEELS
TIRES &
BRAKES
CHASSIS
Stage I
618510
$129.99
650417
$129.99
04967
$129.99
650401
$129.99
650408
$129.99
Stage II
618511
$139.99
650418
$139.99
04935
$139.99
650400
$139.99
650409
$139.99
Stage I, for OEM cover,
chrome
618512
$146.99
650419
$149.99
650399
$149.99
650398
$154.99
-----
Stage II, Chrome
618513
$156.99
650420
$159.99
650397
$164.99
-----
-----
631169
$99.99
631168
$99.99
-----
-----
631168
$99.99
SHEETMETAL
Cheap Sucker Kits
Cheap Sucker Kit
Accessories and Replacement Parts
Replacement Hardware Kit,
Stage I
631260
$34.99
631260
$34.99
631261
$34.99
631262
$34.99
631263
$34.99
Replacement Hardware Kit,
Stage II
631268
$34.99
631268
$34.99
631269
$34.99
631270
$34.99
631271
$34.99
Replacement Stage I Filter
631183
$49.99
650405
$49.99
650405
$49.99
650404
$49.99
650405
$49.99
Replacement Stage II Filter
631184
$54.99
650406
$54.99
650406
$54.99
650406
$54.99
650406
$54.99
INSTRUMENTS
& GAUGES
GENERAL
w w w.cu sto m c h ro m e.co m
TA.61
CROSS
REFERENCE
World’s Finest Products For Harley-Davidsons
Service
Maintenance
Customization Repair
Performance
18225 Serene Drive | Suite 150 | Morgan Hill, CA 95037 | Printed in USA
44
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising