Network Configuration Guide
COMPLIANT MANAGER
Network Configuration Guide
Model name:
BMS-CM1280FTLE
Network Configuration Guide
Compliant Manager
Prohibited
3) Click [Network Connections]. (Fig.2)
Fig.2
Never connect the Compliant Manager
to the Internet.
We assume no responsibility for any
problems resulting from connection to the
Internet.
Only local area connection is allowed for
the Compliant Manager.
This guide describes the setting procedure for
connecting the Compliant Manager to your
personal computer (abbreviated to “PC”
hereinafter) via the network.
PC operation to monitor and control air
conditioners is detailed in the Owner’s Manual
(Web Version).
4) Right-click [Local Area Connection] and
choose “Properties” from the contextual menu.
(Fig.3)
Fig.3
1. System Configuration of PC
The PC to be connected must meet the following
system configuration conditions so that the
Compliant Manager operates normally.
<Operating system>
• Microsoft Windows XP
• Microsoft Windows Vista
<Hardware>
• Screen resolution 1024 × 768 pixels or more
<Browser>
• Firefox 2.0
• Internet Explorer version 6.0 or version 7.0
5) Select the “Internet Protocol (TCP/IP)”
checkbox, and click [Properties]. (Fig.4)
Fig.4
2. Connecting LAN Cable
Connect the LAN cable to the
connector on the top of the
Compliant Manager.
6) Select the “Use the following IP address:” radio
button, and set as follows:
IP address: 192.168.2.*** (***: Excluding 30)
Subnet mask: 255.255.255.0
Then click [OK]. (Fig.5)
Fig.5
3. Client PC Settings
3-1. Setting IP Address
<Windows XP>
1) Log on to the system with the PC
administrator’s account.
2) Click [Start] -> [Control Panel]. (Fig.1)
Fig.1
7) Close all the windows.
2 (EN)
Network Configuration Guide
Compliant Manager
5) Click [Properties] in the Local Area Connection
Status window. (Fig.4)
Fig.4
<Windows Vista>
1) Log on to the system with the PC
administrator’s account.
2) Click [Start] -> [Control Panel]. (Fig.1)
Fig.1
3) Click [Network and Sharing Center]. (Fig.2)
Fig.2
6) Select the “Internet Protocol Version 4 (TCP/
IPv4)” checkbox, and click [Properties]. (Fig.5)
Fig.5
4) Click “View status” of Local Area Connection.
(Fig.3)
Fig.3
7) Select the “Use the following IP address:” radio
button, and set as follows:
IP address: 192.168.2.*** (***: Excluding 30)
Subnet mask: 255.255.255.0.
Then click [OK]. (Fig.6)
Fig.6
8) Close all the windows.
3 (EN)
Network Configuration Guide
Compliant Manager
3-2. Setting Browser
6) Clear the “Use a proxy server for your LAN”
checkbox (Fig.5) or select the “Bypass proxy
server for local addresses” checkbox (Fig.6),
and then click [Advanced].
Fig.5
<Internet Explorer>
1) Start Internet Explorer.
2) Click [Tools] on the toolbar. (Fig.1)
Fig.1
3) Choose “Internet Options” from the pull-down
menu. (Fig.2)
Fig.2
Fig.6
4) Click the “Connections” tab. (Fig.3)
Fig.3
Add “192.168.2.30” to the “Do not use proxy
server for addresses beginning with:” field.
(Fig.7)
Fig.7
5) Click [LAN settings]. (Fig.4)
Fig.4
7) Type “http://192.168.2.30/index.html” in the
address bar to connect the PC to the air
conditioning control system for Compliant
Manager.
4 (EN)
Network Configuration Guide
Compliant Manager
6) Select the “Direct connection to the Internet”
checkbox (Fig.5) or the “Manual proxy
configuration:” checkbox, and then add
“192.168.2.30” to the “No Proxy for:” field in the
Connection Settings window. (Fig.6)
Fig.5
<Firefox>
1) Start Firefox.
2) Click [Tools] and choose “Options” from the
pull-down menu. (Fig.1)
Fig.1
3) Click [Advanced]. (Fig.2)
Fig.2
Fig.6
4) Click the “Network” tab. (Fig.3)
Fig.3
7) Type “http://192.168.2.30/index.html” in the
address bar to connect the PC to the air
conditioning control system for Compliant
Manager.
5) Click [Settings]. (Fig.4)
Fig.4
5 (EN)
Network Configuration Guide
Compliant Manager
4. Displaying and Changing IP
address of the Compliant
Manager
4-2. Changing IP address
The following procedure describes how to change
an IP address using an example of changing IP
address to 192.168.2.38.
1) Change the mode to the CODE No. setting
change mode.
Press the
(CHECK),
(CL), and ZONE
buttons simultaneously for at least 4
seconds.
(
and CODE No. flash.)
2) Set the data of the CODE No..
1. Change the CODE No. to “1C” with the SET
TEMP.
or
button.
2. Change the set data to “1” with the GROUP
or
button.
(
and CODE No. are still flashing.)
3. Press the
(SET) button to determine the
data. (
and CODE No. change to
lighting.)
4. Change the CODE No. to “13” with the SET
TEMP.
or
button.
5. Change the set data to “38” with the GROUP
or
button.
IP address, subnet mask, default gateway, and
address setting of the Compliant Manager can be
displayed and changed using the following
procedures (CODE No. settings).
CODE
No.
Data
Item
Factory
setting
Setting range
10
IP address
(MSB)
192
0 to 255
11
IP address
168
0 to 255
12
IP address
2
0 to 255
13
IP address
(LSB)
30
0 to 255
14
Subnet mask
(MSB)
255
0 to 255
15
Subnet mask
255
0 to 255
16
Subnet mask
255
0 to 255
17
Subnet mask
(LSB)
0
0 to 255
18
Default gateway
(MSB)
0
0 to 255
19
Default gateway
0
0 to 255
1A
Default gateway
0
0 to 255
1B
Default gateway
(LSB)
0
0 to 255
0
0: Display only
1: Manual setting
2: Auto acquisition
(by DHCP)
1C
Address setting
NOTE)
At this time, the entered data of the selected CODE
No. has not been saved yet.
3) Exit the CODE No. setting change mode.
Press the
(CHECK) button to write the
updated data in the memory of the Compliant
Manager.
* When the data has completely been written
in the memory, the CODE No. setting
change mode is exited.
4) Press the Reset button to restart the Compliant
Manager.
* IP address is set during the restart process.
4-1. Displaying IP address
1) Change the mode to the CODE No. setting
change mode.
Press the
(CHECK),
(CL), and ZONE
buttons simultaneously for at least 4
seconds.
(
and CODE No. flash.)
2) Select the CODE No. for IP address.
1. Change the CODE No. to “10” to “1B” with
the SET TEMP.
or
button.
2. The address of each item is displayed as
setup data.
3) Press the
(CHECK) button to finish the IP
address display.
When the IP address of the Compliant Manager has
been changed, be sure to change the IP address of
the client PC to the address in the same segment.
Also change the setting of the browser to the IP
address of the Compliant Manager.
6 (EN)
Network Configuration Guide
Compliant Manager
Air Conditioning Control System
Network Configuration Guide
(For Compliant Manager)
November 30, 2007 First edition
©Copyright Toshiba Carrier Corporation
2004-2008
7 (EN)
DH84309301
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising