0.07.A.0240 Full_Product_catalogue_23052016BM.indb

0.07.A.0240 Full_Product_catalogue_23052016BM.indb
page 6
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 6
2016-10-25 02:28:34 PM
SLIDING GATE
OPERATORS
Centurion Systems’ range of technologically advanced sliding gate operators have been
designed to automate virtually any sliding gate and suit a wide variety of applications; from
private residences where the gate is only operated infrequently, to large complexes, businesses
and industrial installations where the gate could almost be used constantly. Each and every
operator offers functionality far beyond the scope of simply opening and closing your gate,
putting a world of control literally at your fingertips.
page 7
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 7
2016-10-25 02:28:35 PM
SLIDING GATE OPERATOR QUICK SELECTION GUIDE
This quick selection guide will help you to select the perfect CENTURION for you or your client’s sliding gate by providing the
differentiating features and key specifications of each.
D2 Turbo
D2 Turbo
Low-Voltage
D5-Evo
90V - 240V AC / Solar
10V - 20V AC
10V - 28V DC
90V - 240V AC / Solar
√ / Solar
-
√ / Solar
Gate mass – maximum
250kg
250kg
500kg
Gate speed – maximum
24m/min
24m/min
22m/min
Input voltage
Mains power required at gate
Duty cycle – mains present
Daily operations - maximum
Interface type
Domestic use
50
2
Dial-based
1
Domestic use
50
2
1
Light-industrial 1
150
2
Dial-based
LCD
Time-barring and automatic activation
-
-
√
Onboard multichannel receiver
√
√
√
1. Based on a 25° ambient temperature and unit not in direct sunlight
2. Battery-driven typically using a 7Ah (5Ah – D2 Turbo/D2 Turbo Low-Voltage) battery and a charger (battery can be upgraded for greater power failure autonomy –
mounted separately). Solar power may also be used.
3. With a brush replacement interval of two years
page 8
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 8
www.centsys.com
2016-10-25 02:28:37 PM
D10
D10 Turbo
A10 Endurance
A10 Heavyweight
15V - 19V AC
21V - 26V DC
90V - 240V AC / Solar
90V - 240V AC / Solar
220V - 240V AC
220V - 240V AC
-
√ / Solar
√ / Solar
√
√
500kg
22m/min
Domestic use 1
150
2
1000kg
1000kg
26m/min
Industrial
750
2, 3
1
50m/min (varies with load)
Industrial 1
750
2, 3
Standard
speed
Sprint
speed
1000kg
600kg
Standard
speed
Sprint
speed
16m/min
30m/min
SLIDING GATE OPERATOR
QUICK SELECTION GUIDE
D5-Evo
Low-Voltage
2000kg
13.6m/min
Heavy-industrial
Heavy-industrial
Only limited by duty cycle
Only limited by duty cycle
LCD
LCD
LCD
LED-based
LED-based
√
√
√
-
-
√
√
√
-
-
Centurion Systems (Pty) Ltd is a Company of the
FAAC Simply Automatic Business Unit
page 9
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 9
2016-10-25 02:28:44 PM
D2 TURBO AND D2 TURBO LOW-VOLTAGE
DOMESTIC SLIDING GATE OPERATOR
The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 24
metres per minute and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up,
with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a
standard, domestic four metre gate.
The D2 Turbo Low-Voltage operator is designed specifically for sites with no mains at the gate to reduce installation costs while
delivering outstanding reliability, comprehensive functionality and selectable high or standard speeds. With the
D2 Turbo Low-Voltage, there is no need for costly high-voltage cable runs and expensive isolators, simply use a low-voltage
step-down transformer or solar power supply.
MAIN FEATURES
Mechanical Features
• Automatic closing with adjustable time delay, and
pushbutton override
• Battery backup
• Remote gate-status indicator (gate position, power failure,
low battery, multiple collision detection and Pillar Light Status
indication)
• Turbo speed for greater security and convenience
• Tough-as-nails steel pinion
• Very easy to install and set up, saving you time and money
• Pedestrian Opening
• Easy mounting with a revolutionary jacking system
• Holiday Lockout
• Lockable, easy manual override
• Courtesy/Pillar Light (fixed duration), with pre-delays and
two Pre-flashing Modes
• Modular components clip together for easy maintenance
Electronic Features
• Selectable gate speed modes – Low Speed/High Speed
(High Speed is the default)
• Simple user interface makes changing setup child’s play
• Positive Close Mode (e.g. to ensure activation of electric
fence contact switch)
• Insect-proof controller housing with removable terminals
• Multiple Modes of Operation with enhanced user interface
for exceptionally easy and versatile installation
• Adaptive Collision Sensing – intelligent enough to adapt to
changes in the track, but sensitive enough to keep your loved
ones safe
• Opening and Closing Safety Beam Inputs with beam circuit
functional test
• Onboard multichannel CENTURION code-hopping receiver
with the ability to learn remote control buttons to specific
functions (e.g. Gate Trigger, Pedestrian Opening, Holiday
Lockout)
• Low-voltage AC or DC input - perfect for installations where
there is no mains power at the gate
• Solar power-ready - energy-efficient, environmentally friendly
and offering greater autonomy
• High-security cleared beam Autoclose, in conjunction with
Safety Beams (PIRAC)
TM
TM
www.centsys.com
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 10
2016-10-25 02:28:59 PM
Technical Data
Input voltage
D2 Turbo
1
D2 Turbo Low-voltage
90V– 240V AC ±10%, 50Hz
Motor voltage
10V - 20V AC ±10%, 50Hz; 10V - 28V DC
12V DC
Motor power supply
4
12V DC
3
Battery-driven (standard capacity - 12V 5Ah)
Battery-driven (standard capacity - 12V 5Ah)
Intergral with controller 1A @ 13.7V +/- 1%
Intergral with controller 1A @ 13.7V +/- 1%
(Input voltage > 15V AC)
Current consumption (mains)
60mA
60mA
Current consumption
(motor at rated load)
8/12A
8/12A
Current consumption
(quiescent load)
95mA
95mA
18kgf
18kgf
Battery charger
1
SLIDING GATE
OPERATORS
TECHNICAL SPECIFICATIONS
Operator push force
Starting
Rated
Gate mass – maximum
Gate length - maximum
Gate speed - m/min
6
Gate speed - mm/sec
8kgf
8kgf
250kg
250kg
20m
20m
22 - 26m/min
22 - 26m/min
367 - 433mm/sec
367 - 433mm/sec
Drive Pinion
17T Module 4
17T Module 4
Maximum daily cycle
50 cycles/day
50 cycles/day
Design life
30 000 cycles
30 000 cycles
Half day
60 cycles
60 cycles
Full day
40 cycles
40 cycles
Collision sensing
Electronic
Electronic
-15°C to +50°C
-15°C to +50°C
Operations in standby with
standard battery 4, 5
Operating temperature
Degree of protection
IP54
IP54
Controller incorporated
D2 Controller_H
D2 Controller_L
Onboard receiver type
NOVA rolling code (KeelogTM encryption)
onboard, multichannel
NOVA rolling code (KeelogTM encryption)
onboard, multichannel
Receiver frequency
Receiver code storage capacity
Mass of unit packed
Packaging dimensions
433.92MHz
433.92MHz
32 transmitter buttons
32 transmitter buttons
5kg
5kg
Length: 255mm x Width: 188mm
x Height: 333mm
Length: 255mm x Width: 188mm
x Height: 333mm
120%
100%
3. Solar panel
4. Can increase battery capacity for longer standby times
5. Based on 4m gate with no external accessories such as infrared Safety
Beams
6. Gate operating speed can be configured to run at a slower, 16m/min,
depending on the requirements of individual installations
Duty cycle
1. Can operate off a solar supply, consult Centurion Systems for assistance
2. Plug-in transformer
80%
60%
40%
20%
0%
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Time (hrs)
DOMESTIC
SLIDING GATE
OPERATOR FOR
250KG GATES
page 11
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 11
2016-10-25 02:29:05 PM
7
8
8
5
1
2
2
3
4
6
1
3
9
CABLING REQUIREMENTS
1.
D2 Turbo: 220V - 240V AC mains cable via double mains isolator switch (3 core LNE 1.5mm2 SWA)1
D2 Turbo Low-Voltage: 10V - 20V AC cable via transformer in dwelling (3 core LNE 1.5mm2 Surfix)
Optional Wiring (all cable is multi-stranded):
2.
6
3
Intercom, cable from control box to dwelling (n1 + 6 core 0.5mm² multi-stranded) or cable from control box to entry panel
6
(n2 0.5mm² multi-stranded)
3.
Infrared Safety Beams (3 core 0.5mm² multi-stranded)
4.
4
Access control device (3 core 0.5mm² multi-stranded )
5.
Pedestrian keyswitch (2 core 0.5mm² multi-stranded) or
6.
Keypad (3 core 0.5mm² multi-stranded)
7.
5
External radio receiver (3 core 0.5mm² multi-stranded )
8.
2
Pillar Lights (3 core LNE SWA , size according to power requirements)
9.
6
Inductive loop detector for free-exit (1 core 0.5mm² multi-stranded - silicone-coated )
1. Possibly increase cable thickness if Pillar Lights are to be installed
5. For optimum range an external radio receiver can be mounted on the wall
2. SWA - steel wire armoured. Type of cable must adhere to municipal bylaws and
preferably be screened. Screening provides better protection against lightning earth one end of the screening
6. Number of cores required by the intercom
3. Allows for all features such as Pedestrian Opening, Status LED, etc. to be
operated from the intercom handset inside the dwelling
310mm
4. Number of cores and type of cable could vary depending on the brand of access
control system being used
94mm
A
60mm
244mm
page 12
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 12
170mm
A. To the centre of the tooth mesh point of the rack
www.centsys.com
2016-10-25 02:29:14 PM
SLIDING GATE
OPERATORS
CHOOSING THE RIGHT GATE MOTOR
Let’s say, hypothetically, that you have
finally grown tired of your old jalopy and
you’re in the market for a new, more
reliable, mode of transportation. Naturally,
there are a number of factors you would
consider and things you would weigh up
before finally settling on a car.
Is safety an important consideration for
you? Are you in the market for a family
sedan or a sports hatch? Are you looking
for something with superior fuel economy?
Similarly, when you’re preparing to have
your world rocked by the amazing security
and convenience provided by a gate motor,
there are some things you need to think
about to ensure that you get one that’s
right for your application. But don’t worry,
with some handy tips from your favourite
access automation company you’ll be
wielding that remote like a magical sceptre
in no time..
AC or DC
We’re not referring to the Australian rock
band of course (although our gate motors
have been known to rock!), but rather to
the form in which electric power is supplied
to your operator.
AC, or alternating
current, means that the gate motor is being
powered directly via the 230V mains supply
from a distribution board in your house.
DC, or direct current, on the other hand,
is a method of power delivery relying
on some sort of “power store” such as a
battery. You’ll find that the vast majority of
CENTURION gate motors are DC-operated.
And there’s a good reason for that. Power
delivery, especially in South Africa, is
unfortunately quite unreliable and we’ve
all borne the brunt of load shedding
before. Your gate motor, being the holder
of so many titles – security guard, butler,
etc. – needs to be on duty around the
clock, and DC units are able to continue
operation even during lengthy power
failures, whereas AC gate motors are not.
On the flipside of the coin, AC motors have
a virtually unlimited duty cycle and will
work tirelessly as long as they are being
fed mains. Both of these modes of power
delivery have their virtues, you simply need
to decide which is best suited for your
application. If you live in an area where
power outages are commonplace, a DC
unit is probably the best bet.
Weight of the Gate
Unless you’re an ant or former Governor
of California (and sometimes actor) Arnold
Schwarzenegger, you probably can’t carry
much more than your body weight. But
through the miracle of engineering gate
motors are able to relatively effortlessly
lug around several hundred times its own
weight.
But that doesn’t mean it should be
unrealistically loaded. Subjecting it to
that kind of abuse will invariably lead to
problems down the line, so first get an
approximation of what your gate weighs
before selecting a motor. The good news is
that gates are usually much, much lighter
than we think. For example, if you can lift
your gate to about the height of your shin,
chances are it doesn’t weigh much more
than 250kg.
Pull Force
This is more an extension of the previous
point than a whole new heading. Pull force
plays a monumental role in what gate
motor you install, and has a direct impact
on both the reliability and the service life of
the operator. If you struggle to open and
close your gate manually, be sure to choose
a device rated for a high push force such
as a D10.
The easiest and most accurate way to
determine the weight of the gate is to use
a pull scale as found in any angling goods
store.
Swing or Slide
This one might seem fairly obvious if you
already have a gate fitted, but if you’re
looking to install a gate where there isn’t
currently one this might warrant some
thought. The truth is that both swing and
sliding gate motors are equally rich in merit
and which one you choose to fit simply
depends on preference or, in the case of an
existing gate, what the setup necessitates.
If you are going with a swing gate,
remember to take into account factors like
the length of the individual leafs, wind
loading, etc.
If you follow these few simple selection
guidelines you’re assured of a gate motor
that’ll faithfully serve you for years to come.
And if you do get stuck, remember that our
technical support centre is open Monday
to Friday from 7am until 6pm. They’re
number is +2711 699 2451.
page 13
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 13
2016-10-25 02:29:20 PM
D5-EVO AND D5-EVO LOW-VOLTAGE
DOMESTIC AND LIGHT-INDUSTRIAL SLIDING GATE OPERATOR
D5-Evo: The light-industrial D5-Evo is an evolution of the tried and tested D5, 500kg operator for domestic and light-industrial
applications. Potent push force, along with intelligent speed control and smooth opening and closing, makes the D5-Evo the
automatic choice for large private residences and townhouse complexes requiring reliable, feature-rich gate automation.
D5-Evo Low-voltage: This variant enables you to enjoy all the amazing features and functionality of the flagship
D5-Evo – even if you don’t have mains power at the gate. All that is needed to breathe life into the feature-rich LCD controller
is a low-voltage input, easily obtainable via a step-down transformer, dramatically reducing installation costs.
MAIN FEATURES
Mechanical Features
• Battery backup
• Intelligent speed control - high-speed for greater security
and convenience; slower speed for inreased safety.
• Lockable, easy manual override
• Local test button can be deactivated for added security
• Custom-engineered gearbox molded from durable
engineering polymer
• Sensitive anti-crushing protection for greater safety
• Save on cabling costs - no thick, expensive high-voltage
cables (D5-Evo Low voltage)
• No need to fit costly isolators (D5-Evo Low-voltage)
Electronic Features
• LCD interface - exceptionally easy setup with visual and
audible fault-finding and notification
• Advanced diagnostic screens indicating:
• Battery-low
• Integrated ChronoGuard timer functionality (a world first) Time-barring and Autoactivation features for switching on
Pillar Lights, deactivating ground loops, etc.
• Multiple operating features including Intruder-detection
Alarm Modes (a world first)
• Remote gate-status indicator (gate position, power failure,
low battery, multiple collision detection and Pillar Light Status
indication)
• Onboard multichannel CENTURION code-hopping receiver
incorporating the following functionality:
• Battery charge level
• Selective add and delete
• Fuse blown
• Onboard receiver can be disabled
• High current draw
• 500 transmitter button memory
• Details of the last transmitter activated
• Automatic maintenance features like Delete-Not-Present
• Health of the drive electronics
• Opening and Closing Safety Beam Inputs
• Currently-activated gate inputs
• Integrated Beam Test hardware to ensure the beams are
always working correctly
• See Diagnostics Made Easy for further details
TM
www.centsys.com
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 14
2016-10-25 02:29:24 PM
Technical Data
D5-Evo
Input voltage
D5-Evo Low-voltage
220V AC +/-10% @ 50Hz
Motor voltage
Motor power supply 4
Battery charger
1
15V - 19V AC
2, 3
12V DC
12V DC
Battery-driven (standard capacity - 12V 7Ah)
Battery-driven (standard capacity - 12V 7Ah)
CP84SM – 1.8A @ 13.7 +/-1%
CP84XTE – 800mA @ 13.7 +/- 1%
Current consumption (mains supply)
60mA
60mA
Current consumption
(motor rated / peak load)
8/15A
8/15A
Current consumption
(quiescent load)
75mA
75mA
Starting
30kgf
30kgf
Rated
17kgf
17kgf
500kg
500kg
Operator push force
Gate mass – maximum
Gate length - maximum
Gate speed - m/min
100m
6
100m
18 - 22m/min
Gate speed - mm/sec
18 - 22m/min
300 - 367mm/sec
300 - 367mm/sec
Drive Pinion
17T Module 4
17T Module 4
Maximum daily cycle
150 cycles/day
150 cycles/day
150 000 cycles
150 000 cycles
Half day
70 cycles
70 cycles
Full day
60 cycles
60 cycles
Collision sensing
Electronic
Electronic
-15°C to +50°C
-15°C to +50°C
Design life
Operations in standby with standard battery
Operating temperature
Degree of protection
4, 5
IP54
IP54
Controller incorporated
D-Series_12
D-Series_12
Onboard receiver type
NOVA rolling code (KeelogTM encryption)
onboard, multichannel
NOVA rolling code (KeelogTM encryption)
onboard, multichannel
Receiver frequency
Receiver code storage capacity
Mass of unit packed
Packaging dimensions
433.92MHz
433.92MHz
125 transmitter buttons
125 transmitter buttons
10kg
10kg
Length:303mm x Width: 231mm
x Height: 432mm
Length:303mm x Width: 231mm
x Height: 432mm
120%
100%
3. Solar panel
4. Can increase battery capacity for longer standby times
5. Based on 4m gate with no external accessories such as infrared Safety
Beams
Duty cycle
1. Can operate off a solar supply, consult Centurion Systems for assistance
2. Plug-in transformer
SLIDING GATE
OPERATORS
TECHNICAL SPECIFICATIONS
80%
60%
40%
20%
0%
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Time (hrs)
LIGHT-INDUSTRIAL
SLIDING GATE
OPERATOR FOR
500KG GATES
page 15
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 15
2016-10-25 02:29:27 PM
8
7
8
5
1
2
3
2
3
4
6
1
9
CABLING REQUIREMENTS
1.
D5-Evo: 220V - 240V AC mains cable via double mains isolator switch (3 core LNE 1.5mm2 SWA)1
D5-Evo Low-Voltage: 15V - 19V AC cable via transformer in dwelling (3 core LNE 1.5mm2 Surfix)
Optional Wiring (all cable is multi-stranded):
2.
Intercom, cable from control box to dwelling (n16 + 6 core3 0.5mm² multi-stranded) or cable from control box to entry panel
(n26 0.5mm² multi-stranded)
3.
Infrared Safety Beams (3 core 0.5mm² multi-stranded)
4.
Access control device (3 core 0.5mm² multi-stranded4)
5.
Pedestrian keyswitch (2 core 0.5mm² multi-stranded) or
6.
Keypad (3 core 0.5mm² multi-stranded)
7.
External radio receiver (3 core 0.5mm² multi-stranded5)
8.
Pillar Lights (3 core LNE SWA2, size according to power requirements)
9.
Inductive loop detector for free-exit (1 core 0.5mm² multi-stranded - silicone-coated6)
1. Possibly increase cable thickness if Pillar Lights are to be installed
2. SWA - steel wire armoured. Type of cable must adhere to municipal bylaws and
preferably be screened. Screening provides better protection against lightning earth one end of the screening
5. For optimum range an external radio receiver can be mounted on the wall
6. Number of cores required by the intercom
341mm
3. Allows for all features such as Pedestrian Opening, Status LED, etc. to be
operated from the intercom handset inside the dwelling
4. Number of cores and type of cable could vary depending on the brand of access
control system being used
60mm
250mm
page 16
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 16
160mm
94mm
A
A. To the centre of the tooth mesh point of the rack
www.centsys.com
2016-10-25 02:29:40 PM
SLIDING GATE
OPERATORS
SOLAR-POWERED
GATE MOTOR
Use the power of the sun to keep your
gate motor going on and on and on
and on and on and on and on!
• Powerful low-voltage motors and solar power are a
perfect combination!
• Cost-effective automation solution - save on installation
and electricity costs
100
• Complete power failure autonomy with solar power:
off-the-grid and on-charge!
95
TM
• Environmentally-friendly - save the world, get75a
CENTURION!
• CENTURION supplies solar panels, brackets, regulators,
deep-cycle batteries and battery enclosures - 25meeting
your every solar need
5
0
05, 2014 10:41:18 PM
DURABILITY
•
SECURITY
•
RELIABILITY
page 17
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 17
2016-10-25 02:29:43 PM
D10 AND D10 TURBO
INDUSTRIAL SLIDING GATE OPERATOR
D10: Using CENTURION’s proven 24V DC technology, this is the complete solution for commercial and industrial gates weighing
up to 1000kg. A rock-solid die-cast aluminium gearbox and reliable battery backup make the D10 ideally-suited for complexes
with large gates and high traffic volumes, while an intelligent LCD controller with multiple Modes of Operation makes setup and
diagnostics veritable child’s play.
D10 Turbo: CENTURION’s fastest operator yet! This is the ideal solution for extremely fast, feature-rich and high-security gate
automation. With a top speed of 50 metres per minute and all the amazing features that first made the D10 a favourite among
installers and end-users alike, the D10 Turbo offers the complete package of brains, brawn and expeditious speed.
MAIN FEATURES
Mechanical Features
• Battery backup
• See Diagnostics Made Easy for further details
• Lockable, easy manual override with anti-jamming
• High duty cycle capability - for greater reliability in
high-volume applications
• Strong die-cast aluminium gearbox
• Sensitive anti-crushing protection for greater safety.
• High-volume capability - for greater reliability in
intensive use applications
• Intelligent speed control - high-speed for greater security and
convenience; slower speed for increased safety
Electronic Features
• Integrated ChronoGuard time functionality (a world first) Time-barring and auto-activation features for switching on
Pillar Lights, deactivating ground loops, etc.
• Turbo speed for greater security and convenience (D10 Turbo)
• LCD interface – Exceptionally easy setup with visual and
audible diagnostics and notification
• Diagnostic screens indicating:
• Battery-low
• Multiple operating features, including Intruder-detection
Alarm Modes (a world first)
• Onboard CENTURION code-hopping multichannel receiver
incorporating the following functionality:
• Battery charge level
• Selective add and delete
• Motor fuse blown
• Onboard receiver can be disabled
• High current draw
• 500 transmitter button memory
• Details of the last transmitter activated
• Automatic maintenance features like Delete-Not-Present
• Health of the drive electronics
• Opening and Closing Safety Beam Inputs
• Currently activated gate inputs
• Integrated Beam Test hardware to ensure that the beams are
always working correctly
TM
www.centsys.com
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 18
2016-10-25 02:30:01 PM
Technical Data
Input voltage
D10
1
D10 Turbo
220V AC +/-10% @ 50Hz
Motor voltage
Motor power supply 2
Battery charger
220V AC +/-10% @ 50Hz
24V DC
24V DC
Battery-driven (standard capacity - 2 x 7Ah)
Battery-driven (standard capacity - 2 x 7Ah)
D10CHGRV02 – 1.8A @ 27.4V +/- 1%
D10CHGRV02 – 1.8A @ 27.4V +/- 1%
Current consumption (mains supply)
250mA
250mA
Current consumption
(motor rated / peak load)
6/15A
8/15A
Current consumption
(quiescent load)
80mA
80mA
Operator push force
Starting
40kgf
20kgf
Rated
30kgf
15kgf
1000kg
240kg
Gate mass – maximum
Gate length - maximum
100m
50m
Gate speed - m/min
22 - 26m/min
Gate speed - mm/sec
43 - 51m/min
367 - 433mm/sec
717 - 850mm/sec
Drive Pinion
17T Module 4
20T Module 4
Maximum daily cycle
750 cycles/day
750 cycles/day
250 000 cycles
250 000 cycles
Half day
120 cycles
120 cycles
Full day
100 cycles
100 cycles
Collision sensing
Electronic
Electronic
-15°C to +50°C
-15°C to +50°C
Design life
Operations in standby with standard battery
4, 5
Operating temperature
Degree of protection
IP54
IP54
Controller incorporated
D-Series_24
D-Series_24
Onboard receiver type
NOVA rolling code (KeelogTM encryption)
onboard, multichannel
NOVA rolling code (KeelogTM encryption)
onboard, multichannel
Receiver frequency
Receiver code storage capacity
Mass of unit packed
Packaging dimensions
SLIDING GATE
OPERATORS
TECHNICAL SPECIFICATIONS
433.92MHz
433.92MHz
125 transmitter buttons
125 transmitter buttons
13kg
13kg
Length:355mm x Width: 288mm
x Height: 485mm
Length:355mm x Width: 288mm
x Height: 485mm
1. Can operate off a solar supply, consult Centurion Systems for assistance
4. Can increase battery capacity for longer standby times
2. Plug-in transformer
5. Based on 4m gate with no external accessories such as infrared Safety
Beams
3. Solar panel
D10 Turbo maximum operating speed for corresponding gate mass
Maximum running speed
240kg
300kg
400kg
500kg
600kg
700kg
800kg
900kg
1000kg
50m/min
42m/min
36m/min
32m/min
29m/min
27m/min
25m/min
24m/min
23m/min
120%
100%
Duty cycle
Gate mass
80%
60%
40%
20%
0%
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Time (hrs)
INDUSTRIAL
SLIDING GATE
OPERATOR FOR
1000KG GATES
page 19
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 19
2016-10-25 02:30:15 PM
7
8
8
5
1
2
3
2
4
6
1
3
9
CABLING REQUIREMENTS
1.
220V - 240V AC mains cable via double pole mains isolator switch (3 core1 LNE 1.5mm2 SWA2 )
Optional Wiring (all cable is multi-stranded):
2.
Intercom, cable from control box to dwelling (n16 + 6 core3 0.5mm² multi-stranded) or cable from control box to entry panel
(n26 0.5mm² multi-stranded)
3.
Infrared Safety Beams (3 core 0.5mm² multi-stranded)
4.
Access control device (3 core 0.5mm² multi-stranded4)
5.
Pedestrian keyswitch (2 core 0.5mm² multi-stranded) or
6.
Keypad (3 core 0.5mm² multi-stranded)
7.
External radio receiver (3 core 0.5mm² multi-stranded5)
8.
Pillar Lights (3 core LNE SWA2, size according to power requirements)
9.
Ground loop for free-exit (1 core 0.5mm² multi-stranded - silicone-coated6)
1. Possibly increase cable thickness if Pillar Lights are to be installed
2. SWA - steel wire armoured. Type of cable must adhere to municipal bylaws and
preferably be screened. Screening provides better protection against lightning earth one end of the screening
5. For optimum range an external radio receiver can be mounted on the wall
6. Number of cores required by the intercom
387mm
3. Allows for all features such as Pedestrian Opening, Status LED, etc. to be
operated from the intercom handset inside the dwelling
4. Number of cores and type of cable could vary depending on the brand of access
control system being used
D10 - 101mm
67mm
300mm
page 20
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 20
245mm
A
D10 Turbo - 107mm
A
A. To the centre of the tooth mesh point of the rack
www.centsys.com
2016-10-25 02:30:32 PM
IT’S
ROCKET SCIENCE
Well-known star of action movies and bona
fide Scandinavian Dolph Lundgren is a bit of
a rarity in the world of action cinema. The
Swedish muscle man is perhaps best-known
for his role as Ivan Drago in Rocky IV, and
he’s had starring roles in pretty much every
movie featuring explosions and rogue spies
from obscure countries since time immemorial.
But what makes this Nordic beefcake such an
enigma is the fact that, in addition to being a
prolific actor and holder of a third dan black
belt in Kyokushin karate, Lundgren also holds a
master’s degree in chemical engineering from
the University of Sydney. Dolph Lundgren is
truly the epitome of someone possessing both
brains and brawn.
Similarly, CENTURION’s D10 Turbo industrial
sliding gate motor is an ode to the marriage of
strength and intelligence. Add blistering speed
to the mix, and what you have is a true legend
of access automation.
The D10 Turbo first sped onto the scene in
2011 – initially a concept design created by
using the D10 motor with an A10 gearbox –
and today, five years later, this expeditious
beast is showing no signs of slowing down.
The fastest intelligent gate motor
around
Capable of operating at a rollercoastershaming 830cm/sec, the D10 Turbo is the
perfect gate motor for the security conscious
wanting to get into and out of their properties
as quickly as possible. A disconcerting number
of hijackings and robberies occur while victims
are idle in their driveways, waiting for their
gates to open, which makes it all the more
important that one doesn’t become a sitting
duck. The operator lends itself perfectly to full
control, with individually configurable opening
and closing speeds.
Intelligence in motion
The D10 Turbo has around 80 features
onboard – all housed within a neat, intuitive and
user-friendly LCD interface – including a builtin receiver with 500 remote button memory,
Intruder-detection Alarms and, of course, the
novel ChronoGuard timer technology.
Gentle giant
Of course, despite being known for playing
tough guy roles in high-octane blockbusters
such as The Expendables, Dolph Lundgren is
also a loving father of two girls, and probably
loves kittens. Probably. Likewise, the D10
Turbo – while being a powerful titan capable of
moving a 4m gate in approximately 5 seconds
– also has a softer, more tempered side.
Boasting built-in sensitive collision detection
and sophisticated anti-crushing technology, the
D10 Turbo is designed to reverse at the first
sign of a collision, which means that it plays
nice with kiddies, pets and, of course, your
precious Beemer. Additionally, the intelligent
controller provides inputs for both opening and
closing safety beams.
page 21
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 21
2016-10-25 02:30:46 PM
A10 ENDURANCE AND A10 HEAVYWEIGHT
INDUSTRIAL SLIDING GATE OPERATOR
Using a powerful three-phase motor, the A10 is the ultimate industrial automation solution. Since this beast is mains-powered,
it is able to provide an almost unlimited duty cycle with rapid opening and closing courtesy of a die-cast aluminium gearbox and
intelligent controller-inverter pairing.
AVAILABLE MODELS
A10 Endurance:
A rapid and robust operator with a three-phase motor for commercial and industrial gates up to 1000kg
A10 Heavyweight:
An all-round performer for gates up to 2000kg
MAIN FEATURES
Mechanical Features
• Integrated battery charger
• High push force for reliable operation of almost any gate
• Proven lightning protection
• High duty cycle capability - for greater reliability in
high-volume applications
• Pedestrian Opening input – prevents unauthorised vehicle
access
• Strong die-cast aluminium gearbox with anti-jamming
• Safety Beam input – connecting infrared Safety Beams
dramatically increases the safety of the automated system
Electronic Features
• Extremely rapid operating speed - up to 30 metres per
minute offers exceptional security and high-volume access
control
• Multiple programmable features - to suit a wide variety of
applications
• Optional DC Converter for reliable battery backup with full
kit (DC_CONKITL):
• On-demand battery backup protection
• Brown-out power failure detection
• Local and remote multi-function Gate Status LED
• Free-exit input (only opens gate)
• Timed potential-free contact (e.g. Courtesy Lights)
• Selectable/adjustable Autoclose timer (1 - 255 seconds)
• Override of Autoclose timer via trigger input
• Local diagnostic LEDs for easy programming diagnostics
• 12V DC auxiliary supply connecting Safety Beams, external
receivers, keypads, etc.
• Battery-protection circuitry
TM
www.centsys.com
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 22
2016-10-25 02:30:52 PM
Technical Data
Input voltage 1
A10 Endurance
A10 Heavyweight
220V AC +/-10% @ 50Hz
220V AC +/-10% @ 50Hz
Motor voltage
220V AC 3 phase
220V AC 3 phase
Motor power supply 2
Frequency inverter
Frequency inverter
6A
6A
Current consumption (mains supply)
Operator push force 2
Starting
40kgf
25kgf
Rated
30kgf
22.5kgf
35kgf
1000kg
600kg
240kg
Gate mass – maximum
Gate length - maximum
20m
Gate speed - m/min
16m/min
Gate speed - mm/sec
267mm/sec
Drive Pinion
Maximum daily cycle
Design life
Collision sensing
Operating temperature
Mass of unit packed
Packaging dimensions
50m
30m/min
43 - 51m/min
500mm/sec
717 - 850mm/sec
20T Module 4
20T Module 4
Lockable lever with key release
750 cycles/day
1 000 000 cycles
250 000 cycles
Electronic
Electronic
-20°C to +50°C
-15°C to +50°C
Degree of protection
Controller incorporated
47kgf
SLIDING GATE
OPERATORS
TECHNICAL SPECIFICATIONS
IP54
IP54
CP200E / CP201
D-Series_24
15.5kg
13kg
Length:355mm x Width: 288mm
x Height: 485mm
Length:355mm x Width: 288mm
x Height: 485mm
Technical Data
DC Converter
Input voltage
12V DC
Current draw @ rated thrust
30A
Rated output voltage
310V DC
2A
Battery charger output
Duty cycle 2
20%
Thermal protection
Electronic
Degree of protection
Battery capacity 3
IP65
Minimum 12V 7Ah but external 35Ah is recommended
Operating cycles per Ah of capacity
Packaging dimensions
Minimum 1 open or close cycle
Length: 269mm x Width: 145mm x Height: 365mm
120%
100%
3. Battery housed in separate enclosure
Duty cycle
1. Can operate off a solar supply, consult Centurion Systems for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
80%
60%
40%
20%
0%
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Time (hrs)
INDUSTRIAL
SLIDING GATE
OPERATOR FOR
HEAVY GATES
page 23
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 23
2016-10-25 02:30:55 PM
7
8
8
5
1
3
1
2
4
6
2
3
9
CABLING REQUIREMENTS
1.
220V - 240V AC mains cable via double pole mains isolator switch (3 core1 LNE 1.5mm2 SWA 2 )
Optional Wiring (all cable is multi-stranded):
2.
Intercom cable from control box to dwelling (n16 + 6 core2 0.5mm² multi-stranded) or cable from control box to entry panel
(n26 0.5mm² multi-stranded. Infrared Safety Beams (3 core 0.5mm² multi-stranded)
3.
Access control device (3 core 0.5mm² multi-stranded4)
4.
Pedestrian keyswitch (2 core 0.5mm² multi-stranded) or
5.
Keypad (3 core 0.5mm² multi-stranded)
6.
External radio receiver (3 core 0.5mm² multi-stranded5)
7.
Pillar Lights (3 core LNE SWA2, size according to power requirements)
8.
Inductive loop detector for free-exit (1 core 0.5mm² multi-stranded - silicone-coated6)
1. Possibly increase cable thickness if Pillar Lights are to be installed
2. SWA - steel wire armoured. Type of cable must adhere to municipal bylaws and
preferably be screened. Screening provides better protection against lightning earth one end of the screening
5. For optimum range an external radio receiver can be mounted on the wall
6. Number of cores required by the intercom
387mm
3. Allows for all features such as Pedestrian Opening, Status LED, etc. to be
operated from the intercom handset inside the dwelling
4. Number of cores and type of cable could vary depending on the brand of access
control system being used
D10 - 101mm
A
67mm D10 Turbo - 107mm
300mm
page 24
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 24
245mm
A
A. To the centre of the tooth mesh point of the rack
www.centsys.com
2016-10-25 02:31:07 PM
SLIDING GATE
OPERATORS
The fastest intelligent
gate motor on the
planet!
The D10 Turbo - for the ultimate in
security and convenience
• Turbo speed - up to 50m/min (833mm/sec).
• High volume capability - 750 operations per day
• Multiple operating features, modes and functionality,
including Intruder-detection Alarm Modes - a world first
• Reliable battery backup
DURABILITY
•
SECURITY
•
RELIABILITY
page 25
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 25
2016-10-25 02:31:12 PM
SLIDING GATE OPERATOR ACCESSORIES
I
J
N
L
H
A
STEEL, NYLON RAZ OR NYLON ANGLE RACK
A variety of rack available in different lengths,
for different strengths.
C
P36 PASSIVE SENSITIVE EDGE
Passive sensitive edge provides additional
protection against crushing.
F
A
E
H
B
B
CENTURION INFRARED BEAMS
Always recommended on any gate automation
installation to increase the safety of the
automated system.
D
THEFT-RESISTANT CAGE
Retro-installable steel cage that increases the
resistance of the operator against theft.
E
FLUX SA LOOP DETECTOR
Allows free-exit of vehicles from the property
(requires ground loop to be fitted)
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 26
K
C
D
page 26
O
B
G
B
M
P
F
CENTURION TRANSMITTER
Incorporates ultra-secure code-hopping
technology. Available in one-, two-, three- and
four-button variants.
www.centsys.com
2016-10-25 02:31:24 PM
BACKUP MEMORY MODULE
Back up all the transmitters and operating
details set up in the controller.
H
WHEEL KITS
A variety of wheel kits are available from
Centurion Systems.
J
I
SOLAR SUPPLY
Alternative means of powering the system with
our 20, 40, 60, 80, 120 or 150 Watt panel.
G-SWITCH-22 GSM DEVICE
Allows for monitoring and activating the
operator, via your phone, from anywhere in
the world with GSM coverage.
K
SMARTGUARD or SMARTGUARDAIR KEYPAD
Cost-effective and versatile wired or wireless
keypad, allowing access for pedestrians.
M
L
A10 DC CONVERTER
Provides battery backup and power failure
autonomy for the A10 operator.
N
POLOPHONE INTERCOM
Allows visitors to communicate with people
inside in order to gain access to the property.
GOOSENECK
Steel pole for mounting intercom gate station
or access control.
O
P
SOLO/LATTICE PROXIMITY ACCESS CONTROL
Proximity reader for allowing access for both
pedestrians and vehicles.
SLIDING GATE
OPERATORS
G
G-SPEAK GSM Intercom
Mobile-based intercom system - answer your
intercom from anywhere in the world for
maximum security and convenience.
page 27
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 27
2016-10-25 02:31:34 PM
SLIDING GATE OPERATOR KITS
D2 TURBO FULL KIT
1
D2 TURBO LOW-VOLTAGE FULL KIT
Product Code: D2TFULLKIT_RAZ1 / D2TFULLKIT_ NYLON1
D2TFULLKIT_STEEL1
Product Code: D2TFULLKIT_RAZ1LV / D2TFULLKIT_ NYLON1LV
D2TFULLKIT_STEEL1LV
• 1 x D2 Turbo operator including:
• 2 x 4 button CENTURION transmitters F
• 1 x Foundation plate O
• 1 x Controller A
• 1 x Integral 1A charger J
• 1 x 5Ah battery M
• 4m x RAZ rack/Steel rack/Nylon angle rack
• 1 x D2 Turbo operator including:
• 2 x 4 button CENTURION transmitters F
• 1 x Foundation plate O
• 1 x Controller B
• 1 x 800mA charger J
• 1 x 5Ah battery M
• 4m x RAZ rack/Steel rack/Nylon angle rack
Q/R/S
D5-EVO FULL KIT
2
Product Code: D5EVOFK_RAZ1 / D5EVOFK_STEEL2 / D5EVOFK_NYLON2
• 1 x D5-Evo operator including:
• 2 x 4 button CENTURION transmitters F
• 1 x Foundation plate P
• 1 x Controller C
• 1 x 2A charger K
• 1 x 7Ah Battery N
• 4m x RAZ rack/Steel rack/Nylon angle rack
D10 FULL KIT
3
Product Code: D101R • 1 x D10 Turbo operator including:
• 1 x Foundation Plate T
• 1 x Controller D
• 1 x 2A 24V charger K
• 2 x 7Ah Battery N
• 4m x Steel rack R
D10 TURBO PART KIT
Q/R/S
D5-EVO LOW-VOLTAGE FULL KIT
2
Product Code: D5EVOFK_RAZ1LV / D5EVOFK_STEEL2LV /
D5EVOFK_NYLON2LV
• 1 x D5-Evo operator including:
• 2 x 4 button CENTURION transmitters F
• 1 x Foundation Plate P
• 1 x Controller C
• 1 x 800mA charger J
• 1 x 7Ah battery N
• 4m x RAZ rack/Steel rack/Nylon angle rack
Q/R/S
Q/R/S
D10 TURBO FULL KIT
3
Product Code: D101T_FULL KIT
• 1 x D10 Turbo operator including:
• 1 x Foundation Plate T
• 1 x Controller D
• 1 x 2A 24V charger K
• 2 x 7Ah Battery N
• 4m x Steel rack R
• 2 x Sets i5 Safety Beams G
• 2m x Passive sensitive edge H
3
A10 ENDURANCE KIT
3
Product Code: D101T_PART KIT
Product Code: A10ER
• 1 x D10 Turbo operator including:
• 1 x Foundation Plate R
• 1 x Controller D
• 1 x 2A 24V Charger K
• 2 x 7Ah Battery M
• 2 x Sets i5 Safety Beams G
• 2m x Passive sensitive edge H
• 1 x A10 Turbo operator (20T Pinion) including:
• 1 x Foundation Plate T
• 1 x CP201 Controller E
• 1 x CP200 Inverter I
• 4m x Steel rack R
A10 HEAVYWEIGHT KIT
1
4
Product Code: A10GR
• 1 x A10 Operator (17T Pinion) including:
• 1 x Foundation Plate T
• 1 x CP201 controller E
• 1 x CP200 Inverter I
• 4m x Steel rack R
page 28
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 28
www.centsys.com
2016-10-25 02:31:34 PM
SLIDING GATE
OPERATORS
1
D2 Turbo/D2 Turbo
Low-Voltage
2
D5-Evo/D5-Evo
Low-Voltage
3
A
D2 Turbo
controller
B
E
CENTURION
transmitter
A10
inverter
5Ah
battery
K
N
Q
L
2A 24V
charger
O
D2 Turbo/D2 Turbo
Low-voltage
foundation plate
R
Steel rack
H
Passive Sensitive
Edge
2A Switch Mode
charger
7Ah
battery
RAZ rack
G
J
M
D
D10
controller
CENTURION
infrared beams
800mA XT
charger
A10 Endurance
A10 Heavyweight
C
F
I
4
D5-Evo
controller
D2 Turbo Low-voltage
controller
CP201 A10
controller
D10/D10 Turbo
P
D5-Evo/D5-Evo
Low-voltage
foundation plate
S
Nylon angle rack
T
D10/D10 Turbo/A10
foundation plate
page 29
0.07.A.0240 Full_Product_catalogue_23052016BM.indb 29
2016-10-25 02:31:58 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement