e-Tender - Madhya Pradesh Skill Development Mission

e-Tender - Madhya Pradesh Skill Development Mission
e-Tender | Supply of
Tools & Equipments for
Govt. ITIs of Indore
Zone e-Tender
TENDER NO: JDSD-IND/PUR/2015-16/ 01
FOR THE YEAR
2015-2016
OFFICE OF THE JOINT DIRECTOR
SKILL DEVELOPMENT (ITI) – INDORE ZONE
WITI CAMPUS NANDANAGAR INDORE
Phone +91-0731-2556720, E-Mail:[email protected], Website:www.mpdt.nic.in
Table of Contents
1.
Tender Notice (NIT)............................................................................................................................................... 1
2.
Tender Rules ............................................................................................................................................................. 3
3.
2.1.
Scope of Tender ............................................................................................................................................. 3
2.2.
Eligibility Criterion ....................................................................................................................................... 3
2.3.
Earnest Money Deposit (EMD) ................................................................................................................ 3
2.4.
Validity of Tender.......................................................................................................................................... 4
2.5.
Preparation and submission of Tender................................................................................................ 4
2.6.
Tender Prices .................................................................................................................................................. 5
2.7.
Deviation ........................................................................................................................................................... 5
2.8.
Opening of Tenders ...................................................................................................................................... 5
2.9.
Evaluation of Tenders ................................................................................................................................. 6
2.10.
Award of Contract .................................................................................................................................... 6
2.11.
Placement of Purchase Orders and Delivery Requirements .................................................. 6
2.12.
Quality Testing Requirements: ........................................................................................................... 7
2.13.
Payment Terms ......................................................................................................................................... 7
2.14.
Penalty Conditions ................................................................................................................................... 7
2.15.
Settlement of Disputes ........................................................................................................................... 7
E-TENDERING PROCESS ...................................................................................................................................... 9
3.1.
Registration of Bidders on e-Procurement System......................................................................... 9
3.2.
Digital Certificates......................................................................................................................................... 9
3.3.
Set Up of Bidders' Computer System ................................................................................................. 10
3.4.
Publishing of N.I.T. ..................................................................................................................................... 10
3.5.
Key Dates and time .................................................................................................................................... 10
3.6.
Downloading of the Tender Documents ........................................................................................... 10
3.7.
Payment for registration on E-tendering portal ........................................................................... 10
3.8.
Payment of tender document fee......................................................................................................... 10
3.9.
Preparation of Bids and Submission of Online Bids by the Bidders ..................................... 10
3.10.
Submission of Earnest Money Deposit ......................................................................................... 11
3.11.
Opening of Tender ................................................................................................................................ 11
3.12.
For any further queries, bidders may kindly contact ............................................................. 11
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
1. Tender Notice (NIT)
e-Tender Notice
The Joint Director, Skill Development (ITI) – Indore Zone, WITI Campus
Nandanagar,Indore M.P. Invites online bids (Two bid system) from Manufacturers or Authorized
dealers for Supply of Tools &Equipments for ITIs of Indore Zone asbelow :
Package No
Description
Earnest Money Deposit Bid Document Price
01
Computer
INR 50000
INR 1000
02
Electrical
INR 50000
INR 1000
03
Mechanical (Equipments)
INR 50000
INR 1000
04
Mechanical (Tools)
INR 100000
INR 1000
2. Online bidding go through https://www.mpeproc.gov.in and online e-tenders are
invited as per key dates from Manufacturers or their Authorized Dealersfor Supply of
Tools &Equipments for ITIs of Indore Zone Madhya Pradesh. Tender document and other
details are also available at the websites https://www.mpeproc.gov.in,
www.tender.gov.in and www.mpdt.nic.in
3. In all respect hard copy of the Earnest money must be received at the office of the
undersigned latest by 3:00 PM on 12-01-2016 and will be opened ONLINE Technical
Tender on the same day i.e. 12-01-2016 at 3:00 PM. In the presence of such tenderer or
their authorized representatives as may be present.
4. All corrigendum/ amendments/changes if any will only be issue and made available only on
https://www.mpeproc.gov.in.
(D.S.THAKUR)
Joint Director
Page
1
Skill Development Indore
Joint Director Skill Development – Indore Zone
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
Key Dates and Time
SN
Task
Date & Time
1.
ONLINE
BID
DOCUMENT
11/01/2016, 16:00 HRS
PURCHASING END DATE
2.
BID CLOSING FOR SUBMISSION
11/01/2016, 14:00 HRS
ON ONLINE BIDS
3.
SUBMISSION OF HARD COPY
OF BIDS along with EMD 12/01/2016, 15:00 HRS
(Envelope – A)
4.
ONLINE OPENING
TECHNICAL BIDS
OF
THE
5.
ONLINE OPENING
FINANCIAL BIDS
OF
THE
12/01/2016, 15:00 HRS
14/01/2016, 11:00 HRS
Page
2
Note: Soft copy (In prescribed Excel & Word Format) and Hard Copy of the Bid should be same, in
case of any difference/discripency Soft Copy will be considered.
Joint Director Skill Development – Indore Zone
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
2. Tender Rules
2.1.Scope of Tender
The Joint Director, Skill Development (ITI) –Indore Zone, WITI Campus Nandanagar, Indore M.P.
(hereinafter referred as Tender Inviting Authority and/or Tender Acceptance Authority and/or
Ordering Authority unless the context otherwise requires) Invites online bids (Two bid system)
from Manufacturers or Authorized dealers for Supply of Tools &Equipments for ITIs of Indore
Zone as below :
Package No
Description
Earnest Money Deposit Bid Document Price
01
Computer
INR 50000
INR 1000
02
Electrical
INR 50000
INR 1000
03
Mechanical (Equipments)
INR 50000
INR 1000
04
Mechanical (Tools)
INR 100000
INR 1000
2.2.Eligibility Criterion
The Tenderers should fulfil the following eligibility criteria:
a) The Tenderer should be Manufacturer or Authorized Dealer having relevant Licence of
Manufacturer/ Authorized Dealer and such a Registration should be valid as on the date
of Tender submission. Annexure -1
b) Tenderer should submit item wise ISI/ISO certificate valid at the time and date of bid
submission, issued by competent authority.
c) The Tenderer should have achieved annual turnover of Rs.20 Lakh (every FY) in the last
three financial years, backed by practicing chartered accountant.
d) The Tenderer (and tenderer’s principal manufacturer, if tenderer is Authorized Dealer)
should not be blacklisted either by the Tender Inviting Authority or by any State
Government or by Government of India. An undertaking by the tenderer should be
submitted in this regard certifying that the tenderer or its principal manufacturer (if
applicable) is eligible to participate in the bid process.
e) The Manufacturer should be in the business of manufacturing of similar equipment for a
period not less than 5 Years.
f) The Tenderer should furnish the information on past 3 years supplies and satisfactory
performance in Annexure – 2.
g) The Tenderermust submit the latest Sales Tax clearance certificate.
h) The Tenderermust submit the Form – “A” on letterhead with signature & stamp.
Joint Director Skill Development – Indore Zone
Page
a) All tenders must be accompanied with Package-wise EMD (Hard Copy) along with
Technical (Physical) bid.
b) The EMD should be submitted in form Demand Draft of Nationalized Bank/Scheduled
Bank in Favour of “Joint Director, Skill Development, Indore” Earnest Money submitted
in any other form will not be accepted and the tender will be rejected.
c) Earnest Money/Security Deposit to this office in previous tenders will not be adjusted
3
2.3.Earnest Money Deposit (EMD)
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
towards the present tender and no request will be entertained in this regard.
d) Industries registered as Small scale industrial units with the Director of Industries,
Government of Madhya Pradesh, Indore only will be exempted from depositing the
Earnest money; however they should send a true copy of the certificate for claiming the
above exemption. Firms registered with the Director General of Supplies and Disposals
and small Scale Industrial Units registered with Central Govt. or with other State
Government are not exempted from depositing earnest money.
e) The EMD of all unsuccessful Tenderers shall be returned within 7 days of signing of
contract with successful Tenderer(s).
f) The EMD of successful Tenderer shall be returned after signing of contract by successful
Tenderer(s).
g) The EMD will be forfeited, in case Tenderer withdraws its Tender during the validity of
bids OR the successful bidder who fails to sign the contract agreement.
2.4.Validity of Tender
a) The Tender will be valid for a period of 90 days after the due date of submission of
Tenders. A Tender valid for a shorter period shall be rejected by the Tender Inviting
Authority as non-responsive
b) In exceptional circumstances, prior to the expiration of the Tender validity, the Tender
Inviting Authority may request the Tenderers to extend the Tender validity for further
period as deemed fit. The request and the responses thereto shall be made in writing. A
Tenderer may refuse the request without forfeiting its EMD. A Tenderer, agreeing to the
request will not be required or permitted to modify its Tender.
Joint Director Skill Development – Indore Zone
Page
a) The Tender should be typewritten and every correction and interlineations in the bid
should be attested with full signature by the tenderer, failing which the bid will be
treated as ineligible. Corrections done with correction fluid should also be duly attested.
b) All documents/papers should be numbered, signed and sealed by the Tenderer on each
page.
c) The Tender is required to be prepared and submitted in two parts viz. ‘Part A Technical Tender’ and ‘Part B - Price Tender’.
d) The ‘Envelope A- Technical Tender’ shall contain all essential documents for Technical
Tender. Such documents to include the following:(Online & Physical)
i.
Duly filled Checklist as per format given in Annexure – 7.
ii.
Duly filled and signed Form – “A” as per format.
iii.
Authorization Letters as per format given in Annexure – 1.
iv.
Performance Statement as per format given in Annexure – 2.
v.
Duly filled and signed Technical Tender Form as per format given in Annexure –
3.
vi.
Self-attested copy of relevant Licence for Manufacturing/Selling and distribution
(whichever appropriate) of the product quoted duly approved by the Licensing
authority for each schedule of product quoted as per specification in the tender.
vii.
Earnest Money Deposit
viii.
Self-attested copy of firm’s registration certificate
ix.
Self-attested copy of registration in sales tax department and its TIN number
along with certificate of sales tax clearance of last year.
x.
Self-attested copy of Sales tax Clearance Certificate of last three financial years.
4
2.5.Preparation and submission of Tender
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
xi.
Self-attested copy of Income Tax Clearance Certificate of last three financial
years.
xii.
Annual turnover statement of last three financial year backed by practicing
chartered accountant.
xiii.
Audited Balance sheet and Profit and Loss Statement of last three financial years.
xiv.
Self-attested copy of Item-wise ISO/ISI certificate.
e) The ‘Envelope C- Financial Bid’ shall contain duly filled, stamped and signed Price
Schedule in the format provided in Annexure – 4.
f) The Online Only tenders as above should be submitted on www.mpeproc.gov.inKey
date and time.
g) Late tenders shall not be accepted.
2.6.Tender Prices
a) Tender has been called for in the names of Items. The Tenderers should quote the rates
for the Items mentioned in Annexure – 8. The composition and Specification of each
item should be as per details given in Annexure – 8. Any variation, if found, will result
into the rejection of the tender.
b) The Tenderer should mention the name of manufacturer of the item being quoted.
c) Rates inclusive of Excise Duty, Customs duty, transportation, insurance, and any
incidental charges, but exclusive of State VAT/CST should be quoted for each of the
required item, and separately on door delivery basis (FOR Destination, at Stores) as per
format of Price Schedule given in Annexure – 4.
d) Quoted rates are valid up to one year from the date of signing of contract agreement
and shall be firm during the currency of the contract.
2.7.Deviation
If the Tenderer submits the offer with deviation for any item then Deviation statement
should be submitted for every offer. In the absence of this the purchaser reserves the right
to accept or reject the bid of that particular item. Bidder should submit Deviation statement
in following format. No other formats will be accepted. In absence of deviation statement
the tender will be rejected.
Specification of
SN Machine/Equipment mentioned
in Tender Enquiry
Specification of
Machine/Equipment offered
by the Tender
If yes, indicate the
deviation & whether
it on + ve side & how
Joint Director Skill Development – Indore Zone
Page
a) The Tenders shall be opened at the scheduled date, time and venue by the committee
constituted by the Tender Inviting Authority. The Tenderers’ representative may
attend the Tender opening.
b) During the tender opening as above, the envelopes containing Technical Tender shall be
opened first Online & Physical. The envelopes containing Price Tender shall be Opened
Online Only on Scheduled Date & Time.
c) The date and time of opening of Price Tenders shall be informed to all such Tenderers
5
2.8.Opening of Tenders
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
who qualify in technical evaluation. The tenderer’s representative may choose to attend
the opening of Price Tender.
d) In the event, the date of opening as above is declared government holiday; the tenders
shall be opened at the same time on the next working day.
2.9.Evaluation of Tenders
a) The purchase committee, constituted by the Tender Inviting Authority, shall evaluate
the tender with reference to technical requirements and various other commercial
criteria given in the Tender Document.
b) The rate per unitfor the tendered quantity, indicated in the Annexure – 4 shall be
considered for evaluation of Price and determining L-1 Tenderer.
c) No complaint shall be entertained by the Tender Inviting Authority after the opening of
financial bid.
2.10.
Award of Contract
a) The Tenderer who has quoted lowest unit rate for an item shall be considered for award
of contract.
b) The successful Tenderer shall execute an agreement (As per format given in Annexure –
6 ) on a Non-judicial stamp paper of value of Rs.100/- (stamp duty to be paid by the
tenderer) within 15 days from the date of the intimation from Tender Inviting Authority
informing that his tender has been accepted.
c) If the successful Tenderer fails to execute/sign the agreement within the specified time
or withdraw his/her tender after the intimation of acceptance of his/her tender or
owing to any other reasons, his purchase order shall be cancelled and the EMD
deposited by him with the tender shall stand forfeited by the Tender Inviting Authority
besides debarring the tenderer for a period of one year.
a) The Tender Inviting Authority shall place individual Purchase Orders for supply of
Items during the period of 1 year from the date of signing of contract with successful
Tenderer(s). Tender Inviting Authority reserves the right to extend the validity of
purchase order further by 3 months on the same rates and terms & conditions of the
contract.
b) The supplier should complete the supply at the respected Govt. Industrial Training
Institute(ITI) situated at various location of Indore Zone within 45 days from the date of
issue of purchase order.
c) If at any time the Tenderer has, in the opinion of the Tender inviting authority, delayed
the supply of Items due to one or more reasons related to force Majeure events such as
riots, mutinies, wars, fire, storm, tempest or other exceptional events, the time for
supplying the Items may be extended by the Tender inviting authority/ordering
authority at its discretion for such period as may be considered reasonable. However
such extension shall be considered only if a specific written request is made by the
Tenderer within 7 days from the occurrence of such event. The exceptional cause does
not include scarcity of raw material, power cut and labour disputes.
d) According to the M.P. Store Purchase Rules, 30% of total purchase will be made from
that Manufacturer/Authorized Dealer/Firm who has more than 50% partnership of the
persons belonging to SC/ST category. If the Manufacturer/Authorized Dealer/Firm who
has more than 50% partnership of the persons belonging to SC/ST category does not
Joint Director Skill Development – Indore Zone
6
Placement of Purchase Orders and Delivery Requirements
Page
2.11.
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
e)
f)
g)
h)
i)
2.12.
participate in the tender then purchaser will call the list of such
Manufacturer/Authorized Dealer/Firm from the District Industries Centre (DIC) and
may place the order up to the 30% value of tender to the eligible SC/ST firms on the
accepted lowest rates.
The undersigned reserves the rights for any changes/cancellation/rejection of any part
or whole tender, without assigning any reason what so ever.
Warrantee/Guarantee should be for a period of minimum 1 year.
All consignment must be dispatched freight paid to concern ITI “To pay” Railway
Receipt/Freight Receipts will not be accepted. Loading /Unloading charges shall be
borne by the supplier.
It must be noted that normally all correspondence and transactions will be made only
with the parties whose tenders have been accepted and not with anybody else.
The undersigned reserves the right to split up the order for supply of articles at tender
for amongst more than one tender.
Quality Testing Requirements:
a) The Items including its packing (packaging), to be supplied, shall be of the best quality &
ISI/ISO certified and shall comply with the specifications given in the Tender Document.
b) All Items should be supplied with quality certificate. The undersigned may get the items
inspected by such person or persons he deems fit and to reject such of these items as in
his opinion do not come up to the specification. The decision of the undersigned will be
final in such cases. The rejected items will be returned on the bidder’s cost.
c) If any of the Items supplied by the tenderer, found to be ‘Not of Standard Quality’ after
the delivery, the tenderer should supply the whole Item quantity again irrespective of
consumption of that particular. The balance stock, if any, should be taken back within 7
days by the supplier at his/her own cost otherwise the authority will destroy it and no
claim in this regard shall be entertained.
2.13.
Payment Terms
a) The 100% payment shall be released within 30 days from the date of receipt of
accepted Items and upon submission of claim for payment supported by Invoice (in
triplicate). However, if supplied Items are found ‘not of standard quality’, then whole
payment will be withheld and shall be released only after receipt of replacement of
Items which were found not of standard quality.
b) At the time of release of payment, any deduction towards delayed deliveries shall be
made from the claim amount.
2.14.
Penalty Conditions
Settlement of Disputes
Joint Director Skill Development – Indore Zone
Page
2.15.
7
a) In case the delivery period is extended with liquidated damages, the Ordering Authority
shall impose liquidated damages @0.5% per day of the delivered price of the delayed
items or part thereof until the actual delivery is made up to a maximum deduction of
10% of the contract price.
b) Once the maximum is reached the purchaser may consider termination of the order in
part or full. In such case, the performance security submitted by the Tenderer shall be
forfeited to the extent of 10% of the order value or part thereof.
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
Page
8
a) The purchaser and the supplier shall make every effort to resolve, amicably by direct
informal negotiation any disagreement or dispute arising between them under or in
connection with the contract.
b) Any Tenderer aggrieved by the decision of the Tender Inviting Authority may represent
to the Divisional Joint Director - Indore Zone within 15 days from the date of receipt of
order and Divisional Joint Director shall dispose the appeal expeditiously.
c) No Appeal shall be preferred while the tender is in process and until tender is finalized
and Notification of award is issued by the purchaser.
d) In the event of any dispute arising out of the tender or orders, the same shall be settled
in accordance with the Arbitration and Conciliation Act, 1996. The venue of arbitration
shall be the place of Tender Inviting Authority.
e) In the event of any dispute arising out of the tender or orders such dispute would be
subject to the jurisdiction of Courts of Madhya Pradesh nearest to the place of Tender
Inviting Authority.
f) In no event will the TIA be liable for any loss of profits, loss of savings, or incidental,
indirect , special or consequential damages ‘arising out of’ or ‘in relation to’ the present
tender.
g) Neither the TIA shall be liable for any claims, losses, costs, damages of any nature
whatsoever nor the tenderer shall claim expenses for any cause or causes, including any
legal liability arising ‘out of’ or ‘in relation to’ the present tender.
h) The tenderer shall be solely responsible for any deficiency in services and supplies
given by him including the quality and specification of medicines and the tenderer shall
be liable to make good the losses suffered by the TIA due to the fault on the part of the
tenderer.
i) The maximum liability of TIA shall be limited to the extent of payment of goods
delivered as per terms of this tender document. TIA shall not bear any other financial
liability such as interest on delays etc.
Joint Director Skill Development – Indore Zone
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
3. E-TENDERING PROCESS
3.1.Registration of Bidders on e-Procurement System
Manufacturers or their Authorized Dealers for Supply of Tools &Equipments for ITIs of Indore
Zone are required to register on the e-Procurement System on the website
https://www.mpeproc.gov.in in order to participate in tenders processed by Directorate of Skill
Development using E-Procurement system of IT department.
E-tendering Helpdesk at TCS, Bhopal Tel. No.18002588684
3.2.Digital Certificates
The Bids submitted online should be signed electronically with a Class III Digital Certificate to
establish the identity of the bidder submitting the bid online. The Bidders may obtain Class III
Digital Certificate issued by an approved Certifying Authority authorized by the Controller of
Certifying Authorities, Government of India. A Class III Digital Certificate is issued upon
receipt of mandatory identity proofs along with an Application Form. Only upon the receipt of
the required documents, a Digital Certificate can be issued. For details please visit
www.ccc.gov.in
Please note that it may take upto 7 working days for issuance of Class III Digital
Certificate, hence the bidders are advised to obtain them at the earliest.
The Bidders may obtain more information and the Application Forms required to be
submitted for the issuance of Digital Certificate from the e-Procurement, IT
Department, Arera Hills, and Bhopal.
E-tendering Helpdesk at TCS, Bhopal Tel. No.18002588684.
E-mail :- [email protected]
Important Note
Bid for a particular tender can be submitted during the ONLINE BID SUBMISSION stage only using the
Digital Certificate that is used to encrypt the data during the ONLINE BID PREPARATION.
Joint Director Skill Development – Indore Zone
Page
The digital certificate issued to the Authorized User of a Partnership firm / Private
Limited Company / Public Limited Company / Joint Venture and used for online bidding
will be considered as equivalent to a no-objection certificate / power of attorney of that
user.
In case of Partnership Firm, majority of the Partners have to authorize a specific
individual through Authority Letter signed by majority of the Partners of the firm.
In case of Private Limited Company, Public Limited Company, the Managing Director /
any other Person (having designated authority to authorize a spe cific individual) has to
authorize a specific individual through Authority Letter.
Unless the certificate is revoked, it will be assumed to represent adequate authority of
the specific individual to bid on behalf of the Organization for online tenders as per
Information Technology Act, 2000. This Authorized User will be required to obtain a
9
In case, during the process of a particular tender, the bidder looses his Digital Certificate because of any
problem (such as misplacement, virus attack, hardware problem, operating system problem, etc.); he
may not be able to submit his bid online. Hence, the bidders are advised to keep their Digital
Certificates in a safe place under proper security.
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
Digital Certificate. The Digital Signature executed through the use of Digital Certificate of this
Authorized User will be binding on the firm. It shall be the responsibility of
Management/Partners of the concerned firm to inform the Certifying Authority, if the
Authorized User changes, and apply for a fresh digital certificate for the new Authorized User.
3.3.Set Up of Bidders' Computer System
In order for a Bidder to operate on the e-Procurement System, the Computer System of the
Bidder is required to be set up for Operating System, Internet Connectivity, Utilities, Fonts,
etc. A help file on setting up of the Computer System can be obtained from e-Procurement Cell
(M/s. TCS Limited, 5th Floor Corporate Block, DB Mall, Bhopal).
3.4.Publishing of N.I.T.
For the Tenders processed using the e-Procurement System, only a brief Advertisement
related to the Tender shall be published in the newspapers and the Detailed Notice and terms
and conditions of tender shall be published only on the e-Procurement System. The bidders can
view the Detailed Notice, Terms & Conditions of tender document and the time schedule for all
the
Tenders
processed
using the
e-Procurement System on the website
https://www.mpeproc.gov.in
3.5.Key Dates and time
The Bidders are strictly advised to follow the time schedule (Key Dates and time) of the
tender for their side of tasks and responsibilities to participate in the tender, as all the
stages of each tender are locked before the start time and date and after the end time and
date for the relevant stage of the tender as set by the concerned Department Official.
3.6.Downloading of the Tender Documents
The tender documents can be downloaded online from the website https://www.mpeproc.gov.in. All
the Bidders are required to register on the e-Procurement System of IT Department of Madhya
Pradesh website https://www.mpeproc.gov.inin order to participate in tender.
3.7.Payment for registration on E-tendering portal
The registration fee Rs. 500/- + taxes applicable is to be paid ONLINE. And details of payment
are required to email on [email protected] , [email protected],
[email protected]
3.8.Payment of tender document fee
Although the tender document can be downloaded from the website http://www.mpeproc.gov.in,
the bidder has to pay a sum of INR 1000 (Rupees One Thousand only) towards tender document fee
by way of Online.
Joint Director Skill Development – Indore Zone
Page
The Bidders have to prepare their Bids online, encrypt their bid data in the b id forms and
submit documents required to be uploaded related to the tender as per the time schedule
mentioned in the key dates and time as given in the Notice Inviting Tender after signing of the
same by the Digital Signature of their authorized representative.
10
3.9.Preparation of Bids and Submission of Online Bids by the Bidders
e-Tender | Supply of Tools & Equipments for Govt. ITIs of Indore Zone e-Tender
3.10.
Submission of Earnest Money Deposit
The manufacturers or their Authorized Dealers shall submit their Earnest Money Deposit as usual in a
physically sealed Earnest Money Deposit envelope and the same should reach the concerned office
as stated in the Notice Inviting Tender and key dates.
Earnest Money should be submitted in the form of Demand Draft of Nationalized Bank/Scheduled
Bank in Favor of Joint Director, Skill Development, WITI Campus Nanda nagar, Indore MP.
The manufacturers or their Authorized Dealers has to upload scanned copy of Earnest
Money Deposit instrument along with the reference details in the relevant field during online
bidding.
3.11.
Opening of Tender
The concerned Department Official receiving the tender or his duly authorized person shall open
the online.
3.12.
For any further queries, bidders may kindly contact
For more details, please contact on working days within working hours (10:30 to 17:30)
Page
11
Tel. No. 0731-2556720, Mob. 9229569889
E-tendering Helpdesk at TCS, Bhopal Tel. No. 18002588684
E-mail:- [email protected]
Joint Director Skill Development – Indore Zone
FORMAT OF COVERING LETTER
Ref No: ……………………………………..
Date: …………………………….
To,
The Joint Director
Skill Development,
WITI Campus Nandanagar Indore
INDORE-452011
Sub: Submission of Supply of Tools & Equipment for ITIs of Indore Zone, Tender No. JDSD/IND/PUR/2015-16/01
Dear Sir,
As per terms & conditions of the tender following documents are submitted as under:
1. Form “A”
Enclosure No. …………………….
2. EMD
Package
No
Earnest Money
Deposit
01
INR 50000
02
INR 50000
03
INR 50000
04
INR 100000
DD No
Date
Issuing Bank
3. Other Testimonials …………………
We have quoted rates for items (Number of quoted item to be mentioned) in the Packages as stated
below:
Package
No
Total Item in
Tender Enquirey
No of Item Quoted
01
02
03
04
The entire item is quoted with brand name & full specification. The technical detail as desired is
submitted in prescribed format as per enclosed Annexure
Authorized Signatory
Name & Signature with Seal
Date
Page | 12
FORM – A
(To be signed and returned along with the tender)
Ref No: ……………………………………..
Date: …………………………….
To,
The Joint Director
Skill Development,
WITI Campus Nanda nagar Indore
INDORE-452011
Sub: Submission of Supply of Tools & Equipment for ITIs of Indore Zone, Tender No.
JDSD/IND/PUR/2015-16/01
Dear Sir,
I/We
Name of Authorized
Signatory
Name of Bidder
Address of Bidder
Phone
e-Mail
Have read the Tender rules for the supply of various goods as per Tender notice to the Industrial
Training Institutes in Indore Zone and I/We accept all rules for Tender.
Authorized Signatory
Name & Signature with Seal
Date
Page | 13
Annexure - 1
MANUFACTURERS' AUTHORIZATION FORM
Ref No: ……………………………………..
Date: …………………………….
To,
The Joint Director
Skill Development,
WITI Campus Nanda nagar Indore
INDORE-452011
Dear Sir,
We ---------------------- who are established and reputable manufacturers of (name and
description of goods offered) having factories at --------------------------------------------- (address of
factory) do hereby authorize M/s --------------------------------------(Name and address of Agent) to
submit a bid, and sign the contract with you for the goods manufactured by us against the Tender
Published by you.
No company or firm or individual other than M/s -------------------------------- are authorized to
bid, and conclude the contract for the above goods manufactured by us, against this specific Tender.
Yours faithfully
(Name)
(Name of manufacturers)
Note: This letter of authority should be on the letterhead of the manufacturer and should be
signed by a competent person. This AUTHORIZATION FORM should be notarized. It should be
attached in the bid.
Page | 14
Annexure – 2
PROFORMA FOR PERFORMANCE STATEMENT
(FOR THE PERIOD OF LAST THREE YEARS)
Tender SPN NO
JDSD/IND/PUR/2015-16/01
Date of Opening
12/01/2016
Name of Bidder
Name &
Address of
Purchaser
Order
No &
Date
Description
& Quantity of
order item
Order
Value
(in Rs)
1
2
3
4
Date of
Delivery
Reason of
delay in
delivery (if
any)
Attach
satisfaction
Certificate
issued by
Purchaser
5
6
7
Authorized Signatory
Name & Signature with Seal
Date
Page | 15
Annexure - 3
TECHNICAL TENDER FORM
(On the original letter head of the manufacturer, should be submit separately for each package)
Ref No: ……………………………………..
Date: …………………………….
To,
The Joint Director
Skill Development,
WITI Campus Nandanagar Indore
INDORE-452011
Sub: Submission of Supply of Tools & Equipment for ITIs of Indore Zone, Tender No. JDSD
IND/PUR/2015-16/01
Dear Sir,
We, the undersigned have examined the above mentioned Tender document. We now offer
to supply and deliver Item/Equipment in conformity with your above referred document and as per
table below:
SN
Package No
Item Code
Item Name & Description
Make
QTY
1
2
2. If our tender is accepted, we undertake to supply the Item/Equipment in accordance with
the delivery requirements given in the Tender document.
3. We agree to keep our tender valid for acceptance as required in the Tender Document, or for
subsequently extended period, if any, agreed to by us. We also accordingly confirm to abide
by this tender up to the aforesaid period and this tender may be accepted any time before
the expiry of the aforesaid period. We further confirm that, until a formal contract is
executed, this tender read with your written acceptance thereof within the aforesaid period
shall constitute a binding contract between us.
4. We further understand that you are not bound to accept the lowest or any tender you may
receive against your above referred tender enquiry.
5. We confirm that we do not stand deregistered/banned/blacklisted/debarred by any Govt.
Authorities.
6. We confirm that we fully agree to the terms and conditions specified in above mentioned
Tender Document, including amendment/ corrigendum if any.
Authorized Signatory
Name & Signature with Seal
Date
Page | 16
Annexure – 4
PRICE SCHEDULE
(To be filled in prescribed Excel format only & same to be uploaded for Price Bid,
should submit Separate Sheet for each Package)
Tender SPN NO
JD-IND/PUR/2015-16/01
Date of Opening
12/01/2016
Name of Bidder
SN
Item
Code
Item
Name
Specification
Make
Rate/Unit
Sales
Tax
VAT
Total
Price/Unit
A
B
C
(A+B+C)
1
2
3
n…
Authorized Signatory
Name & Signature with Seal
Date
Page | 17
Annexure - 5
GUARANTEE CERTIFICATE
(On the original letter head of the manufacturer)
Ref No: ……………………………………..
Date: …………………………….
To,
The Joint Director
Skill Development,
WITI Campus Nandanagar Indore
INDORE-452011
Sub: Submission of Supply of Tools & Equipment for ITIs of Indore Zone, Tender No.
JDSD/IND/PUR/2015-16/01
Ref: Your S.O.NO. ……………… Dated: …………….placed on our Authorized Dealer
M/s ……………………………………………………………………………………………………………………………………….
Dear Sir,
With reference to the above, this is to certify that the following item has been supplied by
our Authorized Dealer M/s …………………………………………………………………………
SN
Item Name & Description
QTY
1
2
We further certify that the material supplied as above has been duly pre inspected by us and have
been found to be in conformity with specification as per the terms & conditions of the supply order.
They are hereby guaranteed for a period of 12 months from the date of receipt at respective ITI;
against any material defects, manufacturing defects (Including assembly installation, commissioning
as applicable) and bad workmanship.
In case of any defect, we guarantee to replace the same immediately without at any cost.
Seal & Signature of Dealer
Seal & Signature of Manufacturer
CC: Principal, Govt. ITI ……………………………………………..
Page | 18
Annexure - 6
FORMAT FOR CONTRACT AGREEMENT
(On the Non-Judicial Stamp)
THIS AGREEMENT made the........... Day of ........................., 20___between___________________
_____________________________ (hereinafter "the Purchaser") of the one part and M/s ______
______________________________ (hereinafter called "the Supplier") of the other part:
WHEREAS the Purchaser is desirous that certain Goods and ancillary services viz. Supply of Tools
&Equipments in the tender reference JDSD/IND/PUR/2015-16/01, Indore Dated 28-12-2015
and has accepted a bid by the Supplier for the supply of those goods and services for the sum of Rs.
________ /- (Rupees __________________________________ only) (hereinafter called "the Contract Price").
NOW THIS AGREEMENT WITNESSETH AS FOLLOWS:
1. In this Agreement words and expressions shall have the same meanings as are respectively
assigned to them in the Conditions of Contract referred to, and they shall be deemed to form and
be read and construed as part of this agreement.
2. The following documents shall be deemed to form and be read and construed as part of this
Agreement, viz.:
a) The Letter of Acceptance issued by the purchaser.
b) The Notice Inviting Tender
c) The supplier’s bid including enclosures, annexures, etc.
d) The Terms and Conditions of the Contract
e) The Schedule of Requirement
f) The Technical Specification
g) Any other document listed in the supplier’s bid and replies to queries, clarifications issued
by the purchaser, such confirmations given by the bidder which are acceptable to the
purchaser and the entire Addendum issued as forming part of the contract.
3. In consideration of the payments to be made by the Purchaser to the Supplier as hereinafter
mentioned, the Supplier hereby covenants with the Purchaser to provide, the goods and services
and to remedy defects therein in conformity in all respects with the provisions of the Contract.
4. The purchaser hereby covenants to pay the Supplier in consideration of the provision of the
goods and services and the remedying of defects therein, the Contract Price or such other sum as
may become payable under the provisions of the Contract at the times and in the manner
prescribed by the Contract.
Page | 19
Brief particulars of the goods and services which shall be supplied / provided by the Supplier are as
under.
SN
Description of Item
Make
Unit
Price
(Rs.)
QTY
Sales tax
in %
VAT
Total
value
inclusive
of sales
tax And
Vat
DELIVERY SCHEDULE:
Supply shall complete within 30 days from the date of purchase.
IN WITNESS where of the parties here to have caused this Agreement to be executed in accordance
with their respective laws the day and year first above written.
Signed, Sealed and Delivered by the
Said _____________________________________________ (For the Purchaser)
In the presence of ..........................................
Signature
Name
Address
Witness 1.
2.
Signed, Sealed and Delivered by the
Said _____________________________________________ (For the Supplier)
in the presence of ..........................................
Signature
Name
Address
Witness
1.
2.
Page | 20
Annexure - 7
CHECK LIST
Envelope – A
SN
Documents
1.
Checklist
2.
EMD in form Demand Draft of Nationalized Bank/Scheduled Bank in
Favour of “Joint Director, Skill Development, Indore”
3.
Covering Letter duly signed & stamped on letter head
4.
Form – A duly signed & stamped on letter head
5.
Self-attested copy firm registration Certificate
6.
Self-attested copy of registration in sales tax department
7.
Authorization Certificate in case of Authorized Deal of a Manufacturer
8.
Sales tax clearance certificate of last three FY
9.
Income Tax clearance certificate of last three FY
Submitted
Y/N
Page
No
Declaration for not having been debarred/blacklisted either by the
10. Tender Inviting Authority or by any State Government or by Government
of India on INR 100 Judicial Stamp
11. Copies of balance sheet & profit-loss account for last three FY
12. Turnover Certificate of Minimum Rs. Ten Lakh issued by practicing CA
13. Item Wise CE/ISO/ISI/GMP certificate
14. Technical Tender Form as per Annexure-II
Authorized Signatory
Name & Signature with Seal
Date
Page | 21
Annexure - 8
List of Items (Package – 01 Computer)
INDORE ZONE
S
N
Item_Code
Item_Name
Specifications
Indicative
QTY
1
ITE041
anti static pads
typical resistance is on the
order of 100 k ohm to 100m
ohms between points on the
mat and to ground.size-30×30
cm × 0.5cm electrically earthed
8
2
ITE042
anti static wrist wraps
safe dual wire design
constructed of stainless steel.
comes in 6′ and 12′ coil lengths
with a built-in 1meg resistor.
1/8″ snap to mono jack
connector for use with constant
monitors.
8
3
OFC006, COP017,
SHD005, ITE066
antivirus package
like npav,quick heal (total
security)
148
4
SHD004
application software
(m.s.office education
version)
m.s.office 2010 or higher
2
5
COP009
barcode scanner
map bar code data to any key
on the keyboard,infra-red led
light and beeper to confirm
successful bar code
reading,dual scanning mode
wireless scanner and storage
mode, fast scan speed 200/sec,
more than 10000 records
storage, shock proof and dust
proof, long lasting lithium
battery
19
6
COP013
bluetooth headphone &
mic set
128
design: closed back, powerful
sound reproduction and
impeccable bass response,
eliminates background
noise,frequency response: 21 to
20,000 hz, impedance: 24 ohms
7
ITE045
blu-ray drive and player
operating system supportedwindows 7/vista/xp,
supported discs-cd/dvd,typedvd writer,interface-usb
4
8
ITE031
cabinets
drive bays: 2 x 5.25-inch and 5
x 3.5-inch
8
Page | 22
expansion slots: 4
included fans: 1 x 120mm
optional fans: 1 x 80/90mm for
rear and 1 x 90mm side
vga card clearance: 9.8-inch
with hdd cage and 14.3-inch
with hdd cage
i/o panel: 1 x usb 3.0, 2 x usb
2.0 and audio jacks
9
ITE049
card reader
fully compliant with the hispeed usb 2.0 specification,led
indicates card insertion and
data traffic,usb powered (no
external power or battery
needed),compatible with the
following cards without the
need for an adapter-sd (secure
digital), sdhc (secure digital
high capacity), sdxc (secure
digital extended capacity), mmc
(multimediacard), mmcplus,
mmcmobile, rs-mmc,
microsdhc, microsd/transflash
and memory stick micro
(m2),with the need for an
adapter-minisd, minisdhc and
mmcmicro
4
10 ITE084
connectors for cables
4
11 ITE028, COP006
crimping tools
12 ITE067
data recovery software
13 ITE053
different types of memory
cards
8gb,16 gb,32gb with read &
write speeds of up to 80 mb/s
& 20 mb/s respectively, apps
and videos load quicker and
files transfer faster.
24
14 COP010, ITE044
digital multimeters
functions dcv acv dca resistor
(ohms) diode buzzer transistor
(hfe) temperature square wave
output battery test 2. display
4.75 cm length, 15mm high lcd.
3. operating instructions when
testing dc voltage, ac voltage,
dc current, resistance, diode,
buzzer and battery, connect the
red test lead to "v 0 ma" jack
and black test lead to "com"
jack
124
modular dual crimping tool ht568r ratchet 8p, 6p for rj45,
rj11, rj12
28
2
Page | 23
15 COP004, ITE046,
ITE052
digital web cam
full hd 1080p with skype video
calls ,h.264 avc compression,
full hd 1080p recording ,hd
720p video call quality,carl
zeiss optics
72
16 COP005, ITE038
dvd or blu-ray writer
operating system supportedwindows 7/vista/xp,
supported discs-cd/dvd,typedvd writer,interface-usb
32
17 OFC001
epabx
powerful zx platform.
built in cli.
global memory 450 personal
(45 each)
accepted / denied table
remote maintenance
flexible numbering
call forwarding
auto call back
call camp
conference
virtual extensions
alternate no. redial
transferable caller id
class of service isd/std/local
hot line dialing
barge-in
monitor
do not disturb
tone demo
disa
call hold
call pick-up
call parking
follow me
walk in class of service
reminder beeps stage wise
executive ringing
dynamic lock
boss secretary
call toggle
call disconnec
1
18 COP014, ITE033,
ITE037,
external solid state hard
disk
memory storage capacity-1
tb,hard drive size-1
tb,hardware platform-pc,
mac,included components-plus
drive, seagate dashboard preloaded on drive, ntfs driver for
mac pre-loaded on drive, 18inch usb 3.0 cable, quick start
guide,network interface
description-usb
48
Page | 24
19 ITE090
flux meter
input power supply:
230vac±10%
sensor should be capable to
measure flux up to 2000guass
with digital display and over
range indication
12
20 ITE050
game video card
graphics engine nvidia geforce
gtx 750 ti
4
gpu clock base clock: 1033
mhz, boost clock: 1111 mhz
processors and cores 640 cuda
cores
bus standard pci express 3.0
x16 (compatible with 1.1)
21 COP025
hand held vacuum cleaner
10
power consumption:
230v,motor output:
800w,vacuum speed: 14l per
second,blower feature,weight:
1.8kg approx.,shoulder strap
for easy carrying,bag-less
design,cord length:
18ftincludes flexible hose,
multipurpose brush, upholstery
brush, floor and carpet brush,
blower adapter and more,
22 ITE047
hd display
screen size and type17-inch
(viewable),maximum
resolution-1280 by 1024
pixels,viewing angle-170°
vertical170° horizontal;color
support-16.7 million
colors;input/output portsapple display connector;
two-port, self-powered usb
hub,agency approvals-energy
star, tco 95
4
23 OFC007
internet security
npav& quick heal-web security
,e-mail security,vulnerability
scanner,dada theft protection,
improved scan
engine,advanced dnascan
1
24 ITE039
keyboards
102/105 key keyboard ,
electrical data
input power 5 volts d.c. at 500
ma
rollover n key
data output 8 bit parallel,
8
Page | 25
positive logic
strobe output 10 microseconds,
negative logic
auto repeat delay 650
milliseconds + - 25%
auto repeat rate 28.2 hertz + 255o
interface signal levels standard
power ttl
25 ITE081
lan protocol simulation
and analyser software
bus, star and ring topologies
4
socket programming and
processing
data encryption and decryption
ethernet and wireless lan
protocols
- stop and wait
- go back to n
- selective repeat
- token bus
- token ring
- csma/ca
- csma/cd
user selectable packet size from
128 bytes ~ 16384 bytes
user selectable inter packet
delay from 1000ms ~ 5000ms
manual and auto error
generation
real time graphical
representation of entire
transmission and reception
auto detection of ip addresses
and names of each node in the
transmission
measurement of packet
transmission time
measure of throughput
effect of bit errors on various
protocols
built-in protocol analyzer
built-in network analysis
facility to plot graphs
real time software can work on
existing lan
library files provided for
project purpose
built in help
26 ITE054
laptop spares: cabinet with
display, memory, hard
disk, battery pack,
keyboard membrane,
chargers
2gb ram 1 gb grafix vidio card
with i3 processor 500 gb hard
disk
4
Page | 26
27 ITE026
lcd/dlp projector
sku it.it.pr.310291 type of
product
hdmi projector
model no
cp-rx250
projection system
dlp
native resolution
1024 x 768
brightness
2700
contrast ratio
2000 : 1
aspect ratio
4:3 (xga)
lamp type
4000 hours
lamp(normal/economic
mode/smarteco mode
5000 hours
weight
3 kg
power supply
215 watt
power consumption
100v - 240v
12
28 ITE063,COP020
linux operating system
latest version5.10,architectures-x86, x86_64,
ia64*,kernel versions available2.6.39 unbreakable enterprise
kernel release 2**
2.6.32 unbreakable enterprise
kernel release 1***
2.6.18 (red hat compatible
kernel)
2.6.18 (red hat compatible
kernel with bug fixes,minimum
memory requirements-512 mb
(x86)
1 gb (x86_64),minimum disk
space-1 gb
92
29 ITE078
managed layer 2 ethernet
switch 8/16/24 port
port type:10/100,connectivity:wired,data transfer rate-:12.75
gbps,switching bandwidth:12.8 gbps,9.5 mpps
4
30 ITE079
managed layer 3 ethernet
switch 8/16/24 port
port type: 10/100
connectivity: wired
data transfer rate: 12.75 gbps
switching bandwidth: 12.8
gbps,9.5 mpps
4
Page | 27
31 ITE086
media convertor
auto-negotiation (802.3u)-the
4
media converter supports auto
negotiation. the 1000base-x
fiber interface negotiates
according to 802.3 clause 37.
the 10/100/1000base-t
negotiates according to 802.3
clause 28 and 40. the
1000base-x will link up with its
partner after the highest
common denominator (hcd) is
reached and the copper has
linked up with its partner. the
1000base-x will continue to
cycle through negotiation
transmitting a remote fault of
offline (provided this is enabled
through the switch setting)
until the copper is linked up
and the hcds match.
the media converter supports
auto-negotiation of full duplex,
half duplex, remote fault, full
duplex pause, asymmetric
pause and auto mdi-x.,automdix-auto-mdix (automatic
medium-dependant interface
crossover) detects the signaling
on the copper ethernet
interface to determine the type
of cable connected (straightthrough or crossover) and
automatically configures the
connection when enabled. the
media converter can also
correct for wires swapped
within a pair.
the media converter will adjust
for up to 120ns of delay skew
between the 1000base-t pairs.
32 ITE073
modem
data modes-itu-t v.92/v.90 data 2
rates (56 to 28 kbps)
itu-t v.34 (28.8 to 2.4 kbps with
200 bps auxiliary channel)
itu-t v.32bis, v.32, and fallbacks
itu-t v.22bis, v.22, v.23 (mintel),
bell 212a and 103
itu-t v.8, v.8bis
standard at command set
sync, async, and hdlc framing
itu-t v.42 lapm and mnp 1-4
error correction
Page | 28
itu-t v.44/v.42bis and mnp
class 5 compression
itu-t v.80 synchronous access
mode supports h.324
conferencing
itu-t v.25ter/v.250 for pc99/pc
2001 compliance
itu-t v.251 for h.324
conferencing and pc99/pc
2001 compliance featuresac'97 2.2 compliant
pc99 and pc2001 compliant
unimodem/v compliant
primary or secondary codec
global phone line interface
compliant with fcc, ctr21, jate,
and other ptts
84 db dynamic range tx/rx
paths
3.3-v or 5-v power supply
greater than 3000 v isolation
33 ITE030
motherboards (of different
make)
product name:intel core i7/ i5/
i3/ microatx
manufacturer part
number:h81m-a/c/s
audio channels:7.1
total number of usb ports:6
number of usb 3.0 ports:2
vga:yes
hdmi:yes
dvi:yes
number of total expansion
slots:3
total number of pci express
slots:3
number of pci express x1
slots:2
number of pci express x16
slots:1
number of memory slots:2
memory form factor:dimm
maximum memory:16 gb
memory standard:ddr31600/pc3-12800 ddr31333/pc3-10600 ddr31066/pc3-8500
memory technology:ddr3
sdram-1gb
8
34 ITE040
mouse
os compatibility os x, windows
wired connection usb
programmable buttons 3
tracking type optical
sensor dpi 800
8
Page | 29
35 ITE065,COP016,OF
C003
ms office
windows 10 common features
process management
interrupts
memory management
file system
device drivers
networking
security
i/o
150
36 TUR119
multimedia based
simulator for cnc
technology
and interactive cnc part
programming software for
turning & milling with
virtual machine operation
and simulation using
popular operation control
system such as fanuc,
siemens, etc.
(web-based or licensed
based) (10 trainees + 1
faculty)
support for 2 and 3 axis
cncmachines: lathes and
milling machines
Ÿ supports popular cncsystems
and control panels
Ÿ machine simulation in 3d
graphics
Ÿ real-time dynamic rotation,
zooming and panning of
machine views
Ÿ g-codes and m-codes
validation with g-code debugging
tool
Ÿ simulate canned cycles,
macros
Ÿ simulates post-processed files
from capsmill, capsturn or any
cam software,turret can be
configured for 4, 8, 12 tools
Ÿ atccan be configured for
horizontal / vertical orientation
Ÿ on-screen measurement for
tool offsets setting
Ÿ on-screen measurement of
machined dimensions
35
37 ITE082
network and internet
security trainer
complex lan & wan systems.
meeting the comptia “a+
certification and network
technology practices” as well as
“network+” and “security +”
requirements.
4
38 ITE083
network cables – coaxial,
flat, ribbon
39 ITE048
network storage
10
ports
1 x 10/100/1000 mbps rj45
ethernet; 1 x usb 2.0
raid support
raid 0, 1; jbod also available
cameras supported
up to 4
network file protocols
cifs/smb/rally (microsoft), nfs
4
Page | 30
(linux/unix), afp bonjour
(apple), ftp, sftp, tftp, http,
https, webdav, windows dfs,
snmp
supported users
up to 25
40 ITE080
network training system
standard components and
peripherals for a network and
provides all necessary modules
and parts for building thin net
system (thin coax) and twisted
pair network (10/100-base t).
4
41 ITE034
optical drives
cd-rom ,
4
dvd-r ,dvd-rom ,cd-rw ,cd-r
,dvd-ram ,dvd-rw ,dvd+r and
dvd+rw. interface:600 mbps for
sata,buffer size:1 or 2 or 4
mb.read & write speeds: dvd at
16x
42 ITE036
pen drives
capacity-32gb,interface-1.1 and
2.0,transfer speed-read 10
mb/sec, write 4 mb/sec,
4
43 ITE093
poe adapters
output voltage -15vdc @
0.8a,lan activity indicator no no
no gigabit lan port no no yes
remote reset capability no yes
yes reset button no yes yes
input voltage 90-260vac @ 4763 hz
4
44 ITE087
port utp jack panel
8/16/24
fully populated with cat6 jacks.
16-gauge metal frame.
flash gold contacts.
24
45 ITE058
post error debugging card
both isa bus and pci bus are
suitable
determine defects by difference
sounds coding with build-in
speaker.
it can diagnosis the
motherboard signal which
show the problem of cpu,
memory, video card, etc.
the post code display is made
up of a dual, dot matrix
hexadecimal read-out that
display's power on self test
(post) status codes
support the power source
working indicator -+5v,+12v,+3.3v and 12v(when
indicator led is on to indicate
8
Page | 31
its respective power is fine,
otherwise to indicate its
respective power is failure.)
fully compatible with any kind
motherboards which has the
pci and isa bus slot.
self checking remote display
function
46 ITE057
power electronics trainer
kit
the board consists of following
built-in parts: 01. scr and triac
for the speed control of the
universal motor. 02. two
potentiometers. 03. two
capacitors to control firing
angle of thyristors. 04. diac and
two nos. of diodes. 05. a
universal motor of 1/12 h.p. or
less capacity. 06. snubber
circuit in parallel with the triac,
which helps in improving the
dv/dt of the device and also
helps in reducing the rfi. 07.
adequate no. of other electronic
components. 08. mains on/off
switch, fuse and jewel light. *
the unit is operative on 230v
±10% at 50hz a.c. mains. *
adequate no. of patch cords
stackable 4 mm spring loaded
plug length ½ metre.
8
47 ITE027
power meter
digital panel meters
voltmeter(psf-vm7) other
features : .features: o accuracy
class: 1.0 or 0.5 o true root
mean square (rms)
measurement o ultra bright,
industrial grade, four digit
seven segment led display o
auxiliary power supply: 230
volts(± 20 volts) .specifications:
o auxiliary power supply: 230
volts(± 20 volts) o burden on
aux.: <3va o measuring rage: 0 500 volts o bezel size: 96 x 96
mm o panel cutout: 92 x 92 mm
o depth (behind bezel): 48mm
o
12
48 ITE032
processors (of different
make)
amd athlon xp
amd athlon x2, x3 and x4 series
amd athlon ii
amd phenom
amd sempron le
intel core 2 duo
8
Page | 32
intel core 2 quad
49 ITE089
rj-45 connector
application: pcb;networking
cable ,telehone cablebrand
name: cambo/oem/odmtype:
rj45;rj45 crystal plug
8p8c/6p4c/4p4cgender: male:
cat 6 rj45 plug
4
50 ITE088
sc couplers
sc/sc multimode fibre
couplerceramic sleeve
compatible with belkin fibre
patch panel sc adapter plate
(f4p511)
extends length of fibre patch
cables
female to female feed-through
rohs compliant
24
51 ITE072
scanner
type:full-color scanner,image
sensor type:-ccd image
sensor,original sizes that can be
scanned:-length
10–297 mm (0.4–11 inches)
width
10–432 mm (0.4–17
inches),basic scanning
resolution:-200 dpi
2
52 ITE043
smps
input voltage-230v ac,voltage
range-90v-270v ac,output-12v
dc,output power60w,efficiency-86%,coolingair,short circuit protectionyes,overload protection-yes
20
53 ITE059
smps tester
voltage tester for pc-power
supply, preventing your
computer from damage.
voltage source: 20/24 pin (atx
connector)
green indicator light=power is
ok
voltage test: +12v, -12v, +5v, 5v, +3.3v, 5v stand by (sb) 12v,
power good (pg)
easy to use. the operation
instruction on the face of tester.
connectors: floppy, hdd, cdrom,
sata, 4pin (p4), 8pin (dual-cpu),
6pin (pci-express)
device type: pc power supply
tester.
interface type: floppy, hdd,
cdrom, sata, 4pin (p4), 8pin
(dual-cpu), 6pin (pci-express).
8
Page | 33
voltage source: 20/24pin (atxconnector)
voltage test: +3.3v, +5v, +vsb, 5v, -12v and +12v.
54 ITE055
smps trainer kit
technical specifications input :
4
80 to 230 vac ±10%, 50 / 60 hz
outputs : +12 v dc regulated : 12 v dc regulated : +5 v dc
regulated switching
transformer input : 320 v dc
switching at 132 khz output :
30 vac (approx) fuse : 500 ma
(slow blow, spare fuse is given
with mains socket)
experiments that can be
performed study of switching
transformer study of pwm
switching device study of
optocoupler study of regulation
study of smps with variac input
study of various faults and their
removal in smps circuit.
55 COP007
standalone hard disks
memory storage capacity-1
tb,hard drive size-1
tb,hardware platform-pc,
mac,included components-plus
drive, seagate dashboard preloaded on drive, ntfs driver for
mac pre-loaded on drive, 18inch usb 3.0 cable, quick start
guide,network interface
description-usb
57
56 COP011
standard screw driver set
blade finish : chrome-plated
shank, durable black phosphate
tip
contains : 3/16 in x 6.000 in
cabinet, 1/4 in x 4.000 in
keystone, 1/4 in x 6.000 in
cabinet, 5/16 in x 6.000 in
keystone and #2 x 4.000 in
phillips
handle type : soft, cushioned
grip
number of pieces : 5
standard : asme/ansi
166
57 ITE052
surround sound speakers
75 watts rms
satellites: 48 watts rms (2 x 8 w
front, 16 w center, 2 x 8 w rear)
subwoofer: 27 watts rms
total peak power: 150 watts
frequency response: 45 hz–20
4
Page | 34
khz
58 ITE092
switch with poe ports
4
59 COP022
tally erp 9 or latest
erp -9 silvar(single user )
207
60 OFC004
typing tutor
typing tutor ( v. 6 ) -category
computer based training
subcategory cbt - typing
1
61 ITE056
ups trainer kit
technical specifications input :
190 to 260 v 10%, 50 hz output
: 230 v transformer
specifications input : 12 - 0 - 12
v outputs : 0, 190, 220, 240,
260 v 18 - 0 for battery
charging experiments than can
be performed study of pwm
technology to understand the
overall functioning of ups
trainer study of avr
transformer section of ups to
study the ups circuit in load
condition to identify different
faults and to study the
systematic procedure of their
troubleshooting in ups circuit.
add to cart
enquire now
tell a friend
add to wish list
call now to order
call now to order
support team
support team
oem & tenders
oem & tenders
dealership
dealership
educational equipments
4
physics lab equipments
biology lab equipments
chemistry lab equipments
lab microscopes and slides
laboratory glassware
science lab plasticware
mathematics lab kit
maths lab instruments
geography lab models
high school science kits
teaching equipments
educational charts
whiteboard & boards
technical school lab
electronics lab trainer kits
Page | 35
electronics lab trainers
ac dc motors machines
technical training kits
microwave test benches
antenna and satellite trainers
radar trainers
electrical wiring trainers
cnc trainers
electronic training boards
electronics training tools
analog electronics trainers
bread board trainers
communication lab trainer
consumer electronics trainers
digital electronics lab trainers
electronics lab trainer kits
fiber optics trainer
microprocessor lab trainers
instrumentation trainers
power electronics lab trainers
vlsi embedded trainers
variac electrical labs
soldering-desoldering stations
electric motors
electrical training equipment
engineering teaching
equipments
engineering lab equipments
technical training systems
integrated circuits trainers for
engineering school
fluid mechanics lab equipments
air compressor test rigs
mechanical lab equipments
heat transfer training systems
automobile engineering models
study thermodynamics
study control measurement
systems
thermodynamics lab
heat transfer bench
construction machines training
applied mechanics experiments
fluid mechanics lab equipments
engineering teaching
equipments
hydraulic bench and
accessories
flow channel and accessories
testing lab equipments
aggregate testing machines
Page | 36
bitumen testing instruments
concrete testing machines
cement testing equipments
ndt metal testers
rock testing machines
ndt testers - concrete
oil, petroleum & paint testing
safety & security equipments
soil testing equipments
metal test equipments
brinell hardness testing
tensile testing machines
universal testing machine
test lab equipments
testing lab equipments
gas chromatography
surveying instruments
workshop training equipments
school and lab furniture
educational furniture
scientific lab instruments
laboratory heating instruments
analytical lab instruments
measuring lab instruments
lab refrigerator & freezer
platinum lab equipments
laboratory equipments
laboratory balances
entomological equipments
insect showcase and cabinet
physics lab chemistry lab
biology lab lab glassware
electronics lab lab microscopes
science kit training kits hospital
& medical lab chemicals
naugra export 2015 ©
copyright, naugra medical
62 COP012
usb mini dongle for
bluetooth devices
connection
transforms any computer with
a usb port to a bluetooth
enabled computer – built with
the latest bluetooth
specification v4.0 class 2 –
supports all common bluetooth
(wireless) peripherals –
keyboards, mice, headsets,
stereo headphones, etc –
backwards compatible with
bluetooth versions 2.1/2.0/3.0
116
Page | 37
– compatible with windows 10
/ 8.1 / 8 / windows 7 / vista /
xp. not compatible with mac os
– consumes very low power
from the host pc
63 COP024
web server : any http web
server / xampp or any
other similar server
intel(r) xeon(r) cpu e5-2630
v3, 32-core server processor
128gb ddr4 ram
7.2tb (4 raid 1 arrays - each
array has 1.8tb of disk space)
100mbps uplink, shared over
the container
we provide a megabit uplink
with a guaranteed 20 mbit
connection and traffic shape
each container to 20 mbit
60
64 COP001, ITE025,
ITE078
wi–fi router
operating system-windows 8
(32bit/64bit), windows 7
(32bit/64bit), windows vista
(32bit/64bit), windows xp
(32bit/64bit), mac os x 10.4,
mac os x 10.5, mac os x 10.6,
mac os x 10.7, linux, utilitiesdevice discovery, firmware
restore, setup utility,frequency2.4 ghz,network standard-ieee
802.11b, ieee 802.11g, ieee
802.11n, ieee 802.3, ieee
802.3u, ieee 802.11i, ieee
802.11e, ipv4,wan-rj45,number of antenna1,number of lan ports-4,lan-rj45,number of wan ports1,antenna-external,
20
65 ITE062, OFC
windows operating system
windows 10 operating system
5
66 ITE075
wireless network adapter
pc card network adapter for
notebook computers. built-in
wi-fi antenna to provide
wireless capability. built-in led
lights that display the device
status.length-200 mm
8
67 COP021
wysiwyg web authoring
tool- dreamweaver or
opensource tools
likekompozer, frontpageor
similar tools along with ftp
tools for ex.filezillaetc.
microsoft expression web 4.0
http://msdn.microsoft.com/en
-us/expression/cc197140.aspx
,kompozer-built-in css editor
and html validator
59
Page | 38
List of Items (Package – 02 Electrical)
INDORE ZONE
SN
Item
Code
Item_Name
Specifications
Indicative
QTY
1
ECS065
am/fm commercial
radio receivers
am/fm commercial radio receivers with
sw,mw and fm band
8
2
ECS047
analog component
trainer
to study characteristics of various following
devices:
(a) various types of diodes.
(b) various types of transistors.
(c) fet
(d) mosfet
(e) ujt
(f) diac
(g) triac
(h) scr
10
3
ECS044
analog multimeter
analogue multimeter with mirror scale
inbuilt buzzer and led
0w adjustment with x 100 range
transistor test, hfe with diode
dc voltage: 0.1mv ~ 1000v
ac voltage: 10v ~ 1000v
dc current: 50μa ~ 10a
iceo: 150μa – 15ma – 150ma
hfe: 0 ~ 1000 with connector
diode test, transistor testing, function
protection, continuity buzzer
10
4
ECS067
application kits for
microcontrollers 6
different applications
for microcontrollers 6 different applications
• 8 bit adc using adc-0804 with a/d
conversion time 100 micro sec
• 8 bit accuracy dac chip using dac-0800
with settling time is 100 ns.
• adc & dac outputs are to be provided on
screw terminals.
• 4 digit seven segment display using
decoder technique.
• 12 no’s of led’s for ewsn.
• 4 way dip switch & 4 keys are provided for
input key’s application
• one 5v spdt relays are provided for control
application & the output are provided on
screw terminal.
• stepper motor control a two/four phase
motor
• half step, full step can be controlled using
this card.
• clock wise & anti clock wise rotations can
be controlled
4
Page | 39
• speed can be controlled by this controller
• facility to control maximum 2kg cm motor
is provided.
• 0.25kg cm stepper motor is supplied along
with this module.
• 600 tie point bread board for project
application.
• connect to 8255 using 26 pin frc
connector.
• user's manual with sample programs.
5
ELE116
bath impregnating
bath impregnating ,for impregnating
rewinding electrically opreted 230 v 50hz
24
6
ECS043
battery charger
0-12v dc outputv 1amp current rating, led
indicator for charging or not.
3
7
ECS079
cell phone power
source with charger
chords for different
cell phones
power bank with 5000 mah capacity
5
8
ECS041
cro dual trace 20 mhz
horizontal system
sweep time: 0.2usec~0.5sec/div,20steps in
1-2-5 sequence; sweep time accuracy:±3%
vernier sweep time control:≤1/2.5 of panelindicated &#118alue;
5
sweep magnification: 10 times;
×10mag sweep time accuracy: ±5%
(20nsec~50nsec are uncalibrated);
linearity:±5%,×10mag: ±10% (0.2s~1us)
position shift caused by ×10mag: within
2div. at crt screen center
x-y mode:
frequency bandwidth: dc to at least 500khz;
x-y phase difference:≤3°at dc~50khz
sensitivity: same as vertical axis. (x-axis:ch1
input signal; y-axis:ch2 input signal.);
calibration voltage
waveform: positive-going square wave;
frequency: approx. 1khz;
duty ratio: within 48:52;
output voltage: 2vp-p±2%;
output impedance: approx.1kω
calibration signal
waveform: positive-going square wave;
frequency: approx. 1khz;
duty ratio: within 48:52;
output voltage: 2vp-p±2%;
output impedance: approx.1kω
crt
type: 6-inch rectangular type, internal
graticule;
phosphor:p31;
acceleration voltage:
Page | 40
approx.2kv(20mhz)/approx.12kv(40mhz);
effective screen
size:8×10div[1div=10mm(0.39in)];
graticule: internal;
trace rotation: provided
vertical axis
sensitivity:5mv~5v/div,10 steps in 1-25sequence
sensitivity accuracy:≤3%
vernier vertical sensitivity: continuously
variable to 1/2.5 or less of panel-indicated
&#118alue frequency
bandwidth:
dc~20mhz(x5mag:dc~7mhz)/dc~40mhz(x
5mag:dc~15mhz)dc~50mhz(x5mag:dc~15
mhz)
ac coupling: low limit frequency 10hz. (with
reference to 100khz, 8div, frequency
response with-3db.)
rise time: approx.17.5ns (x5 mag:
approx.50ns) approx.8.75ns (x5 mag:
approx.25ns)
approx.7ns (x5 mag: approx.23.3ns)
triggering
triggering source: ch1,ch2,line,ext
coupling: ac: 20hz to full bandwidth
slope:+/sensitivity: 20hz~2mhz:1div, trig-alt:2div
ext:200mv;trig-alt:3div,ext:800mv;
2~20mhz:1.5div;20mhz~40mhz:2.5div;40
mhz ~50mhz:3div;
tv: sync pulse more than 1 div (ext:1v)
triggering modes: auto; norm: tv-v: tv-h:
(both tv-v and tv-h synchronize only
when the synchronizing signal is negative)
ext triggering signal input: input
impedance/: approx:1mω/approx.25pf;
max.input voltage:300v (dc+ac peak), ac:
frequency not higher than 1khz
9
ELE114
d. auto transformer
input section
415vac, 10 a, 3 phase, 50hz.
controls, protections and instruments
section
• mushroom head emergency stop button :
ac 300v, 3a, 22mm, led 220vac
• flat-head push-button switch : ac 300v, 3a,
22mm, red,green
• led indicator : 240v ac, 22mm, red,green
• terminal block : 600v max, 10a
• miniature circuit breaker : 3pole, 240/415
v, 10 a, 50/60 hz
31
Page | 41
• thermal overload relay : 5-8 a adjustable
• magnetic contactor : 3 pole, 220 v- 13a,
440v- 9a
• auxiliary contact block : front mount 2
pole block
• three–phase transformer : 3.75 kw,
415/290 vac
• ammeter selector switch : single pole, 20a,
440v
• voltmeter selector switch : 3φ to neutral,
20a, 440v
• analogue ac ammeter : 20 a
• analogue ac voltmeter : 0~500vac
10
ECS039
dc regulated variable
power supply
led display for voltage & current.
2 meters to read voltage & current for single
power supply.
single output - 0 to 30v voltage. 0 - 2a
current
line regulation cv : + 0.01% +3mv
line regulation cc : + 0.01% +1ma
load regulation cv : + 0.05% +3mv
load regulation cc : + 0.05% +1ma
automatic overload and short circuit
protection.
input : ac 230v +10%, 510hz/ 60hz, single
phase
4
11
ELE106
diesel generator set
with change over switch, over current
breaker and water-cooled with armature,
star-delta connections ac 3 phase, 5 kva, 240
volt
28
12
ECS051
digital and analog
bread board trainer
various ic regulated d.c. supplies +5v, -5v,
+15v, -15v, and a variable d.c. supply 0-15v
are provided.
two clock frequencies 1khz & 10khz
selectable by a toggle switch are provided.
a sine wave generator of 1khz frequency is
provided.
four nos. logic level generators and four nos.
logic level indicators are provided.
one nos. mono pulse generator is provided.
a breadboard of size 2.5” x 6.75” is provided.
a moving coil voltmeters of dual range 1v &
10v dc are provided.
a moving coil ammeter of dual range 200 a
& 10ma dc are provided.
18
13
ECS050
digital ic tester
tests a wide range of digital ic's such as 74
series, 40/45 series of cmos ic’s
it has auto search facility of ic’s
test by: truth table/sequence table
comparison.
zif: 28 pin dip zif sockets.
keys: 16 keys key pad with numerical &
4
Page | 42
functional keys.
display: 16x2 lcd display.
supply input voltage: 9v dc adaptor
14
ECS049
digital ic trainer
digital i.c. trainer :power: 220v± 10% / 50hz
dc power supply: +5v/500ma (in built
regulated)
logic level generators: 16 nos. with led
indication
logic level indicators: 16 nos.
manual pulse generator: 2 nos. for providing
pulses during the experiment
set reset switches: 2 nos.
clock oscillators: continuous variable output
frequency of range 0-100hz, 1khz and
10khz, pulse counter: 0-99 digits
junctions: junction j1 to j6 provided on
motherboard. all pins of each junction are
internally connected
14 pin ic base: 4 nos.
16 pin ic base: 4 nos.
24 pin ic base: 1 nos.
bread board: 1 nos.
junctions: 14 nos. of 4 pin. all pins of each
junction are internally connected
8
15
ECS046
dimmer state
single phase, input 240vac output 0-270vac,
portable ( closed) type desktop model,
3amp current rating.
6
16
ECS038
dual dc regulated
power supply
led display for voltage & current.
4 meters to read voltage/ current of output
for dual power supply.
dual output - two independent outputs of 0±
30v voltage and 0-2a current.
line regulation cv : + 0.01% +3mv
line regulation cc : + 0.01% +1ma
load regulation cv : + 0.05% +3mv
load regulation cc : + 0.05% +1ma
automatic overload and short circuit
protection.
input : ac 230v +10%, 510hz/ 60hz, single
phase.
14
17
ECS069
fiber optic
communication trainer
• should have transmitter of one fiber optics
led having peak wavelength of emission 660
nm using sfh756v & 950nm using sfh450v.
• should have receiver for digital using sfh551v & analog sfh250v
• should have pulse code modulation (pcm)
using motorola mc 145502 codec chip
having manchester coding/ decoding
technique.
• should have white noise source output
type noise generator with amplitude of 0 to
8
Page | 43
5vpp.
• should have 16 bit switch selectable prbs
generator with clock of 32, 64, 128 khz.
• should have bit error rate measurement of
8 bit counter with led indication upto 255
count.
• should have time division multiplexing, 10
channels (64 kbits/sec).
• should have two frame marker of 8 bit
user selectable markers in alternate frames.
• should have data rate of 1.024 mbits/sec.
• should have 2 channels voice pcm with
telephone hand sets (a law).
• should have analog band width of 100m
bit & digital band width of 5m bit.
• should have on board sine generator of
1hz. to 100 khz sine wave (amplitude
adjustable) & square wave (ttl)
• should provide codec link using two
telephone hand set provided
• should have serial pc to pc link using 9 pin
d-type rs232c tx and rx link (max. 115.2
kbps baud)
• should have 8 switched faults
• should supply with 1meter & 5meter fiber
cable.
• all ics are mounted on ic sockets.
• bare board tested glass epoxy smobc pcb
is used.
• in-built power supply of +5v/1.5a,
±12v/250ma with power on indication
• attractive abs enclosure.
• set of 2mm patch cords for
interconnections
• user’s manual with sample experimental
programs
18
ELE078
flux meter
digital lux meter - display -3½ digit , 18 mm
(0.7") lcd , ranges - 0-50,000 lux .(3 ranges) ,
accuracy - + (5% rdg. +2 dgts ) , over -range indication of "i" , sampling time - 0.4 second ,
operating temperature - 0° to 50 °(32° to 122°
f ) , operating humidity - less than 80% r.h. ,
temperature characteristic - + 0.1% / °c ,
repeatabillity - + 2% , photo detector - one
silicon photo diode with filter , low battery
indication - (- + ) , data hold , display in lux ,
power supply - 9v battery (6f 22 ) , dimension
- 116 x 70 x 29 mm (4.6 x 2.7 x 1.1 inch ) ,
weight - 200 g. approx (with battery ) ,
accessories - instruction manual , arrying case
, battery .
29
19
ELE077
frequency meter
0.1 hz - 1mhz, sine square tringle and dc,
output 30 v pp, ttl/cmos triger output,
30
Page | 44
display for frequency & amplitude
20
ECS063
frequency modulator
and demodulator
trainer kit
three built-in ic regulated 5v d.c.,-5v d.c. &
15v d.c.power supplies are provided .
a built-in high frequency carrier is
provided.
the top of the module is of anodized
aluminium panel with circuit diagram and
symbol printed nicely on the panel.
terminals are provided as test points..
a well-illustrated manual is provided with
the module.
all the components are mounted behind the
panel with their leads well specified on the
panel.
the module is of slant shape, which enables
one to perform the experiment with ease
6
21
ECS045
function generator
frequency range : 0.1hz - 2mhz
display : 6 digit led display
output waveforms : sine, triangle, square, ±
pulse, ± ramp
output impedance : 50± 10%
output amplitude : 20vp-p(open circuit)
,10vp-p (with 50 load)
dc offset : 0 to ± 1ov continuously adjustable
symmetry range : 90:10 - 10:90
rising edge of square :
distortion : <1% (at lohz-100khz)
frequency response : 0.1hz - 100khz : ±
0.5db, 100khz -2mhz : ± 1.0db
2mhz function generator
output waveform sine, triangle, square,
ramp, pulse
voltage control frequency (vcf) capability
ttl/cmos and output synchronous output
less than 1% distortion at 10hz~100khz
less than 0.5db frequency response at
0.1hz~100khz
1 hz~30mhz frequency counter
am/fm (optional, model no. with suffix "a")
fm/sweep (optional, model no. with suffix
"c")
2
22
ECS084
home theatre system
4.1 multimedia speakers. 4.1 channel
configuration. total output of 44 w rms. 1
subwoofer. 4 satellites. magnetically
shielded. 55 db signal-to-noise ratio.
volume. bass. fm tuner
5
23
ELE119
inverter
1 kva with 12 v battery input- 12 volt dc,
output- 220 volt ac
29
24
ECS040
lc r meter
displaying: lcd displaying
max. displaying: 1999 (3 ½ digit) auto
polarity indication.
3
Page | 45
low battery indication
operation environment: (0~40) °c, rh.<80%.
power: 9v x 1
range:
inductance: 2mh - 20h,
capacitance: 2nf – 1000uf
resistance: 200Ω - 20mΩ
25
ECS080
lcd tv colour
type : lcd tv display
resolution : 1366 x 768
connectivity : 1 x hdmi & 1 x usb
screen size : 56 cm (22)
refresh rate : 120 hz
flat screen
4
26
ECS082
led tv colour
type : led tv display
resolution : 1366 x 768
connectivity : 1 x hdmi & 1 x usb
size : 56 cm (22)
refresh rate : 120 hz
4
screen
27
ELE118
lux meter
digital lux meter - display -3½ digit , 18 mm
(0.7") lcd , ranges - 0-50,000 lux .(3 ranges) ,
accuracy - + (5% rdg. +2 dgts ) , over -range indication of "i" , sampling time - 0.4 second ,
operating temperature - 0° to 50 °(32° to 122°
f ) , operating humidity - less than 80% r.h. ,
temperature characteristic - + 0.1% / °c ,
repeatabillity - + 2% , photo detector - one
silicon photo diode with filter , low battery
indication - (- + ) , data hold , display in lux ,
power supply - 9v battery (6f 22 ) , dimension
- 116 x 70 x 29 mm (4.6 x 2.7 x 1.1 inch ) ,
weight - 200 g. approx (with battery ) ,
accessories - instruction manual , carrying
case , battery .
34
28
ECS066
microcontroller kits
(8051) along with
programming software
(assembly level
programming)
• 8051 cpu operating @ 10/12 mhz.
• 8k user ram using 6264 with battery
backup using nicd battery.
• one socket is provided for ram expansion
up to 64k.
• 16k bytes of powerful monitor eprom
using 27512.
• 48 i/o lines using 2 nos. of 8255 brought at
26 pins frc connector to interface with ic-xx
series.
• three channel timer/counter using 8253
brought out at 10 pins frc connector.
• 25 keys hexadecimal keyboard and 6 digit
seven segment display using 8279
• two external interrupts int0 & int1 are
available at 40 pin frc connector.
• rs-232c interface using 8251 brought out
at 9 pins d-type connector.
16
Page | 46
• auxiliary rs-232c using rx/tx of 8051
brought out at 9 pins d-type connector.
• two modes of operation:
- keyboard mode.
- serial mode.
• powerful commands like examine/edit
memory, examine/edit register, single
stepping, execution, break point can be used
through hex keyboard or pc serial mode.
• facility for downloading/uploading files
from/to pc.
• all address, data, control & port lines are
available on 40 pins & 20 pins frc connector.
• all ics are mounted on ic sockets.
• bare board tested glass epoxy smobc pcb
is used.
• in-built power supply of +5v/1.5a,
±12v/250ma
• abs plastic enclosure.
• user’s manual with sample programs
29
ELE129
motor pump set
1 hp, 1 phase, 240 v 50 hz
35
30
ELE035
motorised bench
grinder
bench grinder
hp 0.33 kw 0.25 ph 1 hz 50
amp 2, volt 250, rpm 2800
with grinding wheel size: 150 x 20 x 15.88mm,
(one fine & one coarse) rotary switch,
wheel guard, std. tool rest plate & eye shield
31
31
ELE117
oven stove
oven 0 to 350°c,electrically heated
circulation fan to equalise temperature and
ensure uniform heat distribution
explosion panel fitted for safety
over-temperature device prevent runaway
24
32
ECS064
pam, ppm,pwm trainer
kit
pam/pwm/ppm techniques using natural & 8
flattop sampling on-board
250hz,500hz,1khz,2khz sine wave generator
with adjustable amplitude.
sampling clock of 4, 8,16,32 khz
on-board 4th order butterworth low pass
filter with cut off frequency of 3.4khz
in-built power supply
sine wave generator: provides sine
waveform output of 250hz, 500hz, 1 khz,
and 2 khz
amplitude of 0 - 4vp-p
amplitude adjustments possible
pulse generator: switch selectable sampling
clock of 4, 8, 16, 32 khz.
crystal controlled pulse generator.
on-board features: analog sample
circuit/output
sample & hold circuit/output
Page | 47
33
ELE030
pillar electric drill
machine
capacity
drilling cap. in steel 19
drilling capacity in c.i. 22
tapping capacity in steel 16
spindle
spindle travel 125
spindle taper m t- 2
no. of spindle speeds 8
range of spindle speeds 86- 3360
working range
column diameter 73.80
max. distance between spindle centre to
column face 200
max. distance between spindle nose to
working table 365
max. distance between spindle nose to base
plate 635
general
size of square table 270 x 270
size of base plate 550 x 315
electric motor t e f c, 3 phase, 1 h.p., 1440
rpm,
v- belt size a - 43
net wr. of machine in kgs. 99
overall dimensions of the machine 1000 x
675 x 425
wooden case dimensions 1050 x 725 x 475
25
34
ELE029
portable electric drill
machine
material type: virgin plastic
length: 25 cm
voltage: 220/240 v
frequency: 50 hz
capacity: 6 mm
width: 76 mm
power consumption: 350 w
power source type: corded
product type: pistol grip drill
height: 215 mm
no load speed: 2700 rpm
30
35
ECS053
power electronics
trainer with at least 6
no’s of onboard
applications
with atleast 6 no’s of onboard applications
to study characteristics of various following
devices:
(a) various types of diodes.
(b) various types of transistors.
(c) fet
(d) mosfet
(e) ujt/igbt
(f) diac
(g) triac
(h) scr
14
36
ECS068
sensor trainer kit (
containing various
sensors like
( containing various sensors like
thermocouple, rtd, thermocouple, load cell,
strain gauge, lvdt, smoke sensors, speed
10
Page | 48
thermocouple, rtd,
thermocouple, load
cell, strain gauge, lvdt,
smoke sensors, speed
sensor )
sensor )
37
ELE115
shaded pole motor
the temperature rise is limited to 40 degree c.
single phase, 2 pole, skeleton type, 220/230
vac,2880 rpm 30 watts
31
38
ECS042
signal generator
0.1 hz - 1mhz, sine square tringle and dc,
output 30 v pp, ttl/cmos triger output,
display for frequency & amplitude
3
39
ECS076,
ECS075
smart phones of
different make
1 gb ram, min. 4 gb internal memory, 8 mp
camara, 2mp front camara, 1.1 ghz
processor, 4.5 inch display
33
40
ECS072
smps of different make
0-150 vdc ,0-12 vdc / 0-5 vdc to study
different power supply of smps
14
41
ECS085
solar power inverter
solar power inverter -500va (with stand &
installation)
solar panel: 300 w/12v (100wx3)
battery: 150 ah
inverter 500va with charge controller (solar
inverter)
5
42
ECS074
ups
with backup time minimum 30 minutes or
higher
voltage range: when load < 50%, range is
118±5vac ~295±5vac when ± 50% load,
input range is 60±5vac~295±5vac
frequency: 46~54hz±0.5hz
phase: single phase
input power factor: ≥ 0.95
output voltage: 209/220/230/240v ac
frequency range: 50hz ± 0.2%
thd (liner load): <3%
thd (non-liner load): <5%
overload capability:110% 30s turn to
bypass mode;
>150%, 200ms turn to bypass
battery req. 17 ah x 6 or higher (minimum)
shot circuit protection
5 cycles turn off inverter, no transfer to
bypass, provide alarm (ac mode), 5 cycles
turn off inverter, provide alarm (battery
mode), input fuse blown or breaker action
4
Page | 49
43
ECS073
ups trainer
experiments than can be performed
- study of pwm technology
- to understand the overall functioning of
ups trainer
- study ofavr transformer section of ups
- to study the ups circuit in load condition
- to identify different faults and to study the
troubleshooting in ups circuit.
specifications
capacity : 500 va ac input : 190 to 260 v
10%, 50 hz
load output voltage: 230 v / 2.5a
output frequency : 50hz ,accuracy : +5%
switching : automatic. backup time : 10
minutes.
input voltage : +12v dc battery transformer
used
- input : 12 - 0 - 12 v - outputs : 0,190, 220,
240, 260v
- battery charging: 0-18 v
ic sg3524 pwm ic used for pwm switching
4nos of irf3205 mosfet for switching
12v dc battery
all interconnections are made using 2mm
banana patch cords. test points are provided
to analyze signals at various points. 5 no’s of
fault switches provided
all ics are mounted on ic sockets. bare board
tested glass epoxy smobc pcb with block
diagram.
attractiveabs plastic enclosure user manual
for experiments
5
44
ELE105
used dc generatorsseries, shunt and
compound type for
overhauling practice
complete dc machine having its yoke,
(body cylinder withy end shields ) armature
with stampings and commentator fitted to
shaft with ball bearings, armature coils. pole
shoes with insulated pole packing field coil
fitted to it.
rocker arm with carbon and carbon holders
fitted to rear end shield. the former wound
armature coils and taped field coils
complete details of pole pitch and field
connection diagram.
27
45
ELE128
washing machine
semi auto matic 6 kg cap. top loaded 230vac
50hz with buzzer
35
Page | 50
List of Items (Package – 03Mechanical (Equipments))
INDORE ZONE
SN
Item_Code
Item_Name
Specifications
Indic
ative
QTY
1
WEL062
ac/dc gtaw
welding
machine
with water
cooled
torch 300
a, argon
regulator,
ga hoe,
water
circulating
ytem and
tandard
acceorie.
hf / liftarc 1) hf or liftarc ,2/4-stroke 1) 2 stroke or 4
stroke,gas pre flow time 2) 0 - 5 s,slope up-time 0 - 10
s,slope down time 0 - 10 s,gas post flow time 0 - 25
s,current 4 a - max 3),active panel off or on,changing
trigger data off or on,remote control unit off or on,min
current 2) 0-99%,vrd -
22
2
CAR103
adjustable
saw
sharpener
auto pencil sharpener
featuring cartoon design
mixed design of toy & stationenery for fun learning
high graded driving motor, saving enery up to10%
care and safety to children use with best fitting pencil
tip . * battery operated and stainless steel cutting blade
for long lasting use
1
3
WEL070
ag 4
grinder
4 inch. 4.5 amp heavy duty angle grinder
amperage (amps) 4.5
diameter 4 in.
maximum amperage output (amps) 4.5
maximum speed (rpm) 11000 rpm
wattage (watts) 570
arbor size 5/8 in.
accessories included 4 in. grinding wheel, arbor
wrenches, 7/8 in. arbor adapter, spindle lock, wheel,
slide switch, and wrench
29
4
MOT226
air bag
simulator
special two-ohm resistor
for use on 1993 and newer ford system ii air bags
4
5
WEL064
air
compresso
r suitable
for air
plsama
cutting
sytem
hp14.0 pump typetwo stage oil lubricated free air cfm
@ 90 psi17.0 free air cfm @ max. pressure15.7 max.
pressure175 psi tank size30 gal. tank typehorizontal
asme tankyes voltage120/240 rated watts3000/4500
max. watts @ 120v5000 amps @ 120/240v41.5/20.8
hz60 number of outlets5 (f)npt outlet1/4" rpm3600
watts4500
18
6
WEL063
air plasma
cutting
equipment
25 mm cap.a. power source (diode based)
1. input supply : 380 to 440v 3 phase, 50 hz.
2. secondry voltage : 260-280 v
14
Page | 51
with all
acceorie,
capacity to
cut 25 mm
clear cut
3. line current : 30 amps
4. arc current : 80 amps
5. output current (duty cycle) : 100% at full load
current of 80amps.
6. ocv (no load) : 300 – 320 v dc
7. power rating : 22 kva
8. output control : diode based controlled
9. cooling system :forced air cooled transformer.
10 class of insulation : ‘f’. :
11. cutting capacity (a) ss clean cut : 20 mm
(b) continuous cutting : 5 mm
b. cutting torch ( hand operated)
1. current rating . : 85amp.
2. length of cable : 7.5 meters
3. cooling : air cooled
4. air pressure : 50 psi at 11 cfm
5. duty cycle : 80%
6. cutting capacity (a) ss clean cut : 20 mm
(b) continuous cutting : 5 mm
7
DSL188
automotive
exhaust 5
gas
analyzer
(petrol &
diesel) or
diesel
smoke
meter
measure range (resolution)
co: 0~9.000% (0.001%)
co2 : 0~20.00% (0.01%)
hc : 0~10,000ppm (1ppm)
o2 : 0~25.00% (0.01%)
lambda : 0.050~3.00(0.01)
afr: 7.35~29.40(0.01)
6
8
CAR110
band saw
machine
with
provision.
main technical parameter of this angle band saw
machine:
max.cutting capacity(mm):
0° round material:350
square material:500wx300h
45° round material:350
square material:350wx340h
angle: 0°~45°
speed(m/min):26/60/75
saw blade:size(mm):34x1.1x4700
guides:carbide and bearing blade guides
cleaning:wire brush&flood coolant
tension:manual
blade(kw): 3.0
motor output: hydraulic(kw):1.1
coolant(kw): 0.075
work table height(mm): 750
work conveyor: manual
work vice: hydraulic
1
9
SEWT031
bar tack
machine
lubrication type usage max. sewing speed max. stitch
length height of presser foot
minimum lubrication light and medium materials
heavy materials 3,000sti/min 5mm 7mm
4
Page | 52
10
WEL069
bench
grinder
fitted with
fine grain
ize ilicon
carbide
green
grinding
wheel dia.
bench grinder
hp 0.33 kw 0.25 ph 1 hz 50
amp 2, volt 250, rpm 2800
with grinding wheel size: 150 x 20 x 15.88mm,
(one fine & one coarse) rotary switch,
wheel guard, std. tool rest plate & eye shield
12
11
DSL189
bench
lever
shears
250mm
blade x
3mm
capacity
model bs406 plate -8 ,angle plate-40 x6,maximum
strip- 10 x100,bar(mm)- 16 ,jawwidth-250
5
12
CAR098
bench
rinder
pedestal grinder
direct driven with inbuilt motor
mounted on c.i. pedestal stand
hp 1.0 kw 0.75 ph 3 hz 50
amp 1.6 volt 415 rpm 2800
complete with grinding wheel size: 200 x 25mm x 19.05
mm
(original bore 31.75 mm) ,fitted with eye shield, starter,
wheel guard, and standard tool rest plate & drill grinding
attachment ( upto 19 mm)
wheel centre dist. : 460mm
centre height
: 940mm
1
13
SEWT029
button hole
machine
cutter length : 4-32mm max. sewing width : 6mm max.
button hole length : 40mm height of presser foot :
13mm max. sewing speed : 4,000sti/min
4
14
SEWT030
button
sewing
machine
usage max. sewing area dimensions of buttons max.
4
sewing speed stitch length max. no. of stitches
button attaching 6.4x6.4mm outer diameter of button 830mm 2,700sti/min 0.05-6.4mm 5,000stitches/pettern
15
WEL060
d.c arc
welding
rectifier et
with all
acceorie
(400 a. ocv 60 – 100 v, 60% duty cycle ) rated input
voltage (v)-415±15%,input frequency (hz)-50,rated
power at max. current (kva)-9.5,duty cycle-60%
10
16
FIT178
d.e.
pedestal
grinding
machine
with
200mm
diameter
pedestal grinder
direct driven with inbuilt motor
mounted on c.i. pedestal stand
hp 1.0 kw 0.75 ph 3 hz 50
amp 1.6 volt 415 rpm 2800
complete with grinding wheel size: 200 x 25mm x 19.05
mm
6
Page | 53
wheels
rough and
smooth
with twist
drill
grinding
attachment
.
(original bore 31.75 mm) ,fitted with eye shield, starter,
wheel guard, and standard tool rest plate & drill grinding
attachment ( upto 19 mm)
wheel centre dist. : 460mm
centre height : 940mm
17
MOT233
diesel
engine –
crdi - 4
stroke for
dismantlin
g and
assembling
with
swivelling
stand
9 auto-2/09 grease gun heavy duty trolley type 10 kg
capacity 1,heavy commericial vehicle type(without
body on frame),hydraulic jack hi-lifttype -3 ton capacity
2
18
DSL190
diesel
engine crdi - 4
stroke for
dismantlin
g and
assembling
with
swivelling
stand
9 auto-2/09 grease gun heavy duty trolley type 10 kg
capacity 1,heavy commericial vehicle type(without
body on frame),hydraulic jack hi-lifttype -3 ton
capacity,and 5 ton capacity
5
19
MOT234,DSL
191
diesel
engine (
running
condition )
stationary
type
20
DMC018
digital
theodolite l
atest
model with
all
accessories
(features:-based on laser technology, two large lcd
panelwith easy to read ,automatically compensates tilt
in two direction and compensates vertical angles. high
integratedelectronic board and ic elements)
8
21
MOT235,DSL
192
discrete
component
trainer /
basic
electronics
trainer
ic based dc reg. power supplies : a.) +12 v / 500 ma b.) 0
to +12v/ 500 ma c.)-12v/500 ma d.) 0 to -12v/ 500 ma
e.) +5v i 500ma
ac supplies : 9-0-9 v ac / 500 ma.
veroboard : unique veroboard type socket with
termination for use of external components i ic’s up to
20 pin without soldering.
potentiometer : three potentiometers (1k,1ok and look)
with terminations.
speaker : one 8 ohms miniature speaker with
terminations.
10
4
Page | 54
relay : one 1 2v i 1 c. 0. relay with terminations.
power on : power on switch with indicator for mains on
indication and fuse for protection.
patch cords : set of 20 assorted coloured multi-stand
wires with 2 mm termination at both ends.
power : 230v 10% single phase ac. requirement
instruction manual : one detailed instruction manual
with well thought out experiments covering the above
topics.
22
SEWT028
double
needle
machine
2mm-12mm set of 16 pairs 34cm (14 inch) in cotton
case single point bamboo knitting needles by curtzy tm
(32 knitting…
2
23
CAR099
drill
combo of a simple drill 12 mm + 6hss bits+ 1 masonry
machine 12 bit, power: 300watts, rpm: 2300rpm, voltage-220,
mm.
motor: copper, outer body: pvc and metal,
capacity
1
24
FIT176
drilling
machine
bench
sensitive
drilling capacity in steel-13,tapping capacity in
steel,morse taper in spindle-1 ,spindle traverse100,vertical adjustment of spindle head-425,pillar
diameter-57.15,distance between centre of spindle and
column front-149,max. distance between spindle and
table-300 max. distance between spindle and base500,table working surface-200 x 200
(with coolant gutter),no. of spindle speeds-4,range of
spindle speeds (rpm)-480 - 820 - 1320 - 2080
18
25
MOT236
drilling
machine
bench to
drill up to
12mm
drilling capacity in steel-13,tapping capacity in
steel,morse taper in spindle-1 ,spindle traverse100,vertical adjustment of spindle head-425,pillar
diameter-57.15,distance between centre of spindle and
column front-149,max. distance between spindle and
table-300 max. distance between spindle and base500,table working surface-200 x 200
(with coolant gutter),no. of spindle speeds-4,range of
spindle speeds (rpm)-480 - 820 - 1320 - 2080
2
26
DSL193
drilling
machine
bench to
drill with
accessories
12mm dia along with accessories
1
27
FIT175
drilling
machine
pillar
sensitive
0-20 mm cap with swivel table motorised with chuck &
key. powerful motor 350w
13000 rpm
with dust bag
dust protection mask
8
28
CAR109
electrical
drying
oven
(small
temperature range: ambient + 10 deg. c to +350 degrees
c
includes latch and strike to ensure easy opening and
closing
easy-to-maintain stainless steel interiors
1
Page | 55
type).
large-area all-round heating, with radial fan for air
29
SHD002,SECP
001
fax
machine
(latest
model)
28-page document memory enhanced copier functions
distinctive ring detection 2-line lcd readout 64-level
halftone resolution polling function friendly fax
reception extension line transfer supc: 1767621
navigator key for easy operation
6
30
CAR112
fire
buckets.
fire buckets made up of iron with stand ,10lt.
capacity,weight aprox 2kg
4
31
CAR111
stored pressure (abc) type
fire
extinguishe fire extinguisher 2 kg. capacity designed as complete with
r.
all the fittings and accessories with isi mark and ce
approved suitable for ëaí ëbí ëcí class of fire with isi mark
map powder confirming to is: 14609 with pressure guage,
discharge hose and nozzle. temperature range : -30∞c to
+55∞c;fire rating: 1a 8b
1
32
FIT177
forge
portable
hand
blower 38
cm to 45
cm.
air blower high speed 13000rpm 550 watt ,hand held
cum vacuum cleaner with dust bag
8
33
WEL061
gmaw
welding
machine
400a
capacity
with air
cooled
torch,
regulator,
ga
preheater,
ga hoe and
tandard
acceorie
400 amp,
number of phases- 1 , rated frequency50/60hz ,rated input voltage- 208/230v 460v input
voltage range- 208/230v ±10% 460v ±10% ,rated
input power- 1.3kva 8.4kw/ 11.2kva 8.3kw 10.9kva
8.1kw , rated input current- 54.2/48.8a 23.7a 4
,rated output current-250a rated load voltage26.5v,rated output-30 - 250a ,current range-30 - 250a
,rated output-12.0 - 26.5v
voltage range-12.0 - 26.5v , maximum - 71/78v 70v
no load voltage- 71/78v 70v , rated duty cycle- 60%
60%
24
34
MOT240,DSL
196
grinding
machine
(general
purpose)
d.e.
pedestal
with
pedestal grinder direct driven with inbuilt motor
mounted on c.i. pedestal stand
hp 2.00 kw 1.5 ph 3 hz 50
amp 3.5 volt 415 rpm 1400
complete with grinding wheel size :300 x 50 x 31.75 mm
(original bore 50.8 mm,)(one coarse & one medium)
fitted with eye shield, siemens starter,
wheel guard, & std tool rest plate
wheel centre dist. : 615mm
centre height
: 940mm
4
35
DMC020
hand held
gps with
standard
built-in quad helix receiving antenna
high-contrast fstn,
4-level gray scale (120 x 160 pixels) display
10
Page | 56
specificatio
n (latest
model)
backlit display & keypad
permanent user data storage
36
MOT241
hand
operated
hydraulic
press
distance between column in m.m.: 450 x 175, distance
between ram to bed in m.m.: 100 x 400, travel of ram
hand operated: 80, travel of ram power operated: 100,
motor h.p.:- 1
3
37
WEL074
hands
shearing
machine
capacity to
cut 6 mm
sheet and
flat
6 mm capacity
size above 10 inches to 20 inches
arm type
10
38
DSL198
hydraulic
jack hi-lift
type
use: jack ; zhe capacity (load): 1-10t max height:
500mm certification: tuv, gsb rand name: kingpai 5 ton
capacity
2
39
DMC019
instrument
for total
station wit
h latest
model,
with all
accessories
(graphic lcd display on both side.multy function key
board on both side. able to interchange data between
gps and total stationwithout any data conversion.
minimum 8 hours rechargeable li-ionbattery .poles and
prism 2nos each)
8
40
MCH163
lcd
projector /
large
screen tv
sku it.it.pr.310291 type of product
hdmi projector
model no
cp-rx250
projection system
dlp
native resolution
1024 x 768
brightness
2700
contrast ratio
2000 : 1
aspect ratio
4:3 (xga)
lamp type
4000 hours
lamp(normal/economic mode/smarteco mode
5000 hours
weight
3 kg
power supply
215 watt
power consumption
100v - 240v
3
41
CAR097
mortising
(combine hollow chisel and chain) maximum size of
chain 20 mm
1
Page | 57
machine
maximum size of chisel 12 mm
depth of bore 150 mm
longitudal table movement 230 mm
lateral movement 150 mm
hp required 3 hp
floor space required 750 x 850 mm
42
MOT246,DSL
200
multi scan
tool with
oscilloscop
e
2 channel pc oscilloscope/car diagnostic tool
oscilloscope supply ability: 1000 piece/pieces per week
10
43
MOT135
oscilloscop
e 20 mhz
horizontal system
sweep time: 0.2usec~0.5sec/div,20steps in 1-2-5
sequence; sweep time accuracy:±3% vernier sweep
4
time control:≤1/2.5 of panel-indicated &#118alue;
sweep magnification: 10 times;
×10mag sweep time accuracy: ±5% (20nsec~50nsec
are uncalibrated);
linearity:±5%,×10mag: ±10% (0.2s~1us) position shift
caused by ×10mag: within 2div. at crt screen center
x-y mode:
frequency bandwidth: dc to at least 500khz;
x-y phase difference:≤3°at dc~50khz
sensitivity: same as vertical axis. (x-axis:ch1 input
signal; y-axis:ch2 input signal.);
calibration voltage
waveform: positive-going square wave;
frequency: approx. 1khz;
duty ratio: within 48:52;
output voltage: 2vp-p±2%;
output impedance: approx.1kω
calibration signal
waveform: positive-going square wave;
frequency: approx. 1khz;
duty ratio: within 48:52;
output voltage: 2vp-p±2%;
output impedance: approx.1kω
crt
type: 6-inch rectangular type, internal graticule;
phosphor:p31;
acceleration voltage:
approx.2kv(20mhz)/approx.12kv(40mhz);
effective screen size:8×10div[1div=10mm(0.39in)];
graticule: internal;
trace rotation: provided
vertical axis
sensitivity:5mv~5v/div,10 steps in 1-2-5sequence
sensitivity accuracy:≤3%
vernier vertical sensitivity: continuously variable to
1/2.5 or less of panel-indicated &#118alue frequency
bandwidth:
dc~20mhz(x5mag:dc~7mhz)/dc~40mhz(x5mag:dc~1
5mhz)dc~50mhz(x5mag:dc~15mhz)
Page | 58
ac coupling: low limit frequency 10hz. (with reference
to 100khz, 8div, frequency response with-3db.)
rise time: approx.17.5ns (x5 mag: approx.50ns)
approx.8.75ns (x5 mag: approx.25ns)
approx.7ns (x5 mag: approx.23.3ns)
triggering
triggering source: ch1,ch2,line,ext
coupling: ac: 20hz to full bandwidth
slope:+/sensitivity: 20hz~2mhz:1div, trig-alt:2div
ext:200mv;trig-alt:3div,ext:800mv;
2~20mhz:1.5div;20mhz~40mhz:2.5div;40mhz
~50mhz:3div;
tv: sync pulse more than 1 div (ext:1v)
triggering modes: auto; norm: tv-v: tv-h: (both tv-v and
tv-h synchronize only
when the synchronizing signal is negative)
ext triggering signal input: input impedance/:
approx:1mω/approx.25pf;
max.input voltage:300v (dc+ac peak), ac: frequency not
higher than 1khz
44
WEL077
oven,
electrode
drying 0 to
350°c, 10
kg capacity
0 to 350°c,
power supply
with 230v ac, 50
two types of wires, slaver and cleaner
230/240v ac available
rod capacity: 10kg
rod length: 450mm (500mm available)
maximum temperature: 350 ± 15° c
voltage: 220/230v ac
6
input
45
SEWT026
over lock
machine 3
thread
best 26 in 1 portable & compact magic mini electric
sewing machine works on battery cum electricity
operated with adapter foot pedal multi color thread
rolls bobbins combo adjustable straight stitch and
reverse sewing - practical mini machine for mending,
hemming and basic sewing.
choice of foot pedal or auto-sewing mode - if it's not
convenient to use the foot pedal, you can set the sewing
speed to either h for high or l for low.
sews in a durable chain locking stitch.
small and portable - runs on either ac/dcpower or 4 aa
batteries (not included).
work light - concentrates light right where you need it.
colours as per availability.
1
46
WEL068
pedetal
grinder
fitted with
coare and
medium
grain ize
pedestal grinder direct driven with inbuilt motor
mounted on c.i. pedestal stand
hp 2.00 kw 1.5 ph 3 hz 50
amp 3.5 volt 415 rpm 1400
complete with grinding wheel size :300 x 50 x 31.75 mm
(original bore 50.8 mm,)(one coarse & one medium)
14
Page | 59
grinding
wheel dia.
fitted with eye shield, siemens starter,
wheel guard, & std tool rest plate
wheel centre dist. : 615mm
centre height
: 940mm
47
DSL201
pipe
bending
machine
12mm to 30mm (hydraulic type)
6
48
DSL202
pneumatic
rivet gun
with
standard
accessories
13 piece batco 3x rivet gun kit with rivet sets & fitted
storage case
11
49
CAR084
portable
circular
saw
machine
compact and light weight on top of the standard
rated power input 1,100 w
saw blade diameter 184 mm
cutting depth (90°) 65 mm
2
50
CAR102
portable
discsander
200 mm.
dia
for use with draper belt and disc sander stock no.
50021. assorted pack comprises 1 x 60, 2 x 80, 1 x 100
and 1 x 120 grit grades.packed five discs per pack.
1
51
WEL076
portable
drilling
machine
(cap. 6
mm)
cap. 6 mm power: 300watts, rpm: 2300rpm, voltage220, motor: copper, outer body: pvc and metal,
domestic drilling machine with chuck and key
14
52
CAR100
portable
electric
drill 6 mm.
(woif type)
capacity
drilling diameter: 6 mm rated voltage: 110240v/120vfrequency: 50/60hzdrill type: impact
drillno-load speed: 0-3000rpm
1
53
WEL067
portable ga
cutting
machine
capable of
cutting
traight &
circular
with all
acceorie
6, mainly for straight line cutting and for circular
cutting ф200mm. 7 ,single torches cutting, groove
15
portable jig
saw
machine
power: 600-watt. variable speed (800-3000
strokes/minute). bevel cut: 0-45 degrees. depth of cut:
wood-85mm, steel-5mm, aluminium-15mm. cable
length: 3 metres.
autoselect® system selects the optimum speed and
pendulum blade action according to the application
selected. accu-bevel® system gives tool-free preset
bevelling shoe adjustments. superlok® tool-free
universal blade clamp accepts both u & t shank blade
54
CAR088
range l.y.v(45°) cutting thickness: 6-100mm. cutting
speed: 50-750mm/min. dia circle cutting:
2
Page | 60
on board magnetic blade storage system. integral dust
management system provides either dust blow or dust
extraction.
rubber grip areas to increase comfort. lock-on switch
for increased comfort during prolonged cutting tasks.
sightline channel gives better views of the line of cut
includes: ks900ekx jigsaw, carrying case, vacuum
adapter and 13 blades (3 + 10 free blades). 6 months
manufacturer warranty.
55
CAR085
portable
planing
machine
powerful 15.0 amp, 20,000 rpm motor handles larger
cuts in wider materials with ease
three knife cutter-head with 10,000 rpm cutter head
speed delivers 30% longer knife life and makes knife
change faster and easier
two speed gear box allows users to change feed speed
to optimizing cuts per inch at 96 or 179 cpi
fan-assisted chip ejection vacuums chips off of the
cutter-head and exhausts them out of the machine
19-3/4" cast aluminum base is 2x more rigid than a
standard 10" base and folding tables
automatic carriage lock reduces the movement that
causes snipe without the need for manual engagement
by the user
material removal gauge and extra-large thickness scale
deliver accurate cuts with every pass
extra-large turret depth stop allows user to return to
most frequently used thicknesses with ease
2
56
CAR089
portable
router
machine
operating system-windows 8 (32bit/64bit), windows 7
(32bit/64bit), windows vista (32bit/64bit), windows
xp (32bit/64bit), mac os x 10.4, mac os x 10.5, mac os x
10.6, mac os x 10.7, linux, utilities-device discovery,
firmware restore, setup utility,frequency-2.4
ghz,network standard-ieee 802.11b, ieee 802.11g, ieee
802.11n, ieee 802.3, ieee 802.3u, ieee 802.11i, ieee
802.11e, ipv4,wan-rj-45,number of antenna-1,number
of lan ports-4,lan-rj-45,number of wan ports-1,antennaexternal,
1
57
CAR087
portable
sander
machine
specifications for sanders and sanding machines include
mounting style, rotary speed, surface or linear speed,
power, current, driver technology and motor voltage
and phase. choices for mounting style include: bench,
floor-mounted, handheld, portable, robotic, and tool
post. rotary speed and surface speed (linear speed)
indicate the speed of the grinding wheels, buffing pads,
abrasive discs, polishing naps, abrasive products, or
other rotary tools that can be mounted on and driven by
a sander or sanding machine. in terms of driver
technology, some sanders and sanding machines are
driven by an electric motor or combustion engine.
others are air-powered or pneumatically-driven. there
are six choices for motor voltage and phase: 115 / 120 v
60 hz, 208 – 230 / 240 v 60 hz, 460 / 480 v 60 hz, 50 hz,
single-phase, and three-phase. single-phase power has
1
Page | 61
one sinusoidal or other alternating voltage pattern.
three-phase power contains three simultaneous
sinusoidal or other alternating voltage patterns,
typically 120° out of phase with each other.
sanders and sanding machines differ with regard to
automation and options. manual sanders require
manual loading and then manual setup and operation.
automatic sanders or indexing machines load the
workpiece automatically and can be operated without
user intervention. sanders and sanding machines with
computer numerical control (cnc), a programmable
logic controller (plc) or a microsoftregistered: ®
windowsregistered: ® (microsoft, inc.) interface are
also available. options for sanders and sanding
machines include: cabinets and enclosures, doublesided operation, dressing systems, dust collection and
filtration systems, multiple heads, variable or multispeed control, conveyors or continuous-feed
mechanisms, load arms or robotics, and vacuum
loaders.
58
CAR086
power drill
machine
combo of a simple drill 10mm + 6hss bits+ 1 masonry
bit, power: 300watts, rpm: 2300rpm, voltage-220,
motor: copper, outer body: pvc and metal, domestic
drilling machine which you can operate single
handedly, it has a safe and insulated shock proof plastic
make, ergonomic design for easy grip, you can put up
your precious painting collection, murals, hangings and
wall decoratives on your wall, using this drilling tool,
for an effortless masonry dealing in your household
2
59
TUR117
power saw
machine –
hydraulic
feed
system –
400
mm.blade
size.
hss sawblade diameter250- diameter400mm standard
diameter300 mm.
hydraulic automatic type.
workpiece feeding, clamping, and cutting off are
automatic and continuously performed.
1
60
WEL075
power saw
machine
18’’
570 watt motor
230v-50hz
multi speed regulator for efficient cutting
800-3000 rpm
bewel/angular cutting support
13
61
WEL066
spot
welding
machine to
supply v 415± 10%
phase ph 2
frequency hz 50
load kva 15
thoat depth mm 280 ~ 330
thoat clearance mm 190
output current a 3800
clamping force kgf appx. equal to. 128
with all acessories
21
Page | 62
62
CAR096
tenoning
machine
maximum tenon cut length 152 mm
width 370 mm
thickness 127 mm
max. tenoning cutterhead size 110 (dia.) 152 mm (long)
max. shaping cutter size 10”
max. sawblade diameter 12”
spindle diameter tenon spindle 1 ¼”
cope spindle 1”
saw spindle 1 ¼”
spindle speed tenon spindle 3400 rpm
cope spindle 3600 rpm
saw blade 2800 rpm
motor horsepower saw & tenon head 5 hp
cope head 3 hp
sliding table area 1280x450 mm
1
63
FIT179
transforme
r welding
set 150
amps. –
continuous
welding
current,
with all
accessories
and
electrode
holder
arc current: 140a;160a;,rated duty cycle: 20%,power
voltage: single phase 220v/380v,usable electrode: 1.63.2mm;1.6~4mm;2.5~4mm;2.5~5mm;2.5~6mm;
11
64
DSL205
trolley type
portable
air
compresso
r single
cylinder
45 liters capacity air tank, along with accessories &
with working pressure 6.5 kg/sq cm
2
65
MOT257
ultrasonic
injection
cleaning
equipment
48 “vibra-bar®” transducers, 84 piezoelectric (pzt)
stacks
4,000 watts of “simultaneous multi-frequency™”
ultrasonic cleaning power
four (4) 1000 watt, 40khz immersible transducers, 316l
stainless steel
opposing side mount configuration- two per side
nema 4x control box
power intensity controls
7500 watts of heat, thermostatically controlled,
stainless steel, screw plug immersion heater, capable of
heating tank above 160 degrees f, will not interfere with
working dimensions 12 gauge, 316l stainless steel tank
double wall stainless steel construction
digital timer for controlling ultrasonic wash time
digital temperature controller, omron e5cs-x
two piece, stainless steel lift off cover, with handles
4
66
CAR108
universal
min.order quantity: 1 set/sets
1
Page | 63
wood
working
machine
supply ability: 10 set/sets per week
port: qingdao
payment terms: l/c,t/t
67
MOT258,DSL
206
welding
plant oxyacetylene
complete (
high
pressure)
fuel type oxygen/acetylene
material brass torch handle and regulators
welding capacities welding material: 1/16 in.; oxyacetylene cutting: 1/2 in.
hose length 12 ft.
accessories included torch handle, cutting attachment,
oxygen and acetylene compressed gas regulators, 3-101
#0 cutting tip, vm-w #0 welding nozzle, 1/4 in. x 12-1/2
ft. twin welding hose with 1/4 in. fittings, goggles, flint
striker, tip cleaner, spare o-ring and carrying case
11
68
WEL092
welding
proce,
inpection &
code dvd/
cd
structural welding code
asme boiler and pressure vessel code
spot examination of welded joints
astm standards
api standards
17
69
WEL091
welding
simulator
for
smaw/gta
w/gmaw
virtual immersion turnkey system powered by the
153
detection of sensors that are placed on accessories in
motion
• realistic immersive 3d environment with simulation of
virtual smoke, sparks, and welding sounds
• 5-minute setup
• touch screen with the possibility to display on
external monitors
• single-phase power suitable for 120 or 220/230v
• real welding torches
• height adjustable telescopic table for better
ergonomics and support for vertical and overhead
welding positions , features• 3 real welding torches for more accurate feel and
durability:
o gmaw/fcaw/mcaw
o smaw with virtual electrode
o gtaw/tig torch with virtual electrode and high
frequency welding pedal
• gmaw, mcaw, fcaw, smaw & gtaw/tig processes
• travel angle, work angle, arc speed, motion
straightness
and stick-out variation guides
• multi-pass welds on various plate thicknesses
• flat, horizontal, vertical and overhead welding
positions
• mild steel, stainless steel and aluminum alloys
• various assembly sizes
• lap, fillet, corner and groove joint configurations
70
WEL059
welding
tranformer
(or)
inverter
baed
(300a , ocv 60 – 100 v, 60% duty cycle) primary supply
voltage-415, max. cont. hand welding current,@ 60%
duty cycle-200 ,@ 100% duty cycle-150,welding
current voltage-40-300,open circuit voltage-60,rating @
60% duty cycle-15,electrode range-14-6,recommended
18
Page | 64
welding
machine
with all
acceorie
switch fuse-40,class of insulation-atype of coolingair/oil,dimension (in inches)-31x20x23
71
WEL058,MOT
259,DSL207
welding
tranformer
with all
acceorie
( 400a, ocv 60–100 v, 60% duty cycle) primary supply
voltage-415, max. cont. hand welding current,@ 60%
duty cycle-200 ,@ 100% duty cycle-150,welding
current voltage-40-300,open circuit voltage-60,rating @
60% duty cycle-15,electrode range-14-6,recommended
switch fuse-40,class of insulation-atype of coolingair/oil,dimension (in inches)-31x20x23
17
72
MOT260
wheel
alignment
machine –
computeris
ed 3d
measurement 8 sensor type
sensor gravity & psd sensor with height quality analysis
communication wireless (bluetooth-rf type)
power supply 220v single phase 60hz 400w
measuring head power supply 6v/3v
battery life after recharging minimum of six hours in
case of wireless type
3
73
MOT261
wheel
balancing
machine
dimensions (width / length / height)
without cover: 80 cm / 70 cm / 150 cm.
with cover: 120 cm / 110 cm / 155 cm.
complete total weight: 275 kg.
net machine weight: 230 kg.
wheel rim size range: 10 to 20 inches
maximum wheel weight: 65 kg.
electrical connection: 360v to 400v ac.
operating current frequency: 50 hz ac.
2
74
DSL208,MOT
262
working
condition
of diesel
engine crdi - 4
stroke
engine
assembly
with fault
simulation
board
1. real and operating crdi diesel engine, illustrating the
structure and working process 2. coloured circuit
diagram on the training module printed on to 6mm
organic glass base..
7
75
SEWT027
zig zag
multi
purpose
machine
multi purpose
1
Page | 65
List of Items (Package – 04 Mechanical (Tools))
INDORE ZONE
SN
Item_Code
Item_Name
Specifications
Indicative
QTY
1
ELE103
3- point d.c. starter
3-point dc starter.
3 point d.c. motor starter suitable to
work on 5 h.p. d.c. motor, voltage
230/250 with a maximum 15% full
load current the starting period does
not exceed 30 seconds with under
voltage and an over load release
device.
28
2
DMM006
3d visualiser
portable 3d visualizer classic office
education 5 mega pixels hdmi 1080p
visual presenter digital smart
classroom a4 audio led
1
3
ELE104
4- point d.c. starter
4-point dc starter :4 point d.c. motor starter suitable to
work on 5 h.p. d.c. motor, voltage
230/250 with a maximum 15% full
load current the starting period does
not exceed 30 seconds with under
voltage and an over load release
device
28
4
MOT225
5 point relays
voltage: 12v
load: 30 amperes
8
5
ELE076
a.c. energy meter, single
phase
5 amp. three phase 15 amp
36
6
ELE125
a.c. fan 40 "
fan 40 "
39
7
MOT020
ac alternator slip ring
puller
(pipe wrench 350 mm )
4
8
FIT162
adjustable pipe chain
tonge to take pipes up to
300 mm.
adjustable pipe chain tonge to take
pipes up to 300 mm.
9
9
FIT096
adjustable pipe tap set
bsp with die set cover
pipe size 15,20,
25,32,38,50 mm.
1) pipe die set complete bsp
set ½", ¾", 1", 1 ¼", 1½", 2" , with
die stock
2) hand tap set bsp set of 2. size
½",¾", 1", 1¼", 1½", 2"
3) adjustable tap handle size ½", ¾",
1", 1 ¼", 1½", 2"
11
10
FIT163
adjustable spanner 380
mm long.
adjustable spanner size - 380 mm. from high strength i beam section
9
Page | 66
phosphate vanadium steel for
improved strength and rigidity , the
jaws are heat treated for extended
tool life , high polished corrosion resistant finish , 15° offset head
angle for positive torque control ,
slimline tapered jaws for improved
access into confined spaces , parallel
jaws with smooth jaw adjustment
and self-locking design prevents the
jaws opening unintentionally even
when under full load .
11
DSL021,
MOT021
adjustable spanner jaw
size pipe wrench size
350 mm long
adjustable spanner size 350 mm front high strenght i bean section
phosphate vanadium steel for
imporoved dtength and rigidity, the
jaws are heat treated for extended
tool life, high polished corrosion
finish, 15 degree offset head angle
for positive torque control, alimline
tapered jawas for improved access
into confirmed spaces, parallel jaws
with smooth jaw adjustable and sel
locking design prevents the jaws
opening unintentionaly even when
under full load.
11
12
MCH035
adjustable spanner pipe
wrench size 300 mm
long
adjustable spanner size 300 mm
front high strenght i bean section
phosphate vanadium steel for
imporoved dtength and rigidity, the
jaws are heat treated for extended
tool life, high polished corrosion
finish, 15 degree offset head angle
for positive torque control, alimline
tapered jawas for improved access
into confirmed spaces, parallel jaws
with smooth jaw adjustable and sel
locking design prevents the jaws
opening unintentionaly even when
under full load.
2
13
MOT022
air blow gun with
standard accessories
heany commercial vechle
3
14
MOT023
air brake assembly
bendix 229821 type 50 rotochamber
2
15
MOT228
air conditioning service
unit (car)
automatic/manual
power supply : 230 v, 50 hz
manometers : 100 mm, class 1
service hoses : 300 cm/sae-j2196
,600cm (optional)
lcd : 3.5" color display
printer : print possible
compressor : 10.1 cc
4
Page | 67
vacuum pump : 132 l/min
refrigerant tank : 22 l
scale resolution : r134a 5 gr
oil, uv 1 gr
conformity : ce/ped
16
MOT229
air conditioning trainer
kit
17
MOT024
air impact wrench with
standard accessories
18
MOT025
air ratchet with
standard accessories
air conditioner complete set with
stand
the engine for driving compressor in
this demonstration kit is totoyo 5afe fasoline engine.
the engine cc : 1500 cc. fuel engine :
petrol
air cond component : compressor
type : rotary, condenser unit, cooling
fan, condenser unit, cooling fan,
evaporator, 4 speed fan control,
electronic thermostat, thermometer
can be read both ºc and ºf c/w
diaghram wiring unit and pressure
gauge
low and high
4
13
1/2" single hammer impact wrench
kit. square drive (inch):
1/2" speed(rpm): 7000
14
sku: pib-ff-20c
title: electric wrench pib-ff-20c
19
ELE031
allen key
type of tool- drill machine
maximum capacity in steel- 6.5 mm
maximum capacity in wood- 15 mm
reverse rotation- no
chuck size- 6.5 mm
power consumption- 350 watts
power source- corded
voltage- 240 v
26
20
DSL001,
dsl025,
MOT001,
MOT026
allen key of 12 pieces
(2mm to 14mm)
97
21
ITE019
allen key set (set of 9)
brown finish box packing, akm-9
2
22
MOT027
alternator assembly
used for lmv
1 alternator assembly used for lmv 2
anti theft device 3 carburetor –
solex, mikuny for dismantling and
assembling 4 cylinder liner- dry &
wet liner, press fit & slidefit liner 5
different type of engine bearing
4
Page | 68
model 6 different type of piston
model 7 functional/experiment
model of different type of sensors. 8
glow plug tester 9 oil pump for
dismantling and assembling. 10
radiator pressure cap 11 starter
motor axial type, pre-engagement
type & co-axial type 12 tandem
master cylinder with booster 13
thermostat 14 water pump for
dismantling and assembling 15
wheel cylinder 16 wiper motor
assembly 17 4 point relays 18 5
point relays 19 horn and horn relay.
- see more at:
23
MOT028,
DSL026
ammeter
300a/ 60a dc with external shunt
45
24
MCH037,
MOT030,
TUR082,
DSL028,
FIT027
angle plate
size 200 x 100 x 200 mm
40
25
MCH038,
MOT029
angle plate adjustable
250 x 150 x 175 mm
6
26
MOT031
anti theft device
sku: roots-remote-042
title: xtreme-in monster anti-theft
alarm system for yamaha rxz -rootsremote-lock-043
4
27
FIT126,
MOT032,
DSL029
anvil 50 kg.
anvil 50 kg. mild steel
29
28
FIT127
anvil stand
anvil stand.
24
29
FIT157
arm strong type tool bit
holder l.h.
arm strong type tool bit holder l.h.
5/16
22
30
FIT156
arm strong type tool bit
holder r.h.
arm strong type tool bit holder r.h.
5/16
24
31
FIT158
arm strong type tool bit
holder straight.
arm strong type tool bit holder
straight. 5/16
22
32
MCH064
assorted tools and bit
holders for lathe,
shaper, slotter
& planner in different shapes
and sizes
0
33
MOT033
auto electrical test
bench
digital panel meter 0-200 volts
digital panel meter 0-200 amps
fixed 12/24 v field supply
3
Page | 69
alternator fault light 12/24 v
starter test free run (built-in d.c.
supply - no battery required)
built in a.c. voltage stabilizer
easy transportable bench top model
separate digital meters for
alternators
110 v series lamp for insulation test
full set of leads, maximum diameter
of device under test 175 mm
heavy duty fast mounting vice for
alternators & starters
34
DSL030
auto electrical test
bench 2 hp single phase
,220 v 15 amp 75
mp/12v 70 amp /24 v
drive 3 h. p. three phase
8
power supply 440v 15 amp
alt. load 130 amp-12v & 80 amp-24v
starter test built-in d. c. supply, builtin a. c. voltage stabilizer
35
MOT231
automotive exhaust
5 gas analyzer (petrol & diesel) or
diesel smoke meter
3
36
CAR041
ball pein hammer
600 grs.
4
37
MCH076
base chuck for slotter
stander
1
38
ELE085
battery charger
0-12 v dc
35
39
MOT034
battery –charger
output voltage 12 v
end voltage 14.4 v
automatic cut off
dimensions 26 x 26 x 16 (cms)
material: metal cabinet
4
40
DSL031
battery -charger 30-180
ah cop.
12v/24v
7
41
ELE038
bearing puller
pulley puller - 3 jaw industrial
reversible double ended adjustable
manufactured from drop forged size 12 "
62
42
MOT035
belt tensioner gauge
properly check drive belt tension on
drive belts to ensure maximum belt
and bearing life
scale reads 30-180 inch pounds
handy universal belt tension gauge
and the otc family of belt tensioning
tools
4
43
MOT232
bench lever shears
250mm blade x 3mm capacity
4
44
MCH121
bevel gauge
200 mm
2
45
SEWT015
blanket for padding of
briwen e 10 th/bleser e 10 th
10
Page | 70
pressing table
46
MOT036,
DSL033
blow lamp
1 litre capacity
16
47
FIT063,
ELE023
blow lamp 0.50 liters
blow lamp capacity 0.5 liter - brass
body
47
48
TUR111
bore dial gauge stems –
12 to 35 mm, 35 to 65 mm., dial
gaugeindicator of 0.01 accuracy.
3
49
TUR078
boring tool holder for
6 mm sq. tool bit
3
50
DMC001
box drawing instrument
containing one 15 cm
compass with pinpoint,
pin point & lengthening
bar, one pair spring
bows, rotating compass
with interchangeable
ink and pencil points,
drawing penswith plain
point & cross point,
screw driver and box
ofleads.
(0.2,0.3,0.4 mm).
78
51
FIT067
box spanner set 6-25
mm set of 8 with tommy
bar.
box spanner set 6 x 7 to 20 x 22 mm
set of 8 with tommy bar
12
52
ELE018
bradawl
bradawl - for starting screw holes,
bradawl of size 150mm x 6mm square
pointed with pvc handle
482
53
ELE099
brake test arrangement
with two spring balance
0 to 25 kg rating
brake test arrangement with two
spring balance 0 to 25 kg rating
29
54
CAR060
breast drill
6 mm.capacity
2
55
CAR038
cabinet screper
100 mm.
4
56
SEWT035
calculator desk type
acordiy comprites
4
57
DMC014
calculator scientific
(non-programmable)
6
58
FIT004
caliper 15 cm
hermaphrodite
material -medium carbon steel,
point -hard and tempered, lenghe
from point to joint 15cm ,springh
jont
188
59
FIT003,
MOT037,
DSL002,
MOT002,
caliper inside 15 cm
spring.
material -medium carbon steel,point
hard and tempered ,length from
point to joint 15cm ,spring joint
246
Page | 71
DSL034,
MCH003
60
MCH023
caliper inside spring
200 mm, material -medium carbon
steel,point hard and tempered
,length from point to joint 15cm
,spring joint
1
61
TUR002
caliper inside spring
joint
150 mm, material -medium carbon
steel,point hard and tempered
,length from point to joint 15cm
,spring joint
26
62
TUR003
caliper odd-leg firm
joint
150 mm, material -medium carbon
steel,point hard and tempered
,length from point to joint 150 mm
,firm joint
26
63
FIT005,
TUR001,
MOT038,
DSL003,
DSL035,
MOT003
caliper outside 150 mm
spring
150 mm materrial- mediam carbon
steel, point-hard and
tempered,length from point to joint
150 mm , spring joint
284
64
MCH021
caliper outside spring
200 mm
0
65
MCH002
caliper outside spring
150 mm
10
66
TUR034
caliper transfer inside
150 mm
5
67
MOT039,
DSL036
car jet washer with
standard accessories
10m,vertical type, voltage (by areas)
- single-phase ac 50/60hz,voltage
220v to 240v,power input 1,600w,max. discharge pressure
9.0mpa (1mpa: 10.2 kgf/cm2)
10
68
FIT145
carbide wear block 1
mm – 2 mm.
cabide wear block 1 mm - 2 mm made
up of tungsten carbide
19
69
MOT040
carburetor
solex, mikuny for dismantling and
assembling
3
70
MOT041
carburetor repair tool
kit
4 piece tool kit
contains all tools need to work on
most small 2 cycle carburetors
spline style tool, d style tool, double
d style tool, pacman style tool
made from high quality materials for
long lasting durability.
comes in a box.
2
71
CAR051
card file (steel)
8" length
4
72
FIT057
card file.15 cm x 5 cm x
card file best quality
72
Page | 72
2.5 cm
73
CAR005
carpenter marking
gauge
150 mm
11
74
CAR006
carpenter mortice gauge
200 mm
20
75
CAR003
carpenter square
200 mm
20
76
CAR074
carpenter vice
250 mm jaws.
12
77
CAR081
carpenter’s work bench
2400x920x800 mm. height
4
78
CAR076
carving tools set.
set of 6
4
79
SUR005
celluloid set square
45˚ & 60˚
42
80
DSL004,
MOT004
center punch.
10 mm. dia. x 100 mm
82
81
CAR056
centre bits
6,8,10,12.
2
82
TUR050
centre gauge com.
60°, 55° and 29°
4
83
CAR061,
FLT008,
MCH006,
TUR007
centre punch
5 punch
258
84
MOT042
chain pulley
block-3 ton capacity with tripod
stand
2
85
DSL037
chain pulley block-3 ton
capacity with tripod
stand
3 ton tripostand
12
86
FIT189
chipping hammer.
chipping hammer with metal handle
and weight of 250 grams,made of
mild steel both ends must be hard and
tempered
20
87
MOT043,
DSL038
chisel 10 cm flat
10 cm flat, made up of high carbon
steel - high quality with a gronund
cutting edge in flat for cutting cold
metals
226
88
ELE027
chisel 25 mm and 6 mm
chisel cold flat - high quality with a
ground cutting edge in flat for cutting
cold metals and brickwork , size length 150 mm cutting edge 16 mm .
62
89
FIT079
chisel cold 19 mm flat
chisel cold 19 mm flat ,size-20x200mm
72
Page | 73
90
FIT078
chisel cold 9 mm cross
cut 9 mm diamond.
chisel cold 9 mm cross cut 9 mm
diamond overall length 135mm, mat.high carbon steel
104
91
FIT080
chisel cold 9 mm round
ze.
chisel cold 9 mm round noze,overall
length 135mm
76
92
ELE026
chisel cold firmer 25
mm x 200 mm
chisel cold flat -made up of high
carbon steel , high quality with a
ground cutting edge in flat for cutting
cold metals and brickwork , size - 25
mm x 200 mm .
58
93
ELE044
chisel cold flat 12 mm
wire steripper size - 20cm , handle pvc 60
coted
94
TUR018
chisel cold flat 20 x 150
mm
20 x 150 mm
6
95
SUR009
chisel- steel
80 mm blade
30
96
CAR011
chisel, firmer (bevel)
edge 6 mm. 10,15,20 and 25
mm.width
5
97
CAR012
chisel, mortice
06,10,15 mm.
8
98
MOT044,
chisels cross cut
DSL039DSL039
200 mm x 6mm
58
99
MOT045,
DSL040
circlip pliers expanding
and contracting type
15cm and 20cm each
31
100 FIT070
clamp “c” 5 cm
clamp "c" 5 cm jaw gap
18
101 ELE021
clamp 200 mm, 150 mm
and 100 mm
c- clamp - specialist clamp from drop
forged steel,with extra throat depth
for clamping work pieces further in
from the edges, allowing a greater
range of applications , size - 200 mm,
150 mm and 100 mm set of 3 pes.
56
102 FIT069
clamp toolmaker 5 cm
and 7.5 cm set of 2.
toolmakers clamps hardened and
tempered jaws ,length of parallel
block (5 & 7.5 cm)
with spring tension clips. set of two
22
103 MCH048,
MOT046,
DSL041,
FIT071
clamps c
c- clamp - specialist clamp from
drop forged steel,with extra throat
depth for clamping work pieces
further in from the edges, allowing a
greater range of applications , 100
mm
39
Page | 74
104 MOT047,
DSL042
clamps c
c- clamp - specialist clamp from
drop forged steel,with extra throat
depth for clamping work pieces
further in from the edges, allowing a
greater range of applications ,
150mm
22
105 MCH049,
DSL043,
MOT048
clamps c
c- clamp - specialist clamp from
drop forged steel,with extra throat
depth for clamping work pieces
further in from the edges, allowing a
greater range of applications , 200
mm
24
106 CAR015
claw hammer
500 grm.
12
107 MOT049,
DSL047
cleaning tray
45x30 cm.
22
108 MOT050
coil spring compressor
for suspension spring
autoolusa 10 strut coil spring shock
compressor. even if you have a small
home shop, you can perform
suspension work on macpherson
struts, found on many modern
domestic and imported vehicles.
4
109 ITE024
cold chisel flat
20mm
2
110 MCH008
cold chisel flat
25 x 200 mm
26
111 FIT120
cold set rodded
25x200mm.
cold set rodded 25x200mm.,cold set
rodded 1.36kg ,made up of medium
carbon steel
17
112 TUR109
combination drill
112 pcs drill machine & screwdriver
set combo
4
113 TUR085
combination drill
a-2.5 and a-1
8
114 MCH013
combination plier 150
mm
pvc insulated pliers flat nose - polished 28
head drop forged from carbon steel
,hardened and tempered , flat
serrated jaws from grip , size -150 mm
,
115 FIT082,
TUR029
combination set 300
mm
combination set lngth of blade 300
mm - fully hardened and ground
datum faces to resist wear.centrally
mounted protractor vial allows
unrestricted viewing .precision rules
with deeply etched graduations on
both sides for ease of reading and long
life.protractor has full 360* scale plate
,graduated 0-180* -0,includes
24
Page | 75
vial,square head offers the following
fixed angles : 45* and 90* centre head
offers a fixed 90* angle,for finding the
centre of round bar stock up to 120
mm diameter.
116 MCH119
combination set with
300 mm rule
4
117 CAR063
combination side cutting
pliers.
6" length
2
118 CAR091
combind surfacer and
thickner.
raye 200 to 600 mm thic 250 ml
1
119 FIT170
comparators stand with
dial indicator lc
0.01mm.
comparators stand with dial test
indicator plunger type l.c. 0.01 mm.
12
120 CAR029
compass saw
350 mm.
4
121 MOT051
compression testing
gauge suitable for diesel
engine with standard
accessories
works on any diesel engine
test compression up to 1000 psi and
7000 kpa
include a check valve push button
compression release and a quick
disconnect fitting on the hose end
straight and 45 degree hose
connectors are included
determination of damage by impact
tools is subject to spx evaluation and
discretion
4
122 MCH107
concave milling cutter
ø 63 x 6 radius x ø 27 mm
1
123 DSL047,
MOT052
connecting rod
alignment fixture
merneel ment for all type eingines of
comnectihy
17
124 ITE001
connecting screwdriver
100 mmalloy steel, handle
transparent cellulose acetate
42
125 ELE094
contactor & auxiliary
contacts 3 phase
440volt,16amp
contactor 3 phase 440 volt, 16 amp 2
no & 2 nc auxiliary contacts.
31
126 ELE095
contactor & auxiliary
contacts 3 phase
440volt,32amp
contactor 3 phase 440 volts 32 amp 2
no. & 2 nc cauxiliary contacts
31
127 ITE022
continuity tester
original continuity tester for
checking wire and power cable
2
128 CAR019
contruction scale
1 meter
4
129 MCH108
convex milling cutter
ø 63 x 6 radius x ø 27 mm
1
Page | 76
130 ELE067,
MOT054,
DSL048
copper bit soldering
iron 0.25 kg.
copper bit soldering iron 0.25 kg.
79
131 CAR059
counter sink bit rose
type
12 mm.
4
132 ELE042
crimping tool
scissors blade 150 mm , handle pvc
insulated, made up of stainless steel
61
133 ITE012
crimping tool (pliers)
stanley crimping plier, 84-223-22,
size: 225 mm/9 inch
12
134 DSL092
crimping up to 10mm
fit stud diameter :
8mm/5/16";connecting hole :
9.5mm/0.37"
tip width : 18mm/0.7";total length :
43mm/1.7"
material : copper;main color : silver
tone
weight : 127g;package content : 10 x
tin plated copper lug
2
135 CAR026
cross cut saw
300mm blade
2
136 CAR042
cross pein hammer
0.6 kg with handle
4
137 MOT055
cut section model
mock layout of a motor car –
electrical system working model
3
138 MOT056
cut section models of
shock absorbers
cut section models of shock
absorbers For LMV
2
139 MOT058
cut section working
model
cut section working model of
automatic transmission gear box
For LMV
2
140 MOT059
cut section working
model
cut section working model of
centrifugal clutch assembly. For LMV
3
141 MOT060
cut section working
model
cut section working model of
diaphragm clutch assembly. For
LMV
3
142 MOT061
cut section working
model
cut section working model of single
plate clutch assembly. For LMV
3
143 DSL049
cylinder bore dial gauge
20 to 160 mm 10"deep2"-6"
14
144 MOT062
cylinder bore gauge
capacity
20 to 160 mm
8
145 MOT063
cylinder liner-
dry & wet liner, press fit & slidefit
liner
3
Page | 77
146 DSL050
cylinder liner- dry & wet
liner, press fit & slidefit
liner
lcv.hcv fasi
8
147 MCH082
cylindrical cutter
63 x 90 bore dia
0
148 MCH083
cylindrical cutter
80 x 90 bore dia.
0
149 MCH158
cylindrical grinder
max. grinding length 300 mm
height of centre 130 mm
max. distance between centers 340
mm
2
150 ELE075
d.c. milli ammeter 0 500m a
d.c. milliammeter 0 -500m a, moving
coil type,analog with case box
25
151 ELE054
d.e. metric spanner 6-32
mm
spanner d.e.drop forged carbon steel
metric standard set size - 6 x 7, 8 x 9,
10 x 11, 12 x 13, 14 x 15, 16 x 17, 18
x19, 20 x 22, set of 8 pcs.
65
152 DSL051,
MOT064
dc ohmmeter
0 to 300 ohms, mid scales at 20
ohms
36
153 MOT066
demonstration board
demonstration board of electronic
ignition system, ignition coil
4
154 MOT065
demonstration board of
2w ignition system,
ignition coil
2w ignition system, ignition coil
4
155 TUR041
depth gauge micrometer
0 to 150 mm reading 0.01 mm
6
156 DSL052,
MOT068
depth micrometer
0-25mm
43
157 FIT167
depth micrometer 0-25
mm. 0.01 mm.
0 - 150mm with extension rod digital
depth gauge
easy handling with inch/metric
measurement, large digital display.
external readings with zero set at any
point fitted with a thumb wheel for
greater accuracy.
12
158 ELE068
desoldering gun
material:aluminum alloy + plastic
98
features:allows you to fix projects with
precision and speed; easy to use with
adjustable temperature dial
application:suitable for industry, car
mending, home and company use
power supply:us plug (220v)
other:power: 30w
packing list:1 x soldering iron (110cm)
1 x soldering mouth
Page | 78
1 x pin
dimensions: 10.55 in x 1.06 in x 1.06 in
(26.8 cm x 2.7 cm x 2.7 cm)
weight: 5.29 oz (150 g)
159 MOT069
dial gauge type 1 gr. a
(complete with
clamping devices and
with magnetic stand)
cylinder bore gauge capacity 20 to
16
160 mm, depth micromete r 025mm, dial gauge type 1 gr. a
(complete with clamping devices
and with magnetic stand), feeler
gauge 20 blades (metric), granite
surface plate 1600 x 1000 with stand
and cover, outside micromete r 0 to
25 mm, straightedge gauge 2 ft.,
surface gauge with dial test indicator
plunger type i.e. 0.01 mm, telescope
gauge, thread pitch gauge metric,
bsw, vernier caliper 0- 300 mm with
least count 0.02mm, wire gauge
(metric), taps and dies complete sets
bsf, taps and wrenches – metri for
mmv trade
160 TUR053
dial test indicator
0.01 mm with magnetic base
2
161 FIT149
dial test indicator .01
mm on stand
dial gauges easy read dial gauges
plunger type 58mm (21/4”) diameter
dial
matt finish chromed housings
and black oxidised limit hands.
shockproof
mechanism. fitted with 1/4” inside
diameter stem.
manufactured to bs 907. 0.01mm
universal 2 mag stand lever type, two
magnetic
faces and large vee. with universal
clamp.
mounts: 1/4” i/d lug, stem/spigot
diameter: 1/8”, 1/4”.
base dimensions: 60 x 65 x 55mm.
column height x diameter: 175 x
12mm.
crossbar length x diameter: 160 x
10.0mm.
magnetic pull: 50kg.
9
162 MCH124
dial test indicator with
magnetic gauge type 1
grade a with magnetic
base
1 grade a with magnetic base
3
163 FIT164
dial vernier caliper 0 –
200 mm lco 0.05 mm.
dial calipers
rack covers prevent dust from fouling
teeth of racks. all measuring faces are
8
Page | 79
(universal type).
precision ground and micro
lapped for absolute inside, outside,
depth and step readings.
range : 200mm
graduation (reading) : .05mm
164 TUR043
dial vernier caliper with
metric
200 mm reading 0.05 mm
7
165 TUR123
digimatic electronic
outside micrometer
(0 to 25 mm & 25 to 50 mm) lc 0.001
mm.
3
166 TUR122
digimatic electronic
vernier caliper inch and
mm
8”/200 mm. lcm 0.005”/0.001 mm
2
167 MCH114,
FIT169
digital micrometer
0-25 mm
16
168 MCH116
digital vernier caliper
0- 300 mm
3
169 FIT173
digital vernier caliper 0150 mm. l.c. 0.001
mm.(optional)
digital vernier caliper - 6 inch - 150
mm
range :0 - 150 mm - accuracy : +/0.02mm
large lcd display with mm and inch
display options
auto power on - function for quick
measurement
made of hardened stainless steel
12
170 ELE112
direct on line starter
starters for 2 to 5 h.p. a.c motors
direct on line starter
24
171 MCH115
direct reading vernier
caliper
0- 300 (direct reading with dial)
1
172 MCH109
disc type form milling
cutter
(involutes form -2 module, 20°
pressure
angle)
2
173 MOT072
disk brake with caliper
assembly
fixed calipers can have 2, 3, or 4
pistons. 2-piston calipers have one
piston on each side of the disc. each
piston has its own disc pad.
4
174 FIT006,
MCH005,
TUR009,
MOT074,
DSL005,
DSL0057,
MOT005
divider 150 mm spring
materrial- mediam carbon steel,
point-hard and tempered ,length
from point to joint 15cm , spring
joint
290
175 TUR081
dog carrier
235, 50 and 75 mm
6
Page | 80
176 ELE120
domestic appliances
appliances
24
177 FIT018
dot slot punch 10 cm.
high carbon steel dos slot punch
10cm
162
178 MCH093
double angle unequal
cutter
50 x 12 x 550
2
179 MCH094
double angle unequal
cutter
50 x 12 x 600
2
180 MCH095
double angle unequal
cutter
50 x 12 x 700
2
181 MCH096
double angle unequal
cutter
50 x 12 x 750
1
182 DMM001
draughtsman drawing
instrument box
containing compasses with pencil
point, point driver,
interchangeable,divider pen point
interchangeable, divider spring bow,
pen spring bow lengthening bar, pen
drawing liner, screw driver
instrument, tube with lead.
2
183 DMM003
draughtsman stool
wooden
tap 1.5x1.5x2.5x hf
5
184 SUR021
drawing board
1250mmx900mm with stand
32
185 MOT075,
DSL058
drift punch copper
15 cm
32
186 MCH044
drill chuck
0.20 with taper shank
1
187 FIT093
drill chuck 12 mm.
drill chuck 12 mm, with arbor
10
188 MCH051
drill h.s.s. taper shank
(6 mm to 12 mm in step of 0.5 mm)
0
189 ELE055
drill hand brace
drill hand brace size - 0 to 10 mm
110
190 MOT076
drill point angle gauge
29 size drill bit gauge bolt wire
diameter index sae heavy duty metal
4
191 ELE056
drill s.s. twist block 2
mm, 5 mm 6 mm set of 3
high speed steel parallel shank twist
drills size - 2 mm, 5 mm, 6 mm ,set of
3 pes.
126
192 MOT077,
DSL060
drill twist
1.5 mm to 15 mm (various sizes) by
0.5 mm
35
193 FIT034
drill twist straight shank
1.5 to 12 mm by 0.5 mm
drill twist straight shank 1 mm to 15 10
by 0.5 mm , 25 pcs . set contents mm
- 1.0 , 1.5 , 2.0, 2.5 , 3.0 , 3.5 , 4.0 , 4.5 ,
5.0 , 5.5 , 6.0 , 6.5 , 7.0 , 7.5 , 8.0 , 8.5 ,
Page | 81
9.0 , 9.5 , 10.0 , 10.5 , 11.0 , 11.5 ,
12.0 , 12.5 , 13.0,13.5,14,14.5,15
supplied in indexing metal cases .
made up of high speed steel
194 FIT035
drill twist straight shank
8 mm to 15 mm by ½
mm
drill twist straight shank size - 8 mm
to 15 mm by .5 mm
a) 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12,
12.5, 13, 13.5, 14, 14.5, 15 set of 15
pcs.
b) 8 mm, 9 mm, 10 mm, 11 mm, 12
mm, 13 mm, 14 mm, 15 mm set of 8
pcs.
12
195 FIT092
drill twist taper shank
12 mm to 25 mm x 1.5.
drill twist t/s size - 6 mm to 25 mm x
1.5 size 6, 7.5, 9, 10.5, 12, 13.5,15,
16.5, 18, 19.5, 21, 22.5, 24, 25.5 set of
14 pcs.madeup of hss
12
196 CAR101
drills chuck
12 mm capacities.
1
197 MOT078,
drum brake assembly
ezgo 21807g1m brake drum/hub4lug (gas)
1
198 MOT237
dual magnetization yoke
:
ac / hwdc, 230 vac, 50hz
4
199 SEWT036
dummy lady , men ,kid
full size
2
200 FIT182
earth clamps.
150 mm
22
201 SEWT025
electric automatic steam
press
650 watt philips
15
202 CAR104
electric heater
1000/1500 w 1 nos.102. electric
blower (pertable)
1
203 ELE121
electric hot plate 1500
watt
electric hot plate 1500 watt ,250v
27
204 ELE123
electric iron 1500 watts
electric iron 1500 watts,250v - non
stick teflon coated sole plate
,adjustable temprature control , steam
function , thermostat on/ off
/indicator light .
31
205 ELE122
electric kettle 1500
watts
electric kettle, 1500 watts,250v
26
206 MOT079,
DSL061
electric soldering iron
230 v 60 watts 230 v 25 watts
19
207 MOT080
electric testing screw
driver
direct detection 12v-220v ac/dc live
objects
rapid induction voltage testing and
16
Page | 82
led display
ce certification by european
commissio
208 ELE006
electrician connector,
screw driver insulated
100 mm 150 mm 200
mm insulated
blade size 6 x 100mm slotted head
with tip dimension 6 x 0.6 mm ,
blade alloy steel, handle transparent
cellulose acetate
504
209 MOT006,
DSL006
electrician screw driver
250mm
58
210 ELE009
electrician screw driver
thin stem insulated 100
mm 150 mm 200 mm
insulated
size- 8 x 100 mm, tip size4.0x6.0mm, with pvc insulation
493
211 DSL063,
MOT081
engineer’s square
15 cm. blade
30
212 FIT171
engineer’s try square
(knife-edge) 150 mm
blade.
try square engineering - from
hardended and tempered steel the
edges are ground parallel to give the
square an exact right angle on both
the inside and outside of the stock and
blade . size -150 mm
12
213 MCH012
engineers screw driver
300 mm
38
214 DSL064,
MOT082
engineers stethoscope
for all type automobiles engines,
frame size : 20 x 13 x 0.6cm/7.9" x
5.1" x 0.24"(l*w*max.t)
tube size : 0.85 x 35cm/ 0.33" x
14"(d*l);head dia : 3.3cm/ 1.3"
weight : 165g
package content : 1 x mechanics
stethoscope ,1 x bugle head
22
215 MCH090
equal angle cutter
450/100
0
216 MCH091
equal angle cutter
600/100
0
217 MCH092
equal angle cutter
900/100
1
218 MOT083
executive auto electrical
tool kit
hand tools, auto tools
219 CAR057
expansion bit sets.
2 mm to 12 mm
2
220 DMM007
external storage device
(8 gb )
4
221 SEWT032
feed off the arm double
needle
double needle
3
222 MCH132
feeler gauge
32 mm blage
1
5
Page | 83
223 MOT084,
DSL065
feeler gauge
20 blades (metric)
25
224 TUR048
feeler gauge
100 mm blade metric set
2
225 FIT047
feeler gauge 10 blades
feeler gauges 10 blades metric - 0.05
,0.10, 0.15 , 0.20 , 0.30 , 0.40 , 0.50 ,
0.60 , 0.70 , and 0.80 mm.
quality industrial with hardened and
polished taper
blades, enclosed in a steel case.
blades are clearly
marked for easy identification.
11
226 FIT041
file cut saw 15 cm
smooth
file knife edge 15 cm smooth made
from high carbon steel
44
227 FIT042
file feather edge 15 cm
smooth
file feather edge 15 cm smooth hcs
24
228 ELE062
file flat 150 mm rough
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 150 mm rough .
118
229 ELE059,
DSL008,
MOT008
file flat 200 mm 2nd cut
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 200 mm 2nd cut .
319
230 FIT050,
DSL066,
MOT085
file flat 200 mm bastard
double cut teeth for rapid metal
removalfile flat bastard 200 mm
second cut made from high carbon
steel
90
231 ELE063,
TUR022
file flat 250 mm bastard
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 250 mm bastard .
126
232 ELE064,
FIT014
file flat 250 mm smooth
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 250 mm smooth .
315
233 FIT013,
file flat 250 mm. second
made up of tool steel/high carbon
209
Page | 84
MCH010
cut
steel file flat 250 mm .secound cut files suitable for filing and deburring
on a wide variety of materials .
double cut teeth for rapid metal
removal.
234 FIT051,
MCH009
file flat 300 mm bastard.
double cut teeth for rapid metal
removal. file flat 300 mm bastard
second cut made from high carbon
steel
99
235 FIT049
file flat 300 mm second
cut.
double cut teeth for rapid metal
removal file flat 300 mm second cut
made from high carbon steel
59
236 MCH011,
MCH053
file flat smooth 200 mm
smooth
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 200 mm smooth .
46
237 FIT053,
CAR047,
MCH054
file half round 250 mm
second cut.
file half round 25 cm second cut
made from high carbon steel double
cut
78
238 TUR026,
FIT015
file half round 150 mm
2nd cut
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 150 mm 2nd cut .
256
239 ELE060
file half round 200 mm
2nd cut
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file half round 200 mm 2nd cut
.
140
240 FIT054
file half round 250 mm
bastard.
files suitable for filing and deburring 32
on a wide variety of materials.double
cut teeth for rapid metal removal.
file half round 250 mm bastard
made from high carbon steel
241 FIT056
file hand 150 mm
second cut.
files suitable for filing and deburring
on a wide variety of materials;made
up of high carbon steel.double cut
teeth for rapid metal removal file
hand 150 mm second cut made
frowith wooden / plastic handle
88
Page | 85
242 FIT040
file knife edge 150 mm
smooth
double cut teeth for rapid metal
removal.file knife edge 150 mm
smooth made from high carbon steel
36
243 ELE065
file rasp, half round 200
mm bastard
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file rasp, half round 200
bastard .
112
244 FIT044,
ELE061
file round 200 mm
second cut
double cut teeth for rapid metal
removal file round 200 mm second
cut made from high carbon steel
190
245 TUR025
file round 250 mm 2nd
cut
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file round 250 mm 2nd cut .
6
246 FIT055
file round 30 cm
bastard.
files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal. file round 30 cm
bastard made from high carbon
steel
45
247 CAR049
file slim taper
100 mm
12
248 CAR050
file slim taper
150 mm.
12
249 FIT045
file square 150 mm
second cut
double cut teeth for rapid metal
removal.file square 150 mm second
cut made from high carbon steel
32
250 FIT046,
MCH057
file square 250 mm
second cut
double cut teeth for rapid metal
removal file square 250 mm second
cutmade from high carbon steel
40
251 FIT052
file swiss type needle set
of 12.
file swiss type needle set of 12. made
from high carbon steel
17
252 FIT043
file triangular 150 mm
smooth
double cut teeth for rapid metal
remova file triangular 150 mm
second cut made from high carbon
steel
20
253 FIT048
file triangular 200 mm
second cut.
double cut teeth for rapid metal
removal.file triangular 200
mmsecond cut made from high
carbon steel
80
Page | 86
254 MCH055
file triangular smooth
200 mm second cut
double cut teeth for metal removal
file triangular 200 mm second cut
made from high carbon steel
4
255 FIT039
file warding 150 mm
smooth
double cut teeth for metal removal.
file warding 150 mm smooth made
from high carbon steel
34
256 MOT086,
DSL067
file, half round 200 mm
2nd cut
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 200 mm 2nd cut .
29
257 MOT087,
DSL068
file, square 200
mmsecond cut
double cut teeth for rapid metal
removal.file square 200 mm second
cut made from high carbon steel
34
258 MOT088,
DSL069
file, square 300 mm
second cut
double cut teeth for rapid metal
removal.file square 300 mm second
cut made from high carbon steel
31
259 MOT089,
DSL070
file, triangular 150 mm
second cut
double cut teeth for rapid metal
remova file triangular 150 mm
second cut made from high carbon
steel
33
260 DSL071
files assorted
sizes and types including safe edge
file (20 nos) all types & heedle files
150 mm size + sate edge file
18
261 ELE090,
CAR112,
FIT111
fire buckets 10 litre
fire buckets made up of iron with
stand ,10lt. capacity,weight aprox 2kg
87
262 MOT091
flat file 250 mm 2nd cut
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 250 mm 2nd cut .
7
263 DSL072
flat file 250 mm bastard
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
metal removal.ideal for workshop or
garage file flat 250 mm bastard .
15
264 MOT092,
DSL073
flat file 350 mm bastard
made up of tool steel/high carbon
steel, files suitable for filing and
deburring on a wide variety of
materials.double cut teeth for rapid
24
Page | 87
metal removal.ideal for workshop or
garage file flat 350 mm bastard .
265 FIT124
flatters (rodded) 55 mm
square.
flatters (rodded) 55 mm square cast
steel
15
266 DMC011
flexible curves
80 cm long
13
267 CAR001
foot rule /steel rule
( two ft. four fold ) steel rule
20
268 SEWT006
french curve
set of six
16
269 DMC010
french curves
transparent plastic set of 12
12
270 CAR028
fret saw frame
150 mm.
2
271 MOT093
front axle
( rzeeppa joint) with stand for
dismantling and assembly
3
272 MOT094,
DSL074
fuel feed pump for diesel murphy high pressure diesel fuel
shutoff valve 24 vdc 1/4 in. diameter
- sv-24-hp
6
273 DSL075
fuel injection pump
(diesel) inline for 6 cylinder engines
7
274 MOT096
fuel injection pump
dismantling tool kit
/universal vice
dismantling tool kit /universal vice,
grease gun, grease gun heavy duty
trolley type 10 kg capciaty, injector
cleaning unit, injector testing set
(hand tester),
3
275 MOT097,
DSL077
fuel injection pump, ve
pump / distributor fuel
rotary pump (dpc)
pumps / along with
special tools and
accessories.
no. of cylinders : 12
drive : ac frequency / electronic
drive
main motor : 15 hp / 20 hp (as per
customer requirement).
rpm : variable from 0 – 5000 rpm
pressure gauges : digital and analog.
fuel supply motor : 1.5 hp
comes fitted with all pressure
gauges and necessary standard
accessories. also some special
accessories are available at an extra
cost. (for list of standard and special
accessories please refer the test
bench data word file attached here)
power supply : customizable
according to customer requirement.
color : choice of two colors
available:a. green with black trim (as in
picture above)
b. blue with white trim
12
276 FIT125
fuller top & bottom 6
fuller top & bottom (pair) 6 mm 9 mm
22
Page | 88
mm 9 mm (pair).
277 CAR068
g clamp
100. mm
8
278 CAR069
g clamp
150 mm.
4
279 CAR070
g clamp
250 mm.
4
280 SEWT012
garment hangers
metal type
68
281 FIT187
gas lighter.
frame made of steel,flint stone
24
282 CAR039
gauge chisel, firmer
6,10,12,16,20,mm
4
283 CAR040
gauge chisel, scribing
6,10,12,16,20,mm.
4
284 FIT143
gauge imperial sheet.
standard wire gauges high grade tool
steel with satin brushed finish. each
slot is marked with the
nominal size. two part pivoting space
saving design.
range of sizes : 0.2 - 10.0mm
11
285 FIT147
gauge plug single 3
ended 5 to 55 by 5 mm.
set of 11 pcs.
gauge plug single 3 ended 5 to 55 by 5
mm set of 11 pcs made up of tungsten
carbide
9
286 FIT146
gauge snap go and t go
25 to 50 mm by 5mm.
set of 6 pcs.
gauge single ended snap go and not
go 25 to 50 mm by 5 mm set of 6
pcs.made up of tungsten carbide
9
287 FIT148
gauge telescopic upto
150 mm.
telescopic gauges range of sizes - 8 150mm - with knurled satin finish
bodies
providing positive adjustment of the
hardened and radius ground plungers
ensuring accurate measurement of
the internal diameter when used with
a micrometer. for smaller diameter
measurements use the small hole
gauge.
7
288 ELE058
gauge, wire imperial
gauge, wire imperial - from high grade
tool steel with satin brushed finish
range of size- 1- 36 swg .
82
289 DMC008
geometrical
(wooden/plastic
models(wooden/plastic)
as per given below:
59
290 ELE126
geyser (storage type) 15
ltr minimum
geyser (storage type) 15 ltr minimum
,1500watt,250v
29
291 ELE017
gimlet 6 mm.
gimlet 6 mm - self starting screw point
570
Page | 89
dedigned for producing holes without
the risk of splitting surface'with spiral
fluted .overall length 250mm to 300
mm
292 CAR078
glass cutter.
daymand point
2
293 FIT068
glass magnifying 7 cm
glass magnifying 7 cm dia. 16x
zooming capacity
22
294 FIT190,
DSL079,
MOT101
gloves (leather)
leather hand gloves 14” must be in
pairs, stitching on the inside
53
295 DSL080,
MOT102
glow plug tester
each one requires 5 amperes,
19
296 CAR077
goggles pair.
genral pair
2
297 MOT103,
DSL081
granite surface plate
1600 x 1000 with stand and cover
10
298 ELE033
grease gun
metal oil cans enamel finish, heavy
gauge, seamless
metal bodied oil cans. with positive
force
feed brass pumps and valves. supplied
with both rigid metal and flexible
nylon threaded
spouts. capcity-0.12ltr
32
299 DSL082,
CAR106
grease gun hand
operater
0.5 kg hand operater
4
300 MOT104,
DSL065
grease gun heavy duty
trolley type
heavy duty trolley type 10 kg
capciaty
13
301 MCH047,
MCH046
grinding wheel dresser
huntington type
3
302 ELE092,
MOT106,
DSL084
growler
growler, for testing armature winding,
12v/24v and 500volt
55
303 TUR020
hacksaw fixed
200 mm (pistol grip)
12
304 ELE047,
MOT107,
DSL085
hacksaw frame 200 mm
300 mm adjustable
hacksaw frame -adjustable tubular
with long handle light weight. 200
mm, 300 mm . set of 2
132
305 FIT016
hacksaw frame fixed 30
cm..
hacksaw frame fixed 300 mm. with
long handle made of hard drawan
219
Page | 90
mild steel
306 MCH007,
ELE016
hammer ball pein 0.5
kg. with handle.
hammer ball peen 0.5 kg - with
wooden handle from finest qualits
drop foged steel ,hardened and
tempered with ground and polished
heads .
537
307 DSL086,
MOT108,
DSL007,
MOT007
hammer ball pein 0.75
kg. with handle.
hammer ball peen 0.75 kg - with
wooden handle from finest qualits
drop foged steel ,hardened and
tempered with ground and polished
heads .
75
308 FIT012
hammer ball peen 0.22
kg. with handle.
hammer ball peen0.22 kg. - with
wooden handle from finest qualits
drop foged steel ,hardened and
tempered with ground and polished
heads .
211
309 TUR006
hammer ball peen 0.25
kg. with handle.
hammer ball peen 0.25 kg - with
wooden handle from finest qualits
drop foged steel ,hardened and
tempered with ground and polished
heads .
20
310 FIT011
hammer ball peen 0.45
kg. with handle
hammer ball pein .45 kg-with
wooden handle from finest quality
drop foged steel ,hardened and
tempered with ground and polished
heads
193
311 MOT110,
DSL088
hammer copper
1 kg with handle
32
312 TUR019
hammer copper/brass
500 gm with handle
25
313 ELE046
hammer extractor type
0.40 kg
mallet hard wood - mallet/wooden
hammer with wooden handle, round
shape size - ø3" x 6" .
107
314 DSL090
hammer plastic
rawride
14
315 FIT116
hammer smith 2 kg.
with handle.
manufactured from finest quality drop
forged steel, hardened and tempered
with ground and polished
heads.hammer smith 2 kg with handle
18
316 ELE015
hammer, cross peen
with handle
manufactured from finest quality drop
forged steel, hardened and tempered
with ground and polished heads.
0.5kg
542
317 CAR055
hand auger
10,12,14,16,18,20,22,25 mm.
2
Page | 91
318 CAR017
hand brush for bench
cleaning
450 mm.
20
319 TUR095
hand chaser
m-12 & m-16 (internal )
1
320 CAR052
hand drill
6 mm. capacities
8
321 ELE028
hand drill machine
type- impact driver
26
reverse rotation -yes
chuck size -13 mm
no load speed- 0 - 3000 rpm
bpm range - 0 - 48000
maximum capacity in wood- 35 mm
maximum capacity in concrete- 13 mm
maximum capacity in steel- 13 mm
power consumption- 550 watts
power source- corded
voltage- 230 v
322 MCH081,
FIT114
hand hammer 1 kg. with
handle
1 kg.with wooden handle from finest
qualits drop foged steel ,hardened
and tempered with ground and
polished heads .
17
323 MOT113
hand operated crimping
tool
(i) for crimping up to 4mm and (ii)
for crimping up to 10mm
7
324 FIT072
hand reamer adjustable
cover max 9 ,12,18mm
– set of 3
hand reamer adjustable cover max
9.12.18mm-set of 3. made up of high
speed steel
10
325 FIT073
hand reamer taper 4 9mm set of 6 or 4 -7 mm
set of 4.
hand reamer taper 4-9 mm set of 6
made up of high speed steel
15
326 MOT114,
DSL093
hand reamers adjustable
10.5 to 11.25 mm, 11.25 to 12.75
mm, 12.75 to 14.25 mm and 14.25 to
15.75 mm
7
327 MOT115,
DSL095
hand shear universa
l 250mm
15
328 MOT116,
DSL096
hand vice
37 mm
9
329 ELE069
hand vice 50 mm jaw
material : body in gray cast iron with
hardened steel jaws 50mm
finish : epoxy coated, chrome plated
rod , weight 1200 gm
95
330 ELE007
handle thin stem 100
mm
100 mm
531
331 FIT133
hardle
1" shank hardie, medium carbon steel
18
Page | 92
332 MCH004
hermaphrodite caliper
150 mm
12
333 DSL097,
MOT117
hollow punch of seven
pieces set
6mm to 15mm
5
334 MOT118
horn and horn relay
horn relay - 12v
6
335 FIT121
hot set rodded
25x200mm.
hot set rodded 25x200mm.hot set
rodded 1.36kg made up of medium
carbon steel
11
336 MOT243
hydraulic jack hi-lift
type -
3 ton capacity, and 5 ton capacity
2
337 ELE086
hydrometer
hydrometer for testing specific gravity
of battery water ,fast and accurate
testing of bettry,easy to use.
factory calibreated and fully tested.
colour coded rod out
32
338 ELE109
hygrometer
digital hygrometer with in & out
temperature
additional features display in/out
temperature, humidity & time –all 4
simultaneously
memory of max & min measuring
value 2 hour / 24 hour displaying
system selectable c / f unit selectable
integral – hour alarm function
alarm function clock
desk – top placing @wall hanging
range: in temp. from -10 c to 50 c (14 f
to 122 f) with resolution of 0.1 deg c
(0.1 deg f)
out temp. from -50 to 70 deg c (-58 to
158 deg f) with resolution of 0.1 deg c
(0.1 deg f) humidity from 20% to
99% r.h with resolution of 1 % rh
display : 3 ½ digit, 0.5” lcd display
power supply: 1.5 v aaa battery x 1
housing : abs plastic case
dimensions : 106 x 98 x 22 mm
weight : approx. 160 gm
accuracy: +/- 1 c for temp.
+/- 5% r.h. for humidity
34
339 ELE124
immersion heater 1500
watt
d. immersion heater 1500 watt ,250v
28
340 MOT119
impact screw driver
impact screw driver set psf6 (pack of
6) flat slotted
7
341 MOT120,
injector
multi hole type, pintle type
12
Page | 93
DSL098
342 MOT121
injector cleaning unit
cleans injectors (carburetor jets),
fuel pipes or hoses, valves and
combustion chamber from deposits,
prevents further formation and
accumulations;
decreases negative effects after
using the high sulfur content fuel
and aromatic hydrocarbons;
improves fuel combustion and
enhance fuel economy;
improves fuel quality;
removes moisture from the fuel
system
2
343 MOT122
injector testing set
(hand tester)
3
344 ITE004
insulated combination
pliers
size : 210 mm / 8"
insulated with quality thick ca sleeve
ensures safe electrical working.
with joint cutter-printed bag
packing.
wire cutting ability for soft and hard
wires
linemans plier
42
345 FIT066
interchangeable ratchet
socket set with a 12 mm
driver, sized10-32 mm
set of 18 socket &
attachments.
interchangeable ratchet socket set
with a
12 mm driver size-10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 21, 22, 23, 24, 26,
27, 28, 29, 30, 32, accessories 1753,
1763, 1773, 1733, 1715, (20 socket +
5 accessories)
12
346 CAR027
key hole
saw 250 mm.
2
347 ELE012
knife double bladed
electrician
retractable - complete with 5 heavy
duty blades slimline die cast body
desingned to fit comfortabley in the
hand, with high carbon steel blades.
up to five spare blades can be stored
in the handle. overall length-160mm
505
348 ELE100
knife switch dpdt fitted
with fuse terminals 16
amp
knife switch dpdt fitted with fuse
terminals 16 amp,250 v
92
349 TUR027,
MCH078
knurling tool
revolving head (rough, med, fine)
diamond and
4
350 ELE079
laboratory type
induction coil
laboratary type induction coil 6 volt to
800-1000 volt
29
351 ELE025
ladel
ladle overall length 300mm , holding
30
Page | 94
capacity 200ml
352 FIT155
lathe tools bit 10 mm x
85mm.
lathe tools bit 10 mm x 100mm.hss
46
353 FIT153
lathe tools bit 6 mm x 75
mm.
lathe tools bit 6 mm x 75 mm.hss
44
354 FIT154
lathe tools bit 8 mm x 75
mm.
lathe tools bit 8 mm x 75 mm.hss
44
355 FIT152
lathe tools h.s.s. tipped
set.
lathe tools of hss with carbide tip
22
356 ECS071
lcd based dpm
3-1/2 digit lcd panel meter
item no. pm-228
30
357 FIT134, FIT191
leather apron.
leather apron best quality
44
358 MOT125,
DSL103
left cut snips
250mm
23
359 SEWT011
leg shaper – plastic
26 cm brass handle 12 "
49
360 SUR033
leveling staff - telescopic
type
gple3n nedo invar staff - length: 3m
30
361 MOT126,
DSL104
lifting jack screw type
3 ton, 5ton & 20 ton capacity
3
362 MCH129
limit plug gauges
5 mm to 25 mm by 2.5 mm
2
363 ELE096
limit switch
16 a-440 v
30
364 ELE098
load bank 5 kw( lamp /
heater type)
load bank-5kw(lamp/heater type) 34
lamp type.5kw.1ph , resistor/heater
type. 5kw.1ph
(b) load bank-5kw(lamp/heater type) lamp type .5 kw. 3ph , resistor / heater
type .5 k w .3 ph
365 SEWT033
locks for above pigeon
hole
steel looker godraze
366 ITE006
long nose pliers
150 mm material : chrome vanadium 42
steel / carbon steel
finish :chrome plated polished heads
/ burnished finish
367 FIT181
lungs for cable
lugs for cable
134
368 TUR102
machine chase
m-12to m-21 (std. series) to suit on
3
369 MCH068
machine vice
160 mm swivel base
2
48
Page | 95
370 TUR089,
FIT098
machine vice
100 mm jaw ( for drill machine ),
manufactured from the highest
quality castings with precision cut
screw mechanisms and precision
machined jaws. suitable for
workshop, automotive and
engineering use
opening (mm) : 100 (4")
jaw width (mm): 75 (3"), weight 1314kg
28
371 FIT099
machine vice 15 cm
engineer’s vice
manufactured from the highest quality
castings with precision cut screw
mechanisms and precision machined
jaws. suitable for workshop,
automotive and engineering use.
opening (mm) : 190 (7 1/2”)
jaw width (mm): 150 (6”) ,weight: 1518kg
6
372 TUR105
magnetic chuck
150 mm dia.( circular type )
4
373 MOT127
magneto spanner
set with 8 spanners
3
374 DSL106,
MCH134,
MOT128,
ITE021
magnifying glass
75mm
44
375 FIT136,
DSL089
mallet
mallet hard wood - mallet/wooden
hammer with wooden handle, round
shape size - ø3" x 6" .
33
376 ELE045
mallet hard wood 0.50
kg
chisel cold flat size - high quality with a 100
ground cutting edge in flat for cutting
cold metals and brickwork , size - 12
mm x 150 mm, made up of high
carbon steel
377 CAR014
mallet medium size
medium
20
378 CAR002
marking knife
200 mm. length
18
379 MCH017
marking off table
1200 x 1200 x 900 mm high
4
380 MOT129,
DSL107
marking out table
90x60x90 cm.
14
381 TUR013
marking table (ci)
120 x 120 cm
1
382 FIT023
marking table 91 x 91 x
122 cm.
markingh table 91×91×122 cm . gray
cast iron
11
Page | 96
383 CAR018,
SEWT001,
MOT180,
DSL155
measuring tape
3 meter
49
384 ELE093
megger 500 volts
analog type insulation tester (megger)
abs body,range 500 volt , 100 mega
ohm
26
385 ELE024
melting pot
temperature up to 300° c. enclosing
the eating block & controles which is
powder quoted with textured gray
finish . capacity 400ml
32
386 SUR054
metallic tape
20 m
20
387 SUR053
metallic tape
30 m
18
388 CAR083
meterial rack.
7"x3"
1
389 SUR034
metric chain-
30 m & 20 m
4
390 FIT083
micrometer 0 – 25 mm
outside.
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard,all supplied in a
impact resistant fitted plastic case.
range : 0 to 25 mm
least count : 0.01 mm
5
391 FIT084
micrometer 25 – 50 mm
outside.
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard , all supplied in a
impact resistant fitted plastic case.
range : 25 to 50 mm
least count : 0.01 mm
16
392 FIT085
micrometer 50 –75 mm
outside.
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard ,all supplied in a
impact resistant fitted plastic case.
range : 50 to 75
least count : 0.01 mm
11
393 MCH113
micrometer depth gauge
0-200 mm
2
394 FIT086
micrometer inside 25 50 mm with extension
rods.
micrometer inside 25 - 50 mm with
extension rods, sleeve 12mm,
extension rod 50-75mm, 75-100mm,
13
Page | 97
100-125mm, 125-150mm
395 TUR039
micrometer inside up to
25 mm reading 0.01 mm
6
396 TUR040
micrometer inside up to
50 to 150 mm reading 0.01 mm
1
397 TUR035
micrometer outside
0 to 1” reading 0.0001”
2
398 MCH110,
micrometer outside
0-25 mm
0
399 MCH111,
TUR037
micrometer outside
25-50 mm
6
400 MCH112,
TUR38
micrometer outside
50-75 mm
4
401 SHD001
microphone system
crystal microfone high inpidense
6
402 ELE087
miniature breaker 16
amp
mcb with box , singke pole , 16 amp ,
500 volt
31
403 ELE127
mixture & grinder
mixture & grinder - 6 jars , 4 functional 34
and 2 storage super extractor , seive ,
dome stirrer fruit filter , double oil seal
, cool touch chutney jar , hands - free
operation , cord winder power 500
watts
voltage 220-240v
404 CAR105
moisture meter
genral size
1
405 TUR061
morse taper plug & ring
gauge no.
0 to 7 mt
3
406 TUR064
morse taper sleeves no.
0-1, 1-2, 2-3, 3-4, 4-5.
1
407 CAR037
moulding plane set
10"
4
408 CAR079
nail punch.
genral
4
409 ELE013
neon tester230 v
neon tester 500v ,standard size-60mm
, and total length-125mm ,tip size
3.5mmx0.5mm
521
410 MCH042
number drills h.s.s.
(parallel shank)
1
411 CAR065
number punch
12 mm.
2
412 MOT132,
DSL109,
TUR080
oil can
0.5liter capacity
12
413 ELE032
oil can 0.12 ltr
0.12 liter capacity
28
Page | 98
414 FIT060
oil can 0.25 liters.
0.25 liter capacity
23
415 CAR082
oil can. 0.5 ltr
0.5 ltr capacity
4
416 DSL110
oil pump for dismantling
and assembling.rotor
type
gear type
7
417 MOT134,
DSL111,
FIT058,
oil stone
15 cm x 5 cm x 2.5 cm
63
418 ELE107
oil testing kit
transformer oil test kit
input -230 volts
output : o to 100 kv
motorized operated dimmer with
rating of rise 1 rpm with oil cup
2.5 mm gauge
24
419 CAR016
oilstone(carborundum)
universal silicon carbite
combinationrough and
fine
200x 50x25 mm
10
420 DSL112
oscilloscope
20mhz
15
421 ELE034
out side micrometer 075 mm
grease gun - chrome plated steel body
, rubber grip and offset nozzle ,
cartridge , bulk or suction fill, suitable
for medium / heavy greases . size -400
gram to 450 gram .
56
422 ELE049
outside and inside
divider calliper 15 cm
caliper inside high quality polished
steel with ground finished points. a
circular spring joint
the legs and a fine adjusting screw is
mounted across the legs and is used
for setting the distance between the
two
size 6 " set of 3 pcs.
66
423 MOT136,
DSL113
outside micrometer
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard , all supplied in a
impact resistant fitted plastic case.
range : 0 to 25 mm
least count : 0.01 mm
24
424 MOT137,
DSL114
outside micrometer
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
21
Page | 99
with setting standard , all supplied in a
impact resistant fitted plastic case.
range : 25 to 50 mm
least count : 0.01 mm
425 MOT138,
DSL115
outside micrometer
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard , all supplied in a
impact resistant fitted plastic case.
range : 50 to 75 mm
least count : 0.01 mm
7
426 MOT139
outside micrometer
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard , all supplied in a
impact resistant fitted plastic case.
range : 75 to 100 mm
least count : 0.01 mm
2
427 MCH105
parallel shank end mills
ø6, ø10 and ø 16 are (double fluted),
ø 20 mm
& ø 25mm (four fluted)
4
428 SEWT021
pattern hanging stand
woodan or plastic
12
429 SEWT020
pattern notcher
genral
25
430 SEWT019
pattern punch
genral
20
431 DSL009,
DSL117
philips screw driver of 5
pieces
100 mm to 300 mm
94
432 MOT009,
philips screw driver set
of 5 pieces
100 mm to 300 mm
29
433 ELE130
pin type, shackle type &
suspension type
insulators
suspension type insulators
65
434 ELE020
pincer 150 mm
pincer 150 mm - ideal for the easy
removal of tacks and nails bonded
vinyl coated handle double polished
head and joint with induction
hardened cutting edges .
586
435 SEWT010
pinking shears
25 cm brass handle 12 "
8
436 FIT161
pipe bender spool type
up to 25 mm. with stand
manually operated.
pipe bender spool type up to 25 mm
with stand manually operated
10
Page | 100
437 MOT248
pipe bending machine
(hydraulic type) 12mm to 30mm
4
438 FIT160
pipe cutter 6 mm to 50
mm wheel type.
pipe cutter 6 mm to 50 mm wheel
type.
8
439 ELE072
pipe cutter to cut pipes
above 5 cm dia
pipe cutter to cut pipes above 5 cm
dia ,designed for work in areas where
a complete turn is impossible. weight
10kg
61
440 ELE071
pipe cutter to cut pipes
upto 5 cm. dia
pipe cutter to cut pipes upto 5 cm. dia,
designed for work in areas where a
complete turn is impossible. weight
3to 3.5kg
102
441 MOT142
pipe cutting tool
p-118d
6
442 MOT143
pipe flaring tool
dies 3/16-5/8 flare tubing brake line
6
443 FIT095
pipe vice 100mm
pipe vice 100mm heavy duty 10kg
made up of gray cast iron body
6
444 ELE039
pipe vice 15 cm
bearing puller - 3 jaw industrial
reversible double ended adjustable
manufactured from drop forged size 150 mm
122
445 FIT094
pipe wrench 40 cm
pipe wrench overall length 450 mm
made up of forged steel
14
446 MOT144
piston ring compressor
ø 53-175 mm force rc-4
3
447 MOT145
piston ring expander
and remover.
works with piston rings 2" to 315/16" (50mm-100mm) diameter
universal design can be used on
most vehicles
applies pressure evenly to prevent
ring breakage
chrome steel construction
vinyl dipped grip handles
3
448 MOT146
piston ring groove
cleaner.
comes with two easy-to-set cutter
wheels for quick cleaning of groove
comes in skin-pack
handles pistons 2 3/4" to 5"
diameter
adapter plate available for smaller
pistons, l" to 2 3/4"
7
449 FIT166
pitch anvils
for checking metric threads 60
2
450 TUR057
plain ring and plug
gauge
12 to 50 mm by 1mm
3
Page | 101
451 CAR035
plane adjustable circular
250 mm
4
452 CAR009
plane jack metal.
335 mm. x 50 mm cutter
18
453 CAR032
plane ravvet adjustable
250 mm. x meters x 9 mm. cutters.
4
454 CAR010
plane smoothing
metal 200 mm. x 50 mm cutter.
20
455 ELE057
plane, smoothing cutters
50 mm
plane, smoothing cutters - jack plane
smooth base , made from fine grey
iron castings , fully hardened cutting
blade , fitted with chemically treated
size - 225 mm x 50 mm blade size . set
of two
72
456 MCH133
planer gauge standard
size
stander size
2
457 FIT139
planishing hammer
300gms planishing hammer with
handle
19
458 MCH079
plier cutting
200 mm
0
459 ELE002
plier insulated 150 mm
mechanical combination plier ,with
pvc insulation ,150mm
material : chrome vanadium steel /
carbon steel
finish :chrome plated polished heads /
burnished finish
534
460 ELE003
plier side cutting 150
mm
insulated with pvc , length : 150 mm
material : chrome vanadium steel /
carbon steel
finish :chrome plated polished heads /
burnished finish
344
461 MOT010,
DSL123,
pliers combination
mechanical combination plier ,with
pvc insulation ,200mm
material : chrome vanadium steel /
carbon steel
finish :chrome plated polished heads /
burnished finish
86
462 FIT061
pliers combination 15
cm
mechanical combination plier ,with
pvc insulation ,150mm
10
463 DSL124,
MOT148
pliers flat nose
insulated with pvc , length : 150 mm
material : chrome vanadium steel /
carbon steel
finish :chrome plated polished heads /
burnished finish
10
464 TUR033
pliers flat nose
150 mm side cutting
15
Page | 102
465 ELE050
pliers flat nose 150 mm
pvc insulated pliers flat nose - polished 118
head drop forged from carbon steel
,hardened and tempered , flat
serrated jaws from grip , size -150 mm
,
466 MOT149,
ELE051,
DSL125
pliers round nose 150
mm
pvc insulated plier round nose - from
136
drop forged carbon steel ,hardened
and tempered , with heavy duty sleeve
size-150mm
467 DSL126,
MOT150
pliers side cutting
insulated with pvc , length : 150 mm
material : chrome vanadium steel /
carbon steel
finish :chrome plated polished heads /
burnished finish
15
468 CAR033
plough plane with set of
8 cutter
up to 12 mm. width
4
469 CAR064
plunger saw set / pistol
grip type.
genral
2
470 FIT132
pocker.
pocker 2.5 feet mild steel best quality
20
471 DSL127
portable electric drill
machine use for up to 12
mm drill
1/2 kw 22 volt
9
472 FIT033
portable hand drill
(electric) 0 to 6 mm
electrical drill portable machine
drilling dia in wood : 15 mm
drilling dia in steel : 6.5. mm
power input : 350 w , single phase
no-load speed : 4000 rpm
weight approx : 1 . 1 kgs
17
473 ELE091
potential transformer
415 volt,50hz, pt ratio
11kv/ 110v, 10va
potential transformer , pt ratio
1.1kv/110v , 10 va , 415v, 50hz .
26
474 CAR090
power screw driver
300 mm
2
475 ECS077
precision set of screw
drivers
t5, t6, t7
8
476 FIT135
prick punch
prick punch ø10x100 mm made upof
high speed steel
12
477 MOT152,
DSL128
prick punch
15 cm
17
478 TUR008
prick punch
100 mm
26
479 DMC015
proportional dividers
15 cm
13
Page | 103
480 SUR002
protractor
15 cm full circular
35
481 ELE037
pully puller
rawl plug tool & bit , 8" overall length.
64
482 ELE011
punch centre 150 mm x
9 mm
non-roll. manufactured from
hardened and tempered steel with a
knurled body for positive grip. 150
mm lengthxø9mm
410
483 FIT031
punch hollow 6 mm to
19 set of 5
punch hollow 6 mm to 19 set of 5,
made of high carbon steel,hard and
tempered
16
484 MOT153
punch letter
4mm (number)
4
485 FIT029
punch letter 3 mm set.
letter punch 3 mm,made of high
7
carbon steel,hard and tempered,with
alphabets a to z
486 FIT030
punch number set 3
mm
number punch 3 mm,made of high
13
carbon steel,hard and tempered,with
numbers 0 to 9
487 FIT032
punch round 3mm x 4
mm set of 2
punch round 3 mm and 4 mm set of
2 ,made of high carbon steel,hard
and tempered
20
488 DSL130
radiator cut section-
cross flow type
8
489 DSL131
radiator cut section-
down flow type
7
490 DMC012
radius curve metric
3 mm to 15 mm
23
491 TUR049
radius gauge
1 to 7 mm & 7.5 to 15 mm
2
492 MCH128
radius gauge metric set
(1-6 mm)
2
493 MCH070
radius turning
attachment
stand
2
494 SUR046
ranging rod
4m
50
495 CAR054
ratchel brace
250 mm. swap
4
496 ELE036
rawl plug tool and bit
micrometers outside with enamelled
frame and tungsten carbide tipped
anvils. high quality fitted metal case
with adjusting spanner over supplied
with setting standard. all supplied in a
impact resistant fitted plastic case.
range : 0 to 25 mm
least count : 0.01 mm
58
Page | 104
497 MCH058
reamer
6 mm to 25 mm by 1 mm
2
498 TUR074
reamer adjustable
10 to 20 mm
1
499 MCH059
reamer adjustable
10 mm to 15 mm by 75 mm
0
500 TUR073
reamer machine straight
flute
6 to 25 mm
2
501 FIT074
reamer parallel 12 16mm set of 5.
reamer parallel 12-16 mm set of 5 ,
made up of high speed steel
15
502 MOT157
rear axle full floating
type with stand for
dismantling and
assembly
503 MCH036
reduction sleeve morse
1-1, 3-1, 4-1, 4-2, 5-1, 5-2, 6-1,
2
504 ELE111
resistance type starter
starters for 2 to 5 h.p. a.c slipring
induction motors resistance type
starter
32
505 TUR096
revolving centrer
( to suit lathe tailstock )
1
506 ELE083
rheostat 0 - 25 ohm, 1
amp
rheostat 0 -25 ohm, 5 amp
vitreous enamelled steel tube wound
with heavily oxidized resistance
wire
supported on robust diecast end
stands
heavy-duty siding contact is
multileaf phosphor bronze and
nickel-plated for corrosion
resistance
terminal posts are fitted, facilitating
external connection to conventional
0.16 in. (4mm) plug
28
507 ELE084
rheostat 0 - 300 ohm, 1
amp
rheostat 0 -300 ohm, 5 amp
vitreous enamelled steel tube wound
with heavily oxidized resistance
wire
supported on robust diecast end
stands
heavy-duty siding contact is
multileaf phosphor bronze and
nickel-plated for corrosion
resistance
terminal posts are fitted, facilitating
external connection to conventional
0.16 in. (4mm) plug
31
508 ELE080
rheostat 0 -1 ohm, 5
rheostat 0 -1 ohm, 5 amp
vitreous
enamelled steel tube wound with
29
3
Page | 105
amp
heavily oxidized resistance wire
supported on robust diecast end
stands
heavy-duty siding contact is
multileaf phosphor bronze and
nickel-plated for corrosion
resistance
terminal posts are fitted, facilitating
external connection to conventional
0.16 in. (4mm) plug
509 ELE082
rheostat 0 -10 ohm, 5
amp
rheostat 0 -1 ohm, 5 amp
vitreous
enamelled steel tube wound with
heavily oxidized resistance wire
supported on robust diecast end
stands
heavy-duty siding contact is
multileaf phosphor bronze and
nickel-plated for corrosion
resistance
terminal posts are fitted, facilitating
external connection to conventional
0.16 in. (4mm) plug
33
510 MOT158,
DSL133
right cut snips
250mm
17
511 MCH130
ring gauges
5 mm to 25 m by 2.5 mm (go & no
go)
2
512 CAR025
rip saw
600 mm.
4
513 MOT159
rivet sets
snap and dolly combined 3mm,
4mm, 6mm
6
514 DSL134
rivets snap and dolly
combined
3mm, 4mm, 6mm
10
515 ELE097
rotary switch 16 a
rotary switch 16 a,440v
30
516 CAR067
round crow bar with
chisel and claw end
1070 x 25 mm.
2
517 CAR036
router plane
8"
4
518 SEWT016
rubber mat 4'x4'
(size as per requirement)
15
519 FIT017,
FIT194,
MCH014
safety goggles.
safety goggles -anti -dust safety
goggles impact and dust resisstant
safety goggles are designed to
protect the wearer from eye injury
against moderate unspeccified
mechannical impact hazards single
piece clear polycarbonate lens in a
green tinted housingh with an
elasticated adjustment strap , direct
350
Page | 106
ventilation .class 1 optical clarity.
520 CAR007
saw hand
450 mm lenth
14
521 CAR075
saw sharpwning vice
250 jaws.
2
522 CAR008
saw tenon
300 mm lengh
16
523 DMC002
scale card board- metric
set of eight a to h in a
box
1: 1,1:2, 1:2:5,1: 5, 1:10, 1:20, 1:50,
1:100,1:200, 1:500,
1:1000,1:2000,1:1250,1:6000, 1:38
1/3, 1:66 2/3
26
524 SEWT008
scale plastic
24”
51
525 DMC003
scales plotting box wood
6 metric scales 30 cms long with
offset scales.
36
526 SEWT009
scissors
25 cm
48
527 ELE041
scissors blade 150 mm
thermometer - fitting in yellow glass
range - 0 to 110 °c
118
528 MOT160,
DSL135
scraper flat
25 cm made up of high carbon steel
15
529 FIT075
scraper flat 15 cm
scraper flat 15 cm. made up of high
carbon steel
79
530 MOT161,
DSL136
scraper half round
25 cm made up of high carbon steel
14
531 FIT077
scraper half round 15cm
scraper half round 15cm, made up of
high carbon steel
94
532 MOT162,
DSL137
scraper triangular
25 cm made up of high carbon steel
14
533 FIT076
scraper triangular 15 cm
scraper triangular 15 cm, made up of
high carbon steel
83
534 CAR043
screw driver
450 mm slotted head blade alloy
steel, handle transparent cellulose
acetate
4
535 CAR044
screw driver
250 mm slotted head blade alloy
steel, handle transparent cellulose
acetate
4
536 MOT011,
DSL011
screw driver
blade size 9x 200mm slotted head
with tip dimension 9 x 0.9 mm ,
blade alloy steel, handle transparent
cellulose acetate
44
Page | 107
537 MOT012
screw driver
300 mm x 9 mm. blade
18
538 TUR030
screw driver
200 and 300 slotted head , blade
alloy steel, handle transparent
cellulose acetate
3
539 DSL012
screw driver
blade size 9x 300mm slotted head
with tip dimension 9 x 0.9 mm ,
blade alloy steel, handle transparent
cellulose acetate
54
540 ITE015
screw driver
blade size 9x 150mm slotted head
with tip dimension 9 x 0.9 mm ,
blade alloy steel, handle transparent
cellulose acetate
4
541 ELE004
screw driver
blade size 6 x 100mm slotted head
with tip dimension 6 x 0.6 mm ,
blade alloy steel, handle transparent
cellulose acetate
459
542 FIT009,
CAR045,
ELE005
screw driver
blade sizi 6 × 150mm slottet head
with tip dimension 6 0.8 mm, blade
alloy steel , handle transparent
cellulose acetate
694
543 ELE008
screw driver 200 mm
size- 8 x 200 mm, tip size4.0x6.0mm, with pvc insulation
539
544 MOT124,
DSL102
screw driver insulated
30 cm x 9mm steel blade with plasti
handle
29
545 MOT123,,
DSL101
screw driver insulated
20 cm x 9mm steel blade with plasti
handle
28
546 SEWT013
screw driver set
75 mm, 125 mm, 200 mm, 300 mm
length
7
547 ITE003
screw driver set (set of 5 200×9 alloy steel, handle
)
transparent cellulose acetate,
100×4,125×5,150×6,175×8
42
548 MCH030,
CAR013
screw driver, heavy
dutywith handle
300 mm, blade size 9x 300 mm
slotted head with tip dimension 9 x
0.9 mm , blade alloy steel, handle
transparent cellulose acetate
20
549 FIT090,
MCH127
screw pitch gauge.
screw pitch gauges metric 20 blade for accurately measuring internal and
external thread forms hardened and
polished steel, the blades are
precision milled for optimum
accuracy.
enclosed in a steel case.
13
Page | 108
550 TUR060
screw thread
micrometer
interchangeable
measuring various screw threads to
0.00005"/0.001mm and can be
linked to the spc system
2
551 FIT165
screw thread
micrometer with
interchangeable 025mm.
interchangeable anvil micrometer
9
carbide tipped spindle faces. hardened
and ground anvils.
supplied in metal case with adjusting
spanner.
four anvils and three setting
standards.
range : 0- 100 mm
graduation : 0.01 mm
552 ELE019,
TUR005,
dsl013,
MOT163,
DSL013,
DSL138
scriber (knurled centre
position )
manufactured from hardened and
tempered high grade steel with
knurled bodies for high grip and
precision ground points for accurate
marking . straight and bend type. size150mm, point grinded to 12 to 15
degrees
604
553 MOT164
scriber with scribing
black universal
engineers scribing block / surface
gauge with scriber 7 1/2" arm
6
554 DSL139
scriber with scribing
black universal with 19
cm scriber
7 1/2", 19cm scriber. a new
engineers scribing block.
8
555 MCH018
scribing block universal
300 mm
1
556 SEWT002
seam ripper
genral paychip
51
557 MOT165,
DSL140
set of stock and dies
metric
10
558 CAR095
set ofturning tools for
above lathe machine
3 mm to 35 mm
3
559 DMC005
set square celluloid
25 cm,2mm thick with bevelled
edges 60 degrees.
52
560 DMM002
set square celluloid 45
(250 x 1.5 mm)
4
561 DMC004
set square transparent
20 cm, 2 mm thick with bevelled
edges 45 degree
52
562 FIT138
setting hammers with
handle.
setting hammer with handle, head
length-150mm,overall length300mm,weight 500gm
19
563 ECS070
seven segment dpm
range-voltage-dc : 200mv, 2v, 20v,
200v, 1000v. display : 3 and 1/2
digit, 0.5" height. input impedance :
24
Page | 109
10m ohms. accuracy(basic dc) : 2%
+ 4 digits. power supply
requirement: 230v ac. sampling
time: 0. 4 sec.
564 DSL141,
MOT166
shear tin man’s
450 mm x 600mm
19
565 MOT167
sheet metal gauge
dial, 0-10 mm,
6
566 MCH103
shell end mill
ø 50 x 36 x ø 22 (preferably inserted
tip type)
2
567 MCH104
shell end mill
ø 75 mm x 50 x ø 22 (preferably
inserted tip type)
2
568 DSL143,
MOT168
sher tinmans
300mm
27
569 FIT128
shovel.
shovel. for use in furnace length 3feet
13
570 MCH084
side and face cutter dia
80 x 8
2
571 MCH085
side and face cutter dia
160 x 10
2
572 MCH086
side and face cutter dia
100 x 12
2
573 MCH087
side and face cutter dia
160 x 16
2
574 MCH088
side and face cutter dia
200 x 20
3
575 MCH089
side and face cutter dia
100 x 10
2
576 ITE005
side cutting pliers
insulated
150 mm material : chrome vanadium 42
steel / carbon steel
finish :chrome plated polished heads
/ burnished finish
577 TUR062
sin bar with centers
200 mm
1
578 MCH123
sine bar
200 mm
3
579 FIT150
sine bar 125 mm.
sine bar 125 mm center to center
length of rollers made up of tungsten
carbide
8
580 FIT151
sine bar 250 mm.
sine bar 250 mm center to center
length of rollers made up of tungsten
carbide
9
581 MCH097
single angle cutter
63 x 18 x 45 rh
0
582 MCH098
single angle cutter
63 x 18 x 45 lh
0
Page | 110
583 MCH099
single angle cutter
63 x 18 x 60 rh
0
584 MCH100
single angle cutter
63 x 18 x 60 lh
0
585 FIT100
sleeve drill morse 0 - 1,
1 - 2, 2 - 3.
morse taper sleeves no. 0-1, 1-2, 2-3,
9
586 FIT144
slip gauge as johnson
metric set.
slip gauge metric set (83 pes.) made
up of tungsten carbide
9
587 TUR063
slip gauge metric set (
87 pieces in a box )
precision metric gauge block set 0100mm (83 pcs) endmass satz grade
2 ussr nos
3
588 MCH126
slip gauge set (normal
set) metric
(for the whole institute)
3
589 CAR066
slip stone
100 mm.
8
590 MCH101
slitting saw cutter
ø 75 x 3 x ø 27 mm
2
591 MCH102
slitting saw cutter
ø 100 x 6 x ø 27 mm
2
592 DMC028
smart board / inter
active board
6'x4'
8
593 FIT119
smith's square 45 cm x
30 cm.
smith’s square 45 cm x 30 cm. made
up of stainless steel
13
594 FIT140
snip bent 25 cm.
snip straight - from drop forged
carbon steel , hardened and tempered
, finely sharpended for cutting action ,
size - 250 mm.
19
595 CAR062,
ELE053
snip straight
200 mm.
72
596 FIT137
snips straight 25 cm.
snip straight - from drop forged
carbon steel , hardened and tempered
, finely sharpended for cutting action ,
size - 250 mm.
21
597 MOT169,
DSL144
soldering copper
hatchet type
500gms
14
598 ITE013
soldering iron
soldering iron - from safe grip the
mains lead is held by a cable
clamping screw which eliminates the
strain on electrical connections , all
supplied complete with a double flat
nickel plated tip , size 230 v 60
watts 230 v 25 watts set of 2 pes
.230 v 60 watts 230 v 25 watts
4
Page | 111
599 ITE018
soldering iron
230 v -240w
4
600 ITE023
soldering iron
230 v 10 watts
2
601 ITE007
soldering iron .
soldering iron - from safe grip the
mains lead is held by a cable clamping
screw which eliminates the strain on
electrical connections , all supplied
complete with a double flat nickel
plated tip , size - 25 watt, 240 watt,
set of 2 pes .
42
602 ELE066
soldering iron 25 watt,
65 watt, 125 watt
soldering iron - from safe grip the
mains lead is held by a cable clamping
screw which eliminates the strain on
electrical connections , all supplied
complete with a double flat nickel
plated tip , size - 25 watt, 65 watt, 125
watt set of 3 pes .
65
603 FIT062
soldering iron 350 gm.
copper bit soldering iron 350 gm,
25watt, maximum temp=380 degree
celcius
26
604 ITE011
soldering iron
changeable bits
15 w
42
605 DSL145,
MCH039
solid parallels in pairs
(different size) in metric
metric
36
606 TUR032
spanner adjustable
200 mm
16
607 FIT065
spanner adjustable 15
cm
spanner adjustable .drop forged
carbon steel size- 15 cm
20
608 ELE022
spanner adjustable 150
mm,300mm
adjustable spanner size - 150 mm ,
300 mm set of 2 pes. - from high
strength i beam section phosphate
vanadium steel for improved strength
and rigidity , the jaws are heat treated
for extended tool life , high polished
corrosion - resistant finish , 15° offset
head angle for positive torque control
, slimline tapered jaws for improved
access into confined spaces , parallel
jaws with smooth jaw adjustment
and self-locking design prevents the
jaws opening unintentionally even
when under full load .
64
609 MOT171
spanner clyburn
15 cm
4
610 FIT064
spanner d.e. 6 -26 mm
spanner d.e..drop forged carbon steel
metric standard set size 6x7 to 24 x27
58
Page | 112
set of 10 pcs.
set of 10 pcs.
611 DSL014,
DSL147
spanner d.e. of 12 pieces
(6mm to 32mm)
55
612 MCH034
spanner d.e. series 2
(set of 7 pieces)
0
613 MOT014
spanner d.e. set of 12
pieces
(6mm to 32mm)
21
614 TUR031
spanner double ended
6 mm to 21 mm
3
615 DSL148
spanner t. flocks
for screwing up and up-screwing
inaccessible set of sevan mm size
14
616 MOT174
spanner, adjustable
15cm.
4
617 DSL015,
MOT015
spanner, ring of 12
metric sizes
6 to 32 mm.
108
618 MOT016,
DSL016
spanners socket with
speed handle
t-bar, ratchet and universal upto 32
mm set of 28 pieces with box
54
619 MOT176,
DSL151
spanners socket with
speed handle, t-bar,
ratchet and universal
upto 32 mm set of 28 pieces with
box
14
620 MOT178,
DSL149
spark plug spanner
14mm x 18mm x size
18
621 MCH032
spindle blade screw
driver
100 mm
0
622 FIT192
spindle key for cylinder
valve.
made up of stainless steel
22
623 TUR083
spirit level
0.05 meter 200 m
1
624 FIT028
spirit level 15 cm metal
spirit level 15 cm ,high quality two
factory set horizontal and angled
vials
which are shockproof to a tolerance
of 1mm per metre.
die cast zinc body with enamelled
finish. v-groove on base.
11
625 CAR034
spoke shaves
50 mm. cutter
8
626 SEWT017
sprayer
genral
15
627 CAR020
spring caliper inside
150 mm
4
628 CAR021
spring caliper out side
250 mm
4
629 CAR024,
sprit level
300 mm.
3
Page | 113
MCH028
630 FIT026
square adjustable 15 cm
blade.
material - stainless steel blade,
stoch-mild steel, marking on blade in
inch and both size-15 cm blade
length
20
631
square pyramid
8cm side base and 15 cm vertical
height
53
632 CAR004
squre, bevel
50 mm
16
633 FIT142
stake grooving.
stake grooving with stand,working
surface-8.1/2 x 1.1/2, shank1.25",weight-3.64kg
19
634 FIT141
stake hatchet.
stake hatchet with stand , blade length 17
4",shank 1.25",weight-1.82kg
635 SEWT023
stand for hanging
dresses
woodan make
15
636 ELE113
star delta startermanual, semiautomatic and
automatic
c.starters for 2 to 5 h.p. a.c motors
star delta starter- manual, semiautomatic and automatic
31
637 DSL154,
MOT179,
starter motor axial type,
pre-engagement type &
co-axial type
dimensions (mm): a 89mm b: 29mm
- 4.5" pcd mount
pinion diameter/teeth: 27/10
10
638 ELE110
starters for 2 to 5 h.p. a.c
motors
a.starters for 2 to 5 h.p. a.c slipring
induction motors resistance type
starter
29
639 SUR056
steel band
30 m & 20 m
2
640 MOT182,
DSL018,
MOT017,
TUR079,
MCH001,
FIT019,
ELE014
steel rule
30 cm graduated both in english &
metric units
939
641 MCH027,
FIT020
steel rule
60 cm graduated both in english &
metric units
43
642 MOT181,
TUR004,
DSL156,
FIT001
steel rule
15 cm inch and metric graduated
both in english & metric units
211
643 MCH026
steel tape
2 meter in case
1
Page | 114
644 SUR055,
DMC017
steel tape
30 m
32
645 ELE001
steel tape 15 m length
15 metre length with inch and mm
graduaton both made of steel
709
646 MOT018,
DSL019
steel tool box with lock
and key
(folding type) 400x200x150 mm
66
647 TUR099
steel turning
–set of 12 nos.
4
648 MOT183
steering assembly
1.rack & pinion, 2.worm & roller 3.
recirculating ball, 4.power steering
1
649 FIT159
stilson wrenches 25 cm
stilson/pipe wrench overall length 250
mm made up of forged steel
21
650 ELE073
stock and die set for 20
mm to 50 mm g.i. pipe
stock and die set for size - 20 mm to
50 mm g.i. pipe ½",¾",1", & 1¼",
1½",2" with sturdy plastic case, made
up of carbon steel
30
651 ELE074
stock and dies conduit
stock and dies conduit (size - 12mm to
30mm)½",¾",1" with sturdy plastic
case, made up of carbon steel
33
652 FIT059
stone carborandum 15
cm x 5 cm x 5 cm x 4 cm.
stone carborandum 15 cm x 5 cm x 4
cm
22
653 FIT021
straight edge 45 cm
steel
material- stanless steel, straight
edge 450×38mm harded, weight 600
to 650 gm
20
654 MOT184,
DSL158
straight edge gauge
2 ft.
15
655 MOT185,
DSL159
straight edge gauge
4 ft.
19
656 FIT007
straight scriber 15 cm.
manufactured from hardend and
tempered high grade steel with
knurled bodies for high grip and
precision ground points assurate
marking. straight type size 150mm
,point grinded to 12 to 15 degrees
222
657 MOT186
stud extractor
set of 3
5
658 FIT081
stud extractor ezy – out
stud extractor ezy- out ,use:- extract
broken bolt inside the job easly.
21
659 DSL160
stud extractor of (for
remoring broken studs)
3
5
Page | 115
660 MOT187,
DSL161
stud remover with
socket handle
4 piece 1/2" dr. stud puller sockets
6, 8, 10 ,12 mm
9
661 MOT188,
DSL162
surface gauge with dial
test indicator plunger
type
surface gauge with dial test indicator
plunger type . 0.01 mm
25
662 MCH015
surface plate
400 mm x 400mm grade
2
663 CAR080,
TUR011
surface plate
600 x 600 mm.
2
664 FIT022
surface plate 45 x 45 cm
ci / granite.
surface plate 45×45 manufaacture
closed grains gray cast ,iron ,free
from flows and fissures ,weight
aprox 62kg with aprox 3 ft hight
stand application : tool rooom ,
gauging and inspection advantage :
rust freey , corrosion free, non
glaring surface ,high precision ,
smooth action
grade : 0, with
nabl calibration certificate
packingh: thich wooden box
transport worthy
17
665 FIT172
surface roughness
comparison plates n1n12 grade
surface roughness comparison plates
n1-n12 grade, set of 12
8
666 FIT123
swage block 35 x 35 x 12 swage block 35 x 35 x 12 cm ,made up
cm.
of medium carbon steel
13
667 FIT122
swages top & bottom 12
mm /19
swages top & bottom 12 mm and
19mm,made up of medium carbon
steel
32
668 CAR071
t bar cramp
0.6 meter.
8
669 CAR072
t bar cramp
1.25 meter.
4
670 CAR073
t bar cramp
1.75 meter.
1
671 MCH106
t slot cutter with parallel
shank
ø 17.5 x 8 mm width x dia. of shank
8 mm
2
672 SUR006
t square
1250 mm/ mini drafter
42
673 MCH066
table chuck
75 mm jaw swivel base
1
674 MCH016
table for surface plate
900 x 900 x 1200 mm
1
675 SEWT014
table sharpener
plasti coted gensal
16
676 ELE070
table vice 100 mm jaw
material : body in graded cast iron
with hardened inter changeable steel
205
Page | 116
jaws with 100mm
finish : epoxy coated, chrome plated
rod , weight -9kg
677 MOT190,
DSL163
tachometer
(counting type)
6
678 SEWT004
tailor’s card scale
triangular
genral paychip
34
679 SEWT005
tailors square – plastic
genral paychip
44
680 DSL164
tandem master cylinder
with booster
lmv/lcv
22
681 TUR071
tap & die b.s.f. up to
1 inch
2
682 MCH050
tap and die set in box
metric pitch
(6 mm to 12 mm)
0
683 MCH131
taper gauge
m.t. no. 1, 2, 3, 4 & 5
3
684 FIT038
taps and dies complete
set in box 3-18 mm set
of 10
taps and dies complete set in box 318 mm set of 10 , size - 6 mm to 18
mm (metric thred
11
685 FIT036
taps and dies complete
set in box b.a
taps and dies complete set in box 0
to 10 b. a
12
686 FIT037
taps and dies complete
set in box with-worth.
taps and dies complete set in box
11
bsw with-worth size 3/16 bsw
taps ,1/4 bsw taps,5/16 bsw
taps,3/8 bsw taps,7/16 bsw taps,1/2
bsw taps,9/16 bsw taps,5/8 bsw
taps,11/16 bsw taps,3/4 bsw tap
687 MOT193
taps and wrenches metric
included are one tap and one die in
3
the following sizes:
m3 x 0.5, m4 x 0.7, m5 x 0.8, m6 x
1.0, m7 x 1.0,m8 x 1.25, m9 x 1.25,
m10 x 1.5, m12 x 1.75
ideal for cleaning and cutting
threads on mild steel and aluminum,
with sliding jaw type tap wrench and
t-bar tap wrench and steel die
holder, knurled screws, taps and
dies.
the complete set is made from heat
treated allow steel and built to last
a must have set of precision
machined, high carbon steel taps and
dies (metric) - including coarse and
fine sized dies with machined leadins for ease of use.
Page | 117
688 MOT194
telescope gauge
measures the true sizes of holes,
slots and recesses from 5/16" - 6"
contact plungers automatically selfcenter at all times and in all
positions
plungers locked in any desired
setting
locking mechanism consists of a
knurled screw at the end of the
handle
available as individual gages or in
sets
satin chrome finish
contact ends are hardened and
radius ground providing clearance
for insertion into the smallest hole
the gages will enter
range 5/16" to 6"
7
689 MCH122
telescopic gauge
13 mm to 300 mm
1
690 MOT195,
DSL168
temperature gauge with
sensor
0-100 deg c
17
691 DMC007
template –architects and
builders
plastic
78
692 MOT196
tester sparking plug
‘neon’ type
gunson colortune 14mm plug most
common best spark plug mixture
tester
2
693 ELE040
thermometer 0 to 100
deg centigrade
size - 100mm (open type), weight 10
kg
44
694 DSL169
thermostat valve (any
verticle)
lmv/lcv
13
695 SEWT003
thimble
genral paychip
42
696 SEWT007
thread cutter
genral paychip
49
697 TUR100
thread plug gauge
m-20 & m-21
4
698 MOT251
tin smiths bench folder
600 x 1.6mm
4
699 FIT196
tip cleaner
tip cleaner made of copper
110
700 FIT118
tongs fiat 350mm.
tong flat 350mm.. made up of mild
steel
35
701 TUR088
tool bit assorted sizes on
holder
compact pocket sized sets
tip out drawer, holds 10 wiha insert
bits. closed dimensions 3" x 2" x
1/2".
1
Page | 118
702 TUR077
tool bits
12 x 150 mm sq. assorted shaped
14
703 MCH060
tool bits h.s.s.
6 mm square
0
704 MCH061
tool bits h.s.s.
10 mm square
0
705 MCH062
tool bits holder
(armstrong) l.h
2
706 MCH063
tool bits holder
(armstrong) r.h.
0
707 TUR097
tool cemented for
carbide assorted shaped (external)
2
708 TUR120
tool holders
to suit the cnc machine for turning,
5
threading,grooving (external &
internal), parting off operation,
boring, under-cutting with 20 inserts
of each operation.
709 SHD003
tool kit (hand tools)
product type: hand tool kit
multi purpose functionality
easily adjustable
stainless steel
easy to use
durable
12
710 FIT115
torque wrench (14 to
68 nm)
torque wrench 14 to 68 nm forged
steel
14
711 MOT201,
DSL172
torque wrenches
5-35 nm, 12-68 nm & 50-225 nm
5
712 SUR032
tracing board with lamp
homcom 14" led light box tracing
table pad
4
713 MOT202,
DSL173,
FIT129
trammel
30 cm
19
714 SEWT024
trial room with 3 side
mirrors of size 150 cm x
60 cm each with
arrangements of
hanging dresses
size 150 cm x 60 cm
2
715 FIT188
trolley for gas cylinders.
cylinder trolley.
robust ,heavy gauge steel ,welded
construction,with two large diameter
wheels & solid tyres.for use with
oxygen & / or acetylene cylinders.16"
pneumatic tyre.
cylinder capacity : 2/ oxy/acetylene
11
716 MOT253
trolley type portable air
compressor single
45 liters capacity air tank, along
with accessories & with working
2
Page | 119
cylinder with
pressure 6.5 kg/sq cm
717 MCH020
try square
300 mm
0
718 TUR055
try square
150 blade
0
719 FIT002
try square 10 cm blade.
material- stainless steel, blade ,stock 163
-mild steel ,marking on blade in inch
and mm both size -10cm blade
length
720 ELE048
try square 150 mm
blade
try square 6” ,stock made of cast iron
or aluminum and blade made of spring
steel or stainless steel with metric
graduation.
93
721 CAR031
trying plane metal
450 mm. x 60 mm. cutter
2
722 DMC006
t-square
1250mm/mini drafter/ parallel bar
26
723 ITE020
tubular box spanner (set
of 6nos) 8×9 to 18×19
0-32 mm
6
724 DSL174,
MOT206
turbocharger cut
sectional view
lmv/lcv/hcv, made out of full size
original parts, suitably sectioned and
to demonstrate the working of
turbocharger, is mounted on a
suitable base.
12
725 ITE009
tweezers
made up of stainless steel - for
workshop use cross pattern types are
self closing and open only under
applied pressure, high quality finish ,
size-100 mm. sharp nose .
42
726 ECS078
tweezers – bend tip
6 " length
6
727 ELE052
tweezers 100 mm
made up of stainless steel - for
workshop use cross pattern types are
self closing and open only under
applied pressure, high quality finish ,
size-100 mm. sharp nose .
128
728 CAR058
twist drill bits
6,8,10,12, mm
2
729 TUR066
twist drill straight shank
1 to 12 mm by 1 mm
2
730 TUR067
twist drill taper shank
10-12 mm by 0.5 mm
1
731 MOT255
two post car lift –
capacity 4000 kg
4
732 MOT256
tyer changer machine
operating pressure 8 – 10 bar
max. wheel diameter 980 mm
wheel width 3”- 12”
noise level <75db
2
Page | 120
rim clamping from outside 10” – 18”
rim clamping from inside 12” – 21”
motor power 0.75 / 1.1kw
net weight 179 kg
gross weight 207 kg
733 MOT207
tyre & split rim wheel
assembly
2
734 FIT024
universal scribing block
22 cm.
universal scribingh block 9" -surface 21
gauges used for marking out lines
parallel to a true adge or groove, and
also to mark the centre of round
bars . machined base , a double
ended scriber and an adjustable
attachment for holding scribers.
735 TUR016
universal surface gauge
250 mm arm
2
736 MCH074
universal table angle
plate
angle plate
0
737 MCH073
universal vice
150 mm
1
738 MCH019
v- block
100/7-80-a
1
739 MOT210,
DSL177
v’ block
75 x 38 mm pair with clamps
10
740 MOT211
vacuum assisted
hydraulics brake
assembly with vacuum
booster
suitably sectionised full size unit.
consisting of original parts such as :vacuum booster with master
cylinder assembly, wheel cylinder,
brake shoes, brake drums,
motorised vacuum pump and
necessary connections. completed
with operating lever and mounted
on heavy iron stand.
2
741 DSL178,
MOT212
vacuum gauge to read
0 to 760 mm of hg.
15
742 FIT025
v-block pair 7 cm and 15
cm with clamps
vee block with clamp size 75×50×50 and 150×100×50 mm set
of 2 pcs
15
743 TUR044
vernier bevel protractor
300 mm blade, vernier bevel
16
protractorsuitable for measuring and marking
out angles.
fully hardened and ground stainless
steel. bevelled blade ends. scale plate
is graduated 0 - 90° - 0, in both
directions through 360°. magnifying
lens for easy reading of vernier scale
Page | 121
to 5 minutes of degree least count.
744 MCH120
vernier bevel protractor
with
150 m blade
1
745 MOT215,
DSL181
vernier caliper
0-300 mm with least count 0.02mm
27
746 FIT168
vernier caliper 0-150
mm. l.c. 0.02 mm.
standard vernier calipers
give four types of reading - inside,
outside, depth and step. dual reading
scale
(metric and inch) with 14° bevelled
vernier scale for reduced parallax
reading
error and knurled locking nut. from
hardened stainless steel for
rigidity. satin finish.
range : 150/6” , 0.02 mm .
16
747 TUR042
vernier caliper outside,
inside and depth 200
mm /8 incheswith
metric & inch scale
10
system of measurement inch/metric
material type stainless steel
manufacturer series number 530
series
specific uses for product depth ,
inside , outside , step
tip description standard
748 MCH118
vernier gear tooth
caliper
reputeded company
2
749 MCH117
vernier height gauge
250 mm
2
750 TUR054
vernier height gauge
with dial
300 mm l.c. 0.01 mm
4
751 FIT088
vernier height gauges
30 cm.
vernier height gauges 30 cm.
manufactured from hardened
stainless steel . least count:-0.02mm,
with offset and straight scriber both.
9
752 TUR045
vernier micrometer
0 - 25 mm o/s lc 0.001mm
10
753 TUR046
vernier micrometer
25 - 50 mm outside reading
0.001mm
7
754 TUR047
vernier micrometer
0 inch to 1 inch. outside reading
0.0001inch
13
755 FIT101
vice bench 12 cm jaws.
bench vice 120 mm - from the highest
quality castings with precision cut
screw mechanisms and precision
machined jaws and should be
screwed. suitable for workshop,
90
Page | 122
automotive and engineering use jaw
width . weight 10-15kg
756 DSL182
vice grip pliers
20 cmalloy steel, handle transparent
cellulose acetate
12
757 FIT102
vice leg 10 cm jaw.
vice leg 10 cm jaw
12
758 ELE102
voltage stabiliser input
150 – 230 volt ac
output: 220 volt ac
voltage stabiliser input: 150 – 300 volt
ac output: 250 volt ac
31
759 SEWT034,
DMC026
wall clock
hmt make
14
760 SEWT018
waste bin big / small
big plastic 15 kg
30
761 MOT217
water pump for
dismantling and
assembling
1/2 hp capacity
8
762 SEWT022
water tub
60 cm dia
4
763 FIT180
welder cable to carry
200 amps. with flexible
rubber cover
arc welding cables multi cored
copper 400/ 600 amp insulated
with epdm (ethylene propylene
diene monomer) , flexible cables
(wires) for heavy duty
160
764 FIT195
welding helmet with
coloured glass
welders' helmets body made of
24
bakelite or light weight fibre(with
clear polycarbonate lens)- non
reflective and non flammable
insulated so designed to give
maximum protection to the eyes, ears
, face, neck and part of the top head of
the head of the user during welding
and cutting processes.
765 FIT186
welding torch tips of
different sizes
h.p. welding torch with 5 nozzles
made of brass or alloy metal,nozzle
must be of copper or alloy
13
766 FIT193
welding torches 5 to 10
zzles.
h.p. welding torch with 5 nozzles
made of brass or alloy metal,nozzle
must be of copper or alloy
11
767 MOT218
wheel cylinder
bosch 0986 ab8 104 e7a front wheel
cylinder assembly lh2 - omn
8
768 FIT097,
TUR059
wheel dresser
wheel dresser - huntington type
wheel dressers with improved quick
release cutter wheel design which
reduces down-time when changing
wheels. ergonomically designed cast
11
Page | 123
iron handle and case hardened,
polished cutters. suitable for cleaning,
sharpening and truing grinding
wheels.
769 FIT113
wing compass 25.4 cm
or 30 cm.
wing compass 25.4 cm or 30 cm
22
770 MOT219
wiper motor assembly
iper motor e-008-225 - for volvo vn
truck series -
4
771 DSL020,
MOT019
wire cutter and stripper
130 mm length, wire size 0_20 mm
84
772 FIT091,
MOT220
wire gauge, metric
standard.
standard wire gauges from high grade
tool
steel with satin brushed finish. each
slot is marked with the nominal size.
two part pivoting space saving design
range of sizes - 1-36 swg.
20
773 ELE043
wire stripper 20 cm
multi-purpose crimping plier kit made
from heavy gauge carbon steel heat
treated to
hra 65/70. chemically blackened with
cushion grip
handles for operator comfort. kit
comes complete with 100 assorted
insulated and non-insulated terminals
in a neat plastic see through box.
strip range: 0.75 - 6.
crimp/cut capacity: 1.5 - 16mm.
100 piece kit
49
Page | 124
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement