Product Information Consequence UE

Product Information Consequence UE
Home Systems I Professional I Automotive I Multimedia
Product Information Consequence UE
Technical advantages and specialities of the new Consequence Ultimate Edition
The Compound System features two bass drivers in two separate cabinet
enclosures. The inner driver (1) operates in-between the two cabinets and
ensures that the air pressure in the upper bass cabinet remains constant at
all times. As the damping for the outer bass driver (2) remains the same,
independent of the movement of the cone, this woofer performs as if it is in
a cabinet enclosure of an infinite volume. The advantage of the Compound
System is a precise bass reproduction down to the lowest frequencies without any overlay of resonance.
For Consequence Ultimate Edition, the Compound System design was
further developed into a Vented Compound System via the use of a specially
tuned, extraordinarily large bass reflex port (3). The Vented Compound
System enhances the bass performance dramatically; advantages of the
Vented Compound system are: low-bass reproduction free of audible
resonance, an impedance which remains linear, and a greatly expanded bass
extension (down to 17 Hz).
The ‘inverted’ driver positioning is important for achieving correct acoustical timing and coherence. The impulse
response of different drivers varies due to the mass and the electric parameters. For example, a bass driver by
principle reacts much slowly than a tweeter. In the Consequence Ultimate Edition, each driver position physically
compensates for time delays, with a longer listening distance to the tweeters than to the mid and bass drivers.
Therefore, all frequencies reach the listener at exactly the same time. The result is a fascinating transparency and
three-dimensional, point-source imaging.
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 (0)4108 - 4180 - 0, Fax +49 (0)4108 - 4180 - 10,
WEEE-Reg.-Nr. DE 77987307, CEO: Wilfried Ehrenholz, Amtsgericht Tostedt HRB 3346, Ust-Id-Nr. DE 114 960 879, St.-Nr. 15 200 40773,
info@dynaudio.com, www.dynaudio.com
Home Systems I Professional I Automotive I Multimedia
Product Information Consequence UE
In such an advanced five-way-concept it is necessary that every driver operates within a
dedicated, limited bandwidth. In order to achieve the perfect overall frequency balance without
the need for complex crossover filtering, Dynaudio precisely shaped the driver front plates and
rings in countless development stages, accurate to a micrometer, factoring in the individual driver
parameters. In an elaborate and time-consuming process, all driver basket rings and even each
single screw are plated in either Chrome or real Gold.
The Variovent system improves the sound quality in the upper bass and midrange. Two
Variovent openings are implemented into the mid cabinet section and work as defined air flow
resistors in order to reduce resonance. Dynaudio already used Variovent cabinets since the very
beginning and therefore has achieved a great advance in this field.
The 30cm bass driver is a completely new development – a special long-throw construction
with a large voice coil and a huge magnet system. The Consequence Ultimate Edition's upper
bass cabinet and the bass driver both have the dimension of a substantial subwoofer – but with
even better performance thanks to the advanced Vented Compound system, itself consisting of a
second 30 cm bass driver and an extra-ordinarily large bass reflex system. The tonal result is a
low-bass performance with unrivalled precision and depth, at a level of quality that no other
loudspeaker has achieved.
The crossover uses the most advanced components in an unparalleled PCB layout. Designed
for highest signal purity and lowest electromagnetic interference, the crossover is divided into
three PCB sections and consists of unique high frequency film resistors, special flat wire copper
coils, polypropylene capacitors, ceramic resistors mounted onto a metal plate for absolute
temperature stability, and other components of the highest-quality. For ideal amplifier
compatibility, an impedance equalisation circuit is included. The largest crossover board is
mounted onto a dedicated CNC-machined compartment of the wooden base plate in order to
further reduce mechanical resonance. The crossover is wired to the midrange drivers and
tweeters exclusively with Dynaudio Ocos loudspeaker cable.
The Cabinet is designed in reference to the original Consequence model but is in fact an
all-new construction with 25% more cabinet mass than the original model. It is made of multilayered low resonance HDF panels with an overall thickness of 32 mm. The design is
constructed of three modules plus a special base-plate in order to avoid mechanical interference
of the individual drive units and of the crossover. The mid cabinet section is decoupled by
special dampers between the upper bass cabinet and the base plate. This advanced cabinet
design allows each driver to perform at its best and is one of the many secrets of the
Consequence Ultimate Editions' unparalleled sound quality.
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 (0)4108 - 4180 - 0, Fax +49 (0)4108 - 4180 - 10,
WEEE-Reg.-Nr. DE 77987307, CEO: Wilfried Ehrenholz, Amtsgericht Tostedt HRB 3346, Ust-Id-Nr. DE 114 960 879, St.-Nr. 15 200 40773,
info@dynaudio.com, www.dynaudio.com
Home Systems I Professional I Automotive I Multimedia
Product Information Consequence UE
Technical Specifications
Sensitivity (2.83 V/1 m):
85 dB
IEC Long Term Power Handling:
> 400 watts
Impedance, Nominal:
Frequency Response:
4 ohms
(+/- 3 dB)
17 Hz – 30 kHz
Internal Cabinet Volume:
145 litres
Bass Principle:
Vented Compound, 5 way
Weight:
114 kg
Dimensions (W x H x D):
430 x 1330 x 630 mm
Crossover Frequencies:
350 Hz, 1350 Hz, 3 kHz, 13.5 kHz
Crossover Slope:
Woofers 12 dB/octave; Low Midrange 6 & 6 dB/octave;
Midrange 6 & 6 dB/octave; Tweeter 6 & 6 dB/octave;
High Tweeter 12 dB/octave
Remarks:
Super tweeter:
• 21E² Consequence: Esotar², 21mm soft dome
• Pure aluminium wire voice coil
• Neodymium magnet system, magnetic fluid, rear chamber
Tweeter:
• 28E² Consequence: Esotar², 28mm soft dome
• Pure aluminium wire voice coil
• Neodymium magnet system, magnetic fluid, rear chamber
Midrange:
• 52E Consequence: Esotar, 52mm soft dome
• Pure aluminium wire voice coil
• Magnetic fluid, rear chamber
Mid-woofer:
•
•
•
•
Woofers:
• 300E Consequence: Esotar, 30cm woofer in die cast aluminium chassis
• 75mm, pure aluminium wire, long throw voice coil, wound on aluminium former
• Woofers are arranged in a vented compound system
Crossover:
• Capacitors with low loss dielectric
• Zero compression resistors
• Air coils
Cabinets:
• 22mm MDF with internal 10mm damping plates
• Cabinets and base mounted with vibration damping rubber
170E Consequence: Esotar, 17cm woofer in die cast aluminium chassis
One piece moulded MSP cone
75mm pure aluminium wire voice coil wound on aluminium former
Mounted in Variovent cabinet
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 (0)4108 - 4180 - 0, Fax +49 (0)4108 - 4180 - 10,
WEEE-Reg.-Nr. DE 77987307, CEO: Wilfried Ehrenholz, Amtsgericht Tostedt HRB 3346, Ust-Id-Nr. DE 114 960 879, St.-Nr. 15 200 40773,
info@dynaudio.com, www.dynaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising