XPP-5410G - Paralos Tech SA

XPP-5410G - Paralos Tech SA
PRODUCT DATA
XPP-5410G
Intrinsically Safe Permissible Penlight
MARKET APPLICATIONS
Hazardous work environments, industrial, automotive, law enforcement, fire & rescue
DESCRIPTION
This non-rechargeable penlight is cETLus, ATEX, IECEx and MSHA listed Intrinsically Safe Permissible. It is ultra-compact
and super slim with a powerful light output designed to illuminate very tight spaces. The tail-cap switch provides
momentary or constant-on functionality. Power comes from 2 AAA premium batteries (included).
CASE MATERIAL
DIMENSIONS
Engineered Polymer - Green
WEIGHT
LENS
LIGHT SOURCE
Weight: 1.9 oz. (54 g) with batteries installed
LIGHT OUTPUT
ON/OFF
RUN-TIME
BATTERY
30 lumens
FEATURES
• cETLus, ATEX, IECEx and MSHA listed Intrinsically Safe
Permissible
• CREE® LED technology – 50,000 + hours LED life
• Momentary or constant-on flashlight
• Sharp focused beam for illuminating tight spaces
• Engineered polymer housing
• Non-slip grip
• Single body switch
• Waterproof
• Impact & chemical resistant
• Built-in pocket/belt clip
• Includes 2 premium AAA alkaline batteries
WARRANTY
Limited Lifetime Warranty • Includes the LEDs, housing and lenses. Rechargeable batteries, chargers, switches,
electronics and included accessories are warranted for a period of two years with proof of purchase. Disposable,
non-rechargeable batteries are excluded from this warranty. Normal wear and failures which are caused by accidents,
misuse, abuse, faulty installation and lightning damage are also excluded.
Length: 5.8 inches (147 mm) • Head Diameter: 0.9 inches (23 mm) • Handle Diameter: 0.7 inches (18 mm)
Unbreakable polycarbonate with scratch resistant coating
Flashlight: CREE® LED Impervious to shock with a 50,000 hour lifetime
Single Tail-Cap Switch - Momentary or Constant-on Flashlight
18 hours
2 Premium alkaline AAA batteries (included)
APPROVALS
Permissible XPP-5410 Flashlight Assembly
APPROVAL No. 20-A140006-0
TESTED FOR INTRINSIC SAFETY IN METHANE-AIR MIXTURES ONLY
WARNINGS: The Model XPP-5410 is MSHA approved for use with Energizer (Type E92),
two Energizer (Type EN92), and Duracell (Type MX2400), Duracell
(PC2400), and Duracell (EN92) batteries only. Replace the batteries in
fresh air only and replace all batteries at the same time. Do not mix
batteries from different manufacturers or of different types. The Model
XPP-5410 must not be opened in area where permissibility required.
40m
30
18h
2m
107cd
CLASS I DIV 1 GRPS A-D T3
CLASS II & III DIV 1 GRPS E-G T135C
CLASS I ZONE 0 AEx ia IIC T3 Ga
CLASS I ZONE 0 Ex ia IIC T3 Ga
ID 4001184
I M 1 Ex ia op is I Ma
INTRINSICALLY SAFE
II 1 G Ex ia op is IIC T3 Ga
SECURITE INTRINSEQUE
Ex ia op is I Ma
Ex ia op is IIC T3 Ga
Intertek ITS 13 ATEX27839X
IECEx ITS 14.0036X
ž&”7DPE”ž&
1.5V/Cell AAA Alkaline
0359
1m
Designed in USA, manufactured in China at a ISO-9001 certified Bayco facility.
Conforms to:
ANSI/UL STD 913, ANSI/UL
60079-0, ANSI/UL 60079-11
ANSI/ISA 60079-26
Certified to:
CAN/CSA STD C22.2 No 157
CAN/CSA STD C22.2 No 60079-0
CAN/CSA STD C22.2 No 60079-11
CSA STD C22.2 No 25
PDS_XPP-5410G_150420_A
Bayco Products, Inc. • 640 S. Sanden Blvd • Wylie, TX 75098 • 800.233.2155 • www.mynightstick.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising