Forefront Dermatology - LayneCo Construction Services

Forefront Dermatology - LayneCo Construction Services
Project Specifications
Interior Finish Improvements for:
Forefront Dermatology
8567 Watson Road
St. Louis, Missouri 63119
Bid & Permit Issue
March 1, 2017
#2 Daniel Drive ■ O’Fallon, Missouri 63366 ■ 314.640.6212 ■ baalmanarchitects.com
Page 2 of 2
Table of Contents
1. Door Hardware Specifications
2. Product Specifications including:
a.
Bogen Amplifier
b.
Bogen Attenuatror
c.
Houva Phototherapy Photo Booth with Pre-Installation Requirements
d.
Hyfrecator Electrosurgical Unit
e.
Lanier MP301SPF Multifunction B&W Copier/Printer/Fax/Scanner
f.
Lanier MP C306 Multifunction Color Copier/Printer/Fax/Scanner
g.
Copier Dimensional Sketch for Clearances
h.
Leica CM1520 Cryostat Biolab System
i.
Linistain Automatic Slide Stainer
j.
Midmark M9 & M11 Ultraclave
k.
Ritter by Midmark 255 LED Procedure Light
l.
Dayton Premium Stainless Steel Single Bowl Top Mount Sink
m. T&S Brass and Bronze Works Faucets
n.
Nevin Laboratories Eyewash Fountain
o.
Uline Paper Towel Dispenser
p.
Uline Soap Dispenser
q.
Henry Schein Sharps Disposal
r.
Henry Schein Glove Box Holder
s.
Quarry Selection - Grand Rapids, MI - Cabinet Photos
t.
Quarry Collection – Formica Meal Revel Option
u.
Safco Rotary Magazine Display Rack
110 Reller Drive ■ Old Monroe, Missouri 63369 ■ 314.640.6212 ■ ConfluenceDesignGroup.com
Door Hardware
1. Provide door hardware per the following:
a. Locks and Latches. Hager Companies – 3400 Series, Archer Lever or equivalent.
b. Hardware Finishes 626 / US26D Brushed Satin Chrome.
c. Cylinders/Keying: Manufacturer’s standard tumbler type, 6-pin. Hager Companies,
Schlage, Sargent or equivalent.
d. Door Closers: Hager Companies 5100 Series, 689 Finish; LCN 4040 Series or
Sargent 281 Series.
e. Wall Stops: Hager Companies Convex 232W / Concave 236W or equivalent.
#2 Daniel Drive ■ O’Fallon, Missouri 63366 ■ 314.640.6212 ■ baalmanarchitects.com
Classic Series Public Address Amplifiers
C10 & C20 Models
Installation and Use Manual
© 2009 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-5978-01C 1106
NOTICE: Every effort was made to ensure that the information in this guide was complete
and accurate at the time of printing. However, information is subject to change.
WARNING: To reduce the risk of Fire or Electric Shock, Do Not Expose this apparatus
to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases shall be placed on the apparatus.
WARNING: Only connect unit to AC mains outlet providing protective earthing connection.
NOTE: Mains plug is used as disconnect device from the mains and shall remain readily
accessible and operable.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET, OR IN
ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT THE RISK
OF SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Always follow these basic safety precautions when installing and using the unit:
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean unit with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wide blade, or the third prong, are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when not used for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE ANY FRONT/BACK COVERS
OR PANELS. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions.
2
Contents
DESCRIPTION ....................................................................................................................4
FRONT PANEL....................................................................................................................4
REAR PANEL ......................................................................................................................5
INSTALLATION..................................................................................................................5
Power and Grounding ........................................................................................................................5
Input Connections ..............................................................................................................................5
Microphone Connections ..............................................................................................................5
Microphone Precedence ................................................................................................................5
AUX ................................................................................................................................................5
TEL ..................................................................................................................................................5
Output Connections ..........................................................................................................................6
Speakers, General ..........................................................................................................................6
OPERATION ........................................................................................................................6
POWER ..........................................................................................................................................6
MIC1, MIC2 ..................................................................................................................................6
AUX ................................................................................................................................................6
TEL ..................................................................................................................................................6
VOX SENS ......................................................................................................................................6
Microphone Precedence ................................................................................................................6
TREBLE............................................................................................................................................6
Overload Protection........................................................................................................................6
ACCESSORIES ....................................................................................................................7
TECHNICAL SPECIFICATIONS ......................................................................................7
LIMITED WARRANTY ....................................................................................Back Cover
3
Description
Bogen Models C10 and C20 public address amplifiers are rated at 10 and 20 watts, respectively, and are listed to
UL Standard 60065 for US and Canada.
The amplifiers accommodate low-impedance microphones and high-impedance auxiliary sources. A front panel
selector switch offers a choice of either two low-impedance balanced microphones (MIC1, MIC2), or one microphone and one auxiliary input (MIC1, AUX). The AUX input can be muted when a customer-supplied SPST normally open switch is used for microphone precedence. Independent volume controls and a treble control, for tonal
balance, are provided.
Balanced and unbalanced outputs are provided for 4-, 8-, and 16-ohm speakers and for 25- and 70-volt constant
voltage systems. An accessory transformer, Bogen Model WMT1A, can be installed to provide input- and outputmatching to a telephone line.
The amplifiers operate from a 120~, 60Hz source. A thermostat enclosed in the power transformer protects the
unit against overloads.
The amplifier also accommodates a transformer-balanced TEL/page input with VOX detector for muting the AUX.
Front Panel
1. MIC2/AUX Mode Switch
Switch selects either the MIC2 or AUX connection as the active input.
2. MIC1 Level Control
Individual level control for dedicated microphone input.
3. MIC2/AUX Level Control
Individual level control for a dedicated microphone input or for an auxiliary input depending on input mode selected.
4. Treble Control
Controls the amount of attenuation to treble frequencies above 10 kHz.
5. Power
AC Power switch. Illuminates when ON.
4
Rear Panel
1. Amplifier Output
Screw terminal strip containing all available speaker outputs.
2. Mute Input
Screw terminal input for microphone precedence.
3. MIC1/MIC2
Screw terminal input for Lo-Z balanced microphone signal.
4. AUX Power
A grounded, unswitched AC convenience receptacle with 300W maximum capacity is provided for external equipment.
5. VOX SENS Control
Variable control for adjusting the TEL input signal level trigger point for automatic muting of the AUX input.
6. TEL Volume Control
Adjusts the telephone paging level.
7. AUX Input
RCA unbalanced, high-impedance input (AUX is switch-selectable with MIC2).
8. TEL Input
Screw terminal input for 600-ohm balanced telephone signal.
Installation
Power and Grounding
The AC line cord has a three-prong plug which must be plugged into a three-wire grounded 120-volt, 60 Hz outlet.
Note: It is important to ground the amplifier properly.
Input Connections
Microphone Connections
Two low-impedance balanced microphones may be connected simultaneously to the corresponding screw terminals on the rear panel of the amplifier.
Microphone Precedence
A built-in circuit provides microphones’ precedence over the AUX channel. For this function, a customer-supplied
normally-open SPST switch must be connected to the MUTE terminals. When the contacts are closed, the microphone will have precedence.
AUX
The AUX inputs may be used for any signal source having a line-level (greater than 85mV) output.
TEL
A balanced isolating transformer input for a telephone line is provided. A 600-ohm telephone line may be connected
to the TEL terminals.
5
Output Connections
Speakers, General
The amplifier may be used with most conventional speaker systems. Connect one speaker lead to the screw terminal that corresponds to the total impedance or proper voltage of the speakers used in the system and the other
lead to the COM terminal. For balanced output lines, remove the link between the COM and GND output terminals. Class 2 wiring may be used.
Operation
POWER
The front panel ON/OFF switch applies power to the amplifier.
MIC1, MIC2
For two microphone inputs, the MIC2/AUX selector switch should be in the MIC2 mode. The MIC controls are
used to adjust the volume of the microphone inputs. Rotate the controls clockwise to increase volume and counterclockwise to decrease it. Turn the controls to the minimum counter-clockwise position if the inputs are not
used.
AUX
For one auxiliary input, the MIC2/AUX selector switch should be in the AUX position. The AUX control is used
to adjust the volume of the auxiliary input. Rotate the control clockwise to increase volume and counterclockwise
to decrease it. Turn the control to the minimum counter-clockwise position if the input is not used.
TEL
The TEL volume control on the rear panel adjusts the telephone paging level. It does not affect the microphone
level. Rotate the control counter-clockwise to decrease the level. Rotate the control clockwise to increase the
level. Turn the control to the minimum counter-clockwise position if the input is not used.
VOX SENS
The VOX SENSitivity control should be set so that only the desired TEL signal is above the threshold level, while
noise and unwanted signal is below it. When an input signal (such as a voice) is detected, the AUX channel will be
muted. To adjust the sensitivity of the circuit:
1. Rotate the control fully clockwise. While making a page announcement and talking at a low level, the sound
should not be choppy nor missing parts of words. If it is choppy, or if intelligibility is poor, rotate the control counter-clockwise to the point where the sound is clear and crisp (but not to the maximum counterclockwise position).
2. If the background music shuts down when no page is in progress, rotate the control clockwise until the
music is restored.
Microphone Precedence
Muting the AUX channel can be accomplished with a customer-supplied normally-opened SPST switch, which must
be connected to the MUTE terminals. When the contacts are closed, the microphone will have precedence over
the AUX input.
TREBLE
Use the TREBLE control to adjust the tonal balance of the amplifier output. Rotated fully clockwise there is no
effect. Rotate counter-clockwise to attenuate the TREBLE of the audio.
Overload Protection
The amplifier output is protected against overload and shorted speaker lines by an electronic shut down circuit and
a thermostat enclosed in the power transformer. If the protection operates, the amplifier will have no output. Set
the Power switch to off and wait a reasonable amount of time for the protection to reset. If the protection trips
again, have the problem investigated by a qualified technician.
6
Accessories
WMT1A - Line-Matching Transformer
• Hi-Z, 10k-ohm primary impedance
• Lo-Z, 600-ohm secondary impedance, balanced with center tap
• Matches high-impedance unbalanced or low-impedance balanced signals
• Jumper selection allows line level signal to microphone level signal conversion
RPK35B - Rack Panel Kit
• RPK35B adapts Classic Series amps (Models C10 and C20) for 19" rack mounting, 2 rack spaces (3-1/2")
• Heavy gauge steel construction
WMK1 - In-Wall Mounting Kit
• Cabinet fits between standard 2 x 4’s on standard 16"
• Controls are accessible via a tilt-open door
• Heavy gauge steel construction
Technical Specifications
Power Output (RMS)
C10:
C20:
Distortion
Frequency Response
Hum and Noise
MIC Input:
AUX Input:
TEL Input:
Input Sensitivity
MIC Lo-Z Balanced:
AUX:
TEL:
Outputs
Output Connections:
Input Connections:
MIC/TEL:
AUX:
Controls:
Tone Control:
Power Requirements:
C10:
C20:
Dimensions:
Shipping Weight
C10:
C20:
10W
20W
Less than 1% @ Rated Power Output
70 Hz - 16 kHz (±1 dB)
(20 Hz to 20 kHz)
55 dB below rated output
70 dB below rated output
70 dB below rated output
600 µV
85 mV
75 mV
4, 8, 16 ohms, 25V, and 70V
Screw terminal strip
Lo-Z screw terminals
RCA jack
MIC1, MIC2/AUX (switch selected), TREBLE, VOX, TEL
TREBLE: -10 dB to 0 dB @ 10 kHz
120V~, 60Hz
38W
50W
11-3/8" W x 2-7/8" H x 7-3/8" D (both models)
6 lb.
6 lb.
7
Limited Warranty; Exclusion of Certain Damages
The Bogen Classic Series Amplifiers are warranted to be free from defects in material or workmanship for two (2)
years from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal
installation and use, becomes defective will be repaired or replaced by Bogen, at our option, provided the product is
shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. The
product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been
subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired
or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND
THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND
EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen’s liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF
PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE,
SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from State to State.
7/22/2008
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Attenuators
for 25V/70V
Speaker Line
Models AT10A, AT35A
Description
Features
The AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled
from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can
handle speaker loads of up to 10W and the AT35A can handle speaker loads of up to 35W. Volume
reduction takes place in 3 dB increments except for the two lowest settings, which provide 6 dB reduction
increments. These rugged attenuators have 10 levels of sound control, plus an off setting.
• Adjusts loudspeaker output levels on 25V
and 70V systems
• 2 models control up to 10-watt and 35-watt
speaker systems
• 10 attenuation steps and an off setting
• Attenuation in 3 dB increments except for two
lowest settings, which provide 6 dB reduction
increments
• Mounts in standard electrical box, single (AT10A)
or double (AT35A)
• Simple connections
Technical
Specifications
Model:
Speaker Types:
Power Rating:
Gang Box:
Dimensions:
Product Weight:
Architect
& Engineer
Specifications
AT10A
AT35A
25V & 70V
25V & 70V
10 Watts
35 Watts
Single
Dual
2-3/4" W x 4-1/2" H x 2-3/4" D
4-5/8" W x 4-5/8" H x 3" D
13 oz.
14 oz.
The speaker line attenuator shall be a Bogen model
(specify AT10A or AT35A), and shall permit setting
the output level at loudspeakers on a 25V or 70V
line without altering the amplifier volume setting.
The attenuator shall provide a choice of 10 stops
and an “off” position, and shall be capable of control-
ling up to 10-/35-watt speaker systems. The attenuator shall measure (2-3/4" W x 4-1/2" H x 2-3/4" D
for AT10A or 4-5/8" W x 4-5/8" H x 3" D for AT35A)
and weigh (13 oz. for AT10A or 14 oz. for AT35A).
Specifications subject to change without notice.
© 2005 Bogen Communications, Inc.
54-8023-33C 1202
®
HOUVA II
with PhotoSense® Technology
SPECIFICATIONS
ELECTRICAL RATING
• 120/240 volt, 3 wire, single phase, solid
neutral, 50/60 hertz. A fourth wire (green)
is required to be attached to an isolated
ground.
• 30 amperes per leg
• 10-foot, 4 conductor #10 AWG power
cable included with each unit
• Optional international base 220-240 volts,
50/60 hertz
Note: For other supply voltages and
systems, including international use,
contact National Biological Corporation.
®
HOUVA II
Phototherapy System
with PhotoSense® Technology
ELECTRICAL CERTIFICATION
• Certified to the Canadian Standards
Association and CMDCAS
• National Biological Corp. is certified to
ISO-13485
85”
DIMENSIONS
46”W x 49”D x 85 “H
WARRANTY
• All parts (excluding lamps) carry a 5-year,
free replacement warranty. All labor
carries a 5-year, “NO CHARGE” warranty
from date of installation.
• Extended Warranties also available.
• Lamps warranted for 90 days.
Your Best Value!
Houva II® represents the pinnacle of phototherapy
technology from the leader in phototherapy devicesNational Biological Corporation.
♦ PhotoSense® Exposure Control for precise treatment
management
♦ Unsurpassed Safety Features including “watchdog”
failsafe circuitry
♦ Six Lamp Configurations including 311nm Narrowband
and UVA-1
♦ Ongoing Unsurpassed Commitment to Service
featuring our “Total Support” Warranty and our toll-free
help line
♦ External Measuring devices included at no additional
charge (may be used with all phototherapy equipment)
♦ Complete line of phototherapy accessories in stock at
all times
All products shipped F.O.B. Beachwood, OH.
LAMPS
• Option 1: 48 TL100W/01 FS 72
311-NB UVB lamps
• Option 2: 24 F72T12 BL/HO UVA lamps;
24 TL100W/01 FS 72 311-NB UVB lamps
• Option 3: 12 FSX72T12/UVB/HO BB UVB
lamps; 36 TL100W/01 FS 72
311-NB UVB lamps
• Option 4: 48 UVA-1 F72T12BL9/HO lamps
• Option 5: 48 F72T12 BL/HO UVA lamps
• Option 6: 36 F72T12 BL/HO UVA lamps;
12 FSX72T12 UVB/HO BB UVB lamps
National Biological uses only new Philips TL
Brand Narrowband UVB Lamps
S.E.E. The Light!
23700 Mercantile Road
Beachwood, OH 44122
(800) 338-5045 Fax: (216) 765-0271
Email: info@PhototherapyExperts.com
Web: www.PhototherapyExperts.com
Safe, Effective & Economical
HII1110
HOUVA II
®
Non-UV transmitting
viewing window
to monitor
patient during
treatment
Houva II® Features
♦
♦
♦
♦
♦
♦
♦
♦
♦
Utilizes failsafe “watchdog” circuitry which
automatically shuts off the device if it senses a
potential malfunction
ON/OFF key switches for safety
NON-UV-transmitting viewing window for patient
comfort
Exclusive perimeter flow ventilation for patient
comfort
Full reflector panels to maximize lamp output
Raised floor for proper treatment of lower leg
Hand rails for patient safety
Non-skid floor mat for patient safety
Sturdy screen protection for lamps
Hand rails for
patient safety
Safety screens allow
for maximum energy
output and snap out
for easy lamp
replacement
Featuring
PhotoSense® Exposure Control
For Precise Treatment Management
Because the Houva II® features separate
UVA and UVB PhotoSense® Exposure
Controls and UVA and/or
UVB measuring devices,
you and your patients
benefit from precise
treatment management
regardless of which
regimen you choose. As
an added safety
measure, you may preset
a maximum exposure
time to minimize the
chance for overexposure.
Exclusive perimeter flow
ventilation for increased
patient comfort
Raised floor for proper
treatment of lower legs
Houva II® Lamp Comparison Chart
UVA
The National Biological Advantage
•
•
•
•
•
•
An experienced staff of full-time engineering professionals well
versed in UV technology
On-site installation and training on Houva II® operation and benefits
Service performed on your premises
Thorough testing, inspection, and documentation of every device
and component by our Quality Assurance staff
Quality-built with care and attention to detail
Five Year “Total Support” with the most comprehensive warranty in
the industry
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
—
24
—
—
48
36
UVA-1 BB UVB
—
—
—
48
—
—
—
—
12
—
—
12
NB-UVB*
Measuring
Devices
48
24
36
—
—
—
NB-UVB
UVA and NB-UVB
UVB/NB-UVB
UVA
UVA
UVA and UVB
Houva II® Comparison Chart
* Recent research has shown Narrowband UVB to have a therapeutic
advantage over Broadband UVB in the treatment of psoriasis. Studies have
shown faster clearing and more complete disease resolution based on the
erythema response to NB-UVB treatment being more intense and persistent
compared with BB-UVB. These benefits are outlined in numerous published
articles and studies. (Articles available upon request.)
The Phototherapy Experts
23700 Mercantile Rd, Beachwood, OH 44122
Phone: (216) 831-0600 • (800) 338-5045
Fax: (216) 765-0271
E-mail: nbc@natbiocorp.com
NBC HOUVA UV SYSTEM PRE-INSTALLATION REQUIREMENTS
A: MODELS:
HOUVA II
UAB-001...(36 UVA, 12 UVB Lamps)
UAB-102...(24 UVA, 24 UVB NB Lamps)*
UVA-003...(48 UVA Lamps)
UVB-100...(36 UVB NB, 12 UVB Lamps)*
UVB-101...(48 UVB NB Lamps)*
HOUVA III
UHU-312...(24 UVA, 24 UVB NB Lamps)*
UHU-318...(48 UVB NB Lamps)*
• (UVB NB= Ultra Violet B Narrow Band)
B: ROOM SIZE & UNIT POSITION:
6’Wx6’Dx8’H Minimum (Contact NBC For Approval Of Any Smaller Rooms)
Flat Wall (Along Any Sizeable Straight Wall)
Room Corner (Well Suited For Smaller Space Utilization)
Room And Unit Doors Need Sufficient Area To Travel Unimpeded
Patient Disrobing/Dressing Area Should Be Considered
C: ELECTRICAL: (All Components Within The Unit Operate At 120 Volts)
240/120 Volt 30 Amp (3-Wire AND Ground Supply)
(Two Legs Of 208 Volt Three-Phase Are Acceptable)
• Consisting Of...
Two 30 Amp Capacity Hot Supply Lines (Different Supply Phases)
One Neutral Supply Line
One Equipment Grounding Conductor
Optional: One Additional Dedicated/Isolated Ground Supply Line
• Local Electrical Codes Takes Precedence
D: TERMINATION: Hard Wire Connection
A SAFETY DISCONNECT BOX (Required): In Room, Wall Mounted
• Hard Wired Termination Only
• Non-Fused Or 30 Amp Fused Acceptable
• Lever/Rocker Operation, Or Pull Block Disconnect
• Located 3’ To 4’ To Right Of Installation Location Center
• At A Height Of 4 ½’ To 5 ½’
• Strain Relief, 10’ Flex Conduit And Wire Exits From The Right Hand Side Of Unit
• In Room Main/Sub Panel Is Sufficient If Local Electrical Code Acceptable
(Example List Of Electrical Disconnect Boxes Provided Upon Request)
E: VENTILATION: This Device Does Generate Heat
Special Ventilation Is Not Required (Note However):
• Need for 6” Unimpeded Space Surrounding The Unit
• 5000 Watts Of Energy Is Generated When Running
• 17000 BTU/HR Is Generated (Duty Cycle Is Use Driven)
• Cooler Air Enters At Base Perimeter
• Heated Air Exhausts Through Top Cap Perimeter
• Ambient Temperature Rise Is Dependent On Room Size
• Ceiling Panels Replaced With Grids Can Provide Natural Convection
Form HII-PIR 07/12
The Phototherapy Experts
23700 Mercantile Rd, Beachwood, OH 44122
Phone: (216) 831-0600 • (800) 338-5045
Fax: (216) 765-0271
E-mail: nbc@natbiocorp.com
NBC HOUVA UV SYSTEM ELECTRICAL CONFIRMATION
COMPLETE AND FAX TO: NBC SERVICE DEPARTMENT, FAX: 330-425-9614
FROM: ______________________________
______________________________________
______________________________________
______________________________________
Phone: _______________________________
SITE: ________________________________
______________________________________
______________________________________
______________________________________
Phone: _______________________________
1: MODELS: (All Listed Models Have The Same Electrical Requirements)
UAB-001...(36 UVA, 12 UVB Lamps)
UAB-102...(24 UVA, 24 UVB NB Lamps)*
UVA-003...(48 UVA Lamps)
UVB-100...(36 UVB NB, 12 UVB Lamps)*
UVB-101...(48 UVB NB Lamps)*
UHU-312...(24 UVA, 24 UVB NB Lamps)*
UHU-318...(48 UVB NB Lamps)*
* (UVB NB= Ultra Violet B Narrow Band)
2: ELECTRICAL: (All Components Within The Unit Operate At 120 Volts)
240/120 Volt 30 Amp (3-Wire AND Ground Supply)
(Two Legs Of 208 Volt Three-Phase Are Acceptable)
• Check List For Electrical...
Y
N
Two 30 Amp Capacity Hot Supply Lines (Different Supply Phases)
Y
N
One Neutral Supply Line
Y
N
One Equipment Grounding Conductor
Y
N
Optional: One Additional Dedicated/Isolated Ground Supply Line
• Local Electrical Codes Takes Precedence
3: TERMINATION: Hard Wire Connection
Y
N
DISCONNECT BOX (Required): In Room, Wall Mounted
(Existing In Room Main/Sub Panel Is Sufficient If Local Electrical Code Acceptable)
• Hard Wired Termination Only
• Non-Fused Or 30 Amp Fused Acceptable
• Lever/Rocker Operation, Or Pull Block Disconnect
• Located 3’ To 4’ To Right Of Installation Location Center
• At A Height Of 4 ½’ To 5 ½’
• Local Electrical Codes Takes Precedence
(Example List Of Electrical Disconnect Boxes Provided Upon Request)
4: MEASUREMENTS:
LINE 1 (L1) - LINE 2 (L2)
LINE 1 (L1) - NEUTRAL (N)
LINE 2 (L2) - NEUTRAL (N)
Form HII-PIR 07/12
________VOLTS
________VOLTS
________VOLTS
LINE 1 (L1) - GROUND (G)
________VOLTS
LINE 2 (L2) - GROUND (G)
________VOLTS
NEUTRAL (N) - GROUND (G) ________VOLTS
MP 301SPF
Multifunction B&W
Copier
Printer
Facsimile
Scanner
MP 301SPF
31
ppm
monochrome
Affordable, productive multitasking at your
convenience
Raise your expectations — and improve your productivity. The LANIER MP 301SPF offers advanced
®
capabilities to streamline workflow and reduce total cost of ownership. Use it to produce fast, black-and-white
output, share electronic documents, protect sensitive information and optimize IT resources cost-effectively.
With its unique combination of powerful, reliable performance and intuitive management in a compact design,
it offers incredible value as the primary multifunction device in an office or as part of an integrated Lanier
Managed Document Services (MDS) strategy throughout the enterprise. Expect the MP 301SPF to exceed
your low-volume, desktop multifunctional product demands without compromising space or the budget.
Choose your own efficiency
Loaded with customizable features in a sleek, desktop design, the
MP 301SPF makes everyday tasks more accessible. The tiltable, 4.3" color
touch-panel display and an optional external keyboard enable users to deftly
manage every job with ease. Four frequently used functions are available
directly from the Home Screen, so users can select specific workflows quickly
to save steps and help maximize productivity. In addition, users can return
to the Home Screen at any time with simple, one-touch operation.
Perform any task, anywhere
Move mobile users forward, while improving workflow, with innovative
electronic media capabilities. Users can insert a USB memory or SD card
into a slot on the MFP control panel to preview and print output remotely,
without a PC. Users can also work from a mobile device, such as a smart
phone or tablet, to locate the MFP quickly and print output without the
use of utilities, software or drivers.
Discover the power of versatility
The MP 301SPF enables users to handle a wide range of demanding tasks
with ease. It generates up to 31 pages per minute for outstanding throughput.
Storage capacity can be expanded to 1,350 paper sheets to support longer,
uninterrupted runs. Its 8" x 14" platen is perfect for copying, scanning and
faxing oversized documents, including booklets, catalogs and other media.
In addition, when the optional hard drive is installed the Document Server
offers convenient access for up to 3,000 frequently-used documents.
A sleek, compact MFP streamlined for the
desktop—and your workflow
Sustainable savings and productivity
Backed by Lanier’s long-standing commitment to energy- and
environmentally-friendly solutions, the MP 301SPF offers a host of
innovative features to reduce total cost of ownership. With the
Eco-Friendly Indicator, users can check usage status for individual
employees and foster more environmental awareness and responsible
paper consumption. With its class leading energy efficiency, based on
the low Typical Energy Consumption (TEC) value of only 1.5 kWh/week,
combined with a short recovery time of less than 10 seconds from
Sleep Mode, high speed duplexing and enhanced first copy out time,
the system provides a quicker availability and saves more energy.
Sophisticated scanning and faxing
Capture black-and-white or full-color originals quickly and distribute
them electronically for faster, more affordable communications. Users
can retrieve numbers and addresses from LDAP-registered directories
and eliminate costly delivery charges by sending documents instantly
via Scan-to-Email/Folder/SD/USB. One-sided and two-sided originals
can be scanned in a single job using Enhanced Batch Scan to
boost productivity. Plus, a powerful Super G3 fax modem, IP (T.38)
and Internet (T.37) faxing minimize bottlenecks while eliminating
transmission costs.
Complex management tasks simplified
With exceptional compatibility and easy-to-use utilities, the MFP
automates processes and optimizes workflow. Users can take
advantage of Lanier’s services-led platform to integrate customized
applications and software solutions to boost productivity and help
reduce operating costs. Shortcuts, system and application settings
and more can be exported to an SD card for installation on another
MP 301. Workflows can be customized from the desktop and
accessed within moments for fast walk-up operations on the
most comprehensive jobs.
Lanier MP 301SPF
S Y s t e m s p e c i f i c at i o n s
General Specifications
Configuration
Scanning Element
Printing Process
Printer
Desktop Multifunctional Product (MFP)
Flatbed with CCD array image-sensing
element
Laser beam scanning/marking & electrophotographic printing
1GB. (RAM) standard
Up to 31 ppm (Letter)
Standard Features
CPU
RM7035C – 533 MHz
Memory Capacity
Standard: 1 GB RAM
Hard Disk Drive
Optional: 128 GB HDD
Page Description Standard: PCL5e/6, Genuine Adobe
LanguagesPostScript 3
Maximum Print Resolution 600 x 600 dpi
Standard Interfaces
Ethernet (RJ-45 network port : 10Base-T/
100Base-TX), USB2.0 Type A and B
Optional Interfaces
IEEE1284, Wireless LAN (IEEE802.11a/b/g),
Giga Ethernet (1000BASE-T), Bluetooth
Network Protocols
TCP/IP (IPv4, IPv6), IPX/SPX (available
with Netware option)
Fonts for PCL 5e/6
45 Roman fonts
Fonts for PS3
136 Roman fonts
Network Operating
Windows XP/Server 2003/Vista/Server
Systems
2008/7; Novell Netware 6.5; UNIX Filters
for Sun Solaris 2.6/7/8/9/10; HP-UX
10.x/11.x/11iv2/11iv3; Red Hat Linux
Enterprise V4, V5, V6; SCO OpenServer
5.0.6/5.0.7/6.0; IBM AIX Version 5.3,
6.1, 7.1; SAP R/3, 3.x or later, mySAP,
ERP2004 or later; Mac OSX 10.2 or later,
Citrix Metaframe XP/ Presentation Server
4, 5/XenApp 5.0, 6.0
Utilities
SmartDeviceMonitor for Admin and Client,
Web SmartDeviceMonitor, Web Image Monitor
Other Printer Features
Media Direct Print (Print from USB/SD) ,
Mobile Driver, Bonjour Support,
Classification Code, Mail to Print , PDF
Direct Print, Sample/Hold/Stored/Locked
Print , Store and Print , Windows Active
Directory Support, DDNS Support,
WSPrinter, PCL resident font adoption,
Tray-Parameter Change from
WebImageMonitor, XPS Support
1
1
®
®
System Memory
Output Speed
(Copy/Print)
First Copy Time
6 seconds or less
Recovery Time to
Less than 23 seconds (from main power
Product Ready Mode switch on)
Less than 10 seconds (from sleep mode)
Copy Resolution
600 x 600 dpi (platen), 600 x 300 (ARDF)
Grayscale
256 levels
Exposure Adjustment
Manual and automatic
Multiple Copies
Up to 99
Document Feeder
Automatic Reversing Document Feeder
(Standard)(ARDF)
Original Capacity
50 sheets (ARDF)
Paper Sizes
Standard Tray: 5.5" x 8.5" to 8.5" x 11"
(A4/ LT/A5/HLT)
Optional Trays: 8.5" x 11" to 8.5" x 14"
(A4/LT/ LG/Folio)
Bypass Tray: 5.5" x 8.5" to 8.5" x 14"
(A6/A5/A4/LT/LG)
Duplex Unit: 8.5" x 11" to 8.5" x 14"
(A4/LT/LG)
Paper Weights
Standard/Optional Trays: 16 – 24 lb. Bond
(60 – 90 g/m )
Bypass Tray: 16 – 42 lb. Bond (60 – 157 g/m )
Duplex Unit: 20 – 24 lb. Bond (60 – 90 g/m )
Exposure Glass
Up to 8.5" x 14"
Input Capacity
Standard: 250 sheets + 100-Sheet
Bypass Tray
Optional: 500 sheets x 1 or 2 Trays
Output Capacity
250 sheets (internal tray)
Paper Types
Plain, Recycled, Colored, Letterhead,
Preprinted, Bond, Card Stock, Prepunched,
Special, Thick*, OHP (Transparency)*
Envelopes*, Label Stock*
Auto DuplexStandard
Zoom
25% to 400% in 1% increments
Preset Reduction and
65%, 78%, 93%, 129%, 155%
Enlargement Ratios
Dimensions (WxDxH)
19.0" x 17.7" x 18.1" (476 mm x
450 mm x 451 mm) – includes ARDF
Weight
57.3 lbs./ 26 kg.
Power Requirements
120V, 60Hz, 8A
Power Consumption
Less than 1,1 kW (max.)
Sleep Mode, 2.8 W (MP 301SPF)
TEC
MP 301SPF – 1.507 kWh/week***
Standard Features
Document Server**, Image Rotation, Auto
Off Timer, Combine Copy, Electronic Sort,
Energy Saver Timer, Photo Mode, Series
Copy, Job Programs (25), User Codes
(8 digits, 1,000 Personal Codes)
2
2
2
*Bypass Tray only.
**HDD option required.
***Typical electric consumption by ENERGY STAR program
MP 301SPF and FAC 57
Cabinet
PDF Encryption, Preview Before
Transmission (TX Preview) , Drop Out Color
Send, Simultaneous Fax and Scan,
Scan-to-Email/SMB/FTP/URL /NCP ,
LDAP Support, TWAIN Scanning
2
1 HDD option required.
Netware option required
2
Fax
Type
Circuit
Resolution
Modem Speed
Compression Method
Scan Speed
Transmission Speed
Memory
Memory Backup
Quick/Speed Dials
Group Dials
User Function Key
Standard Features
ITU-T (CCITT) G3
PSTN, PBX
200 x 100 dpi, 200 x 200 dpi
33.6K – 2,400 bps with Auto Fallback
MH, MR, MMR, JBIG
2.4 seconds (Letter)
Approx. 2 seconds/page (JBIG)
4 MB (approx. 320 pages)
12 hours
200 (2,000 with HDD Option)
10 groups (max. 100 numbers per group
with HDD option)
3 keys
Detection of Misplaced Documents,
Double Check Destination Address, Direct
SMTP, Simultaneous Fax and Scan, Fax
Forward to Email/Folder, Internet Fax
(T.37) , IP Fax (T.38) , LAN Fax, Paperless
Fax , LDAP Support
1
1
1
1
1 HDD option required.
1
1
1 1
HDD option required.
Scanner
31 ipm @ 300 dpi B/W (LT)
21 ipm @ 300 dpi Full-Color (LT)
100 to 600 dpi
Main: 8.5" (216 mm)
Sub: 14.02" (356 mm)
B/W: MH (default), MR, MMR, JBIG2
Full-Color: JPEG
B/W: Text, Text/Line Art, Text/Photo,
Photo, Grayscale
Full-Color: Text/Photo, Glossy Photo,
Grayscale
Standard Interfaces
Ethernet 10BASE-T/100BASE-TX
Optional Interfaces
Wireless LAN (IEEE 802.11a/b/g), Gigabit
Ethernet (1000BASE-T)
File Formats: Single/Multi Page TIFF,
Single/Multi Page PDF, Single/Multi Page
High Compression PDF and Single/Multi
Page PDF/A; Single Page JPEG
Scan Modes Supported Scan-to-USB/SD, Scan-to-Email (POP,
SMTP, TCP/IP) ; Scan-to-Folder (SMB/
FTP/NCP) ; Network TWAIN Scanning;
WSDScanner for Vista
Scanning Speed
Scanning Resolution
Scan Area
Compression Method
Scan Mode
Paper Feed Unit PB1040 (Option)
8.5" x 11" SEF, 8.5" x 14" SEF (A4/LT/LG)
16 – 24 lb. Bond (60 – 90 g/m )
500 sheets x 1 or 2 Trays
Paper Size
Paper Weight
Paper Capacity
2
Additional Options
HDD Option Type 301 (includes HDD overwrite and encryption),
Cabinet, Type FAC57, Cabinet, Type FAC58, IEEE1284 Interface
Board Type A, IEEE802.11a/g Interface Unit Type J, Gigabit Ethernet
Board Type A, Bluetooth Interface Unit Type D, VM Card Type U, File
Format Converter Type E, Browser Unit Type G, SD Card for NetWare
Printing Type I, Unicode Font Package for SAP (1/10/100 License
Packs available), Handset Type C5502, Optional Counter Interface
Unit Type A, Copy Data Security Unit Type F, ACK3400-U Key Board
Security
Quota Setting/Account Limit; SMTP over SSL; Hard Disk Data
Overwrite Security ; Authentication (Windows/LDAP/Kerberos/Basic/
User Code/802.1.x Wired); Encryption (Address Book/Authentication
Password/SSL Communication/S/MIME/IPsec/Locked Print
Password/HDD ); Network Protocol (Port) On/Off; IP Filtering; Copy
Data Security Unit; RAM Based Security when HDD is not installed
1
1
1 Only required with HDD option.
Some features may require additional options.
1
2
MP 301SPF with Optional PB1040
Paper Tray and FAC 58 Cabinet
www.lanier.com
Lanier, Five Dedrick Place, West Caldwell, NJ 07006
Lanier and the Lanier Logo are registered trademarks of Ricoh Company, Ltd. All other trademarks are the property of their respective owners. The content of this document, and the
appearance, features and specifications of Lanier products and services are subject to change from time to time without notice. Products are shown with optional features. While care
has been taken to ensure the accuracy of this information, Lanier makes no representation or warranties about the accuracy, completeness or adequacy of the information contained
herein, and shall not be liable for any errors or omissions in these materials. Actual results will vary depending upon use of the products and services, and the conditions and factors
affecting performance. The only warranties for Lanier products and services are as set forth in the express warranty statements accompanying them.
®
L3350
MP 301SPF with Two Optional PB1040
Paper Trays and FAC 58 Cabinet
MP C306
Multifunction Color
Copier
Printer
Facsimile
Scanner
MP C306
31
ppm
monochrome
and full-color
Put productive performance within your reach
You have important information that can help your business. You even know who you need to
share it with. But can you get it to them when it’s still relevant, and in the format they prefer?
Use the LANIER MP C306 to simplify how you manage information — whether you’re printing,
™
copying, scanning or faxing — so you can work faster and be more productive. Take advantage of
its large, intuitive touchscreen to toggle between jobs with a single swipe. Print up to 8.5" x 14"
documents in compelling color from your smartphone. Create iconic shortcuts for one-touch
workflows. Help protect your work with user authentication, user codes, encryption and more.
Best of all, it’s all within your reach. Because this versatile MFP has one of the smallest footprints
in its class, you can place it anywhere and move as freely as your information does.
• Print up to 31 black-and-white or full-color prints/copies per minute
• Complete more jobs using less space
• Use your personal mobile device to print any time
• Move from one task to the next with a single touch
• Help protect information while preserving energy and reducing operating costs
Simplify big workflows in small spaces
Bring your best ideas closer to your audience
Transition from one job to the next quickly
You’re short on time, not on things to do. So what are you waiting for?
Use the Lanier MP C306 to get information to the right people at the right
time so they can help your business thrive. Get started quickly with firstprint times of only 7.2 seconds. Print up to 31 color pages per minute to
handle almost any type of project with ease. Load up to as many as 1,350
sheets of various-sized and different types of media for fewer interruptions.
Administrative tasks are just as easy. You can automate meter reads, change
system settings, update firmware and more from the desktop, so you can
spend more time running your business and less time running to the MFP.
Streamline how you work with a single touch
Why hunt and peck with bulky keypads when you can use a touchscreen
with a similar look and feel as your personal mobile device? The Lanier
MP C306 has a 10.1" wide Super VGA Smart Operation Panel to let
you copy, print, scan or fax with an interface similar to your tablet or
smartphone. Tap to start an app. Drag and drop to change icon layout.
Flick to scroll through pages, such as a listing of email addresses. Do you
prefer our legacy Lanier interface? No problem. You can still use it. We
simply replaced the hard keys with a soft keypad.
Collaborate wherever you are
When it comes to being productive, you’re not out of luck just because
you’re out from behind your desk. Print directly from your smartphone,
tablet or notebook and pick up the output at the Lanier MP C306 at your
convenience. You can also access information on the go and eliminate the
hassle of carrying or searching for hard copies. Simply access the documents
directly at the device via the embedded Document Server when you’re ready
to print or send them. Or, you can use a USB flash drive or SD card to carry the
information with you and plug it in to the MFP to print or share the documents.
Use less energy to save more
You work hard enough. You shouldn’t have to struggle to reduce energy
costs too. The Lanier MP C306 features a .64 W Sleep Mode to help
reduce energy consumption. Don’t worry about it compromising
productivity — the MFP can recover in only 10 seconds. With a low
cost-per-page and class-leading* Typical Electricity Consumption (TEC),
it supports your most aggressive sustainability goals. You can also
program the device to power off after business hours and conserve
energy. Concerned about noise when it’s in use? The MFP is designed
to operate at a reduced sound level, making it ideal for even the smallest
offices. Operating noise can be reduced even further by utilizing
Silent Mode so you don’t disrupt others in the office. Plus, the system
is ENERGY STAR certified and meets EPEAT Gold** criteria.
®
®
*From ENERGY STAR product list as of December 2, 2015.
**EPEAT rating is applicable only in the USA.
Get closer to simplifying your document tasks
2
1
3
4
5
5
You know better than anyone — a smaller office
doesn’t mean smaller workloads. Take advantage
of the compact Lanier MP C306 to meet your most
demanding everyday needs. Use it to copy, print,
scan and fax in small or mid-size workgroups while
minimizing energy consumption.
1
Smart Operation Panel: Navigate between jobs
easily via the 10.1" wide Super VGA Smart Operation
Panel, featuring USB/SD card slots and a customizable
home screen to link to commonly performed jobs.
2
Automatic Reversing Document Feeder (ARDF):
Handle one- and two-sided originals up to 8.5" x 14"
for copying, scanning and faxing efficiently from the
standard 50-Sheet ARDF.
3
Document Server: Keep information readily available
and maintain version control by storing up to 3,000
frequently used documents on the MFP’s hard drive.
4
User Authentication: Embedded software for
Near Field Communication (NFC) user authentication
comes standard on the Lanier MP C306. With
the optional NFC Card Reader, users can quickly
authenticate via NFC-enabled proximity cards.
By downloading the Smart Device Connector app, you can
connect to the Lanier MP C306 by simply touching your
smart device to the NFC tag (for Android devices) or scanning
the QR code (for iOS devices) on the Smart Operation Panel
and automatically connect to the MFP. From there users can
easily print, copy, scan or fax using preferences and contacts
preconfigured in their smartphones and tablets.
5
PB1080 Paper Feed Unit (Optional): Add up to
two 500-Sheet Paper Trays to increase paper
capacity to 1,350 sheets and complete more jobs
with fewer interruptions.
Mobile Printing and Scanning: Download the
Smart Device Print&Scan app to print to the
Lanier MP C306 directly from your personal mobile
device. You can even print data residing in the
Cloud and upload a scan from the Lanier MP C306
to Cloud storage.
BN1020 One-Bin Tray (Optional): Separate print
and copy or copy and fax output for faster, easier
document retrieval with a 100-Sheet One-Bin Tray.
Get in touch with faster, easier workflows
1
3
2
4
Use the 10.1" wide Super VGA Smart Operation Panel to perform everyday office tasks with speed and convenience,
using the same drag-and-drop, pinch-and-flick and swipe scrolling you’re familiar with on your personal mobile device.
1
2
3
4
Widgets: Add widgets to the home screen to
view the date and time, amount of toner, system
messages, incoming fax notification, environmental
and other settings, so you have the information you
need at a glance for faster, smarter decisions.
Quick Copy: Navigate through the copy process with
ease using flick-and-touch gestures. Simply choose
this feature from the screen and follow the intuitive
steps to print with the exact specifications you need.
Quick Fax: Search for fax recipients in moments
by flicking through your address book. You can
enter new fax contacts via a convenient soft keypad
on the screen. Preview the fax prior to transmission
for accuracy.
Do you prefer Lanier’s legacy user interface? Just
select it from the Smart Operation Panel and all the
familiar controls for copy, print, scan and fax will be
at your fingertips.
Icons and Folders: Create icons for one-touch workflows
for frequently used tasks. Then, organize them in
folders for fast, easy access when you need them.
Web Browser: Access websites directly from the
MFP with similar speed and functionality as you’d
expect from a personal mobile device. Convert a
web page into hard copy documents in seconds.
Wallpaper: Customize your wallpaper to fit your
preferences. Choose between pre-loaded options
or download your own image.
Quick Scan: Forward scanned documents via email
by selecting addresses directly from your address
book. You can even preview the document for
accuracy by scrolling in close when necessary.
Manage every task, every day
Handle all your information from a single device
Information is swirling around your workplace. You’re tasked with
figuring out what to do with it. Whatever you decide, you can use
the Lanier MP C306 to share it with key decision makers quickly and
conveniently. Print letter- and legal-size documents and view them
with coworkers exactly as intended. Make edits, scan it in full color
and distribute it across the hall or around the world in seconds. Fax
contracts to your clients. Copy your notes from an important meeting.
With the optional One-bin Tray, you can even separate output by job,
so you don’t have to sort through other prints and copies searching
for your document.
Use customization and automation to
work smarter
You have your own ideas about how to simplify your workday. Put
them into action with the Lanier MP C306. With the Smart Operation
Panel, you can customize workflows to minimize repetitive tasks
and unnecessary steps. Create easily identifiable icons for frequently
run jobs so you don’t have to play with settings every time. You can
organize the icons in intuitive folders on the Home Screen for your
convenience. Add widgets to see toner levels, energy use and more to
encourage more responsible printing. Incorporate apps and perform
specific tasks like ID card copy or scan-to-folder to save more time.
You can even set up selectable logins and billing codes for accounting
to classify and track user activity.
Choose who can access critical information
Your ideas set you apart. So why let just anybody have access to
them? With User Authentication, workers log in with a passcode at
the control panel or via smart identity card using the optional NFC
card reader. You can control each user’s access to specific functions
and help reduce costs. For example, you can prevent individuals from
using color printing if you know their jobs don’t require it. Or, you can
set print quotas to minimize unnecessary printing. With Locked Print,
users have to release jobs from the control panel, enhancing security
because documents aren’t left unattended in output trays.
Find more ways to collaborate with more people
Give your audience exactly what it’s looking for
Use the Lanier MP C306 when you don’t want your message to be
lost in the clutter. Create full-color professional documents on a wide
range of media types and sizes to differentiate your documents from
the others and meet your audience’s preferences. Take advantage of
the easy-to-use PCL, standard Adobe PostScript 3 and other print
streams to produce compelling color documents with 1200 x 1200 dpi
resolution job after job. And, with PDF Direct Print, you can help
relieve network congestion by printing PDFs without opening each
file in Adobe Acrobat
®
®
®
™
®
Choose a better way to manage workflows
When you’re sharing information, every detail is important. With
the Lanier MP C306, you can control print details easily so you can
deliver information quickly and accurately. Simplify any workflow
with the convenient icon-driven one-click, preset user interface
drivers. Looking for a print driver? Use the free Device Software
Manager utility on Lanier’s website to seamlessly download and install
the latest version to existing, and any new workstations you add to
the network. You can do it all yourself, without IT support or lengthy
installation times, and reduce the complexity of finding and installing
the proper print drivers.
Share digital messages instantly
Why keep great ideas to yourself? Just as important, why keep your
customers and colleagues waiting for them? Use the Lanier MP C306
to scan and send black-and-white or color images and documents in
PDF, TIFF, JPG or other formats instantly. Choose the most convenient
delivery method, whether it’s via Scan-to-File/Folder/URL/FTP/Email/
Media, and save paper while saving time. You can even send complex
graphics and large files without delay. The system minimizes file sizes
automatically to expedite delivery without compromising quality.
Don’t forget to check for accuracy before you send your files.
Preview thumbnails feature ensures you haven’t missed anything.
Lanier MP C306
S Y S T EM S P ECI F I C AT I O N S
General Specifications
Printer Specifications
Fax Specifications
ConfigurationDesktop
Scanning Element
One-dimensional solid scanning through
CCD
Printing Process
Dry electrostatic transfer system with dual component development; 4-drum method
System Memory
2 GB (RAM)
Output Speed (LT)
B&W and Full-Color – 31 ppm
First-Print Time (LT)
B&W – 6.8 seconds; Full-Color – 8.7 seconds
Recovery Time to
Less than 30 seconds – Quick Mode
Print Ready Mode
Less than 66 seconds – Normal Mode
(from Main Power Switch On)
Less than 10 seconds (from Sleep Mode)
Copy Resolution
600 x 600 dpi
Exposure Adjustment Manual and automatic
Multiple Copies
Up to 99
Document Feeder
Automatic Reversing Document Feeder
(Standard) (ARDF)
Original Capacity
50 sheets (ARDF)
Paper Sizes
Standard Tray: 5.5" x 8.5" to 8.5" x 11"
Optional Trays: 5.5" x 8.5" to 8.5" x 14"
Bypass Tray: 5.5" x 8.5" to 8.5" x 14"
Duplex Unit: 5.5" x 8.5" to 8.5" x 14"
Paper Weights
Standard Trays: 16 – 43 lb. Bond
(60 – 163 g/m )
Optional Trays: 16 – 43 lb. Bond
(60 – 163 g/m )
Bypass Tray: 16 – 58 lb. Bond
(60 – 220 g/m )
Duplex Unit: 16 – 43 lb. Bond
(60 – 163 g/m )
Exposure Glass
Up to 8.5" x 14"
Input Capacity
Standard: 250 sheets + 100-Sheet Bypass
Tray
Optional: 500 sheets x 1 or 2 Trays
Maximum: 1,350 sheets
Output Capacity
Standard: 100 sheets
Optional: 200 sheets (total) with
One Bin Tray
Paper Types
Plain, Recycled, Colored, Letterhead,
Preprinted, Bond, Card Stock, Special,
Coated, Waterproof, Back Copied,
Middle Thick, Thick, OHP (Transparency)*,
Envelopes*, Label Stock*
Auto DuplexStandard
Zoom
25% to 400% in 1% increments
Preset Reduction and 65%, 78%, 200%
Enlargement Ratios
Dimensions (WxDxH)
20.1" x 23.1" x 19.9" (510 mm x 588 mm x
505 mm) – includes ARDF and Operation
Panel
Weight
99.2 lbs./45 kg.
Power Requirements
120V, 60Hz, 15A
Power Consumption
Less than 1.3 KW (max.); .64 W (Sleep Mode)
TEC**
1.147 Kwh/week
Standard Features
Document Server, Java , Poster Copy,
ID Card Copy, Auto Tray Switch, Auto
Start, Auto Off Timer, Energy Saver
Timer, Color Balance Adjustment, Color
Balance Program, Auto Color Calibration,
Combine Copy, Electronic Sort, Photo
Mode, Series Copy, Job Programs, User
Codes (1,000), Simplified Display, Login/
Logout Button, Eco-friendly Indicator
CPU
RM7035C – 533MHz
Memory Capacity
2 GB
Hard Disk Drive
320 GB
Page Description
Standard: PCL5c/6, Genuine Adobe
LanguagesPostScript 3 , PDF Direct
Optional: XPS Direct Print, PictBridge
Maximum Print
1200 x 1200 dpi
Resolution
Standard Interfaces
Ethernet (10BASE-T/100BASE-TX/1000BASE-T), USB 2.0 (Type A and B), SD Slot
Optional Interfaces
Wireless LAN IEEE 802.11a/b/g/n and
IEEE 1284/ECP
Network Protocols
TCP/IP (IPv4, IPv6)
Network Operating
Windows Vista/7/8/8.1/Server 2003/
Systems Server 2003R2/Server 2008/Server
2008R2/Server 2012/Server 2012R2;
UNIX Filters for Sun Solaris 9/10; HP-UX
11.x/11iv2/11iv3; Red Hat Linux Enterprise
V4, V5, V6; SCO OpenServer 5.0.7/6.0;
IBM AIX Version 5L, 5.3, 6.1, 7.1;
SAP R/3, 3.x or later, mySAP, ERP2004
or later; Mac OSX 10.7 or later, Citrix
Presentation Server 4.5/XenApp 5.0, 6.0,
6.5; IBM iSeries AS/400
Utilities @Remote, SmartDeviceMonitor for Admin
and Client, Web SmartDeviceMonitor,
Web Image Monitor
Other Printer Features Media Direct Print (Print-from USB/SD),
Sample/Locked/Hold/Scheduled/Stored
Print, Banner Page Print, Poster Print,
Unauthorized Copy Control, User ID,
User Code, Classification Code, Layout
(N-up), Watermark, Collate, CLP
Simulation, Bonjour Support, PDF Direct
Print, Windows Active Directory Support,
DDNS Support, PCL Resident Font
Adoption, Universal Driver, WS Printer,
1200 dpi Support, XPS Support, Auto
Job Promotion, Mail-to-Print, PictBridge
Type
Circuit
Resolution
Modem Speed
Compression Method
Scan Speed
Transmission Speed
2
2
2
2
™
*Bypass Tray only.
**Typical Electricity Consumption by ENERGY STAR Program.
®
®
®
™
™
Memory
Memory Backup
Quick Dial
Group Dials
Standard Features
®
®
Scanner Specifications
Scanning Speed
32 ipm @ 200 dpi Full-Color and B&W
Simplex
Scanning Resolution
100 to 600 dpi
Scan Area
Main: 8.5" (216 mm)
Sub: 14.0" (356 mm)
Compression Method B&W: TIFF (MH, MR, MMR, JBIG2), Grayscale
Full-Color: JPEG
Scan Mode
B&W: Text, Text/Line Art, Text/Photo,
Photo, Grayscale
Full-Color: Text/Photo, Glossy Photo,
Standard Auto Color Select
Standard Interfaces
Ethernet 10BASE-T/100BASE-TX/1000BASE-T,
USB Type A and SD Card
Optional Interfaces
Wireless LAN (IEEE 802.11a/b/g/n),
IEEE 1284/ECP
File Formats
Single/Multi Page TIFF, Single/Multi Page
PDF, Single/Multi Page High Compression
PDF, Single/Multi Page PDF/A and Single
Page JPEG
Scan Modes Supported Scan-to-Email (POP, SMTP, TCP/IP);
Scan-to-Folder (SMB/FTP); Network TWAIN
Scanning; Scan-to-Media (USB/SD)
Standard Features
WS-Scanner, Scan to Email/SMB/ FTP/URL,
Scanned File Naming, Scan File Type
Selection, LDAP Support, Preview Before
Transmission, PDF Encryption, Drop
Out Color Send, TWAIN Scan, Universal
Send, PDF/Digitally Signed PDF/PDF/A,
Distributed Scan Management
www.lanier.com
Ricoh Americas Corporation, 70 Valley Stream Parkway, Malvern, PA 19355, 1-855-5-LANIER
Lanier™ and the Lanier logo are trademarks of Ricoh Americas Corporation. Ricoh and the Ricoh Logo are registered trademarks of Ricoh Company Ltd. All other trademarks are the property
of their respective owners. © 2015 Ricoh Americas Corporation. All rights reserved. Lanier products and services are offered by Ricoh Americas Corporation and its affiliates. The content of this
document, and the appearance, features and specifications of Lanier products and services are subject to change from time to time without notice. Products are shown with optional features.
While care has been taken to ensure the accuracy of this information, Ricoh makes no representation or warranties about the accuracy, completeness or adequacy of the information contained
herein, and shall not be liable for any errors or omissions in these materials. Actual results will vary depending upon use of the products and services, and the conditions and factors affecting
performance. The only warranties for Lanier products and services are as set forth in the express warranty statements accompanying them.
®
L3597-1
ITU-T CCITT G3
PSTN, PBX
200 x 100 dpi, 200 x 200 dpi
33.6K – 2,400 bps with Auto Fallback
MH, MR, MMR, JBIG
2.4 seconds
Approx. 2 seconds/page (200 x 100 dpi,
JBIG)
4 MB (approx. 320 pages)
1 hour
2,000 numbers
100 groups (max. 500 numbers per group)
Detection of Misplaced Documents, Double
Check Destination Address, Direct SMTP,
Serial Broadcasting, Fax Forward to Email/
Folder, Internet Fax (T.37), IP Fax (T.38), LAN
Fax, Remote Fax (optional), Paperless Fax,
LDAP Support, Universal Send
Hardware Options
Paper Feed Unit PB1080
Paper Size
Paper Weight
Paper Capacity
Dimension (WxDxH)
Weight
5.5" x 8.5" SEF, 8.5" x 14" SEF
16 – 43 lb. Bond (60 – 163 g/m )
500 sheets x 1 or 2 trays
19.6" x 21.7" x 5.9"
(498 mm x 552 mm x 150 mm)
23 lbs./10.4 kg.
1 Bin Tray BN1020
Paper Size
Paper Weight
Paper Capacity
5.5" x 8.5" SEF to 8.5" x 14" SEF
16 – 43 lb. Bond (60 – 163 g/m )
200 sheets (total output with standard tray)
2
2
Additional Options
Counter Interface Unit M12, Low Cabinet, Medium Cabinet, High
Cabinet, Camera Direct Print Card Type M13, Fax Connection Unit
Type M13, XPS Direct Print Option Type 13, IEEE 1284 Interface
Board Type A, IEEE 802.11 a/b/g/n Interface Unit Type M2, USB
Device Server Option Type M12, Copy Data Security Unit Type G,
DataOverwriteSecurity Unit Type I, File Format Converter Type E,
Unicode Font Package for SAP 1 License, NFC Card Reader Type M13,
OCR Unit Type M13, Embedded HotSpot Type S, External USB Keyboard
Security
Network User Authentication, IP Address Filtering, HDD Data
Overwrite, HDD Encryption, Copy Guard Security, Secure Print,
Encrypted Secure Print, Encrypted PDF Mode, Digitally Signed PDF,
IP Sec, SSL/TLS, SNMPv3, SMTP over SSL, Security for IEEE 802.11i/w,
IPv6, Transport Layer Security
Specifications are subject to change without notice. Some features
may require additional options.
For maximum performance and yield, we recommend using genuine
Lanier parts and supplies.
Leica CM1520
Technical Data Sheet
2
Type
CM1520
CM1520
CM1520
CM1520
CM1520
Test symbol
-
c_CSA_us
-
-
-
Nominal voltage
100 VAC ±10 %
120-127 VAC
±10 %
230 VAC ±10 %
220-230 VAC
±10 %
240 VAC ±10 %
Nominal frequency
50/60 Hz
60 Hz
60 Hz
50 Hz
50 Hz
Power input
1440 VA
1440 VA
1440 VA
1440 VA
1440 VA
Max. start‑up current
for 5 s
45 A eff.
45 A eff.
45 A eff.
45 A eff.
45 A eff.
Protective class
I
I
I
I
I
2
2
2
2
2
Overvoltage inst. category
II
II
II
II
II
Heat emmision (max.)
1600 J/s
1600 J/s
1600 J/s
1600 J/s
1600 J/s
Operating temperature
range (ambient temperature)
18-35 °C
18-35 °C
18-35 °C
18-35 °C
18-35 °C
Pollution degree
1
1
according to IEC-1010, UL 3101
All specifications related to temperature of the cooling unit are valid only for an ambient temperature of 22 °C and a
relative humidity of no more than 60 %!
Refrigeration system
(50/60 Hz)
Cryochamber
Temperature range
0 °C to -30 °C (+ 3 K/- 3 K)
Cooling time down to -30 °C
max. 6 hrs., at 22 °C ambient
temperature
Defrost
Automatic hot gas defrost
1 automatic defrost cycle/24 hours, time-controlled
(duration 12 min.)
Refrigeration capacity 2
690 W
Electric coarse feed
slow 600 μm/s
rapid 900 μm/s
Safety factor
3
Refrigerant
300g ±5g refrigerant R 404A
Compressor oil
0,6 l EMKARATE RL-22S, ICI
Quick­‑freeze shelf
Maximum cooling
- 35 °C (+ 3 K/- 5 K)
Number of freezing stations
10
Defrost
Manual hot gas defrost, timecontrolled (duration 12 min.)
2
according to CECOMAF Liquid temperature 45 °C, evaporation temperature -25 °C
3
Microtome
Cryocabinet
Type
Rotary microtome
Dimensions
Section thickness selection
2 - 60 μm
Width (w/o handwheel)
600 mm
Total specimen feed
25 mm
Width (with handwheel)
730 mm
Vertical stroke
59 mm
Depth
730 mm
Maximum specimen size
55 x 55 mm or
50 x 80 mm
Hight
1140 mm
Specimen orientation
8° (x-, y-, z-Achse)
Weight (incl. microtome,
without specimen cooling)
approx. 135 kg
Electric coarse feed
slow 600 μm/s
rapid 900 μm/s
Lamp
Storage conditions
50 Hz version
Osram Dulux S 11 W/21
Temperature
Color: LUMILUX light white
5 - 50 °C
60 Hz version
Osram Dulux S 13 W/21
Humidity
Color: LUMILUX light white
< 80 %,
non-condensing
Transport temperature
All CM1520 instrument variants need the following secondary fuses
F1
T0.25A
L250V
Type FST 6.3x32
Firma SCHURTER
F2
T1.6A
L250V
Type FST 6.3x32
Firma SCHURTER
F3
T1.0A
L250V
Type FST 6.3x32
Firma SCHURTER
F4
T6.25A
L250V
Type FST 6.3x32
Firma SCHURTER
95.11540 Rev C · 10/2012
Copyright © by Leica Biosystems Nussloch GmbH ·Subject to modifications·
LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.
-40 °C to +55 °C
EQUIPMENT SPECIFICATIONS & DETAILS
Linistain
Automatic Slide Stainer
The Linistain should be stationed on a flat level surface
Electrical Specifications
Volts: 115
Amps: 1.3
within 8 feet of a water supply and drain or sink, and
within 6 feet of a receptacle. The supply and drain ports
are located at the rear and on the left as you face the in-
Watts/Hr (max.): 144
strument. The accessory stands substantially improve the
BTUs/Hr (max): 490
instrument drainage. A dedicated water shut-off is rec-
Dimensions & Weight
Overall Dim: 7.48”H x 25.2”W x 6.26”D
Weight: 16 lbs.
*Height of Stainer without stands and with lid closed.
ommended for the water supply leading to the stainer.
Standard Plumbing Accessories Included
Supply: 3/8” ID x 5/8” OD x 8’ long supply hose to
connect to existing 3/8” hose barb fitting
Space Requirements
Drain: 1/2” ID x 3/4” OD x 8’ long drain hose to
connect to existing 1/2” hose barb fitting
or 1/2” Sink Tailpiece Branch
Clamps: 4 hose clamps
Minimum: 13”H x 27”W x 8”D
Recommended: 15”H x 30”W x 8”D
*Height of Stainer without stands and with lid closed.
Optional Stand & Plumbing Kit:
1. 1 Pair of stainless steel stands that raise
the stainer 2”
2. Supply fitting assembly including 3/8” compression
tee, shut off valve and 3/8” barb fitting.
(Connects in-line with cold water sink supply.)
Special Notes:
Drain hose supplied will connect to 1/2” Sink Tailpiece
Branch or standard 1/2” dishwasher drain.
32 Commerce Street | Springfield, NJ 07081
www.avantik-us.com
888.392.8411
Next
M 9 & M 1 1 U LT R A C L AV E
®
Next
Back
RELIABLE
The Midmark M9 and M11 UltraClave® Automatic
Sterilizers - make sterilization reliable and efficient.
Today, more than ever, you need reliable and easy to use
products from a trusted partner who understands your
sterilization needs. The Midmark M9 and M11 UltraClave®
Automatic Sterilizers are specifically designed and
engineered to meet those needs. The intuitive display and
simple prompts help you easily select the cycle you need
whether it is for unwrapped items, pouches, packs or
handpieces. Once the sterilization process is complete, the
door conveniently opens automatically and quietly to
dissipate the steam and provide fast and efficient drying of
your instruments.
Create peace of mind by making the dental market’s leading
sterilizers...the Midmark M9 and M11 UltraClave®...your
preferred office choice.
Pouch Rack
M9 - 1 pouch rack
M11 - 2 pouch racks
Vertical Cassette Rack
(M11 only)
Holds four 8" x 11" and four
3" x 8" cassettes.
Horizontal Cassette Rack
(M11 only)
Holds four 8" x 11" and four
3" x 8" cassettes.
Back
Next
Symbol
Pre-programmed
Cycle
Sterilization
Temperature
Unwrapped
132˚ C 132˚ C
270˚ F 270˚ F
Pouches
Packs
M9
Handpieces
(Unwrapped & Pouches)
M11
Hot Cycle Time
(Fill, Heat-up & Vent)
M9
M11
Sterilization
Time
Dry Time
M11
11 min. 15 min.
3 min.
3 min.
30 min. 30 min.
14 min. 18 min.
44 min. 48 min.
132˚ C 132˚ C
270˚ F 270˚ F
12 min. 17 min.
5 min.
5 min.
30 min. 30 min.
17 min. 22 min.
47 min. 52 min.
121˚ C 121˚ C
250˚ F 250˚ F
10 min. 14 min.
30 min. 30 min.
30 min. 30 min.
40 min. 44 min.
70 min. 74 min.
132˚ C 132˚ C
270˚ F 270˚ F
11 min. 16 min.
30 min. 30 min.
17 min. 22 min.
47 min. 52 min.
6 min.
NOTE: Cycle times are approximate and may vary depending on instrument loads.
Preset drying is 30 minutes but can be programmed from 0 to 60 minutes.
M11
M9
M11
Total Hot Cycle
Time w/dry
M9
6 min.
M9
Total Hot Cycle
Time w/o dry
M9
M11
Back
Next
W H AT D O YO U WA N T I N A S T E R I L I Z E R ?
n
Fast and easy use for efficient instrument processing
n
Reliability and effectiveness for infection control assurance
n
Patented automatic opening door for efficient instrument drying
n
Maximum space utilization and a complimentary design
for your sterilization area
Our full line of sterilizers address all of your important critical
sterilization needs. In fact, we’re sure you’ll find a Midmark
sterilizer that’s just right for your practice.
Back
Next
Pulse-air Removal Technology
Safety Features
The Steam-Flush Pressure-Pulse Air Removal System is so
If the door is not closed completely or the reservoir water level
efficient that it can pass the air removal tests required on more
is low, the LCD display will provide the appropriate message.
complex vacuum steam sterilizer systems, ensuring good steam
In either case, sterilization will not continue until you’ve
penetration for those challenging loads. Plus, less complexity
attended to the unit.
means better reliability and a cost effective solution for your
sterilization needs.
Ease of Draining & Filling
For ease of draining and filling, both the M9 and M11’s
Convenience at a Glance
reservoir fill port and drain tube are in the front of the unit,
The LCD display indicates cycle selected, cycle temperature and
exposure time. When the cycle enters sterilization mode, the
temperature, pressure and the remaining cycle time is displayed.
not on top or in back.
Optional Printer Accessory
Remaining cycle time is also displayed in the dry mode.
The M9 and M11 printer accessory provides a permanent
Note: Temperature & pressure are not displayed during dry mode.
record of cycle times, temperatures and pressures during
a cycle.
No More Wet Instruments
Once sterilization is complete, the door opens automatically and
quietly to dissipate steam and dry your instruments. You’ll have
dry, sterile instruments every time.
Self Program Controls
Programmable controls allow
for creation of different cycle
parameters. Programmable
buttons allow you to change
the following: Exposure Time
(3 to 90 minutes), Temperature
(230 to 275º F), Dry Time (0
to 60 minutes) and Vent (slow
or fast). The #1 and #2 buttons
allow you to store the change
if desired.
Pre-Programed Controls
Four pre-programmed
sterilization cycle controls:
Unwrapped (132º C or 270º F
for 3 minutes), Pouches (132º
C or 270º F for 5 minutes),
Packs (121º C or 250º F for
30 minutes), Handpieces
(unwrapped and pouched)
(132º C or 270º F for
6 minutes).
LCD Display
Indicates cycle selected,
temperature and exposure
time. During the cycle,
the display shows messages
describing status of cycle.
When the cycle enters
sterilization mode, remaining
time is displayed as well as
temperature and pressure.
Cycle Start Button
Initiates selected cycle
Manual Stop Button
Terminates selected cycle
or function
Back
Specifications
M9
M11
Overall length w/plug:
20.38" (51.8 cm)
23.8" (60.5 cm)
Overall width:
15.3" (38.9 cm)
17.8" (45.2 cm)
Overall height w/printer:
15.8" (40.1 cm)
17.8" (45.2 cm)
Minimum Countertop area:
15.3" x 17.88" (38.9 cm x 45.4 cm)
17.8" x 21.0" (45.2 x 53.3 cm)
Chamber:
9" diameter (22.9 cm), 15" depth (38.1 cm)
3.5 gal. usable volume (13.4 liters)
11" diameter (28 cm), 18" depth (45.7 cm)
6.5 gal. usable volume (24.6 liters)
Trays:
Two large – 7.3" W x 12" L x 0.8" D
(18.6 cm x 30.5 cm x 2.2 cm)
Two large – 9" W x 15" L x 1.1" D
(22.9 cm x 38 cm x 2.9 cm)
Two small – 5.6" W x 12" L x 0.8" D
(14.3 cm x 30.5 cm x 2.2 cm)
Two small – 6.6" W x 15" L x 1.1" D
(16.8 cm x 38 cm x 2.9 cm)
Unit weight:
73 lbs. (33.1 kg)
99 lbs. (44.9 kg)
Shipping weight:
81 lbs. (36.7 kg)
131 lbs. (59.4 kg)
Water reservoir capacity:
1.1 gal. (4.1 liters)
1.4 gal. (5.3 liters)
Electrical requirements:
115 VAC, 50/60 Hz, 15 amps single phase
115 VAC, 50/60 Hz, 15 amps single phase
115 VAC has 1425 watt tubular immersion heater
115 VAC has 1425 watt tubular immersion heater
230 VAC, 50/60 Hz, 10 amps single phase
230 VAC, 50/60 Hz, 10 amps single phase
230 VAC has 1500 watt tubular immersion heater
230 VAC has 1500 watt tubular immersion heater
UL61010A-1, UL61010A-2-041
UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041 96
CAN/CSA C22.2 No. 1010.2-041-96
Meets the requirements of ASME Boiler and
Pressure Vessel Code
Meets the requirements of ASME Boiler and
Pressure Vessel Code
Canadian registration number available
Canadian registration number available
A separate (dedicated) circuit is recommended
for this sterilizer
A separate (dedicated) circuit is recommended
for this sterilizer
9A259001 – Impact Dot Matrix Printer
9A259001 – Impact Dot Matrix Printer
9A224001 – Sterilizer Deep Tray
9A225001 – Sterilizer Deep Tray
9A226001 – Sterilizer Pouch Rack
9A226001 – Sterilizer Pouch Rack
9A307001 – Cool Hand Tool
(Tray & Cassette Removal Tool)
9A307001 – Cool Hand Tool (Tray & Cassette Removal Tool)
Optional accessories:
9A260001 – External Condensing Tank
9A260001 – External Condensing Tank
9A215001 – Horizontal Cassette Rack
9A215002 – Vertical Cassette Rack
9A306001 – Orthodontic Cassette Rack
Installation
Use on laminate, stainless steel or stone surface. Allow 2.0"
(5.08 cm) on sides and rear and 5" (12.7 cm) above to allow
space to fill reservoir and change the printer paper roll.
Installation
Use on laminate, stainless steel or stone surface. Allow 2.0"
(5.08 cm) on sides and rear and 5" (12.7 cm) above to allow
space to fill reservoir and change the printer paper roll.
NEW
M3 UltraFast® Automatic Sterilizer
M11D and M9D AutoClave® Sterilizers
The Midmark M3 UltraFast® Automatic
Sterilizer allows you to rapidly process
your instruments. The M3 provides
reliable, fast sterilization and quickly
dries your instruments.
The Midmark M9D and M11D AutoClave® Automatic Sterilizers offer easy,
effective sterilization, but without the convenience of a door that opens
automatically. One button starts the cycle...but at the end of the automatic
sterilization process, you need to manually open the door within 30 minutes
of completion to activate the dry cycle. This extra step is the only physical
difference between the M9D and M11D and their automatic counterparts.
Midmark is an ISO 13485 and ISO 9001 Certified Company.
For more information or a demonstration, contact your Midmark
dealer or call: 1-800-MIDMARK Fax: 1-877-725-6495
Outside the U.S.A. call: 1-937-526-3662 Fax: 1-937-526-8214
or visit our website at midmark.com
© 2007 Midmark Corporation
60 Vista Drive P.O. Box 286 Versailles, Ohio 45380-0286
Products subject to improvement changes without notice
Litho in U.S.A. 007-0640-00 Rev. C1 (9/09)
255
Lighting
S
P
E
C
I
F
I
C
A T I
O
N
S
Ritter 255 Procedure
Light Specifications
The following systems are recommended based on the following ceiling
heights (measured from the bottom of the ceiling surface to the floor):
Illumination at 39" (1 m)
Less than 8' (2.4 m)
Mobile Light
Focal length: 7,500 fc (80,700 lux)
8' (2.4 m) to 9' (2.7 m)
8' (2.4 m) Single or Dual Light
Pattern diameter: 7.5" (19 cm)
9' (2.7 m) to 10' (3 m)
9' (2.7 m) Single or Dual Light
Depth of field: 29.8" (75.8 cm)
Greater than 10' (3 m)
8' (2.4 m) Single or Dual Light with 10'
ceiling mount adapter kit(s) or Mobile light
Color temperature: 4,400 K
Diameter of lighthead: 20" (50.8 cm)
LED Light Module: 16 LEDs arranged in
a 4x4 array, 32 Watt rating.
Wall Mount
63.5"
99"
Electrical
115 VAC, 50/60 Hz, 0.7 amps
230 VAC, 50/60 Hz, 0.5 amps
Classified by TUV with respect to electric
shock, fire, mechanical and luminaires for
diagnosis hazards only in accordance with
IEC/ES 60601-1, CAN/CSA C22.2 606011, 60601-1-2, 60601-2-41, CE Medical
Device Directive 93/42/EEC Annex VII
Class 1, and RoHS European Directive
2011/65/EU
31"
Models
255-001 Single mount, 8' (2.4 m) ceiling
255-002 Single mount, 9' (2.7 m) ceiling
255-003 Dual mount, 8' (2.4 m) ceiling
255-004 Dual mount, 9' (2.7 m) ceiling
255-005 Mobile Procedure Light
44"
Ceiling Mount
255-006 Wall Mount
255-007 Mobile Procedure Light w/o cord
46.3"
13.6"
22.3"
Mobile
25.3"
47"
Max. 88"
Min. 52"
28"
Authorized CE Representative
Countries in the EEC should
direct all questions, incidents,
and complaints to Midmark’s
Authorized CE representative
listed below:
Midmark EMEA Ltd
Beech House, First Floor
East Wing, Ancells Business Park
Fleet, Hampshire,
GU51 2UN, UK
Call: + 44 (0) 1252 360 940
Fax: + 44 (0) 1252 360 941
Midmark is an ISO 13485 and
ISO 9001 Certified Company.
For more information
or a demonstration, contact
your Midmark dealer or Midmark
Corporation, Versailles, Ohio.
Call: 1-800-MIDMARK
Fax: 1-800-365-8631
midmark.com
© Midmark Corporation 2014
Manufactured by Midmark Corporation
Products subject to improvement changes without notice.
Litho in U.S.A. 007-1070-00 Rev. B1 (11/15)
LED Procedure Light
255 Lighting
Seeing is believing
We’ve also designed the 255 light with a
large reflector, including 1,040 reflecting
facets, which provide an even distribution
of light and reduction of shadows for
uninterrupted illumination.
Affordable, improved performance procedure lighting
Whether you practice in an office environment or specialized
procedure area, your work requires superior, white, shadowfree illumination that is safe and cool to the touch. The Ritter
255 LED Procedure Light by Midmark is designed to deliver
both quality and affordability with features that can help you
provide the best care to your patients.
High-quality procedure lighting
Integrated controls on both sides of the light head provide
convenient access to make lighting adjustments. You can turn
the light on and off and adjust the light brightness from the
control touchpad. The sleek contours and sealed light head
were designed to make cleaning and care easier. And the
handle can be removed for steam sterilization.
Features designed to make your life easier
The Ritter 255 LED Procedure Light is counterbalanced,
designed to help you achieve precise positioning using less
force – all without drifting or needing frequent adjustments
like spring-based systems. And the yoke design is intended to
further simplify positioning with its smooth range of motion.
Ritter 255 Single
Procedure Light
Superior lighting by design
$2,000
$1,000
•
LED Light
•
Halogen Light
40
,0
00
35
,0
00
30
,0
00
0
25
,0
00
$0
20
,0
00
Ritter 255 Wall Mount
Procedure Light
$3,000
15
,0
00
Ritter 255 Combination
Procedure Light
$4,000
10
,0
00
Ritter 255 Mobile
Procedure Light
• 7,500 footcandles, significantly more light intensity of
similar products
• An exceptional color rendering index of greater than 95
• And a color temperature of 4,400 K
$5,000
5,
00
0
The Ritter 255 LED Procedure Light is designed to
deliver superior illumination. The combination of the
optics enhances one's ability to see color variations in
tissue and is intended to aid you in a more accurate
diagnosis and treatment. Features include:
The LED difference
Lifetime Operating Cost (Including Bulb Replacement Cost)
255
Lighting
S
P
E
C
I
F
I
C
A T I
O
N
S
Ritter 255 Procedure
Light Specifications
The following systems are recommended based on the following ceiling
heights (measured from the bottom of the ceiling surface to the floor):
Illumination at 39" (1 m)
Less than 8' (2.4 m)
Mobile Light
Focal length: 7,500 fc (80,700 lux)
8' (2.4 m) to 9' (2.7 m)
8' (2.4 m) Single or Dual Light
Pattern diameter: 7.5" (19 cm)
9' (2.7 m) to 10' (3 m)
9' (2.7 m) Single or Dual Light
Depth of field: 29.8" (75.8 cm)
Greater than 10' (3 m)
8' (2.4 m) Single or Dual Light with 10'
ceiling mount adapter kit(s) or Mobile light
Color temperature: 4,400 K
Diameter of lighthead: 20" (50.8 cm)
LED Light Module: 16 LEDs arranged in
a 4x4 array, 32 Watt rating.
Wall Mount
63.5"
99"
Electrical
115 VAC, 50/60 Hz, 0.7 amps
230 VAC, 50/60 Hz, 0.5 amps
Classified by TUV with respect to electric
shock, fire, mechanical and luminaires for
diagnosis hazards only in accordance with
IEC/ES 60601-1, CAN/CSA C22.2 606011, 60601-1-2, 60601-2-41, CE Medical
Device Directive 93/42/EEC Annex VII
Class 1, and RoHS European Directive
2011/65/EU
31"
Models
255-001 Single mount, 8' (2.4 m) ceiling
255-002 Single mount, 9' (2.7 m) ceiling
255-003 Dual mount, 8' (2.4 m) ceiling
255-004 Dual mount, 9' (2.7 m) ceiling
255-005 Mobile Procedure Light
44"
Ceiling Mount
255-006 Wall Mount
255-007 Mobile Procedure Light w/o cord
46.3"
13.6"
22.3"
Mobile
25.3"
47"
Max. 88"
Min. 52"
28"
Authorized CE Representative
Countries in the EEC should
direct all questions, incidents,
and complaints to Midmark’s
Authorized CE representative
listed below:
Midmark EMEA Ltd
Beech House, First Floor
East Wing, Ancells Business Park
Fleet, Hampshire,
GU51 2UN, UK
Call: + 44 (0) 1252 360 940
Fax: + 44 (0) 1252 360 941
Midmark is an ISO 13485 and
ISO 9001 Certified Company.
For more information
or a demonstration, contact
your Midmark dealer or Midmark
Corporation, Versailles, Ohio.
Call: 1-800-MIDMARK
Fax: 1-800-365-8631
midmark.com
© Midmark Corporation 2014
Manufactured by Midmark Corporation
Products subject to improvement changes without notice.
Litho in U.S.A. 007-1070-00 Rev. B1 (11/15)
LED Procedure Light
Dayton® Premium Stainless Steel Single
Bowl Top Mount Sink
Model(s) DPC1252210
SPECIFICATIONS
PRODUCT SPECIFICATIONS
Dayton® Premium Stainless Steel Single Bowl Top Mount Sink.
Overall dimensions are 25" x 22" x 10-1/4". Sink is manufactured
from 20 gauge 304 Stainless Steel with a Premium Highlighted Satin
finish, Center drain placement and Full spray sides and bottom.
Installation Type:
Material:
Finish:
Gauge:
Sound Deadening:
Number of Bowls:
Sink Dimensions:
Bowl 1 Dimensions:
Drain Size:
Drain Location:
Minimum Cabinet Size:
Mounting Hardware:
Top Mount
304 Stainless Steel
Premium Highlighted Satin
20
Full spray sides and bottom
1
25" x 22" x 10-1/4"
21" x 15-3/4" x 10"
3-1/2" (89mm)
Center
30"
Part # 64090012 included for
countertops up to 3/4" (19mm) thick
Cutout Template #:
1000001188
Template is available for download at elkay.com
Cutout Dimensions for Top Mount Installation:
24-3/8" x 21-3/8" (619mm x 543mm) with 1-1/2" (38mm) corner
radius
AMERICAN PRIDE. A LIFETIME TRADITION.
Like your family, the Elkay family has values and traditions that
endure. For almost a century, Elkay has been a family-owned and
operated company, providing thousands of jobs that support our
families and communities.
Sinks are listed by IAPMO® as meeting the applicable
requirements of the Uniform Plumbing Code®, International
Plumbing Code®, and National Plumbing Code of Canada.
Product Compliance:
BUY AMERICAN ACT
ASME A112.19.3/CSA B45.4
Clean and Care Manual (PDF)
Installation Instructions (PDF)
Limited Lifetime Warranty (PDF)
Hole Drilling Configurations:
Installation Profile:
PART:________________________________QTY: _____________
PROJECT:______________________________________________
CONTACT:______________________________________________
DATE:__________________________________________________
NOTES:_________________________________________________
APPROVAL:_____________________________________________
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com
for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Elkay REV 11092015
elkay.com/dpc1252210
2222 Camden Court
Oak Brook, IL 60523
© 2015
DPC1252210_spec.pdf
SPECIFICATIONS
Dayton® Premium Stainless Steel Single
Bowl Top Mount Sink
Model(s) DPC1252210
OPTIONAL ACCESSORIES
Bottom Grid:
Cutting Board:
Drain:
Hardware:
Rinsing Basket:
Sinkmate:
GBG2115SS, LKWBG2115SS
CB1516
D1125
LK364, LK463
LKWRB2115SS, LKWERBSS
LKSM17, LKSMHOOK,
LKSMSPONGE, LKSMHSL
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com
for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Elkay REV 11092015
elkay.com/dpc1252210
2222 Camden Court
Oak Brook, IL 60523
© 2015
DPC1252210_spec.pdf
Specs for Exam/Proc. Rm. Faucets & Sinks
Specs for Paper Towel Dispenser
Specs for Soap Dispenser and Anti-bac
Specs for Sharps Disposal
Specs for Glove Box Holder
Quarry Selection—Grand Rapids, Michigan
Reception Desk
Waiting Room
Quarry Selection—Grand Rapids, Michigan
Main Clinic Entrance
Physician Lounge
Quarry Selection—Grand Rapids, Michigan
Procedure Room
Exam Room
Quarry Collection
Waiting Room
Paint Swatches: (A combination of these will be used for accents and main color)




Sherwin Williams SW7013 Ivory Lace
Sherwin Williams SW7506 Loggia
Sherwin Williams SW7508 Tavern Taupe
Sherwin Williams SW7033 Brainstorm Bronze (Trim)
Fabrics: (All three fabrics will be used)



Maharam Twice Quarry
Maharam Lariat Taupe
Maharam Lariat Oyster
Cabinets:



Base: Wilsonart 7942-07 Cocobala
Counter: Pionite AT251 Suede Beige Crepe
Formica Metal Reveal - 2022
Flooring:

Carpet: J + J Invisions Mineral Modular 7027 Olivine 1793 (JJPFD03)
Base Board:

Johnsonite 29-Moon Rock
Exam/Procedure Rooms
Paint Swatches:


Sherwin Williams SW7506 Loggia
Sherwin Williams SW7508 Tavern Taupe
Fabrics:



Waiting Chair: Black
Privacy Curtain: InPro Maharam Inrement 511443 002 Assist
Exam Table: Black
Cabinet:


Base: Wilsonart 7942-07 Cocobala
Counter: Pionite AT251 Suede Beige Crepe
Flooring:

Vinyl: Gerflor Walnut Brown 1314
Base Board:

Johnsonite 29-Moon Rock
Bathrooms
Flooring:

Tile: Florim USA Ethos Beige
Paint Swatches:

Main: Sherwin Williams SW7506 Loggia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising