761SM-12
DSL
761SM-12
Surface Mount Wall
Jack with xDSL Filter
Certified by IOL for VDSL2/
ASDL2+, IPTV Deployment
Meets IPTV Ring Trip Saturation
Current Requirements for VDSL2
and ADSL2+ Systems Delivering
IPTV Signals
Tii Auto-Jack™ Exceeds Telcordia
Severe Lightning Surge
Requirements
Surface Mount Design
Wall Phone Mounting Hardware
Included
761SM-12
The 761SM-12 Wall Mount DSL Filter splits the combined voice and data signals carried
on telephone lines providing separate outputs for both phone and data services. The
761SM-12 utilizes Tii’s proprietary gel filled IDC rockers for wire terninations. The IDC
rockers are color coded for tip and ring wire orientations. Termination of wires is easy as
the wires do not need stripping. All one needs is to lift the rocker, straighten ends of the
wire, insert and pull the rockers in fully down posistion.
KEY PRODUCT BENEFITS
XX The 761SM-12 unique design provides customer bridging and DSL POTS splitting in
XX
XX
XX
XX
XX
one module.
The Tii filter design makes it possible to use a single phone line to provide triple play
services including VDSL2/ADSL2+ and IPTV.
Tii Auto-Jack provides conveniently located customer demarcation point test port.
Surface mount design can mount onto a wall or over a single-gang box.
Tool-less IDC rocker for telephone wire connections on the back side of jack plate.
IDC rockers are gel-filled for long term reliable connections.
INDUSTRY STANDARDS
141 Rodeo Drive
Edgewood, NY 11717
T. 631. 789.5000
Toll Free 888.844.4720
F. 631. 789.5063
sales@tiinetworktechnologies.com
www.tiinetworktechnologies.com
XX ANSI T1.424 Compliant to full VDSL2 30MHz bandwidth.
XX Listed to UL 1863.
XX Meets Telcordia TR-127 for ring trip saturation.
761SM-12
1.04
3.47
4.81
S P E C I F I C AT I O N S
Electrical (Complies with ANSI T1.424 Issue 2 Annex E)
DC Loop Current
0 to 100 mA
DC Loop Voltage (tip-to-ring)
0 to -60Vdc
Ringing Signals
103 Vrms superimposed on the DC Loop Voltage;
20 - 30 Hz
DC Resistance
< 20 ohms, POTS tip-to-ring with Line port (U-R) shorted
Insertion Loss (Short & Long Loop)
≤ 0.5 dB
Tip-to-Ring Capacitance, POTS port
20 ≤ C ≤ 100 nF; 20 - 30 Hz
Input Impedance (Measured Level)
≤ 0.25 Db; 30 kHz - 30 MHz, ZTr = 600
Attenuation Distortion (Voice Band), increase relative to Insertion Loss at 1004 Hz
+0.7 to -0.5dB; 200 - 3.4 kHz, short loop, ZTc = 900, ZTr = 600
+0.7 to -0.5dB; 3.4 - 4.0 kHz, short loop, ZTc = 900, ZTr = 600
+0.4 to -0.5dB; 200 - 3.4 kHz, long loop, ZTc = 900, ZTr = 600
+0.5 to -0.5dB; 3.4 - 4.0 kHz, long loop, ZTc = 900, ZTr = 600
Delay Distortion (Voice Band)
< 25μs
Return Loss (Voice Band) (Short & Long Loop)
> 7 dB
Longitudinal Balance, Two Port Technique, DSL to Line Port
> 60 dB; 30 - 1100 kHz
(U - R) and Line Port (U - R) to POTS
> 55 dB; 1100 kHz - 30 MHz
Capacitance to Ground, POTS Port
≤ 1.0 nf; 20 - 30 Hz
DSL Band Attenuation
> 65 dB; 30 kHz - 30 MHz
DC Current Influence (Ring Trip)
< 2% up to 300 mA
Inter-modulation Distortion (MTPR)
30 kHz - 30 MHz
Environmental
Lightning Surge
GR-1089 CORE Level 1 and Level 2 Surge
Power Cross
GR-1089 CORE First and Second Level AC Power Fault Immunity
Operating Temperature
-40 to +65˚C (-40 to 149˚F)
Relative Humidity
0 to 95%, non-condensing
UL Listed 1863
As a communication circuit accessory
ORDERING
I N F O R M AT I O N
Model No.
Description
761SM-12
Surface Mount xDSL Filter
6/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising