CPGS-9120-C - Anewtech Systems

CPGS-9120-C - Anewtech Systems
Designed for Rugged Excellence
3U CompactPCI EN50155 12-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) in
CompactPCI socket, and 4x10/100/1000Base-T(X) in RJ-45 connector
Leading EN50155 compliant Ethernet switch for rolling stock application
Supports 3U and 8HP CompactPCI form factor and hot swapping
PICMG 2.0 specification compatible
Support 8x10/100/1000Base-T(X) ports on CompactPCI sockets and 4x10/100/1000Base-T(X) ports on copper ports
Support Jumbo frame up to 9.6K Bytes
Supports O-Ring (recovery time < 30ms over 250 units of connection),
MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy
Open-Ring support the other vendor’s ring technology in open architecture
O-Chain allow multiple redundant network rings
Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
Supports IPV6 new internet protocol version
Support Modbus TCP protocol
Support IEEE 802.3az Energy-Efficient Ethernet technology
Provided HTTPS/SSH protocol to enhance network security
Supports SMTP client
Supports IP-based bandwidth management
Supports application-based QoS management
Supports Device Binding security function
Supports DOS/DDOS auto prevention
Supports SSH/Https security function
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
Support ACL, TACACS+ and 802.1x User Authentication for security
Multiple notification for warning of unexpected event
Windows utility (Open-Vision) support centralized management and
configurable by Web-based interface, Telnet and Console (CLI)
Support LLDP Protocol
Support hot-swappable technology
ORing’s CompactPCI series Ethernet switches are designed for industrial applications, such as factory automation, vehicle,
and railway applications.
CPGS-9120-C is CompactPCI managed redundant ring Ethernet switch with
12x10/100/1000Base-T(X) ports in CompactPCI socket which is specifically designed for the toughest and fully compliant with
EN50155 requirement.
The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of
connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or
temporary malfunctions with its fast recovery technology. CPGS-9120-C supports wide operating temperature from -40 oC
to 70 oC which can fulfill most of the requirement of operation environment.
Except the Web-based interface, Telnet and
* All specifications are subject to change without notice.
Designed for Rugged Excellence
console (CLI) configuration, CPGS-9120-C can also be managed centralized and conveniently by Open-Vision.
Therefore, the
switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
O-Ring : O-Ring is ORing’s proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to
250 nodes.
The O-Ring redundant ring technology can protect mission-critical application from network
interruptions or temporary malfunction with its fast recover technology.
Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing’s switches compatible with other
vendor’s proprietary redundant ring technologies.
vendor’s switch.
It enables ORing’s switches to form a single ring with other
In cases where the ring is setup using proprietary technology, ORing offers a compatibility service
where ORing can make its switches compatible with your particular network requirements.
O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy
topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy
protocols to join and function together as a larger and more robust compound network topology.
O-Chain providing
ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness in one set of
network redundancy topology.
MRP : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows
rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with
Spanning Tree Protocol.
IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit
the maximum bandwidth for each IP device.
User can configure IP camera and NVR with more bandwidth and limit
other device bandwidth.
Application-Based QoS : The switch also support application-based QoS.
Application-based QoS can set highest
priority for data stream according to TCP/UDP port number.
Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address
to access the network.
Hacker cannot access the IP surveillance network without permission.
It can avoid hacker
from stealing video privacy data and attacking IP camera, NVR and controllers.
Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention.
If there
is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the
It’s hardware based prevention so it can prevent DOS/DDOS attack immediately and completely.
Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.
IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and
backplane Ethernet family of networking standards that will allow for less power consumption during periods of low
data activity. The intention was to reduce power consumption by 50% or more.
Network connection
* All specifications are subject to change without notice.
Designed for Rugged Excellence
ORing’s switches are intelligent switches.
Different from other traditional redundant switches, ORing provides a set of
Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network.
Host Monitor
Topology View
I/O Functional
Console Port I/O
8-port Gigabit I/O
4-port Gigabit I/O
Power input
LED indicator
* All specifications are subject to change without notice.
Designed for Rugged Excellence
ORing Switch Model
Physical Ports
10/100/1000Base-T(X) Ports Auto
12-port (8-port with CompactPCI interface, 4-port with RJ-45 connector)
(PICMG 2.0 compatible)
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
Ethernet Standards
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table
Priority Queues
Switching latency: 7 us
Switching bandwidth: 24Gbps
Switch Properties
Max. Number of Available VLANs: 4096
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo frame
Up to 9.6K Bytes
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Security Features
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
Software Features
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy
MSTP ( STP / RSTP compatible)
RS-232 Serial Console Port
RS-232 in RJ45 connector with console cable.
115200bps, 8, N, 1
LED indicators
Power indicator (Power)
Green : Power LED x 1
Status Indicator (STA)
Green : Ethernet status indicator
R.M. indicator (R.M)
Green : indicate system operated in O-Ring Master mode
Ring indicator (Ring)
Green : indicate system operated in O-Ring mode
Fault indicator (Fault)
Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) port indicator
Green for port Link/Act.
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Power Input
CompactPCI bus powered (12VDC)
Power Consumption (Typ.)
7.5 Watts
Overload Current Protection
Physical Characteristic
Dimension (W x D x H)
40 (W) x 209 (D) x 130.7 (H)mm (1.58 x 8.23 x 5.15 inch)
Weight (g)
330 g
Storage Temperature
-40 to 85oC (-40 to 185oF)
Operating Temperature
-40 to 70oC (-40 to 158oF)
Operating Humidity
5% to 95% Non-condensing
Regulatory approvals
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Free Fall
5 years
Ordering Information
10/100/1000Base-T(X) Port Number
Additional Port Number
CompactPCI Version
- 12: 12 ports
- 0: 0 port
- C: PICMG 2.0 specification
Model Name
3U CompactPCI EN50155 12-port managed Gigabit Ethernet switch with
8x10/100/1000Base-T(X) in CompactPCI socket, and 4x10/100/1000Base-T(X) in
RJ-45 connector
Packing List
CPGS-9120-C x 1
ORing Tool CD x 1
Quick Installation Guide x 1
Console Cable x 1
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Optional Accessories
Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices
* All specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF