Specalog for 14M Motor Grader AEHQ7138-00

Specalog for 14M Motor Grader AEHQ7138-00
14M
Motor Grader
Engine
Engine Model
Base Power (1st gear) – Net
Base Power (1st gear) – Net (Metric)
VHP Range – Net
VHP Range – Net (Metric)
VHP Plus Range – Net
VHP Plus Range – Net (Metric)
Cat® C11 ACERT™ VHP
193 kW
259 hp
262 hp
193-205 kW 259-275 hp
262-279 hp
193-221 kW 259-297 hp
262-301 hp
Moldboard
Width
Weights
Gross Vehicle Weight – Typically Equipped
4.3 m
14 ft
24 375 kg
53,738 lb
Features
Operator Station
Industry leading cab design gives you unmatched
comfort, visibility and ease of use, so your operators
can be more confident and productive.
Structures, Drawbar, Circle and Moldboard
Durable structures with fast and simple DCM
adjustments save you service time. Shims and
wear inserts save you money and make it easy
to maintain factory tightness of components.
Hydraulics
Load sensing, proportional hydraulics mean
operators can rely on consistent power.
This precise, predictable implement response
will save time and help assure quality work.
Integrated Technologies
Grade control and machine monitoring
technologies help you improve grading
efficiency and enhance fleet management.
Safety
The safety of your operators and those on the job
site is key in the design of every Cat machine.
A long list of safety features help you meet your
goals of getting everyone home safely at the end
of each work day.
Contents
Operator Station ..................................................4
Steering and Implement Controls ....................5
Engine ...................................................................6
Power Train ..........................................................7
Structures and Drawbar-Circle-Moldboard ...8
Hydraulics ............................................................9
Safety ..................................................................10
Integrated Technologies ..................................12
Serviceability and Customer Support ............13
Sustainability .....................................................14
Work Tools and Attachments ..........................15
Specifications ....................................................16
Standard Equipment .........................................20
Optional Equipment...........................................21
Notes ...................................................................22
2
Cat M Series Motor Graders have become the industry standard in operational efficiency
and overall productivity. From building roads to maintaining them, M Series Motor Graders
are designed to help you get more work done in less time. Unprecedented operator
comfort and ease of service help to maximize your return on investment.
3
Operator Station
Comfort and productivity
Comfort and Control
Experience the most spacious, comfortable cab in the industry. Simple, intuitive joystick controls replace conventional levers,
steering wheel and transmission control handle so hand and arm movement is reduced by 78%, helping to reduce operator fatigue.
Rocker switches and control levers are in easy reach.
A standard Cat Comfort Series suspension seat and electronically adjustable control pods add even more to comfort and productivity.
Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment.
The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air,
seals out dust and keeps windows clear. A standard cage fan and dual pop-out louvers help improve fresh air circulation too.
An optional deluxe radio with CD features MP3 and Bluetooth technology.
Visibility
Good visibility is key to your safety and efficiency. Large windows make it easy to see the moldboard and tires, as well as behind the
machine. A rear vision camera is available to enhance your sight lines to the rear of the machine and an optional anti-icing window
feature will help keep windows clear during cold and snowy conditions.
In-Dash Instrument Cluster
Easy-to-read, high-visibility gauges and warning lamps keep you aware of critical system information. Cat Messenger offers
multi-lingual real-time machine performance and diagnostic data to help you get the most from your machine.
4
Steering and Implement Controls
Unprecedented precision and ease of operation
Two electro-hydraulic joysticks with electronically adjustable control
pods help position operators for optimal comfort, visibility and
productive operation.
Joystick Functions
The left joystick controls steering, articulation (with standard push-button
return-to-center feature), wheel lean, gear selection and directional
control, and left moldboard lift cylinder (with standard float capability).
The right joystick controls drawbar, circle and moldboard functions as
well as right moldboard cylinder (with standard float capability). It also
houses the electronic throttle control and manual differential lock/unlock.
The steer tire angle mirrors the joystick lean angle or position, providing
similar feel to steering. A brake tensioning system holds the joystick in
position until the operator moves it. The steering control automatically
reduces steering sensitivity at higher ground speeds.
A Programmable Auxiliary Hydraulic Pod controls up to six additional
hydraulic circuits.
Electronic Throttle Control
Operators get precise and consistent throttle operation, with automatic/
manual modes that allow you to adjust for application and operator
preferences.
Articulation Return-to-Center
Automatically returns the machine to a straight frame position from
any angle with the touch of a button.
Selectable Blade Lift Modes
Choose the blade lift modulation mode that best fits your application
or operating style: Fine, Normal, or Coarse.
5
Engine
Power and reliability
The Cat C11 engine with ACERT Technology gives you the performance to
maintain consistent grading speeds for maximum productivity. Superior torque
and lugging capability pulls through sudden, short-term load increases.
ACERT Technology lowers combustion chamber temperatures and
optimizes fuel combustion to generate more work output for your fuel cost.
Variable Horsepower (VHP) is standard, delivering additional horsepower
3.73 kW (5 hp) in forward gears 1-4 and reverse gears 1-3.
This balances traction, speed and horsepower to optimize rimpull and
conserves fuel. VHP Plus is optional, giving you an additional 3.73 kW (5 hp)
in gears 5-8 for more power at higher speeds.
Hydraulic Demand Fan
The hydraulic demand fan automatically adjusts fan speed to
meet engine cooling requirements. When demand is reduced,
you benefit from more power to the ground and improved
fuel efficiency.
Ether Starting Aid
A standard ether starting aid helps cold-weather startups
in extreme temperatures.
Engine Idle Shutdown Timer
This standard feature can be software-enabled by your
Cat dealer to shut down the engine after a set period
of time to save you fuel and help reduce emissions.
6
Power Train
Maximum power to the ground
We designed the 14M to give you efficiency and longevity in your most
demanding applications.
• Optional Automatic Differential Lock unlocks the differential during
a turn and re-locks when straight for easier operation and improved
power train protection.
• Full Electronic Clutch Pressure Control (ECPC) system optimizes
inching modulation, smooth shifts and directional changes, reducing
stress on gears.
• Optional Programmable Autoshift simplifies operation by allowing
the operator to program the transmission to shift at optimal points
to match your application.
• Power Shift Countershaft Transmission is directly matched to the
Cat engine to maximize power to the ground.
• Eight forward and six reverse gears are specifically designed to
give you a wide operating range for maximum productivity in all
earthmoving applications.
• Engine Over-Speed Protection prevents downshifting until
an acceptable safe travel speed has been established.
Front and Rear Axles
The sealed spindle keeps front axle bearings lubricated and protected
from contaminants. The Cat “Live Spindle” design places the larger
tapered roller bearing on the outside, where the load is greater,
extending bearing life.
A bolt-on modular rear axle improves serviceability and contamination
control with easy access to differential components.
Hydraulic Brakes
Oil-bathed multi-disc service brakes are hydraulically actuated for
smooth, predictable braking and lower operating costs. Brakes are
located at each tandem wheel for a large total brake surface area
to give you dependable stopping power and longer life.
7
Structures and Drawbar-Circle-Moldboard
Service ease and precise blade control
Caterpillar designs frame and drawbar components for
performance and durability in heavy duty applications.
The one-piece forged steel circle stands up to high
stress loads, and a sacrificial wear system helps
keep your service time and costs down.
The articulation hitch features a large tapered roller
bearing to carry loads evenly and smoothly. It is sealed
to prevent contamination and a locking pin prevents
articulation for safety during service or transport.
Easy Maintenance for More Uptime
The drawbar, circle and moldboard are designed to
make it easy to keep the components tight. One person
can easily adjust or replace the patented top-adjust
drawbar wear inserts from the top of the drawbar plate,
reducing downtime to save you money. Durable nylon
composite wear inserts maximize circle torque and
component life. Sacrificial brass wear strips between
the blade mounting group and moldboard can be easily
adjusted and replaced. Shimless Moldboard Retention
System uses vertical and horizontal adjusting screws
to keep moldboard wear strips aligned for reduced
blade chatter and precise blade control.
Blade Angle and Moldboard
Aggressive blade angle allows material to roll more
freely along the blade for better material control.
Heat-treated rails, hardened cutting edges and end bits,
and heavy duty bolts to give you greater moldboard
reliability and long service life. The 5-position link bar
allows extreme moldboard positioning for easier bank
sloping and ditch cutting/cleaning.
8
Hydraulics
Precise, predictable control
Responsive Hydraulics
A proven load-sensing system and advanced electro-hydraulics give you superior
implement control and responsive hydraulic performance to make your operator’s job
easier. Continuously matching hydraulic flow/pressure to power demands creates less
heat and reduces power consumption.
• Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates
for the head and rod ends of the cylinder, so you can count on consistent, predictable
implement response.
• Hydraulic flow is proportioned to give you confidence that all implements will operate
simultaneously without slowing the engine or speed of some implements.
Blade Float
Allows the blade to move freely under its own weight. By floating both cylinders, the blade
can follow the contours of the haul road. Floating only one cylinder permits the toe of the
blade to follow a hard surface while the operator controls the slope with the other lift cylinder.
Independent Oil Supply
Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil
cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows
high pressures for maximum power and reduced downtime.
9
Safety
Designed with protection in mind
M Series Safety Features
• Grouped, ground level service points
• Laminated front window glass
• Optional LED Lighting
• Ground-level electrical disconnect switch
• Ground-level engine shutoff switch
• Glare reducing paint for night operation
10
Operator Presence Monitoring System
Standard feature keeps the parking brake engaged and hydraulic implements
disabled until the operator is initially seated and the machine is ready for operation.
Speed Sensitive Steering
Standard function makes steering less sensitive as ground speed increases
for greater operator confidence and control.
Secondary Steering System
Standard system automatically engages an electric hydraulic pump in case of
a drop in steering pressure so the operator can steer the machine to a stop.
Hydraulic Lockout
Disables all implement functions while still providing machine steering control.
This standard safety feature is especially useful while roading.
Brake Systems
Brakes at each tandem wheel eliminate braking loads on the power train.
Redundant brake systems utilize accumulators to enable stopping in case
of engine failure.
Walkways and Grab Rails
Perforated steel tandem walkways and convenient grab rails offer a sturdy
platform and support for moving on, off and around the machine.
Rearview Camera
An optional rear vision camera with in-cab monitor helps enhance your sight
lines to the rear of the machine.
Circle Drive Slip Clutch
Protects the drawbar, circle and moldboard from shock loads when the blade
encounters an immovable object. This standard feature also reduces the
possibility of abrupt directional changes in poor traction conditions.
Blade Lift Accumulators
Help absorb impact loads to the moldboard by allowing vertical blade travel.
This optional feature helps reduce wear and aids operator safety.
11
Integrated Technologies
Solutions to make work easier and more efficient
Cat Grade Control
Cat Grade Control Cross Slope is an optional fully integrated, factory installed
system that helps your operator more easily maintain desired cross slope by
automatically controlling one side of the blade. The system is job-ready from
day one, and scalable with AccuGrade™ upgrade kits that provide additional
2D and/or 3D control.
AccuGrade Attachment Ready Option
The AccuGrade Attachment Ready Option can be ordered as a factory
or dealer-installed option. It includes built-in mounting points and internal
wiring to make installation of the AccuGrade system faster and easier.
Cat AccuGrade
AccuGrade uses positioning and guidance technologies, machine sensors,
and automatic blade control to help your operators get to grade faster, easier
and more efficiently. Digital design plans, real-time cut/fill data, and in-cab
guidance give operators detailed information to work more confidently and
accurately, in fewer passes, using less material. Operators can stay on grade
and improve productivity and accuracy by nearly 50 percent over conventional
methods. Grade stakes and checkers are minimized, helping to make the work
site safer and more cost effective. AccuGrade technologies include Cross Slope,
Sonic, Laser, GPS, and/or Universal Total Station (UTS).
Cat Product Link™
Product Link gives you remote monitoring capabilities for one machine or your
entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time
and more through the secure VisionLink® user interface. Knowing where your
equipment is and how it’s performing enables you or your Cat dealer to manage
your fleet in real-time so you can maximize efficiency, improve productivity
and lower operating costs.*
*Product Link licensing not available in all areas. Please consult your
Cat dealer for availability.
12
Serviceability and
Customer Support
When uptime counts
Cat motor graders are designed to help you increase uptime
and reduce costs. Grouped service points and extended service
intervals save maintenance time. Optional Fast-Fill allows you
to refuel in less than two minutes to get back on the job quickly.
Advanced Diagnostics
• Cat Messenger, combined with full systems integration,
enhances diagnostic capability for quick analysis of
critical data.
• Electronic Technician (Cat ET) lets service technicians
access stored diagnostic data and configure machine
parameters through the Cat Data Link.
• Low Battery Elevated Idle raises idle speed when low system
voltage is detected, ensuring adequate system voltage and
improving battery reliability.
• Automatic Engine Deration protects the engine by
automatically lowering engine torque output and alerting
the operator if critical conditions are detected.
Unparalleled Dealer Support
When it comes to supporting you, Cat dealers are second to
none. From machine selection and purchase to maintenance
support and rebuilds, Cat dealers have the experience and
capabilities to keep you up and running.
13
Sustainability
Thinking generations ahead
Fuel Efficiency
• Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work
per gallon/liter of fuel.
Green House Gas Emissions
• Emissions reduction technologies reduce NOX + HC (hydrocarbon) emissions by 38% (g/kW-hr) as compared to the previous model.
Material Efficiency and Lifecycle Costs
• Replaceable wear parts save maintenance time and cost, and extend major component life.
• Major components are built to be rebuilt, eliminating waste and saving you money by giving the machine and/or major components
a second – and even third – life.
• Machine is built with a 97% recyclability rate (ISO 16714) to conserve valuable natural resources and further enhance machine
end-of-life value.
Sound
• Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.
Safety
• A variety of safety features help safeguard operators and others on the job site.
14
Work Tools and Attachments
Equip your machine for the job
Moldboard Options
A 4.3 m (14 ft) moldboard is standard on the
14M, with a 4.9 m (16 ft) moldboard available
as an option.
Ground Engaging Tools (GET)
A variety of tools are available from Cat Work Tools,
including cutting edges, graderbits and end bits,
all designed for maximum service life and
productivity.
Front Mounted Groups
A front mounted push plate/counterweight or front lift group are
available. The front lift group can be combined with a front dozer
blade for added versatility.
Rear Ripper/Scarifier
Made to penetrate tough material fast and rip thoroughly for easier
movement with the moldboard. The ripper includes three shanks
with the ability to add four more for additional versatility.
15
14M Motor Grader Specifications
Engine
Engine Model
Base Power (1st gear) – Net
Base Power (1st gear) – Net (Metric)
VHP Range – Net
VHP Range – Net (Metric)
VHP Plus Range – Net
VHP Plus Range – Net (Metric)
Displacement
Bore
Stroke
Torque Rise
Maximum Torque (VHP Plus) – Net
Speed @ Rated Power
Number of Cylinders
Derating Altitude
Standard – Fan speed
Maximum
Minimum
Standard – Ambient Capability
High Ambient – Fan speed
Maximum
Minimum
High Ambient Capability
14M Net Power
Cat C11 ACERT VHP
193 kW
259 hp
262 hp
193-205 kW 259-275 hp
262-279 hp
193-221 kW 259-297 hp
262-301 hp
11.1 L
677 in3
130 mm
5.1 in
140 mm
5.5 in
21%
1422 N·m
1,049 lbf-ft
1,800 rpm
6
3962 m
13,000 ft
1,450 rpm
550 rpm
43° C
VHP
193 kW
197 kW
201 kW
205 kW
205 kW
205 kW
205 kW
205 kW
VHP+
193 kW
197 kW
201 kW
205 kW
209 kW
213 kW
217 kW
221 kW
Forward/Reverse Gears
Transmission
Brakes
Service
Service, Surface Area
Parking
Secondary
1,650 rpm
550 rpm
50° C
VHP
259 hp
265 hp
270 hp
275 hp
275 hp
275 hp
275 hp
275 hp
VHP+
259 hp
265 hp
270 hp
275 hp
281 hp
286 hp
291 hp
297 hp
Power Train
109° F
8 Forward/6 Reverse
Direct drive, power shift,
Countershaft
Oil-actuated, oil-disc
34 500 cm2 5,347 in2
Spring applied,
hydraulically released
Oil-actuated, oil-disc
Hydraulic System
122° F
• Power as declared per ISO 14396
Rated Speed = 1,800 rpm
VHP = 206 kW (277 hp)
VHP Plus = 222 kW (298 hp)
• VHP Plus is an optional attachment.
• Net power advertised is the power available at rated speed of
1,800 rpm, measured at the flywheel when engine is equipped
with fan running at minimum speed, air cleaner, muffler
and alternator.
• No engine derating required up to 3962 m (13,000 ft).
16
Gear
1/1R
2/2R
3/3-6R
4
5
6
7
8
Circuit Type
Pump Type
Pump Output
Maximum System Pressure
Standby Pressure
• Pump output measured at 2,150 rpm.
Electro-hydraulic load
sensing, closed center
Variable piston
280 L/min
74 gal/min
24 150 kPa 3,500 psi
3100 kPa
450 psi
Operating Specifications
Top Speed
Forward
Reverse
Turning Radius, Outside Front Tires
Steering Range – Left/Right
Articulation Angle – Left/Right
Forward
1st
2nd
3rd
4th
5th
6th
7th
8th
Reverse
1st
2nd
3rd
4th
5th
6th
Frame
50.4 km/h
39.8 km/h
7.9 m
47.5°
20°
31.3 mph
24.7 mph
25 ft 11 in
4.4 km/h
6.0 km/h
8.7 km/h
12.0 km/h
18.5 km/h
25.1 km/h
34.6 km/h
50.4 km/h
2.7 mph
3.7 mph
5.4 mph
7.4 mph
11.5 mph
15.6 mph
21.5 mph
31.3 mph
3.5 km/h
6.5 km/h
9.4 km/h
14.6 km/h
27.3 km/h
39.8 km/h
2.2 mph
4.0 mph
5.9 mph
9.1 mph
17.0 mph
24.7 mph
492 L
46.5 L
64 L
30 L
89 L
130 gal
12.3 gal
16.9 gal
7.9 gal
23.5 gal
106 L
0.9 L
28.0 gal
0.2 gal
10 L
2.6 gal
Service Refill
Fuel Capacity
Cooling System
Hydraulic System – Tank
Engine Oil
Transmission/Differential/
Final Drives
Tandem Housing (each)
Front Wheel Spindle
Bearing Housing
Circle Drive Housing
Circle
Diameter
Blade Beam Thickness
Drawbar
Height
Width
Front Frame Structure
Height
Width
Thickness
Front Axle
Height to Center
Wheel Lean, Left/Right
Total Oscillation per Side
1822 mm
50 mm
71.8 in
2 in
203.2 mm
76.2 mm
8 in
3 in
406.4 mm
304.8 mm
15.9 mm
16 in
12 in
0.6 in
640 mm
17.1°
32°
25.2 in
616 mm
214 mm
24.3 in
8.4 in
20 mm
20 mm
57 mm
1656 mm
0.8 in
0.8 in
24.2 in
65 in
Tandems
Height
Width
Sidewall Thickness
Inner
Outer
Drive Chain Pitch
Wheel Axle Spacing
Tandem Oscillation
Front Up
Front Down
15°
25°
Moldboard
Moldboard
Width
Height
Thickness
Arc Radius
Throat Clearance
Cutting Edge
Width
Thickness
End Bit
Width
Thickness
Blade Pull
Base
Maximum
Down Pressure
Base
Maximum
4.3 m
688 mm
25 mm
413 mm
117 mm
14 ft
27 in
1 in
16.3 in
4.6 in
203 mm
16 mm
8 in
0.6 in
152 mm
16 mm
6 in
0.6 in
14 117 kg
18 352 kg
31,123 lb
40,460 lb
10 123 kg
16 662 kg
22,318 lb
36,734 lb
• Blade pull calculated at 0.9 traction coefficient, which is equal
to ideal no-slip conditions, and Gross Machine Weight.
17
14M Motor Grader Specifications
Blade Range
Circle Centershift
Right
Left
Moldboard Sideshift
Right
Left
Maximum Blade Position Angle
Blade Tip Range
Forward
Backward
Maximum Shoulder Reach Outside of
Right
Left
Maximum Lift Above Ground
Maximum Depth of Cut
Weights
520 mm
650 mm
20.5 in
25.5 in
790 mm
740 mm
65°
31.1 in
29.1 in
40°
5°
Tires
2279 mm
2169 mm
419 mm
438 mm
89.7 in
85.4 in
16.5 in
17.3 in
18
47,230 lb
12,648 lb
34,582 lb
65,773 lb
20,816 lb
44,957 lb
53,738 lb
13,704 lb
40,034 lb
• Base operating weight calculated on standard machine
configuration with 16.0R24 radial (G-2) tires, full fuel tank,
coolant, lubricants and operator.
Standards
Ripper
Ripping Depth, Maximum
Ripper Shank Holders
Shank Holder Spacing
Minimum
Maximum
Penetration Force
Pryout Force
Machine Length Increase,
Beam Raised
Gross Vehicle Weight – Base
Total
21 423 kg
Front Axle
5737 kg
Rear Axle
15 686 kg
Gross Vehicle Weight – Maximum
Total
29 834 kg
Front Axle
9442 kg
Rear Axle
20 392 kg
Gross Vehicle Weight – Typically Equipped
Total
24 375 kg
Front Axle
6216 kg
Rear Axle
18 159 kg
401 mm
7
15.8 in
373 mm
472 mm
12 348 kg
12 767 kg
1156 mm
15 in
19 in
27,222 lb
28,146 lb
45.5 in
ROPS/FOPS
Steering
Brakes
Sound
ISO 3471/ISO 3449
ISO 5010:1992
ISO 3450
ISO 6394/ISO 6395
• The static operator sound pressure level is 73 dB(A) when
“ISO 6394:2008” is used to measure the value for an enclosed
cab. The measurement was conducted with the cab doors and
the cab windows closed. The cab was properly installed and
maintained.
• The dynamic spectator sound pressure level is 107 dB(A) when
“ISO 6395:2008” is used to measure the value for an enclosed
cab. The measurement was conducted at 70% of the maximum
engine cooling fan speed.
Dimensions
1 Height – Top of Cab
Height – Top of Cab Product Link (cell)
3535 mm
3747 mm
148 in
2 Height – Front Axle Center
3 Length – Between Tandem Axles
630 mm
24.8 in
4 Length – Front Axle to Moldboard
5 Length – Front Axle to Mid Tandem
139 in
1656 mm
62.2 in
2840 mm
112 in
6559 mm
258 in
6 Length – Front Tire to Rear of Machine
7 Length – Counterweight to Ripper
9349 mm
368 in
10 896 mm
429 in
Length – Push Plate to Ripper Retracted
10 632 mm
419 in
369 mm
14.5 in
2835 mm
112 in
8 Ground Clearance at Rear Axle
9 Height to Top of Cylinders
10 Height to Exhaust Stack
11 Width – Tire Center Lines
12 Width – Outside Rear Tires
13 Width – Outside Front Tires
3245 mm
128 in
2366 mm
93.1 in
2801 mm
110 in
2801 mm
110 in
All dimensions are approximate, based on standard machine configuration with 16.0R24 radial (G-2) tires.
Optional Tire Arrangements
Common tire options for the 14M.
Rim Size
10 × 24
17 × 25
Wheel Group
Multi-piece
Multi-piece
Tires
16.0R24
20.5R25
Note: Consult your dealer for individual tire width, size, and brand.
19
14M Standard Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
• Accelerator
• Air Conditioning with heater
• Arm and wrist rest, adjustable
• Articulation, automatic Return-to-Center
• Cat Messenger, operator information system
• Centershift pin indicator
• Coat hook
• Cup holder
• Display, digital speed and gear
• Doors, left and right side with wiper
• Gauge, machine level
• Gauge cluster (analog) inside the cab – articulation, engine coolant
temp, engine RPM, fuel, and hydraulic oil temp
• Hour meter, digital
• Joystick hydraulic controls implements, steering, transmission
• Lights, night time cab
• Mirror, inside rearview, wide angle
• Power port, 12V
• Radio Ready, Entertainment
• ROPS cab, sound suppressed
• Seat, cloth-covered, comfort suspension
• Seat belt, retractable 76 mm (3 in)
• Storage area for cooler/lunchbox
• Throttle control, electronic
• Windows: laminated glass
– fixed front with intermittent wiper
– side and rear (3)
POWER TRAIN
• Air cleaner, dual stage, dry type, automatic dust ejector,
service indicator through Cat Messenger
• Air-to-air after cooler (ATAAC)
• Belt, serpentine, automatic tensioner
• Brakes, four-wheel hydraulic
• Differential, lock/unlock
• Drain, engine oil, ecology
• Electronic over speed protection
• Engine, Cat C11 with ACERT Technology
• Engine Idle Shutdown (EIS)
• Ether starting aid
• Fuel-water separator
• Hydraulic demand fan
• Muffler, under hood
• Parking brake – multi-disc, sealed, oil-cooled
• Priming pump, fuel
• Rear axle, modular
• Sediment drain, fuel tank
• Transmission, 8F/6R, power shift, direct drive
• VHP (Variable Horsepower)
ELECTRICAL
• Alarm, back up
• Alternator, 80 ampere, sealed
• Batteries, maintenance free, heavy duty, 1,125 CCA
• Breaker panel, ground accessible
• Electrical system, 24V
• Grade Control Ready – Cab harness, software, electrical hydraulic
valves, bosses and brackets
• Lights, reversing
• Lights, roading, roof-mounted
• Lights, stop and tail, LED
• Product Link Ready
OTHER STANDARD EQUIPMENT
• Brake accumulators, dual certified
• Bumper, rear, integrated with hitch
• CD ROM Parts Book
• Clutch, circle drive slip
• Cutting edges
– curved DH-2 steel
– 203 mm × 16 mm (8 in × 5/8 in)
– 19 mm (3/4 in) mounting bolts
• Doors (3), engine compartment, locking
• Drawbar – 6 shoe with replaceable wear strips
• Endbits
– 16 mm (5/8 in) DH-2 steel
– 19 mm (3/4 in) mounting bolts
• Extended Life Coolant to –35° C (–30° F)
• Fluid check, ground level
• Frame, articulated, with safety lock
• Fuel tank, 492 L (130 gallon), ground level access
• Guards, debris, underside
• Guards, service center debris
• Ground level engine shutdown
• Hammer (emergency exit)
• Horn, electric
• Hydraulics, base 8 implement controls
• Hydraulics, load-sensing
• Lockout, hydraulic implement for roading
• Moldboard
– 4287 mm × 686 mm × 25 mm (14 ft × 27 in × 1 in)
hydraulic sideshift and tip
• Paint, glare reducing – top of front frame and rear enclosure
• Radiator cleanout access
• Secondary steering
• Serviceability, LH side
• S•O•SSM ports: engine, hydraulic, transmission, coolant, fuel
• Tandem walkway/guards
• Tool box
• Tow hitch
TIRES, RIMS, & WHEELS
• Partial allowance for tires and multi-piece rims
20
14M Optional Equipment
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
kg
ELECTRICAL
Alternator, 150 ampere 2
Batteries:
extreme duty,
14
1,400 CCA
Converter,
5
communications (CB)
Lights:
5 Lighting Arrangements and
Rear Roading, Drop Down
Warning, LED strobe 1
Starter, electric,
10
heavy duty
GUARDS
Covers, screen
Transmission
Sound
4
156
91
OPERATOR ENVIRONMENT
Deluxe CD radio with
MP3 and Bluetooth
technology
Fan, defroster,
2
rear window
Horn, air
7
Mirrors, outside:
heated 24V
15
mounted
10
Precleaner, HVAC
5
Seat, air suspension,
2
cloth
lb
5
Shade, sun
Wiper, each side
Wiper/washer, rear
kg
lb
2
0
2
5
1
4
30
11
2
21
9
344
200
4
15
33
22
10
5
POWER TRAIN
Automatic Differential
Lock/Unlock
Engine, Variable
Horsepower Plus
(VHP Plus)
Fuel tank, fast fill
14
Precleaner, Sy-Klone
5
Transmission, autoshift 2
OTHER ATTACHMENTS
AccuGrade ARO
39
Accumulators,
71
blade lift
AutoLube, Lincoln
23
AutoLube, Lincoln,
5
ripper enhancement
Cat Grade Control
75
Cross Slope
Camera, rearview
27
Caterpillar Product
5
Link 321SR
Compressor/tank, Air 23
Fenders, rear
184
Heater, engine coolant:
120V
1
240V
1
31
10
5
85
156
50
10
165
60
10
50
405
kg
lb
Hydraulic arrangements with one or more
additional hydraulic valves are available for
rear ripper, dozer, snow plow and snow wing.
Security system
2
5
Snow wing mounting, 91
200
frame ready
Sound suppression
11
25
WORK TOOLS/
GROUND ENGAGING TOOLS
Blade/moldboard,
136
4877 mm × 686 mm
× 25 mm (16 ft × 27 in
× 1 in)
Cutting Edges, curved 43
Push plate,
851
counterweight
Ripper, mounting
34
Ripper, rear
1552
Ripper tooth
28
299
95
1,875
75
3,421
61
MACHINE ARRANGEMENTS
Canadian
Arrangement
European
Arrangement
Snow Arrangement
3
3
21
Notes
22
23
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web
at www.cat.com
© 2013 Caterpillar Inc.
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEHQ7138 (10-2013)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising