2K7_MV1_NW&TestEquip_2.qxd 198 01/31/07 8:18 AM Page 198 Networking and Other Equipment > Network / Cable Test Equipment Item # Description List Price AEMC CA7024 TDR Fault Mapper The AEMC Fault Mapper is a hand-held, alpha-numeric, TDR (Time Domain Reflectometer) Cable Length Meter and Fault Locator, designed to measure the length of electrical and communication cables. It can also indicate the distance to a fault in the cable (open or short), given access to only one end of a two or more conductor cable. By incorporating fast-edge step TDR technology, the CA7024 measures cable length and indicates the distance to open or short circuit faults to a range of 6000 ft (2000m), on virtually any type of cable. The CA7024 indicates the cable length or fault distance and description alpha-numerically on a 128 x 64 graphical LCD. Includes soft carrying case, BNC pigtail cable with alligator clips, four 1.5V AA batteries and user manual. AEMC-CA7024 AEMC-CA7024 TDR Fault Mapper 495.00 AEMC CA7026 Fault Mapper Pro Tele/Coax/Parallel Cable Tester AEMC-CA7024 AEMC-CA7024 AEMC-CA7026 AEMC-CA7026 The Fault Mapper Pro is a hand-held graphical TDR (Time Domain Reflectometer) designed for identifying and locating faults on power and communication cables, given access to one end only. The CA7026 measures cable length and indicates the distance to fault cables and terminations to a range of 11,700 ft (3500m) on virtually any type of cable of two or more conductors. The CA7026 shows a reflection profile of the cable under test as an oscilloscopelike trace on a 128 x 64 pixel graphical LCD. A movable cursor can be aligned with points on the trace; the distances displayed will automatically update the cursor position. Includes soft carrying case, BNC pigtail cable with alligator clips, four 1.5V AA batteries and user manual. AEMC-CA7026 AEMC-CA7026 Fault Mapper Pro Tele / Coax / Parallel Cable Tester 795.00 AEMC CA7028 Wire Mapper Pro LAN Cable Tester AEMC-TR02 AEMC-TR02 AEMC-CA7028 AEMC-CA7028 AEMC-TR02 The Wire Mapper Pro is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP and SSTP cabling equipped with RJ45 connectors and wired to either TIA568A/B (ISO 11801 and EN 50137), USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The CA7028 has the ability to measure and indicate the length of the cable under test, using a Vp (Velocity of Propagation) set by the user, from a built-in library or manually. It will measure and report the length of all four pairs of wires in the cable under test. It also generates an audible tone that is transmitted into all four pairs on the cable under test. Includes soft carrying case, remote ID (#1), two patch cords, four 1.5V AA batteries and user manual. AEMC-CA7028 AEMC-CA7028 Wire Mapper Pro LAN Cable Tester 495.00 AEMC TR02 Tone Receiver/Cable Tracer The TR02 Tone Receiver/Cable Tracer is a small, hand-held tracer that will aid in the identification of tone carrying wires without piercing their insulation. It has a self-contained amplifier and a rugged, moisture resistant mylar cone speaker. When used in conjunction with the tone transmitter function of the AEMC cable testers CA7024, CA7026 or CA7028, wire tracing and locating is quick and efficient. AEMC-TR02 AEMC-TR02 FNMT8200-32A FNMT8200-32A Tone Receiver / Cable Tracer 49.00 Fluke Networks MicroScanner™ Pro Network Tester The Fluke Networks MicroScanner Pro is an all-in-one pocket sized network tester that tests both coaxial (RG6, RG59, etc. for CATV/CCTV) and all twisted pair cable (UTP/STP/SSTP). The MicroScanner features an active network identification mode that flashes hub ports and shows if a network tap is operating at 10Mbps or 10/100Mbps and whether it is full or half duplex capable. MicroScanner Pro ensures basic continuity and correct terminations by verifying end-to-end continuity on all four-wire pairs and if the cable under test has the correct wiring scheme (either 568A or 568B). The MicroScanner Pro quickly identifies a fault allowing you to see opens, shorts, crossed pairs, split pairs or any miswires. With the push of a button, MicroScanner Pro's length function uses Time Domain Reflectometry (TDR) to measure the full length of a cable. It determines whether the cable is open or shorted and the distance to the fault. The length measurement is also useful for billing and inventory purposes. MicroScanner Pro's Toner function allows installers to generate a tone for the optional MicroProbe to trace and locate hidden cabling in walls, ceilings or distributions boxes. FNMT8200-32A FNMT8200-32A Fluke MicroScanner Pro Network Tester 549.00 Fluke Networks MicroMapper™ Network Tester FNMT8200-49A FNMT8200-49A FNMT8200-53A FNMT8200-53A The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable. MicroMapper's built-in tone generator works with the IntelliTone Probe allowing you to trace cable through walls, floors, and ceilings. The MicroMapper also includes a remote unit that allows one person to test installed cabling or patch cords. The MicroMapper kit includes: MicroMapper and MicroMapper Remote, patch cable, 6-volt alkaline battery and user guide. FNMT8200-49A FNMT8200-49A FNMT8200-53A FNMT8200-53A Fluke Networks MicroMapper Network Tester Fluke IntelliTone 100 Probe 139.00 89.00 Fluke Networks IntelliTone 100 Toner and Probe Kit FNMT8200-50A FNMT8200-50A The Fluke Networks IntelliTone 100 Toner and Probe Kit allows users to quickly identify network ports and cables using digital signaling methods. Simply attach the IntelliTone Toner to a cable and set the sensing mode on the IntelliTone Probe. IntelliTone technology energizes cable conductors with a smart, synchronized digital signal. Multiple tone types occur in the signal that help you to locate, isolate and validate a cable. Includes: IntelliTone 100 Toner and 100 Probe, coax F connector adapter, RJ11 and RJ45 patch cables, test leads with alligator clips, lanyards, owners CD and quick start guide, (2) 9 volt batteries. FNMT8200-50A FNMT8200-50A Fluke Networks IntelliTone 100 Toner and Probe Kit 159.00 Fluke Networks NetTool™ Inline Network Tester Fluke Networks NetTool Inline Network Tester comes packed with the features IT professionals need. The NetTool can be connected inline between two network devices, listen to the traffic between them and detect common connectivity problems. The NetTool can also automatically ping key devices to verify connection to routers, servers and printers. Users will be able to spot available network resources by seeing MAC and IP addresses, subnet and services offered by active servers, routers and printers. The NetTool Tester can also look for the common wiring problems by testing for cable length, shorts, split pairs or opens, including pin-to-pin wiremap. Users will be able to download test results to document network performance and generate network resource reports. Includes 4 AA batteries and a 1-year manufacturer's warranty. FNT-PRO FNT-PRO FNT-PRO FNT-PRO One or more items in a product family are RoHS compliant and/or partially compliant. Access www.L-com.com for latest status. Fluke Networks NetTool Inline Network Tester L-com ® CONNECTIVITY PRODUCTS 2007 Master Catalog 1.0 Prices and specifications subject to change. 2100.00 E-mail: sales@L-com.com Fax: 978-689-9484 Toll Free: 1-800-343-1455 Hours: Mon - Thu 8am-6pm, Fri 8am-5pm EST © 2007 L-com, Inc. All Rights Reserved. L-com Connectivity Products and the L-com logo are registered marks.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project