TIG Welders, Plasma Cutter Digital Range - R

TIG Welders, Plasma Cutter Digital Range - R
ENGINEERING THE FUTURE
THE R-TECH DIGITAL SERIES
TIG WELDERS & PLASMA CUTTERS
R-Tech TIG210
FEATURES &
SPECIFICATIONS
Full function digital control panel designed for easy
use ‐ control all setup and machine parameters
from a single button ‐ Easy start and finish set‐up.
• 10 job auto memory store
• Power Factor Correction ‐ Gives lower running
costs and higher energy efficiency, cleans noisy
power supplies & is 100% generator friendly
• 3 AC Waveforms
The R‐Tech TIG210 PFC is a 210A AC/DC TIG
welder with 240V input, power factor correction,
electronic HF starting, fully featured pulse welding,
slope up/down, twin LED display, high duty
cycle and a remote foot pedal option
Square Wave: fast cooling weld pool, deep
penetration and fast travel speed
Sine Wave: Low arc noise, for a traditional arc
Triangular Wave: designed for thin alloys,
reduces heat input
• Electronic HF ‐ improved arc starting and less
interference
• Lift start option
• Amperage Range: 5 to 210 Amps (DC TIG)
• Amperage Range: 10 to 210 Amps (AC TIG)
• Amperage Range: 10 to 160 Amps (Stick)
• AC Frequency: 15‐200Hz
• Pulse width: 0.1‐1.0s
• 35% Duty Cycle at 210A (TIG)
100% Duty Cycle at 120A (TIG)
• 35% Duty Cycle at 150A (MMA)
100% Duty Cycle at 100A (MMA)
• Input voltage: 240v (Input Amerage: 16 A)
• Pulse Frequency AC: 0.5‐10Hz
• Pulse Frequency DC: 0.5‐500Hz
• Dimensions: 420 x 210 x 445 mm Weight: 17kg
• VRD Voltage Reduction in MMA ‐ reduces OCV
in standby for increased user safety
• Full 4‐way functioning with control of pre/post
flow gas, initial/final amps, slope up/down
• Generator Friendly ‐
Recommended minimum size: 8KVA
• Insulation class IP23
• Dual LED displays for pre‐set and actual amps
• MMA Anti‐Stick & Hot Start technology
• Remote Foot Pedal Option
• Package includes: WP26 TIG torch (4m), earth
lead & clamp, gas hose, regulator & owners manual
3 Year Warranty
Your local distributor
tech
For more information visit:
www.r-techwelding.co.uk
Specifications made be subject to change without notice.
R-Tech TIG500
FEATURES &
SPECIFICATIONS
Full function digital control panel designed for easy
use ‐ control all setup and machine parameters
from a single button ‐ Easy start and finish set‐up.
• 10 job auto memory store
• 3 AC Waveforms
The R‐Tech TIG500 is a power packed 500A AC/DC
TIG welder with 415V input, electronic HF starting,
fully featured pulse welding, 3 AC Waveforms,
twin LED display and a high duty cycle. A remote
foot pedal option is also available
Square Wave: fast cooling weld pool, deep
penetration and fast travel speed
Sine Wave: Low arc noise, for a traditional arc
Triangular Wave: designed for thin alloys, reduces
heat input
• Electronic HF ‐ improved arc starting and less
interference
• Lift start option
• Amperage Range: 5 to 500Amps (DC TIG)
• Amperage Range: 10 to 500 Amps (AC TIG)
• Amperage Range: 10 to 400 Amps (Stick/MMA)
• AC Frequency: 15‐200Hz
• Pulse width: 0.1‐1.0s
• 20% Duty Cycle at 500A (TIG)
• 60% Duty Cycle at 300A (TIG)
100% Duty Cycle at 265A (TIG)
• 25% Duty Cycle at 400A (MMA)
60% Duty Cycle at 275A (MMA)
100% Duty Cycle at 245A (MMA)
• Input voltage: 415v; Input Amperage: 32A
• Fuse Rating: 32 Amps
• Pulse Frequency AC: 0.5‐10Hz
• Pulse Frequency DC: 0.5‐500Hz
• Dimensions: 490 x 255 x 480 mm Weight: 29kg
• VRD Voltage Reduction in MMA ‐ reduces OCV
in standby for increased user safety
• Full 4‐way functioning with control of pre/post
flow gas, initial/final amps, slope up/down
• Generator Friendly ‐ Recommended minimum
size: 18KVA
• Insulation class IP23S
• Dual LED displays for pre‐set and actual amps
• MMA Anti‐Stick & Hot Start technology
• Remote Foot Pedal Option
• Package includes: WP26 TIG torch (4m), earth
lead & clamp, gas hose, regulator & owners manual
3 Year Warranty
Your local distributor
tech
For more information visit:
www.r-techwelding.co.uk
Specifications made be subject to change without notice.
R-Tech TIG320
AC/DC TIG WELDER
FEATURES &
SPECIFICATIONS
Full function digital control panel designed for easy
use ‐ control all setup and machine parameters from
a single button ‐ Easy start and finish set‐up.
• 10 job auto memory store
• 3 AC Waveforms
Square Wave: fast cooling weld pool,
deep penetration and fast travel speed
Sine Wave: Low arc noise, for a traditional arc
The R‐Tech TIG320 is a power packed 320A AC/
DC TIG welder with 415V input, easy to use
digital control panel, electronic HF starting,
fully featured pulse welding, 3 AC Waveforms,
twin LED display and a high duty cycle.
A remote foot pedal is also available.
Triangular Wave: designed for thin alloys,
reduces heat input
• Electronic HF ‐ improved arc starting,
less interference and lift start option
• Amperage Range: 5 to 320 Amps (DC TIG)
• Amperage Range: 10 to 320 Amps (AC TIG)
• Amperage Range: 10 to 210 Amps (Stick/MMA)
• AC Frequency: 15‐200Hz
• Pulse width: 0.1‐1.0s
• 35% Duty Cycle @ 320A (TIG)
• 60% Duty Cycle @ 240A at (TIG)
• 100% Duty Cycle @ 200A at (TIG)
• 20% Duty Cycle @ 320A (MMA)
• 60% Duty Cycle @ 210A at (MMA)
• 100% Duty Cycle @ 180A at (MMA)
• Input voltage: 415v 3 phase: Input Amperage 20A
• Pulse Frequency AC: 0.5‐10Hz (DC: 0.5‐500Hz)
• Dimensions: 490 x 255 x 480 mm Weight: 27kg
• VRD Voltage Reduction in MMA ‐ reduces OCV in
standby for increased user safety
• Full 4‐way functioning with control of pre/post
flow gas, initial/final amps, slope up/down
• Generator Friendly ‐
Recommended minimum size: 15KVA
• Dual LED displays for pre‐set and actual amps
• MMA Anti‐Stick & Hot Start technology
• Remote Foot Pedal Option
• Package includes: WP26 TIG torch (4m), earth
lead &clamp, gas hose, regulator & Owners Manual
3 Year Warranty
Your local distributor
tech
Specifications maybe subject to change without notice.
R-Tech TIG200DC
FEATURES &
SPECIFICATIONS
Full function digital control panel designed for easy
use ‐ control all setup and machine parameters
from a single button ‐ Easy start and finish set‐up.
• Power Factor Correction ‐ Gives lower running
costs and higher energy efficiency, cleans noisy
power supplies & is 100% generator friendly
• Amperage Range: 5 to 200 Amps (TIG)
The R‐Tech TIG200DC PFC is a 200A DC TIG
welder with 240V input, electronic HF starting,
fully featured pulse welding, slope up/down, twin
LED display, high duty cycle and foot pedal option
• Amperage Range: 10 to 150 Amps (Stick)
• Electronic HF ‐ improved arc starting and less
interference
• 100% Duty Cycle at 125A (TIG)
35% Duty Cycle at 200A (TIG)
• 100% Duty Cycle at 100A (MMA)
35% Duty Cycle at 150A (MMA)
• Pulse width: 0.1‐1.0s
• Input Amperage: 16 Amps
• Input Voltage: 240v
• Pulse Frequency: 0.5‐10Hz
• No‐Load Voltage: 62 Amps
• Dimensions: 400 x 170 x 325 mm Weight: 10kg
• VRD Voltage Reduction in MMA ‐ reduces OCV
in standby for increased user safety
• Full 4‐way functioning with control of pre/post
flow gas, initial/final amps, slope up/down
• Generator Friendly ‐ Recommended minimum
size: 8KVA
• Dual LED displays for preset and actual amps
• MMA Anti‐Stick & Hot Start technology
• Insulation class IP23S
• Package includes: WP26 TIG torch (4m), earth
lead & clamp, gas hose, regulator & owners manual
3 Year Warranty
Your local distributor
tech
For more information visit:
www.r-techwelding.co.uk
Specifications made be subject to change without notice.
R-Tech VP-P100
FEATURES &
SPECIFICATIONS
· 100amp cutting power
· 50% Duty cycle @ 100amps
The R‐Tech VP‐P100 plasma cutter is a heavy duty
plasma cutter with a genuine 31mm clean cut,
high frequency arc starting, pilot arc re‐start and
cost effective & long life consumables
· 100% Duty cycle @ 75amps
· 31mm genuine clean cut on steel
· 40mm severance cut on steel
· 24mm genuine clean cut on alloy &
stainless steel
· 415v input 20A input required
· Generator Friendly ‐ Generator must be
minimum of 15KVA and fitted with AVR
(auto voltage regulation)
· Installed power 12.5KVA
· Insulation class IP23
· Industrial quality metal chassis
· Cooling fan with thermostatic protection
· Quick Fit Torch with long life consumables
· Nett Weight 22kg ‐ Size 570 x 330 x 600
· Air pressure required 70-80Psi/4.6-5.2bar
· Air flow: 200LPM (7CFM)
· Package Includes, R‐Tech VP‐P100
plasma cutter, 6m plasma cutter torch,
earth lead, mains cable, air pressure regulator
& PCL fitting, owners manual
3 Year Warranty
Your local distributor
tech
For more information visit:
www.r-techwelding.co.uk
R-Tech VP-P60
FEATURES &
SPECIFICATIONS
· 60amp cutting power
The R‐Tech VP‐P60 plasma cutter is a heavy duty
plasma cutter with a genuine 21mm clean cut,
high frequency arc starting, pilot arc re‐start and
cost effective & long life consumables
· 60% Duty cycle @ 60amps
· 100% Duty cycle @ 40amps
· 21mm genuine clean cut on steel
· 30mm severance cut on steel
· 16mm genuine clean cut on alloy &
stainless steel
· 415v input 16A input required
· Installed power: 9KVA
· Generator Friendly ‐ Generator must be
minimum of 12KVA and fitted with AVR
(auto voltage regulation)
· Insulation class IP23
· Industrial quality metal chassis
· Cooling fan with thermostatic protection
· Quick Fit Torch with long life consumables
· Nett Weight 18kg ‐ Size 570 x 330 x 600
· Air pressure required 65-75Psi/4.4-5bar
· Air flow: 110LPM (3.9CFM)
· Package Includes, R‐Tech VP‐P60 plasma
cutter, 6m plasma cutter torch, earth lead,
mains cable, air pressure regulator & PCL
fitting, owners manual
3 Year Warranty
Your local distributor
tech
For more information visit:
www.r-techwelding.co.uk
Specifications made be subject to change without notice.
60 AMP
100 AMP
£1795 + VAT
£2190 + VAT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising