lf-7000 lead- free high power soldering and desoldering station

lf-7000 lead- free high power soldering and desoldering station
LF-7000
LEAD- FREE HIGH POWER
SOLDERING AND DESOLDERING STATION
Model
LF-7000
Mains power VAC
As requested
Solder
De-solder
Tweezers
(Optional)
Hot Air Pencil
(Optional)
Part #
210ESD
DIA80T
TWZ100
HAP80
Heater output
32Va.c.
32Va.c.
32Va.c.
Heater power
100W
80W
100W x 2
Iron assembly
Vacuum pump
230Va.c. for 220-240V
32Va.c.
80W
operating voltage
230V.a.c. for 220-240V
mains power
200-450°C
300-450°C
150-430°C
200°C - 450°C
400-900°F
570-850°F
300-800°F
400 - 850°F
* 44-415404
* 44-915412
(D12)
* 46-060102
(TZ02)
Temperature range
Standard tip
•
ENERGY SAVER: Automatically powers down after 15 minutes of idling
(as indicated by the Pause LED) saving power while extending tip life.
Power is restored by picking up the required handpiece.
•
DELAYED SUCTION: Pump will continue sucking for 1-2 seconds after
actuator is released, clears the tubes and prevents clogging of the tip.
•
ANALOG VACUUM GAUGE. Helps to diagnose suction problems with
the desoldering unit.
•
Individual Stands with built-In Tip Cleaner: Individual stands can be
place close to your work while the control unit can be out of the way of
your work. The built-in tip cleaner has been proven to be the most
effective on the market.
•
COMBO UNIT: Integrates the solder and desoldering functions into one,
space saving, top quality system.
•
NICHROME ELEMENT: Solder wand is our ergonomic mini-handle
designed for comfort and ease of use.
•
FRONT CALIBRATION PORTS: Located under the precision
temperature controls for precise calibration.
Hot SMD Tweezers: -TWZ-100
This additional feature is specially designed for SMD chips, SOT, Flat pack
IC's, and surface mount electrolytic capacitors.
Hot Air Pencil HAP 80 provides a fast and efficient method to remove
and/or re-flow small Surface Mount Devices
STANDARD FEATURES:
•
•
•
•
•
•
•
•
•
TEMPERATURE STABILITY:
Tip temperature accurate to within ± 3 °C (6°F)
SPIKE FREE CIRCUITRY:
Zero Voltage switching and fully grounded
design makes this unit safe to electro-sensitive
devices.
ELECTRONIC TEMPERATURE CONTROL:
Adjustable temperature w/o changing tips.
VACUUM SWITCH:
The pump is controlled by a finger actuated,
thyristor switching circuit located on the
desoldering handle.
Soldering and desoldering temperature restore is
controlled by a movement actuated IC in the
handle of each unit.
IRON ASSEMBLIES:
Detachable solder (new ergonomic mini-handle) and desolder wands for ease of
use and repair.
PUMP:
A self-contained vacuum pump engineered to provide continuous, maintenance
free operation.
ISOLATED POWER SUPPLY:
Powered by a high quality 32VAC transformer.
ACCESSORIES:
Optional XYFX1 fume extractor kit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising