enclosed - Cylex UK
Tel: +44 (0)1189-820 911
www.avantipowerrepairs.co.uk
sales@avantipowerrepairs.co.uk
ENCLOSED
Follow us on
Subscribe to our Newsletter
INTRODUCTION
Avanti Power Repairs was founded in 1996, as a company we have steadily expanded to meet the demand
of our customers and will continue to do so with the ever increasing and changing demands of the industry.
We specialize in the manufacture, design and distribution of switch mode, and more recently linear power
supplies. Our range is extensive starting at a low 5 watts and going through to 2000 watts. We also offer
these units in both single and multi outputs, covering a vast range power supplies for every need, the
majority of which have full universal input
Avanti Power Repairs is working to the highest quality standards (ISO9001) in providing advice and
services based solely on your requirements. We pride ourselves on being flexible in dealing with your needs
and will provide you a service that is second to none. With a skilled and dedicated workforce, this
workforce will ensure that all the product information you require is available with the least delay to you as
is possible.
If you do not find a product within our catalogue that meets your requirements please contact our
technical sales team, at one of the addresses or numbers below, who will be more than capable of helping
you find a unit to meet your needs. Our full research and development capability will allow you initial
design concept to be seen through to a fully documented finish project.
“With the Power to help you”
ENCLOSED
An enclosed power supply is typically perceived as the metal cased variety; the benefit of this is to stop
components being exposed & in turn providing an extra measure of safety for service personnel of end user
systems. Encapsulated power supplies are also included under the enclosed power supply banner on our site as
they also protect components and may offer your application the most suitable specifications.
Avanti’s enclosed power supply range offer flexible OEM power solutions from 5W to 10000W in single, dual,
triple and quad outputs; our parallel units have the functionality to take this up to 9000W. Our enclosed power
supplies have varied function, including full range input, active power factor correction, low no load power
consumption, programmable outputs and even medical safety approval to MOOP levels; the majority of which have
short circuit, over load and over voltage protections.
Whether you are looking for a high reliability miniature, PFC, modular, programmable or UPS function; from the
encapsulated APC Series to the large Parallel function RSP's you are sure to find the enclosed power supply you
need from Avanti.
Not what you were looking for? Just give one of our sales team a call.
INDEX
Number of Outputs
Page
Model
Power
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
RS-15 Series
SPS-G015 Series
RS-25 Series
SPS-025 Series
SPS-G025 Series
SNP-C03 Series
RS-35 Series
SPS-035 Series
RD-35 Series
SPS-035-D Series
SPS-035-ID Series
EPS-45-C Series
RS-50 Series
SPS-G050 Series
RD-50 Series
SPS-G050-D Series
SPS-G050-ID Series
RID-50 Series
RT-50 Series
SPS-G050-T Series
RQ-50 Series
AD-55 Series
ADD-55 Series
SPS-M060 Series
SPS-S060 Series
IT-60 Series
IQ-60 Series
SPS-060P Series
SPS-M060-D Series
SPS-060PD Series
SPS-060P-ID Series
SPS-060P-IT Series
SPS-060PT Series
SPS-060P-Q Series
RD-65 Series
RID-65 Series
RT-65 Series
RQ-65 Series
EPS-65-C Series
SPS-070 Series
SPS-070P Series
SPS-075 Series
RS-75 Series
SP-75 Series
HRP-75 Series
SPS-G075 Series
RSP-75 Series
SPS-G075-D Series
SPS-G075-ID Series
SPS-G075-T Series
TP-75 Series
15W
15W Green Mode
25W
25W
25W Green Mode
30W
35W
35W
35W
35W
35W
45W
50W
50W High Reliability
50W
50W
50W Isolated Dual Output
50W Dual Isolated Output
50W
50W
50W
55W
55W
60W Medical
60W
60W
60W
60W~72W
60W Medical
60W PFC
60W Isolated PFC
60W Isolated PFC
60W
60W with PFC Function
65W
65W Isolated
65W
65W
65W
72W NON PFC
72W PFC Function
75W
75W
75W
75W
75W Green Mode
75W PFC Function
75W
75W Isolated
75W
75W PFC Function
●
●
●
●
●
●
●
●
2
3
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
SPS-G075-Q Series
RD-85 Series
RID-85 Series
RQ-85 Series
RT-85 Series
SPU-100 Series
HRP-100 Series
PSC-100C Series
RSP-100 Series
RS-100 Series
SPS-S100 Series
SPS-G100 Series
SP-100 Series
SPS-100P Series
SPS-100PD Series
SPS-G100-D Series
SPU-100-D Series
SPS-G100-ID Series
SPS-100P-ID Series
SPS-100P-IT Series
SPS-100PT Series
TP-100 Series
SPS-100-T Series
SPS-100P-Q Series
SPU-100-Q Series
SPS-G100-Q Series
QP-100 Series
SPS-100-Q Series
MWP-602(A) Series
MWP-606(A) Series
MWP-608 Series
SPS-110 Series
SPS-120P Series
RD-125 Series
RID125 Series
RT-125 Series
RQ-125 Series
HRPG-150 Series
SC-150 Series
HRP-150 Series
RS-150 Series
SPS-S150 Series
SPV-150 Series
SP-150 Series
RSP-150 Series
USP-150 Series
SPU-150-D Series
SPU-150-Q Series
QP-150 B,C Series
QP-150 Series
TP-150 Series
SPS-151P Series
AD-155 Series
ADD-155 Series
PSC-160-C Series
75W
85W
85W Isolated
85W
85W
100W U-Bracket
100W with PFC Function
100W with UPS Battery Charger
100W 1U with PFC Function
100W
100W
100W Green Mode
100W with PFC Function
100W with PFC Function
100W
100W
100W with U-Bracket
100W Isolated
100W
100W Isolated with PFC Function
100W PFC Function
100W with PFC Function
100W
100W
100W with U-Bracket
100W
100W
100W
104W
104W
104W
110W
120W
125W
125W Isolated
125W
125W
150W & 5Vsb
150W Constant Current
150W
150W
150W
150W
150W with PFC Function
150W with 1U
150W U-Bracket with PFC Function
150W
150W
150W with PFC Function
150W with PFC Function
150W with PFC Function
150W
155W
155W
160W UPS Function Battery Charger
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
107
SPS-170P Series
108
HDP-190 Series
109
RSP-200 Series
110
SP-200 Series
111
QP-200 Series
112
HRPG-200 Series
113
HRP-200 Series
114
SPS-220P Series
115
USP-225 Series
116
SPS-230P Series
117
SPU-230-D Series
118
SPU-230-Q Series
119
SP-240 Series
120
SPS-240P Series
121
HDP-240 Series
122
Q-250 Series
123
HSP-250 Series
124
HRP-300 Series
125
HRPG-300 Series
126
SPV-300 Series
127
SP-320 Series
128
RSP-320 Series
129
QP-320 Series
130
USP-350 Series
131
QP-375 Series
132
QP-375-24 Series
133
HRP-450 Series
134
HRPG-450 Series
135, 136, 137
MP450 Series
138
SP-480 Series
139
RSP-500 Series
140
USP-500 Series
141
HRP-600 Series
142
SPV-600 Series
143
HRPG-600 Series
144
HEP-600 Series
145
HLG-600H-A Series
146
HLG-600H-B Series
147
MSP-600 Series
148
PSP-600 Series
149, 150, 151
MP650 Series
152
RSP-750 Series
153
SP-750 Series
154
SPS-750P Series
155, 156, 157
MP1K0 Series
158
RSP-1000 Series
159
SPS-1000P Series
160
161
162
163
164
165
166
SPV-1500 Series
RSP-1500 Series
RSP-2000 Series
RSP-2400 Series
RSP-3000 Series
RST-5000 Series
RST-10000 Series
170W
190W LED with PFC Function
200W
200W with PFC Function
200W with PFC Function
200W & 5Vsb
200W
220W
225W with U-Bracket PFC Function
230W with PFC Function
230W
230W
240W with Active PFC
240W
240W LED with PFC Function
250W
250W
300W High Reliability
300W High Reliability with +5Vsb
300W with PFC Function
320W with PFC Function
320W Low Profile
320W with PFC
350W U-Bracket with PFC Function
375W with PFC Function
375W with PFC Function
450W High Reliability
450W & 5Vsb
450W Modular
480W with PFC Function
500W with PFC Function
500W U Bracket PFC Function
600W
600W with PFC Function
600W & 5Vsb AC-DC
600W Harsh Environment
600W IP65 Rated
600W IP67 Rated Dimmable
600W
600W Parallel Output PFC Function
650W Modular
750W 1U low profile
750W Active PFC Function
750W with PFC Function
1000W Modular
1000W PFC Parallel Function
1000W with PFC Function
1500W
1500W with PFC Function
2000W
2400W Enclosed Parallel
3000W Parallel
5000W with PFC & Parallel Function
10000W with Parallel Function & PFC
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Avanti Power Repairs Ltd
RS-15 Series - 15W Single Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Small scale LED signs
Features
Universal AC input / Full range
Short circuit, over load, over voltage, over temperature
protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-15-3-3
RS-15-5
RS-15-12
RS-15-15
RS-15-24
RS-15-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Specification
Input Voltage
Input Current
Input Frequency
Inrush Current
Leakage Current
Holdup Time
Over Voltage Protection
Humidity
Over Temperature Protection
Storage Temperature, Humidity
MTBF
Current (amps)
3A
3A
1.3A
1A
0.625A
0.313A
Power (watts)
9.9W
15W
15.6W
15W
15W
15W
R&N (mV)
80mV
80mV
120mV
120mV
200mV
200mV
Efficiency (%)
72%
77%
81%
81%
82%
82%
85 ~ 264Vac 120 ~ 370Vdc
0.35A/115Vac 0.25A/230Vac
47 ~ 63Hz
50A/ 230Vac, cold start
<2mA/ 240Vac
70ms/230Vac 15ms/115Vac at full load
Shut off o/p voltage, clamping by zener diode
20 ~ 90% RH non-condensing
Shut down o/p voltage, recovers automatically after temperature goes down
-40°C to +85°C, 10 ~ 95% RH
1608.8Khrs min. MIL-HDBK-217F (25°C)
Description
The new RS-15 Series are 20% smaller than their 20W counterpart and are our most miniature AC/DC enclosed type
switching power supplies that can provide 15W by only free air convection. RS-15 is fully RoHS compliant and all
the electrolytic capacitors in the unit are rated in 105°C. RS-15 can also withstand 300VAC input surge for 5 seconds
and 5G vibration meaning that is suitable for operation in harsh environments. Full output wattage can be provided up
to 50°C and the highest operating temperature is as high as 70°C, with certain de-rating. Other standard functions
include short circuit, overload, over voltage, and over temperature protections.
Page 1
Avanti Power Repairs Ltd
SPS-G015 Series - 15W AC/DC Green Mode Enclosed Power Supply
Applications
Logic control circuit designing
Automatic control systems
Industrial control systems
Test equipment
LED displays
Security devices
Features
Green mode designing, no load < 0.3W
All using 105°C long life electrolytic capacitors
Over load, over voltage, short circuit protection
Small size, high efficiency
Output voltage ±10% adjustment
100% full load burn-in test
-20°C~70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G015-3-3
SPS-G015-05
SPS-G015-12
SPS-G015-15
SPS-G015-24
SPS-G015-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Specification
Input Voltage
Input Current
Input Frequency
Inrush Current
Leakage Current
Holdup Time
Over Voltage Protection
Rise Time
Operating Humidity
Storage Temperature, Humidity
Terminal Pitch
Current (amps)
3A
3A
1.3A
1.0A
0.63A
0.32A
Power (watts)
10W
15W
15.6W
15W
15.1W
15.4W
R&N (mV)
80mV
80mV
120mV
120mV
200mV
200mV
Efficiency (%)
72%
77%
81%
81%
82%
82%
88V ~ 264Vac universal full range or 125V ~375Vdc
<0.5A@100Vac input, full load condition
47 ~ 63Hz
<30A@115V , <50A@230Vac input, Cold start at 25°C ambient
<0.5mA@264Vac input
>60mS@230V, full load condition
Over voltage latch
<50mS
20% ~ 85% (non condensing)
-40°C ~ +85°C, 10% ~ 95% (non condensing)
5P / 7.62mm with plastic cover
Description
SPS-G015 is a single output AC/DC enclosed power supply with green mode function for low power consumption.
With wide range operation temperatures of -20°C to +70°C (please refer to spec details), ±10% output voltage
adjustment and <0.3W no load power consumption, as well as short circuit, over voltage and over load protections.
Page 2
Avanti Power Repairs Ltd
RS-25 Series - 25W Single Output AC-DC Enclosed Power Supply
Features
Universal AC input / Full range
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-25-3-3
RS-25-5
RS-25-12
RS-25-15
RS-25-24
RS-25-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Current (amps)
6A
5A
2.1A
1.7A
1.1A
0.57A
Power (watts)
19.8W
25W
25.2W
25.5W
26.4W
27.36W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Specification
Input Voltage
Frequency Range
Input Current
Inrush Current (max.)
Leakage Current
Working Humidity
Hold Time
Working Temperature
Set up, Rise Time
Over Voltage Protection
88 ~ 264Vac 125 ~ 373Vdc
(Withstand 300Vac surge for 5sec. Without damage)
47 ~ 63Hz
0.7A/115Vac 0.4A/230Vac
30A at 230Vac, cold start
<2mA at 240Vac
20 ~ 90% RH non-condensing
80ms at 230Vac 14ms at 115Vac, full load
-20°C to +70°C (Refer to output load de-rating curve)
1200ms, 23ms at 230VAC 2200ms, 30ms at 115Vac, full load
Hiccup mode, recovers automatically after fault condition is removed
Page 3
Efficiency (%)
72%
77%
79%
82%
84%
85%
Avanti Power Repairs Ltd
SPS-025 Series - 25W Single Output Switching Power Supply
Features
Universal input
Built-in EMI filter
Low ripple noise
No min. load requirement
Output voltage ±10% adjustment
100% 50°C burn-in test
Green mode design - meets IEA standard <0.75W (standby
state)
Over voltage, over load & short circuit protections
Model No
SPS-025-3-3
SPS-025-05
SPS-025-7-5
SPS-025-12
SPS-025-15
SPS-025-24
SPS-025-30
SPS-025-48
Voltage (max)
3.3V
5.0V
7.5V
12V
15V
24V
30V
48V
Specification
Input Voltage
Input Current
Input Frequency
Inrush Current
Leakage Current
Over Load Protection
Short Circuit Protection
Rise Time
Hold Up Time
Operating Humidity
Storage Temperature, Humidity
Operating Temperature
Current (amps)
6.0A
5.0A
3.4A
2.1A
1.7A
1.1A
0.9A
0.57A
Power (watts)
20W
25W
25W
25W
25W
27W
27W
27W
R&N (mV)
50mV
50mV
50mV
100mV
100mV
100mV
100mV
100mV
Efficiency (%)
71%
75%
79%
82%
82%
85%
85%
85%
85 to 264Vac 120 to 375Vdc
0.8A max. at 100Vac input, full load
47 to 63Hz
30A max. at 115Vac input, full load, 50A max at 230Vac input, full load
1.0mA max. at 264Vac input
Over 105% ~ 200% of rating, recovers removed
automatically after fault condition has been
Auto recovers once fault condition removed
20mS max
40mS min. at 230Vac
20% ~ 85% (non condensing)
-25°C ~ 75°C, 10% ~ 95% (non condensing)
-25°C ~ 70°C ; De-rating: -25°C ~ -10°C : 2.5%/°C / 50°C ~ 70°C 2.5%/°C
Page 4
Avanti Power Repairs Ltd
SPS-G025 Series - 25W AC/DC Green Mode Enclosed Power Supply
Applications
Logic control circuit designing
Automatic control systems
Industrial control systems
Test equipment
LED displays
Security devices
Features
Green mode designing, no load < 0.3W
High efficiency and high reliability
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
100% full load burn-in test
-20°C~70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G025-3-3
SPS-G025-05
SPS-G025-7-5
SPS-G025-12
SPS-G025-15
SPS-G025-24
SPS-G025-30
SPS-G025-48
Specification
Input Voltage
Inrush Current
Input current
Input Frequency
Hold Up Time
Leakage Current
Rise Time
Set Up Time
Over Voltage Protection
Over Load &
Short Circuit Protection
Green Mode Function
Cooling
Terminal Pitch
Voltage (max)
3.3V
5V
7.5V
12V
15V
24V
30V
48V
Current (amps)
6A
5A
3.4A
2.1A
1.7A
1.1A
0.9A
0.57A
Power (watts)
20W
25W
25W
25W
25W
27W
27W
27W
R&N (mV)
50mV
70mV
70mV
120mV
150mV
150mV
200mV
200mV
Efficiency (%)
72%
77%
78%
81%
82%
84%
85%
85%
88V ~ 264Vac universal full range or 125V ~ 375Vdc
<30A@115V , <50A@230Vac input, Cold start at 25°C ambient
<0.65A@100Vac input, full load condition
47~440Hz
>60mS@230V, full load condition
<1.5mA@264Vac input
<30mS
<1 Sec@100 ~ 240Vac
Over voltage latch
Over 105%~ 180% rate load or short circuit activated
Hiccup mode with auto recovery once fault condition removed
No load power consumption <0.3W at 240Vac input
Natural cooling
5P / 7.62mm with plastic cover
Description
SPS-G025 is a single output AC/DC enclosed power supply with green mode function for low power consumption.
With wide range operation temperatures of -20°C to +70°C (please refer to spec details), ±10% output voltage
adjustment and <0.3W no load power consumption, as well as short circuit, over voltage and over load protections.
For DIN Rail applications there is also a new DIN bracket 60-475-212R.
Page 5
Avanti Power Repairs Ltd
SNP-C03 Series - 30W AC/DC Single Output Enclosed Power Supply
Features
With ITE safety
Only 1.142 inch height
With power on LED
With output adjustable trimmer
Efficiency between 75% to 85%
Operation from -20°C to 70°C by convection
Model No
SNP-C03B
SNP-C036
SNP-C037
SNP-C038
SNP-C039
SNP-C03T
Specification
Input Voltage
Inrush Current
Input Frequency
Hold Up Time
Over Load Protection
Short Circuit Protection
Over Voltage Protection
Cooling
Storage Temperature
EMI
EMS
Safety
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Current (amps)
6A
6A
2.5A
2A
1.3A
0.63A
Power (watts)
30W
30W
30W
30W
30W
30W
R&N (mV)
50mV
50mV
120mV
150mV
240mV
240mV
85Vac to 264Vac
less than 30A at 115Vac less than 60A at 230Vac, cold start, 25°C
47Hz to 63Hz
16mS typical at rated load and 115Vac
Auto recovery
Auto recovery
Latch off
Free air convection
-40°C to +75°C
FCC B; EN55022 B; EN55011 B
EN61000-4-2,-3,-4,-5,-6,-8,-11
UL 60950-1CSA C22.2 No. 60950-1EN 60950-1
Page 6
Efficiency (%)
75%
82%
83%
84%
84%
85%
Avanti Power Repairs Ltd
RS-35 Series - 35W Single Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Small scale LED signs
Features
Universal AC input / Full range
Short circuit/Over load/Over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-35-3-3
RS-35-5
RS-35-12
RS-35-15
RS-35-24
RS-35-48
Specification
Voltage Range
Frequency
Input Current
Inrush Current
Leakage Current
Setup, Rise Time
Hold Up Time
Over Load Protection
Over Voltage Protection
Working Temperature
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Current (amps)
7A
7A
3A
2.4A
1.5A
0.8A
Power (watts)
23.1W
35W
36W
36W
36W
38.4W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Efficiency (%)
73%
77%
81%
83%
84%
84%
88 ~ 264Vac 125 ~ 373Vdc (Withstand 300Vac surge for 5sec. Without damage)
47 ~ 63Hz
0.8A/115Vac 0.55A/230Vac
36A at 230Vac max., cold start
<2mA at 240Vac
500ms, 30ms/230Vac 1200ms, 30ms/115Vac at full load
80mS/230Vac 15mS/115Vac at full load
110 ~ 150% rated output power
Hiccup mode, recovers automatically after fault condition removed
Hiccup mode, recovers automatically after fault condition is removed
-25°C to +70°C (Refer to output load de-rating curve)
Description
The new RS-15 Series are 20% smaller than their 20w counterpart and are our most miniature AC/DC enclosed type
switching power supplies that can provide 15W by only free air convection. RS-35 is fully RoHS compliant and all
the electrolytic capacitors in the unit are rated in 105°C. RS-35 can also withstand 300VAC input surge for 5 seconds
and 5G vibration meaning that is suitable for operation in harsh environments. Full output wattage can be provided up
to 50°C and the highest operating temperature is as high as 70°C, with certain de-rating. Other standard functions
include short circuit, overload, over voltage, and over temperature protections.
Page 7
Avanti Power Repairs Ltd
SPS-035 Series - 35W Single Output Switching Power Supply
Features
Universal input
Built-in EMI filter
Low ripple noise
No min. load requirement
Output voltage ±10% adjustment
100% 50°C burn-in test
Over voltage, short circuit shut down & auto recovery
Model No
SPS-035-3.3
SPS-035-05
SPS-035-7.5
SPS-035-12
SPS-035-15
SPS-035-15M
SPS-035-24
SPS-035-24Q
SPS-035-48
Specification
Input Voltage
Inrush Current
Leakage Current
Current
Input Frequency
Over Load Protection
Short circuit protection
Cooling
Operating temperature
Safety Approvals
Packing
Voltage (max)
3.3V
5.0V
7.5V
12V
15V
18V
24V
28V
48V
Current (amps)
9.0A
7.0A
4.7A
3.0A
2.4A
2.0A
1.5A
1.25A
0.75A
Power (watts)
35W
35W
35W
35W
35W
35W
35W
35W
35W
R&N (mV)
50mV
50mV
70mV
100mV
100mV
150mV
150mV
200mV
250mV
Efficiency (%)
68%
70%
74%
76%
76%
77%
78%
78%
80%
85 to 264Vac 120 to 375Vdc
30A max. At 115Vac input, full load 50A max.
at 230Vac input, full load
1.0mA max. at 264Vac input
1.0A max. at 100Vac input, full load
47 to 63Hz
105% to 180% of rated load, auto recovery
auto recovery
Natural Cooling
0°C to 70°C
Meets UL 1950, CSA22.2, TUV EN 60950, IEC 60950, EMKO-TSE
N.W. 0.35kg
Page 8
Avanti Power Repairs Ltd
RD-35 Series - 35W Dual Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RD-35A
RD-35B
RD-3513
Voltage (max)
5V
12V
5V
24V
14V
-14V
Current (amps)
4A
1A
2.2A
1A
1.3A
1.3A
Power (watts)
32W
35W
35.1W
R&N (mV)
80mV
120mV
80mV
120mV
120mV
120mV
Efficiency (%)
79%
82%
80%
Description
A highly efficient and reliable enclosed power supply, with a high operating temperature of -25~+70°C and cooling
by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations. Overload, short
circuit and over voltage protection with hiccup mode (recovering automatically after fault condition is removed).
Page 9
Avanti Power Repairs Ltd
SPS-035-D Series - 35W Dual Output AC-DC Enclosed Power Supply
Features
Power ON with LED indicator
Built in EMI filter, low ripple noise
Over load, over voltage short circuit protection
100% 50° burn-in test
UL, cUL, CB, CE approved
Model No
SPS-035-D1
SPS-035-D2
SPS-035-D3
SPS-035-D4
Specification
Input Voltage
Frequency
Input Current
Inrush Current
Leakage Current
Over Load Protection
Short Circuit Protection
Rise time
Setup Time
Hold Up Time
Cooling
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Safety Standards
EMC
M.T.B.F.
Voltage (max)
+5V
+12V
+5V
+24V
+12V
-12V
+15V
-15V
Current (amps)
4.0A
1.5A
4.0A
1.3A
1.5A
1.5A
1.3A
1.3A
Power (watts)
35W
35W
35W
35W
R&N (mV)
50mV
120mV
50mV
240mV
120mV
120mV
150mV
200mV
Efficiency (%)
75%
75%
76%
76%
85~264 Vac or 120~375Vdc, universal full range
47 ~ 63 Hz
<1.0A @100Vac, full load condition
<30A@115V / <50A@230Vac input, full load condition.
Cold start at 25°C ambient
<1.0mA@240Vac input
Over 105% ~ 180% of rating, recovers automatically after fault condition has been
removed.
Shutdown, recovers automatically after fault condition has been removed.
<20mS
<2.0Sec @115V, <0.8Sec @230V
>40mS@230V
Natural Cooling
-10~70°C; De-rating: 45°C~70°C : 2.5%/°C
-10~+75°C
20% ~ 85% (non condensing)
10% ~ 95% (non condensing)
UL 60950-1st, CSA C22.2 No.60950-1-03 1st approved.TUV EN 60950-1st, IEC
60950-1st, EMKO-TSE (74-SEC)207/94 standard
EN 55022 CLASS B, EN 61000-3-2, 3, FCC CFR 47 PART 15 CLASS B, CNS
13438 CLASS B. EN 55024: EN 61000-4-2, 3,4,5,6,8,11.
472K hours
Page 10
Avanti Power Repairs Ltd
SPS-035-ID Series - 35W Dual Output Enclosed Power Supply
Applications
Industrial applications where isolated dual outputs are required
Features
V1 & V2 output and isolated, V2 polarity can be positive or
negative
Power On with LED indicator
Built in EMI filter, low ripple & noise
Over voltage protection: Shutdown and latch off
Overload and short circuit protection: Hiccup mode
100% full load burn in test
-20~+70°C operating temperature
Model No
SPS-035-ID1
Voltage (max)
5V
SPS-035-ID2
5V
SPS-035-ID8
12V
SPS-035-ID9
15V
Current (amps)
4A
2.5A
4A
1.3A
3A
1.5A
2.4A
1.5A
Power (watts)
35W
35W
35W
35W
36W
36W
36W
36W
R&N (mV)
70mV
120mV
70mV
200mV
120mV
120mV
150mV
150mV
Efficiency (%)
79%
79%
79%
79%
82%
82%
83%
83%
Description
The SPS-035 series is a highly efficient 35W dual output enclosed power supply with isolated outputs. The power
supply can operate between -20~+70°C with cooling by free air convection and has protections such as over voltage,
overload and short circuit.
Page 11
Avanti Power Repairs Ltd
EPS-45-C Series - 45W Single Output Enclosed Switching Power Supply
Applications
Factory automation
Electrical or mechanical equipment
Features
Universal AC input/Full range
Optional L-bracket and cover
High efficiency up to 90%
Protections: Short circuit, overload and over voltage
Cooling by free air convection
2" x 4" compact size
LED indicator for power on
No load power consumption <0.3W
Model No
EPS-45-3-3-C
EPS-45-5-C
EPS-45-7-5-C
EPS-45-12-C
EPS-45-15-C
EPS-45-24-C
EPS-45-36-C
EPS-45-48-C
Voltage (max)
3.3V
5V
7.5V
12V
15V
24V
36V
48V
Current (amps)
8A
8A
5.4A
3.75A
3A
1.9A
1.25A
1A
Power (watts)
26.4W
40W
40.5W
45W
45W
45.6W
45W
48W
R&N (mV)
80mV
80mV
100mV
120mV
150mV
240mV
280mV
300mV
Efficiency (%)
80%
82%
84%
87%
88%
89%
89%
90%
Description
The EPS-45-C series is a 45W single output high efficiency AC/DC green enclosed switching power supply.
Possessing up to 90% of high efficiency the unit can be cooled from -30~+70°C ambient temperature which is
required for operating in a closed loop system.
Page 12
Avanti Power Repairs Ltd
RS-50 Series - 50W Single Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Small scale LED signs
Features
Universal AC input / Full range
Short circuit/Over load/Over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-50-3-3
RS-50-5
RS-50-12
RS-50-15
RS-50-24
RS-50-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Specification
Input Voltage
Input Current
Inrush Current
Leakage Current
Input Frequency
Hold Time
Storage Temperature, Humidity
Set Up, Rise Time
Safety Standards
Withstand Voltage
Current (amps)
10A
10A
4.2A
3.4A
2.2A
1.1A
Power (watts)
33W
50W
50.4W
51W
52.8W
52.8W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Efficiency (%)
72%
78%
81%
83%
84%
86%
88 ~ 264Vac 125 ~ 373Vdc
(Withstand 300VAC surge for 5sec. without damage)
1.3A at 115Vac 0.8A at 230Vac
33A/230Vac, cold start
<2mA at 240Vac
47 ~ 63Hz
60ms/230Vac 14ms/115Vac at full load
-40°C ~ +85°C, 10 ~ 95% RH
500ms, 20ms/230Vac 1200ms, 30ms/115Vac at full load
UL60950-1, TUV EN60950-1 Approved
I/P-O/P:3KVac I/P-FG:1.5KVac O/P-FG:0.5KVac
Description
The new RS-50 Series are 20% smaller than their 50W counterpart and are our most miniature AC/DC enclosed type
switching power supplies that can provide 15W by only free air convection. RS-50 is fully RoHS compliant and all
the electrolytic capacitors in the unit are rated in 105°C. RS-50 can also withstand 300VAC input surge for 5 seconds
and 5G vibration meaning that is suitable for operation in harsh environments. Full output wattage can be provided up
to 50°C and the highest operating temperature is as high as 70°C, with certain de-rating. Other standard functions
include short circuit, overload, over voltage, and over temperature protections.
Page 13
Avanti Power Repairs Ltd
SPS-G050 Series - 50W AC-DC High Reliability Enclosed Power Supply
Applications
Logic control circuit designing
Automatic control systems
Industrial control systems
Test equipment
printers
POS systems
Display systems
Franking machines
Gambling machines
Features
Green-mode design
No load <0.5W
High efficiency and high reliability
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
100% full load burn-in test
-20°C~70°C Operating temperature
UL, cUL, TUV, CB, CE standard
Model No
SPS-G050-T1
SPS-G050-T2
SPS-G050-T3
Specification
Input Voltage
Input Current
Input Frequency
Inrush Current
Leakage Current
Rise Time
Hold Up Time
Set Up Time
Voltage (max)
5V
12V
-12V
5V
12V
-5V
5V
12V
24V
Current (amps)
0.5A
0.2A
0A
0.5A
0.2A
0A
0.5A
0.2A
0.1A
Power (watts)
50W
50W
51W
R&N (mV)
70mV
120mV
150mV
70mV
120mV
120mV
70mV
120mV
200mV
Efficiency (%)
75%
75%
78%
88V ~ 264Vac or 125V ~ 375Vdc Universal full range
(Withstand 300VAC surge for 5sec. without damage)
<1.3A@100V ac input, full load condition
47 ~ 63Hz
<30A@115V , <50A@230V ac input,
Cold start at 25°C ambient
<1.5mA@264V ac input
<30mS
>60mS@230V, full load condition
<1 Sec@100 ~ 240V ac
Description
TUV & CB certification available Feb 09 UL certification available March 09 UL 60950-1, 2nd Edition TUV
EN60950-1 : 2006 IEC 60950-1 : 2005
Page 14
Avanti Power Repairs Ltd
RD-50 Series - 50W Dual Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RD-50A
RD-50B
Voltage (max)
5V
12V
5V
24V
Current (amps)
6A
2A
4A
1.4A
Power (watts)
54W
54W
R&N (mV)
80mV
120mV
80mV
150mV
Efficiency (%)
79%
80%
Description
A highly efficient and reliable enclosed power supply, with a high operating temperature of -25~+70°C and cooling
by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations. Overload, short
circuit and over voltage protection with hiccup mode (recovering automatically after fault condition is removed).
Page 15
Avanti Power Repairs Ltd
SPS-G050-D Series - 50W Dual Output AC-DC Enclosed Power Supply
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Full range AC input
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G050-D1
SPS-G050-D2
Voltage (max)
5V
12V
5V
24V
Current (amps)
6A
3A
6A
2A
Power (watts)
51W
52W
R&N (mV)
70mV
120mV
70mV
200mV
Efficiency (%)
79%
80%
Description
SPS-G050D Series are dual output power supplies with IC function, creating operating temperatures as low as 20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide use, and
the output voltage is adjustable by 10%.
Isolated output version, SPS-G050ID Series, is also available.
Page 16
Avanti Power Repairs Ltd
SPS-G050-ID Series - 50W Isolated Dual Output AC-DC Enclosed PSU
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Full range AC input
Isolated outputs
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G050-ID1
SPS-G050-ID2
Voltage (max)
5V
12V
5V
24V
Current (amps)
6A
3A
6A
2A
Power (watts)
51W
52W
R&N (mV)
70mV
120mV
70mV
200mV
Efficiency (%)
79%
80%
Description
SPS-G050ID Series are isolated dual output power supplies with IC function, creating operating temperatures as low
as -20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide use,
and the output voltage is adjustable by 10%.
Page 17
Avanti Power Repairs Ltd
RID-50 Series - 50W Dual Isolated Output AC-DC Enclosed PSU
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Isolated output & ground
Universal AC input
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
Using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
UL, cUL, TUV, CE & CB approvals
Model No
RID-50A
RID-50B
Voltage (max)
5V
12V
5V
24V
Current (amps)
6A
2A
4A
1.4A
Power (watts)
54W
54W
R&N (mV)
80mV
120mV
80mV
150mV
Efficiency (%)
80%
81%
Description
A highly efficient and reliable dual output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Isolated output and ground for both channels. Built to withstand 300VAC surge
input for 5 seconds and 5G vibrations. Overload, short circuit and over voltage protection with hiccup mode
(recovering automatically after fault condition is removed).
Page 18
Avanti Power Repairs Ltd
RT-50 Series - 50W Triple Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RT-50A
RT-50B
RT-50C
RT-50D
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
Current (amps)
4A
2A
0.5A
4A
2A
0.5A
4A
2A
0.5A
3A
1A
1A
Power (watts)
46.5W
50W
50W
51W
R&N (mV)
80mV
120mV
100mV
80mV
120mV
120mV
80mV
120mV
120mV
80mV
150mV
120mV
Efficiency (%)
77%
77%
78%
80%
Description
A highly efficient and reliable triple output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 19
Avanti Power Repairs Ltd
SPS-G050-T Series - 50W Triple Output AC-DC Enclosed Power Supply
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Full range AC input
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G050-T1
SPS-G050-T2
SPS-G050-T3
Specification
Input Voltage
Input Current
Input Frequency
Inrush Current
Voltage (max)
5V
12V
-12V
5V
12V
-5V
5V
12V
24V
Current (amps)
6A
2.5A
1A
6A
2.5A
1A
6A
2.5A
2A
Power (watts)
50W
50W
51W
R&N (mV)
70mV
120mV
150mV
70mV
120mV
120mV
70mV
120mV
200mV
88V ~ 264Vac or 125V ~ 375Vdc Universal full range
(Withstand 300VAC surge for 5sec. without damage)
<1.3A@100V ac input, full load condition
47 ~ 63Hz
<30A@115V , <50A@230V ac input,
Cold start at 25°C ambient
<1.5mA@264V ac input
<30mS
>60mS@230V, full load condition
<1 Sec@100 ~ 240V ac
Efficiency (%)
75%
75%
78%
Leakage Current
Rise Time
Hold Up Time
Set Up Time
Description
SPS-G050T Series are triple output power supplies with IC function, creating operating temperatures as low as 20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide use, and
the output voltage is adjustable by 10%.
Page 20
Avanti Power Repairs Ltd
RQ-50 Series - 50W Quad Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RQ-50B
RQ-50C
RQ-50D
Voltage (max)
5V
12V
-5V
-12V
5V
15V
-5V
-15V
5V
12V
24V
-12V
Current (amps)
5A
1A
0.5A
0.5A
5A
1A
0.5A
0.5A
3A
1A
1A
0.5A
Power (watts)
46W
46W
46W
46W
50W
50W
50W
50W
53.4W
53.4W
53.4W
53.4W
R&N (mV)
80mV
120mV
100mV
80mV
80mV
120mV
100mV
80mV
80mV
120mV
180mV
80mV
Efficiency (%)
74%
75%
79%
Description
A highly efficient and reliable quad output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 21
Avanti Power Repairs Ltd
AD-55 Series - 55W Single Output PSU With Battery Charger
Applications
Control panels
UPS battery back-up
Features
Universal AC input range
High Efficiency
Low working temperature
Soft start circuit
Limiting AC surge current
Short circuit, overload & over voltage protected
Battery low protections
100% full load burn in test
Built in EMI filter
Fixed Switching frequency at 45KHz
UL60950-1, TUV EN60950-1 Approved
Model No
AD-55A
AD-55B
Voltage (max)
14V
13.4V
28V
26.5V
Current (amps)
4A
0.23A
2A
0.16A
Power (watts)
51.38W
R&N (mV)
100mV
Efficiency (%)
71%
54W
100mV
74%
Description
AD-55 Series is a 55W single output AC/DC power supply with battery charger (UPS) Function that meets UL,
TUV, CB & CE requirements. AD-55 Series also has standard features such as short circuit, over load and over load
protections as well as optional battery low protections and alarm signals. Suitable applications include control panels,
back-up systems.
Page 22
Avanti Power Repairs Ltd
ADD-55 Series - 55W Dual Output Power Supply With Battery Charger
Features
Universal full range AC input
Short circuit, over load & over voltage protections
Battery low protection
Cooling by free air convection
100% full load burn-in test
Optional DC Alarm Signals
Fixed switching frequency at 45KHz
Model No
ADD-55A
ADD-55B
Voltage (max)
14V
5V
13.4V
28V
5V
26.5V
Current (amps)
2.5A
3A
0.23A
1.3A
3A
0.16A
Page 23
Power (watts)
53W
R&N (mV)
100mV
100mV
Efficiency (%)
71%
55.12W
150mV
150mV
74%
Avanti Power Repairs Ltd
SPS-M060 Series - AC-DC Single Output Enclosed Medical Power Supply
Features
Green-mode designing, meet IEA standard<0.75W (standby
state)
Power ON with LED indicator
Over load, over voltage and short circuit protection
Output voltage ±10% adjustment
Non min. load requirement
Meet UL, 2601-1 medical standard
Model No
SPS-M060-05
SPS-M060-12
SPS-M060-15
SPS-M060-24
SPS-M060-30
SPS-M060-48
Voltage (max)
5V
12V
15V
24V
30V
48V
Current (amps)
10A
5A
4A
2.5A
2A
1.3A
Power (watts)
50W
60W
60W
60W
60W
60W
R&N (mV)
50mV
120mV
150mV
240mV
300mV
300mV
Efficiency (%)
74%
77%
77%
80%
80%
80%
Description
This 60 Watt Medical Application Unit meets the UL 2601-4 medical standard and is currently going through
approvals for cUL/UL, CB and CE. For more details please click through to the specification or complete an enquiry
form for a member of our sales team to contact you.
Page 24
Avanti Power Repairs Ltd
SPS-S060 Series - 60W Single Output AC-DC S Series Enclosed PSU
Applications
19” Rack-Mount (Industrial computer system)
Industrial control systems
Features
Light weight, compact size
Green-mode designing, meet IEA standard<0.75W (standby
state)
Over load, over voltage & short circuit protection
Output voltage ±10% adjustment
Built-in EMI filter, low ripple noise
100% 50° burn-in test
UL, cUL, CB, CE certified; meets TUV standard (48V CE
only)
Model No
SPS-S060-05
SPS-S060-7-5
SPS-S060-12
SPS-S060-15
SPS-S060-24
SPS-S060-48
Specification
Input Voltage
AC Frequency
Input Current
Inrush Current
Leakage Current
Rise time
Hold up time
Setup time
Over Load Protection
Short Circuit
Cooling
Temperature
Voltage (max)
5V
8V
12V
15V
24V
48V
Current (amps)
10A
7A
7A
4A
2.5A
1.25A
Power (watts)
50W
50W
60W
60W
60W
60W
R&N (mV)
50mV
75mV
120mV
150mV
240mV
480mV
Efficiency (%)
74%
75%
77%
78%
80%
80%
Universal input 85~264 VAC or 120~375VDC
47 ----- 63 Hz
<1.8A@100V AC input, full load condition
<30A@115V / <60A@230V AC input.
Cold start at 25°C ambient
<1.5mA@264V AC input
<20mS
>16.7mS@115V, >60mS@230V
Typically:800mS@115V, 300mS@230V, AC INPUT
Shutdown when load over 105% ~ 180% of rating, recovers automatically after
fault condition has been
Shutdown, recovers automatically after fault condition has been removed
Natural Cooling
Operating: -25~70°C; De-rating: -10°C ~ -25°C: 3.0%/°C / 45°C ~ 70°C: 3
Page 25
Avanti Power Repairs Ltd
IT-60 Series - 60W Triple Isolated Output Switching Power Supply
Applications
General electronic machinery
Features
Isolated output &GND for Ch1,2,3
Universal AC input / Full range
Protections: Short circuit / Over load/ Over voltage
LED indicators for power On
100% full load burn-in test
Fixed switching frequency at 67KHz
Model No
IT-60D
IT-60F
Voltage (max)
5V
12V
24V
5V
15V
24V
Current (amps)
3A
1A
1.4A
3A
1A
1.3A
Power (watts)
58.2W
58.2W
R&N (mV)
80mV
120mV
240mV
80mV
150mV
240mV
Efficiency (%)
76%
76%
Description
The IT-60 series is a highly efficient and reliable power supply with isolated triple output and universal AC input.
Protections including short circuit, overload and over voltage; Fixed switching frequency at 67KHz.
Page 26
Avanti Power Repairs Ltd
IQ-60 Series - 60W Isolated Quad Output Switching Power Supply
Applications
General electronic equipment
Features
Isolated output & GND for CH1, CH2 & CH3, CH4
Universal AC input/full range
Protections: Short circuit/Overload/Over voltage
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 67KHz
Model No
IQ-60D
IQ-60F
Voltage (max)
5V
12V
-12V
24V
5V
15V
-15V
24V
Current (amps)
3A
0.5A
0.5A
1.3A
3A
0.5A
0.5A
1.25A
Power (watts)
60W
60W
R&N (mV)
80mV
120mV
120mV
240mV
80mV
150mV
150mV
240mV
Efficiency (%)
76%
76%
Description
The IQ-60 Series is an isolated quad output switching power supply with universal AC input. Protections including
short circuit, overload and over voltage, including an LED indicator for power on. Fixed switching frequency at
67KHz.
Page 27
Avanti Power Repairs Ltd
SPS-060P Series - 60W~72W Single Output Switching Power Supply
Features
Universal input
PFC function
Built-in EMI filter
Low ripple noise
No min. load requirement
Output voltage ±10% adjustment
100% 50°C burn-in test
Over voltage, over load protection
Model No
SPS-070P-48
SPS-060P-3.3
SPS-060P-05
SPS-070P-12
SPS-070P-15
SPS-070P-15M
SPS-070P-24
SPS-070P-24Q
Specification
Input Voltage
Input Frequency
Input Current
Inrush Current
Leakage current
Over load protection
Short circuit protection
Rise Time
Cooling
Operating temperature
Hold up time
Set up time
Voltage (max)
48V
3.3V
5.0V
12V
15V
18V
24V
28V
Current (amps)
1.5A
15.0A
12.0A
6.0A
4.8A
4.0A
3.0A
2.6A
Power (watts)
72W
49.5W
60W
72W
72W
72W
72W
72.8W
R&N (mV)
300mV
50mV
50mV
120mV
150mV
180mV
240mV
280mV
85 to 264Vac 120 to 375Vdc
47 to 63Hz
1.8A max. at 100Vac input, full load
30A max. at 115Vac input, full load 60A max.
at 230Vac input, full load
1.5mA max. at 264Vac input
105% to 180% of rated load, auto recovery
auto recovery
20mS max
Natural Cooling
0°C to 70°C
16.7mS min. at 115Vac input 80mS min. at 230Vac input
800mS typ. at 115Vac input 300mS typ. at 230Vac input
Page 28
Efficiency (%)
80%
67%
72%
75%
76%
77%
78%
79%
Avanti Power Repairs Ltd
SPS-M060-D Series - 60W Dual Output AC-DC For Medical Enclosed Power S
Features
Power ON with LED indicator
Over load, over voltage and short circuit protection
Built in EMI filter, low ripple noise
Built-in long life ball bearing fan
Meet UL, 2601-1 medical standard
Model No
SPS-M060-D1
SPS-M060-D2
SPS-M060-D3
SPS-M060-D4
Voltage (max)
5V
12V
5V
24V
12V
-12V
15V
-15V
Current (amps)
10A
3A
6A
2.5A
5A
2.5A
4A
2A
Page 29
Power (watts)
60W
60W
60W
60W
R&N (mV)
50mV
120mV
120mV
120mV
120mV
120mV
150mV
150mV
Efficiency (%)
75%
86%
77%
77%
Avanti Power Repairs Ltd
SPS-060PD Series - 60W Dual Output PFC AC-DC Enclosed Power Supply
Features
Power ON with LED indicator
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protections
100% 50° burn-in test
Power Factor Correction function
UL, cUL, TUV, CB, CE approved
Model No
SPS-060PD1
SPS-060PD2
SPS-060PD3
SPS-060PD4
Specification
Input Voltage
Frequency
Input Current
Inrush Current
PFC
Leakage Current
Rise Time
Hold Up Time
Setup Time
Operating Temperature
Operating Humidity
M.T.B.F.
Voltage (max)
5V
12V
5V
24V
12V
-12V
15V
-15V
Current (amps)
8A
4A
6A
2.2A
3.43A
3.43A
3A
3A
Power (watts)
60W
60W
60W
60W
88V 85 ~ 264Vac 120 ~ 375Vdc
47 ~ 63Hz
<1.8A/100Vac input, cold start
<30A/115V <60A/230Vac input, cold start
Meets IEC 1000-3-2 Class A standard
<1.5mA/264Vac input
<20mS
>16.7mS/115V, >80mS/230V
<3Sec/115V/60Hz; <1Sec/230V/50Hz
-10°C ~ 70°C; De-rating: 42°C ~ 70°C : 2.0%/°C
20% ~ 85% (non condensing)
260K hours
Page 30
R&N (mV)
50mV
120mV
50mV
240mV
120mV
120mV
150mV
150mV
Efficiency (%)
75%
75%
75%
75%
Avanti Power Repairs Ltd
SPS-060P-ID Series - 60W Dual Isolated Output AC/DC PFC Enclosed Switch Mode Power Supply
Applications
Programmable logic controllers
Automatic controls
Industrial controls
Test equipment
Motor-Base machinery
Features
Isolated outputs
High Reliability and Efficiency
Power on LED indicator
Built-in EMI filter
Low ripple noise
Over voltage, over load, short circuit protection
First output voltage adjustable ±10% on ID5 & ID6
100% full load burn in test
-20°C to 70°C operating temperature
UL, cUL, TUV, CB & CE approved
Model No
SPS-060P-ID1
SPS-060P-ID2
SPS-060P-ID5
SPS-060P-ID6
Voltage (max)
5V
12V
5V
24V
12V
5V
24V
5V
Current (amps)
8A
4A
6A
2.2A
5A
3A
2.5A
3A
Power (watts)
60W
60W
60W
60W
R&N (mV)
70mV
120mV
70mV
240mV
120mV
70mV
240mV
70mV
Efficiency (%)
76%
77%
77%
78%
Description
SPS-060P-ID is a dual isolated output enclosed switch mode power supply range with PFC function. These high
reliability enclosed power supplies have universal full range input voltage and wide range operating temperatures of 20°C to 70°C. The primary output voltage of the ID5 & ID6 models is also adjustable by ±10%
Page 31
Avanti Power Repairs Ltd
SPS-060P-IT Series - 60W Triple Isolated Output AC/DC PFC Enclosed Switch Mode Power Supply
Applications
Programmable logic controllers
Automatic controls
Industrial controls
Test equipment
Motor-Base machinery
Features
All outputs are isolated outputs
Output 2 & 3 have polarity option (+ or -)
High Reliability and Efficiency
Power on LED indicator
Built-in EMI filter
Low ripple noise
Over voltage, over load, short circuit protection
100% full load burn in test
-20°C to 70°C operating temperature
UL, cUL, TUV, CB & CE approved
Model No
SPS-060P-IT1
SPS-060P-IT2
SPS-060P-IT3
SPS-060P-IT4
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
12V
-15V
5V
12V
24V
Current (amps)
8A
4A
1A
7A
4A
1A
7A
3A
1A
6A
2A
1.2A
Power (watts)
60W
60W
60W
60W
R&N (mV)
70mV
120mV
100mV
70mV
120mV
150mV
70mV
150mV
200mV
70mV
120mV
200mV
Efficiency (%)
75%
76%
76%
78%
Description
SPS-060P-IT is a triple isolated output enclosed switch mode power supply range with PFC function. These high
reliability enclosed power supplies have universal full range input voltage and wide range operating temperatures of 20°C to 70°C. The second & third output voltages can also be set as positive or negative.
Page 32
Avanti Power Repairs Ltd
SPS-060PT Series - 60W Triple Output AC-DC Enclosed Power Supply
Features
Power ON with LED indicator
Built-in EMI filter, low ripple noise
PFC function optional
Over load, over voltage protection
Short circuit shutdown and Auto recovery
100% 50° burn-in test.
UL, cUL, TUV, CB, CE approved
Model No
SPS-060PT1
SPS-060PT2
SPS-060PT3
SPS-060PT4
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
12V
24V
Current (amps)
8A
4A
1A
7A
4A
1A
7A
3A
1A
6A
2A
1.2A
Page 33
Power (watts)
60W
60W
60W
60W
R&N (mV)
50mV
120mV
100mV
50mV
120mV
150mV
50mV
150mV
200mV
50mV
120mV
200mV
Efficiency (%)
74%
74%
74%
74%
Avanti Power Repairs Ltd
SPS-060P-Q Series - 60W Quad Output AC-DC PFC Enclosed Power Supply
Applications
Programmable logic controllers
Automatic controls
Industrial controls
Test equipment
POS systems
Features
Universal input AC 85~264V or DC 120~375V
High reliability and high efficiency
Power ON with LED indicator
Built-in EMI filter, low ripple noise
Over voltage protection
Over load & short circuit protection
100% full load burn-in test
-20°C to 70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-060P-Q1
Voltage (max)
5V
12V
-5V
-12V
Current (amps)
7A
3A
1A
1A
Power (watts)
60W
R&N (mV)
70mV
120mV
100mV
240mV
Efficiency (%)
75%
Description
SPS-060P-Q is a quad output AC/DC enclosed power supply with universal input of PWM IC design. Standard
features include built in PFC, wide operating temperatures of -20°C to +70°C and over voltage, Over load & short
circuit protections.
Page 34
Avanti Power Repairs Ltd
RD-65 Series - 65W Dual Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RD-65A
RD-65B
Voltage (max)
5V
12V
5V
24V
Current (amps)
6A
3A
4A
2A
Power (watts)
66W
68W
R&N (mV)
80mV
120mV
80mV
150mV
Efficiency (%)
79%
78%
Description
A highly efficient and reliable enclosed power supply, with a high operating temperature of -25~+70°C and cooling
by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations. Overload, short
circuit and over voltage protection with hiccup mode (recovering automatically after fault condition is removed).
Page 35
Avanti Power Repairs Ltd
RID-65 Series - 65W Dual Isolated Output AC-DC Switching Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Isolated output & ground
Universal AC input
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
UL, cUL, TUV, CE & CB approvals
Model No
RID-65A
RID-65B
Voltage (max)
5V
12V
5V
24V
24V
Current (amps)
6A
3A
4A
2A
2A
Power (watts)
66W
68W
R&N (mV)
80mV
120mV
80mV
150mV
150mV
Efficiency (%)
81%
82%
Description
A highly efficient and reliable dual output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Isolated output and ground for both channels. Built to withstand 300VAC surge
input for 5 seconds and 5G vibrations. Overload, short circuit and over voltage protection with hiccup mode
(recovering automatically after fault condition is removed).
Page 36
Avanti Power Repairs Ltd
RT-65 Series - 65W Triple Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RT-65A
RT-65B
RT-65C
RT-65D
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
Current (amps)
6A
3A
0.5A
6A
3A
0.5A
5A
2.2A
0.5A
4A
2A
1A
Power (watts)
66.1W
65W
66W
68W
R&N (mV)
80mV
120mV
80mV
80mV
120mV
80mV
80mV
120mV
80mV
80mV
150mV
120mV
Efficiency (%)
77%
77%
78%
79%
Description
A highly efficient and reliable triple output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 37
Avanti Power Repairs Ltd
RQ-65 Series - 65W Quad Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RQ-65B
RQ-65C
Voltage (max)
5V
12V
-5V
-12V
5V
15V
-5V
Current (amps)
6A
2A
0.5A
0.5A
5A
2A
0.5A
Power (watts)
62.5W
62.5W
62.5W
62.5W
65W
65W
65W
R&N (mV)
80mV
120mV
80mV
80mV
80mV
120mV
80mV
Efficiency (%)
76%
76%
Description
A highly efficient and reliable quad output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 38
Avanti Power Repairs Ltd
EPS-65-C Series - 65W Single Ouput Enclosed Switching Power Supply
Applications
Factory Automation
Electrical or mechanical equipment
Features
Universal AC input/Full range
Optional L-Bracket and cover
High efficiency up to 90%
Protections: Short circuit/Overload/Over voltage
Cooling by free air convection
2" x 4" compact size
LED indicator for power on
No load power consumption <0.3W
Model No
EPS-65-3-3-C
EPS-65-5-C
EPS-65-7-5-C
EPS-65-12-C
EPS-65-15-C
EPS-65-24-C
EPS-65-36-C
EPS-65-48-C
Voltage (max)
3.3V
5V
7.5V
12V
15V
24V
36V
48V
Current (amps)
11A
11A
8A
5.42A
4.34A
2.71A
1.81A
1.36A
Power (watts)
36.3W
55W
60W
65.04W
65.1W
65.04W
72W
72W
R&N (mV)
80mV
80mV
100mV
120mV
150mV
240mV
280mV
300mV
Efficiency (%)
80%
82%
84%
86%
87%
88%
89%
90%
Description
The EPS-65-C series is a 65W single output high efficiency AC/DC green open frame switching power supply.
Possessing up to 90% of high efficiency the unit can be cooled from -30~+70°C ambient temperature which is
required for operating in a closed loop system.
Page 39
Avanti Power Repairs Ltd
SPS-070 Series - 72W Single Output NON PFC Switching Power Supply
Applications
Logic control circuit designing
Automatic control systems
Industrial control systems
Test equipment
Printers
POS systems
Electronic voting machines
Franking machines
Gambling machines
Features
Green-mode design
No load power consumption <0.75W
Universal input
Output voltage ±10% adjustment
100% full load burn-in test
Over voltage, over load, short circuit protections
-20°C to 70°C operating temperature
Power On with LED indicator
UL, cUL, TUV, CB, CE Approvals
Model No
SPS-070-3-3
SPS-070-05
SPS-070-12
SPS-070-15
SPS-070-24
SPS-070-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Current (amps)
15A
12A
6A
5A
3A
2A
Power (watts)
50W
60W
72W
72W
72W
72W
R&N (mV)
50mV
50mV
120mV
150mV
150mV
150mV
Efficiency (%)
73%
76%
81%
82%
84%
86%
Description
SPS-070 Series is a 72W single output enclosed switching power supply that offers’ 3.3V, 5V, 12V, 15V, 24V &
48V output options. Which are adjustable by ±10%. With no load power consumption <0.75W and efficiency up to
86% SPS-070 also complies to new CE directive LVD 2006/95/EC and EMC 2004/108/EC and UL, cUL, CB
EN60950-1 approvals
Page 40
Avanti Power Repairs Ltd
SPS-070P Series - 72W Single Output PFC Switching Power Supply
Applications
Logic control circuit designing
Automatic control systems
Industrial control systems
Test equipment
Printers
POS systems
Electronic voting machines
Franking machines
Gambling machines
Features
Green-mode design
No load power consumption <0.75W
Universal input
PFC function
Output voltage ±10% adjustment
100% full load burn-in test
Over voltage, over load, short circuit protections
-20°C to 70°C operating temperature
Power On with LED indicator
UL, cUL, TUV, CB, CE Approvals
Model No
SPS-070P-3-3
SPS-070P-05
SPS-070P-12
SPS-070P-15
SPS-070P-24
SPS-070P-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Specifications
Input Voltage
Input frequency
Input Current
Inrush Current
Leakage Current
Rise time
Over Load Protection
Short Circuit Protection
Operating Temperature
Current (amps)
15A
12A
6A
5A
3A
2A
Power (watts)
50W
60W
72W
72W
72W
72W
R&N (mV)
50mV
50mV
120mV
150mV
150mV
150mV
Efficiency (%)
73%
76%
81%
82%
84%
86%
85~264 VAC or 120~375VDC, universal input
47 ~ 63Hz
<1.8A max at 100VAC input, full load condition
<30A@115V / <60A@230VAC input
Cold start 25°C ambient
<1.5mA@264VAC input
<20mS
Over 105% ~ 150% of rating, recovers
Automatically after fault condition has been removed.
Shutdown, recovers automatically after fault condition has been removed
-20°C ~ 70°C; De-rating 45°C ~ 50°C : 2.0%/°C
Description
SPS-070P Series is a 72W single output PFC Function enclosed switching power supply that offers 3.3V, 5V, 12V,
15V, 24V & 48V output options. Which are adjustable by ±10%. With no load power consumption <0.75W and
efficiency up to 86% SPS-070P also complies to EN61000-3-2 Class A, new CE directive LVD 2006/95/EC and
EMC 2004/108/EC and UL, cUL, CB EN60950-1 approvals
Page 41
Avanti Power Repairs Ltd
SPS-075 Series - AC-DC Single Output Enclosed Power Supply
Features
85V to 132 V or 170V to 264V Selected by switch
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
Non min load requirement
100% 50° burn-in test
Meets UL, cUL, TUV, CB, CE standard
Model No
SPS-075-3-3
SPS-075-05
SPS-075-7-5
SPS-075-10
SPS-075-12
SPS-075-15
SPS-075-18
SPS-075-24
SPS-075-28
SPS-075-48
Voltage (max)
3.3V
5V
8V
10V
12V
15V
18V
24V
28V
48V
Current (amps)
18A
15A
10A
8A
6.3A
5A
4.2A
3.2A
3A
2A
Page 42
Power (watts)
75W
75W
75W
75W
75W
75W
75W
75W
75W
75W
R&N (mV)
50mV
50mV
100mV
100mV
120mV
150mV
180mV
240mV
280mV
480mV
Efficiency (%)
70%
72%
73%
74%
75%
76%
77%
78%
79%
80%
Avanti Power Repairs Ltd
RS-75 Series - 75W Single Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Small scale LED signs
Features
Universal AC input / Full range
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-75-5
RS-75-3-3
RS-75-12
RS-75-15
RS-75-24
RS-75-48
Voltage (max)
3.3V
12V
15V
24V
48V
Current (amps)
12A
15A
6A
5A
3.2A
2A
Power (watts)
60W
50W
72W
75W
77W
77W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Efficiency (%)
76%
71%
81%
82%
85%
86%
Specification
Input Voltage
88 ~ 264Vac 125 ~ 373Vdc
Input frequency
47 ~ 63Hz
Input Current
2A/115Vac 1.2A/230Vac
Inrush Current
40A/230Vac cold start
Leakage Current
<2mA / 240Vac
Storage Temperature, Humidity -40°C ~ +85°C, 10 ~ 95% RH
Working Humidity
20 ~ 90% RH non-condensing
Temperature Coefficient
±0.03%/°C (0~50°C)
Over Load Protection
110 ~ 150% rated output power
Hiccup mode, recovers automatically after Fault condition is removed
Over Voltage Protection
Hiccup mode, recovers automatically after fault condition is removed
MTBF
265Khrs min. MIL-HDBK-217F (25°C)
Description
The new RS-75 Series are 20% smaller than their 75W counterpart and are our most miniature AC/DC enclosed type
switching power supplies that can provide 75W by only free air convection. RS-75 is fully RoHS compliant and all
the electrolytic capacitors in the unit are rated in 105°C. RS-75 can also withstand 300VAC input surge for 5 seconds
and 5G vibration meaning that is suitable for operation in harsh environments. Full output wattage can be provided up
to 50°C and the highest operating temperature is as high as 70°C, with certain de-rating. Other standard functions
include short circuit, overload, over voltage, and over temperature protections.
Page 43
Avanti Power Repairs Ltd
SP-75 Series - 75W Single Output Switching Power Supply
Applications
General electronic equipment
Automation
Test equipment
Features
Universal AC input/Full range
Built-in active PFC function, PF>0.93
Protections: Short circuit/Overload/Over voltage
Built-in constant current limiting circuit
Low profile: 33mm thickness
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
Model No
SP-75-3-3
SP-75-5
SP-75-7-5
SP-75-12
SP-75-13-5
SP-75-15
SP-75-24
SP-75-27
SP-75-48
Voltage (max)
3.3V
5V
8V
12V
14V
15V
24V
27V
48V
Current (amps)
15A
15A
10A
6.3A
6A
5A
3.2A
3A
2A
Power (watts)
50W
75W
75W
76W
76W
75W
77W
76W
77W
R&N (mV)
80mV
80mV
80mV
80mV
80mV
80mV
100mV
100mV
100mV
Efficiency (%)
68%
72%
74%
77%
78%
79%
80%
80%
80%
Description
The SP-75 series is a single output switching power supply with universal AC input. This power supply has a low
profile of 33mm and built-in constant current limiting circuit. Protections including short circuit, overload and over
voltage. With a fixed switching frequency at PFC: 67KHz, PWM: 134KHz enabling designs to avoid interference
with system clock frequencies.
Page 44
Avanti Power Repairs Ltd
HRP-75 Series - 75W Single Output AC-DC Enclosed Power Supply with PFC
Applications
General electronics
Factory automation
Moving signs
LED displays
Test and measurement equipment
electrical and mechanical industry
Features
Universal AC input
Built-in active PFC function >0.9
No load power consumption <0.5W
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
1U low profile 38mm
Built-in remote on/off control
Model No
HRP-75-3-3
HRP-75-5
HRP-75-7-5
HRP-75-12
HRP-75-15
HRP-75-24
HRP-75-36
HRP-75-48
Voltage (max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (amps)
15A
15A
10A
6.3A
5A
3.2A
2.1A
2A
Power (watts)
50W
75W
75W
76W
75W
77W
76W
77W
R&N (mV)
80mV
80mV
100mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
77%
82.5%
84%
87%
88%
88.5%
89%
89%
Description
HRP-75 Series are a 75W miniature high reliability ac/dc enclosed power supply range that has many energy saving
features to help the end user equipment comply with the requirements of energy star and EuP.
Page 45
Avanti Power Repairs Ltd
SPS-G075 Series - 75W Single Output Green Mode Enclosed Power Supply
Applications: Logic control circuit designing, Industrial control systems, POS systems, Electronic voting machines
Franking machines, Gambling machines
Features
Green-mode designing, no load < 0.5W
High efficiency and high reliability
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
100% full load burn-in test
-20°C to +70°C operating temperature
Model No
SPS-G075-05
SPS-G075-12
SPS-G075-15
SPS-G075-24
SPS-G075-30
SPS-G075-48
SPS-G075-T4B
Voltage (max)
5V
12V
15V
24V
30V
48V
5V
15V
-15V
Specification
Input Voltage
Input frequency
Input Current
Inrush Current
Current (amps)
12A
6A
5A
3.2A
2.5A
2A
8A
3A
1A
Power (watts)
60W
72W
75W
77W
75W
77W
68W
R&N (mV)
70mV
120mV
150mV
150mV
200mV
200mV
70mV
120mV
100mV
Efficiency (%)
77%
82%
83%
84%
86%
86%
78%
Short Circuit Protection
Operating Temperature
Cooling
88V ~ 264Vav or 125V ~ 375Vdc
47 ~ 63Hz
<1.8A@100Vac input, full load condition
<30A@115V , <50A@230Vav input,
Cold start at 25°C ambient
<1.5mA@264Vac input
<30mS
>60mS@230V, full load condition
Shutdown, re-power on to recover
Over 105%~ 150% of rating, recovers automatically after fault condition has been
removed.
Shutdown, recovers automatically after fault condition has been removed.
-20°C ~ +70°C ; De-rating: 45°C ~ 70°C: 2.5%/°C
Natural cooling
Operating Humidity
20% ~ 85% (non condensing)
Leakage Current
Rise Time
Hold Up Time
Over Voltage Protection
Over Load Protection
Description
SPS-G075 Series are single output Green Mode Designed enclosed power supplies. With no load power consumption
levels less than 0.5Watts, operating temperatures from -20°C to +70°C and efficiency up to 86% SPS-G075 is an
ideal power supply for applications with environmental protection requirements.
Page 46
Avanti Power Repairs Ltd
RSP-75 Series - 75W PFC Function Single Output Enclosed Power Supplies
Applications
Industrial automation system
Mechanical equipment
Electrical equipment
Household appliances
Instrumentation
Features
Universal 85-264VAC input
Built-in constant current limiting circuit
1U low profile
Remote on-off control
Built-in active PFC function
Cooling via free air convection
Model No
RSP-75-3-3
RSP-75-5
RSP-75-7-5
RSP-75-12
RSP-75-13-5
RSP-75-15
RSP-75-24
RSP-75-27
RSP-75-48
Voltage (max)
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
48V
Current (amps)
15A
15A
10A
6.3A
5.6A
5A
3.2A
2.8A
1.6A
Power (watts)
49.5W
75W
75W
75.6W
75.6W
75W
76.8W
75.6W
76.8W
R&N (mV)
80mV
80mV
80mV
120mV
120mV
120mV
120mV
120mV
200mV
Efficiency (%)
76%
82%
84%
85%
85%
86%
87%
88%
89%
Description
RSP-75 Series are 1U low profile 75W PFC function enclosed switching power supplies, offering high efficiency
levels of 89%. The range has a fanless design with built-in constant current limiting circuit, remote on/off control and
protections including short circuit, over load and over voltage. Output options for RSP-75 Series include 3.3V, 5V,
7.5V, 12V, 13.5V, 15V, 24V, 27V & 48V models.
Page 47
Avanti Power Repairs Ltd
SPS-G075-D Series - 75W Dual Output AC-DC Enclosed Power Supply
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Full range AC input
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G075-D1
SPS-G075-D2
Voltage (max)
5V
12V
5V
24V
Current (amps)
8A
5A
8A
2.5A
Power (watts)
68W
68W
R&N (mV)
70mV
120mV
70mV
200mV
Efficiency (%)
78%
79%
Description
SPS-G075-D Series are dual output power supplies with IC function, creating operating temperatures as low as 20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide use.
Isolated output version, SPS-G075-ID Series, is also available.
Page 48
Avanti Power Repairs Ltd
SPS-G075-ID Series - 75W Isolated Dual Output AC-DC Enclosed PSU
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Output 1 & 2 isolated
Full range AC input
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G075-ID1
SPS-G075-ID2
Voltage (max)
5V
12V
5V
24V
Current (amps)
8A
5A
8A
2.5A
Power (watts)
68W
68W
R&N (mV)
70mV
120mV
70mV
200mV
Efficiency (%)
78%
79%
Description
SPS-G075-ID Series are dual isolated output power supplies with IC function, creating operating temperatures as
low as -20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide
use.
Page 49
Avanti Power Repairs Ltd
SPS-G075-T Series - 75W Triple Output AC-DC Enclosed Power Supply
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Full range AC input
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G075-T1A
SPS-G075-T1B
SPS-G075-T3
SPS-G075-T4A
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
12V
24V
5V
15V
24V
Current (amps)
8A
3A
1A
8A
3A
1A
8A
3A
2A
8A
3A
2A
Power (watts)
65W
65W
68W
68W
R&N (mV)
70mV
120mV
100mV
70mV
120mV
100mV
70mV
120mV
200mV
70mV
120mV
200mV
Efficiency (%)
76%
78%
78%
78%
Description
SPS-G075T Series are triple output power supplies with IC function, creating operating temperatures as low as 20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide use, and
the output voltage is adjustable by 10%.
Page 50
Avanti Power Repairs Ltd
TP-75 Series - 75W Triple Output PFC Function Power Supply
Applications
General electronic equipment
Factory automation
Instrumentation
Moving signs
Telecommunications
Data communications
Features
Universal AC input/Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit/Overload/Over voltage
Low profile: 33mm thickness
LED indicator for power on
Cooling by free air convection
Fixed switching frequency at PFC:67KHz PWM:134KHz
Model No
TP-75A
TP-75B
TP-75C
TP-75D
TP-7503
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
5V
3.3V
12V
Current (amps)
7A
3A
1A
7A
3A
0.4A
6A
2.5A
0.5A
7A
2A
0.4A
9A
8A
0.3A
Power (watts)
74W
76W
75W
76W
75W
R&N (mV)
100mV
120mV
100mV
100mV
120mV
120mV
100mV
120mV
120mV
100mV
120mV
120mV
100mV
50mV
120mV
Efficiency (%)
70%
70%
70%
70%
70%
Description
The TP-75 Series is a triple output enclosed power supply with PFC function. Cooling by free air convection allowing
an operating temperature of -10~+60°C. Protections including short circuit, overload and over voltage. With a fixed
switching frequency at PFC: 67KHz, PWM: 134KHz enabling designs to avoid interference with system clock
frequencies.
Page 51
Avanti Power Repairs Ltd
SPS-G075-Q Series - 75W Quad Output AC-DC Enclosed Power Supply
Applications
Programmable logic controller
Automatic control systems
Test equipment
Printers
POS systems
Franking machines
Features
Full range AC input
Built in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and auto recovery
100% full load burn-in test
-20°C ~70°C Operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G075-Q1
SPS-G075-Q3
SPS-G075-Q4
Voltage (max)
5V
12V
-5V
-12V
5V
12V
24V
-12V
5V
15V
24V
-15V
Current (amps)
8A
3A
1A
1A
8A
3A
2A
1A
8A
3A
2A
1A
Power (watts)
65W
68W
68W
R&N (mV)
70mV
120mV
100mV
100mV
70mV
120mV
200mV
100mV
70mV
120mV
200mV
100mV
Efficiency (%)
76%
78%
78%
Description
SPS-G075-Q Series are quad output power supplies with IC function, creating operating temperatures as low as 20°C. The input voltage range is from 88V ~ 264Vac or 125V ~ 375Vdc, making it suitable for worldwide use.
Page 52
Avanti Power Repairs Ltd
RD-85 Series - 85W Dual Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RD-85A
RD-85B
Voltage (max)
5V
12V
5V
24V
Current (amps)
8A
4A
8A
2A
Power (watts)
88W
88W
R&N (mV)
80mV
120mV
80mV
120mV
Efficiency (%)
78%
80%
Description
A highly efficient and reliable enclosed power supply, with a high operating temperature of -25~+70°C and cooling by
free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations. Overload, short circuit
and over voltage protection with hiccup mode (recovering automatically after fault condition is removed).
Page 53
Avanti Power Repairs Ltd
RID-85 Series - 85W Dual Isolated Output Enclosed Switching Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Isolated output & ground
Universal AC input
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
UL, cUL, TUV, CB & CE approvals
Model No
RID-85A
RID-85B
Voltage (max)
5V
12V
5V
24V
Current (amps)
8A
4A
8A
2A
Power (watts)
88W
88W
R&N (mV)
80mV
120mV
80mV
120mV
Efficiency (%)
80%
81%
Description
A highly efficient and reliable dual output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Isolated output and ground for both channels. Built to withstand 300VAC surge
input for 5 seconds and 5G vibrations. Overload, short circuit and over voltage protection with hiccup mode
(recovering automatically after fault condition is removed).
Page 54
Avanti Power Repairs Ltd
RQ-85 Series - 85W Quad Output Enclosed Switching Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Universal AC input / Full range
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RQ-85B
RQ-85C
RQ-85D
Voltage (max)
5V
12V
-5V
-12V
5V
15V
-5V
-15V
5V
12V
24V
-12V
Current (amps)
7A
3.1A
0.5A
0.5A
7A
2.5A
0.5A
0.5A
6A
2A
1A
0.5A
Power (watts)
81W
81W
81W
81W
82.5W
82.5W
82.5W
82.5W
84W
84W
84W
84W
R&N (mV)
80mV
120mV
100mV
80mV
80mV
120mV
100mV
80mV
80mV
120mV
150mV
80mV
Efficiency (%)
76%
77%
78%
Description
A highly efficient and reliable quad output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 55
Avanti Power Repairs Ltd
RT-85 Series - 85W Triple Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
test equipment
Features
Universal AC input / Full range
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RT-85A
RT-65B-85
RT-65C-85
RT-65D-85
Voltage (max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
Current (amps)
8A
4A
0.5A
8A
4A
0.5A
5A
2.2A
0.5A
4A
2A
1A
Power (watts)
84.5W
88W
66W
68W
R&N (mV)
80mV
120mV
100mV
80mV
120mV
120mV
80mV
120mV
120mV
80mV
150mV
120mV
Efficiency (%)
76%
76%
78%
79%
Description
A highly efficient and reliable triple output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 56
Avanti Power Repairs Ltd
SPU-100 Series - 100W Single Output U-Bracket Switching Power Supply
Features
Universal full range AC 90 ~ 264V
High efficiency.
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
100% 50°C burn-in test
Short circuit/over load/ over voltage protected
UL/CSA/TUV/CE standard
Model No
SPU-100-5
SPU-100-24
Voltage (max)
5V
24V
Current (amps)
20A
4.2A
Page 57
Power (watts)
100W
100W
R&N (mV)
50mV
240mV
Efficiency (%)
72%
80%
Avanti Power Repairs Ltd
HRP-100 Series - 100W Single Output AC-DC Enclosed Power Supply with PFC Function
Applications
General electronic machinery
Factory automation
Instrumentation
Moving Signs
Telecommunications
Data communications
Features
Universal AC input / Full range
Built-in active PFC function
High efficiency up to 90%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Protections: Over temperature (optional)
Cooling by free air convection
1U low profile 38mm
Built-in remote ON-OFF control
No load power consumption<0.5W
All using 105°C long life electrolytic capacitors
Model No
HRP-100-3-3
HRP-100-5
HRP-100-7-5
HRP-100-12
HRP-100-15
HRP-100-24
HRP-100-36
HRP-100-48
Voltage (max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (amps)
20A
17A
14A
8.5A
7A
4.5A
3A
2.2A
Power (watts)
66W
85W
101.3W
102W
105W
108W
104.4W
106W
R&N (mV)
80mV
80mV
100mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
78%
83%
84%
88%
88%
88.5%
89%
90%
Description
The HRP-100 series is a highly efficient (up to 90%) single output enclosed power supply. Equipped with built-in
active PFC function, including protections including short circuit, overload and over voltage. With a low 1U profile
of 38mm and cooling by free air convection allowing an operating temperature of -40~+60°C.
Page 58
Avanti Power Repairs Ltd
PSC-100C Series - 100W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger
Applications
Security systems
Access control systems
Emergency lighting systems
Alarm systems
UPS systems
Central monitoring systems
Features
90-264VAC Universal AC input
Enclosed within L-Bracket and cover case
Short circuit, over load, over voltage protections
Battery low protection / Battery polarity protection by fuse
Relay contact signal output for AC OK and Battery low
Cooling by free air convection
Model No
PSC-100A-C
PSC-100B-C
Voltage (max)
13.8V
13.8V
27.6V
27.6V
Current (amps)
4.75A
2.5A
2.4A
1.25A
Power (watts)
100.05W
R&N (mV)
100mV
Efficiency (%)
86%
100.74W
100mV
88%
Description
PSC-100C Series is a 100W AC/DC enclosed power supply with additional charger output, designed primarily for the
security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output options
and short circuit, over load and over voltage protections. PSC-100C Series has been designed with battery low
protection, battery polarity protection, via fuse, and relay contact signal output for AC OK and Battery low making it
ideal for security systems.
Page 59
Avanti Power Repairs Ltd
RSP-100 Series - 100W 1U Single Output Enclosed Power Supplies with PFC Function
Applications
Industrial automation systems
Mechanical & electrical equipment
Instrumentation
Household appliances
Applications requiring a low profile installation
Features
Universal full range AC input
Built-in active PFC function
Short circuit, over load, over voltage, over temperature
protections
Built-in constant current limiting circuitry
Cooling by free air convection
1U low profile 30mm
Remote On-Off Control
LED indicator for power on
Model No
RSP-100-3-3
RSP-100-5
RSP-100-7-5
RSP-100-12
RSP-100-13-5
RSP-100-15
RSP-100-24
RSP-100-27
RSP-100-48
Voltage (max)
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
48V
Current (amps)
20A
20A
13.5A
8.5A
7.5A
6.7A
4.2A
3.8A
2.1A
Power (watts)
66W
100W
101.25W
102W
101.25W
100.5W
100.8W
102.6W
100.8W
R&N (mV)
100mV
100mV
100mV
100mV
100mV
100mV
150mV
150mV
250mV
Efficiency (%)
83%
86%
87%
86%
86.5%
87%
87%
87%
88%
Description
RSP-100 Series extends the RSP range to include a lower 100W of output power, in a 1U low profile 30mm
enclosure. These enclosed power supplies feature high efficiency, free air convection cooling and a 1U low profile
making them ideal for end users looking for energy saving, noise free and low profile economical power supplies. The
RSP-100 Series, from Mean Well provides output voltages from 3.3V to 48V, features 85-264Vac input range, is
equipped with PFC function and possesses up to 88% high efficiency. Other built in features of this Mean Well
enclosed power supply range include remote on/off control, short circuit, over load, over voltage and over
temperature protections. The series also complies with UL, CUL, TUV, CCC, CB & CE safety regulations and is
certified to TUV EN61558-2-16 to meet the requirements of household electrical appliances.
Page 60
Avanti Power Repairs Ltd
RS-100 Series - 100W Single Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Small scale LED signs
Features
Universal AC input
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-100-3-3
RS-100-5
RS-100-12
RS-100-15
RS-100-24
RS-100-48
Voltage (max)
3.3V
5V
12V
15V
24V
48V
Current (amps)
20A
16A
8.5A
7A
4.5A
2.3A
Power (watts)
66W
80W
102W
105W
108W
110.4W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Efficiency (%)
74%
77%
81%
82%
84%
84%
Description
The new RS-100 Series are 20% smaller than their 100W counterpart and are our most miniature AC/DC enclosed
type switching power supplies that can provide 100W by only free air convection. RS-100 is fully RoHS compliant
and all the electrolytic capacitors in the unit are rated in 105°C. RS-100 can also withstand 300VAC input surge for 5
seconds and 5G vibration meaning that is suitable for operation in harsh environments. Full output wattage can be
provided up to 50°C and the highest operating temperature is as high as 70°C, with certain de-rating. Other standard
functions include short circuit, overload, over voltage, and over temperature protections.
Page 61
Avanti Power Repairs Ltd
SPS-S100 Series - 100W Single Output AC-DC Enclosed Power Supply
Features
Light weight, compact size
Universal AC input
Over load, over voltage & short circuit protection
Output voltage ±10% adjustment
Built-in EMI filter, low ripple noise
100% 50° burn-in test
Meet UL, cUL, CB, CE ,TUV standard
Model No
SPS-S100-3-3
SPS-S100-05
SPS-S100-7-5
SPS-S100-12
SPS-S100-15
SPS-S100-24
SPS-S100-30
SPS-S100-48
Voltage (max)
3.3V
5V
8V
12V
15V
24V
30V
48V
Current (amps)
20A
16A
11A
8.5A
7A
4.5A
4A
2.3A
Page 62
Power (watts)
66W
80W
83W
102W
105W
108W
108W
110W
R&N (mV)
50mV
50mV
75mV
120mV
120mV
120mV
300mV
300mV
Efficiency (%)
70%
77%
78%
81%
82%
84%
84%
85%
Avanti Power Repairs Ltd
SPS-G100 Series - 100W Single Output AC/DC Green Mode Enclosed Power Supply
Applications
Programmable logic controllers
Automatic controls
Industrial controls
Test equipment
Printers
POS systems
Electronic voting machines
Franking machines
Gambling machines
Features
Green mode design, no load <1W
High efficiency and high reliability
Built in EMI filter, low ripple noise
Over voltage protection:Shutdown and latch off
Over load & short circuit protection:Hiccup mode
Output voltage ±10% adjustment
-20~70 Operating temperature
Power ON with LED indicator
UL, cUL, TUV, CB, CE approved
Model No
SPS-G100-3-3
SPS-G100-05
SPS-G100-7-5
SPS-G100-12
SPS-G100-15
SPS-G100-24
SPS-G100-30
SPS-G100-48
SPS-G100-ID6
Voltage (max)
3.3V
5V
8V
12V
15V
24V
30V
48V
24V
5V
Current (amps)
20A
16A
12A
8.5A
7A
4.5A
4A
2.3A
4A
3A
Power (watts)
66W
80W
90W
102W
105W
108W
108W
110W
90W
R&N (mV)
70mV
80mV
80mV
120mV
150mV
150mV
200mV
200mV
200mV
80mV
Efficiency (%)
74%
77%
79%
81%
82%
84%
84%
85%
81%
Description
SPS-G100 is a 100W universal AC input green mode design enclosed power supply range. Available in 3.3V, 5V,
7.5V, 12V, 15V, 24V, 30V & 48V outputs. With no load power consumption less than 1W at 230VAC, high
efficiency up to 85% and high reliability this is a truly green mode power supply.
Page 63
Avanti Power Repairs Ltd
SP-100 Series - 100W Single Output Enclosed Power Supply with PFC Function
Applications
General electronic equipment
Automation
Test equipment
Features
Universal AC input/full range
Built-in active PFC function, PF>0.93
Protections: Short circuit/Overload/ Over voltage
Built-in constant current limiting circuit
Remote ON-OFF control (Optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
Model No
SP-100-3-3
SP-100-5
SP-100-7-5
SP-100-12
SP-100-13-5
SP-100-15
SP-100-24
SP-100-27
SP-100-48
Voltage (max)
3.3V
5V
8V
12V
14V
15V
24V
27V
48V
Current (amps)
20A
20A
14A
8.5A
8A
7A
4.2A
4A
2.1A
Power (watts)
66W
100W
101.25W
102W
101.25W
100.5W
101W
103W
101W
R&N (mV)
100mV
100mV
100mV
100mV
100mV
100mV
100mV
150mV
150mV
Efficiency (%)
70%
76%
78%
80%
80%
82%
84%
83%
82%
Description
The Sp-100 series is a 100W single output switching power supply with PFC function. Protections including short
circuit, overload and over voltage. With fixed switching frequency at PFC: 67KHz, PWM: 134KHz enabling designs
to avoid interference with system clock frequencies.
Page 64
Avanti Power Repairs Ltd
SPS-100P Series - 100W Single Output AC/DC PFC Power Supply
Applications
Programmable logic controller
Automatic controls
Industrial controls
Test equipment
Printers
POS systems
Electronic voting machines
Franking machines
Gambling machines
Features
Power ON with LED indicator
Built-in EMI filter, low ripple noise
Over voltage protection
Over load & short circuit protection
Output voltage ±10% adjustment
100% full load burn-in test
-20°C to 70°C operating temperature
UL, cUL, TUV, CB, CE standard
Model No
SPS-100P-3-3
SPS-100P-05
SPS-100P-12
SPS-100P-15
SPS-100P-24
SPS-100P-30
SPS-100P-48
Voltage (max)
3.3V
5V
12V
15V
24V
30V
48V
Current (amps)
23A
20A
8.5A
7A
4.3A
4A
2.3A
Power (watts)
76W
100W
102W
105W
103W
105W
110W
R&N (mV)
70mV
70mV
120mV
150mV
240mV
240mV
300mV
Efficiency (%)
74%
78%
83%
84%
84%
85%
86%
Description
SPS-100P Series is a range of 100W single output power supplies with PFC and full range AC input for worldwide
use. The new circuit of SPS-100P includes a built-in PWM control IC which brings the max output wattage on the
48V output model up to 110W, in natural cooling conditions.
Page 65
Avanti Power Repairs Ltd
SPS-100PD Series - 100W Dual Output Switching Power Supply
Features
Universal AC input, PFC function (option)
Built-in EMI filter, low ripple noise
Over load, over voltage & short circuit protection
100% 50° burn-in test
UL, cUL, TUV, CB, CE certified
Isolated outputs
Model No
SPS-100PD4
SPS-100PD3
SPS-100PD1
SPS-100PD2
Voltage (max)
-15V
-12V
12V
24V
Current (amps)
4A
5A
6A
4A
Page 66
Power (watts)
100W
100W
100W
100W
R&N (mV)
150mV
120mV
120mV
240mV
Efficiency (%)
76%
76%
76%
76%
Avanti Power Repairs Ltd
SPS-G100-D Series - 100W Dual Output AC/DC Enclosed Switch Mode Power Supply
Applications
Automatic control systems
Programmable logic controllers
Test equipment
Features
Universal full range input
Power on with LED indicator
Built in EMI filter, low ripple noise
Over voltage protection - Shutdown and latch off
Over load & short circuit protections - Hiccup mode
100% full load burn-in test
-20°C ~ +70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G100-D1
SPS-G100-D2
Voltage (max)
5V
12V
5V
24V
Current (amps)
10A
6A
10A
3A
Power (watts)
88W
90W
R&N (mV)
80mV
120mV
80mV
200mV
Efficiency (%)
78%
79%
Description
SPS-G100-D Series is a dual output enclosed power supply range designed with wide operating temperature ranges.
These enclosed power supplies comply with EN61000-3-2 Class A and are approved to UL, cUL, CB and TUV
EN60950-1:2006.
Page 67
Avanti Power Repairs Ltd
SPU-100-D Series - 100W Dual Output U-Bracket Power Supply
Features
Universal AC input
Built in EMI filter
100% 50° burn-in test
Low ripple noise
High efficiency
Overload, over voltage & short circuit protection
Approvals: UL/cUL/TUV/CE/CB
Model No
SPU-100-D1
SPU-100-D2
SPU-100-D3
Voltage (Max)
5V
12V
5V
24V
24V
5V
Current (Amps)
20A
2.5A
20A
2A
4.2A
2A
Page 68
Power (Watts)
100W
100W
100W
R&N (mV)
50mV
80mV
50mV
120mV
120mV
50mV
Efficiency (%)
74%
75%
77%
Avanti Power Repairs Ltd
SPS-G100-ID Series - 100W Dual Isolated Output AC/DC Enclosed Switch Mode Power Supply
Applications
Automatic control systems
Programmable logic controllers
Test equipment
Features
Output 1 & 2 are isolated
Universal full range input
Power on with LED indicator
Built in EMI filter, low ripple noise
Over voltage protection - Shutdown and latch off
Over load & short circuit protections - Hiccup mode
First output voltage +/-10% adjustable on ID5 & ID6
100% full load burn-in test
-20°C ~ +70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G100-ID1
SPS-G100-ID2
SPS-G100-ID5
Voltage (Max)
5V
12V
5V
24V
12V
5V
Current (Amps)
10A
6A
10A
3A
7A
3A
Power (Watts)
88W
90W
88W
R&N (mV)
80mV
120mV
80mV
200mV
120mV
80mV
Efficiency (%)
78%
79%
79%
Description
SPS-G100-ID Series is a dual isolated output enclosed power supply range designed with wide operating
temperature ranges. These enclosed power supplies comply with EN61000-3-2 Class A and are approved to UL,
cUL, CB and TUV EN60950-1:2006.
Page 69
Avanti Power Repairs Ltd
SPS-100P-ID Series - 100W Dual Isolated Output Enclosed Power Supply
Applications
Programmable logic controllers
Automatic controls
Industrial controls
Test equipment
Motor-Based machinery
Features
Universal AC input, PFC function
Isolated outputs
±10% output voltage adjustment on output 1 of SPS-100PID5/ID6 models
Built-in EMI filter, low ripple noise
Over load, over voltage & short circuit protection
100% full load burn-in test
-20°C to +70°C operating temperature
Power ON with LED indicator
UL, cUL, TUV, CB, CE certified
Model No
SPS-100P-ID1
SPS-100P-ID2
SPS-100P-ID5
SPS-100P-ID6
Voltage (Max)
5V
12V
5V
24V
12V
5V
24V
5V
Current (Amps)
12A
7A
12A
4A
8A
3A
4A
3A
Power (Watts)
100W
100W
100W
100W
R&N (mV)
70mV
120mV
70mV
240mV
120mV
70mV
240mV
70mV
Efficiency (%)
81%
82%
82%
83%
Description
SPS-100P-ID is a range of dual isolated output enclosed power supplies with power factor correction. Featuring
wide operating temperatures from -20°C to +70°C and high efficiency up to 83% these enclosed power supplies are
highly reliable.
Page 70
Avanti Power Repairs Ltd
SPS-100P-IT Series - 100W Triple Isolated Output AC/DC PFC Enclosed Power Supply
Applications
Programmable logic controller
Automatic control
Industrial control
Test equipment
Features
All outputs are isolated
Outputs two & three have polarity option
Power on LED indicator
Built in EMI filter
Low ripple noise
Over voltage protection
Over load & short circuit protection
100% full load burn-in test
-20°C to +70°C operating temperature
UL, cUL, TUV, CB, CE Approved
Model No
SPS-100P-IT1
SPS-100P-IT2
SPS-100P-IT3
SPS-100P-IT4
Voltage (Max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
12V
24V
Current (Amps)
12A
5A
2A
12A
5A
2A
12A
4A
2A
12A
4A
2A
Power (Watts)
100W
100W
100W
100W
R&N (mV)
70mV
120mV
100mV
70mV
120mV
150mV
70mV
150mV
200mV
70mV
120mV
240mV
Efficiency (%)
78%
78%
78%
78%
Description
SPS-100P-IT Series are a range of triple output enclosed switch mode power supply with PFC function and isolated
outputs. These enclosed power supplies have a wide operation range of -20°C to +70°C, have built in EMI filter and
over voltage, over load and short circuit protections.
Page 71
Avanti Power Repairs Ltd
SPS-100PT Series - 100W Triple Output PFC Function Power Supply
Features
Universal AC input
PFC Function (option)
Built-in EMI filter
Low ripple noise
Over voltage, over load protection
Short circuit shut down & auto recovery
100% 50° burn-in test
UL, cUL, TUV, CB, CE approved
Model No
SPS-100-PT1
SPS-100-PT2
SPS-100-PT3
SPS-100-PT4
Voltage (Max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
12V
24V
Current (Amps)
12A
5A
2A
12A
5A
2A
12A
3A
2A
12A
3A
2A
Page 72
Power (Watts)
100W
100W
100W
100W
R&N (mV)
50mV
120mV
100mV
50mV
120mV
150mV
50mV
150mV
200mV
50mV
120mV
240mV
Efficiency (%)
73%
74%
75%
75%
Avanti Power Repairs Ltd
TP-100 Series - 100W Triple Output PFC Function Power Supply
Applications
General electronic equipment
Factory automation
Instrumentation
Moving signs
Telecommunications
Data communications
Features
Universal AC input/Full range
Built-in active PFC function, PF>0.94
Protections: Short circuit/Overload/Over voltage
Free air cooling convection
Fixed switching frequency at 100KHz
Model No
TP-100A
TP-100B
TP-100C
TP-100D
Voltage (Max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
Current (Amps)
10A
4A
1A
10A
4A
1A
10A
3A
1A
10A
2A
1A
Power (Watts)
101W
105.2W
104W
105.2W
R&N (mV)
100mV
120mV
100mV
100mV
120mV
100mV
100mV
150mV
100mV
100mV
150mV
100mV
Efficiency (%)
75%
78%
77%
78%
Description
The TP-100 Series is a 100W triple output enclosed power supply with PFC function. Protections including short
circuit, overload and over voltage. Cooling by free air convection allows an operating temperature -10~+60°C. With
a fixed switching frequency at 100KHz enabling designs to avoid interference with system clock frequencies.
Page 73
Avanti Power Repairs Ltd
SPS-100-T Series - 100W Triple Output Power Supply
Features
Universal AC input, PFC function (option)
Built-in EMI filter, low ripple noise
Over load, over voltage & short circuit protection
100% 50° burn=in test
UL, cUL, TUV, CB, CE approved
Model No
SPS-100-T1
SPS-100-T2
SPS-100-T3
SPS-100-T4
Voltage (Max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
12V
24V
Current (Amps)
12A
5A
2A
12A
3A
2A
12A
3A
2A
12A
3A
2A
Page 74
Power (Watts)
100W
100W
100W
100W
R&N (mV)
50mV
120mV
100mV
50mV
120mV
150mV
50mV
150mV
200mV
50mV
120mV
240mV
Efficiency (%)
73%
74%
75%
75%
Avanti Power Repairs Ltd
SPS-100P-Q Series - 100W Quad Output AC/DC Enclosed Power Supply with PFC
Applications
Programmable logic controller
Automatic control
Industrial control
Test equipment
Features
Universal full range input
Power ON with LED indicator
Built-in EMI filter, low ripple noise
Over voltage, Over load, short circuit protection
100% full load burn-in test
-20°C to 70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-100P-Q1
SPS-100P-Q2
SPS-100P-Q3
Voltage (Max)
5V
12V
-5V
-12V
5V
15V
-5V
-15V
5V
12V
-12V
24V
Current (Amps)
12A
5A
1A
1A
12A
5A
1A
1A
12A
5A
1A
2A
Power (Watts)
100W
100W
100W
R&N (mV)
70mV
120mV
100mV
150mV
70mV
150mV
100mV
200mV
70mV
120mV
150mV
240mV
Efficiency (%)
77%
77%
78%
Description
SPS-100P-Q Series are 100W Quad output AC/DC enclosed power supplies with PFC function. This enclosed
power supply range has wide operating temperatures from -20C to +70C, Built-in EMI filter and Over voltage, Over
load and short circuit protection.
Page 75
Avanti Power Repairs Ltd
SPU-100-Q Series - 100W Quad Output U-Bracket Power Supply
Features
Universal full range AC 90 ~ 364V
Light weight, compact size
Built-in EMI filter, low ripple noise
100% 50° burn-in test
High efficiency, high reliability
UL/CSA/TUV/CE standard
Model No
SPU-100-Q1
Voltage (Max)
5V
12V
-5V
-12V
Current (Amps)
12A
4A
0.5A
Page 76
Power (Watts)
100W
R&N (mV)
60mV
100mV
150mV
240mV
Efficiency (%)
72%
Avanti Power Repairs Ltd
SPS-G100-Q Series - 100W Quad Output AC/DC Enclosed Switch Mode Power Supply
Applications
Automatic control systems
Programmable logic controllers
Test equipment
Features
Universal full range input
Power on with LED indicator
Built in EMI filter, low ripple noise
Over voltage protection - Shutdown and latch off
Over load & short circuit protections - Hiccup mode
100% full load burn-in test
-20°C ~ +70°C operating temperature
UL, cUL, TUV, CB, CE approved
Model No
SPS-G100-Q1
SPS-G100-Q3
SPS-G100-Q4
Voltage (Max)
5V
12V
-12V
-5V
5V
24V
12V
-12V
5V
15V
24V
-15V
Current (Amps)
10A
4A
1A
1A
10A
4A
2A
1A
10A
4A
2A
1A
Power (Watts)
85W
88W
88W
R&N (mV)
80mV
120mV
100mV
100mV
80mV
200mV
120mV
100mV
80mV
150mV
200mV
100mV
Efficiency (%)
76%
77%
78%
Description
SPS-G100-Q Series is a quad output enclosed power supply range designed with wide operating temperature
ranges. These enclosed power supplies comply with EN61000-3-2 Class A and are approved to UL, cUL, CB and
TUV EN60950-1:2006.
Page 77
Avanti Power Repairs Ltd
QP-100 Series - 100W Quad Output PFC Function Power Supply
Applications
General electronic machinery
Factory automation
Instrumentation
Moving signs
Telecommunications
Data communications
Features
Universal AC input
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage protections
Free air cooling convection
Output 4: ± Polarity is selectable
Fixed switching frequency at 100KHz
Model No
QP-100D
QP-100F
QP-100-3A
QP-100-3B
QP-100-3C
QP-100-3D
Voltage (Max)
5V
12V
24V
-12V
5V
15V
24V
-15V
5V
3.3V
12V
-5V
5V
3.3V
12V
-12V
5V
3.3V
15V
-15V
5V
3.3V
24V
-12V
Current (Amps)
8A
2.4A
1A
1A
8A
2A
1A
1A
8A
8A
2.5A
1A
8A
8A
2.2A
1A
8A
8A
2A
1A
8A
8A
1.3A
1A
Power (Watts)
100W
103W
99.4W
100W
101W
105W
R&N (mV)
120mV
150mV
200mV
150mV
120mV
180mV
200mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
Efficiency (%)
78%
78%
74%
74%
75%
75%
Description
The QP-100 series is a 100W quad output enclosed power supply with PFC function. Protections including short
circuit, overload and over voltage. Cooling by free air convection allows an operating temperature of -10~+60°C.
With a fixed switching frequency of 100KHz enabling designs to avoid interference with system clock frequencies.
Page 78
Avanti Power Repairs Ltd
SPS-100-Q Series - 100W Quad Output PFC Function Power Supply
Features
Universal input
Built-in EMI filter
Low ripple noise
100% 50°C burn in test
Over voltage, over load protection
Short circuit shut down & auto recovery
Model No
SPS-100-Q1
SPS-100-Q2
SPS-100-Q3
Voltage (Max)
5V
12V
-5V
-12V
5V
15V
-5V
-15V
5V
12V
-12V
24V
Current (Amps)
12A
5A
1A
1A
12A
5A
1A
1A
12A
5A
1A
2A
Page 79
Power (Watts)
100W
100W
100W
R&N (mV)
50mV
120mV
100mV
240mV
50mV
150mV
100mV
300mV
50mV
120mV
240mV
240mV
Efficiency (%)
72%
73%
73%
Avanti Power Repairs Ltd
MWP-602(A) Series - 104W AC-DC Triple Output for Video Game
Features
Low cost, high reliability
105°C Output capacitor
Internal AC input range
Built in EMI filter, low ripple noise
High efficiency, low working temperature
Soft-start circuit, limiting as surge current
Short circuit, overload protected
Compact size, light weight
100% full load burn-in test
Output voltage correction LED
Model No
MWP-602-MWP-602A
Voltage (Max) Current (Amps)
5V
15A
12V
2A
-5V
1A
Page 80
Power (Watts)
104W
R&N (mV) Efficiency (%)
50mV
75%
120mV
60mV
Avanti Power Repairs Ltd
MWP-606(A) Series - 104W AC-DC Triple Output for Video Game
Features
Low cost, high reliability
105°C Output capacitor
Internal AC input range
Built in EMI filter, low ripple noise
High efficiency, low working temperature
Soft-start circuit, limiting as surge current
Short circuit, overload protected
Compact size, light weight
100% full load burn-in test
Output voltage correction LED
Model No
MWP-606-MWP-606A
Voltage (Max)
5V
12V
-5V
Current (Amps)
15A
2A
1A
Page 81
Power (Watts)
104W
R&N (mV) Efficiency (%)
50mV
75%
120mV
60mV
Avanti Power Repairs Ltd
MWP-608 - 104W AC-DC Triple Output for Video Game
Features
Universal AC input/Full range
Protections: Short circuit / overload
Cooling by free air convection
Model No
MWP-608
Voltage (Max)
5V
12V
24V
Specifications
Input voltage range
Frequency range
AC current
Inrush current
Leakage current
DC output power
Efficiency
Setup, rise, hold up time
Overload protection
Operating display
Working temp
Working humidity
Storage temp., humidity
Temp. coefficient
Vibration
MTBF
Safety standards
Current (Amps)
10A
2A
1.25A
Power (Watts)
104W
R&N (mV)
50mV
120mV
150mV
Efficiency (%)
80%
88~132VAC / 176~264VAC selected by switch 47~63Hz
47 ~ 63Hz
2.8A/115V 1.7A/230V
Cold start 20A/115V 40A/230V
<3.5mA/240VAC
104W
80%
200ms, 50ms, 16ms at full load
150 ~ 200% rated output power (CH1:19.2 ~ 29.2)
Protection type: Fold back current limiting, recovers automatically after fault
condition is removed
Double colour LED correct range: Green (5~5.4Vref.) Wrong range: Red
-10°C~+60°C
20% ~ 90% RH non condensing
-20°C~+85°C, 5% ~ 95% RH
±0.05% / °C (0~50°C) on +5V output
10 ~ 500Hz, 2G 10 min. /1 cycle, period for 60 min. each along X,Y,Z axes
267K hrs min. MIL-HDBK-217F (25°C)
TUV EN60950-1 Approved
Page 82
Avanti Power Repairs Ltd
SPS-110 Series - 110W AC-DC Single Output Enclosed Power Supply
Features
85V ~ 132 V or 170V ~ 264V Selected by switch
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
Non min load requirement
100% 50°C burn-in test
Meets UL, cUL, TUV, ,CB, CE standard
Model No
SPS-110-3-3
SPS-110-05
SPS-110-7-5
SPS-110-10
SPS-110-12
SPS-110-15
SPS-110-18
SPS-110-24
SPS-110-28
SPS-110-48
Voltage (Max)
3.3V
5V
8V
10V
12V
15V
18V
24V
28V
48V
Current (Amps)
25A
22A
15A
11A
9.2A
8A
6.2A
5A
4A
2.3A
Page 83
Power (Watts)
110W
110W
110W
110W
110W
110W
110W
110W
110W
110W
R&N (mV)
50mV
50mV
100mV
100mV
120mV
150mV
180mV
240mV
280mV
480mV
Efficiency (%)
70%
75%
75%
76%
78%
79%
79%
80%
80%
81%
Avanti Power Repairs Ltd
SPS-120P Series - 120W Single Output AC-DC Enclosed Power Supply
Features
Universal AC input with active power factor correction,
P.F.>0.95
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Over temperature protection (Optional)
Output voltage ±10% adjustment
Remote Control ON/OFF (Optional)
Non min load requirement
100% 50°C burn-in test
UL, cUL, TUV, ,CB, CE pending
Model No
SPS-120P-3-3
SPS-120P-05
SPS-120P-7-5
SPS-120P-12
SPS-120P-15
SPS-120P-24
SPS-120P-30
SPS-120P-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
30V
48V
Current (Amps)
25A
20A
16A
10A
8A
5A
4A
2.5A
Page 84
Power (Watts)
120W
120W
120W
120W
120W
120W
120W
120W
R&N (mV)
50mV
70mV
80mV
100mV
120mV
150mV
180mV
250mV
Efficiency (%)
69%
75%
77%
80%
80%
81%
81%
81%
Avanti Power Repairs Ltd
RD-125 Series - 125W Dual Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
UL, cUL, TUV, CE & CB approvals
Model No
RD-125A
RD-125B
RD-125-1224
RD-125-1248
RD-125-2448
RD-125-2412
RD-125-4812
RD-125-4824
Voltage (Max)
5V
12V
5V
24V
12V
24V
12V
48V
24V
48V
24V
12V
48V
12V
48V
24V
Current (Amps)
8A
8A
5A
5A
4A
4A
2.3A
2.3A
2A
2A
4A
4A
2.3A
2.3A
2A
2A
Power (Watts)
131W
133.4W
133.2W
138W
144W
133.2W
138W
144W
R&N (mV)
80mV
120mV
80mV
120mV
120mV
200mV
120mV
240mV
200mV
240mV
200mV
120mV
240mV
120mV
240mV
240mV
Efficiency (%)
82%
85%
85%
86%
86%
85%
86%
86%
Description
A highly efficient and reliable enclosed power supply, with a high operating temperature of -25~+70°C and cooling
by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations. Overload, short
circuit and over voltage protection with hiccup mode (recovering automatically after fault condition is removed).
Page 85
Avanti Power Repairs Ltd
RID125 Series - 125W Dual Isolated Output Enclosed Power Supply
Applications
Motor-based machinery
Automation equipment
Test equipment
POS systems
Franking machines
Banking machines
Printers/plotters
Features
Isolated output & GND for CH1,CH2
AC input range selectable by switch
Short circuit, over load, over voltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High reliability
Model No
RID-125-1224
RID-125-2448
RID-125-1248
Voltage (Max)
12V
24V
24V
48V
12V
48V
Current (Amps)
4A
4A
2A
2A
2.3A
2.3A
Power (Watts)
133.2W
144W
138W
R&N (mV)
120mV
200mV
200mV
240mV
120mV
240mV
Efficiency (%)
85%
86%
85%
Description
AC/DC switching power supplies that can provide 125W using air convection. The units can withstand 300VAC
input surge for 5 seconds and 5G vibration that is suitable to be operated in harsh environment. Possessing 12V or
24V main output channel (CH1) with up to 180% of high peak load capability the isolated design between CH1 and
CH2 can significantly prevent noise sourcing from the motor action from entering control circuits and hence secure
the accurate operation of the end equipment. Other standard functions include short circuit, overload, and over
voltage protections.
Page 86
Avanti Power Repairs Ltd
RT-125 Series - 125W Triple Output AC-DC Switching Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Protections: Short circuit, Overload, Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 seconds
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RT-125A
RT-125B
RT-125C
RT-125D
Voltage (Max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
Current (Amps)
12A
6A
1A
12A
5A
1A
10A
4.5A
1A
8A
3A
2A
Power (Watts)
131W
132W
132.5W
136W
R&N (mV)
80mV
120mV
80mV
80mV
120mV
120mV
80mV
150mV
150mV
80mV
150mV
120mV
Efficiency (%)
79%
80%
81%
82%
Description
A highly efficient and reliable triple output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode (recovering automatically after fault condition
is removed).
Page 87
Avanti Power Repairs Ltd
RQ-125 Series - 125W Quad Output AC-DC Enclosed Power Supply
Applications
General electronic machinery or equipment
Automation
Test equipment
Features
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RQ-125B
RQ-125C
RQ-125D
Voltage (Max)
5V
12V
-5V
-12V
5V
15V
-5V
-15V
5V
12V
24V
-12V
Current (Amps)
11A
4.5A
1A
0.5A
10A
4A
1A
0.5A
8A
2.5A
2A
0.5A
Power (Watts)
120W
120W
120W
120W
122.5W
122.5W
122.5W
122.5W
124W
124W
124W
124W
R&N (mV)
80mV
120mV
80mV
80mV
80mV
120mV
80mV
80mV
80mV
120mV
150mV
80mV
Efficiency (%)
79%
80%
82%
Description
A highly efficient and reliable quad output enclosed power supply, with a high operating temperature of -25~+70°C
and cooling by free air convection. Built to withstand 300VAC surge input for 5 seconds and 5G vibrations.
Overload, short circuit and over voltage protection with hiccup mode(recovering automatically after fault condition
is removed)
Page 88
Avanti Power Repairs Ltd
HRPG-150 Series - 150W Single Output & 5Vsb AC-DC PFC Power Supply
Applications
General electronics
Factory automation
Moving signs
Test and measurement equipment
Features
Universal AC input
Built-in active PFC function, PF>0.95
High efficiency up to 88% (typ.)
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in ON-OFF control
Built-in remote sense function
Stand by 5V@0.3A
No load power consumption <0.5A
Model No
HRPG-150-3-3
HRPG-150-5
HRPG-150-7-5
HRPG-150-12
HRPG-150-15
HRPG-150-24
HRPG-150-36
HRPG-150-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (Amps)
30A
26A
20A
13A
10A
6.5A
4.3A
3.3A
Power (Watts)
99W
130W
150W
156W
150W
156W
155W
158.4W
R&N (mV)
80mV
80mV
100mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
80%
84%
86%
87%
87%
87%
88%
88%
Description
HRPG-150 Series are 150W AC/DC miniature enclosed type power supplies with PFC function that fulfil the
requirement of EN61000-3-2 for harmonic current with remote ON/OFF control and 5V/0.3A standby output to
achieve no load power consumption <0.5W. Other standard functions of HRPG-150 include 300VAC input surge
immunity for 5 seconds, remote sense, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and
protection for short-circuit, overload (constant current limiting), over voltage, and over temperature.
Page 89
Avanti Power Repairs Ltd
SC-150 Series - 150W Constant Current Single Output Switching PSU
Applications
Charger for lead acid batteries
Features
AC input selected by switch
Short circuit, over load, over voltage protections
Built in constant current limiting circuit
Built in temperature compensation circuit
Alarm signal output option
Approvals: UL/ TUV/ CE
Fixed switching frequency at 25KHz
Model No
SC-150-13-5
SC-150-27
SC-150-54
Voltage (Max)
14V
27V
54V
Current (Amps)
11.2A
6A
3A
Page 90
Power (Watts)
151.2W
151.2W
151.2W
R&N (mV)
180mV
240mV
240mV
Efficiency (%)
83%
86%
86%
Avanti Power Repairs Ltd
HRP-150 Series - 150W Single Output AC-DC Power Supply with PFC
Applications
General electronics
Factory automation
Moving signs
Test and measurement equipment
Features
Universal AC input
Built-in active PFC function, PF>0.95
High efficiency up to 89% (typ.)
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in remote sense function
Model No
HRP-150-3-3
HRP-150-5
HRP-150-7-5
HRP-150-12
HRP-150-15
HRP-150-24
HRP-150-36
HRP-150-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (Amps)
30A
26A
20A
13A
10A
6.5A
4.3A
3.3A
Power (Watts)
99W
130W
150W
156W
150W
156W
155W
158.4W
R&N (mV)
80mV
80mV
100mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
80%
85%
87%
88%
88%
88%
89%
89%
Description
HRP-150 Series are 150W AC/DC miniature enclosed type power supplies with PFC function that fulfil the
requirement of EN61000-3-2 for harmonic current with high operating efficiency and low no load power
consumption. Standard functions of HRP-150 include 300VAC input surge immunity for 5 seconds, remote sense,
LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and protection for short-circuit, overload
(constant current limiting), over voltage, and over temperature.
Page 91
Avanti Power Repairs Ltd
RS-150 Series - 150W Single Output AC-DC Enclosed Power Supply
Applications
Security systems
Communication systems
Lit Displays
LED Displays
LED Lighting
Test & measurement equipment
Features
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
Short circuit, over load, over voltage protections
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
Model No
RS-150-3-3
RS-150-5
RS-150-12
RS-150-15
RS-150-24
RS-150-48
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
30A
26A
12.5A
10A
6.5A
3.3A
Power (Watts)
99W
130W
150W
150W
156W
158.4W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Efficiency (%)
74%
78%
83%
84%
86%
87%
Description
RS-150 Series is a single output enclosed AC-DC power supply, with cooling by free air convection the power
supply has a working temperature of -25~+70°C. Withstanding 300VAC surge input for 5 seconds.
Page 92
Avanti Power Repairs Ltd
SPS-S150 Series - 150W Single Output AC-DC Enclosed Power Supply
Features
Power ON with LED indicator
Built-in EMI filter, low ripple noise
Over load, over voltage protection
Short circuit shutdown and Auto recovery
Output ±10% adjustment
Non min. load requirement
100% 50° burn-in test
UL, cUL, CB, CE pending
Model No
SPS-S150-05
SPS-S150-7-5
SPS-S150-12
SPS-S150-15
SPS-S150-24
SPS-S150-36
Voltage (Max)
5V
8V
12V
15V
24V
36V
Current (Amps)
26A
17.4A
12.5A
10A
6.5A
4.4A
Page 93
Power (Watts)
130W
150W
150W
150W
156W
158.4W
R&N (mV)
80mV
80mV
120mV
120mV
120mV
200mV
Efficiency (%)
78%
83%
83%
84%
86%
86%
Avanti Power Repairs Ltd
SPV-150 Series - 150W Single Output Enclosed Power Supply
Applications
LCD panel burn-in systems
IC testing equipment
Factory automation
Mechanical and electrical industry
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage, over temperature
protections
Fixed switching frequency at 100KHz
Output voltage programmable from 20~110% by
1~5.5VDC external control signal
Model No
SPV-150-12
SPV-150-24
SPV-150-48
Voltage (Max)
12V
24V
48V
Current (Amps)
12.5A
6.25A
3.125A
Power (Watts)
150W
150W
150W
R&N (mV)
150mV
150mV
240mV
Efficiency (%)
82%
83%
83%
Description
SPV-150 Series are a programmable output 150W single output enclosed power supply range with efficiency up to
83% and built in active PFC >0.94. These enclosed power supplies also have remote on/off control and full
protections.
Page 94
Avanti Power Repairs Ltd
SP-150 Series - 150W Single Output PFC Function Power Supply
Applications
General electronic equipment
Automation
Test equipment
Features
Universal full range AC input
Built-in active PFC function, PF>0.93
Short circuit, over load, over voltage, over temperature
protections
Built-in constant current limiting circuit
Remote ON-OFF control(Optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
Model No
SP-150-3-3
SP-150-5
SP-150-7-5
SP-150-12
SP-150-13-5
SP-150-15
SP-150-24
SP-150-27
SP-150-48
Voltage (Max)
3.3V
5V
8V
12V
14V
15V
24V
27V
48V
Current (Amps)
30A
30A
20A
12.5A
11.2A
10A
6.3A
6A
3.2A
Power (Watts)
99W
150W
150W
150W
151.2W
150W
150W
151.2W
154W
R&N (mV)
100mV
100mV
100mV
100mV
100mV
100mV
150mV
150mV
250mV
Efficiency (%)
73%
79%
81%
84%
84%
83.5%
85%
86%
85%
Description
The SP-150 Series is a 150W single output switching power supply with PFC function. Protections including short
circuit, over load, over voltage and over temperature. Cooling by free air convection allowing an operating
temperature of -10~+60°C. With a fixed switching frequency at PFC: 67KHz, PWM: 134KHz enabling designs to
avoid interference with system clock frequencies.
Page 95
Avanti Power Repairs Ltd
RSP-150 Series - 150W 1U Single Output Enclosed Power Supplies
Applications
Industrial automation systems
Mechanical & electrical equipment
Instrumentation
Household appliances
Applications requiring a low profile installation
Features
Universal AC input/full range
Built-in active PFC function
Short circuit, over load, over voltage, over temperature
protections
Built-in constant current limiting circuitry
Cooling by free air convection
1U low profile 30mm
Remote On-Off Control
LED indicator for power on
Model No
RSP-150-3-3
RSP-150-5
RSP-150-7-5
RSP-150-12
RSP-150-13-5
RSP-150-15
RSP-150-24
RSP-150-27
RSP-150-48
Voltage (Max)
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
48V
Current (Amps)
30A
30A
20A
12.5A
11.2A
10A
6.3A
5.6A
3.2A
Power (Watts)
99W
150W
150W
150W
151.2W
150W
151.2W
151.2W
153.6W
R&N (mV)
100mV
100mV
100mV
100mV
100mV
100mV
150mV
150mV
250mV
Efficiency (%)
81.5%
87%
88.5%
90%
87.5%
88.5%
89%
89.5%
90%
Description
RSP-150 Series offers 150W of output power in a 1U low profile 30mm enclosure. These enclosed power supplies
feature high efficiency and free air convection cooling
Page 96
Avanti Power Repairs Ltd
USP-150 - 150W U-Bracket Single Output with PFC Function
Applications
General electronic equipment
Low profile applications
Embedded power solutions
Features
Universal AC input/ Full range (Up to 295 VAC)
Built in active PFC compliance
Constant Voltage design
High efficiency up to 93%
Protections: Short circuit/ Overload/ Over voltage/ Over
temperature
Cooling by free air convection
U-bracket low profile: 33mm
ZVS technology to reduce power dissipation
Model No
USP-150-12
USP-150-15
USP-150-24
USP-150-36
USP-150-48
Voltage (Max)
12V
15V
24V
36V
48V
Current (Amps)
12.5A
10A
6.3A
4.2A
3.2A
Power (Watts)
150W
150W
151.2W
151.2W
154W
R&N (mV)
100mV
150mV
150mV
250mV
250mV
Efficiency (%)
92%
92%
93%
93%
93%
Description
The USP-150 Series is a single output U-bracket power supply with PFC function. A highly efficient power supply
at 93%, protections including, short circuit, overload, over voltage and over temperature. Cooling by free air
convection allows an operating temperature of -30~+65°C.
Page 97
Avanti Power Repairs Ltd
SPU-150-D Series - 150W Dual Output AC-DC Enclosed Power Supply
Features
AC 90~132 V / 180~264V auto sensing
High efficiency, high reliability
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
100% 50℃ burn-in test
Meet UL, cUL, TUV, CB, CE standard
Model No
SPU-150-D1
SPU-150-D2
SPU-150-D3
Voltage (Max)
8V
5V
12V
5V
24V
5V
Current (Amps)
18A
3A
12A
3A
6A
3A
Page 98
Power (Watts)
150W
150W
150W
R&N (mV)
80mV
50mV
120mV
50mV
240mV
50mV
Efficiency (%)
73%
75%
76%
Avanti Power Repairs Ltd
SPU-150-Q Series - 150W Quad Output Power Supply
Features
Auto sensing AC input
High efficiency
Light weight, compact size
Built-in EMI filter, low ripple noise
100% 50° burn-in test
UL, cUL, TUV, CB, CE Standard
Model No
SPU-150-Q1
SPU-150-Q2
SPU-150-Q3
SPU-150-Q4
Voltage (Max)
5V
12V
-12V
-5V
5V
15V
-15V
-5V
5V
12V
-12V
24V
5V
15V
-15V
-5V
Current (Amps)
25A
10A
2A
1A
20A
8A
2A
1A
20A
8A
2A
2A
20A
4A
2A
1A
Page 99
Power (Watts)
150W
150W
150W
150W
R&N (mV)
50mV
150mV
240mV
100mV
50mV
150mV
150mV
100mV
50mV
150mV
240mV
240mV
50mV
150mV
300mV
100mV
Efficiency (%)
72%
75%
72%
72%
Avanti Power Repairs Ltd
QP-150 B,C Series - 150W Quad Output PFC Function Power Supply
Applications
Factory automation
Instrumentation
Moving Signs
Telecommunications
Data communications
Features
Universal AC input
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage protections
Forced air cooling by built-in DC fan
Fixed switching frequency at 100KHz
Model No
QP-150B
QP-150C
Voltage (Max)
5V
12V
-12V
-5V
5V
15V
-15V
-5V
Current (Amps)
15A
4A
2A
1A
15A
3A
2A
1A
Power (Watts)
150W
153W
R&N (mV)
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
Efficiency (%)
76%
77%
Description
The QP-150B, C Series is a quad output enclosed power supply with PFC function. Protections including short
circuit, overload and over voltage. Forced air cooling by built-in DC fan allows an operating temperature of 10~+60°C. With a fixed switching frequency at 100KHz enabling designs to avoid interference with system clock
frequencies.
Page 100
Avanti Power Repairs Ltd
QP-150 Series - 150W Quad Output PFC Function Power Supply
Applications
Factory automation
Instrumentation
Moving signs
Telecommunications
Data communications
Features
Universal AC input
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage protections
Forced air cooling by built-in DC fan
Output: 4±Polarity is selectable
Fixed switching frequency at 100KHz
Model No
QP-150D
QP-150F
QP-150-3A
QP-150-3B
QP-150-3C
QP-150-3D
Voltage (Max)
5V
12V
24V
-12V
5V
15V
24V
-15V
5V
3.3V
12V
-5V
5V
3.3V
12V
-12V
5V
3.3V
15V
-15V
5V
3.3V
24V
-12V
Current (Amps)
10A
4A
2A
1A
10A
3A
2A
1A
10A
10A
5A
1A
10A
10A
5A
1A
10A
10A
4A
1A
10A
10A
2.5A
1A
Power (Watts)
150.2W
152W
146W
150.2W
152W
150.2W
R&N (mV)
120mV
150mV
200mV
150mV
120mV
150mV
200mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
Efficiency (%)
78%
78%
73%
75%
74%
Description
The QP-150 Series is a quad output enclosed power supply with PFC function. Protections including short circuit,
overload and over voltage. Forced air cooling by built-in DC fan allows an operating temperature of -10~+60°C.
With a fixed switching frequency at 100KHz enabling designs to avoid interference with system clock frequencies.
Page 101
Avanti Power Repairs Ltd
TP-150 Series - 150W AC-DC Triple Output PFC Function Power Supply
Applications
General electronic equipment
Factory automation
Instrumentation
Moving Sign
Telecommunications
Data communications
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.94
Protections: Short circuit/Over load/Over voltage
Forced air cooling by built-in DC fan
Fixed switching frequency at 100KHz(Optional)
Model No
TP-150A
TP-150B
TP-150C
TP-150D
Voltage (Max)
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
Current (Amps)
15A
6A
1A
15A
6A
1A
15A
4.5A
1A
15A
3A
1A
Power (Watts)
150W
148.2W
152W
154.2W
R&N (mV)
100mV
120mV
100mV
100mV
120mV
100mV
100mV
150mV
100mV
100mV
150mV
100mV
Efficiency (%)
75%
77%
77%
78%
Description
The TP-150 series is an AC-DC triple output enclosed power supply with PFC function. Forced air cooling by builtin DC fan allows an operating temperature of -10~+60°C. With a fixed switching frequency at 100KHz enabling
designs to avoid interference with system clock frequencies (Optional).
Page 102
Avanti Power Repairs Ltd
SPS-151P Series - 150W Single Output AC-DC Enclosed Power Supply
Features
Universal AC input with active power factor correction,
P.F.>0.95
Built in EMI filter, low ripple noise
Over load, over voltage & short circuit protection
Over temperature protection (optional)
Output voltage ±10% adjustment
Remote Control ON/OFF (optional)
Non min. load requirement
100% 50°C burn-in test
UL, cUL, TUV, ,CB, CE approved
Model No
SPS-151P-3-3
SPS-151P-05
SPS-151P-7-5
SPS-151P-12
SPS-151P-15
SPS-151P-24
SPS-151P-27
SPS-151P-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
27V
48V
Current (Amps)
30A
30A
20A
12.5A
10A
6.3A
6A
3.2A
Page 103
Power (Watts)
100W
150W
150W
150W
150W
150W
150W
150W
R&N (mV)
50mV
70mV
80mV
100mV
120mV
150mV
180mV
250mV
Efficiency (%)
69%
75%
70%
80%
80%
83%
84%
84%
Avanti Power Repairs Ltd
AD-155 Series - 155W Single Output With Battery Charger
Features
Low cost, high reliability
105°C output capacitor
International AC input range
High efficiency, low working temperature
Soft-start circuit, limiting AC surge current
Short circuit, over load and over voltage protection
100% full load burn-in test
Built in EMI filter, low ripple & noise
Model No
AD-155A
AD-155B
AD-155C
Voltage (Max)
14V
13.3V
28V
27.1V
54V
54V
Current (Amps)
10.5A
0.5A
5A
0.5A
3A
0.2A
Page 104
Power (Watts)
152W
R&N (mV)
150mV
Efficiency (%)
80%
152W
150mV
84%
156.5W
240mV
84%
Avanti Power Repairs Ltd
ADD-155 Series - 155W Dual Output AC-DC Power Supply With Battery C
Features
Universal AC input / Full range
Built-in active PFC function, PF>95
Short circuit/Over load/Over voltage Protection
Battery low/battery polarity protections
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at PFC 67KHz, PWM 134KHz
UPS Function
Model No
ADD-155A
ADD-155B
ADD-155C
Voltage (Max)
14V
5V
13.3V
28V
5V
27.1V
54V
5V
54V
Current (Amps)
10A
3A
0.5A
4.5A
3A
0.5A
2.3A
3A
0.2A
Page 105
Power (Watts)
153W
R&N (mV)
150mV
100mV
Efficiency (%)
78%
153W
200mV
100mV
81%
150W
240mV
100mV
81%
Avanti Power Repairs Ltd
PSC-160-C Series 160W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger
Applications
Security systems
Access control systems
Emergency lighting systems
Alarm systems
UPS systems
Central monitoring systems
Features
90-264VAC Universal AC input
L-bracket base and cover to enclose
Built-in Active PFC function
Short circuit, over load, over voltage protections
Battery low protection / Battery polarity protection by fuse
Relay contact signal output for AC OK and Battery low
Cooling by free air convection
100% full load burn-in test
6"x3" compact size
Model No
PSC-160A-C
PSC-160B-C
Voltage (Max)
13.8V
13.8V
27.6V
27.6V
Current (Amps)
7.6A
4A
3.8A
2A
Power (Watts)
160W
160W
R&N (mV)
150mV
240mV
Efficiency (%)
88%
90%
Description
PSC-160-C Series is our standard 160W AC/DC PCB type security power supply, with 6”x3” footprint, but
fitted with an l-bracket and cover to encase the unit. The power supply has a universal input range between 90VAC
and 264VAC and incorporates a built-in PFC function. In addition to the primary output there is a charger output
that provides the backup power supply application required by access and security systems. PSC-160-C Series still
delivers up to 90% high efficiency and can operate with air convection at temperatures of -30C through to 70C. This
series is designed with thorough alarm features, including AC OK and battery low signalling; there is also a relay
contact provided to facilitate user system design.
Page 106
Avanti Power Repairs Ltd
SPS-170P - 170W Single Output AC-DC Enclosed Power Supply
Features
AC input 88V ~ 132V or 175V ~264V selected by switch
Built-in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
100% 50°C burn-in test
Meet UL, cUL, TUV ,CB, CE standard
Model No
SPS-170P-3-3
SPS-170P-05
SPS-170P-7-5
SPS-170P-12
SPS-170P-15
SPS-170P-24
SPS-170P-28
SPS-170P-48
Voltage (Max)
5V
5V
8V
12V
15V
24V
28V
48V
Current (Amps)
30A
30A
21A
14.2A
11.4A
7.1A
6.1A
4A
Page 107
Power (Watts)
99W
150W
158W
170W
170W
170W
170W
170W
R&N (mV)
50mV
30mV
100mV
100mV
120mV
240mV
240mV
240mV
Efficiency (%)
69%
75%
77%
80%
80%
83%
84%
84%
Avanti Power Repairs Ltd
HDP-190 - 190W Dual Output Enclosed LED Power Supply with PFC Function
Features
Universal AC input/full range
Built-in active PFC function, PF≥0.94
High efficiency up to 86%
Protections: Short circuit/Overload/Over Voltage/Over
Temperature
Cooling by free air convection
1U low profile 36mm
Conformal coated
ZVS technology to reduce power dissipation
Model No
HDP-190
Voltage (Max)
5V
Current (Amps)
20A
Page 108
Power (Watts)
100W
R&N (mV)
100mV
Efficiency (%)
86%
Avanti Power Repairs Ltd
RSP-200 Series - 200W Single Output Enclosed Power Supply with PFC
Applications
Industrial control systems
Instruments
LED displays
Applications requiring a low profile installation
Features
Universal AC input/full range
Built-in active PFC function, PF>0.95
Protections: Short circuit/Overload/Over voltage/Over
temperature
Cooling by free air convection
1U low profile 30mm
Optional conformal coating models (RSP-200-CC)
LED indicator for power on
Model No
RSP-200-2-5
RSP-200-3-3
RSP-200-4
RSP-200-5
RSP-200-7-5
RSP-200-12
RSP-200-13-5
RSP-200-15
RSP-200-24
RSP-200-27
RSP-200-36
RSP-200-48
Voltage (Max)
2.5V
3.3V
4V
5V
7.5V
12V
13.5V
15V
24V
27V
36V
48V
Current (Amps)
40A
40A
40A
40A
26.7A
16.7A
14.9A
13.4A
8.4A
7.5A
5.56A
4.2A
Power (Watts)
100W
132W
160W
200W
200.25W
200.4W
201.15W
201W
201.6W
202.5W
200.16W
201.6W
R&N (mV)
100mV
100mV
100mV
150mV
150mV
150mV
150mV
150mV
150mV
200mV
220mV
240mV
Efficiency (%)
81.5%
84%
85.5%
87%
89%
89%
89%
89.5%
89.5%
89%
90%
90%
Description
The RSP-200 is a 200W single output enclosed power supply with PFC function >0.95. With a 1U low profile of
30mm the series are suitable for applications requiring a low profile installation. Cooling by free air convection
allows an operating temperature of -30~+70°C, other functions of the RSP-200 series include protection for short
circuit, overload, over voltage and over temperature.
Page 109
Avanti Power Repairs Ltd
SP-200 Series - 200W Single Output PFC Function Power Supply
Applications
Signage
Charging
General electronic machinery or equipment
Automation
Test equipment
Charge and Sync Tablet Carry Cases
Features
Universal AC input/Full range
Built-in active PFC function, PF>0.93
Protections: Short circuit/Overload/Over voltage/Over
temperature
Built-in cooling fan speed control
Built-in constant current limiting circuit
Built-in fan speed control
Remote ON-OFF control (optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
Model No
SP-200-3-3
SP-200-5
SP-200-7-5
SP-200-12
SP-200-13-5
SP-200-15
SP-200-24
SP-200-27
SP-200-48
Voltage (Max)
3.3V
5V
8V
12V
14V
15V
24V
27V
48V
Current (Amps)
40A
40A
27A
17A
15A
13.4A
8.4A
8A
4.2A
Power (Watts)
132W
200W
200.2W
200.4W
201.1W
201W
202W
202.5W
202W
R&N (mV)
100mV
100mV
100mV
100mV
100mV
100mV
100mV
100mV
150mV
Efficiency (%)
71%
77%
78.5%
84%
83.5%
84%
85%
85%
85%
Description
A 200W single output enclosed PFC function power supply, with built in active PFC function, PF>0.93. Built-in
cooling fan with speed control, LED indicator for power on and an optional ON-OFF control.
Page 110
Avanti Power Repairs Ltd
QP-200 Series - 200W Quad Output PFC Function Power Supply
Applications: Factory automation, Instrumentation, Telecommunications
Features
Universal AC input
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage, over temperature
protections
Forced air cooling by built-in DC fan
CH1,2 can be adjustable from -5~+10%
With power good and fail signal output(Optional)
Built-in remote sense function for CH1,2
100% full load burn-in test
CH4 can set to positive voltage, after consultation, prior to
delivery
Fixed switching frequency at PFC:67KHz
PWM:134KHz(Optional)
Model No
QP-200D
QP-200F
QP-200-3A
QP-200-3B
QP-200-3C
QP-200-3D
QP-200-3E
Voltage (Max)
5V
12V
24V
-12V
5V
15V
24V
-15V
5V
3.3V
12V
-5V
5V
3.3V
12V
-12V
5V
3.3V
15V
-15V
5V
3.3V
24V
-12V
5V
3.3V
24V
-15V
Current (Amps)
15A
4A
3A
1A
15A
3A
3A
1A
15A
15A
6A
1A
15A
15A
6A
1A
15A
15A
5A
1A
10A
15A
4A
1A
10A
15A
4A
1A
Page 111
Power (Watts)
203.4W
202.5W
200W
205W
210W
204W
206W
R&N (mV)
100mV
150mV
150mV
150mV
100mV
150mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
100mV
100mV
150mV
150mV
Efficiency (%)
75%
75%
72%
72%
72%
74%
74%
Avanti Power Repairs Ltd
HRPG-200 Series - 200W Single Output & 5Vsb AC-DC PFC Power Supply
Applications
General electronics
Factory automation
Moving signs
Test and measurement equipment
Features
Universal AC input
Built-in active PFC function, PF>0.95
High efficiency up to 89% (typ.)
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in ON-OFF control
Built-in remote sense function
Stand by 5V@0.3A
No load power consumption <0.5A
Model No
HRPG-200-3-3
HRPG-200-5
HRPG-200-7-5
HRPG-200-12
HRPG-200-15
HRPG-200-24
HRPG-200-36
HRPG-200-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (Amps)
40A
35A
27A
17A
13.4A
8.4A
6A
4.3A
Power (Watts)
132W
175W
200.3W
200.4W
201W
202W
205.2W
206.4W
R&N (mV)
80mV
90mV
100mV
120mV
150mV
150mV
250mV
250mV
Efficiency (%)
80%
84%
86%
88%
88%
88%
89%
89%
Description
HRPG-200 Series are 200W AC/DC miniature enclosed type power supplies with PFC function that fulfil the
requirement of EN61000-3-2 for harmonic current with remote ON/OFF control and 5V/0.3A standby output to
achieve no load power consumption <0.5W. Other standard functions of HRPG-200 include 300VAC input surge
immunity for 5 seconds, remote sense, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and
protection for short-circuit, overload (constant current limiting), over voltage, and over temperature.
Page 112
Avanti Power Repairs Ltd
HRP-200 Series - 200W Single Output AC/DC Enclosed Power Supply with PFC Function
Applications
General electronic application
Factory automation
LED moving signs
Test and measurement equipment
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 89%
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in remote sense function
Model No
HRP-200-3-3
HRP-200-5
HRP-200-7-5
HRP-200-12
Voltage (Max)
3.3V
5V
8V
12V
Current (Amps)
40A
35A
27A
17A
Power (Watts)
132W
175W
200.3W
200.4W
R&N (mV)
80mV
90mV
100mV
120mV
Efficiency (%)
80%
84%
86%
88%
Description
HRP-200 Series are 200W AC/DC enclosed type power supplies with built in active PFC function. With a 1U low
profile of 38mm and cooling by free air convection allows an operating temperature of -40~+70 °C.
Page 113
Avanti Power Repairs Ltd
SPS-220P Series - 220W Single Output AC-DC Enclosed Power Supply
Features
Power ON with LED indicator
Built in EMI filter, low ripple noise
Universal AC input with active power factor correction,
P.F.>0.95
Over load, over voltage protection
Short circuit shutdown and Auto recovery
Output voltage ±10% adjustment
Over temperature protection(Optional)
Remote Control ON/OFF (Optional)
Non min. load requirement
100% 50°C burn-in test
Built-in long life ball bearing fan
UL, cUL, TUV, CB, CE approved
Model No
SPS-220P-3-3
SPS-220P-05
SPS-220P-12
SPS-220P-15
SPS-220P-24
SPS-220P-27
SPS-220P-48
Voltage (Max)
3.3V
5V
12V
15V
24V
27V
48V
Current (Amps)
40A
40A
18.4A
15A
9.2A
8.2A
5A
Page 114
Power (Watts)
132W
200W
220W
220W
220W
220W
220W
R&N (mV)
50mV
70mV
100mV
120mV
150mV
180mV
250mV
Efficiency (%)
69%
75%
80%
80%
83%
84%
84%
Avanti Power Repairs Ltd
USP-225 Series - 225W Single Output U-Bracket PFC Function Power Supply
Applications
General electronic equipment
Low profile applications
Embedded power solutions
Features
U-bracket low profile:38mm
High power density 4.7w/in
Universal AC input / full range
Built in active PFC circuit
Active AC surge current limiting
Protections: Short circuit/Over load/Over voltage
Air convection for 150W (free) and 225W (forced)
**Please note that values are for forced air cooling**
Model No
USP-225-3-3
USP-225-5
USP-225-12
USP-225-15
USP-225-24
USP-225-48
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
40A
40A
19A
15A
9.4A
5A
Power (Watts)
132W
200W
224.4W
225W
226W
226W
R&N (mV)
100mV
100mV
100mV
100mV
150mV
250mV
Efficiency (%)
72%
77%
83%
84%
85%
86%
Description
The USP-225 Series is a single output U-bracket power supply with PFC function. A highly efficient power supply
at 93%, protections including, short circuit, overload, over voltage and over temperature. Cooling by free air
convection allows an operating temperature of -20~+65°C. **Please note that values are for forced air cooling**
Page 115
Avanti Power Repairs Ltd
SPS-230P Series - 230W Single Output PFC Function Power Supply
Features
Universal AC input with active power factor correction,
P.F.>0.95
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
Remote Control ON/OFF (Optional)
Non min load requirement
100% 50°C burn-in test
Model No
SPS-230P-3-3
SPS-230P-05
SPS-230P-7-5
SPS-230P-12
SPS-230P-15
SPS-230P-24
SPS-230P-27
SPS-230P-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
27V
48V
Current (Amps)
40A
40A
31A
19.2A
15.4A
10A
9A
5A
Page 116
Power (Watts)
132W
200W
230W
230W
230W
230W
230W
230W
R&N (mV)
50mV
70mV
80mV
100mV
120mV
150mV
180mV
250mV
Efficiency (%)
69%
75%
77%
80%
80%
83%
84%
84%
Avanti Power Repairs Ltd
SPU-230-D Series - 230W Dual Output AC-DC Enclosed Power Supply
Features
High efficiency, high reliability
Built in EMI filter, low ripple noise
AC input 90~132 V / 180~264V auto sensing
Over load, over voltage, short circuit protection
Built-in long life Ball-bearing FAN
100% 50° burn-in test
UL, cUL, TUV, CB, CE standard
Model No
SPU-230-D1
SPU-230-D2
SPU-230-D3
Voltage (Max)
8V
5V
12V
5V
24V
5V
Current (Amps)
30A
4A
18A
4A
9A
4A
Page 117
Power (Watts)
230W
230W
230W
R&N (mV)
80mV
70mV
120mV
70mV
240mV
70mV
Efficiency (%)
73%
75%
76%
Avanti Power Repairs Ltd
SPU-230-Q Series - 230W Quad Output AC-DC Enclosed Power Supply
Features
High efficiency, high reliability
Built in EMI filter, low ripple noise
AC 90~132 V / 180~264V auto sensing
Frequency 47~63 Hz
Over load, over voltage, short circuit protection
Built-in long life Ball-bearing FAN
100% 50° burn-in test
UL, cUL, TUV, ,CB, CE standard
Model No
SPU-230-Q1
SPU-230-Q2
SPU-230-Q3
Voltage (Max)
5V
12V
-12V
-5V
5V
15V
-15V
-5V
5V
12V
-12V
24V
Current (Amps)
35A
12A
2A
2A
30A
10A
2A
2A
25A
10A
2A
3A
Page 118
Power (Watts)
230W
230W
230W
R&N (mV)
50mV
120mV
240mV
100mV
50mV
150mV
300mV
100mV
50mV
100mV
240mV
240mV
Efficiency (%)
74%
74%
74%
Avanti Power Repairs Ltd
SP-240 Series - 240W AC-DC Enclosed Power Supply with Active PFC
Applications
Industrial automation
Moving sign
Electronic equipment
Instrumentation
Features
Universal AC input / Full Range
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage, over temperature
protections
Forced air cooling by built-in DC fan
Built-in fan ON/OFF control
LED indicator for power on
UL, cUL, TUV, CE & CB Approvals
Fixed switching frequency at 90KHz
Model No
SP-240-5
SP-240-7-5
SP-240-12
SP-240-15
SP-240-24
SP-240-30
SP-240-48
Voltage (Max)
5V
8V
12V
15V
24V
30V
48V
Current (Amps)
45A
32A
20A
16A
10A
8A
5A
Power (Watts)
225W
240W
240W
240W
240W
240W
240W
R&N (mV)
150mV
150mV
150mV
150mV
150mV
150mV
150mV
Efficiency (%)
79%
83%
86%
86%
87%
87%
89%
Description
SP-240 is a reduced profile version of the ever popular S-240 Series with efficiency 1~4% higher and Active PFC
function. With 88 to 264VAC full range input and output voltage options of 5V, 7.5V, 12V, 15V, 24V, 30V &
48V. Standard functions include adjustable output voltage, built-in fan ON/OFF control and short circuit, over lad,
over voltage and over temperature protections.
Page 119
Avanti Power Repairs Ltd
SPS-240P Series - 240W Single Output AC-DC Enclosed Power Supply
Features
AC input 88V ~ 132V or 175V ~ 264V, select by switch
P.F.C. function
Built in EMI filter, low ripple noise
Over load, over voltage, short circuit protection
Output voltage ±10% adjustment
Remote Control ON/OFF (Optional)
Non min load requirement
100% 50° burn-in test
Meet UL, cUL, TUV, CB, CE standard
Model No
SPS-240P-12
Voltage (Max)
12V
Current (Amps)
20A
Page 120
Power (Watts)
240W
R&N (mV)
100mV
Efficiency (%)
80%
Avanti Power Repairs Ltd
HDP-240 Series - 240W Dual Output Enclosed LED Power Supply with PFC Function
Applications
LED electric display/moving sign
LED TV wall
LED channel letter related applications
Features
Universal AC input/Full range
Built-in active PFC function, PF≥0.94
High efficiency up to 84%
Protections: Short circuit/Overload/Over voltage/Over
temperature
Forced air cooling by built-in DC fan
1U low profile 36mm
Conformal coated
Built-in cooling fan ON-OFF control
ZVS technology to reduce power dissipation
LED indicator for power on
Model No
HDP-240 Series
Voltage (Max)
3.8V
2.8V
Current (Amps)
41.5A
25A
Power (Watts)
240W
R&N (mV)
100mV
Efficiency (%)
84%
Description
The HDP-240 series is a highly efficient enclosed type power supply with a 1U low profile, active PFC function and
low voltage dual output. With a built-in DC fan and a new system design concept enabling the power supply to drive
RGB LED chips by 3.8/2.8V outputs, it is ideal for LED moving sign applications.
Page 121
Avanti Power Repairs Ltd
Q-250 Series - 250W Quad Output AC-DC Enclosed Switching Power Supply
Applications
General electronic equipment
Automation
Test equipment
Features
AC input range selected by switch
Protections: Short circuit/Over load/Over voltage
Forced air cooling by built-in DC fan
100% full load burn-in test
Fixed switching frequency at 75KHz
Low cost
High reliability
Model No
Q-250B
Q-250C
Q-250D
Q-250F
Voltage (Max)
5V
12V
-12V
-5V
5V
15V
-15V
-5V
5V
12V
24V
12V
5V
15V
24V
-15V
Current (Amps)
20A
7A
1A
1A
20A
5A
1A
1A
10A
5A
5A
1A
10A
4A
5A
1A
Power (Watts)
201W
195W
242W
246W
R&N (mV)
80mV
120mV
120mV
50mV
80mV
150mV
150mV
50mV
80mV
120mV
240mV
120mV
80mV
150mV
240mV
150mV
Efficiency (%)
73%
74%
78%
78%
Description
The Q-250 Series is a low cost, highly reliable 250W quad output AC-DC enclosed power supply with a selectable
AC input range. A high operating temperature of -10~+60°C due to forced air cooling by the built-in Dc fan.
Protections including short circuit, over load and over voltage. Fixed switching frequency at 75KHz.
Page 122
Avanti Power Repairs Ltd
HSP-250 Series - 250W Single Output AC-DC Enclosed Power Supply with PFC Function
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 87%
Protections: Short circuit / Overload / Over voltage / Over
temperature
Forced air cooling by built-in DC fan
1U low profile 41mm
Conformal coated
Built-in cooling fan ON-OFF control
Built-in remote sense function
Model No
HSP-250-2-5
HSP-250-3-6
HSP-250-5
Voltage (Max)
2.5V
4V
5V
Current (Amps)
50A
50A
50A
Power (Watts)
125W
180W
250W
R&N (mV)
100mV
100mV
100mV
Efficiency (%)
79%
83%
87%
Description
The HSP-250 series is a 250W Single Output enclosed power supply with PFC function. Forced air cooling by builtin DC fan allows an operating temperature of -40~+70°C. Protections including short circuit, overload, over voltage
and over temperature.
Page 123
Avanti Power Repairs Ltd
HRP-300 Series - 300W High Reliability Enclosed Power Supply with PFC Function
Applications
General electronic applications
Factory automation
LED moving signs
Test and measurement equipment
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 89% (typ.)
Short circuit, over load, over voltage, over temperature
protections
With DC OK signal output
Withstand 300VAC surge input for 5 seconds
Built-in constant current limiting circuit
1U low profile 41mm
Built-in cooling Fan ON-OFF control (load)
Built-in remote sense function
Model No
HRP-300-3-3
HRP-300-5
HRP-300-7-5
HRP-300-12
HRP-300-15
HRP-300-24
HRP-300-36
HRP-300-48
Voltage (Max)
3.3V
8V
8V
12V
15V
24V
36V
48V
Current (Amps)
60A
40A
40A
27A
22A
14A
9A
7A
Power (Watts)
198W
300W
300W
324W
330W
336W
324W
336W
R&N (mV)
80mV
100mV
100mV
120mV
150mV
150mV
250mV
250mV
Efficiency (%)
79%
82%
86%
88%
88%
87%
88%
89%
Description
HRP-300 are a range of miniature high reliability enclosed power supplies featuring high efficiency, active PFC
function and a miniature 1U rack style profile. Possessing up to 89% of high efficiency, it can be cooled by the builtin long life DC fan from -30°C to +50°C ambient temperature under full load condition. Other features include
300VAC input surge immunity for 5 seconds, remote sense function and short circuit, over load (constant current
mode), over voltage and over temperature protections.
Page 124
Avanti Power Repairs Ltd
HRPG-300 Series - 300W High Reliability Enclosed Power Supply with +5Vsb & PFC Function
Applications
General electronic applications
Factory automation
LED moving signs
Test and measurement equipment
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 89% (typ.)
Short circuit, over load, over voltage, over temperature
protections
With DC OK signal output
Withstand 300VAC surge input for 5 seconds
Built-in constant current limiting circuit
1U low profile 41mm
Built-in cooling Fan ON-OFF control
Built-in remote sense function
Built-in remote ON-OFF control
Standby 5V@0.3A
No load power consumption<0.5W
Model No
HRPG-300-3-3
HRPG-300-5
HRPG-300-7-5
HRPG-300-12
HRPG-300-15
HRPG-300-24
HRPG-300-36
HRPG-300-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (Amps)
60A
60A
40A
27A
22A
14A
9A
7A
Power (Watts)
198W
300W
300W
324W
330W
336W
324W
336W
R&N (mV)
80mV
90mV
100mV
120mV
150mV
150mV
250mV
250mV
Efficiency (%)
80%
82%
86%
88%
88%
87%
88%
89%
Description
HRPG-300 are a range of miniature high reliability enclosed power supplies with +5Vsb featuring no load power
consumption <0.5W, high efficiency, active PFC function and a miniature 1U rack style profile. Possessing up to
89% of high efficiency, it can be cooled by the built-in long life DC fan from -30°C to +50°C ambient temperature
under full load condition. Other features include 300VAC input surge immunity for 5 seconds, remote sense function
and short circuit, over load (constant current mode), over voltage and over temperature protections.
Page 125
Avanti Power Repairs Ltd
SPV-300 Series - 300W Single Output Enclosed Power Supply with PFC Function
Applications
LCD panel burn-in systems
IC testing equipment
Factory automation
Mechanical and electrical industry
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Short circuit, over load, over voltage, over temperature
protections
Forced air cooling by built in DC fan
Built in fan speed control
Fixed switching frequency at 100KHz
Output voltage programmable from 20~110% by
1~5.5VDC external control signal
Model No
SPV-300-12
SPV-300-24
SPV-300-48
Voltage (Max)
12V
24V
48V
Current (Amps)
25A
12.5A
6.25A
Power (Watts)
300W
300W
300W
R&N (mV)
150mV
150mV
240mV
Efficiency (%)
84%
85%
86.5%
Description
SPV-300 Series are a programmable output 300W single output enclosed power supply range with efficiency uo to
83% and built in active PFC >0.94. These enclosed power supplies also have remote on/off control, fan speed
control and full protections.
Page 126
Avanti Power Repairs Ltd
SP-320 Series - 320W Single Output PFC Function Power Supply
Applications
Industrial automation
Moving sign
Electronic equipment
Instrumentation
Features
Universal AC input/Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit/Overload/Over voltage/Over
temperature
Forced air cooling by built-in DC fan
Built-in fan speed control
Fixed switching frequency at 100KHz
Model No
SP-320-3-3
SP-320-5
SP-320-7-5
SP-320-12
SP-320-13-5
SP-320-15
SP-320-24
SP-320-27
SP-320-36
SP-320-48
Voltage (Max)
3.3V
5V
8V
12V
14V
15V
24V
27V
36V
48V
Current (Amps)
55A
55A
40A
25A
22A
20A
13A
12A
9A
7A
Power (Watts)
182W
275W
300W
300W
297W
300W
312W
316W
317W
322W
R&N (mV)
150mV
150mV
150mV
150mV
150mV
150mV
150mV
200mV
220mV
240mV
Efficiency (%)
74%
79%
83%
86%
86%
86%
87%
88%
87%
89%
Description
The SP-320 series is a single output power supply with built-in active PFC function. Protections including short
circuit, overload, over voltage and over temperature. Forced air cooling by built-in DC fan with fan speed control.
Page 127
Avanti Power Repairs Ltd
RSP-320 Series - 320W Low Profile Economical Enclosed Type Power Supply
Applications
Industrial control systems
Instruments
LED displays
Application requiring low profile installations
Features
30mm low profile design for 1U installation
Universal AC input range 88~264V
Built-in active PFC function
High efficiency up to 90%
Forced air cooling by built-in DC fan with speed control
function
-30~+70°C operating temperature
Protection: Short circuit/Overload/Over voltage/Over
temperature
LED indicator
Optional conformal coating models (RSP-320-CC)
Model No
RSP-320-2-5
RSP-320-3-3
RSP-320-4
RSP-320-5
RSP-320-7-5
RSP-320-12
RSP-320-13-5
RSP-320-15
RSP-320-24
RSP-320-27
RSP-320-36
RSP-320-48
Voltage (Max)
2.5V
3.3V
4V
5V
7.5V
12V
13.5V
15V
24V
27V
36V
48V
Current (Amps)
60A
60A
60A
60A
40A
26.7A
23.8A
21.4A
13.4A
11.9A
8.9A
6.7A
Power (Watts)
150W
198W
240W
300W
300W
320.4W
321.3W
321W
321.6W
321.3W
320.4W
321.6W
R&N (mV)
100mV
100mV
100mV
150mV
150mV
150mV
150mV
150mV
150mV
200mV
220mV
240mV
Efficiency (%)
79.5%
82%
84.5%
85%
88%
88%
88%
88.5%
89%
89%
89.5%
90%
Description
The RSP-320 series is a 320W economical enclosed power supply with a 30mm low profile design for 1U
installations. Standard features of the RSP-320 series are, PFC function, high efficiency of up to 90% and forced air
cooling by built-in DC fan. Suitable applications include general industrial control systems, mechanical & electrical
industry instruments and LED displays or any systems requiring a low profile.
Page 128
Avanti Power Repairs Ltd
QP-320 Series - 320W Quad Output PFC Enclosed Power Supply
Applications
Motor based machinery
Gaming machines,
Lottery vending machines
Factory automation
Instrumentation
Other general electronics
Features
Universal AC input/full range
20A peak load capability for 25V channel
Built-in active PFC circuit
Short circuit, over load, over voltage and over
temperature protection
Built in remote sense function
Power fail/Power good signal output
CH1 & CH2 can be adjusted -5 to +10% rated voltage
Model No
QP-320D
QP-320F
Voltage (Max)
5V
12V
24V
-12V
5V
15V
24V
-15V
Current (Amps)
20A
10A
3A
2A
20A
8A
3A
2A
Power (Watts)
316W
316W
R&N (mV)
100mV
150mV
150mV
150mV
100mV
150mV
150mV
150mV
Efficiency (%)
83%
83%
Description
QP-320 Series are 320W quad output enclosed type switching power supplies with power factor correction (PFC)
function. Featuring 20A/1ms peak current capability for the 24V channel, which is repeatable every 100ms, QP-320
series can provide the power demand for operating motor based machinery. Alongside the standard functions of
remote sense and PF/PG signal output the output voltage of CH1 & CH2 can be adjusted from -5 to +10%, which
gives users more flexibility for use in different kinds of application.
Page 129
Avanti Power Repairs Ltd
USP-350 Series - 350W Single Output U-Bracket PSU with PFC Function
Applications
General electronic equipment
Low profile applications
Embedded power solutions
Features
Universal AC input / Full range
Built in active PFC circuit compliance to EN61000-3-2
Protections: Short circuit/Over load/Over voltage/Over
temperature
Free air convection for 300W and 350W with 23.5CFM
forced air
High power density 5.6w/in³
Active AC surge current limiting
U-bracket low profile: 38mm
ZVS technology to reduce power dissipation
**Please note that values are for forced air cooling, please
see PDF for convection cooled values**
Model No
USP-350-3-3
USP-350-5
USP-350-12
USP-350-15
USP-350-24
USP-350-48
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
70A
70A
29.2A
23.4A
15A
7.3A
Power (Watts)
131W
350W
350.4W
351W
350.4W
350.4W
R&N (mV)
80mV
80mV
100mV
100mV
150mV
150mV
Efficiency (%)
78%
84%
88%
88%
88%
89%
Description
The USP-350 series single output U-bracket power supply with PFC function. A high power density of 5.6w/in³ and
a low profile of 38mm. Protections including short circuit, over load, over voltage and over temperature.**Please
note that values are for forced air cooling, please see PDF for convection cooled values**
Page 130
Avanti Power Repairs Ltd
QP-375 Series - 375W Quad Output PFC Function Power Supply
Applications: General electronic machinery, Factory automation, Instrumentation, Moving Signs, Telecommunications
Features
Universal AC input
Built-in active PFC function PF>0.95
Short circuit, Over load, Over voltage, Over temperature
protections
Forced air cooling by built-in DC fan
3rd & 4th output are isolated from other outputs and the polarity
can be reversed
No minimum load requirement for 2nd, 3rd & 4th output
Outputs adjustable from -5 ~ +10%
Power good and fail signal output
Built-in remote ON-OFF control
Fixed switching frequency at 100KHz
Model No
QP-375-5A
QP-375-5B
QP-375-5C
QP-375-5D
QP-375-5E
QP-375-24B
QP-375-24C
Voltage (Max)
5V
12V
12V
12V
5V
12V
12V
5V
5V
12V
15V
15V
5V
12V
12V
24V
5V
12V
24V
24V
24V
5V
12V
12V
24V
5V
15V
15V
Current (Amps)
30A
10A
6A
3A
30A
10A
6A
3A
30A
9A
4A
4A
30A
9A
4A
3A
30A
9A
3A
2A
10A
10A
4A
4A
10A
10A
4A
4A
Power (Watts)
378W
357W
378W
378W
378W
386W
410W
R&N (mV)
100mV
150mV
150mV
50mV
100mV
120mV
120mV
50mV
100mV
150mV
150mV
240mV
100mV
120mV
120mV
240mV
100mV
120mV
120mV
240mV
240mV
50mV
120mV
120mV
240mV
50mV
150mV
150mV
Efficiency (%)
77%
77%
77%
78%
78%
78%
80%
Description
The QP-375 series is a 375W quad output enclosed power supply with built-in active PFC function. Protections
including, short circuit, overload, over voltage and over temperature. Forced air cooling by built-in DC fan allows an
operating temperature of -10~+60°C. With a fixed switching frequency at 100KHz enabling designs to avoid
interference with system clock frequencies.
Page 131
Avanti Power Repairs Ltd
QP-375-24 Series - 375W Quad Output Enclosed Power Supply with PFC Function
Applications
General electronic machinery
Factory Automation
Instrumentation
Moving signs
Telecommunications
Data communications
Features
Universal AC input/Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit/Overload/Over voltage/Over
temperature
Forced air cooling by built-in DC fan
CH3,4 are isolated from other output and the polarity can
be reversed
No minimum load requirement for CH2,3,4
All outputs can be adjustable from -5~+10%
With power good and fail signal output
Built-in remote ON-OFF control
Fixed switching frequency at 100KHz
Model No
QP-375-24B
QP-375-24C
Voltage (Max)
24V
5V
12V
12V
24V
5V
15V
15V
Current (Amps)
10A
10A
4A
4A
10A
10A
4A
4A
Power (Watts)
386W
410W
R&N (mV)
240mV
50mV
120mV
120mV
240mV
50mV
150mV
150mV
Efficiency (%)
78%
80%
Description
The QP-375-24 Series is a 375W quad output enclosed power supply with built-in active PFC function. Protections
including short circuit, overload, over voltage and over temperature. Forced air cooling by built-in DC fan allows an
operating temperature of -10~+60°C. Channel 3 and 4 are isolated from other outputs so the polarity can be
reversed. With fixed switching frequency at 100Khz enabling designs to avoid interference with system clock
frequencies.
Page 132
Avanti Power Repairs Ltd
HRP-450 Series - 450W High Reliability Enclosed Power Supply with PFC Function
Applications
General electronic applications
Factory automation
LED moving signs
Test and measurement equipment
Features
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 89.5% (typ.)
Short circuit, over load, over voltage, over temperature
protections
With DC OK signal output
Withstand 300VAC surge input for 5 seconds
Built-in constant current limiting circuit
1U low profile 41mm
Built-in cooling Fan ON-OFF control (load)
Built-in remote sense function
Model No
HRP-450-3-3
HRP-450-5
HRP-450-7-5
HRP-450-15
HRP-450-24
HRP-450-36
HRP-450-48
Voltage (Max)
3.3V
5V
8V
15V
24V
36V
48V
Current (Amps)
90A
90A
60A
30A
19A
12.5A
10A
Power (Watts)
297W
450W
450W
450W
451.2W
450W
456W
R&N (mV)
80mV
80mV
100mV
150mV
150mV
240mV
240mV
Efficiency (%)
80%
83%
86.5%
89%
88%
89%
90%
Description
HRP-450 are a range of miniature high reliability enclosed power supplies featuring high efficiency, active PFC
function and a miniature 1U rack style profile. Possessing up to 89.5% of high efficiency, it can be cooled by the
built-in long life DC fan from -40°C to +85°C ambient temperature under full load condition. Other features include
300VAC input surge immunity for 5 seconds, remote sense function and short circuit, over load (constant current
mode), over voltage and over temperature protections.
Page 133
Avanti Power Repairs Ltd
HRPG-450 series - 450W Single Output & 5Vsb AC-DC PFC Power Supply
Applications
General electronics
Factory automation
Moving signs
Test and measurement equipment
Features
Universal AC input
Built-in active PFC function, PF>0.95
High efficiency up to 88% (typ.)
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in ON-OFF control
Built-in remote sense function
Stand by 5V@0.3A
No load power consumption <0.5A
Model No
HRPG-450-3-3
HRPG-450-5
HRPG-450-7-5
HRPG-450-12
HRP-450-12
HRPG-450-15
HRPG-450-24
HRPG-450-36
HRPG-450-48
Voltage (Max)
3.3V
5V
8V
12V
12V
15V
24V
36V
48V
Current (Amps)
90A
90A
60A
38A
38A
30A
19A
12.5A
10A
Power (Watts)
297W
450W
450W
450W
450W
450W
451.2W
450W
456W
R&N (mV)
80mV
80mV
100mV
120mV
120mV
150mV
150mV
240mV
240mV
Efficiency (%)
80%
83%
86.5%
88%
88%
89%
88%
89%
90%
Description
HRPG-150 Series are 150W AC/DC miniature enclosed type power supplies with PFC function that fulfil the
requirement of EN61000-3-2 for harmonic current with remote ON/OFF control and 5V/0.3A standby output to
achieve no load power consumption <0.5W. Other standard functions of HRPG-150 include 300VAC input surge
immunity for 5 seconds, remote sense, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and
protection for short-circuit, overload (constant current limiting), over voltage, and over temperature.
Page 134
Avanti Power Repairs Ltd
MP450 Series - 450W Modular Power Supply
Features
Universal input voltage
Uses ZVS technology to reduce power dissipation and
improve efficiency
Large range of output configurations available
Remote control on each module
Remote sense on MS-75, 150 & 300 modules
Built in active PFC, PF>0.95
Built in parallel function on MS-300
Fan alarm function
Forced air cooling
MS-75 Series - 75W Single Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-75L
MS-75M
MS-75N
MS-75O
MS-75P
MS-75Q
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
15A
15A
0.63A
5A
3.2A
1.6A
Page 135
Power (Watts)
75W
75W
75W
75W
75W
75W
R&N (mV)
80mV
80mV
150mV
150mV
150mV
250mV
Avanti Power Repairs Ltd
MS-150 Series - 150W Single Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-150A
MS-150B
MS-150C
MS-150D
MS-150E
MS-150F
MS-150G
MS-150H
MS-150I
MS-150J
MS-150K
Voltage (Max)
2V
3.3V
5V
7.5V
12V
15V
18V
24V
27V
33V
48V
Current (Amps)
25A
25A
25A
18A
13A
10A
8.5A
6.5A
5.8A
4.7A
3.2A
Power (Watts)
150W
150W
150W
150W
150W
150W
150W
150W
150W
150W
150W
R&N (mV)
50mV
80mV
80mV
100mV
150mV
150mV
150mV
150mV
150mV
250mV
250mV
MS-300 Series - 300W Single Output parallel able 2 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-3002A
MS-3002B
MS-3002C
MS-3002D
MS-3002E
MS-3002F
MS-3002G
MS-3002H
MS-3002I
MS-3002J
MS-3002K
Voltage (Max)
2V
3.3V
5V
7.5V
12V
15V
18V
24V
27V
33V
48V
Current (Amps)
50A
50A
50A
40A
25A
20A
16.7A
12.5A
11.2A
9.1A
6.3A
Page 136
Power (Watts)
300W
300W
300W
300W
300W
300W
300W
300W
300W
300W
300W
R&N (mV)
80mV
80mV
80mV
100mV
150mV
150mV
150mV
150mV
200mV
250mV
300mV
Avanti Power Repairs Ltd
MD-100 Series - 100W Dual Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MD-100R
MD-100S
MD-100T
MD-100U
MD-100V
MD-100W
MD-100X
Voltage (Max)
5V
5V
5V
12V
5V
10V
24V
5V
24V
12V
12V
12V
15V
15V
Current (Amps)
10A
8A
10A
5.8A
15A
4.7A
3A
10A
3A
4.7A
5A
5.8A
4.7A
4.7A
Power (Watts)
90W
90W
100.4W
100.4W
101W
101W
100W
100W
100.8W
100.8W
100.8W
100.8W
100.5W
100.5W
R&N (mV)
100mV
100mV
100mV
150mV
100mV
150mV
200mV
100mV
240mV
120mV
120mV
120mV
150mV
150mV
Description
Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using
zero voltage switching technology to realize the power factor correction, the line input is rectified into high DC
voltage by the front end PFC stage, and then the DC output modules will transfer the operating voltage into all kinds
of DC output voltages from 1.6V to 53V. There are currently 75W, 150W, 300W single output modules and 100W
dual output modules to fulfil all kinds of applications up to 14 isolated outputs. There are millions of combinations
available for the modular series. You can configure the DC outputs needed to get the fastest solution for your power
requirements with safety and EMC certificates. No more NRE/safety application charges and long periods of waiting
for certificates to come through! This is a revolutionary standard power solution that fulfils your custom made
request!
Page 137
Avanti Power Repairs Ltd
SP-480 Series - 480W Single Output AC-DC PFC Enclosed Power Supply
Applications
Industrial automation
Moving sign
Electronic equipment
Instrumentation
Features
Universal AC input / Full range
Built in active PFC function, PF>0.95
Short circuit, over load, over voltage, over temperature
protections
Forced air cooling by built-in DC fan
High power density 5.18w/in³
43mm thickness low profile
Built-in remote ON-OFF control
Built-in remote sense function
Active AC surge current limiting
Model No
SP-480-3-3
SP-480-5
SP-480-12
SP-480-15
SP-480-24
SP-480-48
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
85A
85A
40A
32A
20A
10A
Power (Watts)
280.5W
425W
480W
480W
480W
480W
R&N (mV)
80mV
80mV
120mV
150mV
150mV
240mV
Efficiency (%)
73%
79%
85%
85%
87%
89%
Description
The SP-480 series is a 480W single output AC-DC enclosed power supply with built-in active PFC function.
Protections including short circuit, over load, over voltage and over temperature. Forced air cooling built-in DC fan
allows an operating temperature of -20~+60°C. A low profile of 43mm and high power density of 5.18W/in³ means
this power supply is suitable for applications where a compact design is required.
Page 138
Avanti Power Repairs Ltd
RSP-500 Series - 500W Single Output Enclosed Power Supplies with PFC Function
Applications
Industrial control systems
Mechanical industry
Electrical industry
Instrumentation
LED displays
Features
Universal 85-264VAC input
Built-in active PFC function, PF>0.95
1U low profile 40.5mm
High efficiency up to 90.5%
Built-in remote on/off control
Built-in remote sense function
Short circuit, over load, over voltage, over temperature
protections
LED indicator for power on
Model No
RSP-500-3-3
RSP-500-4
RSP-500-5
RSP-500-12
RSP-500-15
RSP-500-24
RSP-500-27
RSP-500-48
Voltage (Max)
3.3V
4V
5V
12V
15V
24V
27V
48V
Current (Amps)
90A
90A
90A
41.7A
33.4A
21A
18.6A
10.5A
Power (Watts)
297W
360W
450W
500.4W
501W
504W
502.2W
504W
R&N (mV)
120mV
120mV
150mV
150mV
150mV
150mV
150mV
150mV
Efficiency (%)
81%
83%
83%
89%
88%
89%
89.5%
90.5%
Description
RSP-500 Series are a range of low profile enclosed power supplies with PFC function and output voltage options
ranging from 3.3Vdc to 48Vdc. This Mean Well range of enclosed power supplies are also equipped with up to
90.5% high efficiency, remote sense, remote ON/OFF control, and fan speed control, as well as protections for short
circuit, overload, over voltage and over temperature. The RSP-500 Series complies with UL, CUL, TUV, CB, and
CE regulations.
Page 139
Avanti Power Repairs Ltd
USP-500 Series - 500W Single Output U Bracket PFC Function PSU
Applications
General electronic applications
Factory automation
Telecommunications
Networking
Test & measurement
Audio systems
Large sized LCD TV's
Features
Universal AC input
Built in active PFC circuit compliance to EN61000-3-2
Short circuit, over load, over voltage, over temperature
protections
Free air convection for 400W and 500W with 23.5CFM
forced air
High power density 6.2w/in3
U-bracket low profile: 41mm
Built-in remote ON-OFF control
Built-in remote sense function
AC input active surge current limiting
Built in DC OK active signal
Model No
USP-500-5
USP-500-12
USP-500-15
USP-500-24
USP-500-48
Voltage (Max)
5V
12V
15V
24V
48V
Current (Amps)
80A
42A
34A
21A
10.5A
Power (Watts)
400W
504W
502.5W
504W
504W
R&N (mV)
80mV
100mV
100mV
150mV
150mV
Efficiency (%)
85%
90%
90%
89%
90%
Description
Featuring advanced technology for high efficiency, USP-500 possesses up to 90% of efficiency, even for the 12V
model. With the capability of supplying 400W using free air convection alone, it is perfectly suitable for fanless
usage; by applying 23.5CFM of system forced air, an even higher output of 500W can be obtained. With 6.2W/ in3
of high power density, USP-500 series is a compact 90~264V switcher that is ideal for 1U (1.75-inch) installations.
Page 140
Avanti Power Repairs Ltd
HRP-600 Series - 600W Single Output AC-DC Power Supply with PFC
Applications
General electronics
Factory automation
Moving signs
Test and measurement equipment
Features
Universal AC input
Built-in active PFC function, PF>0.95
High efficiency up to 89% (typ.)
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Built-in constant current limiting circuit
Built-in cooling Fan ON-OFF control (load)
Built-in remote sense function
All using 105°C long life electrolytic capacitors
Model No
HRP-600-3-3
HRP-600-5
HRP-600-7-5
HRP-600-12
HRP-600-15
HRP-600-24
HRP-600-36
HRP-600-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (Amps)
120A
120A
80A
53A
43A
27A
18A
13A
Power (Watts)
396W
600W
600W
636W
645W
648W
630W
624W
R&N (mV)
80mV
80mV
80mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
79%
82%
87%
88%
88%
88%
89%
89%
Description
HRP-600 Series are 600W AC/DC enclosed type power supplies with PFC function that fulfil the requirement of
EN61000-3-2 for harmonic current with high operating efficiency and low no load power consumption. Standard
functions of HRP-600 include 300VAC input surge immunity for 5 seconds, remote sense, DC OK signal, LED
indicator, heavy industry level of EMS immunity(EN61000-6-2), and protection for short-circuit, overload (constant
current limiting), over voltage, and over temperature.
Page 141
Avanti Power Repairs Ltd
SPV-600 Series - 600W Single Output AC-DC Enclosed Power Supply with PFC Function
Features
Universal Ac input/Full range
Built-in PFC Function
Protections: Short Circuit/Overload/Over Voltage/ Over
temperature
Forced air cooling by built-in DC fan
Output Voltage programmable from 20~110% by
1~5.5VDC external control signal
With DC OK signal output
Built-in remote ON-OFF control
Fixed switching frequency at PFC:88kHz PWM:100KHz
Model No
SPV-600-12
SPV-600-24
SPV-600-48
Voltage (Max)
12V
24V
48V
Current (Amps)
50A
25A
12.5A
Page 142
Power (Watts)
600W
600W
600W
R&N (mV)
240mV
240mV
300mV
Efficiency (%)
84%
86%
87%
Avanti Power Repairs Ltd
HRPG-600 Series - 600W Single Output & 5Vsb AC-DC PFC Power Supply
Applications
General electronics
Factory automation
Moving signs
Test and measurement equipment
Features
Universal AC input
Built-in active PFC function, PF>0.95
High efficiency up to 89% (typ.)
Short circuit, over load, over voltage, over temperature
protections
Withstand 300VAC surge input for 5 seconds
Built-in cooling Fan ON-OFF control (load)
DC OK signal output
Stand by 5V@0.3A
Built in remote ON-OFF control
Built-in remote sense function
No load power consumption <0.75W
Model No
HRPG-600-3-3
HRPG-600-5
HRPG-600-7-5
HRPG-600-12
HRPG-600-15
HRPG-600-24
HRPG-600-36
HRPG-600-48
Voltage (Max)
3.3V
5V
8V
12V
15V
24V
36V
48V
Current (Amps)
120A
120A
80A
53A
43A
27A
18A
13A
Power (Watts)
396W
600W
600W
636W
645W
648W
630W
624W
R&N (mV)
80mV
80mV
80mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
79%
82%
86%
88%
88%
88%
89%
89%
Description
HRPG-600 Series are 600W AC/DC enclosed type power supplies with PFC function that fulfil the requirement of
EN61000-3-2 for harmonic current with high operating efficiency and low no load power consumption. Other
standard functions of HRPG-600 include 300VAC input surge immunity for 5 seconds, remote sense, DC OK
signal, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and protection for short-circuit,
overload (constant current limiting), over voltage, and over temperature. HRPG-600 Series are different to the
HPR-600's as they have additional remote ON/OFF control and 5V/0.3A standby output.
Page 143
Avanti Power Repairs Ltd
HEP-600 Series - 600W Single Output Harsh Environment Enclosed Power Supplies
Applications
Humid and dusty industrial environments
Outdoor telecommunication equipment
No fan environment
Signboards or billboards
Features
Universal AC input / Full range (up to 264VAC)
Built-in active PFC function
No load power consumption <0.5W at remote OFF
High efficiency up to 96%
Aluminium case and fully potted with heat-conducted
silicone
-40 to +70C wide operating range
Withstand 5G vibration test
Short circuit, Over current, Over voltage, Over temperature
protections
Fanless design, cooling by free air convection
Output current and voltage adjustable through internal
potentiometer
LED indicator for power on
5 years warranty on approved installations
Model No
HEP-600-12
HEP-600-15
HEP-600-20
HEP-600-24
HEP-600-30
HEP-600-36
HEP-600-42
HEP-600-48
HEP-600-54
Voltage (Max)
12V
15V
20V
24V
30V
36V
42V
48V
54V
Current (Amps)
40A
36A
28A
25A
20A
16.7A
14.3A
12.5A
11.2A
Power (Watts)
480W
540W
560W
600W
600W
601.2W
600.6W
600W
604.8W
R&N (mV)
150mV
150mV
150mV
150mV
200mV
250mV
250mV
250mV
350mV
Efficiency (%)
93%
94%
95%
95%
95.5%
95.5%
96%
96%
96%
Description
HEP-600 series is a high-efficiency and waterproof AC-to-DC industrial power supply with power up to 600Watts,
fully potted by silicone and enclosed within an aluminium case. HEP-600 works outstandingly with electronics under
harsh environments such as fan-less, high-vibration, dusty, humid, and oily conditions. Its remarkable features
include supreme efficiency up to 96%, low no-load power consumption (<0.5Watt) at remote OFF, and wide
working temperature ranges between -40 and +70C.
Page 144
Avanti Power Repairs Ltd
HLG-600H-A Series - 600W Single Output IP65 Rated Enclosed Power Supplies
Applications
LED street lighting
LED High bay lighting
Parking space lighting
LED searchlight
LED fishing lamp
Features
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
No load power consumption <0.5W at remote OFF
High efficiency up to 96%
-40℃ ~ +70℃ wide operating range
Short circuit, over current, over voltage & over temperature
protections
Fanless design, cooling by free air convection
IP65 design for indoor or outdoor installations
Withstand 5G vibration test
LED indicator for power on
Suitable for dry, damp or wet location
5 years warranty on approved installs
Model No
HLG-600H-12A
HLG-600H-15A
HLG-600H-20A
HLG-600H-24A
HLG-600H-30A
HLG-600H-36A
HLG-600H-42A
HLG-600H-48A
HLG-600H-54A
Voltage (Max)
12V
15V
20V
24V
30V
36V
42V
48V
54V
Current (Amps)
40A
36A
28A
25A
20A
16.7A
14.3A
12.5A
11.2A
Power (Watts)
480W
540W
560W
600W
600W
601.2W
600.6W
600W
604.8W
R&N (mV)
150mV
150mV
150mV
150mV
200mV
250mV
250mV
250mV
350mV
Efficiency (%)
92%
93.5%
94.5%
95%
95%
95.5%
96%
96%
96%
Description
HLG-600H-A series is a high performance dustproof and waterproof, to IP65 ingress protection ratings, AC-to-DC
LED power supply. Capable of power up to 600Watts and delivering efficiency up to 96% the range tops the LED
power supply field. Other features include the wide working temperature range between -40 and +70, fan-less
design, adjustable output voltage and current, surge susceptibility up to 4KV (EN61000-4-5), low no-load power
consumption (<0.5Watt) at remote OFF and workable at 277VAC input. These attributes, along with the fullypotted silicone and aluminium case, all make HLG-600H-A fit for indoor/outdoor LED lighting applications
requiring remarkable reliability
Page 145
Avanti Power Repairs Ltd
HLG-600H-B Series - 600W Single Output IP67 Rated Dimmable Power Supplies
Applications
LED street lighting
LED High bay lighting
Parking space lighting
LED searchlight
LED fishing lamp
Features
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
No load power consumption <0.5W at remote OF
High efficiency up to 96%
-40℃ ~ +70℃ wide operating range
Short circuit, over current, over voltage & over temperature
protections
Fanless design, cooling by free air convection
IP67 design for indoor or outdoor installations
Withstand 5G vibration test
Three in one dimming function - 0~10Vdc or PWM signal or
resistive
Suitable for dry, damp or wet location
5 years warranty on approved installs
Model No
HLG-600H-12B
HLG-600H-15B
HLG-600H-20B
HLG-600H-24B
HLG-600H-30B
HLG-600H-36B
HLG-600H-42B
HLG-600H-48B
HLG-600H-54B
Voltage (Max)
12V
15V
20V
24V
30V
36V
42V
48V
54V
Current (Amps)
40A
36A
28A
25A
20A
16.7A
14.3A
12.5A
11.2A
Power (Watts)
480W
540W
560W
600W
600W
601.2W
600.6W
600W
604.8W
R&N (mV)
150mV
150mV
150mV
150mV
200mV
250mV
250mV
250mV
350mV
Efficiency (%)
92%
93.5%
94.5%
95%
95%
95.5%
96%
96%
96%
Description
HLG-600H-B series is a high performance dustproof and waterproof AC-to-DC LED power supply with power up
to 600Watts and three in one dimming function. The fully-potted silicone and aluminium case facilitate heat
dissipation allowing the fanless design and helping to deliver efficiency up to 96%, topping that of others in the LED
power supply field. Other features include wide working temperature range between -40 and +70, adjustable output
voltage and current, EN61000-4-5 compliant surge susceptibility up to 4KV, <0.5Watt low no-load power
consumption at remote OFF and the ability to work at 277VAC input. These attributes all make HLG-600H-B fit
for indoor/outdoor LED lighting applications requiring remarkable reliability and dimming capabilities.
Page 146
Avanti Power Repairs Ltd
MSP-600 Series - 600W Single Output Medical Enclosed Power Supplies
Applications
Medical equipment
Chemical detection equipment
Biological detection equipment
Analysis facilities
Features
Universal AC input 85-264VAC
No load power consumption <0.8W
Low leakage current <300μA @ 264VAC
Built-in active PFC function, PF>0.94
High efficiency up to 89%
Built-in constant current limiting circuit
Built-in remote sense function
DC OK signal
Built-in remote ON/OFF control & 5V/0.3A standby output
Parallel function for MSP-600-24/36/48
Withstand 300VAC surge for 5 seconds
Model No
MSP-600-3-3
MSP-600-5
MSP-600-7-5
MSP-600-12
MSP-600-15
MSP-600-24
MSP-600-36
MSP-600-48
Voltage (Max)
3.3V
5V
7.5V
12V
15V
24V
36V
48V
Current (Amps)
120A
120A
80A
53A
43A
27A
17.5A
13A
Power (Watts)
396W
600W
600W
636W
645W
648W
630W
624W
R&N (mV)
100mV
100mV
100mV
120mV
150mV
150mV
200mV
240mV
Efficiency (%)
78.5%
82%
86%
88%
88%
88%
89%
89%
Description
MSP-600 Series is a range of 600W medical safety regulation compliant (MOOP level) enclosed power supplies
with low leakage current. Featuring 85-264VAC input the range is available in output voltages of 3.3V to 48V and
possesses up to 89% high efficiency. Standard functions of MSP-600 Series include protections for short circuit,
overload, over voltage, and over temperature, 300VAC input surge immunity for 5 seconds, remote ON/OFF
control, remote sense, fan ON/OFF control, and DC OK signal output. To meet with requirements of higher wattage
applications the 24V, 36V & 48V models are equipped with a parallel function where up to 4 units can be operated
in parallel.
Page 147
Avanti Power Repairs Ltd
PSP-600 Series - 600W Parallel Output PFC Function Power Supply
Applications
Test & measurement equipment
General electronic machinery
Features
Universal AC input / Full range
Built in active PFC function
Protections: Short circuit/Over load/Over voltage/Over
temperature
Forced air cooling by built-in DC fan
With DC OK Signal output
Current sharing up to 2400W(3+1)
Built-in remote ON-OFF control
Built-in remote sense function
Fixed switching frequency at PFC:88KHz PWM:100KHz
Model No
PSP-600-5
PSP-600-12
PSP-600-13-5
PSP-600-15
PSP-600-24
PSP-600-27
PSP-600-48
Voltage (Max)
5V
12V
14V
15V
24V
27V
48V
Current (Amps)
80A
50A
44.5A
40A
25A
22.2A
12.5A
Power (Watts)
400W
600W
600W
600W
600W
600W
600W
R&N (mV)
180mV
240mV
240mV
240mV
240mV
240mV
300mV
Efficiency (%)
79%
84%
85%
85%
86%
86%
87%
Description
The PSP-600 Series is a 600W parallel output enclosed power supply with PFC function. Protections including short
circuit, over load, over voltage and over temperature. Forced air cooling by built-in DC fan allows an operating
temperature of -20~+60°C. With a fixed switching frequency at PFC: 88KHz, PWM: 100KHz enabling designs to
avoid interference with system clock frequencies.
Page 148
Avanti Power Repairs Ltd
MP650 Series - 650W Modular Power Supply
Features
Universal input voltage
Uses ZVS technology to reduce power dissipation and
improve efficiency
Large range of output configurations available
Remote control on each module
Remote sense on MS-75, 150 & 300 modules
Built in active PFC, PF>0.95
Built in parallel function on MS-300
Fan alarm function
Forced air cooling
MS-75 Series - 75W Single Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-75L
MS-75M
MS-75N
MS-75O
MS-75P
MS-75Q
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
15A
15A
0.63A
5A
3.2A
1.6A
Page 149
Power (Watts)
75W
75W
75W
75W
75W
75W
R&N (mV)
80mV
80mV
150mV
150mV
150mV
250mV
Avanti Power Repairs Ltd
MS-150 Series - 150W Single Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-150A
MS-150B
MS-150C
MS-150D
MS-150E
MS-150F
MS-150G
MS-150H
MS-150I
MS-150J
MS-150K
Voltage (Max)
2V
3.3V
5V
7.5V
12V
15V
18V
24V
27V
33V
48V
Current (Amps)
25A
25A
25A
18A
13A
10A
8.5A
6.5A
5.8A
4.7A
3.2A
Power (Watts)
150W
150W
150W
150W
150W
150W
150W
150W
150W
150W
150W
R&N (mV)
50mV
80mV
80mV
100mV
150mV
150mV
150mV
150mV
150mV
250mV
250mV
MS-300 Series - 300W Single Output parallel able 2 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-3002A
MS-3002B
MS-3002C
MS-3002D
MS-3002E
MS-3002F
MS-3002G
MS-3002H
MS-3002I
MS-3002J
MS-3002K
Voltage (Max)
2V
3.3V
5V
7.5V
12V
15V
18V
24V
27V
33V
48V
Current (Amps)
50A
50A
50A
40A
25A
20A
16.7A
12.5A
11.2A
9.1A
6.3A
Page 150
Power (Watts)
300W
300W
300W
300W
300W
300W
300W
300W
300W
300W
300W
R&N (mV)
80mV
80mV
80mV
100mV
150mV
150mV
150mV
150mV
200mV
250mV
300mV
Avanti Power Repairs Ltd
MD-100 Series - 100W Dual Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MD-100R
MD-100S
MD-100T
MD-100U
MD-100V
MD-100W
MD-100X
Voltage (Max)
5V
5V
5V
12V
5V
10V
24V
5V
24V
12V
12V
12V
15V
15V
Current (Amps)
10A
8A
10A
5.8A
15A
4.7A
3A
10A
3A
4.7A
5A
5.8A
4.7A
4.7A
Power (Watts)
90W
90W
100.4W
100.4W
101W
101W
100W
100W
100.8W
100.8W
100.8W
100.8W
100.5W
100.5W
R&N (mV)
100mV
100mV
100mV
150mV
100mV
150mV
200mV
100mV
240mV
120mV
120mV
120mV
150mV
150mV
Description
Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules.
Using zero voltage switching technology to realize the power factor correction, the line input is rectified into
high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating
voltage into all kinds of DC output voltages from 1.6V to 53V. There are currently 75W, 150W, 300W single
output modules and 100W dual output modules to fulfil all kinds of applications up to 14 isolated outputs.
There are millions of combinations available for the modular series. You can configure the DC outputs needed
to get the fastest solution for your power requirements with safety and EMC certificates. No more NRE/safety
application charges and long periods of waiting for certificates to come through! This is a revolutionary
standard power solution that fulfils your custom made request!
Page 151
Avanti Power Repairs Ltd
RSP-750 Series - 750W Single Output 1U low profile Enclosed Power Supply
Applications
General industrial control system
IC testing equipment
Instrumentation
Telecom
Data storage
Laser-carving machine
Charging system
Features
Universal AC input/Full range
AC input active surge current limiting
High efficiency up to 92%
Built-in 12V/0.1A auxiliary power
Built-in active PFC function, PF>0.97
Protections: Short circuit/Overload/Over voltage/Over
temperature/Fan alarm
Output voltage can be trimmed between 40~110% of the
rated output voltage
Output OLP can be trimmed between 40~110% of the rated
output current
Forced air cooling by built-in DC fan
High power density 9.5W/inch³
1U low profile 41mm
DC OK signal
Built-in remote ON-OFF control
Built-in remote sense function
Model No
RSP-750-5
RSP-750-12
RSP-750-15
RSP-750-24
RSP-750-27
RSP-750-48
Voltage (Max)
5V
12V
15V
24V
27V
48V
Current (Amps)
100A
62.5A
50A
31.3A
27.8A
15.7A
Power (Watts)
500W
750W
750W
751.2W
750.6W
753.6W
R&N (mV)
150mV
150mV
150mV
150mV
150mV
150mV
Efficiency (%)
82%
87%
89%
91%
91%
92%
Description
The RSP-750 series is a 1U low profile enclosed type power supply, featuring 9.44W/inch³ of high power density.
Suitable for industrial equipments with limitations on space due to its high operating temperature of -30~+50°C with
cooling by the built-in DC fan and its small size. Standard functions include remote sense, remote ON/OFF control,
12V/0.1A auxiliary output and DC OK alarm signal output (TTL signal).
Page 152
Avanti Power Repairs Ltd
SP-750 Series - 750W AC-DC Active PFC Single Output Power Supply
Applications
Industrial automation
Moving sign
Electronic equipment
Instrumentation
Features
Universal AC input/Full range
AC input active surge current limiting
Built-in active PFC function, PF>0.95
Protections: Short circuit, overload, over voltage, over
temperature
Forced air cooling by built-in DC ball bearing fan
High power density 5.48/inch
Built-in constant current limiting circuit
With power good and fail signal output
Built-in remote ON-OFF control
Built-in remote sense function
Model No
SP-750-5
SP-750-12
SP-750-15
SP-750-24
SP-750-27
SP-750-48
Voltage (Max)
5V
12V
15V
24V
27V
48V
Current (Amps)
120A
62.5A
50A
31.3A
28A
16A
Power (Watts)
600W
750W
750W
751.2W
751W
754W
R&N (mV)
120mV
120mV
120mV
120mV
120mV
120mV
Efficiency (%)
81%
86%
87%
89%
89%
90%
Description
The SP-750 series is a 750W AC-DC single output enclosed power supply with active PFC function. Protections
including short circuit, overload, over voltage and over temperature. Forced air cooling by built-in Dc ball bearing
fan.
Page 153
Avanti Power Repairs Ltd
SPS-750P - 750W Single Output Enclosed Power Supply with PFC
Features
Universal AC input with active power factor correction,
PF>0.95
High reliability and high efficiency up to 90%
Constant current design suits for inductive load and
capacitive load
Inrush current limit soft start function
Over voltage, Over Load and Short Circuit, Over
Temperature Protection
Output voltage ±10% adjustment
Output voltage remote sense & remote control ON/OFF
Power good signal output
Current sharing function, 2+1 up to 2250W
Built-in 12V/0.1A auxiliary output
UL, cUL, TUv, CB, CE approved
Model No
SPS-750P-05
SPS-750P-12
SPS-750P-15
SPS-750P-24
SPS-750P-30
SPS-750P-36
SPS-750P-48
Voltage (Max)
5V
12V
15V
24V
30V
36V
48V
Current (Amps)
120A
62.5A
50A
31.3A
25A
21A
16A
Page 154
Power (Watts)
600W
750W
750W
751W
750W
756W
758W
R&N (mV)
120mV
120mV
120mV
200mV
200mV
220mV
240mV
Efficiency (%)
80%
88%
88%
88%
89%
89%
90%
Avanti Power Repairs Ltd
MP1K0 Series - 1000W Modular Power Power Supply
Features
Universal input voltage
Uses ZVS technology to reduce power dissipation and
improve efficiency
Large range of output configurations available
Remote control on each module
Remote sense on MS-75, 150 & 300 modules
Built in active PFC, PF>0.95
Built in parallel function on MS-300
Fan alarm function
Forced air cooling
MS-75 Series - 75W Single Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-75L
MS-75M
MS-75N
MS-75O
MS-75P
MS-75Q
Voltage (Max)
3.3V
5V
12V
15V
24V
48V
Current (Amps)
15A
15A
0.63A
5A
3.2A
1.6A
Page 155
Power (Watts)
75W
75W
75W
75W
75W
75W
R&N (mV)
80mV
80mV
150mV
150mV
150mV
250mV
Avanti Power Repairs Ltd
MS-150 Series - 150W Single Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-150A
MS-150B
MS-150C
MS-150D
MS-150E
MS-150F
MS-150G
MS-150H
MS-150I
MS-150J
MS-150K
Voltage (Max)
2V
3.3V
5V
7.5V
12V
15V
18V
24V
27V
33V
48V
Current (Amps)
25A
25A
25A
18A
13A
10A
8.5A
6.5A
5.8A
4.7A
3.2A
Power (Watts)
150W
150W
150W
150W
150W
150W
150W
150W
150W
150W
150W
R&N (mV)
50mV
80mV
80mV
100mV
150mV
150mV
150mV
150mV
150mV
250mV
250mV
MS-300 Series - 300W Single Output parallel able 2 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MS-3002A
MS-3002B
MS-3002C
MS-3002D
MS-3002E
MS-3002F
MS-3002G
MS-3002H
MS-3002I
MS-3002J
MS-3002K
Voltage (Max)
2V
3.3V
5V
7.5V
12V
15V
18V
24V
27V
33V
48V
Current (Amps)
50A
50A
50A
40A
25A
20A
16.7A
12.5A
11.2A
9.1A
6.3A
Page 156
Power (Watts)
300W
300W
300W
300W
300W
300W
300W
300W
300W
300W
300W
R&N (mV)
80mV
80mV
80mV
100mV
150mV
150mV
150mV
150mV
200mV
250mV
300mV
Avanti Power Repairs Ltd
MD-100 Series - 100W Dual Output 1 Slot Modular Power Supplies
Features
For installation in MP450, MP650 & MP1K0 Modules
Model No
MD-100R
MD-100S
MD-100T
MD-100U
MD-100V
MD-100W
MD-100X
Voltage (Max)
5V
5V
5V
12V
5V
10V
24V
5V
24V
12V
12V
12V
15V
15V
Current (Amps)
10A
8A
10A
5.8A
15A
4.7A
3A
10A
3A
4.7A
5A
5.8A
4.7A
4.7A
Power (Watts)
90W
90W
100.4W
100.4W
101W
101W
100W
100W
100.8W
100.8W
100.8W
100.8W
100.5W
100.5W
R&N (mV)
100mV
100mV
100mV
150mV
100mV
150mV
200mV
100mV
240mV
120mV
120mV
120mV
150mV
150m
Description
Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules.
Using zero voltage switching technology to realize the power factor correction, the line input is rectified into
high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating
voltage into all kinds of DC output voltages from 1.6V to 53V. There are currently 75W, 150W, 300W single
output modules and 100W dual output modules to fulfil all kinds of applications up to 14 isolated outputs.
There are millions of combinations available for the modular series. You can configure the DC outputs needed
to get the fastest solution for your power requirements with safety and EMC certificates. No more NRE/safety
application charges and long periods of waiting for certificates to come through! This is a revolutionary
standard power solution that fulfils your custom made request!
Page 157
Avanti Power Repairs Ltd
RSP-1000 Series - 1000W PFC Parallel Function Enclosed Power Supply
Applications
Front end power systems
Factory Automation
Instrumentation
Moving Signs
Telecommunications
Data Communications
Charging Lockers
Features
Universal AC input
1U low profile
High power density 10.67/in3
Built in Active PFC circuit
Short circuit, over load, over voltage & over temperature
protections
Built in ON/OFF control and remote sense
Trimable output voltages
DC OK signal output
Built in active current sharing
High efficiency up to 90%
Built in 5V/0.5A auxiliary output
Model No
RSP-1000-12
RSP-1000-15
RSP-1000-24
RSP-1000-27
RSP-1000-48
Voltage (Max)
12V
15V
24V
27V
48V
Current (Amps)
60A
50A
40A
37A
21A
Power (Watts)
720W
750W
960W
999W
1008W
R&N (mV)
150mV
150mV
150mV
150mV
150mV
Efficiency (%)
84%
86%
89%
89%
90%
Description
With power factor correction and parallel function this series targets 1U low profile and high wattage applications.
Featuring 10.67W/in3 extremely high power density RSP-1000 series can provide rated output wattage even at
100VAC input because of its high efficiency design. With built in trimming function the output voltage can be
adjusted between 40% and 110% rated value by adding an external voltage source or resistors. Other standard
features include remote sense, remote ON/OFF control, 5V/0.5A auxiliary output and DC OK signal. Using constant
current limiting as the overload protection makes it a suitable unit for capacitive/inductive loads and if you need
more power the built in active current sharing function allows up to 3 units to be connected in parallel.
Page 158
Avanti Power Repairs Ltd
SPS-1000P Series - 1000W Single Output AC/DC PFC Enclosed Power Supply
Applications
Automatic control systems
General electronic systems
Features
Universal AC input with active power factor correction,
P.F.>0.95
Inrush current limit soft start function
Over voltage, over load, short circuit protection
Over temperature protection
Output voltage ±10% adjustment
Output voltage remote sense & remote control ON/OFF
Power good signal output
Current sharing function, 3+1 up to 4KW
Forced air cooling by built in DC fan
Built in 5V/0.5A auxiliary output
1U low profile
UL, cUL, TUV, CB, CE standard
Model No
SPS-1000P-12
SPS-1000P-24
SPS-1000P-36
SPS-1000P-48
Voltage (Max)
12V
24V
36V
48V
Current (Amps)
63A
40A
28A
21A
Power (Watts)
756W
960W
1000W
1008W
R&N (mV)
150mV
150mV
240mV
240mV
Efficiency (%)
83%
87%
87%
88%
Description
SPS-1000P Series are 1000W single output power supplies with high efficiency and wide operating temperatures
from -20C to +70C. Standard features include remote control, remote sense, power good signal and over voltage,
over load, short circuit and over temperature protections. SPS-1000P also has current sharing function for parallel
use.
Page 159
Avanti Power Repairs Ltd
SPV-1500 Series - 1500W Single Output Enclosed Power Supply
Applications
LCD panel burn-in systems
IC testing equipment
Telecommunications
Data communications
Laser-carving machines
Factory automation
Battery charging
Features
Universal AC input/Full range
ZVS new technology
AC input active surge current limiting
Built-in active PFC function,PF>0.95
Short circuit, over load, over voltage, over temperature
protections
Forced air cooling by built-in DC ball bearing fan
High power density 8.3W/inch
Current sharing up to 4500W(2+1)
Alarm signal output
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
UL, cUL, TUV, CB, CE Approvals
Model No
SPV-1500-12
SPV-1500-24
SPV-1500-48
Voltage (Max)
12V
24V
48V
Current (Amps)
125A
63A
32A
Power (Watts)
1500W
1512W
1536W
R&N (mV)
150mV
150mV
200mV
Efficiency (%)
86.5%
90%
90%
Description
1500W single output ac/dc enclosed power supplies with parallel function and programmable output voltage
function. SPV-1500 Series are a high reliability range of enclosed power supplies with high efficiency up to 90% and
high power density 8.3W/in3. Built-in parallel function (2+1) enabling total wattages up to 4500W, remote ON/OFF
control and remote sense function, Alarm signal output & Built-in 12V/0.1A auxiliary output are other notable
features of SPV-1500.
Page 160
Avanti Power Repairs Ltd
RSP-1500 Series - 1500W Parallel Output PFC Function Power Supply
Applications
Front end power systems
Factory automation
Instrumentation
Moving signs
Telecommunications
Data communications
Features
Universal AC input
ZVS new technology
AC input active surge current limiting
High efficiency up to 91%
Built in active PFC function,PF>0.95
Forced air cooling by built-in DC fan
Output voltage can be trimmed between 70~100% of the
rated output voltage
High power density 8.3W/inch³
Current sharing up to 6000W(3+1)
Alarm signal output
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
Model No
RSP-1500-5
RSP-1500-12
RSP-1500-15
RSP-1500-24
RSP-1500-27
RSP-1500-48
Voltage (Max)
5V
12V
15V
24V
27V
48V
Current (Amps)
240A
125A
100A
63A
56A
32A
Power (Watts)
1200W
1500W
1500W
1512W
1512W
1536W
R&N (mV)
150mV
150mV
150mV
150mV
150mV
200mV
Efficiency (%)
80%
87%
87%
90%
90%
91%
Description
With power factor correction and parallel function this series targets 1U low profile and high wattage applications.
Featuring 8.3W/in3 extremely high power density RSP-1500 series can provide rated output wattage even at
100VAC input because of its high efficiency design. With built in trimming function the output voltage can be
adjusted between 70% and 100% rated value by adding an external voltage source or resistors. Other standard
features include remote sense, remote ON/OFF control, 12V/0.1A auxiliary output and DC OK signal. Using
constant current limiting as the overload protection makes it a suitable unit for capacitive/inductive loads and if you
need more power the built in active current sharing function allows up to 3 units to be connected in parallel.
Page 161
Avanti Power Repairs Ltd
RSP-2000 Series - 2000W Single Output Enclosed Power Supply
Features
Universal AC input/Full range
Ac input active surge current limiting
Built-in 5V/0.3A, 12V/0.8A auxiliary power
Built-in active PFC function, PF>0.98
Protections: Short circuit/Overload/Over voltage/Over
temperature
Output voltage can be trimmed between 20~110% of the
rated output voltage
Forced air cooling by built-in DC fan
High power density 21.4W/inch³
1U low profile 41mm
Active current sharing
DC OK signal
Built-in remote ON-OFF control
Built-in remote sense function
Model No
RSP-2000-12
RSP-2000-24
RSP-2000-48
Voltage (Max)
12V
24V
48V
Current (Amps)
100A
80A
42A
Power (Watts)
1200W
1920W
2016W
R&N (mV)
150mV
200mV
300mV
Efficiency (%)
86%
80.5%
92%
Description
Offering up to 2000W of regulated DC output voltages from 12~48V and parallel capability up to 6KW; the new
range of universal input high power RSP-2000. With a high power density of 21.4W/inch³ these small footprint
modules lead the way in high power switching technology.
Page 162
Avanti Power Repairs Ltd
RSP-2400 Series - 2400W AC/DC Enclosed Parallel Power Supply
Applications
LCD panel burn-in systems
IC testing equipment
Instrumentation
Telecommunications
Data communications
Laser-carving machines
Factory automation
Battery charging
Features
AC input 180 ~ 264VAC
AC input active surge current limiting
High efficiency up to 91%
Built-in active PFC function,PF>0.95
Short circuit, over load, over voltage, over temperature,
Fan Alarm protections
Forced air cooling by built-in DC with fan speed control
function
Output voltage can be trimmed between 20~110% of the
rated output voltage
High power density 12.5W/inch
Current sharing up to 2 units
Alarm signal output (relay contact and TTL signal)
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
Model No
RSP-2400-12
RSP-2400-24
RSP-2400-48
Voltage (Max)
12V
24V
48V
Current (Amps)
167A
100A
50A
Power (Watts)
2000.4W
2400W
2400W
R&N (mV)
150mV
150mV
200mV
Efficiency (%)
87%
90%
92%
Description
RSP-2400 is a 2400W enclosed switching power supply with power factor correction (PFC) function. Featuring
12.5W/ in3 of extreme high power density, full output power up to 50℃ and output voltages that can be adjusted
from 20% to 110% rated voltage by adding 1~5.5V of external control voltage, which provide users great flexibility
for their system design. Other standard features include remote sense, remote ON/OFF control, 12V/0.1A auxiliary
output, and alarm signal output (both relay and TTL signal), RSP-2400 series use constant current limiting plus
delay shutdownۥ as the overload protection which enable the unit to power capacitive/inductive load and still
provide full protection for customers system.
Page 163
Avanti Power Repairs Ltd
RSP-3000 Series - 3000W AC/DC Enclosed Parallel Power Supply
Applications
Front-end power systems
Factory automation
Instrumentation
Moving signs
Telecom/datacom's
Laser-carving machines
IC testing equipment
LCD panel burn-in systems
Battery charging
Features
180~264VAC input
AC input active surge current limiting
High efficiency up to 90%
Built-in active PFC function,PF>0.95
Short circuit, over load, over voltage, over temperature,
Fan Alarm protections
Forced air cooling by built-in DC with fan speed control
function
Output voltage can be trimmed between 20~110% of the
rated output voltage
High power density 15.6W/inch
Current sharing up to 3 units
Alarm signal output
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
Model No
RSP-3000-12
RSP-3000-24
RSP-3000-48
Voltage (Max)
12V
24V
48V
Current (Amps)
200A
125A
62.5A
Power (Watts)
2400W
3000W
3000W
R&N (mV)
150mV
150mV
200mV
Efficiency (%)
86%
90%
90.5%
Description
RSP-3000 is a 3000W enclosed switching power supply with power factor correction (PFC) function. Featuring
15.6W/ in3 of extreme high power density, full output power up to 50℃ and output voltages that can be adjusted
from 20% to 110% rated voltage by adding 1~5.5V of external control voltage, which provide users great flexibility
for their system design. Other standard features include remote sense, remote ON/OFF control, 12V/0.1A auxiliary
output, and alarm signal output (both relay and TTL signal), RSP-3000 series use constant current limiting plus
delay shutdown as the overload protection which enable the unit to power capacitive/inductive load and still provide
full protection for customers system.
Page 164
Avanti Power Repairs Ltd
RST-5000 Series - 5000W Enclosed Power Supplies with PFC and Parallel Function
Applications
Fuel energy
Automation
Lasers
Telecommunications
Battery charging
Features
3 Phase 3 wire △ AC 196 ~ 305V or 3 Phase 4 wire Y AC
340 ~ 530V wide range input
High efficiency up to 91%
Built-in active PFC function
Short circuit, Overload, Over voltage, Over temperature, Fan
fail protections
Forced air cooling by built-in DC with fan speed control
function
Output voltage can be trimmed between 20~110% of the
rated output voltage
Output current can be adjusted between 20~100% of the
rated output current
Current sharing up to 3 units
Alarm signal output (relay contact and open collector signal):
AC fail, DC OK, fan fail, OTP
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
5 years warranty
Model No
RST-5000-24
RST-5000-48
Voltage (Max)
24V
48V
Current (Amps)
200A
105A
Power (Watts)
4800W
5040W
R&N (mV)
150mV
200mV
Efficiency (%)
89%
91%
Description
RST-5000 Series is a 5000W enclosed power supply with PFC and parallel function. The units can use either
196~305V or 340~550VAC three phase input and up to 3 units can be connected in parallel for current sharing.
Other features include adjustable output voltage and current, forced air cooling, with fan speed control function and
alarm signal outputs for AC fail, DC OK, fan fail and OTP.
Page 165
Avanti Power Repairs Ltd
RST-10000 Series - 10000W Enclosed Power Supplies with Parallel Function and PFC
Applications
Industrial control equipment
Automation equipment
Laser engravers
Telecommunication systems
Features
3 Phase 3 wire △ AC 196 ~ 305V or 3 Phase 4 wire Y AC
340 ~ 530V wide range input
High efficiency up to 91%
Built-in active PFC function
Short circuit, Over load, Over voltage, Over temperature,
Fan fail protections
Forced air cooling by built-in DC with fan speed control
function
Output voltage can be trimmed between 20~110% of the
rated output voltage by 1-6VDC external control signal
Output current can be adjusted between 20~100% of the
rated output current by 1-5VDC external control signal
Current sharing up to 2 units
Alarm signal output (relay contact and open collector signal):
AC fail, DC OK, fan fail, OTP
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
5 years warranty
Model No
RST-10000-24
RST-10000-36
RST-10000-48
Voltage (Max)
24V
36V
48V
Current (Amps)
400A
276A
210A
Power (Watts)
9600W
9936W
10080W
R&N (mV)
150mV
200mV
200mV
Efficiency (%)
89%
90%
91%
Description
RST-10000 Series are 10000W single output AC/DC power supplies with wide range 3 phase AC input and output
voltage options of 24VDC, 36VDC and 24VDC. RST-10000 have wide range, external control signal, voltage and
current adjustment functions and two over load protection mechanisms in the form of continuous constant current
limiting mode and constant current limiting with delay shutdown after 5 seconds mode; increasing the flexibility in its
within high power system design.
RST-10000 Series have built-in active PFC function and working efficiency up to 91%; the built-in fan enables the
series to supply full load output at ambient temperatures fewer than 50°C. The Parallel function is built in to allow 2
units to be connected and supply an even higher power output. Other functions include remote sense function,
12V/0.1A auxiliary power, alarm signal output for AC fail, DC OK, fain fail and over temperature protections.
Page 166
AVANTI POWER REPAIRS LTD
35A Rowan Road, Tadley
Hampshire, RG26 3RQ, England
Tel: +44 (0)1189-820 911
www.avantipowerrepairs.co.uk,
sales@avantipowerrepairs.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising