VCD MP3 CD Soundmachine AZ5155
AZ5155
VCD MP3 CD Soundmachine
all versions
VIDEO CD
TABLE OF CONTENTS
Handling Chip Components and Safety ..........................1 - 1
Technical Specification & Service tools...........................2 - 1
Service Measurement......................................................2 - 2
Connections and controls........................................3 - 1..3- 2
Instructions for Use ................................................3 - 3..3 - 8
Disassembly Diagram......................................................4 - 1
Pin-description of ICs .............................................4 - 2..4 - 3
Block Diagram .................................................................5 - 1
Wiring Diagram ................................................................6 - 1
Tuner Board
Circuit Diagram........................................................7 - 1
Layout Diagram .......................................................7 - 2
VCD Board And LCD Board And Karaoke Board
Circuit Diagram .......................................................8 - 1
Layout Diagram(LCD/Volume Board) .....................8 - 2
Layout Diagram(VCD Board) ..........................8 - 3..8-4
AF Board
Circuit Diagram........................................................9 - 1
Layout Diagram .......................................................9 - 2
Cassette Board
Circuit Diagram......................................................10 - 1
Layout Diagram .....................................................10 - 2
Exploded Views Diagram
Cabinet ..................................................................11 - 1
Tape Deck ............................................................11 - 2
Mechanical Partslist.......................................................11 - 1
Electrical Partslist ...............................................12 - 1..12 - 2
© Copyright
2003 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
CLASS 1
LASER PRODUCT
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
or otherwise without the prior permission of Philips.
Published by LX 0340Service Audio
Printed in The Netherlands
Subject to modification
© 3140 785 32660
1-1
HANDLING CHIP COMPONENTS
©
WARNING
ESD
All ICs and many other semiconductors are susceptible to
electrostatic discharges (ESD). Careless handling during
repair can reduce life drastically.
When repairing, make sure that you are connected with the
same potential as the mass of the set via a wristband with
resistance. Keep components and tools at this potential.
f
ATTENTION
Tous les IC et beaucoup d´autres semi-conducteurs sont
sensibles aux décharges statiques (ESD). Leur longévite
pourrait être considérablement écourtée par le fait qu´aucune
précaution nést prise à leur manipulation.
Lors de réparations, s´assurer de bien être relié au même
potentiel que la masse de l´appareil et enfileer le bracelet
serti d´une résistance de sécurité.
Veiller à ce que les composants ainsi que les outils que l´on
utilise soient également à ce potentiel.
d
WARNUNG
Alle ICs und viele andere Halbleiter sind empfindlich
gegenüber elektrostatischen Entladungen (ESD).
Unsorgfältige Behandlung im Reparaturfall kann die
Lebensdauer drastisch reduzieren.
Sorgen Sie dafür, daß Sie im Reparaturfall über ein Pulsarmband mit Widerstand mit dem Massepotential des
Gerätes verbunden sind.
Halten Sie Bauteile und Hilfsmittel ebenfalls auf diesem
Potential.
SAFETY
©
Safety regulations require that the set be restored to its
original condition and that parts which are identical with
those specified be used.
Safety components are marked by the symbol
WAARSCHUWING
Alle IC´s en vele andere halfgeleiders zijn gevoelig voor
electrostatische ontladingen (ESD).
Onzorgvuldig behandelen tijdens reparatie kan de levensduur
drastisch doen vermindern. Zorg ervoor dat u tijdens reparatie
via een polsband met weerstand verbonden bent met hetzelfde
potentiaal als de massa van het apparaat.
Houd componenten en hulpmiddelen ook op ditzelfde potentiaal.
i
AVVERTIMENTO
Tutti IC e parecchi semi-conduttori sono sensibili alle scariche
statiche (ESD).
La loro longevità potrebbe essere fortemente ridatta in caso di
non osservazione della più grande cauzione alla loro
manipolazione. Durante le riparationi occorre quindi essere
collegato allo stesso potenziale che quello della massa
delápparecchio tramite un braccialetto a resistenza.
Assicurarsi che i componenti e anche gli utensili con quali si
lavora siano anche a questo potenziale.
ñ
Veiligheidsbepalingen vereisen, dat het apparaat in zijn
oorspronkeliijke toestand wordt teruggebracht en dat
onderdelen, identiek aan de gespecificeerde, worden toegepast.
De Veiligheidsonderdelen zijn aangeduid met het symbool
f
i
Les normes de sécurité exigent que l`appareil soit remis
à l`état d`origine et que soient utilisées les pièces de
rechange identiques à celles spécifiées.
Les composants de sécurité sont marqués
©
ñ
DANGER: Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
Le norme di sicurezza estigono che l´apparecchio venga
rimesso nelle condizioni originali e che siano utilizzati i
Bei jeder Reparatur sind die geltenden Sicherheitsvorpezzi di ricambiago identici a quelli specificati.
schriften zu beachten. Der Originalzustand des Gerätes
Componenty di sicurezza sono marcati con
darf nicht verändert werden. Für Reparaturen sind Originalersatzteile zu verwenden.
Sicherheitsbauteile sind durch das Symbol
markiert.
d
CLASS 1
LASER PRODUCT
s Varning !
Osynlig laserstrålning när apparaten är öppnad och
spärren är urkopplad. Betrakta ej strålen.
©
After servicing and before returning the set to customer
perform a leakage current measurement test from all
exposed metal parts to earth ground, to assure no
shock hazard exists.
The leakage current must not exceed 0.5mA.
∂ Advarsel !
ß Varoitus !
f
Usynlig laserstråling ved åbning når sikkerhedsafbrydere
er ude af funktion. Undgå udsaettelse for stråling.
Avatussa laitteessa ja suojalukituksen ohitettaessa olet alttiina
näkymättömälle laserisäteilylle. Älä katso säteeseen !
"Pour votre sécurite, ces documents doivent être utilisés par
des spécialistes agréés, seuls habilités à réparer votre
appareil en panne".
2-1
TECHNICAL SPECIFICATIONS
GENERAL
TUNER - AM SECTION
Mains voltage
Mains frequency
Battery
Power consumption
-/01 : 120/230 V
-/01 : 50 / 60 Hz
mains : 9 V (R20 x 6)
: 18W
AMPLIFIER
Output power
mains :
:
battery :
:
:
Speaker impedance
2
2
2
2
2
x 5 W(CD/Tape/FM)
x 4 W(AM)
x 5 W(CD/Tape/FM)
x 4 W(AM)
x 6 ohm
TUNER - FM SECTION
Tuning range
IF frequency
Sensitivity
Selectivity
IF rejection
Image rejection
:
:
:
:
:
:
87.5 - 108 MHz
10.7 MHz
< 15 dBµV at 26dB S/N
> 20 dB at ±300kHz
> 50 dB
> 20 dB
Tuning range
IF frequency
Sensitivity
Selectivity
IF rejection
Image rejection ratio
:
:
:
:
:
:
AUDIO CASSETTE RECORDER
Number of tracks
Tape speed
Wow & flutter
Fast wind/rewind C60
Frequency response
S/N ratio
:
:
:
:
P/B :
:
1 stereo
4.76 cm/sec +3/-2%
< 0.35 % JIS UWTD
< 130 sec.
125 - 8000 Hz
> 36 dB
COMPACT DISC
Frequency response
S/N ratio
Channel difference
Channel crosstalk
Shock resistance
:
:
1 kHz :
1 kHz :
± Z axis :
± X or Y axis :
SERVICE TOOLS
Audio signal disc SBC 429.......................................................................4822 397 30184
Playability test disc SBC 444...................................................................4822 397 30245
Test disc 5 (disc without errors ) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A .....................................................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30 dB level without “pause”) .....4822 397 30155
AVAILABLE ESD PROTECTION EQUIPMENT
anti-static table mat
526.5 - 1606.5 kHz
465 kHz ± 3 kHz
< 72 dBµV/m at 26dB
< 16 dB
> 25 dB
< 28 dB
large 1200x650x1.25mm
small 600x650x1.25m
anti-static wristband
connection box (3 press stud connections, 1MΩ)
extendible cable (2m, 2MΩ, to connect wristband to connection box)
connecting cable (3m, 2MΩ, to connect table mat to connection box)
earth cable (1MΩ, to connect any product to mat or to connection box)
KIT ESD3 (combining all 6 prior products - small table mat)
wristband tester
4822 466 10953
4822 466 10958
4822 395 10223
4822 320 11307
4822 320 11305
4822 320 11306
4822 320 11308
4822 310 10671
4822 344 13999
100 Hz - 10 kHz
> 57 dBA
< 2 dB
> 15 dB
5G
5G
2-2
SERVICE MEASUREMENT
Tuner SW
DUT
Aerial replacement
Capacitor
RF Generator
LF Voltmeter
e.g. PM2534
e.g. 7122 707 48001
R=50Ω
Ri=50Ω
e.g. PM5326
Bandpass
250Hz-15kHz
S/N and distortion meter
e.g. Sound Technology ST1700B
To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday«s cage.
Use a bandpass filter (or at least a high pass filter with 250Hz) to eliminate hum (50Hz, 100Hz).
Tuner AM (MW,LW)
DUT
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
RF Generator
e.g. PM5326
S/N and distortion meter
Ri=50Ω
e.g. Sound Technology ST1700B
Frame aerial
e.g. 7122 707 89001
To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday«s cage.
CD
Use Audio Signal Disc SBC429 4822 397 30184 (replaces test disc 3)
L.P.F. = 13 th order filter 4822 395 30204
Low pass filter 22kHz
DUT
L
R
S/N and distortion meter
e.g. Sound Technology ST1700B
LEVEL METER
e.g. Sennheiser UPM550
with FF-filter
2
8
7
6
1
STOP
PLAY¥PA
USE
VOL UM
DYNAMIC
ULTRA B
BASS
ST
INCRED IBL
SURR
UND
PA
E
E
STO
P-O
PE
9
US
N
RCH
RECORD
$
SEARCH
PLAY
0
CD MO
DE
SEA
5 43 2 1
%
!
^
@
FM
MHz
88
MW
MHz
92
MAINS V~
TUN ING
530
96
630
800
104
10
1000
8
16
1300
00
& *
100
#
)
(
@ TUNING - to tune to radio stations.
# Tuning dial pointer
RADIO:
9 CD/VCD Display - to show the CD/VCD/MP3CD functions and disc status.
0 PLAY/PAUSE 2; - To start or interrupt
CD/VCD/MP3-CD playback.
STOP 9 - to stop CD/VCD/MP3-CD playback.
CD MODE - to select a different play mode e.g.
SHUFFLE/REPEAT.
SEARCH § or § - to skip or search a passage
or a track.
! OPEN - to open / close the CD door.
CD PLAYER :
6PAUSE ; - to interrupt recording or playback.
STOP•OPEN 9 / - To stop the tape and to
open the cassette holder.
SEARCH 5 or 6 - to fast wind/rewind the
tape.
PLAY 1 - to start playback.
RECORD 0 - to start recording.
7REMOTE SENSOR - infrared sensor for
remote control
8 Cassette compartment
CASSETTE RECORDER :
1 Source selector :
FM, MW, CD/VCD, TAPE/OFF.- to select
source of sound/radio waveband, and also the
POWER OFF switch.
2 INCREDIBLE SURROUND - to create a
phenomenal surround sound stereo effect.
3 DYNAMIC BASS BOOST - for a more vivid
bass response.
4 VOLUME - to adjust volume level.
5 p – 3.5 mm stereo headphone socket
TOP AND FRONT PANEL(see figure 1)
Remote Control . . . . . . . . . . . . . . . . . . . .1 pc
Mains Cord . . . . . . . . . . . . . . . . . . . . . . .1 pc
Audio / Video Cable . . . . . . . . . . . . . . . .1 pc
SUPPLIED ACCESSORIES
CONTROLS
1 PBC (PLAYBACK CONTROL) - to switch on or
off PBC mode (for VCD version 2.0 only).
2 RETURN - to return to the previous MENU level
during playback (for VCD with PBC on).
3 VIEW - to scan through a VCD with 9 pictures
display on TV screen. Only when PBC mode is
switched off (for VCD operation only).
4 OSD - to switch on/off the on screen display on
the TV screen.
5 SLOW - to watch a VCD at a slower speed (for
VCD operation only).
6 RESUME - to resume playback in stop mode.
7 GOTO - to start playback at any chosen time on
the disc (for CD/VCD operation only and PBC
mode is off).
REMOTE CONTROL (see figure 4)
( KARAOKE 1 LEVEL / MIC
) KARAOKE 2 LEVEL / MIC
- to connect microphone jack.
- to adjust the mixing level for karaoke.
KARAOKE PANEL(see figure 3)
$ AUDIO / VIDEO SOCKET - to connect to a TV
set.
% Battery door - to open the battery
compartment.
^ Telescopic aerial - to improve FM reception.
& AC MAINS - Socket for mains lead.
* Voltage selector (some version only) - to
adjust to match the local voltage 110/220V
before plugging in the set.
BACK PANEL(see figure 2)
REMOTE CONTROL
3-1
CONNECTIONS AND CONTROLS
8 PROG
for CD/VCD/MP3-CD . . . to programme disc
tracks.
9 REPEAT
for MP3-CD . . . . . . . . to repeat a track, or
whole disc.
for CD/VCD . . . . . . . . to repeat a disc track or
the whole disc.
0 A - B - to playback a certain scene or passage
repeatedly (for CD/VCD operation only).
! ZOOM
for VCD only . . . . . . . to zoom in or zoom out
picture.
@ SHUFFLE - When in CD/VCD mode, press to
start or stop shuffle play mode.
# MIX/SEL - to select disc format (CD / MP3-CD)
in a mixed mode disc.
$ NTSC/PAL - to select the video output for
NTSC or PAL system.
% R/L/ST - to select channel left / channel right /
stereo sound, or to select a language in a
bilingual VCD.
^ DIGITS 0 - 9
for CD/VCD/MP3-CD - to select a
track number.
(numbers consisting more than 2 figures must
be keyed in within 2 seconds)
& PLAY/PAUSE 2;
- to start or interrupt playback.
* SEARCH 5 or 6 (for CD/VCD/MP3-CD)
- to search back or forward.
( ALBUM ¡ ™
for MP3-CD only . . . . to select previous / next
album
) TRACK § §
for MP3-CD only . . . . to select previous/next
title.
for CD/VCD . . . . . . . . to search backward/
forward track.
¡ STOP 9
- to stop playback or to clear a programme.
™
4
REW
FWD
MX / SEL
£
™ KEY+ / KEY- - to change the VCD key tone to
suit to your vocal range.
£ ECHO + / ECHO - - to adjust the VCD echo
level for karaoke after you inserted a
microphone.
REMOTE CONTROL
Playtime
approximate 9 hrs
approximate 45 minutes
Batteries contain chemical substances, so they should be disposed of properly
TV screen is disabled during CD / MP3-CD playing if your AZ5155 is battery
powered.
Notes :
– The battery supply is switched off when the set is connected to the mains.
3. Remove the batteries if they are exhausted or if they will not be
used for a long period.
– The incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to
burst. Therefore:
– Do not mix battery types, e.g. alkaline with zinc carbonate.
– When inserting new batteries, replace all at the same time.
– Remove the batteries if the set is not to be used for a long time.
2. Replace the compartment door, making sure the batteries are
firmly and correctly in place.
Remote control
Open the battery compartment and insert two batteries,
type AAA, R03 or UM4 (preferably alkaline).
1. Open the battery compartment and insert six batteries, type
R20, UM1 or D-cells, (preferably alkaline) with the correct
polarity as indicated by the "+" and "-" symbols inside the
compartment.
Batteries
Whenever convenient, use the mains supply if you want to conserve battery life. The battery supply
will be switched off when the set is connected to the mains. Make sure you remove the plug from the
set and wall outlet before inserting batteries.
BATTERIES (NOT SUPPLIED)
The CD part of this system also serves as a Video CD player if you connect it to your TV
set.
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or
NTSC system of your TV set (exception Multi-system TV).
Battery type
Alkaline
Zinc Cartonate
For best CD/MP3-CD/VCD playback, please plug in your set to an AC power supply where
convenient.
If operated in DC mode, see below approximate playtime. (Playtime is also varied from
different brand batteries) :
IMPORTANT!
POWER SUPPLY
3-2
CONNECTIONS AND CONTROLS
1 Set the source selector to FM or MW.
2. Adjust the sound using the VOLUME, DYNAMIC BASS BOOST
and INCREDIBLE SURROUND control buttons.
3. Tune to a radio station using the TUNING knob.
– For FM, pull out the telescopic aerial. To improve FM-reception,
incline and turn the aerial. Reduce its length if the FM-signal is
too strong (very close to a transmitter).
– For MW, the set is provided with a built-in aerial, so the
telescopic aerial is not needed. Direct the aerial by turning
the whole set.
4. To switch off, set the source selector to the TAPE/OFF
position (with the cassette keys released).
RADIO RECEPTION
STOP
PLAY•PAUSE
VOLUME
STOP
PLAY•PAUSE
VOLUME
DYNAMIC
ULTRA BASS
BASS
BOOST
SE
DYNAMIC
PLAY•PAU
N
PAUSE
STOP-OPE
INCREDIBLE
SURROUND
PAUSE
STOP-OPE
N
CD MODE
SEARCH
CD MODE
SEARCH
SEARCH
PLAY
INCREDIB
SURRO
L
ULTRA B
BASS
ULTRA BASS
BASS
BOOST
INCREDIBLE
SURROUND
DYNAMIC
VOLU M
SEARCH
PLAY
RECORD
US
RECORD
PA
E
STO
P-O
PEN
SEAR
FM
MHz
CH
88
MW
MHz
92
FM
MHz
TUNING
100
92
630
MW
MHz
96
TUNING
88
530
530
800
104
8
100
800
104
10
1000
8
CH
1600
1300
630
1000
96
10
SEAR
PLAY
1600
1300
RECORD
ISO 9660 or ISO 9660 + Joliet format - Max. 30 characters
Max. Track number is 400
Max. nested directory is 8 levels
The max. album number is 99
The max. MP3 programme track number is 20
The max. length of each track is 99 minutes 59 seconds
The player can play mixed mode disc of CD / MP3-CD
Supported VBR bit-rate
Supported sampling frequencies for MP3 disc : 8 kHz to 48 kHz (44.1kHz preferably)
Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably)
For MP3-CD only
™The total track number "XXX" and album number “AXX" will
be displayed interchangeably.
1. Set the source selector to CD/VCD.
2. Lift to open the CD door.
™"OP" will be displayed
3. Insert a disc with the label side facing up.
4. Close the CD door.
™ The total number of tracks of the disc appear on the display.
™ "no" will be displayed if no disc is inserted or error in CD
operation
LOADING A DISC
• The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS, MP3 PRO
• The non-session closed discs
Following formats are not supported
•
•
•
•
•
•
•
•
•
•
Support following MP3-CD formats:
This set can play all digital audio CD, video CD, finalised digital audio CD-Recordable (CDR) discs
and finalised digital audio CD-Rewritable (CDRW) discs.
GENERAL OPERATION
1. To switch on the set, adjust the source selector.
2. Adjust the sound using the VOLUME, DYNAMIC BASS
BOOST and INCREDIBLE SURROUND control buttons.
3 To switch off the set, adjust the source selector to the
TAPE/OFF position, with the cassette keys released.
DISCS FOR PLAYBACK
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
All unnecessary packaging material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard, polystyrene and plastic.
Environmental information
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
CAUTION
CD/VCD/MP3-CD
The type plate is located on the bottom of the set.
1. Check if the mains voltage as shown on the type plate (on the
bottom of the set) corresponds to your local mains voltage.
Select 110 or 220V by the selector (for some version only).
2. If your set is equipped with a voltage selector, adjust the
selector so that it matches with the local mains.
3. Connect the mains lead to the AC MAINS ~ socket and the
wall socket.
™ The set is now ready for use.
4. To switch off the mains supply completely, pull the mains plug out of the wall socket.
™ Disconnect the mains lead when you change over to battery supply, or to protect the set
during heavy thunderstorms.
MAINS
GENERAL OPERATION
3-3
INSTRUCTIONS FOR USE
or
press & hold § or § on the set for 1 second and then release § or § to select fast search speed
(x1). Repeat this step to select other speed (x2, x3, x4).
For VCD only
• Either press 5 or 6 on the remote control repeatedly to select fast search speed (x1, x2, x3 or x4)
1. Press § or § repeatedly to select another track.
™ The new selected track will show on the display screen and TV screen and playback
continuously.
2. Press 2; to start playback the new selected track.
To select and playback another track during playback mode
• Press § or § on the set repeatedly (or on the remote control, press § or §) to select a desired
track from the current album.
™ "XXX" will be displayed.
™ On TV screen, the arrow will move forward/backward in the TRACK menu.
• Use the digital keys on the remote control to select the track under current album directly.
To select a desired track
• On the remote control, press ¡ or ™ until the desired album number appear on the display.
™ "AXX" will be displayed.
™ On TV screen, the arrow will move forward/backward in the ALBUM menu.
For MP3-CD only
To select a desired album
• Press and hold § or § on the set for 1 second (or on the remote
control,press5 or 6)
™ During searching, the volume will be muted.
To search for a particular passage during playback
• Press § or § on the set repeatedly (or use digits 0 - 9 buttons on the remote control) until the
desired track appears on the display.
• If playback is stopped, press 2; to start playback.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
1. Press 2; to start playback.
™ The track number of the current track and 2 appear on the
display.
• To interrupt playback, press 2;.
™ 2 will disappear and the current track number will start flashing.
• To resume playback, press 2; again.
2. To stop playback, press 9.
PLAYING A NORMAL DISC
™ On TV screen, the total ALBUM and TRACK number will display, also with the album list (max.
10 lines per page). The current selected music is highlighted.
Notes : - To ensure good system performance, wait until the disc completely reads before
proceeding.
- For MP3-CD, the disc reading time may exceed 1 minute due to the large number of
songs compiled into one disc.
CD/VCD/MP3-CD
For MP3-CD only
1. In stop mode, press PROG on the remote control to enter programme setting.
™ PROG will start flashing and " P01" will be displayed.
™ On TV screen, "PROG" program list (5 lines per page) will be displayed.
2. Press digits 0 - 9 on the remote control or ¡ / ™ to select the desired album.
3. Press PROG to store the select album. The number “AXX” represents the album no.
4. Press § / § repeatedly (or digits 0 - 9 on the remote control) to select the desired TRACK for
programming.
5. Press PROG to store the select track.
™ PROG will remain on the display.
• Repeat steps 1 to 5 to store other desired album and track.
6. Press 9 to end programme setting.
• Press PROG in stop mode can review the programme sequence.
7. Press 2 to start programme playback. You can press § / § to select the programmed track to
play.
8. Press 9 once stop programme playback or twice to clear the programme.
Notes : -The programming is automatically cleared as soon as the CD compartment is opened.
- The function of programme setting is disabled in PLAY/PAUSE mode.
- Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before
storing tracks from such a VCD.
1. In stop mode, press PROG on the remote control to enter programme setting.
™ PROG will flash on the display.
2. Press digits 0 - 9 on the remote control or § / § to select the desired track.
3. Press PROG to store the select track. The number “XXX” represents the track no.
• Repeat steps 1 to 3 to store other tracks.
4. Press 9 to end programme setting.
™ PROG will remain on the display.
• Press PROG (on remote control) in stop mode to review the programme sequence.
5. Press 2; to play the programmed tracks.
• If you press REPEAT during programme playback, the current track or all programmed tracks will
be played repeatedly.
™ REPEAT/REPEAT ALL icon and PROG will appear on the display.
6. Press 9 in stop mode to clear the programme.
™ PROG will disappear from the display.
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in
the memory in any order.
PROGRAMMING TRACKS
CD/VCD/MP3-CD
3-4
INSTRUCTIONS FOR USE
• Press OSD on the remote control to select viewing various information.
™ The current track and current /elapsed time in the track/disc appear on the display.
If you insert VCD/CD, your TV screen will serve as an additional display for messages (e.g. PLAY,
STOP), and information stored on the VCD/CD.
OSD - On Screen Display
1. On the remote control, press NTSC/PAL to switch between NTSC and PAL TV system.
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system
of your TV set (exception Multi - system TV).
Adjusting the TV System
VIDEO CD
Notes : - If the Repeat function is enable, and the Stop button is pressed, will disable all the
repeat play modes.
1. During CD/ MP3-CD playing or pause mode, press REPEAT on the remote control or CD MODE
on the set.
™ REPEAT icon
- to repeat the current track.
™ REPEAT ALL icon
all- to repeat the whole disc.
2. To exit the repeat mode, press REPEAT on the remote control or CD MODE on the set until the
REPEAT/REPEAT ALL icon disappears from the display.
You can play the current track or the whole disc repeatedly.
REPEAT
1. During playing, pause or stop mode, press SHUFFLE on the remote control or press CD MODE
on the set to enable SHUFFLE play mode.
™ SHUFFLE will appear on the display.
2. To exit shuffle mode, press SHUFFLE again or 9.
™ SHUFFLE will disappear from the display.
You can play all the tracks in random order.
SHUFFLE
CD/VCD/MP3-CD
This feature is also applicable to audio CD (except for MP3-CD). To Play a certain scene or passage
of the disc repeatedly.
A-B repeat
1. Press SLOW on the remote control to watch a VCD at a slower speed. There are 4 types of slow
modes to select.
™ The sound will be muted.
™ On TV screen, "SLOW 1/2", "SLOW 1/4", "SLOW 1/8" or "SLOW 1/16" will be displayed.
2. To resume playback at normal speed, press SLOW repeatedly until "PLAY" appears on the TV
screen or press 2;.
Slow
Note : - The disc time entered should not be greater than the total disc time.
- Goto mode is not available whenever PBC mode is switched on.
1. Press GOTO on the remote control.
™ On TV screen, "GOTO --:--" will be displayed.
2. Press digits 0 - 9 on the remote control to key in the disc time which you want the disc to begin
playback.
Goto
1. During playback, press 2; to have a still picture on the TV screen.
™ The sound will be muted.
™ On TV screen, "PAUSE" will be displayed.
2. Press 2; again to continue playback.
Pause
Notes : - Programme mode is not available whenever PBC mode is switched on.
- The menu structure depends on the programme stored on the VCD. Please refer to the
information supplied with the disc.
• In stop mode, press PBC.
™ On TV screen, "PBC OFF" will be displayed shortly.
Switching off PBC
1. Press digits 0 - 9 on the remote control to select your choice.
™ The VCD starts playing of the selected sequence automatically.
2. Press RETURN on the remote control to go back to the previous menu.
Note : - If a menu consists of more than one page, press § / § to go through the pages.
If the menu consists of a list of titles, you can select a sequence directly
VCD with PBC (Playback Control) will be indicated of the set and on your TV screen as soon as they
are inserted. PBC is a predefined play sequence stored on the VCD.
1. Switch on the TV, insert a VCD with PBC.
2. Menu appears on the TV screen.
Playing a Video CD with PBC
VIDEO CD
CD/VCD/MP3-CD
3-5
INSTRUCTIONS FOR USE
➔
➔
on the LCD represents channel left/channel right / dual channel on a bilingual
VCD or mono left / mono right / stereo on single language VCD.
• Press R/L/ST on the remote control repeatedly to select the following modes:
You can use it to select the different audio modes.
R/L/ST
• Press RETURN on the remote control to return to the previous VCD disc MENU level. It is
functional only for Video CD when PBC is switched on.
Return
Note : - If the disc is AVCD disc and there're no video tracks on the same viewed page, cannot use
the direct digital key to play the track.
2. In playback mode, press VIEW on the remote control to go to track view function.
™ press § or § to select the track.
™ On TV screen, up to 9 pictures within the track will be displayed.
™ The first several seconds of each picture will be played.
To exit review mode, press digits 0 - 9 to play the desired position within the track or 2; to
play the current selected position.
1. In stop mode, press VIEW on the remote control to go to disc view function.
™ On TV screen, up to 9 pictures will be displayed. If a menu consists of more than one page,
press § or § to view the previous/next page.
™ The first several seconds of each track will be played.
To exit review mode, press digits 0 - 9 to play the desired track or 2; to play the current
selected track.
This feature allows you to scan through a VCD for a quick review. PBC mode must be switched off.
View
Note : - Resume will not be available if you have changed the disc, opened the disc tray or
disconnected the system from the power supply.
• In stop mode, press RESUME on the remote control to start playback again from where you have
stopped.
Resume
Notes : - You can also cancel A-B repeat by pressing § or §.
- A-B repeat marking can cross from one track to another. But for VCD 2.0, you are only
able to set the A-B repeat marking within the same track.
1.Press A-B on the remote control during playback to mark the start point of the chosen scene or
passage.
™ "REPEAT A" will appear on the screen.
2. Press A-B again to mark the end of the chosen scene or passage.
™ "REPEAT AB" will appear on the screen.
™ The selected scene or passage will start playing repeatedly.
3. Press A-B once more to return to normal playback.
™ "REPEAT AB" will disappear from the display.
CD/VCD/MP3-CD
Notes : - For protected CDs, “MIX CD-DA” is displayed on your TV screen even if the disc does
not have other format. The MIX/SEL normal functions are not available for protected
CDs.
1. As default, audio CD tracks will be read first.
™
will be displayed.
™ TV screen, "MIX, CD-DA" will be displayed.
2. Press MIX/SEL (on the remote control) repeatedly to select other
disc modes.
• MP3-CD:
™ MP3 is displayed.
™ TV screen, MP3 menu is displayed.
This set can play a mixed mode disc.
– mixture of audio CD and MP3-CD
– mixture of other combination may not be operated normally.
PLAYING A MIXED MODE DISC
CD/VCD/MP3-CD
3-6
INSTRUCTIONS FOR USE
US
E
1
ST
OP
-OP
EN
SEA
RCH
SEARCH
PLAY
RECORD
• To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in
front of you and break out the left tab. Recording on this side is no longer possible.
Notes : -No recording will take place during the 7 seconds in the
beginning of the tape.
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II )
or METAL (IEC IV ) type cassettes. For recording you should
use NORMAL type cassettes (IEC I) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to
avoid jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME
and DYNAMIC BASS BOOST controls will not affect the
recording in progress.
• No recording will take place during the 3 seconds, when the
leader tape passes the recorder heads.
General information on cassette recording
CASSETTE RECORDING
PA
USE
UM
DYNAMI C
Y•PAUS
E
INCRED IBL
SURRO
D
INCRED IBL
SURRO
ND
ULTRA B
BASS
BOOST
ULTRA B
BASS
OST
DYNAMI C
VOL UME
PA
US
E
PA
E
ST
US
OP
-OP
EN
OP
-OP
ST
EN
RCH
RCH
SEARCH
SEA
SEA
SEARCH
PLAY
SEARCH
PLAY
RECORD
RECORD
Connect microphones (not supplied) to the system allowing you to sing along with the music source.
1. Connect microphones to the jacks .
• Before connecting the microphone, set the microphone level with KARAOKE 1/KARAOKE 2
volume knobs to the lower level to prevent howling sound.
2. Select VCD and press 2; to start playback.
3. Adjust the volume level of the source with VOLUME control.
4. Press ECHO +/– to adjust the ECHO level to the desired mixing level.
5. Start singing or talking through the microphone.
6. Press KEY +/– to select key tone if necessary.
Microphone mixing
KARAOKE
To select and record a particular passage within a track
1. Press and hold SEARCH § or § on the set to select a passage.
2. Put the CD player in PAUSE ; position at the selected passage.
™ Recording will start from this exact point when you press RECORD 0.
1. Set the source selector to CD•VCD.
2. Insert a CD and if desired, programme track numbers.
3. Press STOP•OPEN 9 / to open the cassette holder.
4. Insert a blank cassette.
5. Press RECORD 0 to start recording.
™ Playing of the CD programme starts automatically from the
beginning of the programme. It is not necessary to start the
CD player separately.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording press STOP•OPEN 9 /
SYNCHRO START CD RECORDING
1. Set the source selector to FM or MW.
2. Tune to the desired radio station using the TUNING knob.
3. Press STOP•OPEN 9 / to open the cassette holder.
4. Insert a blank tape.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9 /
E
INCRED IBL
SURRO
ND
1. Set the source selector to TAPE/OFF.
2. Press STOP•OPEN 9 / to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY 1 and playback will start.
5. Adjust the sound using the VOLUME and DYNAMIC BASS
BOOST controls.
6. For brief interruptions, press PAUSE ;. Press PAUSE ; again to
resume playback.
7. By pressing 5 or 6,fast winding of the tape is possible in both directions.
8. To stop playback, press STOP•OPEN 9 /
™ The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/OFF position (with the
cassette keys are released) to switch off the set.
ULTRA B
NAMIC BASS
BOOST
RECORDING FROM THE RADIO
CASSETTE RECORDER
CASSETTE PLAYBACK
CASSETTE RECORDER
3-7
INSTRUCTIONS FOR USE
X
INCREDIBLE
SURROUND
DYNAMIC BASS
ULTRA BASS
BOOST
VOLUME
PLAY•PAUSE
A
STOP
PAUSE
STOP-OPEN
Cleaning of the heads can also be done by playing a cleaning cassette through once.
To ensure a good recording and playback of the tape deck, clean
parts A,B and C show in the diagram below, after approx. 50 hours of
operation, or on average once a month. Use a cotton bud slightly
moistened with alcohol or a special head cleaning fluid to clean the deck.
• Open the cassette holder by pressing STOP•OPEN 9 /.
• Press PLAY 1 and clean the rubber pressure rollers C.
• Press PAUSE ; and clean the magnetic heads A and also the
capstans B.
• After cleaning, press STOP•OPEN 9 /.
TAPE DECK MAINTENANCE
• The lens of the CD player should never be touched.
• Sudden changes in the surrounding temperature can cause
condensation to form and the lens of your CD player to cloud over.
Playing a CD is then not possible. Do not attempt to clean the lens but
leave the set in a warm environment until the moisture evaporates.
• Use only Digital Audio CDs.
• To take a CD out of its box, press the centre spindle while lifting the
CD.
Always pick up the CD by the edge and replace the CD back in its box
after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the centre towards the
edge using a soft, lint-free cloth. Do not use cleaning agents as they
may damage the disc.
• Never write on a CD or attach stickers to it.
CD PLAYER AND CD HANDLING
• Place the set on a hard, flat surface so that the system does not tilt.
• Do not expose the set, CDs, batteries or cassettes to humidity, rain,
sand or excessive heat caused by heating equipment or direct sunlight.
• Always shut the CD door to keep the CD compartment dust-free. To
clean, dust the compartment with a soft dry cloth.
• Do not cover the set. Adequate ventilation with a minimum gap of 15
cms between the ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.
• The mechanical parts of the set contain self-lubricating bearings and
must not be oiled or lubricated.
• To clean the set, use a soft, slightly dampened chamois leather. Do not
use any cleaning agents containing alcohol, ammonia, benzene or
abrasives as these may harm the housing.
PRECAUTIONS & GENERAL MAINTENANCE
CD MODE
SEARCH
SEARCH
PLAY
RECORD
88
MW
M
Hz
TUNING
92
530
96
100
630
1000
108
104
800
160
0
1300
A B C
FM
M
Hz
MAINTENANCE
The remote control does not function
properly
GENERAL
The system does not react when buttons
pressed/set does not work/no display on
LCD.
Sound cannot be heard or is of poor
quality
TAPE OPERATION/RECORDING
Recording or playback cannot be made
RADIO RECEPTION
Radio reception is poor
No picture on TV screen
No colour on TV
CD/VCD OPERATION
"NO DISC" is displayed
Problem
– Slide the source sector to TAPE/OFF. Remove and
reconnect the AC power plug for 30 seconds and
switch on the system again.
– Adjust the volume.
– Make sure the MP3-CD was recorded within
32-320 kbps (128kbps preferably) with sampling
frequencies at 8 - 48 kHz (44.1kHz preferably).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities (+/- signs)
aligned as indicated.
– Replace the batteries.
– Point the remote control in the direction of the
system's IR sensor.
– Clean deck parts, see "Maintenance".
– Use only NORMAL (IEC I) tape.
– Apply a piece of adhesive tape over the missing
tab space.
– If the signal is too weak, adjust the antenna
for better reception.
– Increase the distance between the Receiver
and your TV or VCR.
– Insert a disc.
– Check if the disc is inserted upside down.
– Wait until the moisture condensation at the lens has
cleared.
– Replace or clean the disc, see "Maintenance"
– Use a readable disc or correct recorded format
MP3-CD.
– Connect the cable between the system and TV.
– Change the system to the respective PAL or
NTSC setting.
Solution
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
WARNING: Do not open the set as there is a risk of electric shock. Under no
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
TROUBLESHOOTING
3-8
INSTRUCTIONS FOR USE
4-1
4-1
DISASSEMBLY DIAGRAM
A.Remove Front Cabinet Assembly
B.Remove Top Cabinet
C.Remove AF Board
D.Remove Tape Deck
E.Remove Front Board
F. Remove LCD Panel
G.Remove Tuner Board
H.Remove Control Board
I. Remove Handle
A3 x2
A2 x2
I1
x2
A1 x9
B1 x4
H2 x5
H1 x4
C1 x2
G1 x4
E2 x2
D1 x4
E1 x3
F1 x4
F2
4-2
BLOCK DIAGRAM OF INTEGRATED CIRCUIT
SPCA711A
4-2
4-3
4-3
BLOCK DIAGRAM OF INTEGRATED CIRCUIT
MM1469AH
SPCA718A
5-1
BLOCK DIAGRAM
5-1
6-1
WIRING DIAGRAM
6-1
7-1
TUNER BOARD - CIRCUIT DIAGRAM
7-1
7-2
TUNER BOARD - LAYOUT DIAGRAM
7-2
8 -1
VCD BOARD/LCD BOARD/KARAOKE BOARD - CIRCUIR DIAGRAM
8-1
8-2
LCD BOARD - LAYOUT DIAGRAM
KARAOKE BOARD - LAYOUT DIAGRAM
8-2
8-3
VCD BOARD - LAYOUT DIAGRAM
8-3
8-4
VCD BOARD - LAYOUT DIAGRAM
8-4
9-1
AF BOARD AND CONTROL BOARD - CIRCUIT DIAGRAM
9-1
9-2
AF BOARD - LAYOUT DIAGAM
9-2
CONTROL BOARD - LAYOUT DIAGRAM
10 - 1
CASSETTE BOARD - CIRCUIT DIAGRAM
10 - 1
10 - 2
10 - 2
CASSETTE BOARD - LAYOUT DIAGRAM
RECORDER BOARD - LAYOUT DIAGRAM
37 1 3
3716
97 0 3
37 2 0
97 5 1 3 7 2 1
W
3735
R
2
3
13213 311 0413
37 2 8
1 7 21 17 2 2 1 7 0 2 1 7 0 1
17 2 5
3 73 4
HS
72
51 -21 -89
DS -FTM -OCE
1
1709
97 0 6
37 2 2
2 7 38
Y
4
B
C
3738
9759
97 5 7
A
37 3 7
2 7 40
3 7 50
97 0 2
1707
2 7 27
3 7 23
37 4 8
P
27 2 9
37 4 9
2721
9756
3711
2728
97 5 8
27 2 0
9705
C
3 7 36
27 0 1
9761
9752
7172
3 7 12
2 7 12
2 7 09
3719
27 0 0
2714
3761
2 7 26
R
HS MTR F - SD
ECO-
3 7 39
3 7 14 3 7 04
3740
2722
27 5 1
27 1 1
3707
7705
77 0 1
3703
2715
2708
2750
27 0 7
97 5 5
2730
37 0 1
37 0 6
9701
97 5 4
D
6715
2719
37 4 4
5701
2703
9707
9 7 62
37 1 0
2713
6704
73
7704
2 7 06
3730
2 7 3 1 2 7 1 0 37 3 1
3747
2 7 32
37 3 2
2733
C
77 0 3
8172
7702 3742
B
3733
2735
27 3 4
98- 12- 15
3140 113 31231
3726
3 7 27
27 1 6
37 4 3
M+ M 74
2723
A
9 7 60
A
51 -21 -89
2704
5
2739
1 -R 2 7 6 0
71
4
9 7 53
3
3724
2
3762
1
D
71
72
73
74
1701
1702
1707
1709
1721
1722
1725
2700
2701
2703
2704
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2726
2727
2728
A
D
A
A
A
B
D
C
B
B
C
B
B
C
A
A
B
B
C
B
B
D
B
B
B
B
C
B
A
C
C
C
C
C
D
C
1
5
5
1
5
5
3
5
5
5
5
4
5
2
3
3
2
4
3
1
2
1
3
4
3
3
3
3
3
3
4
2
2
2
2
5
5
CASSETTE ADJUSTMENT
Adjustment
Cassette
SK ....
Deck 1
Measure
on
Read
on
Adjust
with
Adjust
to
Azimuth
10 kHz
SBC420*
Tape
Play
H/P Jack
mV meter
Left hand
Screw
R/P head
max.
Motor
Speed
3150 kHz
SBC420*
Tape
Play
H/P Jack
Wow and
flutter
meter
Preset
in motor
**a
* SBC420 : 4822 397 30071
**a The maximum permissible speed deviation is ± 3%.
Morever, the wow and flutter value can be read.
2729
2730
2731
2732
2733
2734
2735
2738
2739
2740
2750
2751
2760
3701
3703
3704
3706
3707
3710
3711
3712
3713
3714
3716
3719
3720
3721
3722
3723
3724
3726
3727
3728
3730
3731
3732
C
D
C
B
C
A
A
D
C
C
B
C
A
A
B
B
B
B
A
C
D
C
C
C
C
D
D
D
C
A
A
A
A
B
B
B
5
1
1
1
1
1
1
4
4
4
3
2
2
2
4
4
3
2
3
3
1
3
4
3
2
2
3
5
5
5
3
3
4
1
1
1
3733
3734
3735
3736
3737
3738
3739
3740
3742
3743
3744
3747
3748
3749
3750
3761
3762
5701
6704
6715
7701
7702
7703
7704
7705
9701
9702
9703
9705
9706
9707
9751
9752
9753
9754
9755
B
D
D
B
C
C
A
B
B
A
B
B
D
C
D
C
B
C
B
A
B
B
A
A
B
D
D
D
C
D
C
D
D
D
C
D
2
5
3
5
5
5
5
4
1
2
2
1
4
5
4
2
3
1
2
2
4
1
4
4
3
2
3
3
4
5
2
3
5
5
1
1
9756
9757
9759
9760
9761
9762
T701
T702
T705
T706
T709
T710
T711
T712
T713
T714
T715
T716
T719
T720
T721
T722
T725
T7707
T7708
C
D
D
A
B
D
C
C
B
B
A
C
B
C
A
D
D
D
B
A
C
C
D
A
A
3
3
4
2
5
1
5
5
5
5
5
1
5
2
5
5
5
1
1
5
5
2
2
4
4
11 - 1
11 - 1
EXPLODED VIEW DIAGRAM - CABINET
4 (2x)
SCREW LIST :
1
2
3
4
5
6
7
8
9
0
!
C M 2.5 x 6
C P/W 2.5 x 10
T2 x 10
411
T3 x 8
9 (2x)
6 (2x)
T3 x 10
T3 x 12
T3 x 16
T3 x 20
409
10 (4x)
T3 x 25
T P/W 3 x 12
6 (2x)
5 (2x)
433
T P/W 3 x 16
6 (2x)
408
419
6 (3x)
429
2
453
430
428
418
6 (4x)
431
420
452
4 (2x)
7 (4x)
10 (4x)
449
417
6 (2x)
416
1 (2x)
414
6
427
422
402
6 (5x)
6 (4x)
426
10
421
1
401
6 (4x)
10 (4x)
434
6 (4x)
5 (4x)
4 (4x)
443
11- 2
11 - 2
EXPLODED VIEW DAIGARM - CABINET
MECHANICAL PARTSLIST - CABINET
456
451
8 (9x)
6
454
6 (2x)
461
462
10
459
11
3 (2x)
502
457
6 (2x)
458
401
402
408
409
411
9965 000 20742
9965 000 20741
9965 000 20738
9965 000 14240
9965 000 20737
CASS LENS
DOOR CASS
BUTTON SET-PLAY
TAPE DECK TK20FX-V682-001
CASS KNOB SET
414
417
418
419
420
9965 000 20731
9965 000 20739
9965 000 20740
9965 000 08506
3140 114 20430
SPRING-CASS DOOR
BUTTON SET-MODE
LCD BKT
REC SPRING
BRACKET ECO-MTF-SD
421
422
426
427
428
9965 000 20540
9965 000 20735
9965 000 20744
9965 000 20746
9965 000 20747
DAMPER RUBBER 30JIS BLK
TCP11TK2-P CD MECH.(THOMSON)
FUNCTION KNOB
IS KNOB
DBB KNOB
429
430
431
433
434
9965 000 20745
9965 000 20750
9965 000 20748
9965 000 20736
9965 000 20541
VOL KNOB
KARAOKAE VOL KNOB
TUN.KNOB
CD DOOR
DAMPER RUBBER 40JIS GREY
443
449
452
453
454
4822 529 10322
9965 000 20730
9965 000 20729
9965 000 20749
9965 000 20733
DAMPER ASSY
SPRING-CD
HANDLE BKT
HANDLE
BATTERY SPRING(+)
456
459
461
462
9965 000 20732
9965 000 20734
9965 000 08510
9965 000 20743
9965 000 14258
SWIVEL ANTENNA
BATTERY SPRING(+-)
COMP.SPRING (-)
DOOR BATT.
REMOTE BATT. DOOR
Note: Only these parts mentioned in the list are
normal service parts.
11 - 3
11 - 3
EXPLODED VIEW DIAGRAM - TAPE DECK
MECHANICAL PARTSLIST - TAPE DECK
32
41
55
58
62
4822 403 20244
4822 358 31323
4822 358 31322
4822 403 71219
4822 249 10475
Roller Arm Assy
F. Belt
Main Belt
Eject Belt
R/P Head
63
64
4822 249 10531
4822 361 21599
E. Head
Motor EG-530AD-2B
Note : Only those parts mentioned in the list are
normal service parts.
12 - 1
ELECTRICAL PARTSLIST
- MISCELLANEOUS 1256
1302
1503
1504
1707
9965 000 20763
! 9965 000 20760
9965 000 20761
9965 000 20762
4822 277 11504
- COILS & FILTERS SLIDE SWITCH
FUSE 3,15A 250V
SLIDE SWITCH
SLIDE SWITCH
PUSH-SWITCH
L20
L3
L301
L302
L303
9965 000 20549
9965 000 20549
9965 000 20756
4822 157 71567
9965 000 11817
10µH CHIP INDUCTOR
10µH CHIP INDUCTOR
10µH INDUCTOR
COIL 2,5T
FM COIL 3-1/2T
9556
CD SW
IR901
J501
J502
9965 000 20764
9965 000 20752
9965 000 20561
9965 000 20544
9965 000 20543
ROTARY SWITCH
DOOR LATCH SWITCH
TSOP1838 IR RECEIVER
EARPHONE JACK
STEREO EARPHONE JACK
L306
L4
L5
L6
L8
9965 000 20756
9965 000 20549
9965 000 20549
9965 000 20549
9965 000 20550
10µH INDUCTOR
10µH CHIP INDUCTOR
10µH CHIP INDUCTOR
10µH CHIP INDUCTOR
2,7µH SMD COIL
MIC501
MIC502
SW901
SW902
SW903
9965 000 20765
9965 000 20765
9965 000 20557
9965 000 20557
9965 000 20557
3,5MM PHONE JACK
3,5MM PHONE JACK
TACT SWITCH
TACT SWITCH
TACT SWITCH
L9
T301
T302
T303
T304
9965 000 20549
9965 000 16786
9965 000 16787
4822 157 10689
9965 000 16790
10µH CHIP INDUCTOR
MW OSC,COIL 843744
IFT MW 843745
FM DET COIL
BAND PASS FILTER
SW904
SW906
9965 000 20557
9965 000 20557
! 2422 070 98151
4822 277 30971
! 9965 000 08577
TACT SWITCH
TACT SWITCH
MAINSCORD EUR 1M5 BK B
SWITCH
AC SOCKET
X1
X2
9965 000 20552
9965 000 14271
9965 000 14465
8,4672 MHZ CRYSTAL
CRYSTAL 27MHZ
AM COIL 100T
9965 000 10684
9965 000 20751
9965 000 20755
9965 000 20768
! 9965 000 20769
FERRITE BAR
FLAT CABLE (FCC) 16P
LCD DISPLAY
MINIATURE PHONE JACK
AC TRANSFORMER
6300
6301
6302
6303
6304
5322 130 34574
5322 130 34574
5322 130 34574
5322 130 34574
9965 000 20759
1N4004G
1N4004G
1N4004G
1N4004G
6,8V 1/2W ZENER DIODE
4" SPK,6 OHM 5-8W
- CAPACITORS & RESISTORS -
6305
6309
6313
6314
6316
4822 130 30621
4822 130 30621
4822 130 30621
4822 130 30621
4822 130 30621
1N4148
1N4148
1N4148
1N4148
1N4148
PVC301
RB1
RB2
RB6
VR501
9965 000 20563
9965 000 20553
9965 000 20553
9965 000 20554
9965 000 20766
PVC 20P-160P/20X2
100OHM X4 RESISTOR ARRAY
100OHM X4 RESISTOR ARRAY
10 KOHM X4 RESISTOR ARRAY
VR 100KB
6704
D1
D10
D2
D301
4822 130 30621
4822 130 30621
4822 130 30621
4822 130 30621
4822 130 30621
1N4148
1N4148
1N4148
1N4148
1N4148
VR502
9965 000 20766
VR 100KB
D302
D303
D4
D5
D601
4822 130 30621
4822 130 30621
4822 130 30621
4822 130 30621
4822 130 30621
1N4148
1N4148
1N4148
1N4148
1N4148
9965 000 20770
- COILS & FILTERS -
- DIODES -
5701
CF301
CF302
L1
L10
4822 157 10371
9965 000 16797
9965 000 16789
9965 000 20549
9965 000 20753
COIL
CERAMIC FILTER SFU465B
LT10,7MS CER,FILTER
10µH CHIP INDUCTOR
100µH 0,3A INDUCTOR
D602
D603
D605
D606
D607
4822 130 30621
4822 130 30621
4822 130 30621
5322 130 34574
4822 130 30621
1N4148
1N4148
1N4148
1N4004G
1N4148
L11
L12
L14
L17
L19
9965 000 20550
9965 000 20754
9965 000 20549
9965 000 20549
9965 000 20549
2,7µH SMD COIL
33µH CHOKE COIL
10µH CHIP INDUCTOR
10µH CHIP INDUCTOR
10µH CHIP INDUCTOR
D608
D701
ZD1
ZD301
ZD501
4822 130 30621
4822 130 30621
5322 130 31504
9965 000 16799
4822 130 34233
1N4148
1N4148
BZX79-B3V3
ZENER DIODE 2,4V 1/2W
BZX79-B5V1
12 - 2
ELECTRICAL PARTSLIST
- IC & TRANSISTORS 1252
1258
1259
7250
7251
5322 209 61473
5322 209 61473
5322 209 61473
4822 130 41319
4822 130 41319
LM324M
LM324M
LM324M
2SC1815BL
2SC1815BL
7252
7258
7263
7513
7514
4822 130 62718
4822 130 62718
4822 130 41319
4822 130 62718
4822 130 62718
JE8050C
JE8050C
2SC1815BL
JE8050C
JE8050C
7702
7705
D3
IC301
IC501
4822 130 40981
4822 209 17498
9965 000 20551
9965 000 16785
9965 000 20767
BC337-25
AN7323
SM5817
KA22902
KIA4558P
IC601
IC602
IC603
IC901
Q1
4822 209 61395
4822 209 61395
9965 000 20758
9965 000 10667
9965 000 16236
TEA2025B
TEA2025B
NJM4580
HT1621
PBSS4140T
Q11
Q12
Q13
Q14
Q15
9965 000 16236
9965 000 16236
9965 000 14276
9965 000 16236
9965 000 16236
PBSS4140T
PBSS4140T
HMBT8550
PBSS4140T
PBSS4140T
Q2
Q301
Q5
Q601
Q602
9965 000 16235
4822 130 41319
9965 000 16236
4822 130 62718
4822 130 41945
PBSS5140T
2SC1815BL
PBSS4140T
JE8050C
2SB562(C)
Q603
Q605
Q8
Q9
Q901
4822 130 41945
9965 000 20757
9965 000 16236
9965 000 16236
9965 000 20559
2SB562(C)
2SB1342
PBSS4140T
PBSS4140T
SS9014C
U1
U10
U11
U13
U3
9965 000 13432
9965 000 16922
9965 000 14730
9965 000 20547
9965 000 20546
WM8725
SAA7824HL
SPCA711A
SA57004-50GW
AT27C040-70PC
U4
U5
U7
U9
9965 000 10689
9965 000 20545
9965 000 20548
9965 000 16777
KAS161622D
SPCA718A
SA57255-33GW
MM1469A
Note: Only these parts mentioned in the list are
normal service parts.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising