Document
_............
_Owner's
Instructions
l Warninq
Safety
! Important
Instructions
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
dangerous
to make any kind of contact with any inside part of
This symbol indicates high voltage is present inside, It is
this product.
This symbol alerts you that
operation and maintenance
important literature
concerning
has been included with this producL
Note to CATV system installer: This reminder
is provided to call CATV system
installer's attention
to Article 820 40 of the National Electrical Code (Section 54 of
Canadian Electrical Code, Part I), that provides guidelines
for proper grounding
and, in particular,
specifies that the cable ground shall be connected
to the
grounding
system of the building as close to the point of cable entry as practical.
Caution: FCC/CSA regulations state that any unauthorized
ehanges
tlons to this equipment may void the user's authority to operate it.
Caution: To prevent etectric
and fully insert the plug.
shoek, match
or modillca
the wide Made of plug to the wide slot,
Attention: pour eviter les chocs electriques, introduire la lame le ptus large de la
fiche dans la borne correspondante
de la prise et pousserjusqu'au
fond.
Important:
copyrighted
One Federal Court has held that unauthorized
recording of
TV programs is an infringement
of U.S. copyright laws.
Certain Canadian programs may also be copyrighted
and any unauthorized
recording
in whole or in part may be in violation of these rights.
To prevent
hazard,
damage
do not
which
expose
this
may
result
appliance
in fire or electric
to rain
or moisture.
shock
Thank
You
for
Choosing
Samsung
Thank you for choosing Samsung! Your new Samsung Projection TV represents the latest hi
television technolog]t We designed it with easy to use on screen menus and dosed captioning
capabilities, making it one of the best products in its class. We are proud to offer you a product
that will provide convenient, dependable
service and enjoyment for years to come.
Important
Safety
Information
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,
and other injuries, keep these safety precautions
in mind when installing, using, and
maintaining your machine.
• Read all safety and operating
• Keep the
safety
and operating
• Heed all warnings
• Follow all operating
instructions
instructions
before operating
your T_
for future re%fence.
on the TV receiver and in the operating
instructions.
and use instructions.
• Unplug the TV receiver from the wall outlet befure cleaning.
liquid or aerosol cleaners.
Use a damp cloth; do not use
• Never add any attachments and/or equipment
without approval of the manufacturer.
additions can inci-ease the risk of fire, electric shock, or other personal injury.
Such
• Do not use the TV receiver where contact with or immersion in water is a possibility,
near bath tubs, sinks, washing machines, swimming pools, etc.
such as
• Do not place the TV on an unstable cart, stand, tripod, bracket, or
table where it can fail. A falling TV can cause serious injury to a
child or adult, and serious damage to the appliance. Use only with
a cart, stand, tripod, bracket, or table recommended
by the manu
facturer or sold with the TV[ Pollow the manufacturer_
instruc
tions when mounting the unit, and use a mounting accessory rec
ommended
by the manufacturer.
Move the TV and cart with care.
Quick stops, excessive force, and uneven surfaces can make the
unit and cart unsteady and likely to overturn.
• Provide ventilation fur the TV receiver. The unit is designed with slots in the cabinet for
ventilation to protect it from overheating.
Do not block these openings with any object, and
do not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near
a radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that
there is adequate ventilation and that you've followed the manufacturer_
instructions
for
mounting.
• Operate your TV receiver only from the type of power source indicated on the marking
If you are not sure of the type of power supplied to your home, consult your appliance
or local power compan]t
label.
dealer
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the
power outlet only one walt If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.
SAFELY
• Protect the power cord. Power supply cords should be routed so that they won't be walked on
or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con
venience receptacles, and the point where they exit from the unit.
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a light
ning storm or when left unattended
and unused for long periods of time. This will prevent dam
age to the unit due to lightning and power line surges.
• Avoid overhead power lines. An outside antenna system should not be
overhead power lines or other electric light or power circuits or where
power lines or circuits. When installing an outside antenna system, be
from touching the power lines or circuits. Contact with such lines can
• Do not overload
shock.
the wall outlet or extension
cords. Overloading
placed in the vich]ity of
it can fail into such
extremely careful to keep
be fatal.
can result in fire or electric
• Do not insert anything through the openings in the unit, where they can touch
age points or damage parts. Never spill liquid of any kind on the TV
• Ground outdoor antennas. If an outside antenna or cable
system is connected to the TV_ be sure the antenna or
cable system is grounded so as to provide some
protection against voltage surges and built up static
charges. Section 810 of the National Electrical Code,
ANSI/NFPA No.70 1984, provides infurmation
about
proper grounding
of the mast and supporting
structure,
grounding of the lead in wire to an antenna discharge
unit, size of grounding conductors,
location of antenna
discharge unit, connection to grounding electrodes, and
requirements
for the grounding electrode.
dangerous
volt
EXAMPLEQF
ANTENNAGROUNDING
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnei.
Unplug the unit from the wall outIet and refer servicing to qualified service personnel under the
fullowing conditions:
when the power supply cord or plug is damaged
if liquid has been spilIed on the unit or if objects have fallen into the unit
if the TV has been exposed to rain or water
if the TV does not operate normally by following the operating instructions
if the TV has been dropped or the cabinet has been damaged
when the TV exhibits a distinct change in performance
• If you make adjustments
yourself, adjust only those controls that are covered by the operating
instructions.
Adjusting other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV to normal.
• When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer
or those that have the same characteristics
as the original part.
Unauthorized
substitutions
may result in additional damage to the unit.
• Upon completion
of any service or repairs to this TV] ask the service technician
perform safety checks to determine that the TV is in a safe operating condition.
to
This device complies with part 15 of the FCC Rules. Operation
is subject to the following
two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
that may cause undesired
operation.
2 s_._
This television
receiver provides
15.119 of the FCC rules.
display
of television
closed
captioning
in accordance
with
Important
Regarding
Viewing
Warranty
Television
Information
Format
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format l'ull motion video. The images displayed on
them should pi-imari[y be in the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen, such as the dark top and bottom
letterbox bars (wide screen pictures), should be limited to no more than 1 5% of the total
television viewing per week.
Wide screen format televisions (l 6:9, the aspect i-atio of the screen width to height) are
primarily designed to view wide screen format fuli motion video. The images displayed
on them should primarily be in the wide screen 1 6:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side bars on non expanded standard
format television video and programming,
should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports,
video game displays, station logos, web sites or computer graphics and patterns, should
be limited as described abo\ e for all televisions. Displaying ar_y stationarly images that
exceed tile above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned in ghost inlages in the television picture. To avoid this, vary the programruing and images, and prinla_41y display full screen moving inlages, not stationaly patterns or
da_k bars. On television models that offer picture sizing features, use these controls to
view the different ft_rmats as a full screen picture.
Be careful in the selection and duration of television formats used for vie_ving.
Uneven
CRT aging as a result of' format selection and use, as well as other burned in images, is
not covered by your Samsung limited warranty.
CONTENTS
Chapter
]
1: Your
New
TV
...............
1.1
List of Features ..........................................
Familiarizing Ycourself with YcourNew TV ......................
Front Panel Buttons ...............................
Front/Side Panel lacks .............................
Using the Component Shelf .........................
Rear Panel lacks ..................................
Remote Control ..................................
Chapter
2: Installation
................
2.1
Connecting VHF and UHF Antermas .........................
Antennas with 300 ohm Flat _bvin Leads ...............
Antennas with 75 ohm Round Leads ..................
Separate VHF and UHF Antennas ....................
Connecting Cable TV .....................................
Cable without a Cable Box ..........................
Connecting to a CabJe Box that Descrambles
All Channels ....................................
Connecting to a Cable Box that Descrambles
some Channels ..................................
Connecting a VCR .......................................
Connecting a Second VCR to Record from the TV ........
Connecting a Camcorder ..................................
Connecting a DVD Player, DTV Set Top Box (480i, 480p, 1080i)
Connecting a DTV Set Top Box (480p, 1080i) ..................
Installing Batteries in the Remote Corltrol .....................
Chapter
3: Operation
..................
Your Favorite
Your Favorite
Channels:
ChanneJs:
....................
....................
Addirlg and Erasing Channels (Manual Method) ...............
Labeling the Channels
...................................
Picture Control ........................................
Customizing the Picture ...........................
Using Automatic Picture Settings ....................
Selecting the Color Tcone ..........................
Chapter
(_ON/EN/S
3: Operation
(Cont.)
2.1
2.1
2.2
2.2
2.2
2.2
2.3
2.{'_
2.5
2.(5
2.6
. 2.7
2.8
2.g
3.1
_lhrning the TV Or_ and Off ................................
Phtg & Play Featnre ......................................
Using the Perfect Focus Feature .............................
Ac]justing Manual convergerlce .............................
Adjust Red Convergence ...........................
Viewing the Menus and On Screen Displays ...................
Viewing the Menus ...............................
Viewing the Display ...............................
Selecting a Menn Langnage ................................
Selecting the Antenna Input ................................
Memorizing the Channels
.................................
Selecting the Video SignaJ source .....................
Storing Channels it1Memory (Antomatic Method) ........
Adding and Erasing Charlnels (Manual Method) .........
Changing Channels
.....................................
Using the Channel Buttons
........................
Using the Number Buttons ........................
Using the Previons Channel ........................
Selecting Your Favorite Channels
...........................
_I_ Store
_I_ View
1.1
1.2
1.2
1.3
1.t'_
1.4
1.5
..........
3.1
3.1
3.3
3.4
3.5
3.6
3.6
3.6
3.7
3.7
3.8
3.8
3.9
3.9
3 10
3 10
3 10
3 10
3 11
3 11
3 11
3 12
3 13
3
3
3
3
3.16
14
14
15
16
CONTENTS
Sound Control
.........................................
3.16
Adjusting the Volulne
............................
Using Mute ....................................
Customizing the Sound ...........................
Using Automatk Sound Settings ....................
Setting the Clock .......................................
Option 1: Setting the Clock Manually ................
Option 2: Using the Local PBS Channel to Automatically
Set the TV Clock ................................
Chapter
4: Special
Features
............
3.16
3.16
3.17
3.18
3.10
3.19
.'3.20
4.1
Fine 1lining Channels ....................................
Digital Noise Reduction ...................................
Changing the Screen Size ..................................
Using the R.surf Feature ...................................
Setting the On/Off Timer ..................................
Setting the Sleep Timer ...................................
4 1
42
48
44
45
46
Extra sound settings
......................................
47
Choosing a Multi Channel Sound (MTS) track .................
48
Viewing Closed Captions ..................................
49
Viewing Picture in Picture ................................
4. l0
Activating Pkture-in Picture .......................
4. l0
Selecting a Signal Source (Antenna or Cable) for PIP ..... 4.11
Selecting a Signal Source (External A/V) for PIP .........
4.1 i
Swapping the Contents of the PIP image and Main image 4.12
Changing the Size of the PIP Window ................
4.12
Changing the PIP Channel .........................
4.13
Changing the Location (Rotating) the PiP mode ........
4.13
Scanning the Available Channels ....................
4.13
Using the VChip .......................................
4.14
Setting Up Your Personal ID Number (PIN) ............
4.14
How to Enable/Disable the _Chip ...................
4.15
How to Set up Restrictions Using the "TV guidelines" . . 4.15
How to Set up Restrictions using the MPAA Ratings:
G. PC, PC i3, R, NC 17, X ........................
4.17
How to Reset the TV after the VChip Blocks
a Channel ("Emergency Escape") ....................
4.18
Viewing the Demonstration ........................
4.19
Customizing Your Remote Control ..........................
4.20
Setting Up Your Remote Control to Operate Your
VCR or DVD ...................................
4.20
Setting Up Your Remote Control to Operate Your
Cable Box .....................................
4.21
Chapter
5: Troubleshooting
Icientifying Problems
Appendix
............
.....................................
...........................
Cleaning and Maintaining Your TV ..........................
Using Your TV in Another Country ..........................
Specifications ...........................................
5.1
5 1
A.1
Ai
A1
A1
( _H_H_s 2
Your
NEW TV
List
of
Features
Your Samsung TV vvas designed with the latest tecbnolog_v This TV is a high perfurmance
unit that includes the following special features:
Easy to use remote control
Easy to use on screen menu system
Automatic
timer to turn the TV on and off
Adjustable
picture
and sound
Automatic
channel
tuning
A special filter to reduce
Fine tuning
control
settings
Built in, dual channel
in the TV_ memory
fur up to 181 channels
or eliminate
for the sharpest
A built in multi channel
that can be stored
sound
reception
picture
decoder
problems
possible
for stereo and bilingual
listening
speakers
A special sleep timer
Picture
in Picture
Component
Peribct Focus
_._
(2}lAP
I
ON}
Y(
t}l
N]\%
V
Video Input jacks to obtain
a sharper
image from external
sources
I
Your
NEw TV
Familiarizing
Front
The
Panel
buttons
menu.
Yourself
with
The
TV
Buttons
on the front
Tu use the more
panel
control
advanced
your
features,
TV_ basic
you
must
features,
use the
including
remote
the on
screen
control.
HCM4215W / HCM4216W / HCM422W
000
•
•
000
HCM5525WB / HCM653WB / HCM553WB / HCM474W
000
@ •
•
OO
PCM541551
OO
0000
•
0
HCM4715W
00000
O
O
HCM556W
O0
•
TV/VIDEO
All the inputs connected to the external
component jacks will be shown in regular
sequence.
Remote
Control
Sensor
Aim the remote control towards this spot on the TV.
Timer
indicator
When the TVis turned on,the limer indicatorblinks
abouttentimes,This indicatorilluminateswhenthe
MUTE
Press to temporarily cut off the sound.
O
1]mermodeis setto the" On"position after settingthe
clock and eitherthe Ontimer or Offtimer,with the
MENU
remotecontrol. Evenifthe power is turnedof[, this
indicatorstayslit. (Clockmust be setbefore usingthis
function,),
Pressto see an on screen menuofyour TV'sfeatures,
O
VOL-,
+
Press to increase or decrease the volume, Also
used to select items on the on screen menu.
CH_"
and
OH&
Press to change channels, Also press to highlight
various items on the on screen menu.
O
POWER
Press to turn the TV on and off,
Your
NEw TV
Front
or Side
]
Panel
Jacks
You can use the front or side pane[jacks to connect an A/V component
that is used only
occasionally, such as a camcorder or video game. (For infurmation
ollconnecting
equipment,
see pages 2.1
2.8.)
O
PERFECT
FOCUS
Pressto adjustfor the optimumpicture setin the Factory,
O
VIDEO
INPUT
jack
Use to connect a video signal from a camcorder or a video
game,
O
AUDIO
INPUTjacks
Use to connect the audio signals from a camcorder or video
game.
O
S-VIDEO
INPUTjack
Use to connect an S Video signal from a camcorder or a
video game,
0
O
O
O
Using
the
Component
Shelf
(HCM5525WB/HCM653WB/HCM553WB/HCM474W/HCM556W)
Yuu can place a VCR, a DVD player, etc. ollthe Component
Shelf.
HCM5525WB/HCM653WB/HCM553WB/HCM474W
1
2
3
4
Press the symbol" ,:&"
in the center of the
As shown in figure
below, hold the center
Component Shelf dooc
of door and lift it up,
After placing a cornponent on the shelf,
hold the center of door
and pull it down as
shown in figure below.
Shut the door by
pressing the* _&"
symbol.
"_
ttIi_s h5
elnf,c
hme_ktea
i_t-ar
e_tlieSa_
_ omn
_r iech
Note: When placinga component on
of space from the front and sides for
Lvenfilation.
HCM556W
1
Hold the center of the door and lift it up in the direction arrow
as shown in figure,
2
After placing a TV (or VCR,DVD,etc,) on the shelf, hold
the center of the door and pull it down as shown in figure.
1.3
( HAPI}}_O
: Y)tl/
Nv_
rv
Your
Rear
NEw TV
Panel
]
Jacks
Use the zear parle] jacks to connect an A/V component
ously, such as a VCR or a DVD player.
Because theze are two sets of inputjacks,
(i.e., a VCR and a DVD, 2 VCRs, etc.)
For more inf_rmation
oil connecting
0
0
ANTENNA
@0
you can connect
equipment,
•
•
terminals
ANTB terminals to receive a signal from
VHHUHF antennas or your cable system. Use
the ANTA OUTterminal to send the signal being
received by the ANnA terminal out to another
component (such as a Cable Set Top Box), The
PiP channel can be received only when a signal
source is connected to ANT A.
AUDIO-VIDEO
•
0
O
VIDEO
INPUT
jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices (Two sets are avail
abie: Video1 and Video2),
conthlu
A/V components
2.8.
0
AUDIO
INPUT
jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
O S-VIDEO
INPUT
jack
Connectto anS VHSVCRor DVDplayer.
0
COMPONENT
1(480i,
480p,
1080i)
AUDIO/VIDEO
INPUT
jacks
Connecta sourcethatoutputs480i/480p/1080i
Y,PL_
andP,signals,such asa DVD(or DTVSetTopBox.
0
COMPONENT
2,
1080i)
AUDIO/VIDEO
MONITOR
OUTPUT
jacks
Connect to the audio/video inputjacks of a
recording VCR,
Note: The monitor out does not operate in DVD
or DTV mode.
two different
see pages 2.1
Two independent cables or antennas can be
connected to these terminals, Use ANT-A and
O
that will be connected
3(480p,
INPUT
jacks
Connect a source that outputs 480p/1080iY,P,_
and P,_signals, such as a DTV Set-Top Box,
(The Component3 jack is available on PCM545PJ
HCM422W / HCM474W / HCM553WB /
HCM653WB)
Your
NEw TV
Remote
]
Control
You can use the remote control up to about
always point it directly at the TV
You can also use your remote control
for details.
23 fi_et from the ']'V_When ush]g the remote,
to operate
your VCR and cable box. See page 4.20
@ Mute
10t Power
Turns the TVon and off,
O
+100
Press to select channels over 100.
For example, to select channel
121,press" +100," then press" 2"
and" 12
O
Press to temporarily cut off
the sound.
Pre-CH
Tunesto the previous channel.
iiiiiiiiiiii!!i
_)
All the inputs connected to the
external component jacks will be
shown in regular sequence.
Still(Main)
Press to stop the action during a
particular scene, Press again to
resume normal video.
@
CHv
and
(Channel
Press CHv
channels.
CHA
menu,
Caption
Controls the caption decoder.
PIP
Activates picture in picture,
volume.
0
Sleep
Press to select a preset time inter
val for automatic shutoff.
Display
Press to display the current chan
nel and the audio video
settings,
O Aspect
Pressto changethe screensize.
O BBE
13BEis a built-in effect that adds
clarity, punch and dynamics to the
sound,
0
MTS
(Multichannel
Television
Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
1.5 (;.,,,p. _o
Menu
Displays the main on screen
Up/Down)
or CHA to change
VOL
-, VOL
+
Press increase or decrease the
0
IV/Video
: Y)tl/
N_
rv
_)
Perfect
Focus
Press to adjust for tile optimum
picture set in the Factory.
Fav. CH (Favorite
Channel)
Pressto switchbetweenyour
favoritechannels.
I
Your
NEw TV
Remote
Control
(continued)
ANT
A/B
Press to select the ANT A or ANT
Mode
Selects a target device to be
controlled by the Samsung
remote controi(Le,, TV,VCR,
Cable box or DVD),
B.
R.surf
Press to automatically return to a
preferred charnel after a user
preset time delay.
@
Used during set up of this
Samsung remote control, so that
it wifl work compatibly with
other devices (VCR,cable box,
DVD.)
S.Mode
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, cus
tomized sound settings),
P.Mode
Adjust the TV picture by select
ing one of the preset factory set
tings (or select your personal,
customized picture settings),
VCR
Set
@
V.Chip
Press to set up and activate the
parental locks.
Add/Erase
Press to add or erase channels
in the TV's memory,
controls
Controls VCRtape functions:
Rewind, Play, Fast Forward, Stop,
Pause.
PiP
Controls
Source
Press to select one of the avail
able signal sources for the PIP
window,
Scan
Press to memorize (scan) the
available channels,
Locate
Press to move the PIP window to
any of the four corners of the TV
screen,
Exchanges the video signal that
is currently displayed on the
main screen with the signal in
the PIP window,
Size
Press to make the PIP window
small, large or double screen,
• Double window doesn't func
tion on models HCM5525WB/
HCM4715W/HCM4215W/
HCM4216W/PCM5415R,
614
Displays the available channels
in sequence, (These buttons
change channels in the PIP win
dow only).
C]I_P
ii
ON}: Yot}}_ NI;_
IV
1.6
INSTALLATION
Connecting
VHF
and
UHF
Antennas
If youz antenna has a set of leads that
look like this, see "Antennas with
300 ohm Flat _vin Leads," below.
If youz antenna has one lead that looks
like this, see "Antennas with 75 ohm
Round Leads," oil page 2.2.
If you have two antennas,
VHF and UHF Antennas,"
Antennas
with
see "Sepai-ate
oil page 2.2.
300-ohm
Flat
Twin
Leads
If' you aze using an off air antenna (such as a zoof antenna
ohm twin fiat leads, follow the dizections below.
Place the wires from [h_
twin leads under the
screws on the 300_75
ohm adaptor (not supplied). Use a screwdriver
_etighten the screws.
2
Plugme aoaptorintothe
ANT-Aor ANr-Bterminal
_n the rearpanel.
i
or "zabMt eazs") that has 300
INSTALLATION
Antennas
]
with
75-ohm
Round
Leads
Plug the antenna lead
into the AN%A or ANT-B
terminal o
Separate
VHF
and
UHF
Antennas
If you have two separate antennas foz your TV (one VHF and one UHF), you must combine
the two antenna signals befoze connecting the antennas to the T_ This pzoceduze requh-es a
an optional combinez adaptor (available at most electronics shops).
Connect both antenna
earls to the combiner.
2
3lugthe combinerinto
Connecting
Cable
TV
You can connect different cable systems to youz TV, inciuding cable without
and cable with a cable box that descrambles
some oz all channels.
Cable
If you
without
want
a Cable
to connect
eabIe,
a cable box,
Box
and you
do not
need
to use a cable
box:
Plug the incoming cable
into the ANT-A or ANT-B
antenna terminoi on the
rear of the TV.
(}
I,\P]
l _(
/
]NSIAI
AI(
/N
_
*2
INSTALLATION
Cable
with
]
a Cable
box
that
Descrambles
All Channels
terminal might be
Iabeled" ANT OUT'r
Connect the other end of
this cable to th_
or ANT_Bterminal on the
rear of the TV,
Connecting
to
]
a Cable
Box
that
Descrambles
Some
Channels
If your cable box descrambles
orgy some channels (such as premium channels), fallow the
instructions
below. You will need a two way splitter, an RE (A/B) switch, and fuur lengths of'
coaxial cable. (These items are available at most electronics stores.)
This terminal might be labeled
"ANT IN," "VI [F IN," or simply,
"IN."
,-indanddisconnectthe
cable mat_sconnectee
to the ANTENNAIN ter- _(]
IN NA
mmal on your c_bJe box,
2
Connect this cabJem a
[wo-way SplIEeL
neemleg
8plKler
3
CoRnet[
a coaxial cable
3etween
an OUTPUT [er
"Rli]al oR Ltle S_ Lter ai1c
[ne {N terminaI otl the
cable box.
2.3
(HAP]
I IV(}
]NSI\I],\I_N
riP.orrllrlg
CableBox
]
INSTALLATION
4
/
Connect a coaxial cable
betweentheANTENNA
.
OUT terminal on the
cable box and the B: !N
nr_[_]
_-_
]_
Incoming
Cable1
Splitter
RF (A/B)
8whch
Cable Box
terminal on the A/B
Connect another cable
between the other OUT
_
terminaJ on the splitter
and the A- IN terminal on
the RF(A/B) switch,
Irrupting
¢,a_e
8plffler
RF(A/B)
Swnch
CableBox
Connect i
cable between the OUT
terminai on the RF(A/B)
switch and the VHFIUHF
terminal on the rear o[
the TV.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
After you've made this connection,
set the A/B switch to the "A" position for normal view
ing. Set the A/B switch to tile "B" position to view scrambled channels. (When you set the
A/B switch to "B," you will need to tune your TV to the cable box_ output channel, which is
usually channel 3 or 4.)
(}
I,\P]
1%_11
]NSIAI
AII(/N
2.4
INSTALLATION
]
Connecting
a VCR
These instructions
assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions
oil pages 2.1 2.3). Skip step 1 if you have
not yet connected to an antenna or a cable system.
TV RearPanel
Connect a coaxial cable between the
ANTENNA OUTterminal on the VCRand the
antenna [ermmal on me [V,
A coaxial
VCR
cable
Ifnot
is usuall
che__
z ixlduded
wilh
otlrJocmelect_mic_
_[oi'e
2
Connect a set of audio cabIes between the
AUDIO OUT acks on the VCRand the
AUDIO ,acks on the
[l y _t_have a mono VCR. connect _ mol_o
{JVCR midio out usitlg oiny o[le at_cllo
-able
3
Connectavideo cablebetweenthe VIDEO
OU] ackonthe VCRandthe VIDEO)ae_on
the TV.
[1 yoIl have a S-VIIS
"OrlKIOCklOXIS
aglCl
Do no_ com_ect
Video
cable
VCR use the S-Video
IFIP video
cable.
II_lnove
the video
c_ble and the S
VCR RearPanel
to Video 1 slmmtaneoI_sly.
FoJlow the instIucUons
orCamcozdeiTape
in "Viewirlg
tovle
a VCR
yourVCRlape
Note: This figure shows tile Standard Connactol_jack panel. The actual configuration
be different, depending on tile model.
2,5
(lI_}*]
I
IV()
INS
\llf
()N
on your TV may
I
I
Connecting
a Second
VCR
Your TV can send
out signals
this,
second
connect
your
to
Record
of its picture
and
from
sound
the
TV
to be recorded
by a second
VCR. To do
VCR as follows:
13/RearPanel
Connect a set of audio canes between
[he AUDIO OUTjacks on the TV and the
AUDIO INJacks Qnth_ VCP_
(TheVCR inputjacksmightbee!th_r
2
Connect a video cable between the
VIDEOOUTjack on the TV end the
VIDEO IN jack on the VCR.
Retbr to yore VCR's inslmctions for
more intbrmation about how to £ecord
VCRRearPanel
Connecting
a Camcorder
'File side panel jacks orl your TV make it easy to connect
you to view the cameorder
tapes without
using a VCR.
1
a eamcorder
to your
TV They
allow
TV Side Panel
Locate the A/V outputjacKs on me
camcomer. They are usua_q found on
me s_deor rear of the camcorde r
2
Connect an audio cable between the
AUDIO OUTPUI jack on the camcorder
and the AUDIO terminals on the side of
the rV.
[t yOtl
have
L{moHo/
rnoHo
to
gatl_gordpi
camcor(lpi
COl-l]lpc[
aucuo
out
using
on]3 one audio cable
3
3onnect a video cable between the
VIDEO OUTPUT ack on the camcorde|
and the VIDEOtermma_on me sme[ 3f
me TV.
]'he arid >-video callles shown heIe aIe
usual] included with a CaInroi_ter if
QO[
ght_ck
H yOtlY
OflIleC_
Note:
g[)[_[
a set
P]P[I[OIlICS
_[)[a_
caII]COlQpF
is
O_ _WO
S[PIPC
S[OrP
oil
neg_[_
[O
cables
This figme, shows tile Standard
be dif[emnt,
depending
Connector,jack
panel.
The actual
configuration
on your
TV may
on tile model.
(}
I,\P]
_ %_(
/
]
SIAl
AI
( /
2,6
INSTALLATION
]
Connecting
(480i,
480p,
The
rear
panel
jacks
a DVD
1080i)
on your
Player,
TV make
DTV
it easy to connect
Set-Top
a DVD player
Box
(or DTV Set Tup
Box) to yourTVI
Connecting to Y, P., P.
TV RearPanel
1
Connect a set of audio cables between
the DVD audio injacks on the TV and
the AUDIO OUTjacks on the DVD player
(or DTV Set:top Box.
2
To enable Component video viewing,
Connect video cables beLweenthe Y, Ps,
and P_inputs on the TV and Y,P_,and P_
(o_ ¥, C., CJ_)
outputs on the DVD p_ayer
or DTV Set-Top Box.
DVD Pleyer/D_/Set-T0pBox
Connecting to regular audio and video jacks
TV RearPanel
Connect a set of audio cables between
the AUDIO IN jacks on the TV and the
AUDIO OUT acks on the DVD player
lot DTV Set:[oo Box)
2
Connect video cables between the
VIDEO OUTjack on the DVD p_ayer
'or DTV Set-Too Box) and the V DEC
INjack on the TV.
DVD Player/DTVSet-TopBox
Note:
This figure
be different,
2.7
(IIA}*]
I
INSI\I]AI
/)N
shows ttl_" Standald
depending
on tile model.
Connac'tol=jack
pan_'I.
The acmaI
configuration
on yo_ir TV may
INSTALLATION
]
Connecting
a DTV
When switching
according
to the
to the DTV mode,
input signal.
Note:
Only
480p
and
1080i
formats
Set-Top
eitheI
de0p
Box
oi 1080i
foImat
(480p,
1080i)
is automatically
selected
are supported.
"iVRealPanel
Connect a set of auato cables between
the DTV Set-ToE}Box audio in acKs on
the TV and the AUDtO OUT _cks on the
DTV Set-ToEpox
2
Toenable Component video viewing.
2ortrtec[ vtt3eo cables between the Y. P_
andP,dnoutsontheTVandY
P_ andP
iorY. C,. C,I out[}uts on the DTV SetZ[oD
30X
No[e_
FoF
24n Pxplar[euon
Com[ _nent video see
_.019 ]dOXt;
OWIleI'_
oJ
3uI DTV Sel
ln£tFI_CUOl
DTV Set-T0p Box
(}
I,\P]
l _(
/
]NSIAI
AI
( )N
2,8
INSTALLATION
Installing
]
Batteries
in the
Remote
Control
Make
sure to match
the "+" and
"--" ends of the batteries
diagram
inside
Remove
them
with
the batteries
and store
in a cool, dry place
be using
the
the compartment.
the remote
if you won't
control
for a
long time.
The remote control can be used up
to about 23 tbet from the TM
(Assuming
Batteries
typical
TV usage,
last for about
the
one yeai_)
OPERATION
Turning
the
TV
On
and
Off
Press the Power button,
You can also use the POWER
Plug
& Play
button
on the tbont panel.
Feature
When the TV is initiaI[y powered
On, five basic customer
settings
proceed
automatically
and
subsequently:
Setting the language,
Ant. input check, and Auto program/Setting
the Clock.
1
Press the Power button on
the remote control.
i
p_&P_y
The message" Ptug & Play"
is displayed,
It flickers for a little while and
then the _Language" menu is . ...........................................................................................................................................................
automatically displayed
Press the VOL + or VOLbutton to select the desired
language. Press the Menu
button to enter the language,
and then the YANT/CATV"
menu is autom@ticatty
displayed,
3
Press the VOL+ or VOLbutton to select the aes_reom
video stgnaI source.
Press the Menu button to
enter the video signal source
and then the "Ant Inau[
±_loet
IE_t
check" is automauca.y
amp_ayec
continued...
(2HAl,l}
1¢ IEl}¢i
IV
()PHAIlON
3.
1
OPERATION
]
¸4¸¸¸¸
Make sure that the antenna
is Connected to the TV.
(
i_IT
4
i
And then press the VOL+
or VOL- button to activate
"Auto Program" or press the
MENU button to skip,
(refer to _Auto program"
Press the VOL+ or VOLbutton to move to the hour
Qr minute, Set the hour or
minute by pressing the
CNAorCNv
button,
(refer to" Setting the clock"
When you have finished,
press the Menu button.
The message" Enjoyyour
_ov Your
wat_.u..
watching.," is diepJayed.
7
If you want to reset this
feature
(1) Pressthe Menu button,
(2)Press the CH v button
three times to setect the
Function menu and pree
the VOI + button.
select 7Piug& Play" and
press the VOL+ button
The message _Plug &
Play" is displayed,
Note: Plug & Play feature doesn't
on oi- when in the A/V mode.
3.2 (;.,,1., h]._.: rv o,,}},,,,i,
,N
woFk when the Vchip
is
]
OPERATION
Using
the
Perfect
Focus
Feature
When the picture size is distorted after moving the TV set use the Perfect Focus feature to
adjust for the optimum picture size set in the Factory.
-_ You can also select Perfbct
Focus by pressing the Perfect Focus
button.
Press the CHV
button to
select "Convergence", then
press the VO[ + button.
3
Press the CH v button to
select" Perfect Focus", tbe_
Dress the got + button,
Perform Perfect Focus in the
[olIowing sequence: Green
Rec _ Blue.
Press Menu button to exit,
/
iiTZi
...........
nr:_
i
3
Notes
• If any error happens during Perfect Focus, then perform Perfect Focus once again.
• If'you can't make adjustments after Perfbct Focus, then make manual adjustments.
Still you can't make adjustments, contact your Service Center.
• The Perfect Focus function doesn't operate when component input is in 480R
(2HAI']}}¢
IHRi
IV
()P}
AIlON
3.3
OPERATION
]
Adjusting
Manual
If' the color appears
alignment.
Be sure
Convergence
spread
out or "smeared"
to use the remote
control
on the screen, the convergence
for tile convergence
adjustments.
Fh-st steps:
Press the Menu button.
Language
: Enfllisll
Press the Cl.lv button to
setect ?Function", then
press the VOL+ button.
2
Press the City
button to
seiect" Convergence", then
press the VOL+ but[on.
The _Manual Convergence"
screen will appear, and the
Convergence
R_d
I*
word _Red" wi!i be high_
Iighted:
iiiiiiii_iiiiiiiiiiiiiii_i_i_iiiiiiiiiiiiiiiiiii_i
continued...
3.4 c.,,],], l,]._., rv o,,}},,,,i,
,N
probably
needs
]
OPERATION
Adjust
Red
Convergence
4
White" Red" is highlighted, press
the VOL+ button A crosshair
R=_u_m_==_,
=_a
pattern Will appear on the screen
After moving the cursor to the
pOSlbOn you want m aajust Using
the number buttons 2{upl, 4(leftl
2.&&5:P_t_
o:_
•
IMwva
uG_e_'a ± t_
6{rtghtL 8taowm on me remote
control aejust Red Convergence
by pressing the'gOt +1MOLJ0B/x
!OHv buttons,
f a horizontal red Itne _s visible use
CHA
and CHV
buttons to move
pbau
we _mom =onm_
Rad
the Iine so that i1 is sugerlmBosee on
[Be no[izon[al center4ine (i,e., make
a single horizontal line that is as
WRite &is DOSSIDle.t
A
v
U_own
;_ UR
[]Menu
6
"a vertical rea line is VISIBle use
the VOL + and VOL - buttonsm
pla_m, use mmow _ormo
Red
move the hne so that _t _ssuperim_
posed on the vertical-center
,he
/i.e.. make a single vertical line that
2.4.8
S:P_rdon
@ UWDown
0:R/B
;at;taR []Menu
ISaS WRite aS DQSSIDteJ
7
For 'Blue' ad*ustmenL no me same as me above.
After the red convergence is correcdy adjusted, press Menu to exit
att the menus,
(2HAI,llR
IHRi
IV
()P}
AIlON
3.5
OPERATION
Viewing
Viewing
]
the
the
Menus
and
On-Screen
Displays
Menus
_1
1
The on-screen
f_'om the screen
menus
after thirty
disappear
seconds.
With the power on press
the Menu button
The" Picture" menu
appears on the screen,
tts left side has hve
icons: Picture, Sound,
Press the CH/N or CH V button to the move items in the menu
(the icons blink when highlighted), Press the VOL ÷ or VOL- button to
display, change, ot use the selected items. Press th e VOL+ button to
enter items in the menu,
-91 You can also use the Menu,
CHANNEL, and VOLUME buttons
on the control panel of the TV to
make selections.
Press the Menu button to exit,
Viewing
the
Display
The display identifies
the current
channel
and the status of certain
audio
video settings.
-ql The on-screen displays
disappear after ten seconds.
Press the Display button on
the remote control.
The TV wiii display the channel, the type of audio, and the
status of certain video and
audio settings,
("
" indicates a channel has
be_n manual!y fine tuned.)
36 (:.,,1., h]i_.]:rv o,,}},,,,i,
,N
m
_,_n
=
:
]
OPERATION
Selecting
a Menu
Language
Press the Me_ button.
Press the CH v button to
select" Function", then
press the VOL + b_tton.
Press the CI-Iv button to
select'! Language",then
press the VOL+ or VOL.
button to select the Ian
Press the Menu button to
exit,
Selecting
You can connect
Antenna B),
..........
the
;
Antenna
to tvvro different
signal sources
Input
by choosing
the antenna
input
(Antenna
A or
Press the Menubutton,
Pressthe CHv button
to select'!Channel",
then pressthe VOL+
buttonto enter.
2
Press the VOL + or VOL.
button to select _A" or_ B",
Press the Menu button to
exit.
i
(2HAI']}}¢
IHRi
IV
()P}
AII()N
37
OPERATION
]
Memorizing
the
Channels
Your TV can memorize and store all of the available channels for both "off' air" (antenna) and
cable chanrle[s. After the available channels are memorized,
use the CH A and CH V but
tons to scan through the channels. This eliminates the need to change channels by entming
the channel digits. There are three steps for memorizing
channels: selecting a broadcast
source, memorizing
the channels (automatic) and adding and deleting channels (manual).
Selecting
the
Video
Signal-source
Before your television can begin memorizinf_ tile available channels, you must specify tile type
of' signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press
theMenuoutran
Press the CH v button to
select" ChanneI". then
press the VOL + button
Pressthe CHv buttonto
select"ANT/CATV",then
PresstheVOL+or VOI.
buttonto cyclethrough
thesechoices:
ANT
or IRC(all cableIV).
Note: STD, HRC and IRC identify various types of' cable TV systems. Contact your local
cable company to identify the type of' cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to "Storing Channels in Memory"
(next page).
38
C}l,x],]{iI]]R}{]:rv ()},}{},,.,i,,N
]
OPERATION
Storing
Channels
in Memory
(Automatic
Method)
1
First.select the correc[
s_gnaIsource rANT. STD
HRC,tRCI, See steps 1-2
on previous page,
Press the Menu button
Press the CH v button to
select ° Channel' men
press the VOL+ button
2
Press the CH v
button to
select" Auto Program _, then
Dress the VO[ + button.
AUtO Program
_M_'e
•
i_t
_E)dt
The TV automatically
3
through
_P_mm
_4
The TV will begin
all of the available
cycles
chan-
nels and stores them in memory.
This takes about one to two min-
memorizing all of the
available channels
utes.
Alter all the available
cban_els
are
s[oreG
[he
mBdt
Auto program menu reap_
[}ears. Press the Menu
DUttORtOextt.
Adding
and
Erasing
Channels
(Manual
Method)
Use the number buttons to directly select the channel
that wiIl be added or erased,
Press the Add/Erase button:
Repeatedly pressing this button will alternate between
"Added" and" Erased£
Press the Menu button to exit,
Yuu can view any channel
(including
buttons on the remote control.
an erased
channel)
by using the number
CH,',,P]}}¢IH}¢_
IV ()P} AII()N
39
OPERATION
]
Changing
Using
the
Channels
Channel
Press the CH/X or CHV
Buttons
button to change channels.
W'hen you press GHA
or CHv,
nels that the TV has memorized.
not see channels
that were either
Using the Number
the TV changes channels in sequence. You will see all the chan(The TV must have nmmorized at least three channels.) You will
erased or not memorized.
Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7!i The TV
wilt change channels when you press the second number.
When
you use the number
buttons,
you can directly
select
channels
over 100, press
the +100 button.
(For channel
(0 9) faster, press
"0" betore
that were either
erased
or not
then
"2," then
IlleI_lorized.
To select
a channel
122, press
"+100,"
"2.")
To change
press
to single-digit
"0," then
Using
the
channels
"4.")
Previous
Channel
press the pre-CH buttQn, The W changes
you were watching.
to the last channel
the single
digit.
(For channel
"4,"
]
OPERATION
Selecting
Your
Favorite
Channels
You can store up to ten of your favorite channels for each available input source (such as TV
and CATV). Then, when you press the Fav.CH button oil the remote control, the TV displays
only the favorite channels you previously stored, allowing you to quicMy and easily flnd fre
quently watched channels.
To Store
Your
Favorite
Channels:
1
Press the Menu button
Press the CH V button
to select" Channel
then press the gOL +
DUtIOR
2
Press the CH v button m
select _Fav,channet men
aress the got + button,
_1 Note: Only memorizect channels
can be set as Favorite channe]s
Press the VOL + or VOLbutton to select the first
channel,
lo select more favorite
channels,
press CI-IA or
lo erase the memorized
Favorite Channel, setect
the channet by pressing
the VOL+NOL. buttons
and then press the
Add/Erase button,
To View
Your
Favorite
Channels:
Press the Fav.CHbutton repeatedly tojump from one favorite
channel to another.
CH/,a']H_ ]H}_II IVOPt
A]]()
3.q
q
OPERATION
Adding
]
and
Erasing
Channels
1
Press the Menu button.
B_ess the CH V button to
select"
Channel",
then
press me VO[ + button
2
B_essthe CH V button [o
select" Add/Erase ther
Dress the VOL + button
_ Idlmw
_Se]_t
J_dt
3
B_ess the VOL + button
men oress CH A I CEl v
or numoer DUt[OrlS 10
select the channe you
wan[ [G a(](] OFerase
Press t]e Menu button.
4
Press the CH A ot
CI-Iv buttor to se_ec_
Select",
B'ess the VO/+ or VOLbutton to se act"Adde_
or" Erased'
Press the Menu button to exit
[he menu.
Se[ecl
: Added
(Manual
Method)
]
OPERATION
Labeling
the
Channels
Use this feature to assign an easy to remember label to any channel (i.e., "CBS", "ESPN",
"PBS2", CNN1% etc.) A [abel consists of four fietds, where each field is a letter, a num
bet, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press CHA or CHV
m rune m me channel that will be labeled
_1
2
Note: You cannot
se]ect
"Labeling '_ in the A/V mode
Press the Menu button
Press the CH v
seiecT
button to
Channel"
men
press the V0L + Button
_MM
_. Se]emt
gBdt
3
Press the CH v but[on To
select ° Labeling
Dress me VOL+ button to
Degm _aBenng,
The left-most field will be
mgn.gnmo,
Each label has four fields.
See top parag/aon.t
4
Press the CH A
or CH V
button to seIect a _etter
a number, or _1blanK,
_Pressthe CH/N or
CH v button results m mls
seouence:A.B .Z. blank
&l ,..£
5
Press the VOL + bu[mn
switch
to the next field
wh ch will be nlgnllgrlteo,
Select a second letter or
Digit pressing
CH g buttor
me _H A
as above,
Repeat the process m
or
ABC
Laue_
ng
_1_
M_
B E_I
select tile Iast two oigt[s,
Press the Menu button to exit the menu,
(>/,P]H_]H}_HiV OPt A]]( 3.1 3
OPERATION
Picture
]
Control
You can use the on screen menus to change the contrast, brightness,
tint, color, and sharpness
according to personal preference.
(Alternatively, you can use one of" the
"automatk" settings. See next page.)
Customizing
the
Press the Menu button,
Xl
ii
i iii
Picture
Mode
: Custom
ii
The" Picture" icon will be
highlighted, then press the
Z
VO/÷ or VO/- button repeatedty,
uetil
the word
"CUStOm"
is selected,
•....
Press the CH V button to
select "Adjust _, thee press
the VOL + button,
(The words Contrast,
Brightness, Sharpness,
3
Press the VOL+ butto_
_Thewords Contrast,
: 80
Brightness, Sharpness
Colo- and Tintwill appear
on me screetl _Press the
CHA c CHv button to
select a particular item.
_ AdjuM
I[l_dt
-ql
4
After a@usting
an item, the
gauge wilI automaticalIy
Press the VOL+ or VOLbutton to increase or
decrease the value of a
parucui_ir
_M_
terfl
disappear(after
about
4 seconds).
]
OPERATION
Using
Automatic
Picture
Settings
Your TV has three automatic picture settings ("Dynamic", "Standard" and "Movie") that are
preset at the factory. Yuu can activate either Dynamic, Standard or Movie by pressing RMode
(or by maMng a selection from the menu). ©z, you can select "Custom" which automatically
recalls youz personalized
picture settings.
Press the Menu button,
Picture icon wiII be high-
Mode
:Custom
Mode
:Dynamic
lighted.
Press the VOL+ or gOLbuRonto select the
"Custom%°DynamicU
_Standard" or _Movie°
picture setting,
Alternate method:
Simply press the P.Mode
button on the remote
control to select one of
the standard picture
settings.
Standard
Choose
StandaM
for the standard
Choose
Dynamic
fbr viewing
light
settings.
the TV during
the day or when there
is bright
in the room.
Choose
Movie when
Choose
Custom
erence
factory
viewing
the Movie.
if you want to at!just
(see "Customizing
the Picture,
the settings
according
to personal
pref _
page 3.14).
c./,P.}_ ]H}_HiV On A]]( 3.1 5
OPERATION
]
Selecting
the
Color
Tone
1
Press the Menu button.
They Picture" icon will
be highlighted, Then
press t_e VOL÷ button,
Press the CNV button to
select" Color Tone"
3 {
(/(
Press the VOL ÷ or VOLbutton to select" Normal" i
?Warm1"; "Warm2", "Coot2"
Press the Menu button to
i
..............................................................................................................................................................
exit.
Sound
Control
Adjusting
the
Volume
Press the VOL + or VOL- buttons to increase or decrease the volume.
Using
Mute
At any time, you can temporarily
cut off the sound
using the Mute button.
Press the Mute button and the sound cuts off.
Theword" Mute" win aPpear in the Iower-ieft corner of the screen
To tern m_te off, press the Mute button again, or simply press either
the VOL- or VOL÷ button,
]
OPERATION
Customizing
the
Sound
The sound settings can be adjusted to suit your personal perfbrences.
Alternatively, you can use one of the "automatic" settings. See next page.)
Press the Men u button+
Press the CH v button to
select _Sound"; the press
the VOL÷ button.
Press the VOL+ or VOL button repeatedly, until the
word"Custom" isselected.
(When Custom is selected,
the words" Equalizer_ wilt
appear on the screen,)
Press the CH v button to
select _Equalizer" then
press the VOL+ button.
Press the I/OL + or I/OLbutton tO highlight a partita 7
far item to be changed.
Press the CR A or CHV
button to increase or
decrease the vaIue of a
particular item,
Press the Menu button exit,
CH/,a']H_ ]H}_II iVOPt
A]](
3.q
7
OPERATION
Using
]
Automatic
Sound
Settings
Yuur TV has four automatic sound settings ("Standard," "Music," "Movie," and "Speech") that
are preset at the factor_ You can activate either Standard, Music, Movie oi- Speech by press
ing the &MODE button (or by making a selection from the menu). Or, you can select
"Custom," which automatically
recalls your personalized
sound settings.
Press the Me.. button
Press the CH N/button to
select the _Sound"; then
press the gO/, button.
2¸¸/¸¸ ¸
{
Press the VOL. OrVOI +
Mode
button repeatedly to select
the _Standard," _Music,"
"Movie," "Speech" or
Standard
"Custom" sound settings.
/
Alternate method:
Simply press the &MODE
button on the remote control to select one of the
Standard sound settings.
$_anda_d
Choose
Standard
Choose
Music when
for the standard
Choose
Speech when
watching
a show
Choose
Movies when
watching
movies.
Choose
Custom
watching
to recall your
factory
music
settings.
videos
or concerts.
that is mostly
personalized
settings.
dialogue
(i.e., news).
]
OPERATION
Setting
the
Clock
Setting the clock is necessary in order to use the various timer features
you can check the time while watching the TV[ (Just press Display)
Option
1: Setting
the
Clock
of' the TV. Also,
Manually
1
Press the Menu button
Englsfl
Press the OHv button to
select" Function", then
Dress the VOL + button,
2
Press the CH v out[on m
select" Time men_
T_m_
Clocl
oo
ooar_
Press the VOL+ button: The
time menu will aDoear on
me screer and _Clock" wilI
be highhghte&
-41 When selecting the hou*s, be
sure to select the proper time of day
(AM or PM).
3
Press the VOL + button
again itne nours digit._
wilt Denighlightedt
Press the CH A or
CH v button repea[eal}
until the correct nou[
appears
-41
4
The time will appear
you press the Display
every time
button
Alter the hour is enterea.
Press the VOL + button
_[ tills point the minutes
digits will be highlighteOL
Press me CH A OCH N/ button to select
the correct minutes,
@ Adjt_lt
•
MOW
mJ_it
Alter selectlrlg me cod
rect mlrlutes, Dress the
VOL+ button
Press the Menu button to
exit
(;H/,P]H_]H}_HiV OPt A]]( 3.q 9
OPERATION
Option
the TV
2: Using
Clock
]
the
Local
PBS
Channel
to Automatically
Press the MENU,
Press the CH v button
to select" Function",
then press the VOL_
button
¸¸2¸¸¸¸¸¸¸¸
¸
i!!!!!!!_iiiiiiiiiiiiiil;_tiiiiiiiiiiiiiiiiii!_iiiiiiiii
>
Press the CH x/button
to select" Auto clock
set" menu, then Press
the 1/01.+ button,
Press the V01. + button to
select Auto clock set
_ Orl",
tiiiiiii_!_[[[[[[[[[[[[[[[_iS_[[[[[[[[[[[[[[[[[[]_!_a##
Press the CH V button
to select" PBS channel" While" PBS channel" is selected, press
the t/01.+ button to
activate the channelnumber field.
Press the 6H i or
CH v button to select
your local PBS chan_el.
continued...
Set
OPERATION
Press the CI-Iv
]
button to
select _Time Zone'.
While "Time Zone* is select-
t,_e Zone
: EAST
DST
: Yes
]]]]]]]]
eo. men press [ne VOL+or
VOL- to change the Time
zone.
Seouence: ATL. EAS_ CEN
MTN PAC.ALAS HAW.
Press the CH V button to
select ° DST"(Daylight saving
time). While YDST is selected, press the VOL+or VOLbutton to indicate "Yes" or
The clock is set,
Press the MENU button to exit.
(;H/,,P]H_
]H}_HiV OPt A]]( 3.21
SPECIAL
Fine
FEATURES
Tuning
Use fine tuning
Channels
to manually
adjust
a particular
channel
for optimal
reception.
1
Select the appropriate
channe
Press the Menu button
Press the CH V button to
select the" Channel" men
oress the VOL + button_
2
Press the CH V button to
select ° Finelune"
_Mo_s
_Adjm
g_it
_1
3
Press the VOL + or VOL-
Display
DUt[OR tO aajustthe fine
[unlRg
4
To store the free tuning
setting inthe TV's memory,
Dress the CH/_ button.
,A star icon<*>will appear.l
1o reset the fine tuning [o
° 00%Dress the CH V button
Press the Menu button to exit.
41 (.,,,,.
l(t,i _l,_IAIFIAItH]S
After you at!just
"*" will appear
@ Add/_ratm
d_8ek_t
g_dt
when
while watching
the fine tuning,
you press
this channel.
SPECIAL
FEATURES
Digital
Noise
If' the broadcast
Reduction
]
signal
%ature
Reduction
received
to help
by your
reduce
Press the Menu button.
TV is weak,
any static
and
Mode
you
ghosting
call activate
that
the Digital
may appear
Noise
on tile screen.
: Custom
Press the CH V button
to select" Picture", then
press the VOL+ button.
Press the CH v button to
se!ecF Digitat NR":
i
sdect
B
Press the VOL + or VOLbutton to setect t On°,
Press the Menu button to
(]}I,\P
11
_(t)}
S}'E
IA]
}l'_]t)RlS
4.2
SPECIAL
FEATURES
Changing
]
the
Screen
Size
4:3 TV
_:i"¸
Wide
TV
_!_;)i12
[_W ''¸¸ _7:_ii:;_i!
'
[
n_, ._...........
(16:9)
Panorama
DVD
[
4:3
:
I
• Wide:
• Panorama:
• DVD:
• Zoom:
• 4:3(Normai):
• Cinema:
i
Cinema
.....
Panorama
DVD
4:3
Cinema
Sets the picture to 16:9 wide mode.
Use this mode tbr the wide aspect ratio of a panoramic picture.
Magnifies the size of the picture and moves the magnified picture up.
You can also move the pictm'e on screen pressing the Ctl/x or CtIV button.
Magnifies the size of the picture on screen.
You can also move the picture on screen pressing the Ctl/x or £tlv button.
Sets the picture to 4:3 normal mode.
The broadcasting signal is enlm_ed automatically to optimum screen size.
The margins appear grayed.
Notes
Changing the Screen size doesn't work with ComlJonent 1, 2, 3(480p) signals.
The PCM545P,/PCM5415R models operate olny Zoom function with Componentl,
2, 3
(10800 signals.
Screen size cannot be changed in the PIP mode.
It'spossible to be a little diflerence to perform a grey letterbox by the specification of the DVD
or VCR Tapes.
4.3
(}IAP
_[
]OUI
SI'}
IAI
FIAIUI]S
SPECIAL
Using
FEATURES
the
I
R.surf
feature
This feature aI[ogx,'syou to set the TV to return to a particular channel after a certain amount
of' time. For example, you may be watching
a ehamlel when commercials
start. You can set
the R.Surf to "5 minutes", then sgv[tch channels. After ,5 minutes, the TV will return to the
original channel
To use the R.surf:
While you are watching
s.,_ o,
the channe{ to which you
want to return, press the
ILsurf button, The onscreen disP!ay wil ! read
Surf off",
..............................................................................................................................................................
Press the R.surf button
again to set the timer in
thirty second intervals,
up to five minutes.
The time you set wilt begin counting down on the screen. When the
time rune out, the TV will return to the channel you were watching
when YOUset the timer.
(}I,\P
11
_(t)l
S}'I
IA]
_1%]t)}#iS
44
SPECIAL
FEATURES
Setting
the
]
On/Off
Timer
-q
Before using the tinier, you must
set the TV's clock.
Press the Menu button.
Clock"
Language
(See "Setting
the
on page 3.19)
: English
Press the CB V button to
select _Function", then
When
any of the timers
"Timer"
press the VO[ 4-button.
are set, the
LED will illuminate
(front
.....................................................
panel of TV).
Press the CH N/button to
select"Time", then press
the VOL+ button,
When
Press the CH V button to
selec! "On time".
Press the VOL+ button to
select the _Ontime _ hours,
(Thehours digits wilt be
highlighted,)
PresstheCH/k
or CHV
button repeatedly to select
the appropriate hours (Le.,
the hour when the TV wilt
turn on.)
Press the VOL+ button
to select the "On time"
minutes.
(The minutes digits will be
highlighted.)
Press the OHA or OHv
button to select the appropriate minutes
45
(.,,1,. l()t,i sP} IAIFIAIt)I]S
you set the hours,
make
sure the correct time of day (AM or
PM) appears to the left of the hour.
Or,T_me
06: O0amof_
I
SPECIAL
FEATURES
I
To deactivate
s
select
the "On time,"
"Off" during
this step.
Press the',/OL + button to
select _On/Off,"
Press the CH A or
CH g button button to
turn the on4imer" On,"
(Repeatedly pressing the
z
ZZZZZZZZZZZZZZZZZ
_,=
If no tunction
(including
TOset the Off time, press
the 611V button to select
front
three
buttons
remote
buttons
or
panel buttons)
are operated
hours after the TV is turned
control
tor
on
with the by "On time"
tbature,
TV will be automatically
Press the VOL+ button
and set the heats and
turned
the
off.
minutes. (Follow the same
above.)
When finished setting the timer, press the Meeu button to exit,
Setting
The
sleep
the
timer
Sleep
automatically
shuts
Timer
off the TV after
a preset
time
(from
10 to 180 minutes).
After about
Press the Sleep button on the remot e controI
display
screen,
_2
a seconds,
the sleep
will disappear
from the
and the time interval will be
set.
Press Sleep repeatedly until the appropriate time interva!
appears (any of the p_eset values from _Ot7 to _1807).
(ll,\p
1[
}()[)l
SP}
IA]
}I%]URiS
4.6
SPECIAL
FEATURES
Extra
sound
The following
]
settings
sound settings
(Surround,
can be adjusted
Auto Volume,
to suit your persoila]
Melody,
BBE)
prefbrences.
Belbro using tho timer, you must
1
Press the Menu button
Press the CH V button to
select" Sound" men
oress the VO[ + button,
Mode
: CUS[Ora
set the TV's clock. (See "Setting
Clock" on page 3.19)
When any of the timers are set, the
"Timer" LED will illuminate (fl'ont
panel of TV).
2
Press the CH v button to
select '%.Function, men
press the VOL + DU[[OP
3
Press the CH/X or CH V
button button to select the
reouired itern, the press the
VOL + button to select "On
Press the Menu button to
8Xlf
Surround
Your Samsung TV can create a "surround"
effbct such that the sound seems to come
from aI[ directions. Once the "Surround" is set to "On", the setting applies to sound
efli_cts such as Standard, Music, Movie and Speech.
Auto Volume
Each broadcasting
station has its own signal conditions, which cain make it necessary
to adjust the volume every time the channel is changed. "Auto volume" lets you auto
maticalty adjust the volume of the desired channel by lowering the sound output when
the modulation
signal is high or by raising the sound output when the modulation
signal is low.
Melody
You cain }neardear a melody sound when the TV is powered on or Off'.
BBE
BBE is a built in eft'err that adds clarity, punch and dynamics to the sound.
47
(.,,1'.
]ouI
Sl,}
IAI
FIAIUIiS
the
SPECIAL
FEATURES
Choosing
Soundtrack
]
a Multi-Channel
Sound
(MTS)
Depending on the particular program being broadcast, you can listen to stereo, mono, or a
Separate Audio Program. (SAP audio is usually a foreign language translation.
Sometimes SAP
has unrelated information
Iike news or weather.)
Quick
1
Press the Menu button
way to access
the MTS
menu: Just press the "MTS" button
on tile remote control.
: custom
Press the CFIV button to
select" Sound" men
Dress the 1/01.+ button,
_1
2
The text at the bottom
menu
audio
Press the CH V button to
select" MTS" then Press
the 1/01.+ or 1/01.- button m
semct" Mor x ° "SAW or
of the
tells you if the incoming
is Stereo, SAP, or Mono.
"Stereo.
Press the Menu button to exit
Choose
Stereo
for channels
that
are broadcasting
in stereo.
Choose
Mono
for channels
that
are
in mono,
having
difficulty
receiving
Choose
SAP to listen
foreign
language
to the
a stereo
Separate
broadcasting
or if you
are
signal.
Audio
Program,
which
is usually
a
translation.
(}I,\P
iI
_()t)l
SPl
IA]
_I'_]t)}¢IS
_.8
SPECIAL
FEATURES
Viewing
]
Closed
Captions
YourTV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles fur the hearing impaired or foreign language trans
lations. All VCRs record the closed caption signal from television programs, so home record
ed video tapes also provide closed captions. Most pre recorded commercial video tapes pro
vide dosed captions as well. Check for the closed caption symbol in your television schedule
and on the taped packaging:
[_,
-,9
Quick
way to access
1
menu:
Simply
PresstheMenubutton
button
on the remote
captions
press the "Caption"
control:
Press the Cl-Iv button to
select" Function", then
Dress the VOL÷ BUtton,
2
PresstheCH v buttonm
select" Caoeon , then
oress the VOL + button
Misspellings
and unusual
characters
sometimes
occur during closed caption transmissions,
especially
those of live events.
There may be a small delay before
captions
appear when you change
channels.
These are not malfunctions of the Tg_
3
Press the VOL + or VOL =
DUttOR tO tuFn Close{] Cap _
[ionlng
on
or"off
In
appear
screen,
only a
ture.
4
D_ess the CHVbuttonto
select"Mode'.then
Dress
caption mode, captions
at the bottom of the
and they usually cover
small portion
of the pic-
the VOL + or VOL - button to
select_CaD[ion"
or"lext,"
In text mode, intbrmation
unrelated to the program,
such as
news or weather, is displayed.
"l}.xt often covers a lm_e portion
of the screen.
Diffbrent
Depending on the particular broadcast, it might be necessary to
make changes to _Channels" and" Field_ :
Use the CH.A., CI'IV i VOL+ and VOL - buttons to make the
changes (F0!law the sam e p[0cedura as in steps 374 above.)
Press the Menu button to exit.
Note: The Caption
feature doesn't
work
Component2
or Component3
mode.
49
(.,_,, ,, lot,i EPELMFIAItH]S
in Componentl
channels
and fields
display different information:
Field 2
carries additional
inf()rlnation
that
supplements
the information
in
Field 1. (For example,
Channel
1
may have subtitles in English,
while Channel
2 has subtitles
in
Spanish.)
(480p,
10800,
SPECIAL
FEATURES
Viewing
1
Picture-in-Picture
You can use the PIP feature to simultaneously
watch two video sources.
Note:
The PIP feature does not work with Component 1, Component2,
Components
When PIP is selected in the Zoom mode, the Mode is automatically
converted
into tile Normal mode.
Activating
mode.
Picture-in-Picture
Quick way to access the PIP
menu: Simply press the "PIP"
1
Press the Menu button
button
on the remote
control.
Pres_ the CI-I V button tc
select _ PIP_ men press
the VO/+ buttor
i
-'q
If you turn TV off while
watching
and turn
the PIP window
button to select [alp
PresstheVOL,orVOL_
'_
'Pro
it on again,
will disappear.
"o_,'
Press the Menubutton
to
exit,
I
Notes
•
•
•
•
•
PictuIe in Picture doesn't function when the Vchip is active.
%reen size cannot be changed in the PIP mode.
The PIP feature doesn't work with Component 1 or Component2,
3 signals.
When the cable box output is connected to ANTB, it cannot be viewed in the PIP window.
Double Window isn't available on models NCM5525WB/NCM4715W/HCM4215W/
HCM4216W/PCM5415R.
( }lAP
ii
[ ()t}}¢
_1'}
IA]
]'1%]U}¢IS
4.1 o
SPECIAL
FEATURES
Selecting
a Signal
]
Source
(Antenna
or Cable)
(External
A/V)
for
PIP
Press the Menu button
Press the CH N/button to
select" PIF, then press
the VOL+ button_
Press the CH V button to
select ?ANT/CATV,"
If an antenna is connected,
the setting is "ANF,"
If a Cable TV system is pro-
the appropriatetypeof
cablesystemis is displayed
("SFD; HRC,_
Or! IRC'),
Pressthe Menubuttonto exit,
Selecting
a Signal
Source
for PIP
z
Press the Menu button
"ii;Z!iiiiiZil ;;;;i_ _
PiP
_i
¸¸%¸¸
: On
Press the 6H v button to
select" PIP", thea press th e
VOL 4-button,
-ql Quick way to access the signal
source (PIP): Simply press the
"Source" button on the remote
control.
w
!!
iiii
iiiiiiiii_
I
ZZ
ZZZZZZZZZZZZZZZZZZZZZZZZZZZ
-<1
if you select "T_", the PIP hnage is
tile same as the main image
Pressthe CH V button to
select" SOURCE"; then
press the VOL÷ or VOLbutton to cycle through alt
of the available signal
sources:
zTV"
Press the Menu button to
exit,
4.1 1 (.,,1,1,1(){11
sl,];ci/kl
F}?Aiuiis
SPECIAL
FEATURES
Swapping
]
the
Contents
of the
PIP
Image
and
Main
<1
1
Image
Quick
way to access swapping:
Simply press the "Swap"
the l'emote control.
Press the Menu button,
button
on
Press the CH v button to
select _PIP", then Dress me
VOL+ button,
2
Press the CH v button to
select"Swap, men press
the rot + o[ VOL- button
Swa_
•
The image in me PiP winnow w_ appear on the
main screen, ann vice
versa
Press the Menu button to
exit
Note:
When ANTB is selected,
Changing
ili
the
I
ii
Size
_
i
the PiP
of the
SWAp
function
doesn't
work.
PIP Window
_1 Quick way to access PIP size:
Simply press the "Size" button on
the remote control.
ii
Press the Menu button,
_i_l_li!lll_il!lllll!i_llll_ili!llilllll_illllllllll_illl!llllll_l_l_lll_
_
Press the CH v button to
select 7PW, then press th E
VOL+ button,
_ililil!i_l_l_l_!_!_!_!_!_!_!_!_!_!_i!!_!il_l_i!_i_l_l;_lN_!_!l@_l_l_!_iiiiii
¸!i!i!i!i_ii_
ii!"_'_i!_
i
i
ii
i ZI_
_ i i
i i
i
_!_!j_{i_!_:_@_((((((_
i
i
i
i
i
<1 IlCM4715W/ItCM4215W/
HCM4216W/PCM5415R
:
LalNe, Small, Stock Ticker
HCM653WB/HCM553WB/HCM474W/
HCM5525WB/I ICM422W/PCM545R:
Press the CH v button to
select" Size," then
VOL + or VOL- button to
select the _Small"," Double
Screen", ?Large!, _Stock
licker" ; ° 4 Pictures" or
i
........................................
Double Screen, Laid,e, Small, Stock
Ticker, 4 Pictures, 13 Pictures.
13 Pictures".
Press the Menu button to
exit.
( Ii,%P
ii
_()UR
_P}
IA]
]'1%]URIS
4.1 2
SPECIAL
FEATURES
Changing
the
]
PIP Channel
Quick
1
Press the Menu button.
Press the OHV button to
VOL,hutten
setect?PlP*,thenpressthe
Z
Z
Press the CH v button to
select" Channel," then
press the VOL+ or VOL
button to change the
Z
channeI that appears in
the PIP window,
exit,
Note:
The PIP channels are not available when RE is set to ANTB.
(The PIP channels link to AN%A).
Changing
the
Location
(Rotating)
in PiP
mode
When you press the Locatebutton repeatedly, the PIP window
moves from corner to corner on the TV screen.
Scanning
the
Available
Channels
Thisprocedurescansall of the avaHabtechannelsa_dthenstores
Press the Scan button, and the memorized channels wi!l appear in
sequence for 2 to 3 seconds per channel,
Press the Scan button again to stop the scanning process
When Scan stops, the viewing mode will return to its original set_
ring.
4.1 3 ( .,,,,,, l(),ll slq(;IAIr}Alt)l]s
way to access
Simply press the (PIP)
on the remote control.
PIP C] [:
"CI [" button
SPECIAL
FEATURES
Using
]
the V-Chip
The VChip
feature
automatically
locks out programming
that
children.
The user must fh-st enter a PIN (personal
ID number)
restrictions
can be set up or changed.
is deemed
inappropriate
for
before any of the V Chip
Note : When the Vchip
function.
auto program
Setting
Up
Your
feature
Personal
is active, the PIP and channel
ID Number
features do not
(PIN)
-_
1
Quick
menu:
button
Press the MENU,
way to access
the V-Chip
Simply press the V.Chip
on the remote control.
Press the CH v button [o
select the" Function, men
cress the VOI. + button,
2
Press the CH v button to
select the "V-chip, men
press theVOL + button
The" Enter Pin" screen wilt
appear. Enterjour
PIN numner
4-dlgd
Note: The default PIN number for a new TV set is "0-0-0-0."
3
After enterincoa valid PtN
numBer
the
WChlD"
Screen
w appear
Press the CH v button and
select" Change pin,", then
press the VOL + button
Change
P_n
•
-_1 Note:
if you furget
4
press the remote-control
Whi e the _Change pm
field is selectee oress the
VOL + button
following
sequence,
pin to 0-()_0_0:
The Change D_nscreen w
anoear. Choose any
Zf-digitsfor your PIN and
enter
trlem,
POWER
_/
Qot#_m New _n
CenfcmNe_r_:
4 +
|
•
•
OFF
POWER
the PIN,
keys
which
"_ MUTE
in the
resets
+
the
8 "_ 2
ON.
•
As soon as the 4 digits are enterea the" Confirm new pin screer
aDoears, Re-enter the same 4 digits, When the Confirm screen
u_sappears,your PiN has been memorized
Press the MeBUbutton to exit.
( }lAP
11
[ ot]}¢
S}'_
IA]
]']
%]t]}¢lS
4.1 4
SPECIAL
How
FEATURES
to Enable/Disable
]
the
V-Chip
1
Press the Menu button.
Press the CH v button to
select * Function . then Dress
the',dO[ + butto_
ii
V Chip
2
Press the CH V button [o
select" V-Chip. [hen
Dress LheVOL+ button
The Enter Pin" screen will
aeeear. Enteryour4-digit
PIN numneE
To enable the V_Chipfeature
press the VOL+ button so
v c_,_p
Lock
: Yes
that the _V-Chip lock" field is
Yes. (Pressing the VOL+ button will aIternate between
Yes and NO.)
How
to
Set
up Restrictions
Using
the
"TV
guidelines"
First, set up a personal identification
number (PIN), and enable the V Chip. (See previous
section.)
Parental restrictions can be set up using either of two methods: The TV guidelines
or the MPAA rating.
1
Press the Menu button.
Press the CH v
button
to select" Function,"
then press the VOL +
button.
4.1 5 ( .,,,,,,
i1 SP](;IAI
FIfAIUI]S
SPECIAL
FEATURES
I
2
Press the CH V button to
select the "V_Chip , men
Dressme VOl + DUZton
The" Enter Pin" screer
witI appear. Enter your
4-digit PIN number.
3
Press the CH V button to
seiect the "TV Guidelines"
then Dress the VOL + button.
VqD_ _LeCk
: NO
TV Gu_dellnes
_LIm
_8_t
OIE_
Note: These
4
TWO separate
The "TV Guidehnes screen
cate_ _ries consist
groups:
ot
TV_Y and TV_Y7
tyoung children througn age 71. lnd
TV_G through TV_MA (evervbodv
else).
will appear
Press the CH A, CH V
buttons to select one of the
six age-based categories:
The
restrictions
work
TV_Y
TV_Y7
Young childrer
Children 7 ariaovPr
TV_G
TV_PG
TVq4
TV-MA
General audience
Parent Guidance
viewers 14and over
Mature audience
tor these
independently:
includes
very young
as young
adults,
must
children
_ee next
as well
the TV _uidelines
De set up separatel_
grou F
two groups
If a household
tor each
age
step,
At this ooint one of the TV-Ratings is selected t Dlue co{orJ
Press the VOL ÷button: Depending on your existing setup, a letter ° U° or" B" nit star[ blinking,
flJ= gnbiocked. B- Blockedl
While me" U° or" B" is red, press me BH A
or CH v button to blOCKor unDIocKme category.
Press the VOL + button once to save the TV guidelines. A TV_Ratingwill be selected (BLUE) and no letters wilt
blink. To exit this screer _ress the Menu button again. [o select a different TV-Rating, press the CN A or CB v
button and then repeat me u-ocess
Note 1: The TV-YT.TV-PG TVq4 and TV-MA have add ttonat options. See me next step [o ;nange
an) of the following sue*raung_,
FV:Fantasy v_o_ence
D: Dialoc
L: Adult language
S: Sexual situation
V: Violence
Note 2: The V-Chip wm au[omatica j block certain categories that are _more restrictive." For example, if you
block "TV-Y" category, then TV*Y7will automatically be blocked. Similarly, if you block the TV_Gcategory
then atI the categories in the "young adult" group will be blocked (TV-G.TV-PG.TV-14 and TV*MA).
The sub-ratings tD. L S. Vt work together similarly. See next section.'
( }lAP
ii
[ ()t}}¢
_}'}
IA]
]']
'_]t}}¢IS
4.1 6
_PECIAL
FEATURES
]
6
How to set the B, D. L S and V sub-ratings:
First select one of these TV_Ratings TV47 IV-PG TV44 or TV-MA (See Step 4, en preweus paget
Nexl Nhite the IV-Rating is saec[ea _BLUE).repea[eamypress the VOL+ button. This wiI] cycle through the ava
able sub-ratings IFVL S. D or \
A blinking letter (_U" er" B" } wiii be displayed for each sub-rating, Vvntte[ne" U" or" B" is blinking, Dress [ne
CHA or CHv button to change the suo*raung,
Press the VOL+ BUttOnonce to save the TV guiddines. A TV-Rat lg will be selectee ,BLUEI. and lo Ietters wm
blink, To exit this screer aress the VOL+ button again. To select a different [V-Rating, Dressthe CN/x or CN v
button ar ] men reoea[ [ne process
Note: The V-chip wilI automaticaIly DIOCKcertain categories that are" More restrictive". For exampie, if you o_oc.
L suu-raung in TV?G. then the" L' sub-rahngs in TV-14 and ] -MA will autematicatty be blocked.
7
Press the Menu button three times to clear all the screens, [Or proceed to the next section ana set up additional
restrictions based on the MPAA codesL
How to Set up
R, NC-17,
X
Restrictions
using
the
MPAA
Ratings:
G, PG,
PG-13,
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,
and its main application is i_)r movies. (Eventually, movie videocassettes will be encoded with
MPAA ratings.) When the _Chip lock is on, the TV will automatically block any programs that
are coded with o_ectionable
ratings (either MPAA or T_Ratings).
Press the Menu b#tten,
Press the CH v butten to
select the" Function", then
pressthe VOL + butten,
4.1 7 ( .,,,,,,
Ii SP]CIAI
r}Alt]l]S
v c_,_p
_.
SPECIAL
FEATURES
I
Press the CH v button 1,o
select the "V-chip", then
press the VDL + button.
i_i_i_i_i_i_!_i!_i;_ii_!!_lililililililiiiii%i!ii!ii!ii!ii!ii!ii!l!_%lilililililili_
ililililililililililiiii'_i_,:_iiii_ii%ii_ii_iii_iii%_i_i_i_i_i_i
_
The" Enter Pin" screen wi_
appear, Enter your 4-d!git
PIN number
The" V-Chip" screen will
appear,
Press the CH V button to
select" M PAA rating", then
press the VOL + but!0n.
J
Genera] aud!ence {no restric!ions)_
PG
The _MPAA rating" screen
will appear,
Repeatedly press the CHv
button to select a particular
IPG-13 PGq 3 !Parents strongly cautioned)
R
R (Restricted, Children under 17 should
.
be accompan!ed byan adu!t)
.
.NC-17 No eh!ldren under age ] 7
MPAA category.
categories:
,X
X !Adu!ts onty!:
NR
.
Notrated,
.
While a particular category is highlighted, move thejoystick to the right to activate it,
A blinking letter (" U" or" B") will be displayed. Press the OHA or OHv button to select" U" or" B'%
Press the VOI. + button to save the settings.
Note: The V Chip will automatically block any category that is" more restrictive," For example, if you block the" PG
13" category, then" R," "NC t7," and" X" will automatically be blocked also.
How
Blocks
to
Reset
.
Paren!a!guidance su#ges!ed:
the
a Channel
TV after
the
("Emergency
V-Chip
Escape")
tf the TV is tuned to a restnc[ea cnanne_ me J-Ch 3 wm o_ock it. The screen witl go blank and the following
message wilt appear:" Excessive ratine
To resume normal viewing tune to a different channel using the number buttons. Under certain condihons
[dependln£ on the rating of the focaI TV programat the V-Chip might Iock out a the channels. In this case. use
[he WCh g function for an ° emergency escape :
Press the Menu button [o etspia) the menu. Press [r _ CH V button In select the" FuncTion menu ana [}res_
[he VOL+ button,
Press the CH V button to select the" V-Chef} menu ann press the VOL + button. Enter your PIN number, ann
oress the VOL + button to [emporamy Jisable the V_ChiE}LOCK
Press the V-Chiu button on the remote control, Enter your PIN number ann move [nejoysbck to the rlgn[ 1o
[emporany disable the V-Chip LOCK,
( }IAPTII
[(
t]}#
_P}
IA]
]']
%]t]}#IS
4.1 8
I
SPECIAL
FEATURES
Viewing
the
I
Demonstration
Tu become
familiar with the various
the built-in
demonstration.
menus
provided
by your television,
you
Press the Menu batten.
Picture icon witI be
highlighted (b_inking),
2
Press the CHV button to
select _Demonstration",
then press the VOL+ button,
iiiiiil;_i_[[[[[[[[[[[[[[[_
z z
i
i
_aaaaa[[i:_i
¸
i
i
3
Each of the menu opt ons
_smsp_ayedIn turn.
Whet you wren [o stop
the demonstration press
i
any OUttOnon me remote
control
Note:
[he Component3 ack is
available on PCM545R/
HCM422W/HCM474W
HCM553WB/HCM653WB,
Press me Menu button to
exit
4.1 9 ( .,,,.,
i1 SP](:IAI[}AIt)I]S
I;
i
/
SPECIAL
FEATURES
Customizing
]
Your
Remote
Control
Yuur TV comes equipped with a "universaI" remote control. In addition to
controlling the TV, the universal remote can also operate most VCRs, DVDs and cable
boxes (even if your VCR, cable box or DVD are made by manufacturers
other than
Samsung).
Setting
Up
Your
Remote
Control
to Operate
Your
VCR
(or DVD)
2
_ The remote control
"modes":
"T_/;" "VCR",
Press the MODE button and make sure that the VCR(or DVD) LED
is illuminated,
and "DVD."
Press the "MODE"
button to switch the remote control
to the "VCR"
has four
"Cable"
(or DVD) mode.
Onyour Samsung remote control, press Set.
Make sure you enter 3 digits of
the code, even if the first digit is a
Enter 3 digits of the VCR(or DVO)qod_ !isted on page 4.22for
your brand of VCR (or DVD).
"0."
If more than one code iisted,
first
Press the Power button on the remote control, YourVCR
(or DVD)should turn on. If your VCR{or DVD)turns on, your
remote control is now set correctly,
try the
one.
_41
If youron, VCR
DVD)2, does
not turn
repeat(orsteps
3, and
4, but try one of the other codes
listed for the brand of your particular VCR (or DVD).
If no other codes are listed, try
each code, 000 through 089.
_1 When your remote control
in the "VCR" (or DVD) mode,
Once your remote control is set up, press the MODE button
any time you want to use the remote to operate your VCR(or
DVD).
volume buttons
TV's volume.
still control
is
the
your
When your remote is in the "TV"
mode, the VCR control buttons
(PLAY, PAUSE, etc.) will still operate your VCR.
(}lAP
ii
F()t}}¢
_}'}
IA]
]']
%]t}}¢lS
42O
SPECIAL
FEATURES
Setting
Up
Your
]
Remote
Control
to Operate
Your
Cable
Box
]urn offyour cabie
box,
-,11 The remote control has four
"modes":
"TK" "VCR," "CABLE"
Press the MODE button and make sure that the Cab!e
LEDis ilIuminated.
and "DVD."
Press tile "MODE" button to switch
the remote
mode.
control
to the "Cable"
3
OnyoutSamsungremotecgntr0!,press SET.
4
_the code,
Make
sureyouenter3digitsof
even if the first digit is a
Enter 3 digit s of the cable box code listed below for your brand of
"0." (if more than one code listed,
cable box.
try the first one.)
-,11 if your
on, repeat
Press Power. Your cable box should turn on. Ifyour cane box turns
cable box does
steps
one of the other
codes
particular
of cable
other
codes
box code,
brand
not turn
2, 3, and 4, but try
are listed,
t)t)t) through
listed
for your
box. (if no
try each cable
1)77.)
6
" When
your,emote
control
is
Once your remote contmI is set up, press the NODE button any time
you want to use the remote to operate your cab!e box:
buttons still control your TV's vob
ume. Also, the VCR control buttons
in the "CABLE"
n,ode,
the volmne
(PLAY, PAUSE, etc.) will still operate
your
4.21
(.,,1'1,
l()_ll
SI'ICIAI
FIAIUIiS
VCR.
SPECIAL
VCR
Codes
Cable
Box
Codes
DVD
Codes
FEATURES
]
R1.H
O73
Admiml
006, 079
Aiwa
015
LG
009, 014, 046, 060
Akai
017,022, 023, 027, 030
Lloyd
015
Audio Dynamics
014,016
Logik
031
Bell & How_l
002
LXI
015
Broksor_
010
Magnavox
008, 029, 053, 056
Candle 007,009,013,
045,046,052 Marantz
002, 008, 014,016,
Cannon
008, 053
029, 030, 046, 061
Marta
009
Citizen
007, 009,013, 045, 046, 052
008
Colortyme
014 MEI
Memorex
008, 009, 012, 015
Craig
007,012
027
CuRm-Mathes
000,007,008, 014, MGA
Midland
032
015,046, 053, 064, 067
Daewoo
013, 045, 076
Mi_ota
005, 035
DBX
014_016
IVfitsubishi
005, 027, 035, 040
Dimensia
000 Montgomery
ward
006
MTC
007, 015
Dynatech
015
E1ectrohora_
027
Multitech
007, 015, 031,032
Emerson 008,009,010,013,015,010,023,027,NEC
002, 014, 016, 030, 046,061,064
034,041,042,
047,04g,057,
062,065,
067,0_, 070 Optimus
006
Fisher 002,012,018,019, 043, 048, 058
Parmsordc
008, 053, 075, 077
Funai
015
Pentax
005, 035
GE
000,007, 008, 032, 053
Pentex Reserch+
046
Go video
007
Philco
008, 029, 053, 056
Harman Kardon
014
Philips
008, 029
Hitachi
005, 015, 035, 036
Ftoneer
005, 016, 033, 050
Instant Replay
008
]C Permey
002,005, 007,008, 014,
016,030,
035, 051, 053
JCL
008, 002,014, 016, 030, 046
JVC
002, 014,088,089
Keawood
002,014, 016, 030, 046
Portland
ProScan
Anvision
007,008
Cablestar
007,008
Eagle
007,008
Eastern Int.
002
General lnstrument
046
GI
004,005,015,023,024,
025,030,036,067,068,069
HamYm
003,012,013,034,048
Hitachi
037,043,046
Jerroid
004,005,015,023,024,
025, 030, 036, 046, 062, 065
Macom
037, 043
Magnavox
007, 008, 019, 021,
026,028,029,032,033,040,041
NSC
Oak
OskSigma
Panasordc
[ Philips
Proscan
RCA
Toshiba
P_msonic
001
002
002
003
004
Sony
Saraslmg
008
000
044, 045, 052
000
Quartz
002
Quasar
008, 053
Radio Shack/Realistic
002, 006,008,
009,012, 015, 019, 027, 045, 053
009
016,038
016
003,027,039,061,
073,074
Philips
007, 008, 019, 021,026,
028, 029, 032, 033, 040, 041
Pioneer
018, 020, 044, 074, 077
Randtek
007, 008
RCA
000,027,066
Regal
003,012,013
Regency
002,033
SA
070,071,072
Semsang
044,003,022,063,064
RCA
000, 005, 007,008, 028,
035, 037, 054, 069
Samsung
007, 013, 022,032,042,077
Ser_ui
016
_yo
002, 012
SeoR
013, 041,049, 0fib
Sears
002, 005, 009,012, 018,
019, 035,043, 048
Sharp
006, 027, 039, 045
Shintom
017, 026, 031,055
Signature
015
Sony
017, 026, 038
Sylvama
008, 015, 029, 053, 056
Symphon_
015
Taridy
002_015
Tashiko
009
Tatting
030
Teae
015,030, 069
Te_
008
Termka
008, 009, 015, 021
TMK
067
Toshiba
005, 013, 019, 048, 049
Totevision
007,
Uni_ch
007
Vector Research
014, 016
Victor
016
video Concepts
014, 016
Videosc_ic
007
Wards
005, 006, 007,008, 009,
012, 013, 015, 027, 031,035
Yamaha
002, 014, 016, 030, 046
Zenith
011,017, 026, 079
Signature
Sprucer
Starcom
046
027
046
Stargate2000
058
Sylvania
011,059
Texscan
011,059
Tocom
017,021,049,050,055,073
Unika
031,032,041
Universal
051,052
_rlewster
007, 008, 019, 021,026,
028, 029, 032, 033, 040, 041
Warner Amex
044
Zenith
014,042,057,061,
075,076
Note: Tile lvmote control might not be compatible
with aii DVD
Players, VCRs, arid Cable boxes.
(;HAP
i< r 01]}¢ SP
CIA]
] ]A]/U¢
S
4.22
TROUBLES}lOOTING
If the TV seems to have a problem, first try this list of possible pzoblems and solutions. If
none of these troubleshooting tips apply, then call youz nearest sezvice center.
Identifying
Problems
Problem
Possible
Poor picture.
Try another channel.
Adjust the antenna.
Check all wize connections.
Poor sound
quality
Solution
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Pzess the TV/Video button.
Make sure the TV is plugged in.
Check the antenna connections.
No coloz, wrong colozs oi tints.
Make sure the pzogzam is bzoadcast
Adjustthepicture settings.
Picture
Adjust the antenna.
Check all wize connections.
roils veztically.
The TV operates
erratically
Youz remote control
opezate youz TVI
does not
The TV won't tuzn on.
Unplug the TV for 30 seconds,
opezating it again.
in color.
then tzy
Pzess the "MODE" button to put your remote
control in the "TV" mode.
Make sure the wall outlet is wozking.
Note
Wide TV(16:9):
Normal
5.1
( HAl']
I i VE ]R<[IB]
_$1R)OI/NG
If you watch a still image or the screen in the Normal(4:3)
aspect
ratio format for a long time, images may be burned onto the
screen.
TV(4:3): If
you watch a still image or the screen in the Wide(16:9)
aspect
ratio format for a long time, images may be burned onto the
screen.
APPENDIX
Cleaning
and
Maintaining
Your
TV
With proper care, your TV unit will give you many years of"service. Please follo_ V these
guidelines to get the maximum performance
from your T_/_
Placement
Do not place the TV near extremely hot, cold, humid oi- dusty places.
Do not place the TV near appliances with electric motors that create magnetic fields,
such asvacuum c]eaners.
Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
Place the TV in a vertical position only.
Liquids
Do not handle
damage.
liquids
near or on the TV Liquids
that spill into it can cause serious
Cabinet
Never open the cabinet or touch the parts inside.
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
Do not put heavy objects
on top of the cabinet
Temperature
If your TV is suddenly moved from a cold to a warn] place, unplug the power cord,
and allow at least two hours for moisture that may have fornqed inside the unit to dry
completel_
Using
Your
TV
in Another
Country
If you plan to take your TV with you to a foreign country, please be aware of the diflbrent
television systems that are in use around the worM. A TV designed for one system may
not work properly with another system due to diff'erences in the TV channel frequencies
Specifications
Model
Dimensions
HCM653WB/ HCM553WB/ HCM474W/ HCM422W/ HCM5525WB/
HEM4715W/ HEM4215W/ HCM42I6W/ PCM545R/ PCM5415R
AC 120V
60Ez
240 Watts
HCM653WB
: i529.0x7360x 15870mm; 602x 290x 625 inches
HCvI553WB
/ HCM6525WB
: i312 x 681x 1438mm: 817 x 256 x 865 Jnchrs
HCM474W: 1132x 588x 1328mm: 446x23 1x 522ir_ch6
HCM422W/ ECM42i5W/ HCM4216W: 1002x 450x 1070mm;39.4x i77 x 42 i inches
}1C\44715W
: ii32 x 583x 12i7 mm: 446 x 230x 479 inch6
PCM545R/ PCM5415R: 1161x 605 x 1400 mm; 457 x 238 x 55I inches
HCMO53WB
: 136K8; 2998 lbs.HCM583WB/ HCM5525WB:995 Kg; 2194 lbs
HCM474W:76 K8; 1675 lbs,HCM422W/ HCM4215W/ HCM4216W:49 Kg ;1080 lbs
ECM4715W:62 Kg ;1367 Ibm,HCM545R:70 Kg ;1543 Ib_,HCM5415R: 70 Kg; I565 Ibs
APPEN]>IX
A.
BP6@,O(,_21A(ENG)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising