4099V, 4099V Clip Microphone for Violin, Mandolin, and more

4099V, 4099V Clip Microphone for Violin, Mandolin, and more
4099V, 4099V Clip Microphone for Violin, Mandolin, and more
4099V, 4099V Clip Microphone for Violin, Mandolin, and more
Violin, banjo and viola players will appreciate how gently the 4099V
adheres to a prized instrument while its elegantly lightweight,
unobtrusive design keeps it from getting in the way of a passionate
performance.
Sting
■
Superior gain-before-feedback
■
Wireless compatible
■
Flexible and easy one-hand mounting
■
Holder gentle to the instrument
■
Available from May: detachable cable and versatile gooseneck
extender
Violin, banjo and viola players will appreciate how gently the 4099V
adheres to a prized instrument while its elegantly lightweight,
unobtrusive design keeps it from getting in the way of a passionate
performance.
The 4099V is a unique clip microphone inheriting the sonic approach
from the legendary DPA studio microphones to a new instrument
microphone. The 4099 microphone and mounting system is meticulously
designed and optimized for the string family. This is to ensure the best
possible mount and audio reinforcement is achieved when performing
live. The 4099V fits other instruments with a body depth between 35 mm
(1.4 in) and 55 mm (2.1 in).
Representing years of research and development, the 4099 condenser
microphones feature supercardioid polar patterns for superior
gain-before-feedback. Fully capable of handling the violin’s dynamic
range and subtle details, these microphones live up to their pedigree
with sound as accurate as DPA’s other world-class microphones.
Through the use of our extensive adapter system, the 4099 is
compatible with virtually any wireless system and can also be used as a
standard 48V phantom powered microphone via the included XLR
connector.
Fleet owners of 4099s will appreciate the multiplicity of using the
microphone for a number of different instruments simply by moving the
microphone/gooseneck part to another instrument clip from the range.
With its very flexible design for a wide variety of mounting and
positioning possibilities along with its extremely natural sound, the 4099
is truly a musician’s mic without equal. Continuing DPA’s heritage of
sonic excellence, this series of microphones achieves the purest
reproduction of your instrument and therefore your full range of
expression.
Optional
gooseneck
extension
Standard gooseneck length is 140 mm (5.5 in), which can be altered
with the optional gooseneck extension unit, adding another 50% to the
length, helping to achieve exactly the sweet spot for the instrument.
Detachable
cables
From May 2012, the updated 4099 range features detachable cable from
gooseneck, so it’s more convenient to mount the mic on an instrument
before connecting it. Furthermore, the choice of different cable qualities
makes it possible to tailor your mic to the specific task, such as choosing
the heavy duty 2.2 mm cable for PA/Live gigs or the easier-to-hide,
thinner miniature cable for personal mounting on instruments where you
don’t want the cable weight to interfere with your performance. In case
of cable break, service is easy and fast.
Adapters
for
wireless
microphones
A wide range of connection adapters makes it possible to use DPA
miniature microphones with all professional UHF, VHF or digital wireless
system available plus 48 V Phantom.
Despite its tiny, discreet size and elegant, lightweight design, 4099V is
extremely rugged. The versatile gooseneck provides stable and
repeatable positioning. The mics can be easily unclipped and
repositioned or moved to another instrument with only one hand, while
the mounting system is designed never to mar or scratch the finish of
your instrument.
Page 1 of 4
DPA has specific adapters for AKG, Audio Ltd., Audio-Technica,
Beyerdynamic, Electro-Voice, Lectrosonics, Micron, Mipro, Pastega,
Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony, Toa, Vega
and other systems. Each adapter for your cordless microphone is
guaranteed to perfectly mate to your system of choice.
For more information please visit:
www.dpamicrophones.com
Page 2 of 4
4099V, 4099V Clip Microphone for Violin, Mandolin, and more
Directional characteristics:
Supercardioid
Max. SPL, peak before clipping:
142 dB
Microphone length:
45 mm (1.8 in)
Principle of operation:
Pressure gradient
Output impedance:
From MicroDot: 30 to 40 ohm, from DAD4099:
100 ohm
Cable length:
1.8 m (6 ft)
Cartridge type:
Pre-polarized condenser
Frequency range:
20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in)
distance:
80 Hz to 15 kHz with 2 dB soft boost at 10 to
12 kHz, Second order low-cut filter at 80 Hz
with DAD4099
Sensitivity, nominal, ±3 dB:
6 mV/Pa; -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted:
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
71 dB
Total harmonic distortion (THD):
<1 % up to 123 dB SPL peak; <1 % up to 120
dB SPL RMS sine
Dynamic range:
100 dB
Cable drive capability:
300 m (984 ft) with DAD4099
Output balance principle:
Signal balanced with DAD4099 XLR adapter
Common Mode Rejection Ratio (CMRR):
> 60 dB at 50 Hz to 15 kHz with DAD4099
XLR adapter
Power supply:
Min. 5 V to max. 50 V through DPA adapter for
wireless systems; 48 V phantom power ±4 V
with DAD4099 XLR adapter
Current consumption:
1.5 mA; 3.5 mA with DAD4099 XLR adapter
Polarity:
Positively increasing sound pressure produces
positive going voltage at MicroDot pin (and pin
2 on DAD4099 XLR adapter)
Operating temperature range:
-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity:
Up to 90 %
Gooseneck, length:
140 mm (5.5 in)
Holder:
Fits other instruments with a body depth
between 35 mm (1.4 in) and 55 mm (2.1 in)
Connector:
MicroDot
Color:
Black
Weight:
33 g (1.16 oz)
Diagrams
4099V, 4099V Clip Microphone for Violin, Mandolin, and more
The proximity effect exhibited by DPA 4099
Typical on- and off-axis frequency response of DPA 4099 at 20 cm
(7.9 in) distance
The proximity effect exhibited by DPA 4099
Typical on- and off-axis frequency response of DPA 4099 at 20 cm (7.9 in) distance
Page 3 of 4
Typical on- and off-axis frequency response of DPA 4099 with
DAD4099 XLR adapter at 20 cm (7.9 in) distance
Directional characteristics of DPA 4099 (normalized)
Typical on- and off-axis frequency response of DPA 4099 with DAD4099 XLR adapter at 20
cm (7.9 in) distance
Directional characteristics of DPA 4099 (normalized)
Changes in specifications if you supply less than 48V Phantom
power
Headquarters:
DPA Microphones A/S
Gydevang 42- 44
DK-3450 Alleroed, Denmark
Tel: +45 4814 2828
Fax: +45 4814 2700
info@dpamicrophones.com
www.dpamicrophones.com
United States:
DPA Microphones, Inc.
2432 N. Main St., Suite 200
Longmont, CO 80501, USA
Tel: +1 303- 485-1025
Fax: +1 303- 485-6470
info-usa@dpamicrophones.com
www.dpamicrophones.com
© , DPA Microphones A/S
Product features and specifications are subject to change without notice.
Page 4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising