Data Sheet Part Number 856717 1960 MHz SAW Delay Line

Data Sheet Part Number 856717 1960 MHz SAW Delay Line
Part Number 856717
1960 MHz SAW Delay Line
Data Sheet
Features
•
•
•
•
•
•
•
For BTS Power Amplifier applications
Usable bandwidth of 100 MHz
Absolute delay of 450ns
Low group delay variation
Ceramic Surface Mount Package (SMP)
Hermetic
RoHS compliant (2002/95/EC), Pb-free Pb
Package
Pin Configuration
Surface Mount 7.01 x 5.51 x 1.63 mm
SMP-28B
Bottom View
1
0.76
1.63 NOM.
1.78 MAX.
2
3
12
4
11
5
10
6
7.01
1.27
9
1.70
7
Single-ended Configuration
Pin No.
Description
10
Input
4
Output
1,2,5,7,8,11 Case Ground
3,6,9,12
Ground
1.27
5.51
0.79
8
1.14
Dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall
length and width ±0.13mm
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0µm,
over a 2 – 6µm Ni plating
Subject to change or obsolescence without notice
Rev A
02/08
© TriQuint Semiconductor
Page 1 of 5
Part Number 856717
1960 MHz SAW Delay Line
Data Sheet
Electrical Specifications (1)
Operating Temperature Range: (2)
-35 to +85 °C
Parameter (3)
Minimum
Typical (4)
Maximum
Unit
-
1960
-
MHz
1990
22
23
1884
2013
26
27
1930
-
dB
dB
MHz
MHz
-
0.4
0.5
0.8
1.2
dB p-p
dB p-p
445
3
4
450
7.0
8.0
455
degree
degree
ns
-
24
40
ns p-p
-
3.4
5.0:1
-
-
2.1
50
50
5.0:1
-
Ω
Ω
Center Frequency
Minimum Insertion Loss
+25 °C
-35 to +85 °C
Lower 1.2 dB Bandedge (5)
Upper 1.2 dB Bandedge (5)
Amplitude Variation
1950 – 1970 MHz
1930 – 1990 MHz
Phase Linearity
1950 – 1970 MHz
1930 – 1990 MHz
Absolute Group Delay
Group Delay Variation
1930 – 1990 MHz
Input VSWR
1950 – 1970 MHz
Output VSWR
1950 – 1970 MHz
Source Impedance (single-ended) (6)
Load Impedance (single-ended) (6)
Notes:
1. All specifications are based on the TriQuint test circuit shown below
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to minimum insertion loss
6. This is the optimum impedance in order to achieve the performance shown
Test Circuit:
Actual matching values may vary due to PCB layout and parasitics
3.6nH
4.3nH
10
50 Ω
Single-ended
Input
50Ω
Ω
Subject to change or obsolescence without notice
4
0.5pF
1.5pF
1,2,3,5,6,7
8,9,11,12
Rev A
02/08
50Ω
Ω
© TriQuint Semiconductor
50 Ω
Single-ended
Output
Page 2 of 5
Part Number 856717
1960 MHz SAW Delay Line
Data Sheet
Typical Performance (at room temperature)
Subject to change or obsolescence without notice
Rev A
02/08
© TriQuint Semiconductor
Page 3 of 5
Part Number 856717
1960 MHz SAW Delay Line
Data Sheet
Matching Schematics
Actual matching values may vary due to PCB layout and parasitics
3.6nH
4.3nH
10
50 Ω
Single-ended
Input
4
50Ω
Ω
1,2,3,5,6,7
8,9,11,12
Marking
PCB Footprint
1.34
TriQuint
856717
XXXXXX
ID dot
50 Ω
Single-ended
Output
50Ω
Ω
0.5pF
1.5pF
.28
.99
1.34
.28
Date code
5.71
.99
7.21
The date code consists of: day of the current year (Julian,
3 digits), last digit of the year (1 digit) and hour (2 digits)
This footprint represents a recommendation only
Dimensions shown are nominal in millimeters
Tape and Reel
16.8
2.7
ID dot
Ø330
4.0
0.3
2.0
Ø1.5
A
1.75
7.5
16.0
7.3
Ø102
Direction of travel
Ø20.2
Ø13.0
2.0
2.2
5.8
8.0
Ø1.5
A
Section A-A
Dimensions shown are nominal in millimeters
Packaging quantity: 3000 units/reel
Subject to change or obsolescence without notice
Rev A
02/08
© TriQuint Semiconductor
Page 4 of 5
Part Number 856717
1960 MHz SAW Delay Line
Data Sheet
Maximum Ratings
Parameter
Operating Temperature Range
Storage Temperature Range
Symbol
Minimum
Maximum
T
Tstg
-35
-40
+85
+85
Unit
o
C
C
o
Important Notes
Warnings
•
•
Electrostatic Sensitive Device (ESD)
Avoid ultrasonic exposure
RoHS Compliance
•
This product complies with EU directive 2002/95/EC (RoHS)
Pb
Solderability
•
Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile)
Links to Additional Technical Information
PCB Layout Tips
Qualification Flowchart
S-Parameters
Soldering Profile
RoHS Information
Other Technical Information
TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability
for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet.
Contact Information
PO Box 609501
Orlando, FL 32860-9501
USA
Subject to change or obsolescence without notice
Phone: +1 (407) 886-8860
Fax: +1 (407) 886-7061
Email: info-product@tqs.com
Web: www.triquint.com
Rev A
02/08
Or contact one of our worldwide
Network of sales offices,
Representatives or distributors
© TriQuint Semiconductor
Page 5 of 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising