PDS-60ca 7.5 V Pre-programmed

PDS-60ca 7.5 V Pre-programmed
Date: ______________________________ Type: __________________________
Firm Name: _______________________________________________________
Project: __________________________________________________________
PDS-60ca 7.5 V Pre-programmed
Power / data supply for indoor and outdoor applications
PDS-60ca 7.5 V Pre-programmed is a versatile
power / data supply designed for indoor
and outdoor LED lighting fixtures employing
Chromasic® technology from Philips Color Kinetics.
PDS-60ca 7.5 V Pre-programmed features builtin visual effects, allowing configurations without
Ethernet or DMX controllers.
D For device mounting and maintenance
details, refer to the Installation Instructions
included in the product packaging, or
download documentation from www.
colorkinetics.com/ls/pds/pds60ca7/
In runs with multiple power / data supplies,
PDS-60ca 7.5 V Pre-programmed functions as a
master control unit, delivering data to the other
power / data supplies in the run. Therefore, use
one PDS-60ca 7.5 V Pre-programmed unit per
run, and standard PDS-60ca 7.5 V DMX / Ethernet
units for all additional power / data supplies.
PDS-60ca 7.5 V Pre-programmed delivers 62 watts
of power output and automatically accommodates
input voltages ranging from 100 VAC to 240 VAC.
Short-circuit protection prevents device failure
due to incorrectly wired fixtures.
Featuring a NEMA 4 (IP66) enclosure, PDS-60ca
7.5 V Pre-programmed installs in dry, damp, and
wet locations.
PDS-60ca 7.5 V Pre-programmed offers multiple
standard-size conduit entries to accommodate
1/2 in (13 mm) and 3/4 in (19 mm) trade-sized
conduit.
Compatible Fixtures
Fixture
Max. Quantity Per
PDS-60ca 7.5 V
iColor Flex MX
2 strings
iColor Tile MX
1
iColor Flex MX
PDS-60ca 7.5 V
Pre-programmed
(master unit)
D PDS-60ca Pre-programmed wiring
diagrams are available online at
www.colorkinetics.com/support/wiring/
PDS-60ca 7.5 V
DMX / Ethernet
(all other units)
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
Item
Electrical
Input Voltage
100 – 240 VAC, auto-switching, 50 / 60 Hz
Maximum Input Current
1.7 A at 100 VAC, 1.5 A at 120 VAC, .75 A at 240 VAC
Power Output
7.5 VDC, 62 W maximum
Fuse Rating
(2) 5 A, 5 x 20 fast blow fuses
Dimensions
(Height x Width x Depth)
3.6 x 5.5 x 8.8 in (91 x 140 x 224 mm)
5.5 in
(140 mm)
Construction
Finish
Gray matte
Data
RJ45 output connector
Power Output
(2) 4-pin output receptacles
Power Input
Line-neutral-ground cable, flying leads
Temperature Ranges
14° – 104° F (-10° – 40° C) Operating
14° – 122° F (-10° – 50° C) Startup
-40° – 176° F (-40° – 80° C) Storage
Humidity
0 – 95%, non-condensing
Cooling
Convection
Heat Dissipation
25% of total power input at maximum load
Data Input Source
Internal
Certification
UL / cUL, CE, PSE
Classification
UL Class 2 power supply
Environment
Dry / Damp / Wet Location, IP66
OUT 2
4.5 lb (2.0 kg)
Cast aluminum enclosure with slots for
surface mounting
OUT 1
Weight
Connectors
8.8 in
(224 mm)
DMX
OUT
Certification
and Safety
Details
DMX/ETHERNET
IN
Physical
Specification
Sized for 1/2 in (13 mm)
trade-size conduit
3.6 in
(91 mm)
Sized for 3/4 in (19 mm)
trade size conduit
Overall Dimensions
8.3 in
(211 mm)
8.3 in
(211 mm)
Mounting
Slots
1 in
(25 mm)
2 in
(51 mm)
Philips 12NC
PDS-60ca 7.5 V
Pre-programmed
Power / data supply, (3) EMI
suppression cores, (2) spare
fuses, (8) NPT threaded
seal plugs, and Installation
Instructions
109-000015-00
910503700093
2 in
(51 mm)
OUT 2
Item Number
OUT 1
Included Components
DMX
OUT
Item
DMX/ETHERNET
IN
Ordering Information
Mounting
Slots
.8 in
(20 mm)
1 in
(25 mm)
Mounting Dimensions
Use Item Number when ordering in North America.
OUT 1
DMX/ETHERNET
IN
OUT 2
DMX
OUT
DMX Output
(to next power /
data supply
in series, or
termination)
.8 in
(20 mm)
Data Output 1
(to fixtures)
Data Output 2
(to fixtures)
SELECT FIXTURE TYPE
OPTIONS
OUT 1
OUT 2
DMX/ETHERNET
IN
DMX
OUT
SPEED
MODE
For complete instructions on setting
pre-programmed effects via onboard controls,
refer to the Addressing and Configuration Guide
Onboard Controls
Philips Color Kinetics
3 Burlington Woods Drive
Burlington, Massachusetts 01803 USA
Tel 888.385.5742
Tel 617.423.9999
Fax 617.423.9998
www.philipscolorkinetics.com
available online at www.colorkinetics.com/
support/addressing/
Copyright © 2009 – 2010 Philips Solid-State Lighting Solutions, Inc. All rights reserved.
Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast,
ColorBlaze, ColorBurst, eW Fuse, ColorGraze, ColorPlay, ColorReach, iW Reach, eW Reach,
DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore
are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in
the United States and / or other countries. All other brand or product names are trademarks
or registered trademarks of their respective owners. Due to continuous improvements and
innovations, specifications may change without notice.
DAS-000060-02 R01 12-10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising