user manual
USER MANUAL
Covid HDBase-T Receiver for HDMI
with Built in Audio de-embedding, IR,
and RS232 control pass through
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
USER MANUAL
Contents
Introduction..................................................................................................................................2
Package Contents.........................................................................................................................2
Key Features................................................................................................................................2
Panel Description..........................................................................................................................3
Connection and Installation............................................................................................................4
Technical Specifications.................................................................................................................4
Preparing a RS232 Cable..............................................................................................................5-6
Safety Information.........................................................................................................................7
Warranty.....................................................................................................................................7
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 1
USER MANUAL
Introduction
The RXB-320 is part of Covid’s expanding line of HDBase-T products. The RXB-320 offers an all in one solution when audio stripping is needed on the receiving end. This is done by the integrated audio de-embedder
which offers a 3.5mm TRS stereo line level connection to run to celling amps or any other audio need. The
RXB-320 also offers bidirectional IR and Rs232 control when paired with a compatible transmitter. Single
side connections for HDMI, Control, and Power that provides for cleaner wiring and rack mounting solutions.
The RXB-320 supports local or remote powering options thru POC or PoH PD standards.
Package Contents
• 1×RXB-320
• 1×24V 1A DC power adapter
• 2×Wall mounting tabs
Key Features
• Supports HDMI up to 1080p@60Hz 48bit up to 230ft over one Cat5e/6/7 cable
• Support HDMI 4Kx2K and 3D
• HDCP Compliant
• All connections on one side for easier installation
• Bi-directional RS-232,IR
• Power units from either TX or RX side with wall power supply (PoC) or power with PoE PD;
• Status LED for all connections on front.
• Integrated audio de-embedder
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 2
USER MANUAL
Panel Description
Front Panel
1. Act: This green LED will blink showing that the device is functioning normal on both the receiver
and the transmitter.
2. Pwr: This red LED indicator will show solid when the product is receiving power.
3. HDMI: This green LED solid status shows that the HDCP link is present between the source and the
display. A blinking condition indicates there is not a HDCP connection, and an off condition shows
a problem between the device and the source/destination in the HDMI connections.
4. HDBT: This green LED solid illumination shows that all connections are good and the source and display
are powered on. A blinking condition shows that the RJ45 connection is present, but there is no
source-to-display connection. No illumination shows that there is no connection thru the RJ45
category cable.
1
2
3
4
5
6
1. Power: Connect to DC adapter here to power up device
2. HDBaseT: Connect HDBaseT source here
3. HDMI Output: Connect to display
4. AUD OUT: Audio de-embedded, 3.5mm connector
5. RS232: Connect to a display for control
6. IR: Connect to IR emitter and sensor
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 3
USER MANUAL
Connection and Installation
Audio De-embedding Feature
Unique to the RXB-320 is the ability to extract the audio from the HDMI input through a 3.5mm TRS on the
RX side of the signal chain. The output is a stereo unbalanced signal that can be sent to an external amplifier.
Technical Specifications
Video
HDMI Compliance
HDCP Compliant
Distance
Max Resolution
HDMI 3D, 4K
Yes
230ft. (70m) on 1080p@60Hz
4K*2K
Connectors
TX Connectors
RX Connectors
(1) HDMI, (1)Rj45(HDBT),(2)IR,(1)RS232
(1) HDMI, (1)Rj45(HDBT),(2)IR,(1)RS232, (1)3.5mmTRS
Mechanical
Dimensions
Net Weight
Package Size
Gross Weight
111 x 75 x 25 mm(L/W/H)
1.06lbs[480g]
255 x 140 x 90 mm(L/W/H)
1.676lbs[760g]
Power
Power Supply
24V 1A DC
Environmental
Operation Temperature
Storage Temperature
Relative Humidity
32~131°F [0~55°C]
-4~185°F [-20~85°C]
5~95% RH [no condensation]
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 4
USER MANUAL
Preparing a RS232 Cable
What you will need:
• Two conductor cables with ground
• Wire strippers
• Screwdriver (flat head)
• 3.5mm captive screw connector
• Heat gun and heat shrink (optional)
• Multimeter (optional)
Start by stripping the outer jacket of the cable back by about 1 inch like what is shown in Step 1. Once the
outer jacket is removed, you can optionally add heat shrink around the conductors and over the exposed drain
wire like in the picture of step 2. Next, strip the ends of the conductors back about 3/16” in order to make
good contact inside of the captive screw connector. The final step is to attach the captive screw connector to
the end of the cable according to the pinout.
If you do not know which conductor to use for each pin, use a multimeter to determine how the cable was
built and then compare it with the image below of the male and female DB9 connectors. The conductors that
are connected to the pins with the labels Tx, Rx, and shield should be connected to their respective positions
on the terminal block. A word of caution, the pinout used in these images is for connecting to a RS232 DTE
device. If you are connecting to a DCE device, simply switch the Tx and Rx pins on one end of the cable.
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 5
USER MANUAL
If you are connecting the SB3M to another Covid device with RS232 communications, the cable must be
appropriately pinned out. In order for the devices to communicate, the Tx and Rx pins must be switched on
only one end of the connector. The image below demonstrates how this can be done with two terminal block
connectors.
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 6
!
USER
MANUAL
Safety Information
To reduce the risk of electric shock, do not expose this product to rain or moisture.
!
Do not modify the power supply. Doing so will void the warranty and safety features, and may
result in personal harm.
!
If the power supply does not fit into your local power socket, seek professional assistance.
This equipment should be installed near the socket outlet and the device should be easily
accessible in the case it requires disconnection.
!
Warranty
Parts and labor warranty time is three year and from the date of original shipment. This warranty shall be
void if a serial number has been removed from the product.
Upon determination of a legitimate defect covered by this warranty and at COVID’s sole discretion, user
should bear the transport cost during the warranty.
If product is out of warranty then repair charge is required. Out of warranty repairs will only be made after
cost has been approved by Customers and proper financial arrangements are made. Customer must cover
round trip shipment expenses.
HDBT Receiver - RXB-A320 & RXB-B320
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com | www.covid.com
Page 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising