CMX-12 - AV-iQ
CMX-12
HD/SD Digital AV Mixer
Operation Manual
CMX-12
http://www.meicheng.com.tw
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. meicheng assumes no responsibility
for any infringements of patents or other rights of third
parties which may result from its use.
meicheng assumes no responsibility for any inaccuracies
that may be contained in this document. meicheng also makes no
commitment to update or to keep current the information contained
in this document.
meicheng reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
meicheng.
© Copyright 2010 by meicheng.
All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:







Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No
VS1
Date
20101201
Summary of Change
Add HDCP Description
Table of Contents
1.
Introduction ……………………..……………………...…........….…….
1
2.
Features …………………………………………......……........…...……
2
3.
Major Operating Controls and Their Functions …………………..….
3
■
POSITION/TIME ............................................................................
3
■
FUNCTIONS ..................................................................................
3
■
MODE CONTROL ........................................................................
4
■
DIGITAL EFFECTS ..........................................................................
5
■
ADJUST .........................................................................................
6
■
VIDEO SOURCE SELECT ...............................................................
7
■
VIDEO/AUDIO MIXER ..................................................................
8
■
AUDIO LEVEL ...............................................................................
9
■
REAR PANEL .................................................................................
10
Basic Operations ………..............................……...……..............……
11
A
Input signal selection and Back color Selection .....................
11
B
VIDEO MIX ...................................................................................
12
C
VIDEO WIPE ................................................................................
13
D
Picture-In-Picture .......................................................................
16
E
KEY ...............................................................................................
17
F
AUTO FADE/WIPE Selection ........................................................
18
G
DIGITAL EFFECT ..........................................................................
18
H
AUDIO MIXER ..............................................................................
18
I
OSD ADJUST ..................................................................................
19
5.
Connector and Installation ..................…………..........…..…....…...
20
6.
Specifications ....................................................................................
21
7.
Acronyms ……………...……........……............................................…
22
4.
1. Introduction
This high definition HD/SD digital AV Mixer.
Each input BUS supports 6 inputs (2 x HDMI,
2 x Component, 2 x S-Video and Composite
video) and also Background Color for special
efficiancy. The output supports 1 x HDMI, 2
x Component, 2 x S-Video and Composite
video, it also supports position adjustment and
recording.
The output supports HD/SD resolution for
example, NTSC, NTSC-4.43, PAL, PAL-M, PAN-N,
SECAM, 480p, 576p, 720p 50/60, 1080i 50/60.
The output resolution can auto adjust to
consistency resolution, please refer to the
diagram on the right side.
1
Input
Output
HDMI
HDMI
Component
Component
S-Video
S-Video
Composite
Composite
Digital video--480i,576i,480p,576p,720p50,720p60,1080i50,1080i60
Analog video--480i,576i,480p,576p,720p50,720p60,1080i50,1080i60
Analog video--NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM
2. Features
Selective size and position for digital effects area and PIP windows.

Automatic fade and wipe with speed preset control.

Digital effects- Still,Mosaic,Paint,Negative.

96 wipe patterns.

Chroma key & Luminance key.

High Picture Quality.

3x8 back color.

Joystick control for digital effect position.

Fade control for Video and Audio.

Video and Audio mixing.

Two HDMI source inputs.

Two Component source inputs.

Two Composite and S-Video source inputs.

One HDMI recording outputs.

Two Component recording outputs.

One Composite and S-Video recording outputs.

One Composite and S-Video preview outputs(OSD).

Auxiliary audio input.

Microphone input and headphone output.

Picture in Picture control.(3 window sizes)

Each A/B BUS can adjust the Contrast / Brightness / Color / HUE / Detail &

Aspect Ration.
Supports Lip-Sync delay up to 170ms.

Composite supports 3D comb filter and YC separation.

Motion and Edge Adaptive De-interlacing.

Note: When receiving content that has HDCP encryption there will be no
video output except for HDMI output port.
2
3. Major Operating Controls and Their Functions
POSITION/TIME
n
CMX-12
VIDEO EFFECTS MIXER
+3
+4
MODE CONTROL
-10
+4
-15
AUDIO
LEVEL
FUNCTIONS
TIME
-15
CMX-12
VIDEO EFFECTS MIXER
ONE-WAY
REVERSE
①
MULTI
FUNCTIONS
TIME
MODE CONTROL
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
-3
-1
0
+1
+2
-10
-5
-3
-1
0
+1
+2
WIPE
DIGITAL EFFECTS
ONE-WAY
-5
L
DB
R
STILL
PAINT
DIGITAL EF
DB
+3
PIP
ADJUST
ADJUST
NEGATIVE
MOSAIC
A
MIN
MAX
DEMO
ON
POSITION
A SOURCE
B SOURCE
1/2
MIN
MAX
1/2
1/3
1/4
EDGE
1/3
B
COLOR
1/4
L-KEY 1/2
SCAN
MIX
KEY
B-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
VIDEO
POSITION
INPUT A
MAX
A SOURCE
1/2
②
AUDIO FOLLOW
B SOURCE
INPUT B
MAX
AUX
MAX
ON
MIC
MAX
MAX
A
HDMI 1
HDMI 2
1/3
HD INPUT 1
HD INPUT 2
ON
SD INPUT 1
1/4
EDGE
BACK
COLOR
SD INPUT 2
COLOR
AUTO / WIPE
B
MIN
MIN
MIN
MIN
MIN
START
L-KEY 1/2
B-KEY 1/2
① Time ControlVIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
For adjusting the transition time of Auto Fade function and Auto take function.
VIDEO
② Joystick control
-15 -10
MAX
This joystick control has two functions controls the position of the Square
wipe
L
AUDIO
LEVEL
pattern and P-IN-P picture.
R
-15
FUNCTIONS
VIDEO EFFECTS MIXER
n
CMX-12
ONE-WAY
HDMI 2
REVERSE
HDMODE
INPUT 2CONTROL
SD INPUT 1
HD INPUT 1
MULTI
WIPE
④
FUNCTIONS
B
⑤
BACK
DIGITAL
COLOR
SD INPUT 2
AUDIO
LEVEL
PIP
CMX-12
VIDEO EFFECTS MIXER
TIME
③
-3
-5
-3
A
A
FUNCTIONSHDMI 1
TIME
-10
-5
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
-15
-10
-5
-15
-10
-5
L
R
EFFECTS
-3
-1
0
+1
+2
+3
+4
-3
-1
0
+1
+2
+3
+4
DB
DB
DIGITAL EFFECTS
ADJUST
STILL
PAINT
NEGATIVE
MOSAIC
ADJUST
A
MIN
MAX
DEMO
ON
POSITION
N
MAX
POSITION
1/2
⑥
1/3
⑦
A SOURCE
1/4
B SOURCE
MIX
1/2
1/3
L-KEY 1/2
B-KEY 1/2
KEY
1/4
EDGE
VIDEO SOURCE SELECT
⑧
B
COLOR
VIDEO
MAX
A SOURCE
1/2
AUDIO FOLLOW
INPUT A
MAX
INPUT B
MAX
STILL
AUX
MAX
A
MIN
PAINT
MIC
NEGATIVE
MAX
B SOURCE
1/3
1/4
A
EDGE
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
COLOR
SD INPUT 1
SD INPUT 2
1)
1!
B
ON
BACK
COLOR
AUTO / WIPE
B
⑨
ON
VIDEO/AUDIO MIXER
SCAN
MIN
MIN
MIN
MIN
MIN
START
L-KEY 1/2
B-KEY 1/2
③ One-way wipe button.
④ Reverse wipe button.
⑤ Multiple wipe button.
⑥ Straight wipe button.
⑦ Split wipe button.
⑧ Corner wipe button.
A
⑨ Diagonal wipe button.
Triangle
wipe HD
button.
HDMI 1 ⑩ HDMI 2
HD INPUT 1
INPUT 2
SD INPUT 1
⑪ Square wipe button.
VIDEO SOURCE SELECT
B
VIDEO/AUDIO MIXER
VIDEO
MAX
INPUT A
AUDIO FOLLOW
ON
SD INPUT 2
BACK
COLOR
3
AUTO / WIPE
MAX
SE
LEVEL
R
DB
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
MODE CONTROL
n
MODE CONTROL
MULTI
WIPE
DIGITAL EFFECTS
PIP
1@
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
AUDIO
LEVEL
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
ADJUST
DB
R
DB
ADJUST
DIGITAL EFFECTS
ADJUST
STILL
PAINT
ADJUST
NEGATIVE
MOSAIC
1#
A
MIN
MAX
1/4
MIX
1$
A SOURCE
KEY
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
1/4
ON
EDGE
ON
B
COLOR
PAINT
STILL
VIDEO SOURCE SELECT
1%
DEMO
A
POSITION
VIDEO/AUDIO MIXER
VIDEO
MAX
SCAN
NEGATIVE
INPUT A
AUDIO FOLLOW
MAX
INPUT B
MAX
DEMO
MOSAIC
AUX
MAX
MIC
MAX
OURCE
1/4
EDGE
B
A
COLOR
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
AUTO / WIPE
B
1^
SCAN
ON
BACK
COLOR
1&
MIN
MIN
MIN
MIN
MIN
START
1/2
UT 2
VIDEO/AUDIO MIXER
⑫ Wipe button
VIDEO
INPUT A
INPUT B
AUX
MIC
For selecting the wipe effect.
MAX
⑬ PIP button
AUDIO FOLLOW
MAX
MAX
MAX
MAX
Picture in picture mode can be selected by pressing this button.
⑭ Mix(Fade) button
Press this button to select the fade In/Out mode.
ON
⑮ KEY button
BACK
ThisSDbutton
allows
you to tune in a best performance point for the blue key
SD INPUT 1
INPUT 2
COLOR
and luma key effects.
AUTO / WIPE
⑯ EDGE button
Press WIPE button, can select sharp edge / soft edge or color edge.
MIN
⑰ COLOR button
MIN
MIN
MIN
MIN
START color of frame.
Press color edge, can select eight different
4
LEVEL
R
DB
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
DIGITAL EFFECTS
n
DIGITAL EFFECTS
ADJUST
•(
2)
2!
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
DB
R
DB
ADJUST
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
•*
AUDIO
LEVEL
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
ADJUST
STILL
PAINT
NEGATIVE
MOSAIC
ADJUST
2@
A
MIN
A
MAX
A SOURCE
DEMO
ON
STILL
PAINT
DEMO
ON
POSITION
NEGATIVE
MOSAIC
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
1/4
EDGE
VIDEO SOURCE SELECT
B
COLOR
VIDEO/AUDIO MIXER
VIDEO
MAX
B
SCAN
HDMI 1
HDMI 2
HD INPUT 1
2$
2%
2^
2&
INPUT A
AUDIO FOLLOW
SD INPUT 2
⑱ A-bus digital effect ON button.
INPUT A
INPUT B
AUX
MIC
⑲ A-bus Still button and osd left adjust.
MAX ⑳ A-bus Paint button and osd right adjust.
AUDIO FOLLOW
MAX
MAX
MAX
MAX
2• A-bus Negative button and osd up adjust.
2@ A-bus Mosaic button and osd down adjust.
2# B-bus digital effect ON button.
ON button.
2$ B-bus Still
2% B-bus Paint button.
2^ B-bus Negative button.
/ WIPE
Mosaic
button.
2& B-busAUTO
MIN
MIN
MIN
MIN
START
5
MIN
MIC
MAX
MAX
MIN
MIN
MIN
MIN
BACK
COLOR
AUTO / WIPE
START
VIDEO
AUX
MAX
ON
SD INPUT 1
MIN
UDIO MIXER
INPUT B
MAX
A
HD INPUT 2
B
2#
SCAN
PUT 2
LEVEL
R
DB
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
ADJUST
n
MODE CONTROL
WIPE
DIGITAL EFFECTS
PIP
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
AUDIO
LEVEL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
1/4
EDGE
COLOR
-10
-5
-3
-1
0
+1
+2
+3
+4
-10
-5
-3
-1
0
+1
+2
+3
+4
DB
DIGITAL EFFECTS
ADJUST
DB
MODE CONTROL
-15
-15
L
R
ADJUST
ADJUST
ADJUST
2*
A
MIN
MAX
DEMO
ON
POSITION
MIX
A SOURCE
KEY
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
ON
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
STILL
VIDEO
NEGATIVE
MOSAIC
PAINT
DEMO
SCAN
INPUT A
AUDIO FOLLOW
NEGATIVE
MAX
INPUT B
MAX
AUX
MAX
MOSAIC
MIC
2(
MAX
B
A
COLOR
PAINT
B
MAX
EDGE
A
STILL
SCAN
ON
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
B
MIN
MIN
MIN
MIN
MIN
3)
START
button MIXER
2• Adjust VIDEO/AUDIO
VIDEO
INPUT A
INPUT B
AUX
MIC
When LED switched off, the SDP review output side will show AB-bus / output
source and output
format.
When LED illuminate,
the suer
can press
19 20 21
MAX
AUDIO FOLLOW
MAX
MAX
MAX
MAX
and 22 buttons to adjust the values.
2( DEMO button
When LED illuminate, the auto DEMO will switch to ON and the system will auto
ON
sequence Demo 96 wipe patterns,
press 1 TIME button to adjust the auto
BACKsequence.
COLOR
3) SCAN button
AUTO / WIPE
Press SCAN button for 3 seconds,
the system will enter into SCAN function and
will SCAN the input ports from 1 to 6 and record each port's format to the
MIN
system.
MIN
MIN
MIN
MIN
START
6
A SOURCE
B SOURCE
1/2
1/3
1/4
EDGE
B
COLOR
SCAN
VIDEO SOURCE SELECT
n
L-KEY 1/2
B-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
AUDIO
LEVEL
VIDEO
CMX-12
FUNCTIONS
TIME
ONE-WAY
MAX
MODE CONTROL
REVERSE
MULTI
WIPE
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
DB
DB
INPUT A
VIDEO EFFECTS MIXER
-15
L
R
INPUT B
DIGITAL EFFECTS
PIP
MIC
ADJUST
AUDIO FOLLOW
AUX
MAX
ADJUST
MAX
MAX
MAX
A
MIN
3!
3@
3#
3$
3%
3^
3&
MAX
1/2
1/3
1/4
MIX
KEY
1/4
EDGE
COLOR
DEMO
ON
POSITION
A SOURCE
PAINT
STILL
NEGATIVE
MOSAIC
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
B
SCAN
A
ON
VIDEO SOURCE SELECT
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
VIDEO/AUDIO MIXER
VIDEO
BACK
COLOR
MAX
A
AUTO / WIPE
B
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
3(
4)
4!
4@
4#
4$
MAX
INPUT B
MAX
AUX
MIC
MAX
MAX
MIN
MIN
ON
BACK
COLOR
AUTO / WIPE
B
3*
INPUT A
AUDIO FOLLOW
MIN
MIN
START
MIN
MIN
MIN
MIN
MIN
START
Used to select Source1,HDMI1.
Used to select Source2,HDMI2.
Used to select Source3,HD input 1.
Used to select Source4,HD input 2.
Used to select Source5,SD input 1. When connecting both S-Video and CV
at the same the time S-Video will be the first priority source to be display.
3^4# Used to select Source5,SD input 2. When connecting both S-Video and
Video at the same the time S-Video will be the first priority source to be
display.
A-bus back color select, can select one out of eight colors.
3&
B-bus back color select, can select one out of eight colors.
4$
3!3*
3@3(
3#4)
3$4!
3%4@
7
MIN
ON
POSITION
A SOURCE
1/2
STILL
PAINT
NEGATIVE
MOSAIC
B SOURCE
1/3
1/4
EDGE
B
COLOR
SCAN
VIDEO/AUDIO MIXER
n
L-KEY 1/2
B-KEY 1/2
VIDEO SOURCE SELECT
AUDIO
LEVEL
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
VIDEO/AUDIO MIXER
DB
R
VIDEO
DB
INPUT A
INPUT B
AUX
MIC
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
MAX
ADJUST
NEGATIVE
MOSAIC
A
MIN
MAX
A SOURCE
1/2
PAINT
1/3
1/4
EDGE
B
COLOR
HDMI 2
HD INPUT 1
HD INPUT 2
SCAN
SD INPUT 1
BACK
COLOR
SD INPUT 2
B-KEY 1/2
VIDEO SOURCE SELECT
MAX
B
AUDIO FOLLOW
INPUT A
MAX
INPUT B
MAX
AUX
MAX
MIN
MIN
MIN
MIN
AUTO / WIPE
MAX
4^
ON
HD INPUT 1
MAX
4(
MIC
A
HDMI 2
MAX
VIDEO/AUDIO MIXER
VIDEO
HDMI 1
MAX
ON
B SOURCE
HDMI 1
L-KEY 1/2
A
STILL
MAX
4*
4%
DEMO
ON
POSITION
AUDIO FOLLOW
ADJUST
HD INPUT 2
SD INPUT 1
SD INPUT 2
MIN
MIN
5!
5@
5#
5$
4&
AUTO / WIPE
B
5)
START
BACK
COLOR
MIN
MIN
MIN
MIN
START
4% A-bus LED indicator.
4^ B-bus LED indicator.
When VIDEO slider move to A-bus the A-bus's LED will illuminate and move the
slider to B-bus the B-bus's LED will illuminate. When slider move in between A-bus
and B-bus the two LED will alternate illuminatd. When in Auto/Wipe the status
will be the same condition.
4& VIDEO slide.
Wipe, PIP and Key effects could be controlled by this Video slide which moves
A/B bus outputs horizontally or vertically.
4* AUDIO FOLLOW.
When turn on the Audio Follow A/B bus's sound indicator will follow the
VIDEO slider movement. When turn off the Audio Follow, the audio indicator
will become independent to adjust from 5! and 5@.
4( AUTO/WIPE.
AUTO FADE/WIPE can be performed with START 5) button when the button
4( is set to ON.
5) START button.
Automatic MIX and WIPE operation can be performed by pressing the START
button. Transition time can be adjusted via TIME ① . When transition time
lapsed, the LED goes off.
5! INPUT A:Controls the audio level of the input A.
5@ INPUT B:Controls the audio level of the input B.
5# AUX:Controls the audio level of the Auxiliary input.
5$ MIC:Controls the audio level of the Microphone input.
8
SE
URCE
AUDIO LEVEL
n
AUDIO
LEVEL
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
-15
DB
R
DB
AUDIO
LEVEL
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
ADJUST
STILL
PAINT
NEGATIVE
MOSAIC
ADJUST
MAX
-3
POSITION
1/3
L-KEY 1/2
B-KEY 1/2
VIDEO SOURCE SELECT
1/4
EDGE
+2
+3
+4
-10
-5
-3
-1
0
+1
+2
+3
+4
5%
B
COLOR
MODE CONTROL
VIDEO
WIPE
+1
DB
-15
SCAN
VIDEO/AUDIO MIXER
MULTI
0
R
B SOURCE
1/2
-1
DEMO
ON
A SOURCE
-5
DB
A
MIN
-10
L
PIP
MAX
INPUT A
AUDIO FOLLOW
DIGITAL EFFECTS
INPUT B
AUX
ADJUST
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
ADJUST
A
ON
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
B
1/4
MIX
KEY
A
MIN
DEMO
START
ON
STILL
PAINT
NEGATIVE
MOSAIC
5% Audio level indicator.(Audio level)
B
1/4 This indicator
EDGEshows
COLOR
the audio output level of REC
out 1 and REC out 2.
SCAN
1/2
UT 2
VIDEO/AUDIO MIXER
VIDEO
MAX
INPUT A
AUDIO FOLLOW
INPUT B
AUX
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
ON
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
MIN
START
9
REAR PANEL
n
5*
5(
6)
HD AUDIO INPUT
R1
L1
R2
6!
6@
SD AUDIO INPUT
L2
R1
Y
HD INPUT 1
Pb
L1
AUX INPUT
R2
L2
SD INPUT 1
V
Pr
R
R1
L1
HD OUTPUT 1
Y
Pb
R2
L2
Pr
SD PREVIEW
V
S
DC INPUT
12V 3.0A
HDMI OUTPUT
HDMI 2
Y
6%
6$
AUDIO OUTPUT
L
S
HDMI INPUT
HDMI 1
6#
6^ 6&
Pb
HD INPUT 2
6*
Pr
V
SD INPUT 2
6(
S
7)
5* Source 3 HD audio input 1.
5( Source 4 HD audio input 2.
6) Source 5 SD audio input 1.
6! Source 6 SD audio input 2.
6@ Auxiliary Audio input Jack.
6# Recording out 1 Audio output Jack.
6$ Recording out 2 Audio output Jack.
6% Source 1 HDMI input 1.
6^ Source 2 HDMI input 2.
6& Source 3 HD Y-PB-PR Video input 1.
6* Source 4 HD Y-PB-PR Video input 2.
6( Source 5 SD Video and YC input 1.
7) Source 6 SD Video and YC input 2.
7! HDMI output for monitor.
7@ Recording out 1 HD Y-PB-PR Video output jack.
7# Recording out 2 HD Y-PB-PR Video output jack.
7$ SD PREVIEW out(OSD) Video and YC output jack.
7% SD Recording out Video and YC output jack.
7^ DC INPUT 12V 2.0A.
10
Y
Pb
HD OUTPUT 2
7! 7@
7#
Pr
7$
V
SD OUTPUT
7%
S
7^
4. Basic Operations
Press the power switch on the rear panel to the ON Position. The LED's on the
operation panel light up and the unit is now in inital mode for operation.
-15
AUDIO
LEVEL
-10
-5
-3
-1
0
+1
+2
+3
+4
L
DB
R
DB
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
ADJUST
NEGATIVE
MOSAIC
ADJUST
A
MIN
MAX
DEMO
ON
POSITION
A SOURCE
STILL
PAINT
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
1/4
EDGE
VIDEO SOURCE SELECT
B
COLOR
SCAN
VIDEO/AUDIO MIXER
VIDEO
MAX
INPUT A
AUDIO FOLLOW
INPUT B
AUX
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
A
ON
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
B
MIN
START
A. Input signal selection and Back color Selection
1. Slide the Video slide 4& to the A-bus position.
A-bus LED 4% will illuminate, B-bus LED will turn off.
2. Press any of the Source 1 to Source 6 and Back color button.
You will see the corresponding picture on the screen.
3. Press a Back Color button to select the back color you need.
Any of the 8 Back Colors-BlueRedMagentaGreenCyanYellowWhiteBlack.
can be selected by reapeatedly pressing the Back color selection button
3&.
4. The same procedures apply to the B-bus.
* When the selected input source is not connected with source input or
HDCP protection, the image will show with Blue screen.
11
RSE
3
L-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
VIDEO
INPUT A
INPUT B
MAX
2
AUDIO FOLLOW
L
MAX
AUDIO
LEVEL
R
MAX
1
4
CMX-12
VIDEO EFFECTS MIXER
A
-
ON
HDMI 1
HDMI 2
FUNCTIONS
TIME
HD INPUT 1
HD INPUT 2
SD INPUT
1
SD INPUT
2
ONE-WAY
REVERSE
MODE CONTROL
BACK
MULTI
COLOR
WIPE
DIGITAL EFFECTS
PIP
A
MIN
3
MAX
1/2
1/3
-15
A SOURCE
L
AUDIO
1/2
LEVEL
R
B. VIDEO MIX
-10 -5
-3
B SOURCE
1/3
-15
L-KEY 1/2
-10
-1
0
+1
+2
+3
KEY
ON
-5
-3
PIP
MIN
STILL
DB
-1
EDGE
DB
0
+1
+2
+3
B
COLOR
+4
B-KEY 1/2
ADJUST
ADJUST
VIDEO/AUDIO MIXER
VIDEO
MAX
AUDIO FOLLOW
A
1/4
MIX
KEY
DEMO
2
ON
1
1/4
EDGE
COLOR
HDMI 1
PAINT
STILL
B
HD INPUT 1
HDMI 2
NEGATIVE
A
HD INPUT 2
MOSAIC
SD INPUT 1
SD INPUT 2
4
BACKSCAN
COLOR
ON
AUTO / WIPE
B
VIDEO/AUDIO MIXER
VIDEO
MAX
3
MIN
INPUT A
AUDIO FOLLOW
MAX
INPUT B
MAX
AUX
MAX
MIC
START
MAX
Reset the operation panel to initial mode:
1. Press the MIX button 1$.
2. Press one of the A-bus selection button.
3. Press one of the B-bus selection button.
4. Mix effect could be controlled by Video slide 4& which sliding A to B or B to A.
ON
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
MIN
MIN
START
12
MIN
MIN
MIN
PAIN
+4
1/4
VIDEO
SOURCE
SELECT
DIGITAL
EFFECTS
MODE CONTROL
WIPE
MIX
MIN
START
POSITION
MULTI
1/4
Y 1/2
PUT 2
AUTO / WIPE
B
OURCE
3
B-KEY 1/2
MIN
RSE
3
POSITION
-15
A SOURCE
L
AUDIO
1/2
LEVEL
R
C.VIDEO WIPE
WIPE
-10
-1
0
+1
+2
+3
PIP
+4
DB
1/4
-5
-3
-1
EDGE
DB
0
+1
+2
+3
B
COLOR
+4
B-KEY 1/2
VIDEO
SOURCE
SELECT
DIGITAL
EFFECTS
MODE CONTROL
MULTI
1/3
-15
L-KEY 1/2
-10 -5
-3
B SOURCE
ADJUST
ADJUST
1
VIDEO/AUDIO MIXER
VIDEO
MAX
1/4
MIX
KEY
DEMO
2
ON
PAINT
STILL
NEGATIVE
A
MOSAIC
OURCE
3
1/4
EDGE
5
Y 1/2
PUT 2
AUDIO FOLLOW
A
COLOR
HDMI 1
B
HD INPUT 1
HDMI 2
HD INPUT 2
SD INPUT 1
SD INPUT 2
6
VIDEO
MAX
AUTO / WIPE
3
MIN
INPUT A
AUDIO FOLLOW
MAX
INPUT B
MAX
AUX
MAX
MIC
START
MAX
Reset the operation panel to initial mode:
1. Press the WIPE button 1@.
2. Press one of the A-bus selection button.
3. Press one of the B-bus selection button.
4. WIPE effect could be controlled by Video slide 4& which moves A/B bus
outputs Horizontally or vertically.
5. Press 1^ EDGE butten to select frame sharp edge / soft edge / color edge.
6. When frame color is "color edge, press 1& COLOR button to select one out
of eight colors to display.
ON
SD INPUT 1
4
BACKSCAN
COLOR
B
VIDEO/AUDIO MIXER
ON
SD INPUT 2
BACK
COLOR
AUTO / WIPE
MIN
MIN
START
13
MIN
MIN
MIN
CMX-12
VIDEO EFFECTS MIXER
WIPE PATTERN Selection:
n
Six wipe modes can be selected as
follows:
1. Press the straight wipe button ⑥
repeatedly, Four patterns are
available.
FUNCTIONS
TIME
MIN
REVERSE
MULTI
③
④
⑤
1/2
1/3
1/4
MAX
⑥
1
POSITION
3
A SOURCE
1/2
2
⑨
L-KEY 1/2
2. Press the corner wipe button ⑦
repeatedly, Four patterns are
available.
MODE CO
ONE-WAY
⑦
5
MIX
⑧
B SOURCE
1/3
4
WIPE
1)
1/4
6
EDGE
1!
B-KEY 1/2
5. Press the split wipe button 1)
repeatedly, Four patterns are
available.
VIDEO SOURCE SELECT
A
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
B
3. Press the diagonal wipe button ⑧
repeatedly, Four patterns are
available.
6. Press the square wipe button 1!
repeatedly.
Four patterns below are available.
Each pattern position in this section
could be set by joystick ②.
4. Press the triangle wipe button ⑨
repeatedly, Four patterns are
available.
14
BACK
COLOR
MAX
POSITION
-10
-5
-15
-10
-3
-1
-5
0
-3
+1
-1
+2
0
+3
+1
+4
+2
A SOURCE L B SOURCE
L
AUDIO
MULTIPLE PATTERN Selection:
n
-15
L-KEY 1/2
ONE-WAY ONE-WAY
REVERSE REVERSE
MULTI
MULTI
③ 3
④ 3
⑤
1/2 1/3
1/3 1/4
1/4
3
-10
WIPE
1
WIPEPIP
PIP
2
-15
-5
EDGE
-10
-3
-1
-5
0
-3
+1
-1
+3
+1
1/3 1/4
1/4
+4
+2
+3
DB
+4
VIDEO
ADJUST
ADJUST
⑫
MAX
MIX
MIXKEY
DEMO
4
ON
ONSTILL
EDGE
EDGE
COLOR
COLOR
HDMI 1
HDMI 2
STILL
PAINT
A
HD INPUT 1
AUDIO F
A
KEY
⑥
1/2 1/3
+2
0
DB
COLOR
DB
VIDEO/AUDIO
ADJUST
ADJUST MIXER
MOSAIC
PAINT
NEGATIVE NEGATIVE
HD B
INPUT 2
SD INPUT 1
B
DEMO
MOSAIC
A SOURCEA SOURCE
B SOURCEB SOURCE
1/2
ST
+4
B-KEY 1/2
A
1/2
1/4
SELECT
MODE CONTROL
MODE CONTROL VIDEO SOURCE
DIGITAL
DIGITAL
EFFECTSEFFECTS
FUNCTIONS
FUNCTIONS
+3
DB
AUDIO
1/2LEVEL R LEVEL
1/3
R
CMX-12
CMX-12
VIDEO EFFECTS
VIDEOMIXER
EFFECTS MIXER
SD INPUT 2
BACK
COLOR
4•
6
SCAN
O
SCAN
AUTO
B
L-KEY 1/2 L-KEY
B-KEY
1/2 1/2 B-KEY 1/2
SELECT
OURCE SELECT
I2
-15
VIDEO/AUDIO
VIDEO/AUDIO
MIXER MIXER
VIDEO
MAX
5
MIN
VIDEO
MAX
INPUT A
AUDIO FOLLOW
AUDIO FOLLOW
INPUT
A B
INPUT
INPUTAUX
B
AUXMIC
STA
MIC
MAX
MAXMAX
MAXMAX
MAXMAX
MAX
MIN
MIN MIN
MIN MIN
MIN MIN
MIN
1. Press the wipe button 1@.
2. Press the straight wipe button ⑥ for example.
3. Press the multi ⑤ button repeatedly to have the desired multiplication.
Four patterns are available.
4. Press one of the A-bus selection button.
5. Press one of the B-bus selection button.
6. Operate the video slide 4&.
* The same procedures apply to other patterns.
A
A
ON
BACK
HDMI
HD INPUT
2
1HD INPUT
HD INPUT
1 2HD INPUT
SD INPUT
2 1SD INPUT
SD INPUT
1 2SD INPUT 2
COLOR
B
ON
BACK
COLOR
AUTO / WIPE
AUTO / WIPE
B
MIN
MIN
START
START
ONE-WAY WIPE:
n
1.
2.
3.
4.
5.
6.
Press the wipe button 1@.
Press the straight wipe button ⑥ for example.
Press the one-way ③ button.
Press one of the A-bus selection button.
Press one of the B-bus selection button.
Operate the video slide 4&.
A bus
B bus
* The wipe scene moves
the same way every time
the control is operated.
REVERSE WIPE:
n
1.
2.
3.
4.
5.
6.
Press the wipe button 1@.
Press the straight wipe button ⑥ for example.
Press the Reverse ④ button.
Press one of the A-bus selection button.
Press one of the B-bus selection button.
Operate the video slide 4&.
15
A bus
B bus
* The wipe scene moves
the reverse direction
every time the control is
operated.
1
POSITION
-10 -5
-15
AUDIO
LEVEL
D. Picture-In-Picture
-3
-1
0
+1
L
WIPE
ONE-WAY
-15
-10
-5
-3
-1
0
+1
B SOURCE
DB
+2
+3
WIPE
-3
-1
0
+1
+2
+3
1/2
5
POSITION
COLOR
1/3
ON
⑥
A SOURCE
1/4
2
PAINT
STILL
⑦
⑧
-10
-5
D
-3
-1
0
+1
+2
+3
1/3
1/4
⑨
⑩
⑪
L-KEY 1/2
B-KEY 1/2
B
VIDEO/AUDIO MIXER
ADJUST
DIGITAL EFFECTS
PIP
ADJUST
A
VIDEO
A
MIX
KEY
DEMO
MOSAIC
NEGATIVE
HDMI 1
HDMI 2
EDGE
ON
A
HD INPUT 1
COLOR
3
VIDEO SOURCE
VIDEO/AUDIO
SELECT
MIXER
INPUT A
MAX
AUDIO F
STILL
HD INPUT 2
SD INPUT 1
SCAN
SD INPUT 2
PAINT
NEGATIVE
1
BACK
B
COLOR
MOSAIC
4•
O
AUTO
B
VIDEO
AUDIO FOLLOW
INPUT B
MAX
MAX
MIN
VIDEO/AUDIO MIXER
AUX
VIDEO MIC
MAX
MAX
INPUT A
MAX
AUDIO FOLLOW
MAX
INPUT B
MAX
Press the operation panel to initial mode:
1. Slide the video slide fully to the B-bus position.
2. Press one of the A-bus selection button.
3. Press one of the B-bus selection button.
4. Press the PIP button f.
5. PIP mode changes by selecting ⑥ ~ ⑪ buttons.
⑥. Shows sub-picture in 1/2 size without edge.
⑦. Shows sub-picture in 1/3 size without edge.
⑧. Shows sub-picture in 1/4 size without edge.
⑨. Shows sub-picture in 1/2 size with edge.
⑩. Shows sub-picture in 1/3 size with edge.
⑪. Shows sub-picture in 1/4 size with edge.
6. Other PIP features:
1. 3 PIP sizes selectable for sub-picture PIP channel.
2. The color of the edge can be changed by pressing back color select
button ⑰.
3. When you slide the video slide •• to the A-bus position PIP picture
dissolves into back ground scene.
4. Sub-picture PIP channel may be placed into different positions by
oystick w.
AUX
MAX
A
ON
SD INPUT 2
BACK
HDMI 1
COLOR
HDMI 2
HD INPUT 1
HD INPUT 2
B
ON
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
AUTO / WIPE
MIN
MIN
MIN
MIN
MIN
MIN
START
A bus
B bus
+4
B-KEY 1/2
B SOURCE
1/2
ST
D
MAX
MAX KEY
+4
COLOR
-15
A
EDGE
-5
⑬
4
MIN
MIX
-10
L
AUDIO
LEVEL EDGE
R
1/4
DB
+4
VIDEO SOURCE
SELECT
MODE CONTROL
MULTI
-15
1/3
L-KEY 1/2
REVERSE
+4
1/2
FUNCTIONS
DIGITAL EFFECTS
PIP
+3
A SOURCE
R
CMX-12
VIDEO EFFECTS MIXER
MODETIME
CONTROL
+2
MIN
START
A bus
Edge
Unedge
B bus
1/2
16
1/2
MIN
MIN
STA
M
1
1
POSITION
-10 -5
-15
AUDIO
LEVEL
E. KEY
-3
-1
0
+1
L
-10
-5
-3
-1
0
+1
ONE-WAY
REVERSE
-15
B SOURCE
DB
1/3
+2
+3
L-KEY 1/2
MULTI
WIPE
-10
L
AUDIO
LEVEL EDGE
R
1/4
DB
+4
-15
-5
-3
-1
0
+1
+2
+3
-10
-5
D
-3
-1
0
+1
+2
+3
1
POSITION
1/2
⑥ 6
⑮
A SOURCE
EDGE
COLOR
4
1/3
ON
1/4
STILL
⑦
⑧
ADJUST
A
VIDEO
1/3
1/4
⑨
⑩
⑪
L-KEY 1/2
B-KEY 1/2
2
PAINT
KEY
DEMO
MOSAIC
NEGATIVE
B
HDMI 1
HDMI 2
EDGE
ON
A
STILL
HD INPUT 1
COLOR
HD INPUT 2
SD INPUT 1
SCAN
SD INPUT 2
PAINT
MOSAIC
NEGATIVE
4•
5
BACK
B
COLOR
O
AUTO
B
3
VIDEO SOURCE
VIDEO/AUDIO
SELECT
MIXER
VIDEO
INPUT A
MAX
AUDIO F
A
MIX
B SOURCE
1/2
+4
VIDEO/AUDIO MIXER
ADJUST
DIGITAL EFFECTS
PIP
A
MAX KEY
ST
D
COLOR
MAX
MIN
MIX
+4
B-KEY 1/2
VIDEO SOURCE
SELECT
MODE CONTROL
FUNCTIONS
DIGITAL EFFECTS
PIP
+4
1/2
CMX-12
VIDEO EFFECTS MIXER
WIPE
+3
A SOURCE
R
-15
MODETIME
CONTROL
+2
AUDIO FOLLOW
INPUT B
MAX
MIN
VIDEO/AUDIO MIXER
VIDEO MIC
AUX
MAX
MAX
MAX
INPUT A
AUDIO FOLLOW
INPUT B
MAX
Reset the operation panel to initial mode:
How to use the Luma key effect:
n
1. Press the KEY button h.
FUNCTIONS
MODE CONTROL
2. Press one of the A-bus selection button.
3. Press one of the B-bus selection button.
4. Press the LUMA KEY button o.
5. Use slide bar to control the Luma key level.
6. Press button y or u to change the source that is being keyed.
7. Press the LUMA KEY o once again to achieve Negative Luma Key.
MAX
STA
AUX
MAX
M
MAX
CMX-12
VIDEO EFFECTS MIXER
A
ON
SD INPUT 2
BACK
HDMI 1
COLOR
HDMI 2
HD INPUT 1
HD INPUT 2
B
SD INPUT 1
BACK
COLOR
SD INPUT 2
ONE-WAY
REVERSE
MULTI
1/2
1/3
1/4
AUTO / WIPE
MIN
MAX
POSITION
-10 -5MIN-3
-15
-1
0MIN +1
START
L
AUDIO
LEVEL
R
-10
-5
-3
-1
0
+1
REVERSE
PIP
MIX
KEY
+2
WIPE
MIN
-15
B SOURCE
DB
+3
1/4
DB
-10
START
L
AUDIO
LEVEL EDGE
R
+4
-15
-5MIN-3
-1
0MIN +1
ON
MIN +4
+2 +3
D
COLOR
-10
-5
-3
D
-1
0
+1
+2
+3
VIDEO/AUDIO MIXER
ADJUST
DIGITAL EFFECTS
PIP
ADJUST
A
MAX KEY
1
POSITION
⑮
1/2
⑥ 6
A SOURCE
EDGE
COLOR
1/3
ON
1/4
STILL
⑦
⑧
A
PAINT
1/3
1/4
⑨ 4
⑩
⑪
B
AUDIO F
A
MIX
KEY
DEMO
MOSAIC
NEGATIVE
ON
A
STILL
B SOURCE
1/2
L-KEY 1/2
2
HDMI 1
HDMI 2
EDGE
HD INPUT 1
COLOR
HD INPUT 2
SD INPUT 1
SCAN
SD INPUT 2
PAINT
NEGATIVE
5
BACK
B
COLOR
MOSAIC
4•
O
AUTO
B
B-KEY 1/2
3
VIDEO SOURCE
VIDEO/AUDIO
SELECT
MIXER
VIDEO
INPUT A
MAX
AUDIO FOLLOW
INPUT B
MAX
MAX
MIN
VIDEO/AUDIO MIXER
AUX
VIDEO MIC
MAX
MAX
INPUT A
MAX
AUDIO FOLLOW
MAX
INPUT B
AUX
MAX
MAX
MIN
MIN
How to use the Blue key effect:
n
1. Press the KEY button h.
2. Press one of the A-bus selection button.
3. Press one of the B-bus selection button.
4. Press the Blue KEY button a .
5. Use slide bar to control the Blue key level.
6. Press button y or u to change the source that is being keyed.
7. Press the Blue KEY a once again to achieve Negative Blue Key.
A
ON
SD INPUT 2
BACK
HDMI 1
COLOR
HDMI 2
HD INPUT 1
+4
VIDEO
MAX
MIN
MIX
ST
B-KEY 1/2
VIDEO SOURCE
SELECT
MODE CONTROL
MULTI
MIN
1/3
L-KEY 1/2
FUNCTIONS
DIGITAL EFFECTS
ONE-WAY
MIN +4
+3
1/2
CMX-12
VIDEO EFFECTS MIXER
PIP
+2
A SOURCE
-15
WIPE
WIPE
AUTO / WIPE
MIN
MODETIME
CONTROL
DIGITAL EFFECT
ON
TIME
HD INPUT 2
B
SD INPUT 1
ON
SD INPUT 2
BACK
COLOR
AUTO / WIPE
MIN
AUTO / WIPE
MIN
MIN
START
MIN
MIN
MIN
MIN
START
17
STA
M
1/2
1/3
1/4
EDGE
B
COLOR
F. AUTO FADE/WIPE Selection
Reset the operation panel to initial mode:
1. Press the ON button •• to enter into AUTO FADE/
WIPE mode.
2. FADE/WIPE transition time can be adjusted by
operating TIME control q.
3. Press the WIPE button d for wipe effect.
4. Press the MIX button g for mix (fade) effect.
5. Press the START button •• to start Auto wipe or fade
effect.
L-KEY 1/2
SCAN
B-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
VIDEO
MAX
TIME
CMX-12
VIDEO EFFECTS MIXER
AUDIO FOLLOW
FUNCTIONS
ONE-WAY
INPUT B CMX-12AUX
MIC
VIDEO EFFECTS MIXER
INPUT A
TIME
REVERSE
MAX
MAX
MAX
MODE
FUNCTIONS
CONTROL
MULTI
WIPE
ONE-WAY
3
A
MIN
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
MAX
ON
1/2
BACK
COLOR
1
POSITION
MIN
1/4
1/3
4•
MIX 1/2
4
POSITION
1/2
MIN
1/3
A SOURCE
EDGE1/2
2
START
B-KEY 1/2
VIDEO SOURCE SELECT
KEY 1/3
MIN
MIN
B SOURCE
COLOR1/3
MIN
B-KEY 1/2
VIDEO SOURCE SELECT
G.DIGITAL EFFECT
Digital effect section which generates digital special
n
effects for the A bus and B-bus source video signals.
The selected effect(s) can be added to either the
A-bus or B-bus at one time.
The mosaic effects is not available in sub-picture under
n
PIP mode.
l••. A-bus, B-bus digital effect ON button.
⑲•$. STILL button.
⑳•%. PAINT button - 3 steps.
•••^. NEGATIVE button.
•••&. MOSAIC button - 3 steps.
1/4
MIN
L-KEY 1/2
AUDIO
LEVEL
1/4
⑭
1/4
5)
5
L-KEY 1/2
MULTI
⑫
MAX
A SOURCE
B SOURCE
AUTO / WIPE
B
MAX
PIP
REVERSE
VIDEO/AUDIO MIXE
-15
-10
-5
-3
-1
0
+1
+2
-15
-10
-5
-3
-1
0
+1
+2
VIDEO
+3 +4
L
MAX
R
+3
+4
CMX-12
VIDEO EFFECTS MIXER
FUNCTIONS
TIME
ONE-WAY
MIN
MAX
REVERSE
1/2
MULTI
1/3
WIPE
HDMI 1
1/4
PIP
HDMI 2
MIX
A SOURCE
1/3
MULTI 1/2
L-KEY
B-KEY 1/2
FUNCTIONS
ONE-WAY
1/4
-15
KEY
EDGE
MODE CONTROL
REVERSE
WIPE
1/2
1/3
1/4
MIX
KEY
-5
-3
-1
0
B
+1
+2
+3
+4
DB
STILL
-10
-5
-3
PAINT
-1
0
+1
•#
•$
•%
NEGATIVE
+2
+3
•^
•&
ADJUST
ADJUST
INPUT B
1/3
1/4
A
EDGE
AUDIO FOLLOW
PAINT
NEGATIVE
MAX
MAX
HDMI 2
B-KEY 1/2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
VIDEO/AUDIO MIXER
B
SCAN
ON
BACK
COLOR
MAX
MIN
AUDIO FOLLOW
AUTO / WIPE
INPUT A
MAX
INPUT B
MAX
AUX
MAX
MIN
MIC
MIN
MAX
START
A
ON
HD INPUT 1
MAX
MOSAIC
B
COLOR
VIDEO
HDMI 2
AUX
DEMO
B SOURCE
VIDEO SOURCE SELECT
HDMI 1
MIN
MOSAIC
DB
+4
INPUT A
A
MAX
STILL
H. AUDIO MIXER
Audio can be processed either
n
separately or in combination with a
video source.
4*
4*. When the AUDIO FOLLOW's LED
illuminate the Audio may be adjust
4(
by Video slider 4• along with the video.
When the LED is off the Audio will be
5)
adjusted by 5! & 5@.
5!. Adjust A-bus's audio level.
4&
5@. Adjust B-bus's audio level.
5#. AUX: Controls the audio level of the auxiliary input.
5$. MIC: Controls the audio level of the microphone input.
HDMI 1
L-KEY 1/2
••
VIDEO/AUDIO MIXER
POSITION
1/2
2•
SD INPUT 1
B
ON
A SOURCE
-10
ON
-15
VIDEO
MAX
HD INPUT 2
A
L
R
DIGITAL EFFECTS
PIP
BACK
HD INPUT 1
COLOR
⑳
COLOR
VIDEO SOURCE SELECT
MIN
⑲
B
B SOURCE
1/2
A
SD INPUT
HDMI
1 1 SD INPUT
HDMI
2 2
HD INPUT 2
⑱
AUDIO
LEVEL
CMX-12
VIDEO EFFECTS MIXER
A
DIGITAL EFFECTS
HD INPUT 1
POSITION
TIME
A
MODE CONTROL
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
B
MIN
START
18
MIN
5!
MIN
5@
MIN
5#
MIN
5$
MIN
I. OSD ADJUST
2*. When turn off the OSD adjust in SD PREVIEW, output will show A/B-bus and
output system information. As shown below.
-15
AUDIO
LEVEL
-10
-5
-3
-1
0
+1
+2
+3
+4
L
DB
R
DB
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
CMX-12
VIDEO EFFECTS MIXER
INFORMATION
FUNCTIONS
ONE-WAY
X
1/2
REVERSE
MULTI
A INPUT:HDMI 1
SYSTEM:1080I60
1/3
1/4
B INPUT:Y PB PR 1
A SOURCE
B SOURCE
SYSTEM:480P60
1/2
1/3
1/4
MODE CONTROL
WIPE
DIGITAL EFFECTS
PIP
⑱
ADJUST
⑲
⑳
2•
••
2*
A
MIX
KEY
DEMO
ON
EDGE
STILL
PAINT
NEGATIVE
MOSAIC
•)
B
COLOR
OUTPUT:NTSC
L-KEY 1/2
ADJUST
•#
•$
•%
SCAN
•^
•&
3)
B-KEY 1/2
2*. When turn ON the function in SD PREVIEW, output will show the adjust screen.
As shown below.
nWhen in MENU mode, press ⑲ t ⑳ u to adjust the
MENU [1][2][3]
page. Press 2! q qand 2@ p pto select the
A PICTURE
functions; once the functions are selected press
⑲ t tand ⑳ u uto adjust the value.
CONTRAST
[ 58]
BRIGHT
[ 31]
nAbove values are not save to EEPROM. When the
COLOR
[ 31]
device is turn off the system will change the
HUE
[ 31]
DETAIL
[ 10]
value back to previouse value.
ASPECT
[FULL]
Press 2* ADJUST to exit the OSD adjust screen
and the system will automatically save to the
systerm.
OSD adjustment function and range setting as below diagram:
n
URCE SELECT
VIDEO/AUDIO MIXER
VIDEO
INPUT A
MAX
AUDIO FOLLOW
INPUT B
AUX
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
A
ON
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK
COLOR
AUTO / WIPE
B
MIN
START
[1]A PICTURE
MENU
[2]B PICTURE
[3]SETUP
CONTRST
BRIGHT
COLOR
HUE
DETAIL
ASPECT
[ 58]
[ 31]
[ 31]
[ 31]
[ 10]
[FULL]
0~63
0~63
0~63
0~63
0~63
AUTO FULL 16:9 4:3
CONTRST
BRIGHT
COLOR
HUE
DETAIL
ASPECT
[ 58]
[ 31]
[ 31]
[ 31]
[ 10]
[FULL]
0~63
0~63
0~63
0~63
0~63
AUTO FULL 16:9 4:3
A AUDIO
B AUDIO
VOLUME
LIP SYNC
OUTPUT
DEFAULT
[AUTO]
[AUTO]
[ 127]
[ 33MS]
[NTSC]
AUTO-CH1-CH2-CH3-CH4-CH5-CH6
AUTO-CH1-CH2-CH3-CH4-CH5-CH6
0~127
0~170
NTSC-NTSC 43-PAL-PAL M-PAL N
SECAM-480P60-576P50-720P50720P60-1080I50-1080I60
19
5. Connector and Installation
HD Y PB PR 1
HD AUDIO INPUT
R1
L1
R2
Other
Audio
Source
HD Y PB PR 2
SD AUDIO INPUT
L2
R1
Y
HD INPUT 1
Pb
L1
R2
Pr
AUX INPUT
L2
R
SD INPUT 1
V
L1
R2
L2
Pr
SD PREVIEW
V
S
DC INPUT
12V 3.0A
HDMI OUTPUT
HDMI 2
Y
HDMI 1
AUDIO OUTPUT
R1
HD OUTPUT 1
Y
Pb
S
HDMI INPUT
HDMI 1
L
Pb
HD INPUT 2
HDMI 2
Pr
V
SD INPUT 2
S
SD 1
Y
Pb
HD OUTPUT 2
SD 2
TV
Pr
V
SD OUTPUT
S
VCR
or TV
MONITOR
The output can select HD or SD system. Users can use SD PREVIEW to adjust
n
the output system, or a fast way to switch is to press two keys for 1 second in
the same time.
The combination as below:
2( butten+ 4% butten → 480P60
3) butten+ 4% butten → 576P60
3! butten+ 4% butten → 720P50
3@ butten+ 4% butten → 720P60
3# butten+ 4% butten → 1080I50
3$ butten+ 4% butten → 1080I60
3% butten+ 4% butten → NTSC
3^ butten+ 4% butten → NTSC 43
3& butten+ 4% butten → PAL
3* butten+ 4% butten → PAL M
3( butten+ 4% butten → PAL N
4) butten+ 4% butten → SECAM
20
6. Specifications
Source Input
X 6(SOURCE 1/6)
HDMI Input: x2
Digital Video YUV(480i/p,576i/p,720p50/60,1080i50/60, 1080p50/60).
Component Input: x2
Analog Video YUV(480i/p,576i/p,720p50/60,1080i50/60).
Y/C input: x2
Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
Video input: x2
1.0 Vp-p 75Ω composite signal, Pin-Jack
(NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM)
Audio input: x4
-6 dBs/20 kΩ Pin Jack (L/R).
External Sound Input
MIC input: x 1 (MIC); -60 dBv/600Ω
AUX input: x 1 (AUX); -6 dBs/20 kΩ, Pin Jacks(L/R)
Recording Output
HDMI Output: x1
Digital Video YUV(480i/p,576i/p,720p50/60,1080i50/60).
Component Output: x2
Analog Video YUV(480i/p,576i/p,720p50/60,1080i50/60).
Y/C Output: x1
Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
Video Output: x1
1.0 Vp-p 75Ω composite signal, Pin-Jack
(NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM)
Audio Output: x2
-6 dBs/20 kΩ Pin Jack (L/R).
Preview Output(OSD)
Y/C Output: x1
Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
Video Output: x1
1.0 Vp-p 75Ω composite signal, Pin-Jack
(NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM)
Headphone Output
x 1 (Headphone); -20 dBv~ -80 dBv, 8Ωunbalance, phone-5 jack
Effects
Video:
Still, Mosaic, Paint, Negative, Wipe, Mix, Fade,
Picture-In-Picture, Chroma key, Luminance key
Back Color x3
Wipe Patterns
S/N (Typical)
Power Source
Power Consumption
Dimensions
Weight
White, Yellow, Cyan, Green, Magenta, Red, Blue, Black
96 patterns
video: 48 dB (composite), 50 dB (HDMI,Component,Y/C) Audio: 60 dB
12V DC 3A
Approx. 15W
267(W) x 370(D) x 103.5(H) mm
2Kgs
21
A
Acronyms
Acronym
Complete Term
22
Meicheng Audio Video Co., Ltd.
Address: 13F., No.2, Jian 8th Rd., Jhonghe Dist., New Taipei City 235, Taiwan
TEL: 886-2-82280311 FAX: 886-2-82280319
E-mail: mei.cheng@msa.hinet.net
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising