CD10Fe COMPRESSION DRIVER KEY FEATURES 1 in. (25mm) high frequency compression driver 109 dB, 2.83V@1m sensitivity Improved moving assembly mechanical coupling for excellent power handling capabilities PM-4 polymer diaphragm with higher surface tension energy Ultra lightweight edgewound aluminium ribbon voice coil Aluminum cover Ferrite magnet TECHNICAL SPECIFICATIONS Throat diameter Rated impedance Minimum impedance D.C. Resistance Power capacity * Program power Sensitivity ** Frequency range Recommended crossover Voice coil diameter Magnetic assembly weight Flux density BL factor 25 mm. 1 in. 8 ohms. 5 ohms. 4.3 ohms. 70 w AES above 1.2 kHz 140 w above 1.2 kHz 109 dB 2.83V @ 1m coupled to TD-164 prototype horn 0.7 - 19 kHz 1.2 kHz or higher (12 dB/oct. min.) 44.4 mm. 1.75 in. 1.2 kg. 2.64 lb. 1.65 T 6.6 N/A DIMENSION DRAWINGS MOUNTING INFORMATION Overall diameter Depth Mounting Net weight Shipping weight 100 mm. 3,94 in. 62 mm. 2.44 in. Three M5 threaded holes, 120º apart on 57 mm. (2.24 in.) diameter circle. Two M5 threaded holes, 180º apart on 76.2 mm. (3 in.) diameter circle. 1.3 kg. 2.86 lb. 1.4 kg. 3.1 lb. Notes: *The power capacity is determined according to AES2-1984 (r2003) standard. Program power is defined as the transducer’s ability to handle normal music program material. **Sensitivity was measured at 1 m distance, on axis, with 2.83V input, averaged in the range 1-7 kHz. FREQUENCY RESPONSE FREE AIR IMPEDANCE CURVE Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain) · Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: firstname.lastname@example.org · 129 Note: on axis frequency response measured coupled to TD-164 horn in anechoic chamber, 2.83V @ 1m.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project