Illusion Split System
Illusion Split System
50 Hz/R410A
Range:1-5 Tons
Indoor Units
MCDA18DB
MCDA24DB
MCDA30DB
MCDA36DB
MCDB42DB
MCDB48DB
MCDB60DB
Outdoor Units
4TTB3018AA
4TTB3024AA
4TTB3030AA
4TTB3036AA
4TTA3030AD
4TTA3036AD
4TTA3042AD
4TTA3048AD
4TTA3060AD
XXX-XXXXXX-XX
Contents
3
Features and Benefits
Outdoor unit 4TTB
• Scroll compressor
• Efficiency up to 13 S E E R
• All aluminum SPINE FIN ™ coil
• WEATHERGUARD™ fasteners
• QUICK-SESS ™ cabinet, service
access and refrigerant connections
with full coil protection
• DURATUFF ™ base, fast complete
drain, weatherproof
• COMFORT-R ™ mode approved
• Glossy corrosion resistant finish
• Internal compressor high/low
pressure & temperature protection
• Liquidline filter supplied for field
installations
• Polyslategray cabinet with anthracite
gray badge and cap
• High pressure control
• Low pressure control
• Sump Heater/Crankcase Heater
• Service valve cover
• R-410A refrigerant
• S.E.E.T. design testing
• 100% line run test
• Low ambient cooling to 30°F with
AY28X079
• Low ambient cooling to 55°F as
shipped
Outdoor unit 4TTA
• Scroll compressor
• Efficiency up to 13 S E E R
• All aluminum SPINE FIN ™ coil
• WEATHERGUARD™ fasteners
• QUICK-SESS ™ cabinet, service
access and refrigerant connections
with full coil protection
• DURATUFF ™ base, fast complete
drain, weatherproof
• COMFORT-R ™ mode approved
• Glossy corrosion resistant finish
• Internal compressor high/low
pressure & temperature protection
• Liquidline filter supplied for field
installations
• Polyslate gray cabinet with anthracite
gray badge and cap
• High pressure control
• Low pressure control
• Sump Heater/Crankase Heater
• Service valve cover
• R-410A refrigerant
• S.E.E.T. design testing
• 100% line run test
• Low ambient cooling to 30°F with
AY28X079
• Low ambient cooling to 55°F as
shipped
Features and Benefits
MCD Concealed Unit
Features:
• Compact Design
• Triple Layer Drain Pan*
• 4 Speed Fan Motor
• Optional Electric Heater
Benefits:
• Flexibility in installation locations.
• Protect against condensate leaks.
• Flexibility in airflow.
• Whisper quiet operation.
• Ease of installation
MCD Air Handler unit
• Complete family of concealed models- available
in capacities ranging from 12,000 to 60,000 Btu/h.
• Compact height- only 258 mm.
for 12,000 to 36,000 Btu/h models- the MCD
Series is very compact for easy installation into
tight ceiling locations.
• Triple protection drain pan of three layers
provide maximum insulation and water integrity.
First, a single piece of galvanized steel; next,
a single piece of polystyrene; and finally,
a vacuum formed plastic liner.
Triple protection drain pan
A Plastic
B Polystyrene foam
C Galvanized sheet
• Effectively prevents ceiling damage from
drain pan leaks
• Decreases chance of mold
• Enhances indoor air quality
A
B
C
Illusion drain pans consist of three layers: a
single piece of galvanized sheet, a single piece
of polystyrene foam, and a vacuum formed
plastic liner. It also features a high-quality,
flexible drain hose which is suitable for PVC
size.
5
5
Features and Benefits
Fan speed:
Four fan levels provide continuous, cool
airflow
Temperature setting:
Set temperature range is from 15 ℃ to 30 ℃.
Touch wired control
(ACYSTAT160AA cooling only)
(ACYSTAT260AA cool and heat)
Powercool (turbo) mode:
Cool off quicker (Turbo mode for LCD wired
control)
LCD wireless
remote control
Sleep mode:
Stay comfortable with automatic room
temperature adjustment during the night
Receiver
Econo mode:
Save energy while keeping cool
LCD wired control
(ACYSTAT110AA cooling only)
(ACYSTAT210AA cool and heat)
Dry mode:
provides effective humidity reduction with
high efficient cooling capacity.
Receiver
24 hours programmable timer:
Select on/off times to schedule even more
energy and cost savings
LCD wireless
remote control
(ACYSTAT120AA cooling only)
(ACYSTAT220AA cool and heat)
6
(ACYSTAT170AA Cooling Only)
(ACYSTAT270AA Cool & Heat)
Digital touch-control
series
• Choose from wired or
wireless control
• Touch-control switch
• Intelligent features add
more convenience
Nomenclature
Outdoor Units
4 T T B 3 0 3 6 A A 0 0 0 A A
Outdoor Units
Refrigerant Type
2 = R-22
4 = R-410A
Refrigerant Type
2 = R-22
4 = R-410A
TRANE
TRANE
Product Type
W = Split Heat Pump
T = Split Cooling
Product Type
W = Split Heat Pump
T = Split Cooling
Product Family
Z = Leadership – Two Stage
X = Leadership
R = Replacement/Retail
B = Basic
A = Light Commercial
Product Family
Z = Leadership – Two Stage
X = Leadership
R = Replacement/Retail
B = Basic
A = Light Commercial
Family SEER
0 = 10
3 = 13
1 = 11
4 = 14
2 = 12
5 = 15
Family SEER
0 = 10
3 = 13
1 = 11
4 = 14
2 = 12
5 = 15
6 = 16
8 = 18
9 = 19
6 = 16
8 = 18
9 = 19
Split System Connections 1-6 Tons
0 = Brazed
Split System Connections 1-6 Tons
0 = Brazed
Nominal Capacity in 000s of BTUs
Nominal Capacity in 000s of BTUs
Major Design Modifications
Major Design Modifications
Power Supply
A = 220-240/1/50
D = 380-415/3/50
Power Supply
A = 220-240/1/50
D = 380-415/3/50
Secondary Function
Secondary Function
Minor Design Modifications
Minor Design Modifications
Unit Parts Identifier
Unit Parts Identifier
7
4 T T A 3 0 3 6 A D 0 0 0 A A
Model Nomenclature
M
1
C
2
D
3
A
4
1
5
2
6
D
7
B
8
P
9
H
10
A
11
A
12
Digit 1
Digit 9– Electric Heatand Refrigerant
M = Mini-split
0 = no heat, no return plenum, standard option
Digit 2
5 = no heat, Egat no.5, standard option
C = 1.0 KW electric heat, no return plenum
C = Cooling only
D = 1.5 KW electric heat, no return plenum
Digit 3
E = 2.0 KW electric heat, no return plenum
D = Concealed
F = 2.5 KW electric heat, no return plenum
Digit 4– Refrigerant Connection
G = 3.0 KW electric heat, no return plenum
0 = Sweat type, R22
H = 4.0 KW electric heat, no return plenum
5 = Flare type, R22
I = 4.5 KW electric heat, no return plenum
A = Flare type, R410A (12-36)
P = no heat, with return plenum
B = Sweat type, R410A (48-60)
Q = 1.0 KW electric heat, with return plenum
C = Flare type, R407C
R = 1.5 KW electric heat, with return plenum
D = Sweat type, R407C
S = 2.0 KW electric heat, with return plenum
Digit 5, 6 – Nominal Capacity
T = 2.5 KW electric heat, with return plenum
12 = 12 MBH
U = 3.0 KW electric heat, with return plenum
18 = 18 MBH
V = 4.0 KW electric heat, with return plenum
24 = 24 MBH
W = 4.5 KW electric heat, with return plenum
30 = 30 MBH
Digit 10 – Option
36 = 36 MBH
0 = No option
48 = 48 MBH
H = High Efficiency with Filter
60 = 60 MBH
Digit 11
Digit 7
A = Design change
D = High external static pressure
E = Low external static pressure
Digit 8 – Voltage
B = 220 -240/50/1
D = 380 -415/50/3
8
Digit 12
A = Service part
General Data
Product
Model No. 1
Electrical Data V/Ph/Hz 2
Min Cir Ampacity
Max Fuse Size (Amps)
Compressors
N0. Used - No. Stages
RL AMPS - LR AMPS
Outdoor Fan FL Amps
Fan HP
Fan Dia (inches)
Coil
Refrigerant R-410A
Line Size - (in.) O.D. Gas 3
Line Size - (in.) O.D. Liquid 3
Dimensions HxWxD(crated)(in.)
Weight - Shipping (Kgs)
Weight - Net (Kgs)
Start Components
Sound Enclosure
Compressor Sump Heat/CrankCase
Heater
4TTB3030AA
220/240/1/50
23
40
SCROLL
NO
NO
YES
1-1
15-67
1.2
1/5
27.6
Spine Fin™
7/0-LB/OZ
3/4
3/8
42.4 x 35.1 x 38.7
224
189
NO
NO
YES
4TTB3036AA
220/240/1/50
26
46
SCROLL
1-1
17.9-87
1.2
1/5
27.6
Spine Fin™
7/7-LB/OZ
7/8
3/8
42.4 x 35.1 x 38.7
265
230
NO
NO
YES
4TTB3024AA
4TTB3018AA
220/240/1/50
15
25
SCROLL
1-1
10-52
1.4
1/ 6
23
Spine Fin™
5/9-LB/OZ
3/4
3/8
34 x 30.1 x 33
165
138
NO
NO
YES
220/240/1/50
17
30
SCROLL
1-1
12.1-60
1.4
1/6
23
Spine Fin™
5/7-LB/OZ
3/4
3/8
34 x 30.1 x 33
167
140
Optional Accessories: 4
Anti-short cycle Timer
Evaporator Defrost Control A/C
Rubber Isolator Kit
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
Extreme Condition Mounting Kit
Snow Leg - Base & Cap 4" High
Snow Leg - 4”Extension
Seacoast Kit
Refrigerant Lineset
BAYECMT023
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN7*
BAYECMT023
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN7*
BAYECMT004
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN7*
BAYECMT004
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN *
3 Standard line lengths - 80'. Standard lift - 60' Suction and Liquid line.
For Greater lengths and lifts refer to refrigerant piping software Pub# 32-3312-0
latest revision)
4 For accessory description and usage, see pages 11.
2 Calculated in accordance with N.E.C. Only use HACR circuit breakers or fuses.
A-Weighted Sound Pressure Level [dB(A)]
MODEL
SOUND POWER
LEVEL [dB(A)]
4TTB 018
57
4TTB 024
4TTB 030
61
44
4TTB 036
9
A_WEIGHTED
FULL OVTAVE SOUND POWER
63
125
250
39
46
46
50
47
43
39
33
46
7
42
48
50
49
46
40
36
9
6
1
2 Tested as per JIS C9612-1994.
9
500
1000
LEVEL dB - [dB(A)]
2000
4000
8
8000
General Data
Product
Model No. 1
4TTA3030AD
Electrical Data V/Ph/Hz 2
380-415/3/50
Min Cir Ampacity
9
15
Max Fuse Size (Amps)
Compressors
SCROLL
N0. Used - No. Stages
1-1
RL AMPS - LR AMPS
6.1 - 38
Outdoor Fan FL Amps
0.7
Fan HP
1-1/6
Fan Dia (inches)
27.6 - 1
Coil
Spine Fin™
Refrigerant R-410A
7/7 LB/OZ
Line Size - (in.) O.D. Gas 3
3/4
Line Size - (in.) O.D. Liquid 3
3/8
Dimensions HxWxD(crated)(in.)
42.4 x 35.1 x 38.7
Weight - Shipping (Lbs)
217
Weight - Net (Lbs)
182
Start Components
NO
Sound Enclosure
NO
Compressor Sump Heat/CrankCase
YES
Heater
4TTA3048AD
380-415/3/50
12
21
SCROLL
4TTA3060AD
380-415/3/50
14
25
SCROLL
1-1
7.6 - 51.5
0.7
1-1/6
27.6 - 1
Spine Fin™
9/8 LB/OZ
7/8
3/8
51 x 35.1 x 38.7
292
255
1-1
8.9 - 67.1
0.7
1-1/6
27.6 - 1
Spine Fin™
9/14 LB/OZ
7/8
3/8
51 x 35.1 x 38.7
297
260
NO
NO
YES
1-1
6.9 - 52
0.7
1-1/6
27.6 - 1
Spine Fin™
8/4 LB/OZ
7/8
3/8
46.4 x 35.1 x 38.7
277
240
NO
NO
YES
NO
NO
YES
NO
NO
YES
4TTA3036AD
380-415/3/50
11
19
SCROLL
4TTA3042AD
380-415/3/50
12
21
SCROLL
1-1
6.7 - 43
0.7
1-1/6
27.6 - 1
Spine Fin™
8/5 LB/OZ
7/8
3/8
42.4 x 35.1 x 38.7
254
219
Optional Accessories:
Anti-short cycle Timer
Evaporator Defrost Control A/C
Rubber Isolator Kit
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
TAYASCT501A
AY28X079
BAYISLT101
Extreme Condition Mounting Kit
Snow Leg - Base & Cap 4" High
Snow Leg - 4”Extension
Seacoast Kit
Refrigerant Lineset
BAYECMT023
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN7*
BAYECMT023
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN4*
BAYECMT004
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN4*
BAYECMT004
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN4 *
BAYECMT004
BAYLEGS002
BAYLEGS003
BAYSEAC001
TAYREFLN4 *
3 Standard line lengths - 80'. Standard lift - 60' Suction and Liquid line.
For Greater lengths and lifts refer to refrigerant piping software Pub# 32-3312-0
latest revision)
4 For accessory description and usage, see pages 11.
2 Calculated in accordance with N.E.C. Only use HACR circuit breakers or fuses.
A-Weighted Sound Pressure Level [dB(A)]
MODEL
SOUND POWER
LEVEL [dB(A)]
A_WEIGHTED
FULL OVTAVE SOUND POWER
LEVEL dB - [dB(A)]
63
125
250
500
1000
2000
4000
65
51
52
55
49
42
49
47
42
52
46
52
51
50
51
52
52
54
52
52
51
43
48
46
48
38
46
40
42
33
41
36
49
59.3
25.8
30.8
39.2
47.2
48.4
46.4
44.1
34.8
4TTA3030AD
60
4TTA3036AD
4TTB3042AD
61
70
4TTA3048AD
4TTA3060AD
2 Tested as per JIS C9612-1994.
10
8000
General Data 4TTA/4TTB
Accessory Description and Usage
AHRI Standard Capacity Rating Conditions
Anti-Short Cycle Timer - Solid state timing device that
prevents compressor recycling until 5 minutes have
elapsed after satisfying call or power interruptions. Use
in area with questionable power delivery, commercial
applications, long lineset, etc.
AHRI STANDARD 210/240 RATING CONDITIONS —
(A) Cooling 80°F DB, 67°F WB air entering
indoor coil, 95°F DB air entering outdoor coil.
Evaporator Defrost Control — SPST Temperature actuated
switch that cycles the condeser off as indoor coil reaches
freeze-up conditions. Used for low ambient cooling to
30°F with TXV.
Rubber Isolators — 5 large rubber donuts to isolate
condensing unit from transmitting energy into mounting
frame or pad. Use on any application where sound
transmission needs to be minimized.
Extreme Condition Mount Kit — Bracket kits to securely
mount condensing unit to a frame or pad without
removing any panels. Use in areas with high winds, or
on commercial roof tops, etc.
11
General Data/MCD 50 Hz
UNIT MODELS
MCDA18DBPHAA
MCDA24DBPHAA
MCDA30DBPHAA
MCDA36DBPHAA
V/ph/Hz
A
MCDA18DBTHAA
220-240/1/50
1.0
MCDA24DBUHAA
220-240/1/50
1.4
MCDA30DBVHAA
MCDA36DBWHAA
3.9
2.9
in (mm)
in (mm)
R410A
Flare
3/4 (19.05)
3/8 (9.53)
R410A
Flare
3/4 (19.05)
3/8 (9.53)
R410A
Flare
3/4 (19.05)
3/8 (9.53)
R410A
Flare
7/8 (22.23)
3/8 (9.53)
Face Area
sq ft (m 2)
2.1 (0.20)
2.1 (0.20)
2.33 (0.216)
3.50 (0.33)
Coil Size (HxL)
Tube Size OD
Tube Type
Rows
Fin Type
Fins per inch
Refrigerant Flow Control
Drain Connection Size
in
8" x 38"
8" x 38"
8" x 42"
14" x 36"
3/8 (9.53)
3/8 (9.53)
3/8 (9.53)
3/8 (9.53)
Inn. Grv.
Inn. Grv.
Inn. Grv.
Plain
4
4
4
4
Precoated Slit
Precoated Slit
Precoated Slit
Precoated Slit
1
POWER CONNECTION
MCA
SYSTEM DATA
Refrigerant Type
Refrigerant Connection Type
Suction Line OD
Liquid line OD
CASING
Material
Color
Type of Insulation
COIL
1
in (mm)
in (mm)
ELECTRIC HEATER DATA (for electric heater option only)
Heater Rating
kW
Heater RLA
FAN
Fan Type
No. used
Diameter
in (mm)
Width
in (mm)
Drive Type
MOTOR
Motor Type
No. of Motor
Motor Model
Motor Power
kW
FILTER
rpm
Power Input
kW
Power Supply
RLA/LRA
V/ph/Hz
Type
No. used
Size (WxLxD)
CONTROL DEVICE
Anti-Recycle Time
Thermostat
DIMENSION (HxWxD)
Crated (Shipping)
20
20
20
16
Capillary Tube
Capillary Tube
Capillary Tube
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
2.5
11.4
3.0
13.6
4 (2 elements)
18.2
4.5 (2 elements)
20.5
Centrifugal
Centrifugal
Centrifugal
Centrifugal
2
6 (144.0)
7 (188.0)
Direct
2
7 (164)
8 (201)
Direct
2
8 (203.2)
9 (228.6)
Direct
2
8 (203.2)
9 (228.6)
Direct
1
1
1
1
KDE2G4016
KDE2G4018
8555NVA-A28S
T2-0014-B
0.087
0.128
0.399
0.210
4
4
4
4
1100/1200/1300/1400
1000/1100/1200/1400
850/1000/1100/1200
1000/900/800/700
0.237
0.684
0.454
220/1/50
1.09/3.16
220-240/1/50
3.11/4.91
220-240/1/50
2.29/3.15
in3
Aluminium Filter
2
10.5x20.0x1.0
Aluminium Filter
2
10.5x20.0x1.0
Aluminium Filter
2
13.7 x 21.8 x 1.0
Aluminium Filter
2
13.7 x 18.8 x 1.0
(mm3)
(267x510x25.4)
(267x510x25.4)
(350 x 556 x 25.4)
(350 x 478 x 25.4)
No
No
No
No
No
No
No
No
-
-
-
-
-
-
-
-
13.2 x 51.6 x 22.1
13.2 x 51.6 x 22.1
18.9 x 51.9 x 30.6
18.9 x 46.0 x 30.6
(335 x 1311 x 562)
(335 x 1311 x 562)
(479 x 1317 x 778)
(479 x 1168 x 778)
-
-
-
-
-
-
-
-
11.9 x 49.2 x 21.1
11.9 x 49.2 x 21.1
16 x 49.2 x 28.5
16 x 43.2 x 29.9
(304 x 1251 x 538)
(304 x 1251 x 538)
(408 x 1251 x 724)
(408 x 1098 x 759)
82 (37.2)
86 (39.2)
82 (37.2)
86 (39.2)
73 (32.73)
117 (51.3)
77 (34.73)
113 (53.3)
79 (35.8)
79 (35.8)
64 (29.09)
103 (46.8)
83 (37.8)
68 (31.09)
107 (48.8)
in3
in
in
3
3
3
3
(mm)3
Uncrated (Net)**
WEIGHT
in
3
(mm)
Crated (Shipping)
1
Crated (Shipping)
Uncrated (Net)
3
lb (kg)
lb (kg)
lb (kg)
83 (37.8)
Uncrated (Net)1
lb (kg)
MCA - Minimum Circuit Ampacity ; calculated as follow : 125 % of motor R.L.Amps
1
1
220-240/1/50
0.179
(mm)
Uncrated (Net)
220-240/1/50
220/1/50
0.82/1.86
(mm)
Crated (Shipping)**
1
Capillary Tube
No. of Speed
Motor Speed
1
Model with electric heater has alphabetic letter T or Z in the ninth digit.
General Data/MCD 50 Hz
UNIT MODELS
MCDB42DBPHAA
1
1
3.9
4.9
in (mm)
in (mm)
R410A
Sw eat
7/8 (22.23)
3/8 (9.53)
R410A
Sw eat
7/8 (22.23)
3/8 (9.53)
R410A
Sw eat
7/8 (22.23)
3/8 (9.53)
Face Area
sq ft (m 2)
3.50 (0.33)
3.50 (0.33)
3/8 (9.53)
Coil Size (HxL)
Tube Size OD
Tube Type
Rows
Fin Type
Fins per inch
Refrigerant Flow Control
Drain Connection Size
in
14" x 36"
14" x 42"
14" x 42"
in (mm)
3/8 (9.53)
3/8 (9.53)
3/8 (9.53)
Plain
Inn. Grv.
Inn. Grv.
4
4
Precoated Slit
Precoated Slit
4
Precoated Slit
1
in (mm)
Motor Model
Motor Power
kW
No. of Speed
Motor Speed
rpm
Power Input
kW
Power Supply
RLA/LRA
V/ph/Hz
Type
No. used
Size (WxLxD)
in3
(mm3)
CONTROL DEVICE
Anti-Recycle Time
Thermostat
DIMENSION (HxWxD)
Crated (Shipping)
in 3
(mm)
Crated (Shipping)**
in
Uncrated (Net)
in
3
3
(mm)
3
3
(mm)3
Uncrated (Net)**
in
3
(mm)
Crated (Shipping)
1
Crated (Shipping)
Uncrated (Net)
3
lb (kg)
lb (kg)
lb (kg)
Uncrated (Net)1
lb (kg)
MCA - Minimum Circuit Ampacity ; calculated as follow : 125 % of motor R.L.Amps
1
MCDB60DBPHAA
3.9
V/ph/Hz
A
ELECTRIC HEATER DATA (for electric heater option only)
Heater Rating
kW
Heater RLA
FAN
Fan Type
No. used
Diameter
in (mm)
Width
in (mm)
Drive Type
MOTOR
Motor Type
No. of Motor
WEIGHT
MCDB48DBPHAA
MCDB60DBZHAA
POWER CONNECTION
MCA
SYSTEM DATA
Refrigerant Type
Refrigerant Connection Type
Suction Line OD
Liquid line OD
CASING
Material
Color
Type of Insulation
COIL
FILTER
1
MCDB48DBYHAA1
Model with electric heater has alphabetic letter T or Z in the ninth digit.
MCDB42DBXHAA
220-240/1/50
220-240/1/50
220-240/1/50
18
15
Capillary Tube
Capillary Tube
20
Capillary Tube
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
5.5 (2 elements)
25.0
6 (2 elements)
27.2
7 (2 elements)
31.8
Centrifugal
Centrifugal
Centrifugal
2
8 (203.2)
9 (228.6)
Direct
2
8 (203.2)
9 (228.6)
Direct
2
8 (203.2)
9 (228.6)
Direct
1
1
1
8555NVA-A28S
8555NVA-A28S
8555NVA-A27S
0.399
0.399
0.450
4
4
4
850/1000/1100/1200
850/1000/1100/1200
850/970/1100/1250
0.684
0.684
0.881
220-240/1/50
3.11/4.91
220-240/1/50
3.11/4.91
220-240/1/50
3.94/7.15
Aluminium Filter
2
13.7 x 18.8 x 1.0
Aluminium Filter
2
13.7 x 21.8 x 1.0
Aluminium Filter
2
13.7 x 21.8 x 1.0
(350 x 478 x 25.4)
(350 x 556 x 25.4)
(350 x 556 x 25.4)
No
No
No
No
No
No
-
-
-
-
-
-
18.9 x 46.0 x 30.6
19.3 x 51.9 x 30.8
19.3 x 51.9 x 30.8
(479 x 1168 x 778)
(490 x 1317 x 782)
(490 x 1317 x 782)
-
-
-
-
-
-
16 x43.2 x 29.9
16 x 49.2 x 29.8
16 x 49.2 x 29.8
(408 x 1098 x 759)
(408 x 1251 x 759)
(408 x 1251 x 759)
117 (51.3)
140 (63.7)
140 (63.7)
113 (53.3)
147 (66.7)
103 (46.8)
130 (59)
147 (66.7)
130 (59)
107 (48.8)
137 (52)
137 (52)
Performance
Data
Fan coil Airflow (CFM) versus. External Static Pressure (in.wg)
Table 5 - Indoor Fan performance
SPEED
MCDA18DBPHAA
AIR FLOW (CFM)
260
300
340
380
420
460
500
540
580
600
LOW
0.16
0.13
0.09
0.05
0.00
MED
0.27
0.24
0.20
0.16
0.11
0.06
0.00
HIGH
0.31
0.28
0.24
0.20
0.15
0.10
0.05
0.00
EXTRAHIGH
0.35
0.33
0.30
0.26
0.22
0.17
0.12
0.07
0.03
0.00
700
740
780
820
SPEED
MCDA24DBPHAA
AIR FLOW (CFM)
460
500
540
580
LOW
0.22
0.16
0.09
0.00
MED
0.28
0.24
0.20
0.14
620
660
0.08
0.00
HIGH
0.33
0.30
0.27
0.23
0.19
0.15
0.10
0.05
0.00
EXTRAHIGH
0.38
0.35
0.32
0.29
0.25
0.21
0.17
0.12
0.07
0.00
1,000
1,060
1,120
1,180
SPEED
MCDA30DBPHAA
AIR FLOW (CFM)
640
700
760
820
880
940
LOW
0.30
0.28
0.23
0.17
0.11
0.05
0.00
MED
0.38
0.35
0.30
0.24
0.18
0.12
0.06
HIGH
0.42
0.39
0.34
0.28
0.22
0.17
0.11
0.05
0.00
EXTRAHIGH
0.46
0.44
0.40
0.35
0.29
0.23
0.17
0.11
0.05
0.00
900
980
1,060
1,140
1,220
0.08
0.00
0.07
0.00
SPEED
0.00
MCDA36DBPHAA
AIR FLOW (CFM)
500
580
660
740
820
LOW
0.26
0.22
0.15
0.08
0.00
MEDIUM
0.36
0.33
0.28
0.22
0.15
HIGHT
0.43
0.41
0.37
0.32
0.26
0.19
0.11
0.00
EXTRAHIGHT
0.55
0.52
0.49
0.45
0.40
0.33
0.24
0.15
14
Performance
Data
Fan coil Airflow (CFM) versus. External Static Pressure (in.wg)
Indoor Fan Performance Table
SPEED
LOW
MCDB42DBPHAA
AIR FLOW (CFM)
880
960
1,040
1,120
1,200
0.30
0.25
0.17
0.08
0.00
1,280
1,360
1,440
1,520
1,600
MEDIUM
0.42
0.38
0.33
0.27
0.18
0.09
0.00
HIGHT
0.48
0.45
0.41
0.36
0.30
0.22
0.14
0.06
0.00
EXTRAHIGHT
0.53
0.51
0.47
0.42
0.37
0.31
0.23
0.15
0.07
0.00
1,350
1,450
1,550
1,650
1,730
0.07
0.00
SPEED
MCDB48DBPHAA
AIR FLOW (CFM)
850
950
1,050
1,150
1,250
LOW
0.36
0.28
0.17
0.07
0.00
MED
0.46
0.43
0.36
0.26
0.16
HIGH
0.55
0.53
0.47
0.38
0.29
0.20
0.11
0.00
EXTRAHIGH
0.66
0.64
0.60
0.54
0.45
0.36
0.27
0.18
0.08
0.00
1,480
1,560
1,640
1,720
SPEED
LOW
MCDB60DBPHAA
AIR FLOW (CFM)
1,000
1,080
1,160
1,240
0.28
0.24
0.15
0.00
1,320
1,400
MED
0.35
0.33
0.31
0.27
0.20
0.11
0.00
HIGH
0.42
0.40
0.38
0.35
0.31
0.26
0.18
0.09
0.00
EXTRAHIGH
0.52
0.50
0.47
0.44
0.39
0.33
0.26
0.18
0.09
15
0.00
Fan Performance Data
MCDA18DBPHAA
0.40
0.35
ESP(in.w.g)
0.30
LOW
0.25
MED
0.20
HIGH
EXTRAHIGH
0.15
0.10
0.05
0.00
260
310
360
410
460
510
560
610
AIR FLOW (CFM)
MCDA24DBPHAA
0.40
0.35
ESP(in.w.g)
0.30
LOW
0.25
MED
0.20
HIGH
EXTRAHIGH
0.15
0.10
0.05
0.00
460
510
560
610
660
AIR FLOW (CFM)
16
710
760
810
860
Fan Performance Data
MCDA30DBPHAA
0.50
0.45
0.40
ESP(in.w.g)
0.35
LOW
0.30
MED
0.25
HIGH
0.20
EXTRAHIGH
0.15
0.10
0.05
0.00
640
740
840
940
1,040
1,140
AIR FLOW (CFM)
MCDB48DBPHAA
0.70
0.60
ESP(in.w.g)
0.50
LOW
MED
0.40
HIGH
0.30
EXTRAHIGH
0.20
0.10
0.00
850
950
1,050
1,150
1,250
1,350
AIR FLOW (CFM)
17
1,450
1,550
1,650
1,750
Fan Performance Data
MCDB42DBPHAA
0.60
ESP(in.w.g)
0.50
0.40
LOW
0.30
MEDIUM
HIGHT
0.20
EXTRAHIGHT
0.10
0.00
880
980
1,080
1,180
1,280
1,380
1,480
1,580
1,680
AIR FLOW (CFM)
MCDB48DBPHAA
0.70
0.60
ESP(in.w.g)
0.50
LOW
MED
0.40
HIGH
0.30
EXTRAHIGH
0.20
0.10
0.00
850
950
1,050
1,150
1,250
1,350
AIR FLOW (CFM)
18
1,450
1,550
1,650
1,750
Fan Performance Data
MCDB60DBPHAA
0.60
ESP(in.w.g)
0.50
LOW
0.40
MED
0.30
HIGH
EXTRAHIGH
0.20
0.10
0.00
1,000
1,100
1,200
1,300
1,400
AIR FLOW (CFM)
19
1,500
1,600
1,700
1,800
Performance Data
Cooling
4TTB3018AA WITH MCDA18 AT 510 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
I.D.W.B.
85
59
TOTAL
CAPACITY
16.41
SENSIBLE CAPACITY
SYSTEM
72
75
78
80
kW
12.98
14.39
15.75
16.38
1.459
85
63
17.44
10.82
12.32
13.90
14.84
1.460
85
67
19.10
8.78
10.28
11.76
12.72
1.462
95
59
15.70
12.51
13.91
15.18
15.70
1.622
95
63
16.51
10.39
11.96
13.44
14.38
1.625
95
67
18.98
8.77
10.34
11.89
12.94
1.635
105
63
15.51
10.03
11.50
12.94
13.85
1.808
105
67
16.90
7.87
9.35
10.86
11.85
1.814
105
71
18.21
5.77
7.30
8.76
9.74
1.815
115
63
14.38
9.59
10.99
12.47
13.48
2.013
115
67
15.55
7.37
8.91
10.47
11.43
2.025
115
71
16.97
5.32
6.80
8.30
9.29
2.030
118.4
67
15.07
7.24
8.77
10.31
11.23
2.119
120
63
13.86
9.26
10.72
12.23
13.22
2.127
120
67
14.90
7.14
8.73
10.19
11.14
2.132
120
71
16.35
5.04
6.55
8.04
9.06
2.142
125
63
13.32
9.00
10.50
12.06
12.90
2.247
125
67
14.40
6.95
8.46
9.93
10.89
2.254
125
71
15.71
4.79
6.35
7.82
8.73
2.262
125.6
67
14.30
6.92
8.46
9.89
10.85
2.269
67
18.98
IDDB=
80.00
12.94
*** 95
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 18,980 BTUH
AIRFLOW = 510 CFM
COMPRESSOR POWER = 1,256 WATTS
I.D. FAN POWER = 185 WATTS
O.D. FAN POWER = 194 WATTS
COP = 3.4
E.E.R. = 11.61 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
425
575
TOTALCAP.
x 0.96
x 1.025
.
SENS.
CAP
x 0.91
x 1.065
COMPRESSOR KW
x 0.998
x 1.001
Rated with 25 Feet 3/4 suction 3/8 liquid lines
1.635
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
4TTB3024AA WITH MCDA24 AT 750 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
I.D.W.B.
TOTAL
CAPACITY
SYSTEM
SENSIBLE CAPACITY
72
75
78
80
kW
85
59
20.84
16.63
18.39
20.22
20.84
1.776
85
63
22.10
14.02
15.88
17.77
19.01
1.782
85
67
24.07
11.19
13.10
15.06
16.34
1.789
95
59
19.89
16.00
17.85
19.42
19.89
1.950
95
63
20.86
13.50
15.34
17.23
18.39
1.956
95
67
24.03
11.40
13.50
15.55
16.82
1.966
105
63
19.52
12.96
14.82
16.58
17.81
2.152
105
67
21.15
10.26
12.19
14.05
15.32
2.162
105
71
22.81
7.40
9.31
11.25
12.56
2.171
115
63
18.15
12.34
14.17
15.99
17.23
2.374
115
67
19.40
9.74
11.64
13.49
14.71
2.385
115
71
21.29
6.87
8.87
10.83
12.09
2.396
118.4
67
18.76
9.54
11.43
13.25
14.52
2.467
120
63
17.41
11.95
13.76
15.69
16.86
2.494
120
67
18.50
9.45
11.30
13.16
14.39
2.507
120
71
20.48
6.60
8.66
10.56
11.81
2.518
125
63
16.69
11.58
13.51
15.32
16.49
2.623
125
67
17.80
9.13
11.00
12.82
13.98
2.635
125
71
19.64
6.44
8.39
10.27
11.54
2.647
125.6
67
17.70
9.10
10.94
12.75
13.92
2.651
67
24.03
IDDB=
80.00
16.82
*** 95
1.966
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
.
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
20
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 24,037 BTUH
AIRFLOW = 750 CFM
COMPRESSOR POWER = 1494 WATTS
I.D. FAN POWER = 258 WATTS
O.D. FAN POWER = 214 WATTS
COP = 3.58
E.E.R. = 12.2 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
675
825
TOTALCAP.
x 0.96
x 1.03
.
SENS.
CAP
x 0.92
x 1.09
COMPRESSOR KW
x 0.99
x 1.01
Rated with 25 Feet 3/4 suction 3/8 liquid lines
Performance Data
Cooling
4TTB3030AA WITH MCDA30 AT 980 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
I.D.W.B.
TOTAL
CAPACITY
SYSTEM
SENSIBLE CAPACITY
72
75
78
80
kW
85
59
25.88
22.48
25.31
26.21
26.82
2.099
85
63
27.04
18.00
21.17
24.31
26.29
2.100
85
67
28.53
13.67
16.54
19.67
21.72
2.110
95
59
25.00
22.00
24.14
25.08
25.68
2.333
95
63
25.76
17.48
20.59
23.68
25.66
2.334
95
67
28.10
13.55
16.65
19.85
21.99
2.344
105
63
24.47
16.93
19.98
23.16
24.47
2.597
105
67
25.60
12.53
15.29
18.61
20.58
2.605
105
71
27.22
7.34
10.87
13.81
16.10
2.620
115
63
23.14
16.30
19.42
22.52
23.14
2.896
115
67
23.95
11.94
14.72
17.82
20.06
2.903
115
71
25.22
6.89
10.06
13.20
15.33
2.914
118.4
67
23.38
11.41
14.53
17.63
19.83
3.013
120
63
22.45
15.81
19.15
21.87
22.45
3.061
120
67
23.10
11.31
14.44
17.50
19.63
3.065
120
71
24.35
6.58
9.86
12.88
15.29
3.079
125
63
21.70
15.49
18.83
21.12
21.70
3.239
125
67
22.23
10.99
14.14
17.38
19.53
3.242
125
71
23.41
6.37
9.58
12.67
14.74
3.252
125.6
67
22.10
10.93
14.10
17.37
19.41
3.263
67
28.10
IDDB=
80.00
21.99
*** 95
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 28,100 BTUH
AIRFLOW = 980 CFM
COMPRESSOR POWER = 1785 WATTS
I.D. FAN POWER = 377 WATTS
O.D. FAN POWER = 182 WATTS
COP = 3.51
E.E.R. = 11.99 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
900
1050
TOTALCAP.
x 0.984
x 1.02
.
SENS.
CAP
x 0.945
x 1.07
COMPRESSOR KW
x 0.998
x 1.01
Rated with 25 Feet 3/4 suction 3/8 liquid lines
2.344
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
4TTB3036AA WITH MCDA36 AT 1080 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B. I.D.W.B.
TOTAL
CAPACITY
SENSIBLE CAPACITY
SYSTEM
72
75
78
80
kW
85
59
30.03
23.76
26.64
29.20
30.03
2.490
85
63
31.62
19.45
22.45
25.37
27.28
2.499
85
67
33.92
14.83
17.94
20.97
22.97
2.512
95
59
28.64
23.00
25.86
27.97
28.64
2.772
95
63
29.90
18.74
21.72
24.64
26.55
2.780
95
67
33.24
14.16
17.26
20.30
22.27
2.776
105
63
28.11
18.02
20.99
23.89
25.80
3.095
105
67
30.12
13.50
16.57
19.59
21.56
3.110
105
71
32.32
8.66
11.88
14.99
17.04
3.125
115
63
26.18
17.30
20.25
23.15
24.97
3.452
115
67
28.11
12.82
15.89
18.90
20.86
3.467
115
71
30.18
8.02
11.22
14.34
16.38
3.484
118.4
67
27.44
12.57
15.65
18.66
20.63
3.607
120
63
25.22
16.91
19.87
22.77
24.52
3.648
120
67
27.02
12.45
15.53
18.53
20.49
3.664
120
71
29.08
7.71
10.89
14.01
16.07
3.681
125
63
24.25
16.55
19.47
22.37
23.94
3.859
125
67
25.93
12.10
15.17
18.17
20.14
3.872
125
71
27.88
7.37
10.56
13.71
15.72
3.887
125.6
67
25.80
12.05
15.13
18.12
20.10
3.898
67
33.24
14.16
17.26
20.30
22.27
2.776
***95
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
.
All temperatures in Degree F
21
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 33,242 BTUH
AIRFLOW = 1080 CFM
COMPRESSOR POWER = 2245 WATTS
I.D. FAN POWER = 348 WATTS
O.D. FAN POWER = 183 WATTS
COP = 3.51
E.E.R. = 11.981 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
950
1150
TOTALCAP.
x 0.98
x 1.02
.
SENS.
CAP
x 0.943
x 1.06
COMPRESSOR KW
x 0.998
x 1.01
Rated with 25 Feet 7/8 suction 3/8 liquid lines
Performance Data
Cooling
4TTA3030AD WITH MCDA30 AT 982 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
I.D.W.B.
TOTAL
CAPACITY
SENSIBLE CAPACITY
SYSTEM
72
75
78
80
kW
85
59
28.25
23.39
26.29
27.59
28.25
2.311
85
63
28.81
18.82
21.94
25.02
27.05
2.313
85
67
31.49
14.20
17.33
20.40
22.48
2.320
95
59
27.03
22.81
25.46
26.39
27.03
2.561
95
63
27.32
18.21
21.33
24.40
26.36
2.562
95
67
29.83
13.62
16.76
19.85
21.88
2.571
105
63
25.51
17.33
20.38
23.44
25.28
2.843
105
67
27.35
12.84
15.89
18.96
20.97
2.852
105
71
28.85
8.25
11.32
14.36
16.40
2.866
115
63
23.35
16.29
19.29
22.15
23.35
3.154
115
67
24.59
11.91
14.88
17.88
19.87
3.164
115
71
26.23
7.47
10.41
13.02
15.38
3.179
118.4
67
23.61
11.42
14.45
17.38
19.37
3.278
120
63
22.17
15.64
18.62
21.34
22.17
3.324
120
67
23.21
11.26
14.28
17.20
19.18
3.333
120
71
24.85
6.67
9.78
12.50
14.85
3.349
125
63
20.78
14.82
17.68
20.26
20.78
3.502
125
67
21.65
10.51
13.52
16.37
18.31
3.510
125
71
23.14
6.14
9.22
11.98
14.07
3.526
125.6
67
21.54
10.53
13.49
16.33
18.28
3.532
67
29.83
IDDB=
80.00
21.88
*** 95
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 29,030 BTUH
AIRFLOW = 982 CFM
COMPRESSOR POWER = 1993 WATTS
I.D. FAN POWER = 367 WATTS
O.D. FAN POWER = 211 WATTS
COP = 3.31
E.E.R. = 11.3 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
900
1050
TOTALCAP.
x 0.98
x 1.02
.
SENS.
CAP
x 0.93
x 1.07
COMPRESSOR KW
x 0.99
x 1.01
Rated with 25 Feet 3/4 suction 3/8 liquid lines
2.571
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
4TTA3036AD WITH MCDA36 AT 1082 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
85
I.D.W.B.
59
TOTAL
SENSIBLE
CAPACITY CAPACITY
32.09
SYSTEM
72
75
78
80
kW
25.67
28.91
31.34
32.09
2.660
85
63
33.38
20.63
24.09
27.55
29.77
2.666
85
67
36.73
15.34
18.88
22.39
24.70
2.678
95
59
30.61
24.88
28.08
29.86
30.61
2.948
95
63
31.57
19.88
23.34
26.78
29.02
2.953
95
67
34.40
14.64
18.19
21.68
23.97
2.964
105
63
29.01
18.74
22.10
25.43
27.50
3.282
105
67
31.54
13.68
17.12
20.53
22.78
3.293
105
71
33.22
8.43
11.92
15.39
17.68
3.305
115
63
26.51
17.61
20.92
24.10
26.07
3.664
115
67
28.44
12.71
16.07
19.40
21.58
3.673
115
71
30.66
7.61
11.04
14.45
16.65
3.684
118.4
67
27.35
12.34
15.66
18.94
21.10
3.814
120
63
25.29
17.04
20.29
23.40
25.16
3.876
120
67
26.90
12.23
15.55
18.81
21.00
3.883
120
71
28.91
7.21
10.59
13.96
16.14
3.895
125
63
24.25
16.67
19.90
22.99
24.24
4.105
125
67
25.77
11.86
15.18
18.44
20.60
4.111
125
71
27.69
6.88
10.28
13.60
15.82
4.118
125.6
67
25.63
11.84
15.13
18.41
20.56
4.139
67
34.40
IDDB=
80.00
23.97
*** 95
2.964
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
.
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
22
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 33,829 BTUH
AIRFLOW = 1082 CFM
COMPRESSOR POWER = 2405 WATTS
I.D. FAN POWER = 348 WATTS
O.D. FAN POWER = 211 WATTS
COP = 3.34
E.E.R. = 11.41 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
1000
1150
TOTALCAP.
x 0.98
x 1.02
.
SENS.
CAP
x 0.93
x 1.07
COMPRESSOR KW
x 0.99
x 1.01
Rated with 25 Feet 7/8 suction 3/8 liquid lines
Performance Data
Cooling
4TTA3042AD WITH MCDB42 AT 1259 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
I.D.W.B.
TOTAL
SENSIBLE
CAPACITY CAPACITY
72
SYSTEM
75
78
80
kW
85
59
39.58
31.59
35.80
38.79
39.58
3.256
85
63
41.28
25.41
29.60
33.82
36.55
3.270
85
67
43.90
19.10
23.31
27.50
31.47
3.291
95
59
37.41
30.37
34.38
36.57
37.41
3.600
95
63
38.69
24.27
28.41
32.54
35.27
3.612
95
67
41.19
18.08
22.23
26.39
30.29
3.635
105
63
35.33
22.66
26.67
30.68
33.21
3.997
105
67
37.65
16.71
20.74
24.75
28.49
4022
105
71
40.20
10.62
14.68
18.72
21.39
4.521
115
63
32.42
21.33
25.26
29.16
31.52
4.431
115
67
34.50
15.54
19.52
23.38
27.05
4.456
115
71
36.90
9.64
13.63
17.56
20.14
4.487
118.4
67
33.32
15.10
18.99
22.86
26.43
4.615
120
63
30.86
20.57
24.41
28.21
30.47
4.666
120
67
32.76
14.90
18.78
22.60
26.15
4.691
120
71
35.02
9.11
13.00
16.90
19.46
4.722
125
63
29.74
20.12
23.95
27.80
29.65
4.916
125
67
31.53
14.47
18.34
22.19
24.76
4.940
125
71
33.70
8.74
12.64
16.46
19.06
4.970
125.6
67
31.37
14.42
18.30
22.11
25.70
4.971
67
41.19
IDDB=
80.00
30.29
*** 95
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 41192 BTUH
AIRFLOW = 1259 CFM
COMPRESSOR POWER = 2904 WATTS
I.D. FAN POWER = 520 WATTS
O.D. FAN POWER = 211 WATTS
COP = 3.32
E.E.R. = 11.33BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
1175
1325
TOTALCAP.
x 0.98
x 1.02
.
SENS.
CAP
x 0.93
x 1.07
COMPRESSOR KW
x 0.99
x 1.01
Rated with 25 Feet 7/8 suction 3/8 liquid lines
3.635
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
4TTA3048AD WITH MCDB48 AT 1369 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B.
I.D.W.B.
TOTAL
CAPACITY
SENSIBLE CAPACITY
SYSTEM
72
75
78
80
kW
85
59
43.22
34.90
39.16
42.45
43.37
3.630
85
63
44.81
28.31
32.43
37.55
40.46
3.644
85
67
50.37
22.07
26.66
31.03
33.84
3.675
95
59
41.27
33.72
38.10
40.47
41.45
4.013
95
63
42.37
27.04
31.60
36.31
39.15
4.024
95
67
47.16
21.19
25.59
29.78
32.53
4.060
4.449
105
63
38.50
24.98
29.86
33.99
36.91
105
67
43.00
19.44
23.51
27.60
30.32
4.490
105
71
44.97
13.09
18.07
22.02
24.67
4.526
115
63
35.24
23.79
28.10
32.02
34.75
4.927
115
67
37.95
17.70
21.70
25.75
29.13
4.965
115
71
41.21
11.72
16.29
20.38
23.02
5.011
118.4
67
36.15
16.92
20.76
25.18
28.11
5.192
120
63
33.36
22.80
26.93
31.16
33.23
5.188
120
67
35.76
16.79
20.52
25.12
27.92
5.224
120
71
38.83
10.90
15.42
19.20
21.80
5.274
125
63
32.17
22.23
26.22
30.47
32.24
5.461
125
67
34.32
16.05
20.20
24.65
27.29
5.502
125
71
37.31
10.41
14.78
18.53
21.07
5.549
125.6
67
34.12
15.90
20.22
24.56
27.17
5.534
67
47.16
IDDB=
80.00
32.53
*** 95
4.060
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
.
23
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 45,574 BTUH
AIRFLOW = 1369 CFM
COMPRESSOR POWER = 3313 WATTS
I.D. FAN POWER = 568 WATTS
O.D. FAN POWER = 180 WATTS
COP = 3.29
E.E.R. = 11.23 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
1300
1450
TOTALCAP.
x 0.99
x 1.02
.
SENS.
CAP
x 0.97
x 1.03
COMPRESSOR KW
x 0.99
x 1.002
Rated with 25 Feet 7/8 suction 3/8 liquid lines
Performance Data
Cooling
4TTA3060AD WITH MCDB60 AT 1525 CFM ** NET CAPACITY IN BTU/H X 1000
O.D.D.B
I.D.W.B.
85
59
TOTAL
CAPACITY
SENSIBLE CAPACITY
72
75
SYSTEM
78
80
kW
49.85
85
63
51.85
31.82
36.83
42.60
45.77
4.174
85
67
56.38
25.34
30.17
34.94
40.82
4.228
95
59
47.47
38.11
42.68
46.28
47.50
4.613
95
63
48.99
30.51
36.10
41.19
44.23
4.632
95
67
53.29
23.85
28.67
33.42
39.14
4.688
105
63
45.56
29.30
34.43
39.16
42.06
5.148
105
67
49.03
22.13
26.82
31.49
37.92
5.198
105
71
53.32
14.90
20.39
25.09
28.19
5.262
115
63
42.05
27.99
32.67
37.27
40.61
5.716
115
67
45.27
20.43
25.61
30.79
36.50
5.769
115
71
49.55
13.86
18.78
23.40
26.46
5.840
118.4
67
43.83
19.66
25.21
30.20
35.67
5.976
120
63
39.32
26.39
31.07
35.44
38.64
6.022
120
67
42.48
19.06
24.51
29.29
34.84
6.080
120
71
46.48
13.01
17.49
21.99
24.96
6.150
125
63
37.35
25.25
29.78
34.84
37.01
6.343
125
67
40.15
18.61
23.48
28.14
33.36
6.395
125
71
43.66
12.07
16.47
20.91
24.51
6.462
125.6
67
39.55
18.3
23.2
27.8
33.0
6.435
67
53.29
IDDB=
80.00
36.58
*** 95
4.688
*** Performance at selected design conditions
* Dry coil condition (Total Capacity = Sensible Capacity)
Total capacity, compressor kW and app. dew point valid only for wetcoil
All temperatures in Degree F
.
24
VALUES AT ARI RATING CONDITIONS
NET CAPACITY= 53,820 BTUH
AIRFLOW = 1525 CFM
COMPRESSOR POWER = 3969 WATTS
I.D. FAN POWER = 554 WATTS
O.D. FAN POWER = 180 WATTS
COP = 3.33
E.E.R. = 11.36 BTUH/W
CORRECTION FACTORS - OTHER AIRFLOWS
(Multiply or Add as indicated)
AIRFLOW
1450
1600
TOTALCAP.
x 0.98
x 1.00
.
SENS.
CAP
x 0.97
x 1.03
COMPRESSOR KW
x 1.00
x 1.01
Rated with 25 Feet 7/8 suction 3/8 liquid lines
MCD Wiring Diagram
COOLING ONLY
MCDA18-536
MCDB42-60
24
MCD Wiring Diagram
COOLING HEATING
MCDA18-524DB
25
MCD Wiring Diagram
COOLING HEATING
MCDA30-36DB
MCDB42-60DB
26
30
Electrical Data
4TTB3018, 4TTB3024, 4TTB3030, 4TTB 3036
31
Electrical Data
32
Electrical Data
4TTA3030AD, 4TTA3036AD, 4TTA3042AD, 4TTA3048AD
33
Electrical Data
34
Electrical Data
4TTB/MCD
TO POWER SUPPLY
230/1/50
230/1/50
MINI-SPLIT
OUTDOOR UNIT
SEE INDOOR UNIT
DIAGRAM FOR
CONNECTION
MARKINGS
230 VAC CONTROL
WIRING FROM OUTDOOR
TO POWER SUPPLY
230/1/50
230/1/50
NOTES :
1. POWER WIRING AND GROUNDING OF EQUIPMENT
MUSTCOMPLY WITH LOCALCODES.
2. INSURE THAT POWER SUPPLY AGREES WITH
EQUIPMENTNAME PLATE.
3. USE ONLY COPPER CONDUCTORS.
35
MCD Dimensional Data
OUTLINE DIMENSION
MCDA18-536DB
36
MCD Dimensional Data
OUTLINE DIMENSION
MCDB42-60DB
37
Dimensions
4TTB3 Outline Drawing
A
B
4TTB 018
3
730 (28-3/4)
829 (32-5/8)
756 (29-3/4)
4TTB 024
3
730 (28-3/4)
829 (32-5/8)
756 (29-3/4)
4TTB 030
4
943 (37-1/8)
946 (37-1/4)
870 (34-1/4)
3/4
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
508 (20)
4TTB 036
4
943 (37-1/8)
946 (37-1/4)
870 (34-1/4)
7/8
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
508 (20)
3/4
38
3/8
127 (5)
76 (3)
197 (7-3/4)
57 (2-1/4)
508 (20)
3/8
127 (5)
76 (3)
197 (7-3/4)
57 (2-1/4)
508 (20)
Dimensions
4TTA3 Outline Drawing
Note : All dimensions are in MM (Inches)
A
B
4TTA3030A
4
943 (37-1/8)
946 (37-1/4)
870 (34-1/4)
4TTA3036A
4
943 (37-1/8)
946 (37-1/4)
870 (34-1/4)
7/8
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
508 (20)
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
508 (20)
4TTA3042A
4
1045 (41-1/8) 946 (37-1/4)
870 (34-1/4)
7/8
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
508 (20)
4TTA3048A
4
1147 (45-1/8) 946 (37-1/4)
870 (34-1/4)
7/8
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
508 (20)
4TTA3060A
39
Mechanical Specifications
Options - 4TTB
General
Condenser Coil
The 4TTB3 is fully charged from the
factory for up to 25 feet of piping. This
unit is designed to operate at outdoor
ambient temperatures as high as 125°F.
Cooling capacities are matched with
a wide selection of air handlers and
furnace coils that are tested in accordance to AHRI and UL 1995.
The outdoor coil provides low airflow
resistance and efficient heat transfer.
The coil is protected on all four sides by
louvered panels.
Casing
Unit casing is constructed of heavy
gauge, G90 galvanized steel and
painted with a weather-resistant powder
paint on all louvers, panels, prepaint
on all other panels. Corrosion and
weatherproof CMBP-G30 DuraTuff™
base.
Refrigerant Controls
Refrigeration system controls include
condenser
fan
and
compressor
contactor. High and low pressure
controls are inherent to the compressor.
Liquid line drier is shipped separately
with the unit for field installation.
Compressor
The Scroll compressor features internal
over temperature and pressure
protection and total dipped hermetic
motor and thermostatically controlled sump/
crankcase heater . Other features include:
centrifugal oil pump and low vibration and
noise.
40
Space Optional Accessories:
Low Ambient Cooling
As manufactured, this unit has a cooling
F.
capability to 55°F. The addition of an
evaporator defrost control with TXV
permits low ambient cooling to 30°
Accessories
Thermostats — Cooling only and
heat/cooling (manual and automatic
changeover). Sub-base to match
thermostat and locking thermostat cover.
Mechanical Specifications
Options - 4TTA
General
Condenser Coil
The 4TTA3 is fully charged from the
factory for up to 25 feet of piping. This
unit is designed to operate at outdoor
ambient temperatures as high as 125°F.
Cooling capacities are matched with
a wide selection of air handlers and
furnace coils that are tested in accordance to AHRI and UL 1995.
The outdoor coil provides low airflow
resistance and efficient heat transfer.
The coil is protected on all four sides by
louvered panels.
Casing
Unit casing is constructed of heavy
gauge, G90 galvanized steel and
painted with a weather-resistant powder
paint on all louvers, panels, prepaint
on all other panels. Corrosion and
weatherproof CMBP-G30 DuraTuff™
base.
Refrigerant Controls
Refrigeration system controls include
condenser
fan
and
compressor
contactor. High and low pressure
controls are inherent to the compressor.
Liquid line drier is shipped separately
with the unit for field installation.
Compressor
The Scroll compressor features internal
over temperature and pressure
protection and total dipped hermetic
motor and thermostatically controlled sump/
crankcase heater . Other features include:
centrifugal oil pump and low vibration and
noise.
41
Space Optional Accessories:
Low Ambient Cooling
As manufactured, this unit has a cooling
capability to 55°F. The addition of an
evaporator defrost control with TXV
permits low ambient cooling to 30° F.
Accessories
Thermostats — Cooling only and
heat/cooling (manual and automatic
changeover). Sub-base to match
thermostat and locking thermostat cover.
Trane optimizes the performance of homes and buildings around the world. A business of Ingersoll Rand, the leader in creating
and sustaining safe, comfortable and energy efficient environments, Trane offers a broad portfolio of advanced controls and HVAC
systems, comprehensive building services, and parts. For more information, visit www.Trane.com.
Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice.
© 2013 Trane All rights reserved
SSA-PRCXXX-E4 April 2013
We are committed to using
environmentally conscious print
practices that reduce waste.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising