Xitanium - Philips

Xitanium - Philips
Xitanium
LED driver
Datasheet
Xitanium LED drivers – linear LV isolated
Xitanium 36W 0.3-1A 54V TD 230V
Enabling future-proof LED technology
Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as downlighting and
spot/accent lighting.
High reliability underpinned by 5 year warranty, enhanced by specific features that protect the connected LED module, e.g. hot wiring,
reduced ripple current and thermal derating. Most drivers feature central DC operation.
In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED
drivers, flexibility in luminaire design is assured thanks to an adjustable output current. Application-oriented operating windows offer the
flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. And the
adjustable output current also enables operation of various LED PCB solutions from different manufacturers.
Benefits
Features
Application
• High reliability underpinned by 5 year
• Simpler approval process and easy design-in
• Offices and industry
warranty
• Future-proof flexibility application-oriented operating
windows enable LED generation and
complexity management
• Compatibility - can also be used for
other manufacturers' modules or
OEMs' own PCB designs
• Flicker and noise free dimming with all
Touch and DALI LED drivers due to
amplitude dimming (AM)
August 2017
• Operating windows - output current can be adjusted
via the Philips MultiOne configurator ('TD' drivers) or
with a resistor outside the driver
• Reduced ripple current and thermal derating for
increased reliability
• Power ratings: 36W, 55W and 75W
• DALI dimmable & programmable, 1-10V dimmable,
and fixed-output versions
• All T5 form factors but various lengths
Electrical input data
Specification item
Value
Unit
Condition
Rated input voltage range
220...240
Vac
Performance range
Rated input voltage
230
Vac
Rated input frequency range
50...60
Hz
Performance range
Rated input current
0.2
A
@ full output power @ rated input voltage
Rated input power
42
W
@ rated output power @ rated input voltage
Power factor
≥ 0.9
Total harmonic distortion
≤ 20
%
@ rated output power @ rated input voltage
Efficiency
≥ 89
%
@ full output power @ rated input voltage
Rated input voltage DC range
186...250
Vdc
Performance range
Rated input current DC range
≤ 0.2
Adc
Performance range
Input voltage AC range
202...254
Vac
Operational range
Input frequency AC range
47.5...63
Hz
Operational range
Input voltage DC range
168...275
Vdc
Operational range
Standby Power (TD)
0.3
W
Isolation input to output
SELV
@ rated output power @ rated input voltage
Electrical output data
Specification item
Value
Regulation method
Constant Current
Unit
Condition
Output voltage
27...54
Vdc
Output voltage max.
60
V
Peak voltage at open load
Output current
0.3...1
A
Full output current setting
Output current tolerance
±5
%
Output current ripple LF
≤4
%
Output current ripple HF
≤4
%
Output power
10...36
W
Full output
Specification item
Value
Unit
Condition
Control method
DALI, TD
Dimming range
1...100
%
>700mA 1% dimming; < 700mA min. current 7mA
Galvanic Isolation
Basic
Ripple = peak / average
Electrical data controls input
Logistical data
Specification item
Value
Product name
Xitanium 36W 0.3-1A 54V TD 230V
Order code
871869655264300
Logistic code 12NC
9290 015 03606
Pieces per box
24
2/7
Xitanium 36W 0.3-1A 54V TD 230V
August 2017
Wiring & Connections
Specification item
Value
Unit
Condition
Input wire cross-section
0.5...1.5
mm2
WAGO744, solid wire
16...20
AWG
WAGO744, solid wire
Input wire strip length
8...9
mm
Output wire cross-section
0.5...1.5
mm2
WAGO744, solid wire
16...20
AWG
WAGO744, solid wire
Output wire strip length
8...9
mm
Maximum cable length
2000
mm
Total length of wiring including LED module, one way
Insulation
Insulation
input
input
output
SELV
DALI
Basic
output
DALI
SELV
Basic
Double
Double
Dimensions and weight
Specification item
Value
Unit
Length (A1)
360
mm
Width (B1)
30
mm
Height (C1)
21
mm
Fixing hole diameter (D1)
4.1
mm
Fixing hole distance (A2)
350
mm
Weight
180
gram
Condition
Operational temperatures and humidity
Specification item
Value
Unit
Condition
Ambient temperature
-25...+50
ºC
Higher ambient temperature allowed as long as Tcase-max is not
Tcase-max
75
ºC
Maximum temperature measured at Tcase-point
Tcase-life
75
ºC
Measured at Tcase-point
Maximum housing temperature
110
ºC
In case of a failure
Relative humidity
10...90
%
Non-condensing
exceeded.
3/7
Xitanium 36W 0.3-1A 54V TD 230V
August 2017
Storage temperature and humidity
Specification item
Value
Unit
Ambient temperature
-25...+85
ºC
Condition
Relative humidity
5...95
%
Non-condensing
Specification item
Value
Unit
Condition
Driver lifetime
50,000
hours
Measured temperature at Tcase-point is Tcase-life.
Lifetime
Maximum failures = 10%
Programmable features
Specification item
Value
Remark
Condition
Set output current (AOC)
LEDset, SimpleSet
See Design-in guide.
Default output current: ≤ 300 mA
Constant Lumen Over Lifetime (CLO)
Yes
DC emergency dimming (DCemDIM)
Yes
Corridor mode
Yes
Energy metering
Yes
Diagnostics
Yes
Adjustable Light Output ALO
Yes
Current output decreased to 15%
See Design-in guide
Default: T1=55s, T2=12s, T3=30min
Remark
Condition
Features
Specification item
Value
Open load protection
Yes
Automatic recovering
Short circuit protection
Yes
Automatic recovering
Over power protection
Yes
Automatic recovering
Hot wiring
No
Suitable for fixtures with protection class
I and II
per IEC60598
Certificates and standards
Specification item
Value
Approval marks
CCC / CE / ENEC
Ingress Protection classification
20
4/7
Xitanium 36W 0.3-1A 54V TD 230V
August 2017
Inrush current
Specification item
Value
Unit
Condition
Inrush current Ipeak
26
A
Input voltage 230V
Inrush current Twidth
140
µs
Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B
≤ 36
pcs
MCB
Rating
Relative number of LED drivers
B
10A
63%
B
13A
81%
B
16A
100% (stated in datasheet)
B
20A
125%
B
25A
156%
C
10A
104%
C
13A
135%
C
16A
170%
C
20A
208%
C
25A
260%
Driver touch current / protective conductor current
Specification item
Value
Unit
Condition
Typical touch current (ins. Class II)
< 0.4
mA peak
Acc. IEC61347-1. LED module contribution not included
Specification item
Value
Unit
Condition
Mains surge immunity (diff. mode)
1
kV
Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode)
2
kV
Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (diff. mode)
1
kV
Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode)
2
kV
Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Surge immunity
5/7
Xitanium 36W 0.3-1A 54V TD 230V
August 2017
Graphs
Operating window
Power factor versus output power
Efficiency versus output power
6/7
Xitanium 36W 0.3-1A 54V TD 230V
August 2017
THD versus output power
Notes
This product includes software licensed under terms that require Philips Lighting Holding B.V. to display the following notice:
ASF: Release ASF-3.32
The Atmel® Software Framework (ASF, www.atmel.com/asf) is a compilation of embedded software for Atmel flash MCUs: megaAVR®, AVR XMEGA®, AVR UC3 and SAM devices.
It has been designed to help develop and glue together the different components of a software design. It can easily integrate into an operating system (OS) or run as a
stand-alone product.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. The name of Atmel may not be used to endorse or promote products derived from this software without specific prior written permission.
4. This software may only be redistributed and used in connection with an Atmel microcontroller product.
THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE EXPRESSLY AND
SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
©2017 Philips Lighting Holding B.V. All rights reserved.
This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their
product offering. Note that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the
accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in
this document is not intended as any commercial offer and does not form part of any quotation or contract.
Date of release: August 14, 2017 v1
www.philips.com/technology
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising