Esko Dynamic Marks User Guide
Oglas
Oglas
07 - 2017
Dynamic Marks 16.1
User Guide
ii
Dynamic Marks
Contents
1. Copyright Notice........................................................................................................................................3
1.1 Third party license information ........................................................................................................ 4
2. Getting started.........................................................................................................................................16
2.1 Creating a first Mark Set ................................................................................................................. 16
3. The Dynamic Marks palette..................................................................................................................17
3.1 Adding a Standard Mark ................................................................................................................. 18
3.2 Adding objects as Mark ...................................................................................................................18
4. Dynamic Mark Properties......................................................................................................................20
4.1 Position ..............................................................................................................................................20
4.2 Color .................................................................................................................................................. 22
4.3 Specific Mark Properties ..................................................................................................................24
4.3.1 Cut Mark Properties .............................................................................................................. 24
4.3.2 Bearer Bars Properties ..........................................................................................................25
4.3.3 Gradation Strip Properties .................................................................................................... 26
4.3.4 Grid Mark Properties .............................................................................................................27
4.3.5 Corner Mark Properties ........................................................................................................ 29
4.3.6 Color Patch Properties .......................................................................................................... 31
4.3.7 Text Mark properties ............................................................................................................. 32
4.3.8 Barcode Mark properties ...................................................................................................... 41
4.3.9 Image Mark properties ..........................................................................................................42
4.3.10 White Underprint .................................................................................................................44
4.4 Changing the Symbol of a Standard Mark .....................................................................................45
5. Mark Sets.................................................................................................................................................. 46
5.1 Load Mark Set .................................................................................................................................. 46
5.2 Save Mark Set ...................................................................................................................................47
5.3 Delete Mark Set ................................................................................................................................48
5.4 Manage Mark Sets ........................................................................................................................... 48
5.5 Export Mark Sets ..............................................................................................................................49
5.6 Dynamic Marks Preferences ........................................................................................................... 49
5.7 Esko Mark Sets ................................................................................................................................. 50
6. Dynamic Marks Layer.............................................................................................................................53
7. Dynamic Panels in Dynamic Marks..................................................................................................... 54
8. Tips and tricks......................................................................................................................................... 55
Dynamic Marks
1
1. Copyright Notice
©
Copyright 2017 Esko Software BVBA, Gent, Belgium
All rights reserved. This material, information and instructions for use contained herein are the property of Esko Software BVBA. The material, information and instructions are provided on an AS IS basis without warranty of any kind. There are no warranties granted or extended by this document. Furthermore Esko Software BVBA does not warrant, guarantee or make any representations regarding the use, or the results of the use of the software or the information contained herein. Esko Software BVBA shall not be liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use the software or the information contained herein.
The information contained herein is subject to change without notice. Revisions may be issued from time to time to advise of such changes and/or additions.
No part of this document may be reproduced, stored in a data base or retrieval system, or published, in any form or in any way, electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from Esko Software BVBA.
This document supersedes all previous dated versions.
PANTONE
®
, PantoneLIVE and other Pantone trademarks are the property of Pantone LLC.
All other trademarks or registered trademarks are the property of their respective owners.
Pantone is a wholly owned subsidiary of X-Rite, Incorporated.
©
Pantone LLC, 2015. All rights reserved.
This software is based in part on the work of the Independent JPEG Group.
Portions of this software are copyright
©
1996-2002 The FreeType Project (www.freetype.org).
All rights reserved.
Portions of this software are copyright 2006 Feeling Software, copyright 2005-2006 Autodesk
Media Entertainment.
Portions of this software are copyright
©
1998-2003 Daniel Veillard. All rights reserved.
Portions of this software are copyright
©
1999-2006 The Botan Project. All rights reserved.
Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright
©
2001-2004 Robert A. van Engelen, Genivia inc. All rights reserved.
Portions of this software are copyright
©
1998-2008 The OpenSSL Project and
©
1995-1998 Eric
Young ([email protected]). All rights reserved.
This product includes software developed by the Apache Software Foundation (http:// www.apache.org/).
Adobe, the Adobe logo, Acrobat, the Acrobat logo, Adobe Creative Suite, Illustrator, InDesign,
PDF, Photoshop, PostScript, XMP and the Powered by XMP logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Microsoft and the Microsoft logo are registered trademarks of Microsoft Corporation in the
United States and other countries.
SolidWorks is a registered trademark of SolidWorks Corporation.
Portions of this software are owned by Spatial Corp. 1986 2003. All Rights Reserved.
3
1
Dynamic Marks
JDF and the JDF logo are trademarks of the CIP4 Organisation. Copyright 2001 The International
Cooperation for the Integration of Processes in Prepress, Press and Postpress (CIP4). All rights reserved.
The Esko software contains the RSA Data Security, Inc. MD5 Message-Digest Algorithm.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems in the U.S. and other countries.
Part of this software uses technology by Best Color Technology (EFI). EFI and Bestcolor are registered trademarks of Electronics For Imaging GmbH in the U.S. Patent and Trademark
Office.
Contains PowerNest library Copyrighted and Licensed by Alma, 2005 – 2007.
Part of this software uses technology by Global Vision. ArtProof and ScanProof are registered trademarks of Global Vision Inc.
Part of this software uses technology by Qoppa Software. Copyright
©
2002-Present. All Rights
Reserved.
All other product names are trademarks or registered trademarks of their respective owners.
Correspondence regarding this publication should be forwarded to:
Esko Software BVBA
Kortrijksesteenweg 1095
B – 9051 Gent [email protected]
1.1 Third party license information
This product includes Bonjour SDK.
Copyright (c) 2003-2004, Apple Computer, Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes Botan.
Copyright (C) 1999-2009 Jack Lloyd
2001 Peter J Jones
4
Dynamic Marks
2004-2007 Justin Karneges
2005 Matthew Gregan
2005-2006 Matt Johnston
2006 Luca Piccarreta
2007 Yves Jerschow
2007-2008 FlexSecure GmbH
2007-2008 Technische Universitat Darmstadt
2007-2008 Falko Strenzke
2007-2008 Martin Doering
2007 Manuel Hartl
2007 Christoph Ludwig
2007 Patrick Sona
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions, and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions, and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) OR CONTRIBUTOR(S) BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes ICC Profiles.
Some ICC Profiles were created by FFEI Ltd. (www.ffei.co.uk) using Fujifilm
ColourKit Profiler Suite (www.colourprofiling.com)
------------------------------------------------------------
This product includes ICC Profiles.
Some ICC profiles are copyright (C) by European Color Initiative, www.eci.org
------------------------------------------------------------
This product includes ICC Profiles.
Some ICC profiles are copyright (C) of WAN-IFRA, www.wan-ifra.org
------------------------------------------------------------
This product includes ICC Profiles.
Some ICC profiles are copyright (C) IDEAlliance(R). G7(R), GRACol(R) and
SWOP(R) are all registered trademarks of IDEAlliance(C).
------------------------------------------------------------
This product includes curl.
Copyright (c) 1996 - 2015, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose
with or without fee is hereby granted, provided that the above copyright
notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
1
5
1
Dynamic Marks
NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization of the copyright holder.
------------------------------------------------------------
This product includes LibTIFF.
Copyright (c) 1988-1997 Sam Leffler
Copyright (c) 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee, provided
that (i) the above copyright notices and this permission notice appear in
all copies of the software and related documentation, and (ii) the names of
Sam Leffler and Silicon Graphics may not be used in any advertising or
publicity relating to the software without the specific, prior written
permission of Sam Leffler and Silicon Graphics.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
OF THIS SOFTWARE.
------------------------------------------------------------
This product includes FCollada.
Copyright 2006 Feeling Software. All rights reserved.
Copyright 2005-2006 Feeling Software and
Copyright 2005-2006 Autodesk Media Entertainment.
Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is fur-
nished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
------------------------------------------------------------
This product includes FreeType.
Portions of this software are copyright (C) 2014 The FreeType
Project (www.freetype.org) licensed under the Freetype License.
All rights reserved.
------------------------------------------------------------
This product includes gSOAP.
EXHIBIT B.
6
Dynamic Marks
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2007 Robert A. van Engelen, Genivia
inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes ICU.
Copyright (c) 1995-2014 International Business Machines Corporation and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in the
Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, and/or sell copies of the Software, and
to permit persons to whom the Software is furnished to do so, provided that the
above copyright notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this permission notice
appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT
SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
------------------------------------------------------------
This product includes ilmbase.
Copyright (c) 2006, Industrial Light & Magic, a division of Lucasfilm
Entertainment Company Ltd. Portions contributed and copyright held by
others as indicated. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with
the distribution.
* Neither the name of Industrial Light & Magic nor the names of
any other contributors to this software may be used to endorse or
promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
1
7
1
Dynamic Marks
------------------------------------------------------------
This product includes iODBC.
Copyright (C) 1995-2006, OpenLink Software Inc and Ke Jin.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of OpenLink Software Inc. nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL OPENLINK OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes IP*Works!.
Copyright (c) 2013 /n software inc. - All rights reserved.
DISCLAIMER OF WARRANTY. THE LICENSED SOFTWARE IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER, /N SOFTWARE
SPECIFICALLY DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING
THE USE, OR THE RESULTS OF THE USE, OF THE LICENSED SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE LICENSED SOFTWARE IS ASSUMED
BY YOU. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY /N SOFTWARE OR ITS
EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS
WARRANTY, AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. FURTHER, THE
LICENSED SOFTWARE IS NOT FAULT-TOLERANT AND IS NOT DESIGNED, MANUFACTURED OR
INTENDED FOR USE OR RESALE AS ON-LINE CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS
REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES,
AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE
SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THE LICENSED SOFTWARE
COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL
DAMAGE ("HIGH RISK ACTIVITIES"). /N SOFTWARE AND ITS SUPPLIERS SPECIFICALLY DISCLAIM
ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
LIMITATION ON LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
LIABILITY OF /N SOFTWARE, IF ANY, FOR DAMAGES RELATING TO THE LICENSED SOFTWARE SHALL
BE LIMITED TO THE ACTUAL AMOUNTS PAID BY YOU FOR SUCH LICENSED SOFTWARE.
/N SOFTWARE'S LICENSORS AND THEIR SUPPLIERS SHALL HAVE NO LIABILITY TO YOU FOR ANY
DAMAGES SUFFERED BY YOU OR ANY THIRD PARTY AS A RESULT OF USING THE LICENSED SOFTWARE,
OR ANY PORTION THEREOF. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL /N SOFTWARE,
ITS LICENSORS, OR ANY OF THEIR RESPECTIVE SUPPLIERS BE LIABLE FOR ANY LOST REVENUE,
PROFIT OR DATA, OR FOR INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
OF ANY CHARACTER, INCLUDING, WITHOUT LIMITATION, ANY COMMERCIAL DAMAGES OR LOSSES,
HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OR
INABILITY TO USE THE LICENSED SOFTWARE, OR ANY PORTION THEREOF, EVEN IF /N SOFTWARE,
ITS LICENSORS AND/OR ANY OF THEIR RESPECTIVE SUPPLIERS HAVE BEEN INFORMED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY. EACH EXCLUSION OF
LIMITATION IS INTENDED TO BE SEPARATE AND THEREFORE SEVERABLE.
------------------------------------------------------------
8
Dynamic Marks
This product includes IP*Works! SSH.
Copyright (c) 2013 /n software inc. - All rights reserved.
DISCLAIMER OF WARRANTY. THE LICENSED SOFTWARE IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER, /N SOFTWARE
SPECIFICALLY DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING
THE USE, OR THE RESULTS OF THE USE, OF THE LICENSED SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE LICENSED SOFTWARE IS ASSUMED
BY YOU. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY /N SOFTWARE OR ITS
EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS
WARRANTY, AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. FURTHER, THE
LICENSED SOFTWARE IS NOT FAULT-TOLERANT AND IS NOT DESIGNED, MANUFACTURED OR
INTENDED FOR USE OR RESALE AS ON-LINE CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS
REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES,
AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE
SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THE LICENSED SOFTWARE
COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL
DAMAGE ("HIGH RISK ACTIVITIES"). /N SOFTWARE AND ITS SUPPLIERS SPECIFICALLY DISCLAIM
ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
LIMITATION ON LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
LIABILITY OF /N SOFTWARE, IF ANY, FOR DAMAGES RELATING TO THE LICENSED SOFTWARE SHALL
BE LIMITED TO THE ACTUAL AMOUNTS PAID BY YOU FOR SUCH LICENSED SOFTWARE.
/N SOFTWARE'S LICENSORS AND THEIR SUPPLIERS SHALL HAVE NO LIABILITY TO YOU FOR ANY
DAMAGES SUFFERED BY YOU OR ANY THIRD PARTY AS A RESULT OF USING THE LICENSED SOFTWARE,
OR ANY PORTION THEREOF. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL /N SOFTWARE,
ITS LICENSORS, OR ANY OF THEIR RESPECTIVE SUPPLIERS BE LIABLE FOR ANY LOST REVENUE,
PROFIT OR DATA, OR FOR INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
OF ANY CHARACTER, INCLUDING, WITHOUT LIMITATION, ANY COMMERCIAL DAMAGES OR LOSSES,
HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OR
INABILITY TO USE THE LICENSED SOFTWARE, OR ANY PORTION THEREOF, EVEN IF /N SOFTWARE,
ITS LICENSORS AND/OR ANY OF THEIR RESPECTIVE SUPPLIERS HAVE BEEN INFORMED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY. EACH EXCLUSION OF
LIMITATION IS INTENDED TO BE SEPARATE AND THEREFORE SEVERABLE.
------------------------------------------------------------
This product includes IP*Works! SSL.
Copyright (c) 2013 /n software inc. - All rights reserved.
DISCLAIMER OF WARRANTY. THE LICENSED SOFTWARE IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER, /N SOFTWARE
SPECIFICALLY DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING
THE USE, OR THE RESULTS OF THE USE, OF THE LICENSED SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE LICENSED SOFTWARE IS ASSUMED
BY YOU. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY /N SOFTWARE OR ITS
EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS
WARRANTY, AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. FURTHER, THE
LICENSED SOFTWARE IS NOT FAULT-TOLERANT AND IS NOT DESIGNED, MANUFACTURED OR
INTENDED FOR USE OR RESALE AS ON-LINE CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS
REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES,
AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE
SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THE LICENSED SOFTWARE
COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL
DAMAGE ("HIGH RISK ACTIVITIES"). /N SOFTWARE AND ITS SUPPLIERS SPECIFICALLY DISCLAIM
ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
LIMITATION ON LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
LIABILITY OF /N SOFTWARE, IF ANY, FOR DAMAGES RELATING TO THE LICENSED SOFTWARE SHALL
BE LIMITED TO THE ACTUAL AMOUNTS PAID BY YOU FOR SUCH LICENSED SOFTWARE.
/N SOFTWARE'S LICENSORS AND THEIR SUPPLIERS SHALL HAVE NO LIABILITY TO YOU FOR ANY
DAMAGES SUFFERED BY YOU OR ANY THIRD PARTY AS A RESULT OF USING THE LICENSED SOFTWARE,
OR ANY PORTION THEREOF. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL /N SOFTWARE,
ITS LICENSORS, OR ANY OF THEIR RESPECTIVE SUPPLIERS BE LIABLE FOR ANY LOST REVENUE,
PROFIT OR DATA, OR FOR INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
OF ANY CHARACTER, INCLUDING, WITHOUT LIMITATION, ANY COMMERCIAL DAMAGES OR LOSSES,
HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OR
INABILITY TO USE THE LICENSED SOFTWARE, OR ANY PORTION THEREOF, EVEN IF /N SOFTWARE,
1
9
1
Dynamic Marks
ITS LICENSORS AND/OR ANY OF THEIR RESPECTIVE SUPPLIERS HAVE BEEN INFORMED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY. EACH EXCLUSION OF
LIMITATION IS INTENDED TO BE SEPARATE AND THEREFORE SEVERABLE.
------------------------------------------------------------
This product includes JBIG2Lib.
Portions of this product copyrights (C) 2002 Glyph & Cog, LLC.
------------------------------------------------------------
This product includes JPEGLib.
This software is copyright (C) 1991-2016, Thomas G. Lane, Guido Vollbeding.
All Rights Reserved.
This software is based in part on the work of the Independent JPEG Group.
------------------------------------------------------------
This product includes Little CMS.
Little CMS
Copyright (c) 1998-2011 Marti Maria Saguer
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
------------------------------------------------------------
This product includes libpng.
Copyright (c) 2000-2002 Glenn Randers-Pehrson
The PNG Reference Library is supplied "AS IS". The Contributing Authors
and Group 42, Inc. disclaim all warranties, expressed or implied,
including, without limitation, the warranties of merchantability and of
fitness for any purpose. The Contributing Authors and Group 42, Inc.
assume no liability for direct, indirect, incidental, special, exemplary,
or consequential damages, which may result from the use of the PNG
Reference Library, even if advised of the possibility of such damage.
There is no warranty against interference with your enjoyment of the
library or against infringement. There is no warranty that our
efforts or the library will fulfill any of your particular purposes
or needs. This library is provided with all faults, and the entire
risk of satisfactory quality, performance, accuracy, and effort is with
the user.
------------------------------------------------------------
This product includes libxml2.
Copyright (C) 1998-2012 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is fur-
nished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
10
Dynamic Marks
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
------------------------------------------------------------
This product includes openexr.
Copyright (c) 2006, Industrial Light & Magic, a division of Lucasfilm
Entertainment Company Ltd. Portions contributed and copyright held by
others as indicated. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with
the distribution.
* Neither the name of Industrial Light & Magic nor the names of
any other contributors to this software may be used to endorse or
promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes OpenJPEG.
Copyright (c) 2002-2012, Communications and Remote Sensing Laboratory, Universite
catholique de Louvain (UCL), Belgium
Copyright (c) 2002-2012, Professor Benoit Macq
Copyright (c) 2003-2012, Antonin Descampe
Copyright (c) 2003-2009, Francois-Olivier Devaux
Copyright (c) 2005, Herve Drolon, FreeImage Team
Copyright (c) 2002-2003, Yannick Verschueren
Copyright (c) 2001-2003, David Janssens
Copyright (c) 2011-2012, Centre National d'Etudes Spatiales (CNES), France
Copyright (c) 2012, CS Systemes d'Information, France
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS'
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
1
11
1
Dynamic Marks
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes OpenSSL.
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or use of this
software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
endorse or promote products derived from this software without
prior written permission. For written permission, please contact
5. Products derived from this software may not be called "OpenSSL"
nor may "OpenSSL" appear in their names without prior written
permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following
acknowledgment:
"This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes OpenSSL.
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
must display the following acknowledgement:
"This product includes cryptographic software written by
Eric Young ([email protected])"
12
Dynamic Marks
The word 'cryptographic' can be left out if the rouines from the library
being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
------------------------------------------------------------
This product includes PCRE.
Copyright (c) 1997-2016 University of Cambridge
All rights reserved.
Copyright(c) 2010-2016 Zoltan Herczeg
All rights reserved.
Copyright(c) 2009-2016 Zoltan Herczeg
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the University of Cambridge nor the names of any
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes Qt.
The Qt Toolkit is Copyright (C) 2015 Digia Plc and/or its subsidiary(-ies).
------------------------------------------------------------
The Qt Toolkit is Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
------------------------------------------------------------
This product includes QtMigration.
Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1
13
1
Dynamic Marks
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
of its contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
------------------------------------------------------------
This product includes XercesC.
NOTICE file corresponding to section 4(d) of the Apache License, Version 2.0, in this
case for the Apache Xerces distribution.
This product includes software developed by
The Apache Software Foundation (http://www.apache.org/).
Portions of this software were originally based on the following:
- software copyright (c) 1999, IBM Corporation., http://www.ibm.com.
------------------------------------------------------------
This product includes XMP Toolkit.
Copyright (c) 1999 - 2010, Adobe Systems Incorporated
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
* Neither the name of Adobe Systems Incorporated, nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------
This product includes zlib.
Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
14
------------------------------------------------------------
Dynamic Marks
1
15
2
Dynamic Marks
2. Getting started
Using the Dynamic Marks plugin, you can create sets of marks, add them in a document, and have full control over these marks.
2.1 Creating a first Mark Set
1. Open a file in Illustrator. Create some objects you want to use as marks.
2. Go to Window > Esko > Dynamic Marks > Dynamic Marks to open the Dynamic Marks panel.
16
3. Click Create a Mark Set to start a new Mark Set.
Note: This step is optional. If no Mark Set is present, you can also immediately start adding marks (see step 4), a new Mark Set will be created automatically.
4. You can add marks in two ways:
• Select the objects you want to use as mark one by one, and click the
Add Selected Art
as Mark button
• Click the Add Standard Mark button to add a standard mark to the set.
5. From the fly-out menu, select Save mark set
Note:
You can only save a Mark set if the Illustrator file is saved. If not, you will be prompted to do so before saving the Mark Set
Dynamic Marks
3
3. The Dynamic Marks palette
In the Dynamic Marks palette, you can manage the marks in a set.
The palette will show the name of the latest loaded or saved mark set, and all the marks in the set. The icon in front of the mark name will show the type of mark: a standard mark, text, an object, ...
In the palette, you can
• change the name of a Mark by double-clicking it
• select and zoom in on a Mark, by clicking the button
or from the fly-out menu
• add the selected artwork as a Mark, by clicking the button or from the fly-out menu.
• add a Standard Mark, by clicking the button or from the fly-out menu. See
on page 18
• remove the selected Mark, by clicking the button or from the fly-out menu.
Note:
Removing a Mark will remove the entry in the Mark Set as well as the actual object.
• expand a mark, by selecting the function in the fly-out menu. Expanding a mark replaces the
Dynamic Mark by a normal object.
• change the order of the Marks by clicking and dragging.
• If the corresponding objects are in the same layer in the Layers menu, their order will be changed the same way.
• If you change the order in the Layers palette, the Marks in the Dynamic Marks palette will change accordingly
17
3
Dynamic Marks
Note that the Marks list shows the topmost Mark at the bottom of the list, while the Layers palette works the other way around.
Note: Same as in Adobe Illustrator's Layer palette, there are two different types of selecting in the Dynamic Marks palette:
• If you click the name, the Mark is selected in a blue bar, but the actual art is not selected in
Adobe Illustrator. This selection is used for Dynamic Mark palette operations (zoom, trash, expand, remove).
• If you click at the right side of the row (or if you select the art using the Illustrator select tools), the Mark is showing a colored rectangle, indicating that the actual art is selected in
Adobe Illustrator. This selection is used for the Marks Properties.
3.1 Adding a Standard Mark
You can add one of the predefined Standard Marks to your Mark set:
1. Click the Add Standard Mark button or select Add Standard Mark from the fly-out menu
2. Select the Standard Mark you want to add.
3. Click Add
The Standard Mark will be added to the Mark Set, and in the current document. You can change its properties in the Dynamic Marks Properties palette. See
on page 20
The Standard Marks currently available are:
• Cut Mark
• Bearer Bars
• Gradation Strip
• Grid Marks
• Corner Marks
• Color Patches
• Image Mark
For more information on the properties for the Standard Marks, see
on page 24
Note: It is not possible to apply scaling on standard marks. Every time the marks are updated, they will be regenerated at their original size.
3.2 Adding objects as Mark
You can add existing objects as a Mark to your set.
1. Select the object you want to use as a mark
18
Dynamic Marks
2. Click the Add Selected Art as Mark button . or select Add Selected Art as Mark from the fly-out menu.
The new Mark will appear in the Dynamic Marks palette. You can change its properties in
the Dynamic Marks Properties palette. See
on page 20
Note: If you select multiple objects, these objects will be grouped and added as one single mark in your set.
3
19
4
Dynamic Marks
4. Dynamic Mark Properties
You can open the Dynamic Mark Properties by choosing Window > Esko > Dynamic Marks >
Dynamic Mark Properties or by choosing Open Properties Palette from the flyout menu of
the Dynamic Marks palette.
4.1 Position
The position of a Mark is based on 3 settings:
Attach to
The position of the Mark can be based on
• Any page box: Media Box, Crop Box, Bleed Box, Trim Box or Art Box
Note:
• a Page Box that is not defined in the file, will be greyed out
• If you load a Marks set that uses a page box not defined in the current file, the Trim Box is used instead, and a warning is shown
• You can't delete a Page Box if there 's a mark attached to it.
• another Dynamic Mark
• a PowerLayout Repetition, such as "PowerLayout Grid 1"
• Named Art
Named Art is any art in your Illustrator document, that you gave a name in the Layers palette: browse to the object you want to name in the Layers palette, double click the default name (eg.
<path>) and enter a name.
When selecting Named Art..., you get a separate dialog, in which you can either type the name of the Named Art you want to use, or select it from the dropdown at the right. Once Named Art has been used, it remains available in the Attach To dropdown.
Named Art is only possible on objects, not on groups. Named Art can't be hidden or locked.
20
Dynamic Marks
4
Note: Standard Marks will be automatically attached to a currently selected PowerLayout
Standalone grid or another selected Dynamic Mark. If no grid or Dynamic Mark is selected, the
Standard Mark is attached to the Trim Box.
A PowerLayout Standalone grid is a Step and Repeat of a single file or object(s), generated by the PowerLayout Standalone plug-in. If such a grid is available in the document, you can select its name in the dropdown. For more information, see the PowerLayout Standalone documentation.
Positioning
The way the Mark is attached, can be chosen by clicking and dragging the blue square
(representing the Mark) to the desired position on the grey square (representing the
Attach To
reference). Each square has 9 reference points (top left center and right, middle left center and right, and bottom left center and right), so you have 81 different ways of positioning the mark.
This setting is not available for Bearer Bars and for Cut Marks.
In the example underneath, the top center of the (bounding box of the) mark will be placed on the left bottom corner of the (bounding box) of the reference defined in the Attach to field.
Note: If you create a Mark from an existing object, the Positioning settings (the blue rectangle) will be automatically set, using the smallest offset possible while keeping the object at the same location.
Offset
In the offset fields, you can move the mark based on the defined position. The direction of the offset (up, down, left or right) depends on the positioning, and is shown by the arrows.
Note: You can also manually move Marks. In that case, the offset will automatically adjust to the new location. The other settings (Attach To and Positioning) will NOT change.
Repeat
For custom marks, you can use the Repeat buttons, to choose if the mark should be repeated or not.
From left to right:
21
4
Dynamic Marks
• No repeat
• Repeat on all 4 sides. The positions of the marks are rotated 90º around the center of the
Attach To object. Examples:
• Repeated horizontally. The positions of the marks are mirrored over the vertical center line.
Examples:
• Repeated vertically. The positions of the marks are mirrored over the horizontal center line.
Examples:
Note: For vertical and horizontal repeat, the position of the marks is mirrored, but the actual marks are rotated 180 degrees.
4.2 Color
The color of a mark can be one of these settings:
Registration
The mark will be colored with 100% of every ink used in the document. If you change the tint to e.g. 42%, the mark will get 42% of every ink used in the document.
Changing the inks in the document can change the color of the mark. Technical inks are not used in the mark.
Note: If you manually change the color of a mark set to Registration, its color setting will change to "Static" (see below), using the newly set color.
Static
If color is set to "Static", the current color is stored, based on the actual inks. The color of the mark will not change if the order of the ink list is changed.
22
Dynamic Marks
4
Note:
When placed on an existing document, "Static" marks are the only marks that affect the ink list: the inks used in the mark will be added if necessary.
Dynamic
If color is set to "Dynamic", the current color is stored, but based on the ink positions in the Ink
Manager, and not the actual inks.
For example, if the first ink is Cyan, a 100% cyan mark is stored as "100% of the first ink". If the first ink is different (by changing the ink order, or by placing the mark on a different file), the mark will become 100% of the first ink.
Note: If the ink list in the document changes after adding the marks, you must click Update
Ink List in the Ink Manager for the marks to adjust to the updated ink list.
Darkest
The mark will be colored with 100% of the darkest ink used in the document. You can't change the percentage for "Darkest" ink, it will always be 100%.
Changing the inks in the document can change the color of the mark. Technical inks are not used in the mark.
Note: If you manually change the color of a mark set to Darkest, the color will change back to the darkest ink at the next mark update.
Black or Darkest
If the document contains a Process Black ink, the mark will be colored with 100% Black, otherwise the darkest ink used in the document is used. You can't change the percentage for
"Black or Darkest" ink, it will always be 100%.
Changing the inks in the document can change the color of the mark. Technical inks are not used in the mark.
Fill / Stroke
For custom marks and for Color Patch marks, you can define both the Fill and the Stroke Color.
For Stroke, you have an extra option
Same as fill
Defaults
Every Dynamic Mark has a default color attribute:
Mark Type
Custom mark (plain object)
Cut Mark
Text
Image Mark
Dynamic Objects (Barcode,
Panel, Table)
Bearer Bar
Gradation Strip
Available Color Options
all*
Registration, Darkest, Static all
Static, Dynamic** all all
No Color Options
Default
Dynamic
Darkest
Dynamic
Static
Static
Registration not applicable
23
4
Dynamic Marks
Mark Type
Grid Marks
Corner Marks
Color Patch
Available Color Options Default
Registration, Darkest, Static
Registration, Darkest, Static
Registration
Registration only applicable for stroke: all same as fill
(*): A Custom mark created from a mesh or gradient object will always have color attribute
"Static". This can't be changed.
(**): EPS image marks can only be Static.
Note: A Gradation Strip doesn't allow setting Color options. A Gradation Strip always uses every ink, except for technical inks.
Inks
When using
Dynamic color, you can choose what inks to include: All inks, only technical inks or only printing inks.
For any other color option, you can't change the drop down: for Static color and Registration it is fixed at "All", while for "Darkest" it is fixed at "Only Printing".
If the option
Include Varnish Inks is disabled, inks set as "Varnish" will not be taken into account for Dynamic color.
4.3 Specific Mark Properties
Standard Marks have, beside Position and Color, some specific properties.
Also Text Marks have specific properties, allowing to create dynamic Text Marks.
4.3.1 Cut Mark Properties
Cut Marks are created from a symbol named "CutMark", and are by default 0,1mm wide and
10mm long.
24
Dynamic Marks
4
Position: Cut Marks will be automatically attached to a currently selected PowerLayout
Standalone grid or another selected Dynamic Mark. If no grid or Dynamic Mark is selected, the
Cut Mark is attached to the Trim Box.
Color: Cut Marks are by default in "Darkest" color.
Offset: allows to define the offset for the Cut Marks. A positive offset will move the Cut Marks to the outside.
Symbol: allows to change the symbol used for the Cut Mark. See
on page 45,
4.3.2 Bearer Bars Properties
Adding a Bearer Bars mark will create two bars, one on each side, left and right (default) or top and bottom. The bars will automatically take the size (vertical or horizontal) of the "Attach" selection.
25
4
Dynamic Marks
Position: Bearer Bars will be automatically attached to a currently selected PowerLayout
Standalone grid or another selected Dynamic Mark. If no grid or Dynamic Mark is selected, the
Bearer Bars are attached to the Trim Box.
If the Show on Both Sides option is selected, you will get a Bearer Bar on both sides (top and bottom, or left and right).
By positioning the blue rectangles, you can choose between a vertical or horizontal orientation.
Color: Bearer Bars are by default in Registration color.
Width: The width of the Bearer Bar.
Extend: allows to extend the Bearer Bar on both size. Entering e.g. +5mm will extend the
Bearer Bar by 5 mm on both ends.
Offset defines the distance between the Attach to object and the Bearer Bars.
4.3.3 Gradation Strip Properties
Gradation Strips are created from a symbol named "GradationStrip", and are by default 3 rectangles of 5 x 5mm, horizontally, colored 40%, 80% and 100%, one strip per ink.
26
Position: Gradation Strips will be automatically attached to a currently selected PowerLayout
Standalone grid or another selected Dynamic Mark. If no grid or Dynamic Mark is selected, the
Gradation Strip is attached to the Trim Box.
If you change the Positioning setting (the blue rectangle), the gradation strip will rotate automatically based on the position of the blue rectangle.
Width: The width can be set to "One Strip per Ink" or to "Repeat to Fit".
Symbol: allows to change the symbol used for the Gradation Strip Mark. See
You can use any type of art in the symbol, but only paths and compound paths will be colored.
If you will use any text in your Gradation Strip symbol, it will be automatically colored with darkest ink.
Dynamic Marks
If you change the default Gradation Strip symbol, the default position will be based on the size of the symbol. If the width of the symbol is bigger than its height, the Gradation Strip will be created horizontally by default. If the height is bigger, the Gradation Strip will be created vertically by default.
Flip: when set to "Normal", the gradation is built from left to right, when set to "Reverted", the gradation strip is built from right to left.
4.3.4 Grid Mark Properties
Grid Marks are created from a symbol named "GridMark", and are by default a rectangle of 5 x
5mm, in Registration color.
4
Position: Grid Marks will be automatically attached to a currently selected PowerLayout
Standalone grid. If no grid is selected, you will get an error message.
Mark Positions & Copies:
Using the Where buttons, you can define where you want the Grid Marks:
• on the left side of the Repeat
• on the right side of the Repeat
• on top of the Repeat
• below the Repeat
• in between the columns
• in between the rows.
27
4
Dynamic Marks
Note: The "in between" options can not be used in combination with stagger. If you enable stagger while grid marks are set to "in between", or if you load a mark set containing such a mark, the grid marks will be placed at the side, and a warning will be given.
For the Mark Position, you can (besides the normal Position settings) set the Reference. The
Reference defines what cell or column to use as a reference:. You can set the Reference to
Outer Left Cell or Outer Right Cell, or to Outer Left Column or Outer Right Column.
If the Grid Marks are placed on the top or bottom of the repeat, the options become top/ bottom instead of left/right, and Row instead of Column.
If a Column is used, a single Grid Mark is placed, using the column as reference.
In case you use a Cell as Reference, you can choose to Repeat the grid mark every Row (or
Column), every 2 rows, ect...
The examples underneath shows a 5 by 5 repeat with staggering. The Position is always centered at the left side.
Outer Left Column:
Outer Right Column:
Outer Left Cell, no repeat:
Outer Right Cell, no repeat:
28
Dynamic Marks
4
Outer Left Cell, repeat every 1 rows:
Outer Left Cell, repeat every 2 rows:
Symbol: allows to change the symbol used for the Gradation Strip Mark. See
4.3.5 Corner Mark Properties
Corner Marks are created from a symbol named "CornerMark".
29
4
Dynamic Marks
Bounding Box Corners or Repetition Corners:
Using the buttons, you can define if you want corner marks on the bounding box of the selected Attach To area, or on the corners of every one-up. This option is only available if you attached the corner mark to a Repeat Grid.
Set Symbol: allows to change the symbol used for the Gradation Strip Mark. See
Offset allows to define the offset between the corner and the corner mark. If the lock is enabled, vertical and horizontal offset are kept the same. If the lock is disabled, you can enter different values for vertical and horizontal offset.
If an offset of 0mm is used (in the image underneath on the left), the bounding box of the corner mark is placed on the outside of the selected page box. The page box is shown in red, the corner mark in black and the bounding box in blue.
In the image on the right, the default offset of -8mm is used. You can see the Corner Mark being moved 8 mm to the inside, based on the original position. Since the default symbol is
10 mm by 10mm, this default setting places the corner mark at 2 mm to the outside of the selected page box.
30
4.3.6 Color Patch Properties
Color Patch marks are created from a symbol named "ColorPatch".
Dynamic Marks
4
Set Symbol: allows to change the symbol used for the Color Patch Mark. See
A Color Patch mark is dynamically colored in one ink. The Index defines the ink to use, based on the ink position in the Ink Manager.
You can however define a different color for the text and for the stroke.
The number of text fields depends on the number of text fields in the symbol. When using the default symbol, a Color Patch contains 3 text fields, set to the short ink name, the ruling and angle, and the index.
31
4
Dynamic Marks
Note: When you create a symbol for Color Patch using exact the same variable names (case sensitive), Dynamic Marks will automatically use these variables. This way, you can quickly create a Color Patch symbol with working variable text fields.
4.3.7 Text Mark properties
A Text Mark is a Custom Mark created from a text object. Text Marks can consist of static and dynamic text.
1. Create a text object, using the font and text settings you want to use, and add it as a Custom
Mark.
For more info on adding obejcts as Mark, see
on page 18
2. Open the Dynamic Mark Properties palette, by choosing Window > Esko > Dynamic Marks
>
Dynamic Mark Properties
The existing text is static, which means it won't change when you use the Mark into another document, or if the document changes.
You can make all or part of the text dynamic, to have it change with every document you use your mark into.
32
Note: If you want to have some static text, just leave that part of the text as it is (or type in new text) in the Text area.
3. To get dynamic text, you need to insert dynamic fields.
Dynamic Marks
Place your cursor where you want the field to be, or select the text to replace with a field, and click the Insert / Modify ... button.
4. In the Insert Field dialog that opens, choose the fields to insert: a) Select Local Variables to select variables from the local file, or Server Variables to use
SmartNames from the Automation Engine server. In that case, all Database queries defined on the server will be available, as well as all job and product parameters.
b) choose a field Category, for example Barcodes, Date & Time...
c) in that Category, choose the Field you want to use (see
34 for a list of available categories and fields), d) if applicable, choose the Format to use for your chosen Field (see
4
Note: The Preview line shows how the field will be resolved in the current document.
e) when you are satisfied with how your field will look like, click OK.
The dynamic parts of a text object will appear between square brackets.
White Underprint allows to add White Underprint to your Mark. See
on page
44
33
4
Categories and Types
Local Variables
Barcodes
Date & Time
Document
File Info (XMP)
Inks
34
Links
Dynamic Marks
• Number of Barcodes
• Barcode Type
• Barcode Code
• Bar Width Reduction
• Barcode Magnification
• Barcode Device Compensation
• Barcode Narrow Bar
• Date
• Time
• Date and Time
• File Name
• Fonts
• Layer Names
• CMYK Profile
• RGB Profile
• Color Mode
• Trim Box
• Crop Box
• Bleed Box
• Media Box
• Art Box
• Description
• Author
• Document Title
• Author Title
• Number of Inks
• Number of Technical Inks
• Ink Names
• Technical Ink Names
• Short Ink Names
• Abbreviated Ink Names
• Ink Types
• Ink Dotshapes
• Ink Angles
• Ink Rulings
• Printing Method
• Placed Files
• XML Content Files
System
Server Variables
File Info
Job Info
• Structural Design File
• Illustrator Version
• Creative Suite Version
• OS Type
• OS Version
• Short User Name
• Full User Name
• Extension of File
• File
• File Type
• First Folder of File
• Folder of File
• Folder of Input
• Job Name
• Order ID
• Sub Order ID
• Description
• Due Date
• Project ID
• Last Actor
• Job URL
• Category
• Category2
• Category3
• Category4
• Category5
• Category6
• Category7
• Customer Ref
• CSR
• CSR Email
• Customer ID
• Customer Name
• Customer Description
• Due Day
• Due Time
• Job Container Name
• Job Container URL
• Job CT URL
• Job ID
• Name of Folder of Job
• JI Legacy Job (JDF)
• JI Originator (JDF)
Dynamic Marks
4
35
4
Global
Misc
Path Info
Product Info
36
Job Barcodes
Dynamic Marks
• PS Printer Name
• PS Printer Name (JDF)
• Job Parameters
• Number of Barcodes
• Barcode Type
• Barcode Code
• Bar Width Reduction
• Barcode Magnification
• Barcode Device Compensation
• Barcode Narrow Bar
• Number of Inks
• Number of Technical Inks
• Ink Names
• Technical Ink Names
• Short Ink Names
• Ink Types
• Ink Dotshapes
• Ink Angles
• Ink Rulings
• Ink Printing Methods
<user defined smart names>
• Server
• File URL
• Job Temp URL
• URL Folder of Input
• URL of Input
• Customer's Product Reference
• Product Amount
• Product Custom Field 1
• Product Custom Field 2
• Product Custom Field 3
• Product Customer Description
• Product Customer ID
• Product Customer Name
• Product Description
• Product ID
• Product Name
• Product Part Custom Field 1
• Product Part Custom Field 2
• Product Part Custom Field 3
• Product Part Datazone
• Product Part Name
• Product Part Status
• 2of5
• Bobst
Dynamic Marks
• CLF8
• Codabar
• Code 39
• Code 128
• Code 39 Extended
• Data Matrix ECC 200
• EAN 8
• EAN 13
• GS1 128
• GS1 Databar Omnidirectional
• GS1 Databar Expanded
• GS1 Databar Expanded Stacked
• GS1 Databar Limited
• GS1 Databar Stacked
• GS1 Databar Stacked Omnidirectional
• GS1 Databar Truncated
• GS1 Datamatrix
• GS1 US Coupon Interim
• HIBC-39
• HIBC-128
• ITF-14
• ITF-16
• Int. 2of5
• Kurandt
• Laetus Pharma
• MS7
• MSI
• Marks and Spencer
• NDC-HRI
• PDF417
• MicroPDF417
• Plessey
• PZN
• PZN8
• Paraf Italy
• QR
• MicroQR
• UPC-A
• UPC-E
• UPC-SCS
Formatting Dynamic Fields
You can format certain fields so they look a certain way (for example, have the date in
European or American format).
You can use predefined formats or create custom formats. You can also choose to use a different format for each field, or the same format for all fields.
4
37
4
Dynamic Marks
Using an Existing Format
• You can choose an existing format to apply to your field in the Format list.
For example, use [name][ext] to display the file name and extension when using the File
Name field.
38
Tip: Hover over to get more information about the different formats.
Defining a Custom Format
To define your own field format:
1. Choose Custom in the format list.
2. Define your format in the box below (using the predefined formats and the information
under for help).
Dynamic Marks
4
Note:
• The items in square brackets, like
[major], are dynamic, the rest of the text is static.
• Use the Enter key to get a new line.
3. Check how your format resolves for the current file in the Preview line.
4. Click OK when you are satisfied.
Repeating the Format for All Items
If the field you want to use can have several values (e.g. Fonts, Ink Names, Placed Files...), you can put them all in one dynamic object.
You can also set the same format for all those values at once.
After choosing an existing format or defining a custom one:
1. Select Repeat format for all items.
2. Choose the Separator you want to use between the values (Comma, Space...).
39
4
Dynamic Marks
40
Note: You can also specify your own separator by typing it directly in the Separator list.
3. When you are satisfied with what you see in the Preview, click OK.
Reflow text
If you create a custom mark based on text in a text frame, resizing using standard transform tools will resize the text "as is" instead of reflowing the text inside the resized text box.
Dynamic Marks
4
If the
Reflow Text option is enabled, resizing using standard transform tools will resize the text box, and the text will reflow inside the resized text box.
4.3.8 Barcode Mark properties
A Barcode Mark is a Custom Mark created from a Barcode object. For more information on creating barcodes, please refer to the Dynamic Barcodes documentation.
1. Create a barcode, using the barcode type and settings you want to use, and add it as a
Custom Mark.
For more info on adding obejcts as Mark, see
on page 18
2. Open the Dynamic Mark Properties palette, by choosing Window > Esko > Dynamic Marks
>
Dynamic Mark Properties
The existing Barcode is static, which means it won't change when you use the Mark into another document, or if the document changes.
You can make all or part of the code dynamic, to have it change with every document you use your mark into.
41
4
Dynamic Marks
3. To get a dynamic barcode, you need to insert dynamic fields.
Place your cursor where you want the field to be, or select the text to replace with a field, and click the Insert / Modify ... button.
4. In the Insert Field dialog that opens, choose the fields to insert: a) choose a field Category, for example Barcodes, Date & Time...
b) in that Category, choose the Field you want to use (see
34 for a list of available categories and fields), c) if applicable, choose the Format to use for your chosen Field (see
Note: The Preview line shows how the field will be resolved in the current document.
d) when you are satisfied with how your field will look like, click OK.
The dynamic parts of a barcode will appear between square brackets.
Note: Only the barcode's code can be changed after making. You can not change the barcode type or other settings after creating a Mark from a bar code. To change these settings, you have to delete the Mark and create a new one.
White Underprint allows to add White Underprint to your Mark. See
on page
44
4.3.9 Image Mark properties
An image Mark is a mark created from a linked image
42
Dynamic Marks
1. There are two ways to create an Image Mark
• Click the Add Standard Mark button or select Add Standard Mark from the fly-out menu, and choose Image Mark as type.
• Place an image (supported file formats are JPG, PDF, TIFF, EPS and PSD) as a link, and add
it as a Custom Mark. For more info on adding obejcts as Mark, see
on page 18
2. Open the Dynamic Mark Properties palette, by choosing Window > Esko > Dynamic Marks
>
Dynamic Mark Properties
If the Image Mark was created from an existing image, the Dynamic Mark Properties will reflect the properties of this image: its position attached to the top left corner of the trim box, and the path of the linked file.
4
3. Set the Scaling
• When set to Numeric, you can enter the scaling in %.
• Scale to Fit will scale the image proportionally to fit the object defined in the "Attach to" field. You can use this for example to fit the image inside a named object. The % field will reflect the current scale factor.
• Downscale to Fit is the same as "Scale to Fit", but the image will only be downscaled (if necessary), not upscaled. The % field will reflect the current scale factor.
43
4
Dynamic Marks
4. Set the Rotation for the image using the buttons
5. Use the File field to set the path for the linked image. If the path is valid, the image will be shown in the document. Otherwise, a placeholder is shown.
If you used a placed image to create the Image Mark, its file path will be entered automatically.
You can enter the path manually, or use the Browse button.
You can use dynamic text in the path, e.g. the Job Folder. Use the Insert/Modify button. For
more information on dynamic text, see
6. Color can be set to Static or Dynamic. For an EPS image, only Static is allowed.
Note: If you switch from Dynamic to Static, the colors from the original file are used. If there is a difference in the number of channels between two real images, the mark will switch back to static.
7. White Underprint allows to add White Underprint to your Mark. See
page 44
Note: Image marks can NOT be modified (rotating, channel mapping, etc) outside of the
Dynamic Marks Properties palette.
4.3.10 White Underprint
White Underprint allows you to create a white background underneath the selected marks.
This white background can be necessary when printing on transparent or metal material.
White Underprint is available for Text Marks, Barcode Marks and Grid Marks
White Underprint Object
White Underprint objects will be created in a top-level "White Underprint" layer, and will be put in overprint.
The White Underprint object will be
• a solid rectangle, using the bounding box of a
Text Mark
• a solid rectangle, using the bounding box of a
Barcode Mark
• a solid rectangle, using the bounding box of a
Grid Mark
The Add Bar option, available for Grid Marks, will stretch the White Underprint over the full size of the Media Box (or Trim Box if no Media Box is defined).
• For vertical grid marks, the White Underprint object will be a vertical bar, using the width of the grid mark, and the height of the Media Box
• For horizontal grid marks, the White Underprint object will be a horizontal bar, using the height of the grid mark, and the width of the Media Box
If the Mark is modified, deleted or expanded, the White Underprint will also be modified, deleted or expanded.
White Underprint Ink
The Ink used for White Underprint on Dynamic Marks can be defined by clicking the
Ink
Settings button, and entering the name of the Ink to be used for White Underprint.
44
Dynamic Marks
In case the defined ink doesn't exist yet, a new spot color will be added to the swatches, using the Ink name and the Color patch.
When the name of an existing swatch is entered, this ink will be used for White Underprint.
Note: White Underprint can only use Spot Colors. If an existing swatch name is entered, and the swatch is not a spot color, a warning will be generated: "A swatch by this name already exists but is not defined as a Spot Color".
If you change the White Underprint ink, all White Underprint objects on Dynamic Marks in the open document will be changed as well.
The White Underprint ink definition is saved in the Mark Set. If you load a Mark Set containing a different White Underprint ink definition as in the open document, you can choose if you want to keep your White Underprint ink, or if you want to load the White Underprint ink definition from the Mark Set.
4.4 Changing the Symbol of a Standard Mark
You can change the Symbol used for a Standard Mark in the Dynamic Mark Properties, by clicking the
Set Symbol button, and selecting the desired Symbol from the list.
To change or add Symbols,
1. In the Dynamic Marks palette, select Open Symbol Library from the fly-out menu
The file DynamicMarks_CS6.ai (CS6) or DynamicMarks_AI18.ai (CC2014 and
CC2015)will be opened
2. Open the Illustrator Symbol Library by choosing Window > Symbols and use the Illustrator tools to add, edit, remove, duplicate, ... the symbols defined in the file.
3. Save and close the DynamicMarks file
The new and modified symbols will now be available when clicking
Set Symbol in the Dynamic
Mark Properties.
4
45
5
Dynamic Marks
5. Mark Sets
When no mark set is loaded, you get the option to load a mark set, or to create a new set.
From the Fly-out menu of the Dynamic Marks palette, you can
• Load a Mark Set
• Save the current Mark Set
• Delete the current Mark Set
• Manage Mark Sets
5.1 Load Mark Set
To load a Mark Set:
1. In the Fly-out menu of the Dynamic Marks palette, select Load Mark Set
46
The Load dialog will show the Esko Default Mark Sets, and Mark Sets saved at the location
defined in the Dynamic Mark Preferences. See
Note: Since Mark Sets are regular .ai documents, the list will show all Adobe Illustrator files at the defined location. When loading an Illustrator file that doesn't contain a Mark Set, nothing will happen.
2. Select a Mark Set from the list, and click Load.
Note: If the Mark Set contains a mark with the same name as a mark already in the
Dynamic Marks palette, an error message will be given, and the Mark Set will not be loaded.
Dynamic Marks
The marks from the loaded Mark Set are added in the Dynamic Marks palette. If you want to replace the current marks with the ones from the loaded Mark Set, you need to select all marks and delete them first.
If you load marks with dependencies, the mark will be attached to the object (e.g. PowerLayout
Grid or Named Art) with the same name as in the Mark Set file. If no such object exists, you will get an error message and the mark will be attached to the Trim Box.
5
5.2 Save Mark Set
To save a Mark Set:
1. In the Fly-out menu of the Dynamic Marks palette, select Save Mark Set
The Save dialog will show the Mark Sets already saved at the location defined in the
Dynamic Mark Preferences. See
on page 49
2. Enter a name for the Mark Set and click Save. If a Mark Set with this name already exists, you will get the option to overwrite it.
Note:
You can only save a Mark set if the Illustrator file is saved. If not, you will be prompted to do so before saving the Mark Set
Mark Sets are saved as simple .ai documents, containing only the objects needed for the Mark
Set.
Note: All Marks in a set need to have a unique name. If not, an error message is shown, and the Mark Set is not saved.
47
5
Dynamic Marks
5.3 Delete Mark Set
To delete a Mark Set, select Delete Mark Set in the Fly-out menu of the Dynamic Marks palette.
The Mark Set, including all Dynamic Marks will be removed from the file.
Note: This does not remove a saved (and loaded) Mark Set from disk. To do so, select Manage
Mark Sets from the Fly-out menu. See
5.4 Manage Mark Sets
To manage your Mark Sets:
1. In the Fly-out menu of the Dynamic Marks palette, select Manage Mark Sets
48
The Manage Dynamic Mark Set dialog will show the Mark Sets saved at the location defined
in the Dynamic Mark Preferences. See
on page 49
Note: Since Mark Sets are regular .ai documents, the list will show all Adobe Illustrator files at the defined location.
2. Select a Mark Set from the list, and
• Click Rename, enter a new name for the Mark Set, and click Rename to change the name of the Mark Set
• Click Delete to remove the Mark Set from the list. The actual Illustrator file will be deleted. This can not be undone.
Dynamic Marks
5
5.5 Export Mark Sets
To use a Mark set in the Dynamic taskson an Automation Engine server, you can export your
Dynamic Marks set as a Dynamic Marks Set (.dmk).
To export your Mark Sets:
1. In the Fly-out menu of the Dynamic Marks palette, select Export Mark Set
2. Select a file name and location for the Dynamic Marks Template.
3. Move the file to your DFE server at this location: server
\bg_data_marks_v010\DynamicMarks
Limitations:
• The server does not support different fill and stroke setting
• It is not possible to choose technical inks only or printing inks only.
• Color Patch marks are not yet supporte. As a workaround, you could manually create a custom mark that looks like the Color Patch.
Note: It is not possible to import a Mark Set back into Illustrator. It is highly recommended to keep the native Adobe Illustrator files for future modifications in the Marks.
5.6 Dynamic Marks Preferences
You can open the Dynamic Marks Preferences by choosing Illustrator > Preferences > Esko
> Dynamic Marks Preferences on Mac, or Edit > Preferences > Esko > Dynamic Marks
Preferences on Windows.
In the Dynamic Marks Preferences, you can set the location to save and load Mark Sets.
• Default Folder: Mark Sets will be saved to and loaded from the default Esko location.
49
5
Dynamic Marks
• on Mac OS X: /Users/Shared/EskoArtwork/DynamicMarks/
• on Windows Vista and 7: x:\Users\Public\Documents\EskoArtwork
\DynamicMarks\
• on Windows XP: x:\Documents and Settings\All Users\Application Data
\EskoArtwork\DynamicMarks\
• Custom Folder: Mark Sets will be saved to and loaded from a custom folder which you can select by clicking the Browse button.
5.7 Esko Mark Sets
When installing Dynamic Marks, a number of default Mark Sets are installed as well. These sets can not be changed, but you can load one of these sets, change it and save it under a different name.
Here is an overview of these Mark Sets:
1 x KAMA
A Custom Mark, using these settings:
• The mark is a circle of 3.2 mm diameter, and a vertical and horizontal line of 6.5 mm. All lines are 0.15 mm thick.
• Attached to the Trim Box
• The center of the mark is vertically centered, and 12 mm to the right of the left border of the trim box.
• Using Darkest color
1 x Label Row
A Grid Mark, using these settings:
• attached to PowerLayout Grid 1
• on the right side, with a reference to the outer left cell
• using a 3mm offset in horizontal direction, 0mm in vertical direction
• repeat Every 1-up.
• symbol 10 x 5 mm in Registration color
1 x Sheet
A Custom Mark, using these settings:
• The mark is a rectangle of 10 by 5 mm.
• Attached to the Media Box
• A 3 mm horizontal offset to the upper right part of the Media Box
• using Registration color
2x Label Row
Two Grid Marks, using these settings:
• attached to PowerLayout Grid 1
50
Dynamic Marks
• Right mark is on the right side, Left mark is on the left side, both with a reference to the outer left cell
• Right mark is aligned to the right bottom corner, Left mark to the upper left corner
• using a 3mm offset in horizontal direction, 0mm in vertical direction
• repeat Every 1-up.
• symbol 5 x 5 mm in Registration color
Mark Set 1 (Esko)
A set for maximum 6 inks in the document, units: mm
• 1 Registration Mark placed on every side
• a Text Mark with the name of the document
• a Text Mark with the date
• a Gradation Strip on the left, with 1 rectangle per ink, colored in 100%
• a Gradation Strip on the right, with a 40%, 80% and 100% rectangle for every ink.
• 6 Text Marks, one per ink, with the name of the ink, and colored in 100% of the ink.
Mark Set 2 (Esko)
A set for maximum 6 inks in the document, units: mm same as Mark Set 1, but with different type of Registration Mark
Mark Set 3 (Esko)
A set for maximum 4 inks in the document, units: mm
• 12 Gallus elements on left and right side of the document
Mark Set 4 (Esko)
A set for maximum 6 inks in the document, units: mm
• Bearer Bars in vertical orientation and attached to the Trim Box
• 6 Text Marks, one per ink, with the name of the ink, placed inside the Bearer Bar, and colored with 0,2% tint to knock out the Bearer Bar in the same separation
Mark Set 5 (Esko)
A set for maximum 12 inks in the document, units: mm
• Bearer Bars in vertical orientation and attached to the Trim Box
• a Gradation Strip on the left, with one circle per ink, colored in 100%.
• a Gradation Strip on the right, with one circle per ink, colored in 50%.
• Registration Marks placed on the left and right side.
• 12 Gallus elements on left and right side of the document
• a Text Mark with the name of the document, colored in registration
• a Custom Mark setting a background for the above mentioned Text Mark
• 12 Text Marks, one per ink, with the name of the ink, and colored in 100% of the ink.
• a Custom Mark setting a background for the above mentioned Text Marks
• 12 Text Marks, one per ink, with the current Angle of the ink, and colored in 100% of the ink.
• 12 Text Marks, one per ink, with the current Ruling of the ink, and colored in 100% of the ink.
• a Text Mark with the date and time
5
51
5
• a Text Mark with the name of the author, based on the XMP info
Dynamic Marks
52
Dynamic Marks
6
6. Dynamic Marks Layer
When adding a Dynamic Mark for the first time to a document, a layer named "Dynamic
Marks" will be created. Standard Marks are created in the Dynamic Marks layer, Custom Marks are moved to the Dynamic Marks layer. If you rename the Dynamic Marks Layer, all Dynamic
Marks created later will still be created in or moved to this layer already containing dynamic marks.
Loading a Mark Set
If you load a Mark Set, the Dynamic Marks in the set will be placed in the same layer as saved in the set. This means you can have two different layers containing Dynamic Marks at that point. Newly created marks will then be placed in one of those layers.
Locking or hiding the Dynamic Marks Layer
If the Dynamic Marks layer is locked, you will not be able to add any mark. A message will be shown in the message palette. However, all indirect operations are possible, for example changes in the Ink Manager will change the gradation strip, even if the Dynamic Marks Layer is locked.
If the Dynamic Marks layer is invisible, marks will be created / moved in the Dynamic Marks layer, and will immediately turn invisible.
53
7
Dynamic Marks
7. Dynamic Panels in Dynamic Marks
When opening a document containing a Dynamic Panel, you will see those Dynamic Panels in the Dynamic Marks palette.
By selecting a Dynamic Info Panel and choosing Convert Panels to Dynamic Marks from the fly-out menu, you can convert the selected Dynamic Panel into one or more Dynamic Marks.
54
• Every text item in the Dynamic Panel is converted to a separate Dynamic Text Mark, using the same variables.
• If possible, other panel items with the same color attribute will be grouped and combined in one single mark.
• The inks used in the Dynamic Panel are replaced by the corresponding Dynamic Marks color:
• A Dynamic Panel ink will become Dynamic color with mode "Only Printing Inks"
• A Dynamic Panel Technical ink becomes Dynamic color with mode "Only Technical Inks"
• Darkest ink becomes Darkest color
• An object using Registration swatch becomes Registration color
• Other inks (not Dynamic) become a static color.
• The position of converted panels will always be defined relative to the top left corner of the trim box
• Panel items that can't be converted into a Dynamic Mark (e.g. a linked image) will remain as a panel item, while other items are converted. A message will be shown.
Dynamic Marks
8
8. Tips and tricks
I open a new document, create an object to be used as a mark, and as soon as I use "Add
Selected Art as Mark", the color of the object changes or disappears. Why ?
If you have a document with e.g. only one rectangle, colored with 100% cyan in your document, the Ink Manager will only contain one ink (Cyan).
When you create a custom mark, the default color attribute is "Dynamic". At this moment, the color definition of the mark becomes "100% of the first ink in the ink manager". Because
Ink Manager doesn't read inks from marks with color attribute "Registration", "Darkest" or
"Dynamic", and because there are no other objects in the document, the inks list in the Ink
Manager will be empty, and so will the custom mark be.
As soon as another ink is used in the document, this ink will be the first ink in Ink Manager, and will be used by the Custom Mark.
In the same way, if the original document would contain e.g. one object in cyan and one in magenta (and nothing else), creating a Custom Mark from the cyan object would make magenta the first ink in the ink manager, so the mark would change from cyan to magenta.
Can I start from an existing standard mark to create my own mark symbols ?
Yes, you can, as long as you remember to expand the mark / symbol first (i.e. making it a regular object instead of a symbol).
What if I delete a symbol in the DynamicMarks(_CS6).ai file ?
If you delete a symbol in the DynamicMarks.ai file, the symbol will obviously no longer be available in the Set Symbol list. If you delete the default symbol for a Standard Mark, creating the corresponding Standard Mark will result in an error message. To fix this, you have to create these symbols again manually.
Existing marks will NOT be affected, since the symbol is internally copied in the file when creating the mark, or when setting a different symbol. This also means that you can open a file with marks using custom symbols (saved in your local DynamicMarks.ai file) on another computer without loosing the marks.
55
Prenesi
Javna povezava posodobljena
Javna povezava do vašega klepeta je bila posodobljena. You may view and manage your chat links after registration here.
Javna povezava do dokumenta
Oglas
