`BR` 19” Rack Catalogue
µ%5¶ ´ 5DFN&DWDORJXH BR Series 19” Rack Cabinet chassis are compact, one piece welded steel construction with
19" Rack stripping front and rear that may be used on their own, or supplied with a variety
of trim and styling kits to order, or fitted by customers into their own installation design.
There are three basic chassis types available. Standard 19" in 600 and 800mm depth with
adjustable 19" rack stripping , these are available in 14Ru,22Ru & 30Ru sizes there is also
a half rack width version of the 14RU rack, the BR14HR, which can take PC or be adapted
to take 19” equipment mounted vertically.
A fourth type of ‘BR’ style chassis is the ‘BRM’, available in 3RU, 4Ru,5Ru & 6RU sizes.
‘BRM’ racks are particularly suitable for fitting into or under work surfaces or for mounting on
swing arms or other mounting systems or as part of MW console or desk systems.
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
Specifications in this catalogue may be subject to change without notice
µ%5¶´5DFN&KDVVLV
Basic Rack Chassis
‘BR’ and ‘BRM’ basic 19” Rack chassis are
available in various sizes as plain units that
customers may fit and trim to their own
requirements.
Chassis are welded steel construction and
finished in Black Fine Texture powder coat.
‘BR’ Chassis are supplied with separate
plated rack stripping which can be mounted
in variable positions front and rear. ‘BRM’
Chassis have fixed rack strip front and rear.
BR146
BR148
BR228
BR308
BRM3
BRM4
BRM5
BRM6
Dimensions
W514mm x D673mm x H698mm
W514mm x D800mm x H698mm
W514mm x D800mm x H1054mm
W514mm x D800mm x H1409mm
W514mm x D500mm x H174mm
W514mm x D500mm x H219mm
W514mm x D500mm x H264mm
W514mm x D500mm x H308mm
Note:
Standard BR finish is Black. Illustrations are in grey in order to show up detail
Half Rack Chassis
The BR146 Rack chassis is also available in
a ‘half rack’ width. This is particularly useful
for accommodating PC Towers, allowing the
tower to stand next to a full 19” rack fit with
rack mount ancillary items that may need to
be close to the tower for technical reasons,
with cabling between the two via the side
apertures.
Dimensions
BR146HR W289mm x D673mm x H698mm
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
1
µ%5¶5DFNRSWLRQV 19” Adaptor Frame
The BR146HR Half Rack can be fitted with a
19” adaptor frame which will allow the
vertical mounting of up to 5Ru of standard
19” equipment.
This can be useful when a PC Tower needs
to be accommodated alongside extra drives
or a breakout box and other ancillaries that
come in standard 19” chassis.
BRHR-195AF 5Ru x 19” adaptor frame.
Cable Access Covers
If BR chassis are joined together or there is
no rear access for cables, cut-outs are
provided in the sides at the rear which can
take cable tray up to 150mm wide.
These apertures can be closed off when
required by fitting a blanking plate.
This is supplied as an accessory to the basic
BR chassis.
A single one per side is required for 14Ru
and 22RU chassis and two for a 30RU
chassis.*
BR14ST
Side Access cover
* None required if BR chassis are fitted with full side
trim panel
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
2
µ%5¶ 5DFNRSWLRQV Top Panels
In many applications ‘BR’ Racks are fitted
under worktops and they have a cut-out in
the top to allow control panels etc to be sunk
into the worktop surface if required.
When used in ‘stand-alone’ applications a
separate top panel option is available which
may be mounted directly onto the rack
chassis or raised 20mm on spacers to provide
extra ventilation
BR146-RTP
BRHR-RTP
BR148-RTP
Raised top cover kit for BR146
Raised top cover kit for BR14HR
Raised top cover kit for BR22/30
Glass Doors
BR chassis may be fitted with tinted
toughened glass doors, front or rear. These
doors are inset into the chassis frame and will
therefore require the Rack strips to be inset
slightly back from the face of the rack
Glass doors are lockable but may also be
securely latched shut without need for a key.
BR14-FGD full width door for BR146/148
BR14HR-FGD half width door for BR14HR
BR22-FGD full width door for BR228
BR30-FGD full width door for BR308
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
3
µ%50¶´RSWLRQV Vented Door
BR chassis may also be fitted with ventilated
steel doors, front or rear. These doors are
inset into the chassis frame and will therefore
require the Rack strips to be moved slightly
back from the face of the rack
Steel doors are lockable but may also be
securely latched shut without need for a key.
BR14-VSD full width door for BR146/148
BR14HR-VSD half width door for BR14HR
BR22-VSD full width door for BR228
BR30-VSD full width door for BR308
Rear Extension Panel
To allow extra clearance for connectors and
cables on extra deep equipment that may be
mounted into 670mm and 800mm depth
chassis a box section quick release rear panel
may be fitted which extends the effective
depth of the enclosure by 100mm.
BR14-FGD full width door for BR146/148
BR14HR-FGD half width door for BR14HR
BR22-FGD full width door for BR228
BR30-FGD full width door for BR308
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
4
µ%5¶´5DFN7ULPV
Optional Side Trim Panels
Two Part Trims
Two part side trims are designed to
give BR chassis an attractive
appearance that can be economically
matched to existing décor by changing
only the lower side segment.
Stock variations are available in a
combination of:
TK2/07 Black/Cobalt Blue Nextel
TK2/08 Black/Terracotta Nextel
TK2/LO Black/Light Oak Veneer
TK2/B Black/Beech Veneer
Add Rack code in front of trim code
Single Part Trims
Single part side trims are also available
in a variety of finishes as a lower cost
option.
Stock available are:
TK1/06 Black Nextel
TK1/LO Oak Veneer
TK1/B Beech Veneer
Add Rack code in front of trim code
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
5
µ%5+6¶´&DELQHWV
‘Hi-Style’Trims
‘BR’ 19” Rack chassis can be provided
fitted with a complete ‘Hi-Style’ Trim and
panel set, with or without curved tinted
Acrylic doors.
The finished appearance is very different
from a typical 10” ‘Rack Box’ and BR
cabinets finished in this way will enhance the
appearance of any installation area.
Panels are finished in Nextel which has an
unusual fine suede like soft appearance but
is very hard wearing and easily cleaned.
Coloured inserts are available from stock as
for the TK” panel sets and special inserts can
be made to customer order to match existing
décor
BR146FS-TK2 W514mm x D500mm x H308mm
BR228FS-TK2 W514mm x D500mm x H308mm
BR308FS-TK2 W514mm x D500mm x H308mm
Stock Colour codes
06/08
06/07
06/LO
06/B
06/LO Black Nextel/Light Oak Veneer
06/B Black Nextel/Beech Veneer
06/07 Black Nextel/Cobalt Blue Nextel
08/08 Black Nextel/Terracotta Nextel
Curved Doors
Designed to go with BR ‘Hi-Style Racks the
optional tinted, curved Acrylic door kit
enhances the appearance of the enclosure as
well as protecting the equipment from the
environment.
The door is easily is retro-fittable and non
lockable.
BR14-CFD for 14Ru Rack
BR22-CFD for 22Ru Rack
BR30-CFD for 30Ru Rack
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
6
%55DFN$FFHVVRULHV
Acoustic Foam Kits
‘BR’ Racks can be fitted with Acoustic foam
noise suppression kits for use in areas where
noise may be a problem, such as Edit Suites,
recording Studios etc.
Particular care must be taken to ensure that
equipment fitted into the enclosure is
properly cooled and the use of a low noise
Fan Tray is recommended as a minimum
requirement, but the exact specifications will
depend on the equipment fit and the
environment.
BR**-AFK
Specifications Subject to Quotation
Worktop Support
For use if BR146/148 Racks are to be fitted
under a work top the PDSDSB support
bracket allows the work top to be securely
fixed.
.
PDSDSB worktop support bracket
Castor Base Kit
BR Racks may be mounted on castors
(supplied as standard on all BRHS units).
Castors are supplied with mounting plates to
increase the load bearing capacity of the rack
base.
BR-CSK4 Castor and base support kit
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
7
µ%5¶5DFN$FFHVVRULHV BRM Fittings
BRM racks are often fitted side by
side and/or under shelves and cable
entry slots are therefore provided on
the top and sides (as well as
underneath) When BRM Racks are
used in ‘Stand-alone’ applications
these cable entry slots can be fitted
with vent grilles and blanking plugs.
BRM-VTG Top vent Grille
BRM-RBP Side Blanking grommet
Tube Mount
An adjustable height tube mount is
available for mounting BRM modules
raised above desk work top panels.
Panels require a 60mm diameter hole to
be cut and cable entry can be via the tube
or module rear panel.
BRM-XTM 100mm > 180mm adjustable
Swing Arm Mount
Desk top mounting, height adjustable heavy
duty swing arm will take all BRM modules.
Requires 20mm hole in worktop surface*
Suitable for loads up to 40Kg.
BRM-SA50 100mm > 180mm ajustable
* Considerable loads can be imposed on the mounting point.
Not all work surface materials may be suitable. Please check
with ELDECO before ordering
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
8
´5DFN$FFHVVRULHV
VCR Rack Kits
19” Rack Mounting Kits are available for most
popular VCRs from JVC, Sony, and Panasonic
The list of these changes to keep pace with the
introduction of new models and can be supplied on
request.
Sliding Shelves
UR19ESLD Full extension medium duty
19”Rackmount sliding shelf kit with Ball race
Slides. Available with separate 2ru/3ru/&4ru rack
ear options. Takes equipment with chassis width
up to 412mm Maximum load - 45Kg
UR19ESLD-2U- Medium duty shelf 2U- Rack ears
UR19ESLD-3U Medium duty shelf 3U- Rack ears
UR19ESLD-4U Medium duty shelf 4U- Rack ears
UR19ESHD Full extension heavy duty
19”Rackmount sliding shelf kit with Ball race
Slides. Maximum load - 60Kg
UR19ESHD
Heavy duty shelf 1U
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
9
´5DFN$FFHVVRULHV
Monitor Rack Kits
19” Rack Mounting Ki ts are available for many
popular Monitors from JVC, Sony, Ikegami and
others.
The list of these changes to keep pace with the
introduction of new models and can be supplied on
request.
Fixed Shelves & Chassis supports
Fixed Chassis support angles mount between front
and rear rack strip and are suitable to hold items
weighing up to 25Kg with a chassis width of
300mm+.
For narrower items, or items weighing up to 30Kg,
vented shelf trays, ER19ES may be fitted to chassis
support angles.
ER19EBS
Chassis supports BR146 deep Rack
ER19ES/EBS
Chassis supports+shelf 800 deep Rack
ER19EBED
Chassis supports 670 deep Rack
ER19EBED/EBS Chassis supports+shelf 800 deep Rack
19” Trays
Front mounting equipment shelf in 2ru/3u rack
options. Supplied with fixings.
Takes equipment with chassis width up to 412mm
Maximum load - 20Kg
UR19ETS-2U Cantilever mount equipment tray 2RU
UR19ETS-3U Cantilever mount equipment tray 3RU
ELDECO bvba-sprl. Kalkenstraat 91-93 B-8800 ROESELARE (Roulers) – Belgium
Tel.+32 (0)51.24.00.99 Fax: +32 (0)51.24.02.57 Email: eldeco@eldeco.be Web: www.eldeco.be
10
0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising