Re emote e Acc cess to t NB HMIs s and CJ or CP Se eries PLCs s Quic ck Sta art Gu uide erview: Ove 1. Omro on has partn nered with eW WON, a glob bal supplier o of connectivvity software tools, for a simple to imple ement solutio on for remote access to PLCs and H HMIs at a customer. 2. This guide g covers s steps to do ownload eW WON connecttivity tools and how to co onfigure the router for NB se eries HMIs and a CJ or CP series PLC Cs. 3. eWO ON solves the e biggest pro oblem with in ndustrial rem mote accesss - connectin ng quickly an nd securely through a custom mer’s LAN without knowing the netw work setup be eforehand. Remote Access Made Easy with eWON An eWON/ Omron Collaboration eWON is the global leader in secure remote access. Founded in 1991, eWON is a Belgian manufacturer of industrial connectivity devices. Over the last 15 years, eWON has become the global market leader for intelligent cloudmanaged remote access devices, and works with manufacturers of PLCs and automation systems throughout the world. Solution Advantage By combining Omron’s automation expertise with eWON’s connectivity knowhow, OEMs and machine builders get a cohesive, global solution for remote access. The experience is as good as being next to the machine. The eWON COSY 141 eWON allows users to upload projects, gain remote use of an HMI, debug the PLC program and, if necessary, download new settings or programs, all done remotely to immediately support the customer. No More IT Challenges! Once an eWON device is configured, it can be deployed anywhere in the world. Because the eWON makes an outbound connection, it eliminates the need for customer network/ firewall changes. In most cases, it just works. It is the best solution to the biggest problem with industrial remote access - connecting quickly and securely through a customer’s LAN without knowing the n etwork setup beforehand. Fully Compatible with Partner products Omron’s business is Machine Automation, they provide the latest in sensing, motion and control technology, to help customers develop better machines. As a trusted worldwide partner in Automation, providing customers the support to operate globally requires secure remote connectivity. Remote access made possible by eWon allows Omron to expand its communications offerings. Quick Facts Simple remote maintenance for CJ or CP PLC with NB HMI setup. Outbound communication means no complications with IT depts. Quickly support your customer Eliminate expensive trips Easy and secure remote access using existing LAN Preconfigure your eWON before deployment Get Up and Running with Omron and eWON Select and Connect in Under 20 Minutes Step Action 1. Download and Install eCatcher and eBuddy onto your Windows PC http://www.ewon.us/us/Support/software-download.html Note: On Windows 7 Right click the eCatcher installation file and run as administrator. 2. Launch eCatcher and select "Create Free+ Account.” From there, you’ll fill out all the information we need to activate your account. *Make sure you use a valid email address! We’ll send you an email with a link that activates your new account. 3. Log in with your new account and click the "+" button to add a new device. Now you’ll name your eWON, fill out some custom fields (if desired) and get your activation key *Click “Copy to Clipboard” to save yourself some time. 4. Connect an Ethernet cable from your computer to one of the four LAN ports on your COSY. * Straight-through or cross-over cables will work 5. Connect an Ethernet cable from your network to the WAN port so the COSY is able to reach the internet. 6. Open eBuddy and select the “Set IP Address” option. Here we will set the LAN IP address of your eWON. * Make sure to pick an IP address that won't conflict with your eWON’s WAN IP or your computer’s IP! More information can found here: http://wiki.ewon.biz/COSY/0_Set_eWON_Machine_LAN_IP_address Illustration Get Up and Running with Omron and eWON Select and Connect in Under 20 Minutes 7. Set your computer’s IP address to be in the same range as the IP address chosen for the eWON’s LAN. *These settings are accessible from the Control Panel in the Network and Sharing Center. 8. Open your web browser and enter the LAN IP address of your eWON into the address bar. *The default username and password are both “adm” 9. Select the “Quick Launch Wizard” button and fill out each section of the wizard completely. *You will be asked for the "Activation Key" that was copied to your clipboard earlier. *There are four sections that need to be completed: System, Internet, Talk2M, and Gateway. 10. Lastly, unplug the Ethernet cable connecting your computer to the eWON’s LAN part and return your computer’s IP settings to the original configuration. 12. Congratulations! Your eWON is now ready to go, simply open eCatcher, select your eWON, and click connect! Get Up and Running with Omron and eWON Select and Connect in Under 20 Minutes 13. The NB is not compatible with the eWON’s Plug’n Route feature. To disable Plug’n Route, browse to the eWON’s web page and select “Settings” 14. Click on “Maintenance” and check the “Show advanced options” checkbox. 15. Click the “Edit COM configuration” to view the COSY’s configuration page. 16. Find the parameter “NATItf” and double click the value to pull up the editor. Change the value to equal “0”. Click “Ok” 17. Click the “Save” button to save the configuration change and reboot the COSY to apply the change. NOTE: After you have disabled Plug’n Route, you must set the gateway in all Ethernet devices behind the eWON to be the eWON’s LAN IP address. Unless the gateway is set, you will not be able to reach the device through a remote connection. Get Up and Running with Omron and eWON Select and Connect in Under 20 Minutes 18. The NB requires changes to the MTU size of the Talk2m-eCatcher Connection network adapter. To modify this value, bring up your Network Control Panel and select “Change Adapter Settings” 19. Double click on the Talk2meCatcher Connection network adapter 20. From the Talk2m-eCatcher Connection Properties pane, select configure. Click on the Advanced tab, select the MTU property and set the value to 800. Click OK Get Up and Running with Omron and eWON Select and Connect in Under 20 Minutes Configure Omron CJ2 In CX Programmer, set the PLC IP Address. In this case the IP address is 0.0.0.0 which means default 192.168.250.x. x is the node number which is set by the node number rotary switches on the PLC near the Ethernet cable. (0 to 99). If you type in an address you get the full address range. For FIN’s the auto mapping of Ethernet to FIN’s only works to 254 on a Class C network. Set the dynamic IP address feature In CX Programmer, to find the PLC when connected remotely, select show all and then setting the network type to Ethernet – which gives you the Omron FIN’s protocol. Get Up and Running with Omron and eWON Select and Connect in Under 20 Minutes FIN’s has its own network and node address settings. It will be a lot easier if the PLC node number matches the Ethernet node address (the last octet in the IP address on a Class C network – 255.255.255.x). Since the NB requires changes to the MTU size of eCatcher’s network adapter, we need to change the frame size for the PLC to 700 to communicate with it as well. Set the Default Gateway in the Ethernet settings to the eWON’s LAN IP address Configure NB Panel Set the Default Gateway address in the Panel to the eWON’s LAN IP address Note: At this time the eWON is successful in communicating with the NB through the NB Ethernet Port only if the NB Ethernet port is being used to talk to a PLC. Just configuring the Ethernet port is not enough – it must be used with a PLC. Therefore if you use the serial port to talk to the PLC the eWON does not work with the Ethernet Port. OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • firstname.lastname@example.org OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 18.104.22.168.99.20 • 01-800-226-6766 • email@example.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Authorized Distributor: Automation Control Systems • Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders Temperature & Process Controllers • Single and Multi-loop Controllers Sensors & Vision • Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors • Amplified Photomicrosensors • Measurement Sensors • Ultrasonic Sensors • Vision Sensors Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators • Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches QSG-EWON_NB_CJ 11/14 Note: Specifications are subject to change. Printed on recycled paper. © 2014 Omron Electronics LLC Printed in U.S.A.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project