Packaged Terminal Air Conditioner (PTAC)

Packaged Terminal Air Conditioner (PTAC)
Packaged Terminal Air Conditioner (PTAC) Air Conditioner /
FRP15ETT2R
Electric Heater
Product Dimensions
Height16"
Width42"
Depth13-13/16"
More Easy-To-Use Features
Comfort Control Design
Simple controls allow guests to
customize their settings, while quiet,
uniform air movement keeps rooms
comfortable.
Smart Self-Check
Provides nine diagnostic points for selfcheck and correction of fault conditions.
Eco-Friendly
Frigidaire® uses R-410A refrigerant that’s
not harmful to the earth’s ozone layer
and meets U.S. Environmental Protection
Agency requirements.
Effortless™ Operation
Simple, intuitive room controls are easy
for guests to operate — ensuring a
relaxing, more comfortable stay. Features
like Effortless™ Restart and Ready-Select®
controls reduce maintenance calls.
Performance
BTUs
Cool
15,000 / 14,600
Electric Heater
17,000 / 13,900
Signature Features
SilentDesign™
Energy-Saver Option
Sound reduction package.
This function effortlessly maximizes
energy efficiency while keeping guests
comfortable.
Effortless™ Maintenance
Effortless™ Temperature
Control
With Frigidaire’s reputation for durability,
easy maintenance, availability of reliable
parts and service you can count on,
you can be sure that you’re getting the
highest-quality performance.
Frigidaire® air conditioners maintain the
preset room temperature so the room
remains comfortable at all times and
helps control energy levels.
frigidaire.com
Packaged Terminal Air Conditioner (PTAC)
Air Conditioner / Electric Heater
FRP15ETT2R
Performance
BTU (Cool)
15,000 / 14,600
BTU (Electric Heater)
17,000 / 13,900
Dehumidification (Pints / Hour)
3.5
Cool Area (Sq. Ft.)
875
Energy Efficiency Ratio
9.7 / 9.8
PTAC Nomenclature
F
R
Amps (Cool)
Amps (Electric Heater)
Watts (Cool)
Watts (Electric Heater)
Cable Included
RAC P-TAC Models
Frigidaire Baseline
6.7 / 7.5
1,530 / 1,510
5,000 / 4,087
Yes
5.5'
30A
Plug Type (NEMA)
LCDI (6-30P)
Ready-Select® Controls
Front Desk Control Ready
Yes
Fan Speeds (Cool / Fan / Heat)
3 / 3 / 3
BTU
77=7,700
90=9,000
12=12,000
15=15,000
Yes
Low Voltage Start-Up
Yes
Random Restart Protection
Yes
Effortless™ Auto Freeze Protection
Yes
Energy Save
Yes
24-Hour On / Off Timer
Yes
Air CFM (High / Med / Low)
315 / 295 / 275
Air Direction Control
Auxiliary 2-Way
Air Intake
Fresh or Recycled
Filter Type
Nylon Mesh
Filter Access
Slide-Out
Fin Coating
Normal
Slide-Out Chassis
Yes
Commercial Grade Warranty1
Yes
UL, CUL & CSA
Performance
AHRI & CEC
R
Platform
Heat Type
E=Electric
P= Heat Pump
R= Normal no accessories
A=Seacoast no accessories
S= Normal w/ accessories
B= Seacoast w/ accessories
A
Certifications
Safety Certification
2
Design Year
T=2010
U=2011
Y=2016
Noise Level Indoors (High / Med / Low) 53 / 52 / 51
Quiet Start-Up
T
Voltage
2=230/208V
3=265V
Features
Electronic Controls
T
PTAC
21.5 / 20.5
Circuit Breaker
E
Room
230 / 208
Length of Power Cord
90
Frigidaire
Electrical
Volts
P
Specifications
Refrigerant
R410a
Charge
38.10 oz.
Shipping Weight (Approx.)
141 Lbs.
C
B
Warranty 5 year sealed system / 1 year full parts and labor.
1
Plug Type (NEMA)
6-30P
NOTE: For planning purposes only. Always consult
local and national electric codes. Refer to Product
Installation Guide for detailed installation instructions
on the web at frigidaire.com.
Product Dimensions
Wall Cutout Dimensions
A - Height
16"
Height
16-5/16"
B - Width
42"
Width
42-3/16"
C - Depth
13-13/16"
Max. Wall Thickness
13-13/16"2
Unless the PTAC unit is installed with a wall sleeve.
2
Accessories information available
on the web at frigidaire.com
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-866-942-1567 • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-866-942-1567 • frigidaire.ca
FRP15ETT2R 01/16
© 2016 Electrolux Home Products, Inc.
Specifications
subject to change.
Packaged Terminal Air Conditioner (PTAC)
FRP15ETT2R
Air Conditioner / Electric Heater
Rearward Slope
Wall Sleeve
Adapter
1/4" Slope
Accessory
Outdoor Grille
Front Panel
Accessory
Wall Sleeve
Outside Wall
Inside Wall
Chassis
Product Dimensions
Wall Cutout Dimensions
Height
16"
Height
16-5/16"
Width
42"
Width
42-3/16"
Depth
13-13/16"
Max. Wall Thickness
13-13/16"
Plug Type (NEMA)
6-30P
PTAC Specifications
Replacement Installation
•Product Shipping Weight (approx.) – 141 Lbs.
•An electrical supply with grounded three-prong receptacle is required.
•When replacing existing PTAC with new unit, refer to Product
The power supply circuit must be installed in accordance with current
edition of National Electrical Code (ANSI/NFPA 70)
and local codes & ordinances.
•Voltage Rating – 230V / 208V / 60 Hz / 30 Amps
•Amps @ 230/208V Volts = (Cool) 6.7 / 7.5 Amps / (Electric Heater) 21.5 / 20.5 Amps
•Always consult local and national electric codes.
•Recommended Circuit Breaker – 30 Amps
•Unit equipped with 230/208V 3-wire power supply cord, NEMA plug
type 6-30P, approximately 66" long.
•In order for condensate water to drain properly inside the unit, the
sleeve must be installed properly: Level from right to left with a slight
1/4" rearward pitch from the indoor side to the outdoor side as shown in
the illustration above. Refer to the Installation Instructions on the web.
•The drain kit listed on the Frigidaire® PTAC Accessories page can
be used for an internal or external drain. This applies to new and
replacement installation.
Installation Guide on web to identify existing wall-sleeve manufacturer
and size compatibility. If proper installation and slope are suspect,
then correct installation of Frigidaire® PTAC Sleeve options
recommended.
•For any sleeve retrofit application, be sure that the foam seals
(factory-installed on the tube sheets) provide a good seal between
the grille and the outdoor coil tube sheets. These foam seals provide
a barrier that stops air from the inside mixing with air on the outside
(known as air recirculation).
•Using Frigidaire® wall sleeve with Non-Frigidaire grille requires
installation of an Accessory Baffle Kit, which ensures a good seal
between the unit and exterior grille to prevent air recirculation. Air
recirculation is a large contributor to performance loss and premature
damage to major components.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
*See Frigidaire® PTAC accessories pages attached for optional accessories.
New Installation
•For new installation, Frigidaire® PTAC Sleeves are available and
recommended for proper installation. See accessories pages for
sleeve options.*
•Standard PTAC installation requires 13-13/16" maximum wall thickness,
unless a wall sleeve is used.
•If the PTAC unit protrudes more than 4", then it is suggested that it be
installed with a subbase. See accessories pages for subbase options.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-866-942-1567 • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-866-942-1567 • frigidaire.ca
FRP15ETT2R 01/16
© 2016 Electrolux Home Products, Inc.
Specifications
subject to change.
Packaged Terminal
Air Conditioner (PTAC)
ACCESSORIES
Metal Wall Sleeves and Accessories
Polymer Wall Sleeves
The electro-galvanized steel used to make this metal sleeve resists
corrosion. The white powder coating matches the color of the Frigidaire®
PTAC. Sliding keyhole grille attachments at the back enable easy, oneperson installation from the inside.
The universal polymer wall sleeve utilizes fiberglass reinforced
polyester compound to produce a durable, non-corrosive, wall case
that provides superior sound absorption, reduces heat loss, and
prevents sleeve sweating.
5304482701 — Steel Wall Sleeve, Insulated
5308815302 — Polymer Wall Sleeve, Insulated
5308815301 — Polymer Wall Sleeve, Non-Insulated
This extended width wall sleeve is fully insulated and made of
galvanized steel. It is welded and protected with baked-on enamel.
Welded areas are protected with a sealing compound to prevent rust.
5304483759 — Metal Wall Sleeve Extension, Insulated, 16"
5308815304 — Metal Wall Sleeve Extension, Insulated, 18"
5308815305 — Metal Wall Sleeve Extension, Insulated, 24"
5304483760 — Metal Wall Sleeve 3" Adapter
Polymer Grilles
The polymeric architectural outdoor grille blends with most building
exteriors. Its durable design offers protection, has an enhanced
appearance and provides superior weather resistance.
5308815310 — Polymer Architectural Outdoor Grille, Brown
5308815312 — Polymer Architectural Outdoor Grille, Alpine
Aluminum Grilles
The extruded aluminum outdoor grille will enhance the appearance
of any building. The grilles are made of a durable, anodized aluminum
that resists weather. Installs easily onto the Frigidaire® metal wall
sleeve, thanks to the sliding keyhole attachment.
5304480558 — Architectural Aluminum Outdoor Grille, Clear
5308815313 — Architectural Aluminum Outdoor Grille, Dark Brown
530448055X — Architectural Aluminum Outdoor Grille,
Customized Color
5304480557 — Stamped Aluminum Outdoor Grille, Clear
5304484585 — Baffle Kit
Universal Drain Kit
The condensate drain kit is used to control condensate water from
the packaged terminal unit. This universal drain kit can be used for
exterior or interior drain systems.
5304480570 — Condensation Universal Drain Kit, 1 Pack
FR_PTAC_ACC 01/16
Packaged Terminal
Air Conditioner (PTAC)
ACCESSORIES
Air Filters
Electrical Subbases
In order to ensure a healthy room environment the air filters should be
changed periodically. By changing the air filters, airflow, temperature
control and energy efficiency is maintained.
The electrical subbase provides the same features as the non-electrical
subbase, plus a factory-installed electrical junction box containing a
receptacle for corded packaged terminal air conditioner units.
5304482892 — Air Filters, 10 Pack
5304482886 — Electrical Subbase-230V-15A, Black
5304482887 — Electrical Subbase-230V-20A, Black
5304482888 — Electrical Subbase-230V-30A, Black
5304482889 — Electrical Subbase-265V-15A, Black
5304482890 — Electrical Subbase-265V-20A, Black
5304482891 — Electrical Subbase-265V-30A, Black
5304482698 — Subbase Disconnect Switch, 265V
Decorative Subbases & Supports
The non-electrical subbase is made of heavy gauge steel to provide
support for the wall sleeve. The subbase is designed to mount directly
to the wall sleeve. Leveling legs attach easily to the wall sleeve and
offer accurate leveling and support for units.
5308815315 — Decorative Subbase, Black
5304480575 — Leveling Legs
Wired Digital Wall Thermostats
With the Effortless™ Temperature Control wired wall thermostat,
comfort and precision is in your hands. Programmable or nonprogrammable, this thermostat offers auto-changeover, 2-stage
heating and cooling, as well as emergency heating mode
(for Heat Pump).
5304482700 — Wired Digital Wall Thermostat, Programmable
5304483050 — Wired Digital Wall Thermostat, Non-Programmable
5304484139 — Transfer Cable (For Quick Programming of
Wired Thermostats)
Wireless Wall Thermostats
The wireless Effortless™ Temperature Control wall thermostat allows
control without having to worry about wiring. Easy to install and easy
to use. Large intuitive LCD screen improves the user interaction.
5304482699 — Wireless Digital Thermostat, Non-Programmable
5304482XXX — Wireless Receiver1
FR_PTAC_ACC 01/16
Wireless Receiver required for Wireless Wall Thermostat for all new installations.
1 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising