Fire Alarm Ancillaries Brochure
fire alarm
ORDER CODES
BF318
Remote LED indicator, supplied on a single gang plate
Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit
BF376
24V 5A relay on a plate, supplied on a single gang plate
Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices
BF367
Keyswitch operated device isolator, supplied on a single gang plate
Allows a 24V d.c. output from a fire panel to be remotely isolated
BF366
24V 5A isolatable relay on a plate, supplied on a single gang plate
Combines the functions of the BF376 5A relay and BF367 device isolator in one unit
FF502P
Four zone monitored sounder extender, supplied on a double gang plate
Provides 4 extra sounder circuits with o/c & s/c monitoring, 2 trigger inputs, 1 fault output
BF363
Vibrating pillow pad c/w locking jack plug and 2m lead (requires 1 x BF364)
Designed for use under pillows to warn the hard of hearing of a fire condition
BF364
Wall-mounting single gang jack socket for BF363
Can be connected to a standard 24V (max 27V) fire alarm sounder circuit
XFP508X
BS5839-6 Hush Button (Apollo version), supplied on a double gang plate
Interfaces to an Apollo XP95 analogue loop to provide a two minute silence facility to
BS 5839-6 inside individual flats or apartments - contact our sales desk for full details
XFP508H
BS5839-6 Hush Button (Hochiki version), supplied on a double gang plate
Interfaces to an Hochiki analogue loop to provide a two minute silence facility to
BS 5839-6 inside individual flats or apartments - contact our sales desk for full details
BF375P
24V 250mA unregulated door release PSU, supplied on a double gang plate
BF375PK
24V 250mA unregulated door release PSU kit, includes PSU & 1 x electromagnetic retainer
BF360BOX
Ancillary equipment box, plastic (external size 380 x 235 x 90 mm)
BF361BOX
Ancillary equipment box, plastic/metal (external size 465 x 290 x 103 mm)
BF362BOX
Ancillary equipment box, metal (external size 404 x 404 x 110 mm)
BF360LEDKIT
6-way Status LED kit for BF360BOX, BF361BOX or BF362BOX
NCP-8
White 35mm flush mount UK single gang back box
NCP-9
White 25mm surface mount UK single gang back box
NCP-10
White 35mm flush mount UK double gang back box
NCP-11
White 25mm surface mount UK double gang back box
ALSO AVAILABLE FROM C-TEC
A NEW RANGE OF EN54-4 COMPLIANT
SWITCH MODE POWER SUPPLY UNITS
contact our sales desk for details
Manufactured by C-TEC, Stephens Way, Wigan, WN3 6PH. England
Quality System Certificate No: 176
Assessed to ISO9001 : 1994
UK Sales: Tel: 01942 322744. Fax: 01942 829867. Email: sales@c-tec.co.uk
European Sales: Tel: +44 1942 322744. Fax: +44 1942 829867. Email: eu.exports@c-tec.co.uk
Export Sales: Tel: +44 161 257 2541. Fax: +44 161 225 8817. Email: xportsales@xportsales.com
© C-TEC Errors and omissions excepted. C-TEC operates a policy of continuous improvement and we reserve the right to alter
product specifications at our discretion and without prior notice. Approved Document No. DFS0318017 Rev 1
BF318 REMOTE LED INDICATOR
A low-cost remote indicator
incorporating a red LED. Ideal for
indicating the activation of out-of-sight
smoke or heat detectors (in lift shafts,
hotel bedrooms, etc.) or fire alarm
sounder circuits. Three inputs are
provided ‘OV’, ‘+30V d.c’ and ‘LED only’.
If connecting to a current limited source
such as a detector the ‘OV’ and ‘LED only’ inputs should be
used. If connecting to a non-current limited source such as a
fire alarm sounder circuit the ‘0V’ and ‘+30V d.c’ inputs
should be used. Mounts on 16mm UK single gang back boxes.
fire alarm
A range of durable, reliable and cost-effective fire alarm ancillaries suitable for use with most
manufacturers’ fire alarm control panels
From low-cost remote LED indicators and general purpose relays to four zone sounder circuit
extenders, vibrating pads and ancillary equipment boxes, C-TEC’s fire alarm ancillaries are among
the most-respected in the industry.
With thousands of units already installed - all fully compliant with the relevant British and
European Standards - you can rest-assured C-TEC’s ancillaries will serve as reliable, practical and
quality additions to any fire alarm or life safety system.
CURRENT RATING 'OV' & '+30V MAX': 10mA @ 30V d.c. (Max)
CURRENT RATING 'OV' & '+30V MAX': 1.3mA @ 6V d.c. (Min)
CURRENT RATING '0V' & 'LED ONLY': dependent on detector used
BF376 24V 5A GENERAL PURPOSE RELAY ON A PLATE
A cost-effective double-pole, polarised
changeover relay that is capable of
switching loads of up to 240V a.c at 5A.
Incorporating a red LED which
illuminates when the relay is active, the
BF376 may be connected to a suitable
control panel relay output or a standard
polarised sounder circuit to operate
door retaining magnets, rollershutter doors, etc*. Mounts on
25mm UK single gang back boxes.
INPUT COIL VOLTAGE RANGE: 18 - 30 V d.c.
CURRENT CONSUMPTION: typically 30mA @ 24V d.c. (relay active)
CONTACT RATING @ 24V d.c: 5A (resistive) 2A (inductive)
CONTACT RATING @ 240V a.c: 5A (resistive) 2A (inductive)
* Always check this arrangement is acceptable with the approving authority
BF367 KEYSWITCH OPERATED DEVICE ISOLATOR
BF366 24V 5A KEYSWITCH ISOLATABLE RELAY
A useful isolating device that allows a
+24V d.c. output from a fire panel to be
temporarily cut-off to prevent external
equipment (such as autodiallers,
rollershutter doors, etc) from operating.
Incorporating an isolating keyswitch and
amber LED, the unit helps safeguard
against the inadvertent triggering of
auxiliary equipment during routine maintenance. If the
output controlled is monitored, a fault condition will show at
the host panel when the keyswitch is ‘ISOLATED’. Mounts on
25mm UK single gang back boxes.
Combines the functions of the BF376
general purpose 5A relay (above) and
the BF367 keyswitch operated device
isolator (left) in a single unit. Includes a
double-pole relay capable of switching
loads of up to 240V a.c at 5A and a
keyswitch isolation facility that allows
the relay operation to be temporarily
disabled during routine test and maintenance. Mounts on
25mm UK single gang back boxes.
REQUIRED CURRENT FOR AMBER FAULT LED: 10mA @ 27.6V d.c.
NON-SWITCHING CURRENT RATING: 5A Absolute
MAX. SWITCHING LOAD (RESISTIVE): 3A @ 30V D.C.
MAX. SWITCHING LOAD (INDUCTIVE): 1.5A @ 30V d.c.
CONTACT CONFIGURATION: Double pole changeover
INPUT COIL VOLTAGE RANGE: 17 - 30 V d.c.
CURRENT CONSUMPTION: typically 30mA @ 24V d.c. (relay active)
CONTACT RATING @ 24V d.c: 5A (resistive) 2A (inductive);
CONTACT RATING@ 240V a.c: 5A (resistive) 2A (inductive)
FF502P FOUR ZONE SOUNDER CIRCUIT EXTENDER
XFP508X/H BS5839-6 HUSH BUTTON
Compatible with most fire
alarm panels, the FF502P can be
connected to any unpopulated
sounder circuit to provide four
extra sounder circuits with
open and short circuit
monitoring, two trigger inputs
and one fault output. The four
extra circuits can be set to operate as two pairs and can be
triggered separately to provide 'zonal' fire outputs, monitored
relay circuits or class change facilities. The fault output trigger
can be used to drive external indicators or switch a relay via a
transistor. Mounts on 25mm UK double gang back boxes.
SUPPLY VOLTAGE: 15-30V DC.; Quiescent drain: @27V <5mA
TOTAL OUTPUT CURRENT: to be no greater than 1A.
MAX CURRENT PER CIRCUIT: 400mA.
A BS5839-6 compliant fire
alarm solution for houses of
multiple occupation. Designed
to sit on an Apollo or Hochiki
analogue addressable loop,
each Hush Button has its own
conventional detector circuit,
conventional sounder circuit
and onboard loop isolator. Provides each flat or apartment
with a two-minute silence facility and 15 minute isolate facility
(to BS5839-6/12/2), putting occupants firmly in control of their
own fire alarm system and providing a level of fault
monitoring that is not possible with domestic detectors.
For further details, contact your supplier for a copy of our
dedicated Hush Button leaflet.
ANCILLARY EQUIPMENT BOXES
A range of robust wall-mountable storage boxes that can be
used for housing all kinds of auxiliary electronic equipment from batteries and relays to timers and control switches.
An invaluable storage solution for specialist installers of all
disciplines, the choice of boxes available makes them ideal for
use in dozens of applications.
An optional six-way LED indicator board is also availabe
(order code BF360LEDKIT). This can be mounted inside each
variant for interfacing to equipment inside the box and
relaying key system status information to the user.
The range comprises:BF360BOX
380 x 235 x 90mm (plastic enclosure)
BF361BOX
465 x 290 x 103mm (plastic/metal enclosure)
BF362BOX
404 x 404 x 110mm (metal enclosure)
BF363 VIBRATING PAD
BF375P 24V 250mA UNREGULATED DOOR RELEASE PSU
A discreet vibrating pillow pad that
can be connected (via the BF364
wall mounting socket) to any
conventional fire alarm sounder
circuit. Typically used to provide
early warning of a potential fire
alarm condition to the hard of
hearing, the unit measures just
97mm diameter, 34mm deep and includes a 2m connection
cable. The pad is not designed for continuous use and should
not be left running for prolonged periods without being reset.
One BF364 wall mounting socket is required per BF363.
A compact double gang power
supply providing a continuous
output of 24V 250mA d.c.
Ideal for locating alongside
fire doors requiring door
retaining magnets, three
trigger methods are available ‘trigger’, ‘hold off’ and
manual button. Once triggered, the PSU’s output voltage is
removed causing any door release magnets connected to it
to de-energise. The BF375P is also available as part of the
BF375PK door retainer and PSU kit. Mounts on 25mm UK
double gang back boxes.
OPERATING VOLTAGE: 24V nominal. 27V max.
OPERATING CURRENT: 120mA nominal. 160mA max.
DIMENSIONS: 97mm diameter, 34mm thick. 150gms.
SUPPLY IN: 230Va.c. – 10% @50/60 Hz; Max Current: 45 mA
SUPPLY OUT: 21-28V d.c. 250mA; Max. Retainers: 5 @ 50mA
BF318 REMOTE LED INDICATOR
A low-cost remote indicator
incorporating a red LED. Ideal for
indicating the activation of out-of-sight
smoke or heat detectors (in lift shafts,
hotel bedrooms, etc.) or fire alarm
sounder circuits. Three inputs are
provided ‘OV’, ‘+30V d.c’ and ‘LED only’.
If connecting to a current limited source
such as a detector the ‘OV’ and ‘LED only’ inputs should be
used. If connecting to a non-current limited source such as a
fire alarm sounder circuit the ‘0V’ and ‘+30V d.c’ inputs
should be used. Mounts on 16mm UK single gang back boxes.
fire alarm
A range of durable, reliable and cost-effective fire alarm ancillaries suitable for use with most
manufacturers’ fire alarm control panels
From low-cost remote LED indicators and general purpose relays to four zone sounder circuit
extenders, vibrating pads and ancillary equipment boxes, C-TEC’s fire alarm ancillaries are among
the most-respected in the industry.
With thousands of units already installed - all fully compliant with the relevant British and
European Standards - you can rest-assured C-TEC’s ancillaries will serve as reliable, practical and
quality additions to any fire alarm or life safety system.
CURRENT RATING 'OV' & '+30V MAX': 10mA @ 30V d.c. (Max)
CURRENT RATING 'OV' & '+30V MAX': 1.3mA @ 6V d.c. (Min)
CURRENT RATING '0V' & 'LED ONLY': dependent on detector used
BF376 24V 5A GENERAL PURPOSE RELAY ON A PLATE
A cost-effective double-pole, polarised
changeover relay that is capable of
switching loads of up to 240V a.c at 5A.
Incorporating a red LED which
illuminates when the relay is active, the
BF376 may be connected to a suitable
control panel relay output or a standard
polarised sounder circuit to operate
door retaining magnets, rollershutter doors, etc*. Mounts on
25mm UK single gang back boxes.
INPUT COIL VOLTAGE RANGE: 18 - 30 V d.c.
CURRENT CONSUMPTION: typically 30mA @ 24V d.c. (relay active)
CONTACT RATING @ 24V d.c: 5A (resistive) 2A (inductive)
CONTACT RATING @ 240V a.c: 5A (resistive) 2A (inductive)
* Always check this arrangement is acceptable with the approving authority
BF367 KEYSWITCH OPERATED DEVICE ISOLATOR
BF366 24V 5A KEYSWITCH ISOLATABLE RELAY
A useful isolating device that allows a
+24V d.c. output from a fire panel to be
temporarily cut-off to prevent external
equipment (such as autodiallers,
rollershutter doors, etc) from operating.
Incorporating an isolating keyswitch and
amber LED, the unit helps safeguard
against the inadvertent triggering of
auxiliary equipment during routine maintenance. If the
output controlled is monitored, a fault condition will show at
the host panel when the keyswitch is ‘ISOLATED’. Mounts on
25mm UK single gang back boxes.
Combines the functions of the BF376
general purpose 5A relay (above) and
the BF367 keyswitch operated device
isolator (left) in a single unit. Includes a
double-pole relay capable of switching
loads of up to 240V a.c at 5A and a
keyswitch isolation facility that allows
the relay operation to be temporarily
disabled during routine test and maintenance. Mounts on
25mm UK single gang back boxes.
REQUIRED CURRENT FOR AMBER FAULT LED: 10mA @ 27.6V d.c.
NON-SWITCHING CURRENT RATING: 5A Absolute
MAX. SWITCHING LOAD (RESISTIVE): 3A @ 30V D.C.
MAX. SWITCHING LOAD (INDUCTIVE): 1.5A @ 30V d.c.
CONTACT CONFIGURATION: Double pole changeover
INPUT COIL VOLTAGE RANGE: 17 - 30 V d.c.
CURRENT CONSUMPTION: typically 30mA @ 24V d.c. (relay active)
CONTACT RATING @ 24V d.c: 5A (resistive) 2A (inductive);
CONTACT RATING@ 240V a.c: 5A (resistive) 2A (inductive)
FF502P FOUR ZONE SOUNDER CIRCUIT EXTENDER
XFP508X/H BS5839-6 HUSH BUTTON
Compatible with most fire
alarm panels, the FF502P can be
connected to any unpopulated
sounder circuit to provide four
extra sounder circuits with
open and short circuit
monitoring, two trigger inputs
and one fault output. The four
extra circuits can be set to operate as two pairs and can be
triggered separately to provide 'zonal' fire outputs, monitored
relay circuits or class change facilities. The fault output trigger
can be used to drive external indicators or switch a relay via a
transistor. Mounts on 25mm UK double gang back boxes.
SUPPLY VOLTAGE: 15-30V DC.; Quiescent drain: @27V <5mA
TOTAL OUTPUT CURRENT: to be no greater than 1A.
MAX CURRENT PER CIRCUIT: 400mA.
A BS5839-6 compliant fire
alarm solution for houses of
multiple occupation. Designed
to sit on an Apollo or Hochiki
analogue addressable loop,
each Hush Button has its own
conventional detector circuit,
conventional sounder circuit
and onboard loop isolator. Provides each flat or apartment
with a two-minute silence facility and 15 minute isolate facility
(to BS5839-6/12/2), putting occupants firmly in control of their
own fire alarm system and providing a level of fault
monitoring that is not possible with domestic detectors.
For further details, contact your supplier for a copy of our
dedicated Hush Button leaflet.
ANCILLARY EQUIPMENT BOXES
A range of robust wall-mountable storage boxes that can be
used for housing all kinds of auxiliary electronic equipment from batteries and relays to timers and control switches.
An invaluable storage solution for specialist installers of all
disciplines, the choice of boxes available makes them ideal for
use in dozens of applications.
An optional six-way LED indicator board is also availabe
(order code BF360LEDKIT). This can be mounted inside each
variant for interfacing to equipment inside the box and
relaying key system status information to the user.
The range comprises:BF360BOX
380 x 235 x 90mm (plastic enclosure)
BF361BOX
465 x 290 x 103mm (plastic/metal enclosure)
BF362BOX
404 x 404 x 110mm (metal enclosure)
BF363 VIBRATING PAD
BF375P 24V 250mA UNREGULATED DOOR RELEASE PSU
A discreet vibrating pillow pad that
can be connected (via the BF364
wall mounting socket) to any
conventional fire alarm sounder
circuit. Typically used to provide
early warning of a potential fire
alarm condition to the hard of
hearing, the unit measures just
97mm diameter, 34mm deep and includes a 2m connection
cable. The pad is not designed for continuous use and should
not be left running for prolonged periods without being reset.
One BF364 wall mounting socket is required per BF363.
A compact double gang power
supply providing a continuous
output of 24V 250mA d.c.
Ideal for locating alongside
fire doors requiring door
retaining magnets, three
trigger methods are available ‘trigger’, ‘hold off’ and
manual button. Once triggered, the PSU’s output voltage is
removed causing any door release magnets connected to it
to de-energise. The BF375P is also available as part of the
BF375PK door retainer and PSU kit. Mounts on 25mm UK
double gang back boxes.
OPERATING VOLTAGE: 24V nominal. 27V max.
OPERATING CURRENT: 120mA nominal. 160mA max.
DIMENSIONS: 97mm diameter, 34mm thick. 150gms.
SUPPLY IN: 230Va.c. – 10% @50/60 Hz; Max Current: 45 mA
SUPPLY OUT: 21-28V d.c. 250mA; Max. Retainers: 5 @ 50mA
fire alarm
ORDER CODES
BF318
Remote LED indicator, supplied on a single gang plate
Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit
BF376
24V 5A relay on a plate, supplied on a single gang plate
Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices
BF367
Keyswitch operated device isolator, supplied on a single gang plate
Allows a 24V d.c. output from a fire panel to be remotely isolated
BF366
24V 5A isolatable relay on a plate, supplied on a single gang plate
Combines the functions of the BF376 5A relay and BF367 device isolator in one unit
FF502P
Four zone monitored sounder extender, supplied on a double gang plate
Provides 4 extra sounder circuits with o/c & s/c monitoring, 2 trigger inputs, 1 fault output
BF363
Vibrating pillow pad c/w locking jack plug and 2m lead (requires 1 x BF364)
Designed for use under pillows to warn the hard of hearing of a fire condition
BF364
Wall-mounting single gang jack socket for BF363
Can be connected to a standard 24V (max 27V) fire alarm sounder circuit
XFP508X
BS5839-6 Hush Button (Apollo version), supplied on a double gang plate
Interfaces to an Apollo XP95 analogue loop to provide a two minute silence facility to
BS 5839-6 inside individual flats or apartments - contact our sales desk for full details
XFP508H
BS5839-6 Hush Button (Hochiki version), supplied on a double gang plate
Interfaces to an Hochiki analogue loop to provide a two minute silence facility to
BS 5839-6 inside individual flats or apartments - contact our sales desk for full details
BF375P
24V 250mA unregulated door release PSU, supplied on a double gang plate
BF375PK
24V 250mA unregulated door release PSU kit, includes PSU & 1 x electromagnetic retainer
BF360BOX
Ancillary equipment box, plastic (external size 380 x 235 x 90 mm)
BF361BOX
Ancillary equipment box, plastic/metal (external size 465 x 290 x 103 mm)
BF362BOX
Ancillary equipment box, metal (external size 404 x 404 x 110 mm)
BF360LEDKIT
6-way Status LED kit for BF360BOX, BF361BOX or BF362BOX
NCP-8
White 35mm flush mount UK single gang back box
NCP-9
White 25mm surface mount UK single gang back box
NCP-10
White 35mm flush mount UK double gang back box
NCP-11
White 25mm surface mount UK double gang back box
ALSO AVAILABLE FROM C-TEC
A NEW RANGE OF EN54-4 COMPLIANT
SWITCH MODE POWER SUPPLY UNITS
contact our sales desk for details
Manufactured by C-TEC, Stephens Way, Wigan, WN3 6PH. England
Quality System Certificate No: 176
Assessed to ISO9001 : 1994
UK Sales: Tel: 01942 322744. Fax: 01942 829867. Email: sales@c-tec.co.uk
European Sales: Tel: +44 1942 322744. Fax: +44 1942 829867. Email: eu.exports@c-tec.co.uk
Export Sales: Tel: +44 161 257 2541. Fax: +44 161 225 8817. Email: xportsales@xportsales.com
© C-TEC Errors and omissions excepted. C-TEC operates a policy of continuous improvement and we reserve the right to alter
product specifications at our discretion and without prior notice. Approved Document No. DFS0318017 Rev 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising