operations guide tips
OPERATIONS GUIDE
BUTTON PRESS
LIGHT INDICATORS
AUDIO INDICATORS
TURN ON
MODES OF OPERATION
MFB - 3 second press
Blue flashes
2 notes rising, followed by short
tone when Bluetooth
connected
TURN OFF
MFB - 4 second press
Red flashes
2 notes falling, followed by short
tone when Bluetooth disconnected
PAIRING
MFB - 6 second press
Blue quickly flashing
2 notes rising, followed by 4 notes
rising
ON - NO BLUETOOTH CONNECTION
NA
Blue double blink
NA
ON - BLUETOOTH CONNECTED
NA
Blue flashing slowly
NA
MAKE A CALL
Dial from keypad or use Voice Dial
NA
NA
MFB: 1 tap
NA
2 notes falling
MFB: 1 tap during ring tone
NA
2 notes rising
MFB: 1 tap
NA
1 beep
REJECT A CALL
MFB: 1 second press during ring
tone
NA
2 notes falling
LAST NUMBER REDIAL
1 second press of Volume Down
button
NA
1 beep
END A CALL
ANSWER A CALL
VOICE DIAL - ACTIVATE / DEACTIVATE
CALL WAITING - ANSWER / SWITCH BETWEEN CALLS
MFB: 2 quick taps
NA
Beep heard when call is incoming
MFB: 1 tap to end active call. Tap
once again to answer call on hold.
Tap once more to disconnect
second caller
NA
Call on hold will ring the headset
after the active call
is disconnected
1 second press of Volume Down
button
NA
1 Long tone
MFB: 1 second press
NA
Long tone
Tap Volume Up or Volume Down
button
NA
1 beep each time tapped
1 second press of Volume Up
button
NA
1 beep. Short beep every 10
seconds while muted
TURN LEDS (LIGHTS) OFF / ON
Tap Volume Up and Volume Down
buttons at the same time
Lights go out
NA
MULTIPOINT CONNECTION * - ENABLE
Tap MFB, Volume Up and Volume
Down buttons all at the same time
NA
4 notes rising
MFB: 1 tap
Blue flashing slowly
NA
CALL WAITING - END CALLS
TRANSFER AUDIO WHILE ON A CALL
SEND CALL ON HOLD TO VOICE MAIL
VOLUME UP / VOLUME DOWN
MUTE / UNMUTE
REESTABLISH LOST BLUETOOTH CONNECTION WITH
PHONE (PHONE IS ALREADY PAIRED AND TURNED ON)
LOW BATTERY WARNING
NA
Red flashes
Long tone / 30 sec.
CHARGING IN PROCESS
NA
Red (not flashing)
NA
CHARGING COMPLETE
NA
Green (not flashing)
NA
* A Multipoint Connection allows connection of two devices to the headset at the same time. For example, this could be two cell phones, or a phone and a VoIP dongle.
TIPS
Keep microphone positioned near the corner of your mouth. Correct positioning ensures that the noise-canceling
technology works properly.
= If you have not used the headset for an extended period, charge the headset for 3½ hours before using.
=
HOW TO REPLACE THE AUTO CHARGER FUSE
If the green indicator light on the auto adapter (located next to the USB port) does not light up when plugged into the
power source, check the charger’s inline fuse. Replace with 2A 250V Fast-Blow glass fuse (3AG) if necessary. Fuses are
available at most automotive stores. To replace, unscrew the tip of the auto adapter (see photo, right) and remove the
fuse. Put new fuse in and screw the tip back on.
Unscrew
Tip
Indicator
Light
FCC NOTICE TO USERS; This part complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved
by VXi Corporation will void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by
one or more of the following measures: - Reorient or relocate the receiving antennae - Increase the separation between the equipment and the receive - Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
CANADA / IC NOTICE TO USER: Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation of the device. This device complies with RSS-210 of Industry Canada. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada).
VXI WARRANTY:
1. VXi warrants that your Xpressway headset system will be free from defects in material and workmanship for one year from the date of purchase. If, during the first year from the date of
purchase, your Xpressway headset system fails to work due to a defect in material or workmanship, VXi will repair or replace the product, at its election, free of charge. Without proof of purchase,
the warranty period begins on the date of manufacture. Consumable components (for example, cushions, battery and fuse) are not included in this one-year warranty.
2. The foregoing limited warranty does not cover equipment failure attributable to accident, improper operation, misuse, abuse, or any cause other than defects in the materials or workmanship
of VXi’s products.
3. VXi’s obligations under this warranty are limited to repair or replacement (at our option) of any defective part returned to VXi at the customer’s expense. Returned products require a Return
Authorization that may be obtained by calling 1-800-742-8588. Products returned to VXi for repair under this warranty will be return shipped to the customer at VXi’s expense.
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not permit the exclusion of implied warranties and the foregoing exclusions may not apply to you.
5. In no event shall VXi be responsible for any other damages whatsoever, including direct, indirect, special, incidental, consequential, or other damages for breach of this or any other warranty,
express or implied.
VXi Corporation, 271 Locust Street, Dover, NH 03820 USA 1-800-742-8588 / 603-742-2888 / www.vxicorp.com / www.blueparrott.com
PN202556C
©2009 VXi Corporation Printed in China
Sold by:
®
Xpressway™
USER GUIDE
http://www.TWAcomm.com
Toll Free: (877) 389-0000
1.
2.
9.
6.
Convertible!
3 wearing
styles
3.
4.
Compatible with most Bluetooth phones & Bluetooth
enabled computers (Windows® or Macintosh®)
7.
8.
11.
5.
COMPONENTS
10.
1. Behind-the-Neck Headband
2. Over-the-Head Headband
3. Ear Cushion Mounting Disks (2 sizes)
TALK TIME AND RANGE
4. Leatherette Ear Cushions (2 sizes)
5. Foam Ear Cushions (2 sizes)
Range: Up to 66 feet. Certain conditions
and obstructions, such as wireless
devices, placing the phone on a metal
surface (such as the hood of a car),
walls, etc. can reduce range.
Talk Time Duration: 16+ hrs on a full charge
Standby Time Duration: Up to 150 hours
on a full charge
Multifunction Button
(MFB)
6. Xpressway™ Headset
7. Ear Hook
Volume Up Button
8. Receiver Cover
Volume Down Button
9. USB Cord
10. Auto Charger
11. Wall Charger
USB Charging Port
SAFETY INSTRUCTIONS
=
Avoid hearing damage. Set volume at lowest comfortable
CHARGE THE HEADSET
Refer to photos above
=
level. If you experience ringing in your ears or people sound
muffled, stop using the headset. Avoid turning up volume
=
to block noisy surroundings (it’s possible to adapt to volume
that is too high).
=
Check with local and state laws regarding cell phone
=
Do not immerse any part of this product in water.
handset usage while operating a motor vehicle.
=
Plastic bags and small parts may cause choking if ingested
Keep them away from small children and pets.
=
Use only the power cords included with this product.
=
Avoid temperatures exceeding 140°F.
=
PAIR HEADSET WITH PHONE
=Turn
Connect small end of the USB cord into the
headset’s USB charging port.
Choose Charging Method: Plug other
end of cord into the Auto or AC charger
and then plug the charger into the power
source. Or, to charge the headset on your
computer, plug the USB cord directly into
your computer’s USB port.
An initial overnight charge is recommended.
Afterwards, charge 3½ hours for a full charge.
=
=
=
=
=
off headset.
Place headset and phone within 3 ft. of
each other. Keep other Bluetooth devices
at least 50 feet away or turn them off.
Press the MFB on the headset for about
6 seconds until the blue light flashes
continuously.
Put phone into Bluetooth Discovery Mode
(“Add New Devices”).
Enter pass code of 0000 when prompted.
When the blue light changes from a quick
flash to a slower flash, pairing is complete.
Charging Indicator Lights:
Red Light - Charging in process
Green Light - Fully charged
OVERTHE-HEAD
WEARING
STYLE
If the headband is too tight, pull
ends outward to widen the band.
BEHINDTHE-NECK
WEARING
STYLE
OVERTHE-EAR
WEARING
STYLE
Attach ear hook
Insert matching size disk into cushion.
Attach headband, then cushion.
Attach behind-the-neck headband as shown.
Then attach cushion as described in the overthe-head style.
Optional: Attach
receiver cover for
added stability
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising