Exterior Dot-HP - Martin Professional

Exterior Dot-HP - Martin Professional

Exterior Dot-HP
Martin by HARMAN Exterior Dot-HP is a bright, outdoor-rated dot
designed to create media facades or perimeter lighting on large
buildings and structures for long-distance viewing. This highperformance exterior LED dot for large venues allows for long fixture
runs with variable pixel pitches for flexible designs. A creative tool for
lighting designers, the Exterior Dot-HP is available in two versions –
RGB color mixing or cool white – with a number of front designs for a
variety of unique looks. It is driven by the Martin P3 System
Controller family for easy setup and video display. The Exterior DotHP is also compatible with RDM/DMX for smaller setups.
How processing works for LED video
High-intensity calibrated video dot
G A L L E R Y
Rugged IP66 housing for permanent outdoor installations
Easy setup and long cable runs for clean installation
F E A T U R E S
•
100 lumen per dot calibrated
•
Available in clear front, diffuser dome and directional lens variants
•
RGB or cold white LED engine
•
Flexible mounting system allows for customized solutions
•
Local integral in-built diagnostics tool
•
High-quality 16-bit per color image processing technology
•
Pixel-level brightness and color calibration for optimal image quality
•
P3/RDM/DMX controllable (automatic protocol detection)
•
Intuitive mapping and addressing via P3 System Controller
•
Combined power/data input over single cable
•
Supported by integrated power and data processor (P3 PowerPort 1500
or P3 PowerPort 1000 IP) and simple cabling system
T E CHNI CA L
S P E CI F I CA T I O NS
Physical
Diameter: 72 mm (2.9 in.)
Height: 34 mm (1.4 in.) not including front
Weight, clear front and dome front models: 300 g (0.7 lbs.)
Weight, directional front models: 350 g (0.8 lbs.)
Control and Programming
Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500, Martin
P3™ PowerPort 1000 IP and/or RDM/DMX
Protocol detection: Automatic
Control modes: RGB (RGB variants), white intensity (CW variants), basic
DMX channels: 3/10
Setting and addressing: Martin P3™ System controller or RDM-compliant DMX
controller
Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
Calibration: Color and intensity for each Dot
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Firmware update: Via Martin P3™ System Controller
Control/User Interface
Device status: Multi-color visual indication
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Device test and reset: Magnetic button to call up fixture status and test fixture
Optics
Options
Clear Front
Dome front
Directional front (TIR lens)
LED manufacturer, Exterior Dot-HP RGB: Osram
LED manufacturer, Exterior Dot-HP CW: Seoul
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer’s test conditions:
Photometric Data
Color resolution: 16 bits per color (48 bit per pixel)
Dot pitch: 72 mm - 500 mm (center-to-center)
Viewing angle
Clear front: 103° x 103° (half-peak)
Dome front: 125° x 125° (half-peak)
Directional front: 22° x 22° (half-peak)
RGB Dots
Total output, calibrated mode
Clear front: 90 lumens, 36 cd
Dome front: 62 lumens, 18 cd
Directional front: 72 lumens, 270 cd
Total output, non-calibrated mode
Clear front: 120 lumens, 48 cd
Dome front: 80 lumens, 24 cd
Directional front: 96 lumens, 360 cd
Cool White Dots
Total output, calibrated mode
Clear front: 160 lumens, 62 cd
Dome front: 110 lumens, 32 cd
Directional front: 120 lumens, 590 cd
Total output, non-calibrated mode
Clear front: 210 lumens, 82 cd
Dome front: 142 lumens, 41 cd
Directional front: 160 lumens, 775 cd
Preliminary data, figures are approximate
Video Processing
Brightness control
Gamma correction and control
Color temperature control
Color space control
Calibration processing
Synchronization
Signal Protocol
P3 (via Martin P3™ PowerPort) or RDM/DMX
Construction
Base: Cast aluminum
Color: Electrostatic powder-coated (custom colors available by special order) (custom
colors available on project basis)
Protection rating: IP66
Impact resistance: IK05
Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
RoHS compliant
Installation
Orientation: Any
Mounting points: Direct surface mount, optional mounting plate or optional mounting
profile
Connections
Power and data input: 6-pin custom (BBD) IP66-rated
Power and data thru: 6-pin custom (BBD) IP66-rated
Hot-pluggable
Electrical
Nominal input voltage: 48 VDC +/- 4%
Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Martin™
IP66 PSU or generic 48 VDC PSU
Typical total power consumption, calibrated mode: 5 W at full intensity, full white
Typical total power consumption, uncalibrated mode: 7 W at full intensity, full white
Thermal
Cooling: Convection
Maximum ambient temperature (Ta max.): 55° C (131° F)
Minimum ambient temperature (Ta min.): -20° C (-4° F)
Total heat dissipation (calculated, +/- 10%): 20 BTU/hr.
Approvals
EU safety: EN 60950-1, EN 60950-22
EU EMC: EN 55024, EN 55032 (Class A), EN 61000-3-2, EN 61000-3-3
US safety: UL 60950-1, UL 60950-22
US EMC: FCC Part 15 Class A
Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
Canadian EMC: ICES-003 Class A
Australia/NZ (pending): RCM
Accessories
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Magnetic Test Tool, set of 10: P/N 91610139
Mounting hardware
Flange Plate for Surface Mounting, aluminum, Exterior Dot-HP: P/N 91606020
Mounting Profile Kit incl. dot bracket, screws and lock, Exterior Dot-HP, 57 mm (2.25
in.) : P/N 91606021
Mounting Profile, Exterior Dot-HP / Pixline, 320 mm (12.6 in.): P/N 91611620
Mounting Profile, Exterior Dot-HP / Pixline, 1280 mm (50.4 in.): P/N 91611610
Dot Mounting Bracket for Exterior Dot-HP Mounting Profile: P/N TBA
Mounting Profile Locks, Exterior Dot-HP / Pixline, set of 10: P/N 91611725
Cables
Power + Data Input Cable, 4-pin male XLR (for P3 PowerPort 1500) to fem. BBD, 0.25
m (0.9 ft.): P/N 91616046
Power + Data Input Cable, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25 m
(0.9 ft.): P/N 91616048
Power + Data Input Cable, 5-pin male XLR + male Martin™ IP66 PSU to fem. BBD, 0.25
m (0.9 ft.): P/N 91616050
Power + Data Extension Cable, Installation type CMX, BBD-BBD 1 m (3.3 ft.): P/N
91616055
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5 m (8.2 ft.): P/N
91616056
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 5 m (16.4 ft.): P/N
91616057
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 10 m (32.9 ft.): P/N
91616058
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 25 m (82.1 ft.): P/N
91616059
Power + Data Extension Cable, Installation type CMX, without connectors, 100 m
(328.1 ft.): P/N 91616060
DMX Leadout Adapter, male BBD to 5-pin female XLR, 0.25 m (0.9 ft.): P/N 91616051
Power+Data Adapter XLR5+XLR4-BBD 0.25 m (0.9 ft.): P/N 91616049
Power+Data Adapter BBD-XLR4 0.25 m (0.9 ft.): P/N 91616047
Connectors
Power + Data Cable Connector, BBD, male: P/N 91611750
Power + Data Cable Connector, BBD, female: P/N 91611751
Blanking caps for unused female BBD connectors, set of 10: P/N 91616052
Related Items
Martin P3™ PowerPort 1500: P/N 90721040
Martin P3™ PowerPort 1000 IP Installation: P/N 90721080
Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330
Martin P3-050™ System Controller: P/N 90721090
Martin P3-150™ System Controller: P/N 90721015
Martin P3-300™ System Controller: P/N 90721060
Martin P3-PC™ System Controller: P/N 90721030
Ordering Information
Exterior Dot-HP RGB, Aluminum, Clear Front: P/N 90357683
Exterior Dot-HP RGB, Aluminum, Clear Front, set of 9: P/N 90357697
Exterior Dot-HP RGB, Aluminum, Dome Front: P/N 90357685
Exterior Dot-HP RGB, Aluminum, Dome Front, set of 9: P/N 90357696
Exterior Dot-HP RGB, Aluminum, Directional Front (TIR lens): P/N 90357686
Exterior Dot-HP RGB, Aluminum, Directional Front (TIR lens), set of 9: P/N 90357698
Exterior Dot-HP CW, Aluminum, Clear Front: P/N 90357688
Exterior Dot-HP CW, Aluminum, Clear Front, set of 9: P/N 90357694
Exterior Dot-HP CW, Aluminum, Dome Front: P/N 90357687
Exterior Dot-HP CW, Aluminum, Dome Front, set of 9: P/N 90357695
Exterior Dot-HP CW, Aluminum, Directional Front (TIR lens): P/N 90357689
Exterior Dot-HP CW, Aluminum, Directional Front (TIR lens), set of 9: P/N 90357693
Specifications are preliminary and subject to change without notice
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising