Learning Environments user guide

Learning Environments user guide
Learning Environments user guide:
David Caro-PP207
David Caro-PP207 is a student workshop (BYO laptop), located on the 2nd floor of the Physics
Podium section of the David Caro building on the Parkville campus. It contains the following
equipment:
•
Large LCD monitor
•
Laptop connectivity
•
DVD/VCR player
•
Overhead projector
•
Wireless - more information about wireless at the University of Melbourne here:
http://www.its.unimelb.edu.au/support/networks/wireless
Using the LCD monitor
This remote control controls the LCD monitor.
The remote control is attached to the back of the LCD
monitor.
LCD monitor remote control
Using your laptop
Read the user guide for connecting laptops in learning spaces at:
http://le.unimelb.edu.au/room/laptop.html
The cables to connect your laptop to the projection system are located next to the LCD monitor:
1. Connect the VGA cable to your laptops’ VGA output and the audio cable (if required) to your
laptop’s headphone output.
2. On the LCD monitor remote control, press the ON button to turn on the monitor.
3. On the LCD monitor remote control, press the HD15 button to select your laptop.
4. On the LCD monitor remote control, use the volume controls to adjust volume.
Copyright © The University of Melbourne, July 2012
1
Learning Environments user guide: David Caro-PP207
Playing a DVD
The DVD player is part of a combination DVD/VCR player located next to the LCD monitor.
1. Load your DVD into the DVD player.
2. On the LCD monitor remote control, press the ON button to turn on the monitor.
3. On the LCD monitor remote control, press the VIDEO button to select the DVD/VCR player.
4. Use the DVD/VCR player remote control or the controls on the front of the DVD/VCR player to
play the DVD.
5. On the LCD monitor remote control, use the volume controls to adjust volume.
Playing a video tape
The video player is part of a combination DVD/VCR player located next to the LCD monitor.
1. Load your video tape into the video player.
2. On the LCD monitor remote control, press the ON button to turn on the monitor.
3. On the LCD monitor remote control, press the VIDEO button to select the DVD/VCR player.
4. Use the DVD/VCR player remote control, or the controls on the front of the DVD/VCR player,
to play the DVD.
5. On the LCD monitor remote control, use the volume controls to adjust volume.
Using the overhead projector
Switch on the overhead projector (OHP) using the switch on the front of the unit.
If the OHP does not appear to be working, it may have blown a bulb.
•
Use the globe changing switch located on the front of the OHP to change to the spare globe.
Report any errors or omissions in this user guide to:
les-guides@unimelb.edu.au
The University of Melbourne has used its best endeavours to ensure that material contained in this publication was correct at the time of printing. The
University gives no warranty and accepts no responsibility for the accuracy or completeness of information and the University reserves the right to make
changes without notice at any time in its absolute discretion. Users of this publication are advised to reconcile the accuracy and currency of the
information provided with the relevant department of the University before acting upon or in consideration of the information. Copyright in this publication
is owned by the University and no part of it may be reproduced without the permission of the University
Copyright © The University of Melbourne, July 2012
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising