Catalog 151 , page 156
3 LEVELS OF SAVINGS
Arduino Compatible Development Boards & Accessories
NAME
BRANDS
HOUSE
BRANDS
SPECIAL
BUY
TinyDuino and TinyLily Arduino-Compatible Microcontrollers and Shields
TinyCircuits develops cheap, smart and easy to use sensors based on a shrunk-down Arduino microcontroller. With modules around
1" x 1", you can add LEDs, WiFi, GPS, BT, and even motor control to your project. Use TinyLily for your wearable e-textile projects
with all the power of the LilyPad Arduino at 1/12th the size! See compatibility matrix online for MCU/Shield combinations.
(Conductive thread is P/N 2144489, pg 159)
TinyDuino Main Board and Kits
Part No.
Mfr. Part No.
2211207
2211215
2211223
ASK1001-R-P1-B Basic kit: MCU board w/ battery holder, USB/ISP board, TinyShield Proto 1 and mounting kit
ASK1002-R-LG-B Starter kit: MCU brd w/ battery holder, USB/ISP board, green 16 edge LED shield, Proto 1, 2 & 3, and mounting kit
ASM2001-R
Processor board w/o battery holder. ATmega328P, 8 MHz, 5V. Use proto shields for I/O access.
USB programmer required to upload (P/N 156)
ASM2001-R-B Processor board w/ CR1632 holder. ATmega328P, 8 MHz, 5V. Use proto shields for I/O access.
USB programmer required to upload (P/N 156)
ASH1002
Mounting kit: (4) screws, (4) nuts, (12) spacers. Stack up to 4 TinyDuino boards
2211231
2211506
Description
Size (L" x W")
1
10
0.78 x 0.78
–
0.78 x 0.78
$39.95
59.95
19.95
$37.95
56.95
18.95
0.78 x 0.78
20.95
19.95
–
4.95
4.69
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
1.36 x 1.2
1.36 x 1.2
1.26 x 1.15
0.78 x 1.4
0.78 x 1.1
0.78 x 1.14
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
0.78 x 0.78
$17.95
4.95
4.95
4.95
9.95
12.95
5.49
59.95
59.95
49.95
19.95
14.95
14.95
14.95
14.95
19.95
19.95
14.95
13.95
$16.95
4.69
4.69
4.69
9.49
12.49
5.25
56.95
56.95
46.95
18.95
13.95
13.95
13.95
13.95
18.95
18.95
13.95
13.25
–
–
0.55"Dia.
0.75 x 0.35
0.63 x 0.39
0.39"Dia.
0.28 x 0.16
0.26 x 0.1
0.4 x 0.18
$23.95
42.95
9.95
14.95
3.95
4.95
2.95
1.75
1.75
$22.95
39.95
9.49
13.95
3.75
4.69
2.79
1.49
1.49
2211215
TinyDuino Shields
2211240
2211258
2211266
2211274
2211291
2211303
2211282
2211469
2211493
2211485
2211418
2211426
2211434
2211451
2211442
2211400
2211371
2211346
2211320
ASD2101-R
ASD2002-R
ASD2003-R
ASD2004-R
ASD2005-R-T
ASD2005-R-T-I
ASD2005-R
ASD2121-R
ASD2501-R
ASD2112-R
ASD2301-R
ASD2611-R
ASD2613-R
ASD2201-R
ASD2811-R
ASD2421-R
ASD2413-R-LR
ASD2412-R-LR
ASD2411-R-LA
USB/ISP programmer board: Required to upload sketches. ICP 6-pin connection available.
Proto 1: 2mm spacing, full TinyDuino I/O breakout provides a point you can solder to.
Proto 2: 0.1" spacing, partial TinyDuino I/O breakout, IO0-IO4, AD0-AD5. See Web
Proto 3: 0.1" spacing, partial TinyDuino I/O breakout, IO0-IO9, AD4-AD5. See Web
Proto w/ Terminal Blocks (kit): 0.1" spacing, full breakout with reliable screw terminals.
Proto w/ Terminal Blocks (assembled): 0.1" spacing, full breakout of all I/Os.
Proto w/o Terminal Blocks: 0.1" spacing, full TinyDuino breakout of all I/Os.
WiFi: Ti CC3000 module, 802.11 b/g 2.4 GHz, SPI interface, Active mode: 92mA typ. RX.
GPS: Telit JF2 module, SiRFstar IV, 48-CH, NMEA/OSP, 5V, 1Hz/5Hz. <2.5m accuracy.
Bluetooth LE 4: Bluegiga BLE112, 3.3V/5V, uses D0 & D1 pins. Supports up to 8 connections.
Motor x4: 4x DRV8837 H-bridge, 1.8A max. @ 1.8-11V, 4-CH. Uses pins 2-9 and A3.
Accelerometer: BMA250 3-axis, 1.8V, ±2/4/8/16g, 10-bit resolution. Uses A4 and A5.
Compass: HMC5883L 3-axis, 12-bit ADC, 1° to 2˚ compass heading accuracy. Uses A4 and A5
MicroSD: Allows a µSD card (not included) to be used, 5V. SPI mode and uses pins 10-13.
Ambient Light Sensor: TAOS TSL2572, dual diode and UV-filter, I²C, 3V/5V. Also I²C breakout.
7-Segment Display: 2 digit, 0.26" high, red, I²C, SX1506 I/O expander. Uses A4 & A5 pins
Matrix LEDs: 54 red SMT LEDs in 6x9 grid, uses 8 I/Os (green & amber colors available online)
Circle Edge LEDs, 21 side mount red LED, uses 6 I/Os (green & amber colors available online)
16 Edge LEDs, side/circular mount amber LEDs. Uses 5 I/O (red & green colors available online)
2211240
2211291
TinyLily Main Board, Shields and Kits
2211514
2211522
2211531
2211549
2211565
2211573
2211557
2211602
2211611
ASK2001
ASK2002-R
ASM2101
ASL2111
ASL1201
ASL2001
ASL1101
ASL1001-LG
ASL1002-LR
Basic kit: TinyLily MCU board and Mini USB adapter. LilyPad compatible, (8) I/O sewtabs
Starter kit: 2x TinyLily MCU boards, mini USB adapter, 3mm switch, batt. adapter &1206 LEDs (2 ea. amber, green, red)
Mini processor: 5V ATmega328P, 8 I/O sewtabs (4 D, 4 A/D). Arduino and LilyPad compatible.
Mini USB Adapter: FTDI USB/serial converter for upload. Resistor jumper for 3.3V/5V. 3.3V default
Battery adapter: 2-pin JST-PH connector and 2 solder tabs. Connects to TinyLily.
Motor Board: 1 H-bridge, drive a 1.8A motor @ 1.8-11V/ TI DRV8837 motor driver (H-bridge)
Momentary pushbutton 3mm switch: 2 sewtabs, SPST, NO. Non-corrosive gold finish.
Green LED 0402, sewable and wearable (red available online, P/N 2211581)
Red LED 1206 SMT, sewable and wearable (green and amber colors available online)
2211451
2211531
Rapid Wireless RF Development & Prototyping
Edu & Hobby
Honey, they shrunk the Arduino…and made it wireless! RFduino is an Arduino compatible, high-performance configurable wireless
RF module that allows for fast development and prototyping of projects for the Internet of Things! The powerful RFduino features ARM Cortex M0,
128kB Flash, 2.4GHz transceiver, and Bluetooth 4.0 LE. Shield modules add servo, relay, protoboard, RGB/Button, battery and other capabilities.
Part No.
Mfr. Part No.
Description
2209887
2209895
RFD90101
RFD90102
2209908
RFD90103
2209916
2209924
2209772
2209781
2209852
2209844
2209836
2209861
2209828
2209879
2209799
2209801
RFD90104
RFD90105
RFD22102
RFD22121
RFD22128
RFD22127
RFD22126
RFD22130
RFD22125
RFD22131
RFD22122
RFD22123
2-pc. Development kit: RFduino DIP & USB programming shield
7-pc. Development kit: 2 ea. RFduino DIP & 1 ea. USB, servo, RGB pushbutton, prototyping, and dual
AAA battery shield accessory boards
12-pc. Development kit: 2 ea. RFduino DIP & 1 ea. USB, RGB pushbutton, single & dual AAA bat holder,
CR2032 dual relay, µSD, prototyping, USB & PCB shield accessory boards
16-pc. Dev. kit: Same as P/N 2209908 but has (5) RFduino DIP & 2 USB shields. See Web for details.
30-pc. Dev. kit: Same as P/N 2209908 but has (10) RFduino DIP & 2 of everything else. See Web for details.
RFduino DIP, 16MHz, 3V, 128 kB Flash, 18mA, Bluetoooth 4.0 LE. Requires P/N 2209781 to program.
USB shield to program RFduino, USB type-A male, 500mA max.
CR2032 coin battery shield. 2V-3V output @ 25mA. 1.85" x 0.9"
Single AAA battery shield with step-up regulator to provide stable 3.3V @ 40mA
Dual AAA battery shield with step-up regulator to provide stable 3.3V @ 100mA
MicroSD shield allows R/W of your µSD cards. 3V-3.3V @ 100mA max. 0.9" x 0.9"
Proto shield with 37 free pads and breakout to I/O pins. 0.9" x 0.9". Add your own small circuits.
Dual relay shield. 12VDC @ 1A max rating per relay. 1.4" x 0.9". Control higher voltage and current loads.
RGB/Button shield. Two momentary pushbuttons and RGB LED. Works with iOS apps.
Servo shield drives up to 4 servos @ 6 VDC each. Needs separate 5-6VDC supply.
156
Order by Phone at 1-800-831-4242 or Online at www.Jameco.com
Price
$39.95
109.95
189.95
279.95
499.95
22.95
22.95
14.95
18.95
18.95
14.95
8.95
24.95
11.95
14.95
2209908/2209916/2209924
2209772
2209861
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising