Cable A ssemblies
Cable Assemblies
Introduction
Coax Cable Assemblies
Video Cords
RGB Patch Cables
Triax Cables
Twisted Pair and Fiber Optic Cable Assemblies
CatSnake™
Fiber Optic Assemblies for HDTV Cameras (SMPTE 311)
8
Please refer to “Terms of Use of Master Catalog” on page 23.22.
Page No
8.2
8.3 – 8.5
8.3
8.4
8.5
8.6
8.6
8.6
8 • Cable Assembly
Cable Assemblies
Table of Contents
C A B L E
A S S E M B L I E S
8.2
Introduction
Brilliant in Every Way
Everyone in HDTV wants unmatched high life cycle performance, quality, longevity
and peace of mind. Brilliance Assemblies are designed and optimized for HDTV.
This requires the cabling to conform to the very highest of standards so it can
deliver the very best in performance throughout its long lifetime. Quite simply, nothing beats a Belden cable – a proven fact, perfectly demonstrated by a product
range that delivers top performance in every way and enhances the assurances
offered by Brilliance Assemblies.
From precise installation with materials perfectly suited to their requirements to rigorous and proven testing methods supported by the Belden Installable Performance™
processes, users find that Brilliance Assemblies offer a peace of mind that is
unmatched.
• Exceptional Flexibility and Superior Cable Life: Under the stress of repeated
pulling, flexing, bending and crushing, cables can quickly display discrepancies
that lead to degraded signal transmission – or even breakage. To combat these
usage problems, Belden offers robust performance and enhanced flexibility in all
Brilliance Assemblies. An abrasion-resistant jacket adds further protection and
flexibility.
• Crush Resistance: Improves bending/flexing without pushing out the centre pin
and/or damaging attached equipment – ideal for the more rugged installations.
High resistance to crushing is provided by the foamed high-density polyethylene.
Belden products have as much as twice the crush resistance of similar commercially available products. This means that the cables are less susceptible to
diameter variations during their installation and use – resulting in minimal
degradation of impedance and RL.
Key Applications
The Connectors
•
•
•
•
•
•
•
High-resolution monitors
Project imaging
OB Vans
Satellite head ends
Video networks
CCTV
Ethernet professional audio
Brilliance Assemblies are put together using true 75 Ohm connectors that constantly perform to the very highest levels. Nominal 75 Ohm connectors can cause high
BER (Bit Error Rate) and significantly reduce transmission distance.
Belden perfectly complements innovative products such as ADC's ProAx™ triax
connectors and Neutrik's OpticalCon® next generation of HDTV camera connectors.
The Belden line includes three one-piece connectors, a stripping tool and a compression tool that facilitates swift cable connection.
Special Features
• 1505F: This cable is the focus product for video cords, a super high flex coax
developed by Belden for digital patch panel cabling requirements. The 1505F
has a soft matte PVC jacket which envelopes two tinned copper braids with a
unique compacted stranded central conductor. This combines the flexibility
borne from its stranded design to stability and RL performance that come right
from its solid core. The 1505F is fully sweep tested to 4.5 GHz.
• Low Return Loss (RL): Use your head room! Belden delivers Return Loss (RL)
performance that offers ample head room below the SMPTE 292M -15dB requirement. Belden products offer a best in class RL performance.
Bandwidth
Broadcasting needs are evolving at a rapid rate. Brilliance Assemblies offer the
most significant scope for ensuring growth whatever the bandwidth. Belden
products offer a best in class RL performance tested to 4.5 GHz throughout the
entire installation and monitoring processes and even after packaging.
High quality BNC, RCA and F connectors, recommended for RGB patch cables,
feature a brass and nickel construction with nickel-plated centre pins. In addition,
they offer twin compression points that seal and hold the connector to the coaxial
cable. By having two compression points, and a patent-pending viewing window
on the connector, installation is made much simpler.
To meet the requirements of the market, Belden is able to deliver Brilliance
Assemblies with other popular connector brands.
Availability
Many of these are available off the shelf from distributors. If you have a new or
unusual application or you cannot find your assembly in this catalog section that
meets your technical requirements contact technical support at +31-77-3875-414
or techsupport.venlo@belden.com.
SMPTE Recommended
Return Loss Limit
Belden Return Loss Specification Limit
Typical Return Loss
ProAx™ is an ADC Krone trademark.
OpticalCon® is a Neutrik trademark.
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t + 3 1- 7 7- 3 8 7 5 - 4 1 4 • w w w. b e l d e n - e m e a . c o m
C A B L E
A S S E M B L I E S
8.3
Coax Cable Assemblies
Video Cords
Part No.
Gender
Standard
Lengths
Standard
Unit Weight
ft.
lbs.
m
kg
Cond. AWG
(Stranding)
Diameter
Nom. DCR
Nominal
Insulation OD
inch
mm
Nominal OD
Shielding
Material
Nom. DCR
inch
mm
Nominal
Nom. Nom. Capacitance
Imp. Vel. of
(Ω) Prop. pF/ft. pF/m
Nominal Attenuation
MHz
dB/
dB/
100 ft. 100 m
Brilliance Assemblies • 1505F HDTV / SDI • BNC, RCA or F Connectors on both ends • Superflex 75 Ohm broadcast quality
assembled colored cable with two strain relief boosts
Digital video and HDTV run at higher frequencies and make better use of composite video for even greater picture clarity. To accommodate the need for higher frequency, and the ability to run more demanding applications such as high resolution VGA on large screens, HDTV, Hi-Res CAD, animation, editing and special effects, Belden
uses the extremely popular 1505F which has the optimum design to meet these new high-end requirements. The Belden line includes high performance professional
connectors with excellent connector pull strength and minimal signal loss. Perfect for patching, rack wiring, OB vans, satellite headends, CCTV, etc.
1.6
3.3
6.6
9.8
16.4
19.7
49.2
65.6
98.4
147.6
0.5
1.0
2.0
3.0
5.0
6.0
15.0
20.0
30.0
45.0
Return loss at
0.18
0.26
0.43
0.59
0.92
1.09
2.58
3.40
5.06
7.54
0.08
22 AWG
0.12
0.79 mm
0.19 (7x29) BC
0.27 47.8 Ω /km*
0.42 40.0 Ω /km**
0.49
1.17
1.54
2.29
3.42
0.145
3.68
Double
95% TC
Braid
7.8 Ω /km***
0.242
6.15
75
80%
17.0
55.7
1
3.6
10
71.5
135
270
360
540
720
750
1000
1500
2250
3000
0.2
0.5
0.9
2.5
3.5
5.1
6.0
7.4
8.7
8.9
10.5
13.3
16.9
20.3
0.7
1.6
2.9
8.2
11.5
16.7
19.7
24.3
28.5
29.2
34.4
43.6
55.4
66.6
5-3000 MHz: ≥ 15 dB
1505F BNC-BNC • for Analog & Digital Video, Patchcords, CCTV, Satellite Uplink / Downlink, Telecom
CA00100...
Example Part No. CA0010000C0D5
= 1505F BNC-BNC, 0.5 m, violet
Length
0.5
1.0
2.0
3.0
5.0
6.0
15.0
20.0
30.0
45.0
Violet
00C0D5
00C1
00C2
00C3
00C5
00C6
00C15
00C20
00C30
00C45
Black
01C0D5
01C1
01C2
01C3
01C5
01C6
01C15
01C20
01C30
01C45
Red
02C0D5
02C1
02C2
02C3
02C5
02C6
02C15
02C20
02C30
02C45
Green
03C0D5
03C1
03C2
03C3
03C5
03C6
03C15
03C20
03C30
03C45
Blue
04C0D5
04C1
04C2
04C3
04C5
04C6
04C15
04C20
04C30
04C45
Yellow
05C0D5
05C1
05C2
05C3
05C5
05C6
05C15
05C20
05C30
05C45
White
06C0D5
06C1
06C2
06C3
06C5
06C6
06C15
06C20
06C30
06C45
Orange
07C0D5
07C1
07C2
07C3
07C5
07C6
07C15
07C20
07C30
07C45
Yellow
05C0D5
05C1
05C2
05C3
05C5
05C6
05C15
05C20
05C30
05C45
White
06C0D5
06C1
06C2
06C3
06C5
06C6
06C15
06C20
06C30
06C45
Orange
07C0D5
07C1
07C2
07C3
07C5
07C6
07C15
07C20
07C30
07C45
Yellow
05C0D5
05C1
05C2
05C3
05C5
05C6
05C15
05C20
05C30
05C45
White
06C0D5
06C1
06C2
06C3
06C5
06C6
06C15
06C20
06C30
06C45
Orange
07C0D5
07C1
07C2
07C3
07C5
07C6
07C15
07C20
07C30
07C45
1505F RCA-RCA • for Audio or Video, Projectors, Digital Audio (S / PDIF) Subwoofer, Analog Audio and Composite Video
CA00101...
Example Part No. CA0010100C0D5
= 1505F RCA-RCA, 0.5 m, violet
Length
0.5
1.0
2.0
3.0
5.0
6.0
15.0
20.0
30.0
45.0
Violet
00C0D5
00C1
00C2
00C3
00C5
00C6
00C15
00C20
00C30
00C45
Black
01C0D5
01C1
01C2
01C3
01C5
01C6
01C15
01C20
01C30
01C45
Red
02C0D5
02C1
02C2
02C3
02C5
02C6
02C15
02C20
02C30
02C45
Green
03C0D5
03C1
03C2
03C3
03C5
03C6
03C15
03C20
03C30
03C45
Blue
04C0D5
04C1
04C2
04C3
04C5
04C6
04C15
04C20
04C30
04C45
1505F F-F • for Cable TV, Satellite and Antenna. The Brilliance Assemblies RF Video Cords can be Specially Ordered.
CA00102...
Example Part No. CA0010200C0D5
= 1505F F-F, 0.5 m, violet
Length
0.5
1.0
2.0
3.0
5.0
6.0
15.0
20.0
30.0
45.0
Violet
00C0D5
00C1
00C2
00C3
00C5
00C6
00C15
00C20
00C30
00C45
Black
01C0D5
01C1
01C2
01C3
01C5
01C6
01C15
01C20
01C30
01C45
Red
02C0D5
02C1
02C2
02C3
02C5
02C6
02C15
02C20
02C30
02C45
Green
03C0D5
03C1
03C2
03C3
03C5
03C6
03C15
03C20
03C30
03C45
Blue
04C0D5
04C1
04C2
04C3
04C5
04C6
04C15
04C20
04C30
04C45
* DC loop resistance • ** DC resistance inner conductor • *** DC resistance outer conductor • DCR = DC resistance • M = Male • F = Female • TC = Tinned Copper • BC = Bare Copper
To comfortably support today’s broadcast technology, Brilliance Assemblies can be specially ordered:
1. for mobile television broadcast trucks with 179DT
2. as an economical version with 1855A
BNC-BNC (CA00103)
BNC-BNC (CA00106)
3. for long runs with 1505A
4. for longer runs with 1694A
All these Brilliance Assemblies are available in 10 colors (1505A with 8 colors).
If you require a specific connector, you can choose from the following brands: ADC, Neutrik, Damar+Hagen, Telegaertner.
Recommened Color Schema:
BNC-BNC (CA00109)
BNC-BNC (CA00112)
Red+Black
RGB (Red, Green, Blue)
Orange
Yellow
Violet
Analog audio
Component video
Digital audio
Composite video
Digital video/HDTV
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t + 3 1- 7 7- 3 8 7 5 - 4 1 4 • w w w. b e l d e n - e m e a . c o m
8 • Cable Assembly
Gas-injected Foam HDPE Insulation • PVC Jacket (Matte Black, Red, Green, Blue, Yellow, White, Violet, Orange)
C A B L E
A S S E M B L I E S
8.4
Coax Cable Assemblies
RGB Patch Cables
Part No.
Standard
Lengths
Standard
Unit Weight
ft.
lbs.
Gender
m
kg
Cond. AWG
(Stranding)
Diameter
Nom. DCR
Nominal
Insulation OD
inch
mm
Shielding
Material
Nom. DCR
Nominal OD
inch
mm
Nominal
Nom. Nom. Capacitance
Imp. Vel. of
(Ω) Prop. pF/ft. pF/m
Nominal Attenuation
MHz
dB/
dB/
100 ft. 100 m
Brilliance Assemblies • 1277R (3-Coax) and 1279R (5-Coax) HDTV / SDI • 3 or 5 BNC Connectors on both ends • Flexible
75 Ohm broadcast quality assembled RGB cable with strain relief boots
RGB cables are used for component video formatted applications that segment the video signal into Red, Green and Blue elements, identified through use of corresponding cable jacket colors (RGB cables). Synchronization (Sync) and Vertical Hold (Hold) signals can be embedded within one of the elemental video components or they
can be transmitted separately utilizing the 4th and 5th coaxes. When present, the 4th coax has a yellow jacket; the 5th coax has a black jacket.The outer jacket of the
Belden line is stripped back 150 mm from both ends. The unique design of these cables also makes them ideal for multiple runs of composite video signals such as SDI
or HDTV (video snake cable). The Belden lines are ideal for high-resolution monitor and projection imaging in corporate boardrooms, command and control centers,
multi-purpose auditoriums, home theaters, performance venues, etc.
Foam HDPE Insulation • Matte Black PVC Jacket
CA00150 01C1
CA00150 01C2
CA00150 01C3
CA00150 01C6
CA00150 01C15
CA00150 01C20
CA00150 01C30
CA00150 01C45
BNC-BNC
3.3
6.6
9.8
19.7
49.2
65.6
98.4
147.6
1.0
2.0
3.0
6.0
15.0
20.0
30.0
45.0
0.24
25 AWG
0.45 mm
(Solid) BC
0.092
2.33
Coax OD:
0.114
2.90
Duofoil®
95% TC
Braid
0.320
0.403
8.13
10.24
75
80%
17.0
55.7
5
50
100
400
750
900
1000
3000
1.2
3.7
4.9
9.5
13.4
15.0
15.8
31.2
3.8
12.1
16.1
31.2
44.0
49.2
51.8
102.4
25 AWG
0.45 mm
(Solid) BC
0.092
2.33
Coax OD:
0.114
2.90
Duofoil®
95% TC
Braid
0.320
0.403
8.13
10.24
75
80%
17.0
55.7
5
50
100
400
750
900
1000
3000
1.2
3.7
4.9
9.5
13.4
15.0
15.8
31.2
3.8
12.1
16.1
31.2
44.0
49.2
51.8
102.4
Foam HDPE Insulation • Matte Black PVC Jacket
CA00151 01C1
CA00151 01C2
CA00151 01C3
CA00151 01C6
CA00151 01C15
CA00151 01C20
CA00151 01C30
CA00151 01C45
BNC-BNC
3.3
6.6
9.8
19.7
49.2
65.6
98.4
147.6
1.0
2.0
3.0
6.0
15.0
20.0
30.0
45.0
* DC loop resistance • ** DC resistance inner conductor • *** DC resistance outer conductor • DCR = DC resistance • M = Male • F = Female • TC = Tinned Copper • BC = Bare Copper
To comfortably support today’s broadcast technology, Brilliance Assemblies can be specially ordered:
1. same but Banana Peel® design
2. as an economical version with 1855A
3. for long runs with 1505A
4. for longer runs with 1694A
3-Coax BNC-BNC
1281S3 (CA00152)
7787A (CA00154)
7794A (CA00156)
7710A (CA00158)
5-Coax BNC-BNC
1281S5 (CA00153)
7789A (CA00155)
7796A (CA00157)
7712A (CA00159)
If you require a specific connector you can choose from the following brands: ADC, Neutrik, Damar+Hagen, Telegaertner.
Additional Accessories for 1277R-1279R and 1281S3-S5 One-Piece Connector
1B25A • 75-Ohm BNC (male)
1R25A • 75-Ohm RCA
Stripping and Compression Tool
HCST • Cable Prep Tool
HCCT • works with BNC, RCA and F Connectors
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t + 3 1- 7 7- 3 8 7 5 - 4 1 4 • w w w. b e l d e n - e m e a . c o m
C A B L E
A S S E M B L I E S
8.5
Coax Cable Assemblies
Triax Cables
Part No.
Gender
Standard
Lengths
Standard
Unit Weight
ft.
lbs.
m
kg
Cond. AWG
(Stranding)
Diameter
Nom. DCR
Nominal
Insulation OD
inch
mm
Shielding
Material
Nom. DCR
Nominal OD
inch
mm
Nominal
Nom. Nom. Capacitance
Imp. Vel. of
(Ω) Prop. pF/ft. pF/m
Nominal Attenuation
MHz
dB/
dB/
100 ft. 100 m
Brilliance Assemblies • 7783AF Triax 8 HDTV / SDI • ProAx™ Triax Camera Connectors: Global Format on both ends •
Flexible 75 Ohm broadcast quality assembled Triax cable
The Belden triax lines are assembled with ADC's ProAx™ triaxial camera connectors. This combination will undoubtedly change your views of triaxial assemblies. ADC's
patented ProAx™ triaxial camera connector has a two-piece center conductor offering several options. Key benefits include the ability to swap gender parts from male
to female and vice versa in only a few seconds and the way mates can be swapped equally quickly with Kings, Lemo, Fischer and Damar+Hagen parts. The Belden lines
are ideal for field use, sporting/live events, mobile trucks, stadiums, fixed wiring, TV/Studio production.
CA00200 02C50
CA00200 02C100
CA00200 02C150
CA00200 02C200
CA00200 02C250
Male - Female
164
328
492
656
820
50
100
150
200
250
male
13.56
26.01
38.47
50.93
63.38
6.15
0.99 mm
0.178
11.80
20 AWG
17.45 (19x0.36) SPC
23.10 32.0 Ω /km*
28.75 22.0 Ω /km**
4.52
ProAx™ triax camera connectors: global format
Return loss at
1-100 MHz: ≥ 26 dB
100-300 MHz: ≥ 23 dB
90% SPC
0.331
Braid
+ 80% BC
Braid
10.0 Ω /km***
6.5 mm
8.40
75
83%
16.5
54.0
1
10
20
40
50
60
100
300
0.2
0.7
1.0
1.4
1.6
1.7
2.3
4.2
0.6
2.2
3.2
4.6
5.1
5.6
7.5
13.8
female
Screening attenuation at 30-1000 MHz: ≥ 75 dB
Brilliance® Broadcast Assembly line can be specially ordered with mates for
Kings, Lemo Redel F, Fischer SE & KE and Damar+Hagen.
Brilliance Assemblies • 7784AF Triax 11 HDTV / SDI • ProAx™ Triax Camera Connectors: Global Format on both ends • Flexible
75 Ohm broadcast quality assembled Triax cable
Foam Insulation • Red PVC Jacket
CA00201 02C50
CA00201 02C100
CA00201 02C150
CA00201 02C200
CA00201 02C500
Male - Female
164
328
492
656
1640
50 20.17
100 39.24
150 58.31
200 77.38
500 191.80
male
9.15
1.4 mm
0.256
17.80
16 AWG
26.45 (19x0.28) SPC
35.10 26.0 Ω /km*
87.00 18.0 Ω /km**
6.50
ProAx™ triax camera connectors: global format
Return loss at
1-100 MHz: ≥ 26 dB
100-300 MHz: ≥ 23 dB
90% SPC
Braid
+ 80% BC
Braid
8.0 Ω /km***
8.5 mm
0.433
11.00
75
82%
16.5
54.0
1
10
20
40
50
60
100
300
0.2
0.5
0.7
1.0
1.1
1.3
1.6
3.1
0.5
1.6
2.3
3.3
3.7
4.1
5.4
10.3
female
Screening attenuation at 30-1000 MHz: ≥ 75 dB
Brilliance® Broadcast Assembly line can be specially ordered with mates for
Kings, Lemo Redel F, Fischer SE & KE and Damar+Hagen.
Brilliance Assemblies • 7785A Triax 14 HDTV / SDI • ProAx™ Triax Camera Connectors: Global Format on both ends • Flexible
75 Ohm broadcast quality assembled Triax cable
Foam Insulation • Red PVC Jacket
CA00202 02C50
Male - Female 164
CA00202 02C100
328
CA00202 02C150
492
CA00202 02C200
656
CA00202 02C500
1640
CA00202 02C1000
3280
50 30.31 13.75
2.21 mm
100 59.52 27.00
12 AWG
150 88.74 40.25 (7x0.75) SPC
200 117.95 53.50 14.0 Ω /km*
500 293.21 133.00 10.0 Ω /km**
1000 585.32 265.50
male
Return loss at
0.382
9.70
ProAx™ triax camera connectors: global format
5-850 MHz: ≥ 21 dB
90% SPC
Braid
+ 80% BC
Braid
4.0 Ω /km***
12.7 mm
0.551
14.00
75
82%
16.5
54.0
1
10
20
40
50
60
100
300
0.1
0.3
0.5
0.7
0.8
0.9
1.2
2.3
female
Screening attenuation at 30-1000 MHz: ≥ 75 dB
Brilliance® Broadcast Assembly line can be specially ordered with mates for
Kings, Lemo Redel F, Fischer SE & KE and Damar+Hagen
* DC loop resistance • ** DC resistance inner conductor • *** DC resistance outer conductor • DCR = DC resistance • M = Male • F = Female • BC = Bare Copper • SPC = Silver-Plated Copper
ProAx™ is an ADC Krone trademark.
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t + 3 1- 7 7- 3 8 7 5 - 4 1 4 • w w w. b e l d e n - e m e a . c o m
0.4
1.1
1.6
2.3
2.6
2.8
3.8
7.7
8 • Cable Assembly
Foam Insulation • Red PVC Jacket
C A B L E
A S S E M B L I E S
8.6
Twisted Pair and Fiber Optic Cable Assemblies
CatSnake™
Part
No.
Connector
Standard
Lengths
ft.
m
Standard
Unit Weight
lbs.
kg
Nominal
Insulation OD
Conductor
(Stranding)
Diameter
Nom. DCR
inch
mm
Shielding
Material
Nom. DCR
Nominal OD
inch
mm
Freq.
MHz
Max.
Atten.
dB/100m
Min. PSUM
NEXT
dB
ACR
ACR ELFEXT
dB/100m
Min.
RL
dB
dB/100m dB/100m
Brilliance Assemblies • 1305A • Mobile Cat 5e • Neutrik EtherCon® Connectors • CatSnake™ is a new design from Belden and
assemblied with standard RJ45 connectors
The round PVC jacket provides durability and the cable ends are assembled with Neutrik's EtherCon®. This design was developed to provide a comprehensive solution
for data transfer in harsh and demanding applications. CatSnake™ assembly is particularly suitable for Ethernet networking in commercial audio, concert sound reinforcement, stage production, DMX lighting and industrial internet access environments.
4 Bonded-pairs UTP • Black PVC Jacket
CA00250 01C50
CA00250 01C100
CA00250 01C500
EtherCon®
164
328
1640
50
100
500
11.02
19.84
90.39
5.0
9.0
41.0
0.51 mm
24 AWG
(7x32) TC
0.037
0.95
Bonded-Pair
Unshielded
0.295
7.49
1
4
10
16
20
31.25
62.5
100
155
200
310
350
2.0
4.0
6.4
8.1
9.2
11.2
16.8
21.7
27.7
32.0
41.3
44.3
65.3
56.3
50.3
47.3
45.8
42.9
38.4
35.3
32.5
30.8
27.9
27.2
63.3
52.3
43.9
39.1
35.2
31.3
21.6
17.1
4.7
3.0
>0
>0
60.8
48.7
40.8
36.7
34.7
30.9
24.8
20.8
16.9
14.7
10.9
9.9
63.3
52.3
43.9
39.1
35.2
31.3
21.6
17.1
4.7
3.0
>0
>0
20.0
23.0
25.0
25.0
25.0
23.6
21.9
20.1
19.0
19.0
18.0
17.0
Brilliance® Broadcast Assembly line can be specially ordered as CA00251 with only RJ-45.
Fiber Optic Assembly For HDTV Cameras (SMPTE 311)
Part
No.
Connector
Standard
Lengths
Standard
Unit Weight
ft.
lbs.
m
kg
Conductor (Stranding)
Diameter Nom. DCR
Nominal OD
inch
mm
Component
Description
Shielding
Material
& Nom.
DCR
Component OD
inch
mm
Nominal
Attenuation
dB/
dB/
100 ft. 100 m
Brilliance Assemblies • 7804C • SMPTE 311M HDTV cable • Single-Mode Fiber with copper conductors • Lemo 3K.93C connectors
With the rise of high-definition video applications, such as 1080i and 720p, the bandwidth demands on camera cables has grown significantly. To meet these new requirements, Belden now offers (new generation) 7804C, which consists of dual single-mode fiber optic cables and copper components for power and data, and a special connector made by Lemo.
Composite Cable: 2 Power Conductors • SM Fiber (24 AWG and 16 AWG) • Stranded TC Conductors • Black Belflex® Jacket
CA00270 01C100 2x3K.93C.TLMC 328
CA00270 01C500
1640
CA00270 01C1.000
3280
100 64.82 29.40
500 318.79 144.60
1000 636.25 288.60
–
0.362
9.2
2xFiber
(2) Breakout
38 AWG
Fibers
TC Braid
SM/125µ/900µ 95% Shield
core/clad/buffer Coverage
2.8 Ω /m*
9.2 Ω /km
0.079
2.00
0.14
0.45
0.362
9.2
(2) Conductors
24 AWG
(7x32) TC
0.024˝
23.3 Ω /m*
76.4 Ω /km
38 AWG
TC Braid
95% Shield
Coverage
2.8 Ω /m*
9.2 Ω /km
0.050
1.27
0.14
0.45
0.362
9.2
(2) Conductors
16 AWG
(65x34) TC
0.037 ˝
4.3 Ω /m*
14.1 Ω /km
38 AWG
TC Braid
95% Shield
Coverage
2.8 Ω /m*
9.2 Ω /km
0.093
2.36
0.14
0.45
Brilliance® Broadcast Assembly line can be specially ordered as CA00271 with: Neutrik's OpticalCon® • Suitable for indoor studio and camera applications acc.
IEC 60664-1 (Pollution degree 1, over voltage category 1), not compatible to SMPTE standard.
* DC loop resistance • DCR = DC resistance • TC = Tinned Copper
EtherCon® and OpticalCon® are Neutrik trademarks.
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t + 3 1- 7 7- 3 8 7 5 - 4 1 4 • w w w. b e l d e n - e m e a . c o m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising