SDS-824X TrustedTM Industrial Control System TrustedTM Power
SDS-824X
TrustedTM Industrial Control System
TrustedTM Power system-T824X
FEATURES
Redundant and N+1
configurations
Hot replaceable power
Packs
Current sharing
Current limiting
Power factor correction
DESCRIPTION
Power System is a high density flexible power supply
The Trusted
designed to convert main line voltages of either 110V/240Vac. Outputs are
TM
either 24Vdc for Trusted product or 24-28Vdc adjustable field power.
Diagnostics contacts
The power supply system consists of a 1U Power Shelf, containing up to
three 750W Power Packs. The Power Packs load share in configurations
using 1 or more Power Shelf. Each Power Pack has an individual supply
connection via a mechanically retained IEC320 type connector. Each Power
Shelf can supply 2250Watts of power or 1500Watts with n+1 redundancy
from a single source. Multiple units can be connected for further capacity or
redundancy requirements.
Input/output fail
diagnostics per power pack
TM
Configurable output voltage
Diagnostics information of Power Pack status is provided via the Power Port,
which connects to the rear of the Power Shelf. This device monitors input
and output conditions and reports out of range faults and over
temperature/fan failure using relay contacts. The Power Port also allows
connection of the optional rack mounted Power Controller for live
configuration of output voltage and current, monitoring up to 12 Power
Packs in 4 Power Shelves.
Product No.
Product name
Description
T8240
Power Shelf
19” x 1U chassis for up to 3 Power Packs.
Includes Power Port, 10 way cable
connector and mains plugs.
T8231
Power Pack 24Vdc
750Watt, universal input, 24Vdc out.
T8232
Power Pack 28Vdc
750Watt, universal input, 28Vdc out.
T8243
Power Port
Plug in diagnostic interface and 10 way
cable conector.
T8234
Power Controller
For live adjustment of output voltage.
19”x1U
T8235
Power Shield
Covers unused Power Pack positions
TC323
Power Shelf Interconnect
Ribbon cable for power sharing between
2-4 Power Shelves and connection to
Power Controller
T8247
Power Shelf support
brackets
A pair of brackets that can support up to 4
Power Shelves
Issue 2 Jan 2006
SDS-824X
TrustedTM Industrial Control System
TrustedTM Power system-T824X
MECHANICAL
SPECIFICATION
Dimensions (HxWxD):
43.5mm x 483mm x
340mm
(1.71ins x 19ins x
13.36ins)
Note: Optional support
bracket requires minimum
4U rack height. Unused
space may be populated
by other equipment.
Weight (fully populated)
10kg (approx.)
22lbs (approx.)
ASSEMBLY LAYOUT
ELECTRICAL SPECIFICATION
ENVIRONMENTAL
Voltage Range – Input
90V ac to 264V ac
Voltage Range – Output
Frequency Range
Inrush Current
Power Factor
Efficiency
Hold-up Time
Output Power
Isolation voltage
24Vdc or 28V dc (23-28 adjustable)
47Hz to 63Hz
50A max
0.95 min, 0.99 typical
78 – 84%
20ms min
750W per Power Pack
3kVac, Primary to secondary
1.5kVac Primary or secondary to ground
Operating Temperature:
0°C to 60°C
(30°F to 140°F)
Operating Humidity:
5 to 95%, noncondensing
Vibration:
10 to 57Hz
57 to 150Hz
±0.075mm
1g
Shock:
15g, ½ sine wave, 11ms
EMI (IEC 801):
ESD
Air discharge to 15kV
Contact discharge to 8kV
Radiated Fields
10V/m, 27MHz to
500MHz
Transients and Bursts
2kV, 2.5kHz for
t=60 seconds
ICS Triplex
Technical data sheets are intended for
information and guidance. The Company
has a policy of continual product
development and improvement.
Specifications are subject to change
without notice. For latest information, visit
our Website:- www.icstriplex.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising