ES37-CCP2S - Andrew Corporation

ES37-CCP2S - Andrew Corporation
PUBLICATION
3.7-Meter C-Band Earth Station Antenna
F-1 INTELSAT Type Approved
General Description and Specifications
Features
Description
• Fully Type Approved for F-1, D-1, G, and Z INTELSAT
Eight different 3.7-meter split and solid reflector an-tenna
models are available. The Type ES37MPJK Series antennas have a motorizable mount with machine jack-screws,
the Type ES37MPK Series antennas have a motorizable
mount with pipe struts, the Type ES37K Series antennas
have a manual pedestal mount and the Type ES37 Series
antennas are mountable to a 6 inch nominal customersupplied pipe.
•
•
•
•
•
•
•
•
•
operating standards
Eliminates costly field testing of transmit patterns
and G/T measurements
Gregorian optics for high gain and pattern control
Motorizable mount allows upgrade to motorization
Optional steptrack controls
Large enclosure with security doors
Wide-band two-port feed system 3.625-4.2 GHz Rx
and 5.850-6.425 GHz Tx
125 mph survival in any position of operation
Polarization Field Switchable Circular/Linear
Circular Polarization Field Switchable RHCP to
LHCP
Introduction
Andrew Corporation announces final INTELSAT F-1 Type
Approval of it’s 3.7-meter C-band earth station products.
This first ever F-1 Type Approval, for this size antenna, by
INTELSAT followed extensive factory testing witnessed by
COMSAT, INTELSAT’s U.S. Signatory.
By specifying an Andrew INTELSAT Type Approved F-1
3.7-meter product, savings as high as $10,000 per antenna in field testing are realized and the system turn-on is
expedited without the need of on-site engineers to conduct
testing. This may require coordination with each of the
INTELSAT signatories depending on the region.
Andrew also offers a complete line of C-band - B, F-1, F-2,
F-3; Ku-band - E-2, E-3; and C-/Ku-band - G and Z standard INTELSAT antennas and can provide on-site or infactory testing of these products whether they be fixed or
transportable.
Contact your Andrew sales representative for further
details on how to implement these new F-1 Type Approved antennas into your next project.
Attached are typical patterns measured during the witnessing of the Type Approval Phase II Testing.
The entire test report is filed with either INTELSAT,
COMSAT, EUTELSAT or ASIASAT. Other signatories can
request copies thru ESA Product Line.
Type ES37K-CCP2 includes a large hub enclosure (24”
deep), manual pedestal mount, azimuth and elevation
strut kit, subreflector subassembly, subreflector strut kit,
azimuth and elevation hand crank kit, 2-port combiner network, wide-band feed horn assembly, circular waveguide
assembly, 3.7-meter two-piece reflector assembly and various hardware kits for assembly. This antenna model can
be deployed in the field with minimal testing of G/T as a
fully-certified INTELSAT Standard F-1 under INTELSAT
registration number IA014A00.
Type ES37K-CCP2-24 includes all of the above mentioned
components and an LNA kit that is guaranteed to meet the
minimum F-1 standard requirement G/T of 22.7 dB/K at 4.0
GHz and at a 10 elevation. This antenna system can be
deployed in the field as a fully-certified INTELSAT Standard
F-1 under INTELSAT registration number IA014AA0.
Type ES37MPJK-CCP2 is the same as Type ES37KCCP2 but is mounted on a motorizable mount. The
INTELSAT registration number is IA014A00.
Type ES37MPJK-CCP2-24 is the same as Type ES37KCCP2- 24 but is mounted on a motorizable mount. The
INTELSAT registration number is IA014AA0.
Type ES37-CCP2S includes a subreflector subassembly,
subreflector strut kit, 2-port combiner network, wide-band
feed horn assembly, circular waveguide assembly, 3.7meter split reflector assembly and various hardware kits
for assembly. This antenna can be deployed in the field
with minimal testing of G/T as a fully certified under
INTELSAT Standard F-1 under INTELSAT registration
number IA014A00.
Type ES37-CCP2S-24 includes all of the above mentioned components of ES37-CCP2 plus an LNA Kit that is
guaranteed to meet the minimum F-1 standard requirement G/T of 22.7db/K at 4.0 GHz at a 10 degree elevation. This antenna can be deployed in the field as a fully
certified INTELSAT Standard F-1 under INTELSAT registration number IA014AA0.
Note: All applicable Type Approval Certificates are available thru the Andrew Fax-On-Demand System.
1-800-861-1700 (North America)
1-708-873-3614 (All Other Regions)
Andrew Corporation
10500 W. 153rd Street, Orland Park, IL U.S.A. 60462
SP37-02-A 5 August 1999 Page 1 of 4
PUBLICATION
Electrical Specifications
Antenna Type
ES37-CCP2S
ES37-CCP2S-24
ES37K-CCP2
ES37K-CCP2-24
ES37MPK-CCP2
ES37MPK-CCP2-24
ES37MPJK-CCP2
ES37MPJK-CCP2-24
INTELSAT Registration Number
IA014A00
IA014A00
IA014A00
IA014AA0
Receive Frequency, GHz
Transmit Frequency, GHz
3.625-4.2
5.850-6.425
3.625-4.2
5.850-6.425
3.625-4.2
5.850-6.425
3.625-4.2
5.850-6.425
40.9
42.4
42.9
45.7
46.2
46.4
40.9
42.4
42.9
45.7
46.2
46.4
40.9
42.4
42.9
45.7
46.2
46.4
40.9
42.4
42.9
45.7
46.2
46.4
Gain in dB
@
@
@
@
@
@
3.625
4.000
4.200
5.850
6.175
6.425
GHz
GHz
GHz
GHz
GHz
GHz
Polarization
Circular, Switchable to Linear in the Field
Polarization Discrimination, Voltage Axial
Ratio Rx 1.20; Tx 1.09
Receive 3 dB Beamwidth
Transmit 3 dB Beamwidth
1.20°
.80°
1.20°
.80°
1.20°
.80°
1.20°
.80°
Antenna Noise Temperature
Elevation
10°
20°
30°
Kelvin
42
37
35
Kelvin
42
37
35
Kelvin
42
37
35
Kelvin
42
37
35
G/T with 38K LNA @ 10° El Angle
@ 4.0 GHz
23.3 dB/K
23.3 dB/K
23.3 dB/K
23.3 dB/K
Types ES37K-CCP2-24, ES37MPJK-CCP2-24 and ES37-CCP2S-24 include an INTELSAT approved LNA kit.
If preferred, however, this LNA can be separately purchased directly from the following Andrew specified vendor for use with other Andrew Type Approved
earth station antennas such as 3.7m antenna Types ES37K-CCP2 and ES37MPJK-CCP2.
Below is a listing of the Type Approved LNA and respective vendor.
For Use With
Antenna Type
Andrew
LNA Kit P/N
Andrew
LNA P/N
Kelvin
Vendor
ES37K-CCP2
ES37-CCP2S
ES37DK-CCP2
ES37MPJK-CCP2
AE01K-D0402-003
ELNAC-16039
38K
Locus, Inc.
P.O. Box 740
State College, PA
Vendor
LNA P/N
RF3000-39-60B3
Other LNA’s, that meet or exceed the Type Approved noise temperature specifications, may be utilized, but will require full specification submittal to
COMSAT for evaluation and final approval.
Andrew Corporation
10500 W. 153rd Street, Orland Park, IL U.S.A. 60462
SP37-02-A 5 August 1999 Page 2 of 4
PUBLICATION
Andrew Corporation
10500 W. 153rd Street, Orland Park, IL U.S.A. 60462
SP37-02-A 5 August 1999 Page 3 of 4
PUBLICATION
Andrew Corporation
10500 W. 153rd Street, Orland Park, IL U.S.A. 60462
SP37-02-A 5 August 1999 Page 4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising