(PoE+) Midspan Injector for 10/100/1000T(X

(PoE+) Midspan Injector for 10/100/1000T(X
Power over Ethernet (PoE+)
Midspan Injector for 10/100/1000T(X)
CNGE1IPS
INCLUDED
1000 MBPS
802.3at
The ComNet™ CNGE1IPS is an industrial power over Ethernet (PoE+) midspan
injection module that injects 56 VDC at 0.625 amperes to any network cable.
Operating power and 10/100/1000T(X) Ethernet data are easily combined on
one cable, eliminating the need to install additional power outlets and electrical
cabling. The CNGE1IPS is fully compliant with the requirements of IEEE 802.3at for
Power Sourcing Equipment (PSE), and features auto detection of powered devices
(PDs). Transmission distances of up to 330 feet (100 meters) are supported, and this
injector supplies operating power for all PDs drawing a maximum of 30 watts. The
unit provides AC line and powered device over-voltage and short circuit protection.
Ideally suited to fiber optic, wireless, or other networks where it may be difficult to
furnish operating power to the PDs, the CNGE1IPS is a true plug-and-play product
requiring no user configuration or other set-up.
FEATURES
APPLICATIONS
› Easily combines operating power and 10/100/1000T(X)
Ethernet data to one network cable
›R
emote operating power for IP CCTV cameras for security
and surveillance systems
› Fully Compliant with IEEE Standard 802.3at for Power
Sourcing Equipment
›R
emote operating power for Voice over IP (VoIP) telephony
networks
› Housed in a compact, rugged, light-weight package
›R
emote operating power for wireless LAN access points
› Internal 90 to 264 VAC power supply provides short circuit
protection for powered devices
› Industrial Security, Transportation/ITS, and Industrial Control/
Factory Automation IP Networks
› Designed for deployment in industrial -25º to +75º C
operating environments.
› Rugged, compact package for installation where space may
be limited
› Ease of installation & true plug-and-play operation: no user
configuration or settings required
› UL, CSA, FCC, CE, EN60950-1, and RoHS Approved
› Unit can be wall mounted or DIN rail mounted using the
included adaptor kit
› 5 Year Warranty
5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Power over Ethernet (PoE+)
Midspan Injector for 10/100/1000T(X)
CNGE1IPS
SPECIFICATIONS
Standard
IEEE802.3 10BASE-T
Electrical & Mechanical
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3at PoE+
Environmental
Connector
RJ45 Data In/Out:
Data/signal pairs pin (1,2) (3,6) (4,5) (7,8)
RJ45 Power outPower over pairs: 4,5(V+), 7,8(V-)
Power
Power Consumption
MTBF
Operating Temp
Storage Temp
Relative Humidity
>50,000 hours
-25˚ C to +75˚ C
-40˚ C to +80˚ C
5% to 90% (non-condensing)
Approvals & EMC Compliance
35W Max
Input Power SupplyAC 90~264V, 47~63 Hz,
0.75A @ 120VAC (0.39A @ 230VAC)
Power Output
56 VDC @ 0.625 A
Indicating LEDs
System
Size4.9 × 3.0 × 1.5 in (12.5 × 7.5 × 3.8 cm)
Shipping Weight
<2 lbs./0.9 kg
EMI
Safety FCC Class B, EN55022 Class B
UL 1950, CSA 22.2, TUV EN60950-1
PoE+ Output (green)
ORDERING INFORMATION
Part Number
Description
CNGE1IPS
Industrial Gigabit Power over Ethernet midspan injector, compatible with IEEE802.3at
Included Accessories
Country-specific line cord
DIN_Rail Mounting Adaptor Kit
TYPICAL APPLICATION
E+
PoE+ Powered Device
IEEE802.3at
CNGE1IPS
Power
Injector
LEGEND
E
ETHERNET
AC 90 – 264V IN
ETHERNET + PoE+
3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
© 2014 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are registered trademarks of Communication Networks.
08 Jul 2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising