Prod.dok Thorsman plugs.indd

Prod.dok Thorsman plugs.indd
Cabling & Fixing
Plugs
Thorsman Range
Thorsman TPTM Wall plugs …………………………………………… Page 2
Thorsman Grepi TPH High performance plugs …………………… Page 5
Thorsman TPS Nail plugs …………………………………………… Page 7
Thorsman TCP Clip plugs …………………………………………… Page 9
Thorsman QUICKITM TPN Universal plugs ………………………… Page 10
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
1 (10)
P101486
P124759
Cabling & Fixing
Plugs
Thorsman TPTM
Wall plugs
Description
TP is a wall plug of polythene for light-weight installations in most building
materials. The plug is especially suitable for installations where shear loads
are dominating. For mounting where pull-out loads dominate, or by high
temperatures, metal fixings are recommended.
TP has a smooth surface to get high friction against the wall of the hole.
Four slits spread the radial expansion in all dimensions.
The wall plug has a collar and wings to prevent the plug from rotating and
disappearing into the hole.
TP has a unique Colour CodeTM to identify each plug
size. This Colour Code has been registered as a trade
mark in all EU countries and in Norway. The Colour
Code is printed on the cartons.
Material data
Material
Colours
HDPE (polyethylene HD).
White, yellow, red, brown, blue, green. grey, orange.
Operative data
Temperature range
–50°C to +80°C
Mounting instruction
Drill the hole in accordance
with the table and install the
plug. In plasterboard – make
a hole using a drill or an awl.
The hole should be a press
fit for the plug. Use TP1
yellow for a single sheet and
TP2 red for double sheets.
M10500
M10490
M10160
P101034
Instructions for drill and screw dimensions can be found on the package.
Fix with a screw long enough
to penetrate through the
whole length of the plug and
fixture.
The installation is ready and
the screw has expanded the
plug in a correct way.
Technical data
Practical loading cap. with biggest screw
Shear load/Pull-out load1)
Drill diameter
mm
mm
mm
Wood screw Concrete Solid brick Low-density2)
C25
concrete 500 and
expanded clay
3)
3)
Ø mm
kN
kN
kN3)
TP0
5.5
—
20
3.5–5
0.4/0.15 0.3/0.15
—
TP1
5.5
5
25
3.5–5
0.5/0.25 0.4/0,2
0.1/0.04
TP2
5.5
5
40
3.5–5
0.6/0.4
0.5/0.3
0.15/0.04
TP2B
8
7
45
5–6
1.2/0.8
0.7/0.4
0.25/0.1
TP3
10
9
50
5–7
1.4/1.0
—
0.3/0.15
TP4
12
10
65
8–10
3.0/2.0
—
0.5/0.25
TP 14
14
—
78
10-12
4.0/2.5
—
—
TP 16
16
—
88
12
5.0/3.0
—
—
6
35
3.5–5
0.6/0.4
0.5/0.3
0.2/0.08
TP type
Concrete Low-density2) Min. drill
concrete
depth
TP 6x30 6
Safety factor 4.5 for shear and 6 for pull-out load.
Low-density concrete might also be called lightweight or aerated concrete.
3)
1 kN ≈ 100 kg.
1)
2)
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
2 (10)
Plugs
Cabling & Fixing
Thorsman TPTM
Wall plugs
Range
Type
Colour
Dimensions
Ø/L (mm)
Qty per
package
EAN code
Internal
ID-No.
Ref. No.
Double-expanding, easy-to-install wall plug, colour coded for easy size identification. To be used in applications where shear
loads dominate. Suitable for concrete, stone, low-density concrete, expanded clay, hollow bricks and blocks, solid bricks and
plasterboard.
Material: Polyethylene (HD).
P125690
TP0
White
5.5/16.5
100
7315881000005
10000001
1000 009
P125691
TP1
Yellow
5.5/22
100
7315881001002
10000008
1001 007
P125692
TP2
Red
5.5/35
100
7315881003006
10000024
1003 003
P125693
TP2B
Brown
8/40
100
7315881005000
10000042
1005 008
P125694
TP3
Blue
10/45
100
7315881006007
10000057
1006 006
P125695
TP4
Green
12/60
100
7315881007004
10000065
1007 004
P130553
TP14
Grey
14/70
10
3606480335037
20064013
IMT38063
P126201
TP16
Orange
16/80
10
3606480335044
20064014
IMT38064
P125020
TP0
White
5.5/16.5
500
7315881000012
10000002
1000 017
P125019
TP1
Yellow
5.5/22
500
100
7315881001026
7315880100003
10000009
10000010
1001 023
1001 025
P125018
TP2
Red
5.5/35
250
7315881003013
10000025
1003 011
P89050
TP 6x30
Red
6/30
100
250
7315881003020
7315880100010
10000026
10000027
1003 020
1003 029
P125017
Plugs on sprue of ten
TP2B
Brown
8/40
100
7315881005017
10000043
1005 016
Single plugs
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
3 (10)
Plugs
Cabling & Fixing
Thorsman TPTM
Wall plugs
Range, bulk
Type
Colour
Dimensions
Ø/L (mm)
Qty per
package
EAN code
Internal
ID-No.
Ref. No.
Double-expanding, easy-to-install wall plug, colour coded for easy size identification. To be used in applications where shear
loads dominate. Suitable for concrete, stone, low-density concrete, expanded clay, hollow bricks and blocks, solid bricks and
plasterboard. In bulk package.
Material: Polyethylene (HD).
P125020
TP0
White
5.5/16.5
20000
7315881000708
10000004
1000 708
P125019
TP1
Yellow
5.5/22
20000
7315881001705
10000017
1001 700
P125018
TP2
Red
5.5/35
14000
7315881003709
10000033
1003 706
P125019
TP1
Yellow
5.5/22
50000
7315881001804
10000019
1001 809
P125018
TP2
Red
5.5/35
20000
7315881003808
10000035
1003 805
P89050
TP 6x30
Red
6/30
20000
7315881003815
10000036
1003 815
P125017
TP2B
Brown
8/40
16000
7315881005802
10000049
1005 800
P125016
TP3
Blue
10/45
10000
7315881006809
10000062
1006 808
P125015
Bulk/carton
TP4
Green
12/60
5000
7315881007806
10000069
1007 806
Bulk/bag
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
4 (10)
Plugs
Cabling & Fixing
Thorsman Grepi TPH
High performance plugs
P124735
Description
P124734
The TPH Grepi plug range includes high-performance wall plugs for
demanding installations.
The nylon plug has a soft outer skin made of thermoplastic rubber. This
outer skin acts as a shock absorber and also greatly improves the performance of the plugs in low-density concrete and softer brick materials.
The range consists of two different plug lengths, both with a diameter of
Ø10 mm. The long plug with a length of 110 mm is suitable for through
installation, whereas the short plug with a length of 67 mm is suitable for
regular plug installation.
Both plugs are provided with a specially designed acid-proof C5M screw,
72 or 115 mm long. The short plug is also available without screw. All
screws have a Torx T30 recess.
The plugs are suitable for concrete, stone, low-density concrete, expanded
clay (Leca), hollow blocks, hollow bricks and solid bricks.
Benefits
•
•
•
•
•
•
•
High load values
Easy to install
Self-centering design of the screw
Varying temperature range
Shock-absorbing design
Soft outer thermoplastic skin prevents rotation
Acid proof C5M stainless steel screw with Torx T30 recess
Material data
Material
PA6 (Polyamide 6) with TPR (Thermoplastic rubber) outer
skin
Temperature range
From -20 to +60°C.
Installation
Fig. 1
P124669
We recommend the use of a hammer drill bit in concrete, but in low-density
concrete a regular drill bit should be used. Clean the hole before inserting
the plug. TPH Grepi plugs can be used both as a regular plug (see Fig. 1)
and for through installation (see Fig. 2). The screw installs manually or with
a cordless screw-driver using a T30 bit.
Fig. 1:
• Minimum drill depth 70 mm when using the short 72 mm screw and an object of maximum 10
mm thickness. Adjust the drill depth accordingly if the object is thinner than 10 mm.
• Minimum drill depth 70 mm when using the long 115 mm screw and an object of maximum 45
mm thickness. Adjust the drill depth accordingly if the object is thinner than 45 mm.
Fig. 2:
Fig. 2
P124670
Through installation: The drill depth plus the thickness of the object must be minimum 120 mm.
Recommended load 1)
Technical data
Concrete C25
Type
Plug Ø x plug length
mm
IMT39081 TPH-10x67WS
Drill Ø
mm
Min. drill depth
mm
10
70
Min. drill depth
incl. fixture
mm
Low-density2) concrete (500
grade) and expanded clay
kN
Max. thickness
of fixture
mm
Pull-out
Shear
Pull-out
Shear
10
0.8
1.0
0.6
0.7
kN
IMT39082 TPH-10x67WS
10
70
10
0.8
1.0
0.6
0.7
IMT39083 TPH-10x67WLS
10
70
45
0.8
0.3
0.6
0.3
IMT39084 TPH-10x67
10
70
-
-
-
-
-
IMT39085 TPH-10x110WS
10
120
50
0.8
0.3
0.6
0.3
IMT39086 TPH-10x110WS
10
120
50
0.8
0.3
0.6
0.3
Safety factor for pull-out load 3 and shear load 2.5.
2)
Low-density concrete might also be called lightweight or aerated concrete.
1)
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
5 (10)
Plugs
Cabling & Fixing
Thorsman Grepi TPH
High performance plugs
Range
Type
Screw
length (mm)
Colour
Dimensions
Ø/length (mm)
Qty per
package
EAN code
Internal
ID-No.
Ref. No.
P117750
P117749
Plug with screw
High-performance plug with specially designed acid-proof C5M screw. Suitable for regular plug installations.
Material: PA/TPR.
TPH-10x67WS
TPH-10x67WS
72
72
Green/black
Green/black
Ø10/67
Ø10/67
4
20
3606480302145
3606480302152
20063301
20063302
IMT39081
IMT39082
TPH-10x67WLS
115
Green/black
Ø10/67
20
3606480302169
20063303
IMT39083
3606480302183
3606480302190
20063305
20063306
IMT39085
IMT39086
3606480302176
20063304
IMT39084
High-performance plug with specially designed acid-proof C5M screw. Suitable for through-installations.
Material: PA/TPR.
TPH-10x110WS
TPH-10x110WS
115
115
Green/black
Green/black
Ø10/110
Ø10/110
4
20
P117748
Plug without screw
High-performance plug without screw. Suitable for regular plug installations.
Material: PA/TPR.
TPH-10x67
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
—
Green/black
Ø10/67
20
6 (10)
Plugs
Cabling & Fixing
Thorsman TPS
Nail plugs
P124779
Description
Thorsman TPS is a range of nail plugs for all types of through installation.
Applications
All types of through installation, such as electrical trunking, switches,
battens and cable clamps.
Suitable for concrete, stone, low-density concrete, expanded clay, hollow
blocks and bricks, solid bricks and plasterboard.
Benefits
P101487
•
•
•
•
•
Removable hammer-in fixing
Fast installation
Powerful expansion – high load values
Complete range for electrical installations
Through fixing
Material and operative data
Plug
Screw nail
Temperature range
PA (polyamide)
Steel, electroplated
From -40° to +80°C
M10030
M10050
Installation
Clean the hole and install the
plug.
M10060
Drill through the fixture straight
into the base material. Use drill
size in accordance with the
table.
M10060
Hammer home.
Easy to remove, unscrew the
screw nail.
Technical data (1 kN approx. 100 kg)
Recommended load Shear/pull-out1)
Type
Plug
Drill Ø/max. fixture thickness
x plug length
mm
Ø mm
Screw nail
Ø mm
mm
mm
TPS-4/5x25
4
2.5
30
5
0.15/0.05
0.15/0.05
—
TPS-4/15x35
4
2.5
40
15
0.15/0.05
0.15/0.05
—
Min. drill depth Max. thickness
including fixture of fixture
Concrete C25 Solid brick
kN
kN
Low-density2) concrete (500
grade) and expanded clay, kN
TPS-5/5x35
5
3
42
5
0.3/0.1
0.3/0.1
—
TPS-5/20x50
5
3
57
20
0.3/0.1
0.3/0.1
—
TPS-6/5x35
6
3.5
42
5
0.4/0.2
0.4/0.2
0.1/0.07
TPS-6/20x50
6
3.5
57
20
0.4/0.2
0.4/0.2
0.1/0.07
1)
2)
Safety factor 4.5 for shear and 6 for pull-out load.
Low-density concrete might also be called lightweight or aerated concrete.
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
7 (10)
Cabling & Fixing
Plugs
Thorsman TPS
Nail plugs
Range
Type
Colour
Dimensions
Ø/Length (mm)
Qty per
package
EAN code
Internal
ID-No.
Ref. No.
P125701
P125704
P125699
Nail plug for all types of through installation, such as electrical trunking, switches, battens, cable clamps, door and window
frames. Suitable for concrete, stone, low-density concrete, expanded clay, hollow blocks and bricks, solid bricks and plasterboard.
Material: PA (polyamide).
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
TPS-4/5x25
Clear
Ø7/45
100
7315881149308
10000202
1149 301
TPS-4/15x35
Clear
Ø7/55
100
7315881149353
10000203
1149 350
TPS-5/5x35
Clear
Ø10/60
100
7315881149605
10000204
1149 608
TPS-5/20x50
Clear
Ø10/75
100
7315881149704
10000209
1149 707
TPS-6/5x35
Clear
Ø10/60
100
7315881150007
10000214
1150 002
TPS-6/20x50
Clear
Ø10/75
100
7315880100027
10000218
1150 051
8 (10)
Cabling & Fixing
Plugs
Thorsman TCP
Clip plugs
P124779
Description
Thorsman TCP is a range of clip plugs for the installation of cable clips and
nails.
Applications
Installations of TC clips, TKK/APK clamps and nails.
Suitable for concrete, stone, low-density concrete, expanded clay, solid
bricks and plasterboard.
Benefits
• Permits nailing of clips and clamps in masonry materials
Material and operative data
Material
Temperature range
PS (polystyrene, impact-resistant)
From -40° to +70°C
In light-weight concrete, simply
hammer in the clip plug. If the
surface is plastered, filled or
painted – make the start of a
hole first.
P76883
P76887
P76886
Installation
In concrete, brick and other
hard materials, drill first.
In single plasterboard
sheets, make a hole
with an awl. In double
plasterboard sheets, it
is sufficient to start a
hole.
Range
Type
Colour
Dimensions
Ø/Length (mm)
Qty per
package
EAN code
Internal
ID-No.
Ref. No.
P125428
TCP-0
White
7.5/18
100
7315881140008
10000191
1140 003
P60845
Clip plug for the installation of cable clips and nails. Suitable for concrete, stone, low-density concrete, expanded clay, solid bricks
and plasterboard.
Material: PS (polystyrene).
TCP-1
Yellow
7.5/25
100
7315881141005
10000197
1141 001
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
9 (10)
Plugs
Cabling & Fixing
Thorsman QUICKITM TPN
Universal plugs
P1378
Description
Thorsman QUICKI TPN is a range of universal wall plugs with fully threaded screws for all types of building material.
Applications
TPN can be used in most situations where shear loads are dominating.
Suitable for concrete, natural stone, low-density concrete 500 (not in
porous low-density concrete 400-450), expanded clay, hollow blocks and
bricks, solid bricks and plasterboard.
Benefits
• Universal fixing providing great expansion and secure fixing in all
building materials
P1379
• Both fixing and screw included in the package
• Fully threaded screw – even thin objects can be fixed
• Two sizes cover all situations
Material and operative data
Material
Fixing: Modified PA (polyamide)
Screw: Steel, hardened and bright galvanized
From -20° to +80°C
Temperature range
P112236
Installation
Range
Type
Colour
Dimensions
Ø/Length (mm)
Qty per
package
EAN code
Internal
ID-No.
Ref. No.
P77796
Universal wall plug including fully threaded screw, for all types of building material. Suitable for concrete, natural stone, lowdensity concrete 500 (not in porous low-density concrete 400-450), expanded clay, hollow blocks and bricks, solid bricks and
plasterboard.
Material: PA (polyamide) and steel.
TPN-6x35
Grey
6/35
25
7315881051007
10000120
1051 007
TPN-8x50
Grey
8/50
25
7315881052004
10000121
1052 004
Min. board
thickness
mm
Technical data (1 kN approx. 100 kg)
Type
Ø x length
Screw size
ØxL
Drill
Min. drill
depth
mm
mm
Ø mm
mm
Max.
thickness
of fixture
mm
TPN-6x35
4x50
6
50
16
9
TPN-8x50
5x60
8
60
12
3
Recommended load: Shear/pull-out 1)
N
Low-density2) con- Plasterboard
crete 500 and ex13 mm
panded clay, N
N
Plasterboard
2x13=26 mm
N
500/100
200/60
180/60
260/80
600/150
250/80
200/60
350/140
Concrete C25
Safety factor 4.5 for shear and 6 for pull-out load.
2)
Low-density concrete might also be called lightweight or aerated concrete.
1)
Release date: 2012-01-12
Rev. Date:
Doc. No: 20076750
10 (10)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising