Fig 1: 30W
Ka-BAND BUC
30W to 80W
SSPB-3010Ka
series
FEATURES




Converts L-Band signal Ka-Band from 28.5 – 31 GHz (in
bands)
Meets the requirements per MIL-STD-188-164A
Integrated amplifier with an output power of 30W to 80W
Phase-locked oscillator to external 5MHz or 10MHz
reference (configurable)
High linearity (low intermodulation products)
Weatherproof package
Remote Monitor & Control
Protection against thermal runaway and out-of-lock
conditions
Output sample monitoring port
Detachable power supply
Compact packaging
CE Marking




OPTIONS
Ethernet interface
Internal High Stability Reference with auto-sensing
Extra Low Phase Noise
Redundant system








Fig 1: 40W
Fig 1: 30W
OVERVIEW
The SSPB-3010Ka series are hub-mount up-converter transmitters,
operating in the Ka-Band. The SSPB-3010Ka is an integrated unit, complete
with detachable power supply, phase-locked oscillator, mixer, filter and
cooling mechanism. Intended for outdoor operation, the SSPB-3010Ka
provides the utmost in convenience and efficiency. Other SSPB’s are also
available for higher powers or for operation at other up-link frequencies.
APPLICATION
®
The SSPB-3010Ka are designed for Ka-band satellite up-link applications.
They are mounted outdoors, near the hub of an antenna. Also available from
Advantech AMT™ are the SSPA series - solid-state high power amplifiers with all the features of the SSPB’s except block up-converter. Please contact
Advantech AMT™ for more information.
Fig 2: 80W
Table A
Band
REDUNDANCY
RF Band
(GHz)
IF Band
(MHz)
K1
29.5 – 30.0
The SSPB-3010Ka series are available in redundant configuration with
single Monitor and Control interface.
1000 – 1500 MHz
Option 950 – 1450 MHz
K2
28.8 – 29.1
1000 – 1300 MHz
K3
30 – 31
K4
29.5 – 31
(29.5 – 30/30 – 31)
1000 – 2000 MHZ
Option 950 – 1950 MHz
Dual band
www.servsat.com
www.
950 – 1450/1000- 2000 MHz
Other operating bands available
Ka-BAND HUB-MOUNT
BLOCK-UP CONVERTER 30W / 80W
SSPB-3010Ka
series
TECHNICAL SPECIFICATIONS
30W
40W
50W
60W
80W
Electrical Characteristics
Input/Output Frequency range
Frequency sense
Output power (PSAT)
+45 dBm
Output power (P1dB) min.
Linear Power (P Linear)
Conversion gain @ maximum setting
Gain slope
Gain flatness
Gain variation over temperature
Gain variation over 24 hours
Gain adjustment range
Input VSWR
Output VSWR
Spurious at rated power
AM/PM conversion
Noise Power Density max.
Third order IMD (2 equal tones 5MHz apart)
Phase Noise
Group Delay
External reference
Reference frequency
Reference frequency phase noise
Reference frequency level
Power Requirements
AC input voltage
Power consumption,
at Linear Power
(nominal)
at Saturation
Mechanical Characteristics
Dimensions (L x W x H)
Weight
Interfaces:
See table A on front page
(for dual band, the operating band is selectable via the M&C port)
Non-inverting
+46 dBm
+47 dBm
5MHz/10 MHz site configurable
-115 dBc/Hz at 10 Hz
-135 dBc/Hz at 100 Hz
-148 dBc/Hz at 1000 Hz
0 dBm ± 5 dB
95 – 265 VAC (47-63 Hz)
350W
400W
400W
500W
+49 dBm
+48 dBm
+45 dBm
68 dB min
-150 dBc/Hz at 10 kHz
-160 dBc/Hz at 100 kHz
600W
800W
18.5” x 9.8” x 7.7”
470 x 250 x 196 mm
26.4 lbs (12kg)
N-Type (f)
Redundancy
MS3112E16-26P
MS3112E12-10P RS-232
MS3112E10-6P
MS3102E20-19P RS-485
MS3112E10-6P
RF input
Discrete port
AC Line
Environmental Conditions
Temperature
Operating
Storage
Humidity
Altitude
+48 dBm
+44 dBm
+45 dBm
+46 dBm
+47 dBm
+41 dBm
+42 dBm
+43 dBm
+44 dBm
65 dB min
65 dB min
+68 dB min
68 dB min
0.04 dB/MHz, max
±2.0 dB max over 1000 MHz, ± 0.6 dB over 40 MHz
±1.5 dB over full operating range
±0.25 dB max at constant temperature & drive level
20 dB min (1 dB steps)
1.4:1
1.3:1
-55 dBc max
<2/dB @ P Linear
In band: -75 dBm/Hz; Out-of-band: -130 dBm/Hz (@ max gain)
-25 dBc max @ PLINEAR note 1
Exceeds MIL-STD-188-164A by 2 dB typically
Linear:
0.02 nsec/MHz max.
2
Parabolic: 0.003 nsec/MHz max.
Ripple:
1 nsec p-p max.
700W
900W
800W
1000W
18.5” x 13” x 7.7”
470 x 330 x 226 mm
48.5 lbs(22 kg)
RF output WR28 cover flat
-30C to +55C Option 1: -40C to +60C; Option 2: -50C to +50C
-55C to +85C
100%, condensing (2” rain/hour)
10,000’ AMSL, derated 2°C/1,000’ from AMSL
Note 1: P-Linear is defined as the worst case of a Modulated single carrier – maximum power for which the sidebands located at
1.5 times the symbol rate are 30 dB below the main lobe using QPSK modulation, or Modulated single carrier – maximum power for
which the sidebands located at 1.0 times the symbol rate are 30 dB below the main lobe using OQPSK modulation, or Two-tone
CW test – maximum power for which the third order sidebands are 25 dB below the combined power of the two carriers
* Other frequencies are available. Please consult Sales Representatives
SOUTH AMERICA
USA
Tel: + 1 703 788-6882
Fax: +1 703 788-6511
info.latam@advantechwireless.com
NORTH AMERICA
USA
Tel: + 1 703 788-6882
Fax: +1 703 788-6511
info.usa@advantechwireless.com
EUROPE
UNITED KINGDOM
Tel: +44 1480 357 600
Fax: +44 1480 357 601
info.uk@advantechwireless.com
CANADA
Tel: +1 514 420-0045
Fax: +1 514 420-0073
info.canada@advantechwireless.com
BRAZIL
RUSSIA & CIS
Tel: +55 11 3054 5701
Tel: +7 495 971 59 18
info.russia@advantechwireless.com Fax: +55 11 3054 5701
info.brazil@advantechwireless.com
Specifications are subject to change without notice
An ISO 2001 2008 Company
Ref.: PB-SSPB-3010Ka-30-80-11304
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising