Red Lion CL01 Operator Interface Terminals for Banner Presence

Red Lion CL01 Operator Interface Terminals for Banner Presence
Bulletin No. CL01B-A
Drawing No. LP0537
Released 11/01
MODEL CL01 - SUPPORTING BANNER PRESENCE PLUS VISION SYSTEMS PARADIGM 2 X 20 LCD OPERATOR INTERFACE TERMINAL
The diskette included with this shipment includes the
Banner PresencePLUS load utility, EDICT driver, and
application note. Please read and follow the instructions in
the application note for loading and using the Banner
PresencePLUS load utility and EDICT driver.
DESCRIPTION
The Paradigm operator interface Model CL01 was designed to meet the
industrial demands of application power, versatility, reliability, and ease of use.
The CL01 has provisions, common to all Paradigm Family products, allowing
for future product upgrades as new options and capabilities are developed.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use this unit to directly command motors, valves, or other actuators
not equipped with safeguards. To do so, can be potentially harmful to persons or
equipment in the event of a fault to the unit.
CAUTION: Read complete instructions prior to
installation and operation of the unit.
DIMENSIONS In inches (mm)
!
2 LINE X 20 CHARACTER LIQUID CRYSTAL DISPLAY
WITH LED BACKLIGHT
!
100 ALARM POINT LOGGER
!
RECIPE HANDLING
!
UNLIMITED PASSWORD PROTECTION
!
REAL TIME CLOCK, BATTERY BACKED
!
EXPRESSION EVALUATION
!
32-BIT MATH
!
DIRECT PLC COMMUNICATION
!
NEMA 4/IP65
UL Recognized Component,
File # E179259
SPECIFICATIONS
1. POWER REQUIREMENTS: 11 to 30 VDC @ 2.5 W
Power Up Current: 2.5 A for 1 msec max.
Must use a Class 2 or SELV rated power supply.
2. DISPLAY: 2 lines of 20 characters, 0.197" (5 mm) high liquid crystal display
with bright LED backlight.
3. KEYPAD: 3 screen legendable soft keys, numeric pad with raise, lower, next,
previous, enter, delete, exit, alarms and mute keys.
4. MEMORY: 128 K (64 K user) battery backed RAM (Battery life expectancy 7
years 50/50 on/off cycle) Optional factory fit expansion to 512 K (448 K user).
5. PHYSICAL DIMENSIONS: L = 6.69" (170 mm), H = 5.12" (130 mm),
D = 2.2" (56 mm.)
ORDERING INFORMATION
MODEL NO. DESCRIPTION
CL01
PART NUMBER
LCD, 2 X 20, 3 Soft keys, 128 K memory,
supporting Banner PresencePlus vision systems
LCD, 2 X 20, 3 Soft keys, 512 K memory,
supporting Banner PresencePlus vision systems
EDICT-97 Development Kit. Includes Software,
Manual and 9-pin RS232 Programming cables
Banner PresencePlus Communications Cable
Port 1 adapter cable
Port 1 adapter cable, din rail mountable
Communication Cables
Battery Replacement
PANEL CUT-OUT
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
CL010050
CL010060
SFEDT
P895064Z
P890807Z
P890808Z
P895xxxZ
BAL3R004
6. CONSTRUCTION: Steel rear metal enclosure with NEMA 4/IP65
aluminum front plate when correctly fitted with the gasket provided. This
unit is rated for NEMA 4/IP65 indoor use. Installation Category I, Pollution
Degree 2.
7. MOUNTING REQUIREMENTS: Max. panel thickness is 0.375" (9.5 mm).
For NEMA 4/IP65 sealing, a steel panel with a minimum thickness of 0.125"
(3.175 mm) is recommended.
8. ENVIRONMENTAL CONDITIONS:
Operating Temperature: 0 to 40°C
Storage Temperature: -20 to 80°C
Operating and Storage Humidity: 80% max. relative humidity
(non-condensing) from 0°C to 40°C.
Altitude: Up to 2000 meters
9. CERTIFICATIONS AND COMPLIANCES:
SAFETY
UL Recognized Component, File #E179259, UL3101-1, CSA 22.2 No.1010-1
Recognized to U.S. and Canadian requirements under the Component
Recognition Program of Underwriters Laboratories, Inc
Type 4 Enclosure rating (Face only), UL50
IECEE CB Scheme Test Certificate #UL2795A-179259/USA
CB Scheme Test Report #98ME60993-000098
Issued by Underwriters Laboratories Inc.
IEC 1010-1, EN 61010-1: Safety requirements for electrical equipment for
measurement, control, and Laboratory use, Part 1
IP65 Enclosure rating (face only), IEC 529
ELECTROMAGNETIC COMPATIBILITY
EN 50081-2 : 1994
EN 50082-2 : 1994
EN 55022-B : 1995
Electromagnetic Compatibility Directive
Generic Emission Standard
Part 2 : Industrial Environment
Electromagnetic Compatibility Directive
Generic Immunity Standard
Part 2 : Industrial Environment
Limits and Methods of Measurement of Radio
Disturbance Characteristics of Information
Technology Equipment
10. WEIGHT: 1.6 lbs. (0.72 Kg)
INPUT/OUTPUT COMMUNICATIONS SPECS
1. SERIAL PORTS: Data Format and Baud Rates for each port is individually
software programmable up to 19200 baud, except for the Banner PP, which
will communicate at 115 kBaud.
Port 1: Programming Port - RS-232 on an RJ-11 jack.
Port 2: RS-232 Port on a Plug-In Screw Terminal Block
Port 3: RS-485 Port on a Plug-In Screw Terminal Block
(Up to 29 Units can be connected and individually addressed.)
Note: LED Indicators show communications status on Ports 2 & 3
2. COMMUNICATION MODES: Any of the three ports can be used to
communicate with Serial Devices.
Model - (CL01) only one of Ports 1, 2, and 3 may be configured.
Exception Red Lion Controls Instrument, simple ASCII Printer, PC Link
Network, Program Through, External Keyboards, Banner Presence
Plus Visions Systems and Roll-Your-Own Protocols can be used with
other protocols on Port 1.
COMMON FEATURES FOR CHARACTER BASED OPERATOR TERMINALS
PROGRAMMABILITY
SECURITY
Event Driven Configuration Tool
The password protection scheme provides the ultimate in tamper-proof
capability. Access can be limited on a unit, page, recipe, or even individual data
entries.
Edict 97, an extremely powerful Windows 98/95/3.11 based software
program, provides for the intuitive configuration of every aspect of the operator
interface’s behavior. The requirement for time consuming PLC ladder logic is
drastically reduced by the unique event driven approach of EDICT 97. The
capability of this program, in conjunction with the PLC and the Paradigm
operator interface unit, ensures a great deal of advanced functionality for your
system. This powerful PLC/Paradigm system provides many of the capabilities
and features normally associated with the more complicated and costly
PC/SCADA systems. Display pages are easily generated, including PLC and
internal variables, text strings, or bar charts. All dynamic elements are also
available as alarms, recipes, triggers, and reports, for the run time software.
After completion of the programming, the program is directly downloaded to
the operator interface from your PC, without any compiling or saving
requirement. When you require a change in your program, EDICT 97 loads only
the change, not the entire program, saving valuable on-line time.
DYNAMIC DISPLAY PAGE ELEMENTS
Each display page has provisions to show static and dynamic information,
including data variables, text messages, time, and date.
Data Variables can be either PLC derived or internally generated, either in data
entry or display only mode. The Paradigm unit has an extremely powerful
math capability, allowing the operator to manipulate the variables to meet the
specific application’s demands. If required, the display can be formatted to
BCD, binary, hex, floating point, and string. Upper and lower limits of data
entry variables are fully supported and able to be password protected.
Text Message Animation enables several different types of animated text from
a local or global message table to be displayed. The message displayed is
dependent on the condition of the particular controlling expression. The
controlling expression may be a PLC bit level, a timer value, preset counter
condition, or any one of a wide variety of message triggers.
Time and Date in the Paradigm unit has the capability to display in any
combination of year, month, day, hours, minutes, and seconds.
Bar Graphs in horizontal format are easily attached to data variables. The
partial or full length bar graph displays can be scaled and offset to optimize
the required display effect.
ALARMS
The Paradigm unit can monitor and log from 100 to 500 alarms, depending
on model. Such triggers as a simple bit level transition, a PLC coil activation,
or a complex application algorithm can activate an alarm. The alarms can be
time and date stamped, with an automatic screen display and/or downloading to
a printer for hard copy recording purposes.
REAL TIME SCHEDULE
Real time schedule allows for repetitive or one time task to take place in the
system. Typically a schedule action similar to...At 1:55 PM on Monday,
Wednesday, and Friday, print the production report...is required in the
application. In conjunction with the recipe capabilities, a downloading of a
special recipe can be requested by the real time schedule feature.
USER PROGRAMS
This feature offers the user the ability to incorporate custom application
requirements via a powerful program language. For example, a program
designated “Calculate Volume” which determines the amount of fluid in a round
tank at specific temperatures could be created. This program would be triggered
to run and display each time the page denoted as “Volume Now” is requested.
The ability to customize to your application’s specialized needs is easily
solved with the user program capability.
KEYBOARD EDITING
All the interface keys can be programmed to perform virtually unlimited
functions with each key, having multiple actions assigned to three types of key
events: key pressed, key held down (auto repeat), and key released. Typical key
actions would be Go to page, set value, load recipe, view alarms, print report,
and many more.
COMMUNICATIONS
With over 70 communication drivers available, the Paradigm operator
interface offers a wide range of connectivity including: PLCs, Variable Speed
Drives, Temperature Controllers, Bar Code Readers, etc.
Utilizing real PLC data references, the automatic comms configuration
optimizes the system’s communication performance. In the event that your
specific driver does not appear on the Paradigm drivers list, let us know, as this
list is always being expanded to meet our customers’ needs.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
HARDWARE INFORMATION
INSTALLATION & CONNECTIONS
This bulletin contains a variety of information related to the installation and
operation of the Operator Interface supplied. Ideally, you should read this
document thoroughly before attempting to use the equipment. For information
about the software aspects of the terminal, please consult other documentation.
The unit meets NEMA 4/IP65 requirements for indoor use, when properly
installed. The units are intended to be mounted into an enclosed panel.
CONTENTS OF PACKAGE
The Operator Interface is supplied in a packaging box containing the
following...
! The interface terminal itself.
! A NEMA 4/IP65 rated mounting gasket.
! A bag containing panel hardware.
! This hardware bulletin.
! Inspection Load Utility plus EDICT driver and application note.
! If any of these items are missing, please contact your supplier
immediately.
POWER SUPPLY REQUIREMENTS
The Operator Interface requires an 11 to 30 VDC power supply rated at 2.5
W unless otherwise stated on the label.
! The terminal may take as little as 100 mA in certain circumstances, so
be sure that the chosen power supply can operate correctly with this
load. Large switch-mode supplies tend to need a certain minimum load
before they will operate correctly.
In any case, it is very important that the power supply is mounted correctly if
the unit is to operate reliably. A very high proportion of reported problems are
caused by incorrect power supply installation, so please take care to observe the
following points...
! The power supply must be mounted close to the unit, with usually not
more than 6 feet of cable between the supply and the Operator Interface.
Ideally, as short a length as is possible should be used.
! The wire used to connect the Operator Interface’s power supply should
be of at least 22 gage wire. If a longer cable run is used, you should use
heavier gage wire. The routing of the cable should be kept away from
large contactors, inverters and other devices which may generate
significant electrical noise.
BATTERY BACKUP ISSUES
The Operator Interface is supplied with a Lithium Battery designed to
maintain the internal memory and real-time clock during power outages.
Assuming the operator interface terminal is powered up for 50% of the time,
this battery should last over 4 years. A “Battery Low” system variable is
available so that the programmer can choose specific action(s) to occur when
the battery voltage drops below its nominal voltage.
It is possible to replace the battery without losing the contents of the Operator
Interface’s memory, but this does not reduce the importance of ensuring that a
copy of the terminal’s configuration is kept readily at hand to allow the terminal
to be re-loaded in the case of mishaps. Please remember that although an image
of the database contents can be uploaded, this file is not editable, so the
importance of keeping a copy on disk cannot be over stressed.
Installation Environment
The unit should be installed in a location that does not exceed the maximum
operating temperature and provides good air circulation. Placing the unit near
devices that generate excessive heat should be avoided.
Continuous exposure to direct sunlight may accelerate the aging process of
the bezel. The bezel should be cleaned only with a soft cloth and neutral soap
product. Do NOT use solvents.
Do not use tools of any kind (screwdrivers, pens, pencils, etc.) to operate the
keypad of the unit.
MOUNTING INSTRUCTIONS
The Operator Interfaces are designed for through-panel mounting. A
neoprene gasket is provided, to enable sealing to NEMA 4/IP65 specification.
The panel cut-out diagram for the model supplied is provided. All mounting
holes should be drilled for 0.14" (3.5 mm) clearance. Care should be taken to
remove any loose material from the mounting hole to avoid such metal falling
into the Operator Interface itself during installation.
CONNECTING TO A PLC
The Operator Interface is designed to operate with a PLC. A serial
communication connection must be made between the operator interface
terminal and PLC, and the details of this connection vary according to which
PLC is used.
The following section lists the connection details for the PLC to be used .
PLC TYPE
Details on how to connect to most PLCs are available on request from RLC.
CONNECTING TO AN IBM ® PC/AT
The Operator Interface is programmed via software running on an IBM
PC/AT or a compatible computer. The connection between the PC/AT and the
operator interface terminal is made via a custom cable provided with the EDICT
Developer’s Kit. The cable is designed for a 9-way serial port. Please contact
your supplier if you require a 25-way version.
PROGRAMMING PORT PIN OUT
The Operator Interface’s programming port is sometimes used to connect
other RS-232 devices, such as printers. The following illustration and table
gives the pin-out of this port to enable such connections to be made.
CHANGING THE BATTERY
To change the internal battery, follow these steps...
! Remove the power and PLC communications connector from the unit.
! Remove the four screws from the rear cover, and remove the rear cover.
! If you wish to avoid losing the terminal’s configuration, reconnect the
power connector and re-apply power. Note that this will require the
panel to be powered-up and, as such, only suitably qualified staff should
carry out this procedure.
! The battery is located in a holder on the main circuit board. This should
be clearly visible. Remove the battery from its holder.
! Place the new battery in the holder. The terminal’s power supply can
now be disconnected, if you re-applied power in the step above.
! Replace the lid, screws and connector by following the above procedure
in reverse. You may like to make a note of the date the battery was
replaced to allow planned maintenance to be carried out.
! If you did not keep the unit powered-up during battery replacement, hold
down the EXIT and MUTE keys on the keyboard and cycle power.
Release the keys and follow the menu guides to clear the memory. The
unit is now ready for a configuration database to be reloaded.
Please note that the old battery must be disposed of in a manner which
complies with your local waste regulations. Also, the battery must not be
disposed of in fire or in a manner whereby it may be damaged and its contents
come into contact with human skin.
Rear View of Unit
The above table denotes the pin names of the programming port. When
connecting, the pin name at the programming port is connected to the opposite
of that pin name at the destination device.
TROUBLESHOOTING
For further technical assistance, contact technical support at the appropriate
company numbers listed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
© 2001, RED LION CONTROLS, ALL RIGHTS RESERVED.
Information in this document is subject to change without notice and does not represent a commitment by Red Lion
Controls. Software, which includes any database supplied therewith, described in this document may be furnished subject
to a license agreement or a nondisclosure agreement. It is against the Law to copy the software except as specifically
allowed in the license or nondisclosure agreement. No part of this document may be reproduced in any form or by any
means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written
permission of Red Lion Controls.
PowerPoint and Windows are registered trademarks of Microsoft Corporation. Other product and company names
mentioned herein may be the trademarks of their respective owners.
Disclaimer
Red Lion Controls, hereinafter referred to as RLC, will under no circumstances be responsible for direct, indirect,
special, incidental or consequential damages, death or personal injury arising from the use or misuse of all or part of this
documentation or the products and software described herein. Notwithstanding the above, RLC does not exclude any
liability for death or personal injury caused by its negligence.
RLC does not warrant any of its software products to be free from error or to be fit for any particular purpose. Neither
is the software guaranteed to provide operation without interruption. The customer's sole remedy in case of failure is the
refund of the purchase price of the software.
The customer, in applying the products and software described herein, accepts that the products are wholly or partly
programmable electronic systems that are inherently complex and which cannot thus be guaranteed to be free of errors. In
doing so, the customer accepts the responsibility to ensure that the products are correctly programmed, configured,
installed, commissioned, operated and maintained by competent and suitably trained staff and according to any instructions
or safety instructions provided and as dictated by good engineering practices.
This documentation, and the software and products described herein, is subject to continuous development and
improvement. All information is given in good faith, but RLC shall not be liable for any omissions or errors herein or
within the software herein described.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising