IDS-5011F
Industrial Device Server 1-Port Device Server
v1.5 / Dec, 2011
Industrial 1-port secure serial to Ethernet device server with
1xRS-232/422/485 and 1x100Base-FX
Industrial
Ethernet Switch
IDS-5011F
Features
Industrial
Media Converter
▪ Operating Modes: Virtual Com, Serial Tunnel, TCP Server,TCP Client, UDP
▪ Redundant multiple host devices :
5 host devices : Virtual COM, TCP Server, TCP Client mode;
4 IP ranges : UDP
▪ NAT Pass-Through : the user can manage IDS-5011F through NAT router
▪ Security: SSL data encryption; secured management by HTTPS and SS
H: IP Access: IP White List
Industrial
Device Server
▪ Internet Communication: PPPoE
▪ Update DNS Hostname: DDNS
▪ Event Warning by Syslog, Email, SNMP trap, and Beeper
▪ Configurable by Web-based and Windows utility (DS-Tool)
▪ Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA
(32bit/64bit) /Windows 7(32bit/64bit)
IDS-5011F provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide
operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-5011F could operate in the harsh industrial environment. Therefore IDS-5011F is the
best solution to the high demand of secure serial to Ethernet critical data communication.
Industrial Cellular
VPN Router
IDS-5011F is an innovative secure 1-port RS-232/422/485 to 1-port optic fiber Ethernet port secure serial to Ethernet device server featuring the
standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition,
the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and
PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem
remotely. On the other hand, IDS-5011F can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC
fails. Further, IDS-5011F features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
Industrial Wireless
Access Point
Introduction
Practical Operation
NAT Router
Accessories
In practical operation of serial device servers, Windows utility (DS-Tool) is supported. This utility is very helpful for you to manage and monitor all of
industrial device servers in the industrial network.
NAT Router
VCOM
Windows Utility
IDS-5011F
RS232/422/485
IMC-121FB
IDS-5011F
RS232/422/485
Fiber
LAN
Serial
Fiber
LAN
Serial
PLC
PLC
Multiple Host PCs
NAT Router Pass-Through
D esigned for Rugged Exce llence
Network
Management Software
IMC-121FB
3-11
Industrial Device Server 1-Port Device Server
v1.5 / Dec, 2011
Fiber
LAN
Serial
Data Encryption
Data Encryption
IMC-121FB
IDS-5011F
RS232/422/485
Fiber
LAN
Serial
3
Data Encryption
IDS-5011F
RS232/422/485
IMC-121FB
Industrial Device Server
SSL Encryption
PPPoE and DDNS
Fiber
LAN
Serial
IDS-5011F
RS232/422/485
TCP Server
IDS-5011F
RS232/422/485
TCP Client
TCP Server/Client Mode
DS-Tool (Windows Utility): Monitoring and Configuration interface
Dimensions
Unit=mm
3-12
w w w.oring-net wo rk i n g. co m
Industrial Device Server 1-Port Device Server
v1.5 / Dec, 2011
1 2 3 4 5
RS-232
RS-422
RS-485
( 4 wire )
RS-485
( 2 wire )
1
DCD
RXD -
RXD -
-
2
RXD
RXD +
RXD +
-
3
TXD
TXD +
TXD +
DATA +
4
DTR
TXD -
TXD -
DATA -
5
GND
GND
GND
GND
6
DSR
-
-
-
7
RTS
-
-
-
6 7 8 9
8
CTS
-
-
-
DB9(male) connector
9
RI
-
-
-
Industrial
Media Converter
Pin #
Industrial
Ethernet Switch
Pin Assignment
RS-232 mode act as DTE
Specifications
IDS-5011F-MM-SC
IDS-5011F-SS-SC
Fiber Ports
Fiber Ports Number
1
1
Fiber Ports Standard
100Base - FX
100Base - FX
Fiber Mode
Multi-mode
62.5/125 µm
50/125 µm
SC
Single-mode
2 km
30 km
Wavelength (nm)
1310 nm
1310 nm
Max. Output Optical Power (dBm)
-14 dBm
-8 dBm
Min. Output Optical Power (dBm)
Max. Input Optical Power
(Saturation)
-23.5 dBm
-15 km
0 dBm
0 dBm
-31 dBm
-34 dBm
7.5 dB
19 dB
Fiber Diameter (µm)
Typical Distance (km)
SC
Serial Ports
DB9(male) x 1
Operation Mode
RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool / web interface
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
Accessories
Connector
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator
PWR 1(2) / Ready :
Red On : Power is on and booting up
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly
Green On : Power is on and functioning Normally
Green Blinking : Located by Administrator
D esigned for Rugged Exce llence
Network
Management Software
Network Features
Network Protocols
Industrial Cellular
VPN Router
Min. Input Optical Power
(Sensitivity)
Link Budget (dB)
9/125 µm
Industrial Wireless
Access Point
Fiber Optical Connector
Industrial
Device Server
ORing Device Server Model
3-13
Industrial Device Server 1-Port Device Server
v1.5 / Dec, 2011
100Base-FX with SC Connector
Green for port Link/Act at 100Mbps
Serial TX / RX LEDs
Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
3
Redundant Input Power
Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.)
4 watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristics
Industrial Device Server
Enclosure
IP-30
Dimensions (W x D x H)
72(W) x 29.4(D) x 123.4(H) mm (2.83x1.16x4.86 inch.)
Weight (g)
325 g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals
EMI
Shock
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,
EN61000-4-11
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
EMS
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )
1,068,579
Warranty
1,073,657
5 years
Ordering Information
I D S - 5 0 A B C - DD
Code Definition
Option
Serial Port Number
- 1: 1 port
Model Name
Available
Model
- 1: 1 port
Fiber Port Identification
- F : 100Base-FX
- "": 10/100Base-T(X)
Fiber Optical Mode
- MM: Multi-mode Fiber
- SS: Single-mode Fiber
Description
IDS-5011F-MM-SC
Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 1x100Base-FX, multi-mode, 2km/1310nm,
SC connector
IDS-5011F-SS-SC
Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 1x100Base-FX, single-mode, 30km/1310nm,
SC connector
Packing List
‧IDS-5011F
‧DIN-Rail Kit
‧Wall-mount Kit
‧ORing Tool CD
‧Quick Installation Guide
3-14
Ethernet Port Number
w w w.oring-net wo rk i n g. co m
Optional Accessories (Can be purchased separately)
‧DR-45 series, 45W DIN-Rail power supply
‧DR-75 series, 75W DIN-Rail power supply
‧DR-120 series, 120W DIN-Rail power supply
‧SDR-240-48, 240W DIN-Rail power supply
‧SDR-480-48, 480W DIN-Rail power supply
‧PAA-121000, 12VDC/1000mA 12W Power Adapter, US plug
‧PAE-121000, 12VDC/1000mA 12W Power Adapter, EU plug
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising