User Manuel: SL+ v2.0

User Manuel: SL+ v2.0
USER MANUEL: SL+ V2.0
31 octobre 2016
DNP Photo Imaging Europe
User Manuel: SL+ v2.0
Software version: 1.4.31.7
Photo Editing Software of SL-620: User Manual v2.0
1
USER MANUEL: SL+ V2.0
31 octobre 2016
TABLE OF CONTENTS
Table of Contents ..........................................................................................................................................................2
1 License Agreements, Terms & Conditions ..................................................................................................................3
2.0 Introduction .............................................................................................................................................................4
3.0 firmware upgrade ....................................................................................................................................................5
4.0 Print finishing surfaces.............................................................................................................................................7
5.0 Panoramic prints product ........................................................................................................................................8
6.0 Calendars (13 pages Simplex) ................................................................................................................................15
7 Photo filters ..............................................................................................................................................................20
8 DS 820 printer support .............................................................................................................................................21
8.1 DS 820 high quality media suport ..........................................................................................................................21
9.0 RX1 HS printer support ..........................................................................................................................................21
10 Order Management System ...................................................................................................................................23
11 export import configuration ...................................................................................................................................28
12 languages ................................................................................................................................................................30
13 improvement items ................................................................................................................................................31
14 Borders and templates ...........................................................................................................................................34
15 Printers configuration support ...............................................................................................................................37
Photo Editing Software of SL-620: User Manual v2.0
2
USER MANUEL: SL+ V2.0
31 octobre 2016
1 LICENSE AGREEMENTS, TERMS & CONDITIONS
Please refer the original user manual of Snap Lab Plus v1.8 for the following items:








DS-Tmini Software Licensing Agreement
Ownership Retained By Licensor
Disclaimer of Warranties
Limitation of Liability
Governing Law
Terms & Conditions
Acknowledgments
ICC Profiles
Photo Editing Software of SL-620: User Manual v2.0
3
USER MANUEL: SL+ V2.0
31 octobre 2016
2.0 INTRODUCTION
Photo Editing Software is a software system to make Prints, Calendars, Prints with Frames of various
sizes and Passport photos. This PES version 1.4.31.7 provides the following new features:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Automatic firmware upgrade for DS 620 & DS 820 printer
Panoramic Prints Product for DS 620 (6x14, 6x20) and DS 820 (8x18, 8x22, 8x26, 8x32) printers
Simplex 13 Pages, Yearly Calendar (4x8, 6x8 & 8x12)
New print finishing surface for DS 620/820 printers
a. Luster (available for both DS 620/820)
b. Fine matt (only for DS 820)
DS 820 printer support
a. DS 820 standard and High-Quality media support
RX1 HS support
Order release management system
New photo filters
a. Cartoon, Retro, Illustration, Sepia, Monochrome, Cool Mono-chrome, Tilt Shift, Soft
filter, Cross filter
Export / Import configuration
Panoramic printer support
Additional languages
New themes for various print products
Other improvement items
Support:
Any assistance regarding software upgrade, please contact our support team at:
Support@dnpphoto.eu
Photo Editing Software of SL-620: User Manual v2.0
4
USER MANUEL: SL+ V2.0
31 octobre 2016
3.0 FIRMWARE UPGRADE
From the PES (photo Editing Software) version 1.4.31.7, the firmware upgrade for DNP Printers made it
easy; i.e. the software will flash the firmware automatically when a DNP printer is connected with the
system (DST-Mini Hardware).
Firmware Upgrade Process - Automatic:
Let us consider that the new software is properly installed in the system and the system has been
restarted successfully.
 The system will detect the connected the DS 620 printer to check the firmware version
a. If the firmware version is less than v1.41 on DS 620, then update process will start
automatically
 Please wait until the below process have been completed:
Note: The printer produces multiple beeps & flashing LEDS. At the end of the successful firmware upgrade, the printer will put back to
green color LED
 Finally the system will display the screen saver of the software
Attention :
1. Please do not turn of the printer while the software is flashing the firmware.
2. The firmware update is for DS 620 and DS 820 only; not for any other DNP DS
Printers.
3. The software won’t upgrade firmware on multiple printers (DS 620 / DS 820)
at the same time; always one printer at a time.
4. For DS 620 v: 01.41; DS 820 v: 01.05 is the correct version for this software
release
Photo Editing Software of SL-620: User Manual v2.0
5
USER MANUEL: SL+ V2.0

31 octobre 2016
To confirm the printer firmware upgrade: Settings/Diagnostics/Printer Status:
Firmware Upgrade Process - Manual:
The PES allows manual firmware upgrade for DNP DS Printers, Settings/Diagnostics/update firmware/:




Please make sure the DNP Printer (DS 620 or DS 820) is connected & turned ON
Click on the button “Update firmware”
Please click on “Ok” of the confirmation message
Wait for the software finishes the firmware upgrade process
Attention :
1. Please do not turn of the printer while the software is flashing the firmware.
2. The firmware update is for DS 620 and DS 820 only; not for any other DNP DS
Printers.
3. The software won’t upgrade firmware on multiple printers (DS 620 / DS 820)
at the same time; always one printer at a time.
4. For DS 620 v: 01.41; DS 820 v: 01.05 is the correct version for this software
release
Photo Editing Software of SL-620: User Manual v2.0
6
USER MANUEL: SL+ V2.0
31 octobre 2016
4.0 PRINT FINISHING SURFACES
The Photo Editing software along with DNP DS 620 & DS 820 printer technology, introduces the new
type of photo finishes:
 Luster : Available on both DS 620 & DS 820 printers
 Fine Matte: only with DS 820 printer
Attention:
The software enables the photo finishes automatically for connected
printer(s)
If any settings have been configured/changed by the operatory then the
software won’t propose default photo finishes
 DS 620 Printer the software proposes the following photo finishes:
 DS 820 Printer the software proposes the following photo finishes:
Note:
Fine Matte & Luster print finishes only for DS 820 & DS 620 (only Luster for
the moment), not for any other DNP DS printer(s)
The photo finishes are common to any photo products as per the printer
620/820
If DS40/DS80/RX1/RX1-HS/DS80 DX is connected then Luster & Fine Matte
are not applicable
Fine Matte, print finish will be available for DS 620 printer in the next software update, please
check for future updates of the ‘Photo Editing Software’ or check DNP PIE website for more
information.
Photo Editing Software of SL-620: User Manual v2.0
7
USER MANUEL: SL+ V2.0
31 octobre 2016
5.0 PANORAMIC PRINTS PRODUCT
Panoramic prints are great for displaying landscape, wildlife, nature and cityscape photographs. Printing
panorama portraits on DNP Dye-Sub technology is an artistic and contemporary representation of your
digital photos.
To create impressive panoramic prints using your own digital photos with the SL+, Photo Editing
Software some photos are just too great not to be enlarged and printed to a size that is really
breathtaking to give a real sense of how great the photo really is. Whether it is an amazing landscape, a
picture perfect family photo or just something that takes your eye, you can enlarge your photo and we
can print it!


Note:


Panoramic are available only with DNP DS 620 & DS 820 printers
Panoramic prints uses the standard media for both DS 620 & DS 820
printers i.e. no special media/paper required
Panoramic print products are enabled automatically by detecting DS 620 &
DS 820 printer(s)
Panoramic print sizes can be verified at, Go to,
Admins/Settings/Products/products/Prints/…
Photo Editing Software of SL-620: User Manual v2.0
8
USER MANUEL: SL+ V2.0
31 octobre 2016
Panoramic Print Sizes: The PES provides the following print sizes for the panoramic product,
Print Products : Panoramic
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Attention:

Media/Panel usage
6x14
6x20
8x18
8x26
8x22
8x32
DS 620 w 6x8 & 6x9 Media
DS 620 w 6x8 & 6x9 Media
DS 820 w 8x10 & 812 media
DS 820 w 8x10 & 812 media
DS 820 w 8x12 media only
DS 820 w 8x12 media only
2 panels of 6x8/6x9
3 panels of 6x8/6x9
2 panels of 8x10/8x12
3 panels of 8x10/8x12
2 panels of 8x12
3 panels of 8x12
No other sizes/formats are possible with Panoramic print product
Panoramic Print workflow: This is the Workflow of creating and printing calendar products.
1) Select “Panoramic Prints” to make a panoramic print
Photo Editing Software of SL-620: User Manual v2.0
9
USER MANUEL: SL+ V2.0
31 octobre 2016
2) Select media where images are located, as an example a USB drive with images
3) Select a print size
4) Select photo finish type

Note:

If DS 820 printer is connected, then the software enabled the sizes for 820
printer & its media type automatically
If both DS 620 & DS 820, then the software will enable the possible print
sizes automatically of the printer(s) media type.
Photo Editing Software of SL-620: User Manual v2.0
10
USER MANUEL: SL+ V2.0
31 octobre 2016
5) Select an image
6) Edit the image if necessary, click on the ‘Edit’ button to perform it
7) Finish the edit and press next
Photo Editing Software of SL-620: User Manual v2.0
11
USER MANUEL: SL+ V2.0
31 octobre 2016
8) Order Summary
9) Insert Customer name
10) Press “next” to finish the order and start printing
Photo Editing Software of SL-620: User Manual v2.0
12
USER MANUEL: SL+ V2.0
31 octobre 2016
Panoramic Printer:
When two printers of DS 620 or DS 820 are connected with DS-Tmini system, the PES provides
the possibility to assign a “Panoramic Printer” where panoramic prints printed on the assigned printer.

How to assign a “Pano Printer”?
o Ensure that the system has been connected with two printers of DS 620 or DS 820
 The printers must be turned ON
o Go to Admins, Settings/Products/Printer Parameters/
o In the “Output Profile” dialog, scroll down till “Print panorama prints on these printers”
o Select a printer to print panoramic prints when an order contains “Panoramic product”
 If an order contains no “Panoramic product” then an order will be printed on
both the printer(s) of the media type
Screen-Shots:
Photo Editing Software of SL-620: User Manual v2.0
13
USER MANUEL: SL+ V2.0


Attention:


31 octobre 2016
Only one Panoramic printer can be assigned for DS 620 or DS 820
The software display the panoramic printer serial-number & its media type
for selection purpose
The software will display a warning message when insufficient number of
panels for Panoramic print(s)
Panoramic prints are printed with assigned printer else the order will be
printed on both the printers (as per the product & media type of the
printer)
Photo Editing Software of SL-620: User Manual v2.0
14
USER MANUEL: SL+ V2.0
31 octobre 2016
6.0 CALENDARS (13 PAGES SIMPLEX)
The Photo Editing Software, SL+ introduces new sub-product “13 Pages Simplex Yearly Calendar” part of
Calendar product that can be printed with DS 620, DS 820 printer.
 Sizes: 4x8, 6x8, 8x12
Panoramic Print workflow: This is the Workflow of creating and printing 13 Pages Simplex Yearly
Calendar products.
1) Select Calendars to make a 13 Pages Simplex Yearly Calendar product
2) Select media where images are located, as an example USB portable device
Photo Editing Software of SL-620: User Manual v2.0
15
USER MANUEL: SL+ V2.0
31 octobre 2016
3) Select print size, 6x8 (13 Pages)
4) Select paper finish
5) Select images
Photo Editing Software of SL-620: User Manual v2.0
16
USER MANUEL: SL+ V2.0
31 octobre 2016
6) Select a background theme
7) Change image sequence if necessary
8) Select Calendar options: language, country (for national festivities) and starting month
Photo Editing Software of SL-620: User Manual v2.0
17
USER MANUEL: SL+ V2.0
31 octobre 2016
9) Page preview and edit
Note:

For more information on editing, please refer the previous user manual v1.8
10) Order Summary
Photo Editing Software of SL-620: User Manual v2.0
18
USER MANUEL: SL+ V2.0
31 octobre 2016
11) Insert Customer name
12) Press “next” to finish the order
Photo Editing Software of SL-620: User Manual v2.0
19
USER MANUEL: SL+ V2.0
31 octobre 2016
7 PHOTO FILTERS
The photo editing software has been improvised to provide a quality filters to meet the market
demands. The following filters have been added in the software:
1. Monochrome 2. Retro 3. Sepia 4. Tilt-Shift 5. Soft-Filter 6. Original 7. Cool-Monochrome
8. Cross-Filter 9. Illustration 10. Mirror
To access filters, click on “Edit” button of any product workflow in the order making process.
Attention:
The filter results on the image quality varies upon the original image
Some of the earliest filters have been removed in this version; the software
provides commonly used filters of photo technology
Photo Editing Software of SL-620: User Manual v2.0
20
USER MANUEL: SL+ V2.0
31 octobre 2016
8 DS 820 PRINTER SUPPORT
DS 820
DNP is pleased to introduce brand new 8” inch printer with various features.
Some Key Features:





More print formats/sizes
New photo finishes: Luster, Fine Matte along with Glossy & Matte
Rewinding function
Standby mode for less power consumption
Supports standard digital media & High Quality media
Attention:



DS 820 printer detects both Standard & High Quality media
Please refer “Product Matrix” for supported products/print sizes for DS 820
For more details on the DS820 printer, please refer to our website:
http://www.dnpphoto.eu/en/products/photo-printers/ds820
8.1 DS 820 HIGH QUALITY MEDIA SUPORT



DS 820 brings the high definition printing using High Quality media.
The operator can activate the ‘High Definition’ mode for HQ media.
o Go to, Admin, Settings/products/printer parameters/High Density print on supported
printers/
 ON/OFF (default value : NO)
The HD mode works on both 300x300 dpi & 300x600 dpi (recommend using 300x600 dpi)
o Go to, Admin, Settings/products/printer parameters/Resolution/
 ON/OFF (default value : 300X300 dpi)
Note:


The software detects HQ media and activated HD mode automatically
Do not change the media type from Standard to HQ or vice versa in the
middle of a print job, in case of a media over
9.0 RX1 HS PRINTER SUPPORT
Photo Editing Software of SL-620: User Manual v2.0
21
USER MANUEL: SL+ V2.0
31 octobre 2016
The Photo Editing Software supports new “RX1 HS” printer (HS: High Speed 20% faster than RX1):
RX1 HS

Attention:



RX1 HS printer detects only HS media, where RX1 printer detects both
standard & HS media.
Please refer “Product Matrix” for supported product/print sizes for RX1 HS
The products & print sizes are same for both RX1 & RX1 HS printer
For more details on the RX1 HS printer, please refer to our website:
http://www.dnpphoto.eu/en/products/photo-printers/ds-rx1hs
Photo Editing Software of SL-620: User Manual v2.0
22
USER MANUEL: SL+ V2.0
31 octobre 2016
10 ORDER MANAGEMENT SYSTEM
The PES introduces the new feature for operator(s) who would like to manage several photo orders.
By enabling this feature, the software system stacks multiple orders, allows the operator to decide a
particular order can be processed with order details of a printing progress screen.
How to enable “Order Management System”?
 Go to Admin Settings/General/process confirmation
 Select the option “Release by Operator / manually” and click on “Ok”
 Assign a new password
o The default password is: “0000”, if no new password given then the, default password
will be used.
o In this example: the given password is “4004” and click on “Ok” button
 Custom text: Please enter a custom text that will be displayed at the end of an each order
o Default text: The system keeps “setup” as a default text
o In this example: The given custom text is “Please contact the operator to release your
order” and click on “Ok” button
Photo Editing Software of SL-620: User Manual v2.0
23
USER MANUEL: SL+ V2.0
31 octobre 2016
How to release an order by the option “Release by operator / manually”?
1. Let’s imagine an order with “Print” products is in the process and the name is given as “Test”
2. At the end of a successful order, the system will display a message “Please contact the operator
to release your order”
a. If receipt is configured then system will release a receipt
b. To configure receipt, please refer the “User Manual v1.8”
3. After a few seconds, the system will display the systems’ screen-saver
4. The operator needs to tap the screen on top left and right side in a sequential order
5. The operator must punch the configured password “4004” and click on “Ok” button
o If the password is wrong then the system will go back to default screen
o The operator has to follow the step 4 again….
6. The operator must select the order from the list of orders and click on “Process” button
a. Only one order can be released at a time
7. The operator must click on “Ok” to confirm the order release process
8. The software will display a “Please wait” message
9. The software will display a “Printing Progress” screen
a. During the printing process, the system allows only “Cancel” option to terminate the
order.
b. The “Cancel” button helps the operator to terminate the wrong order from printing
Attention:
If a print job is already sent to the printer, then it can’t be cancelled but the rest of
the prints from the same order will be terminated.
Screen-Shots:
Photo Editing Software of SL-620: User Manual v2.0
24
USER MANUEL: SL+ V2.0
31 octobre 2016
Tap on the left & right
side
Enter Password : 4004
Software displays the
order(s) list
Photo Editing Software of SL-620: User Manual v2.0
25
USER MANUEL: SL+ V2.0
31 octobre 2016
Select the order
« Test »
Click on ‘ Process ‘
button
Click on ‘Ok’ to
confirm the order
Please wait…..
Photo Editing Software of SL-620: User Manual v2.0
26
USER MANUEL: SL+ V2.0
31 octobre 2016
Printing Progress
Screen
Cancel button to
‘Terminate’ the order
Software displays the
order(s) list
Screen Saver after
successful printing of
an order
Photo Editing Software of SL-620: User Manual v2.0
27
USER MANUEL: SL+ V2.0
31 octobre 2016
11 EXPORT IMPORT CONFIGURATION
The PES provides an easy function to apply multiple systems of the same configuration i.e. allows the
operator to configure one system and apply the same configuration on multiple DS-Tmini systems.
Export Configuration:
 Go to Admin Settings/General/System/Export or Import:
 Click on “Export” button
o Please wait until the system proposes the location to “Save As”
 Select the location to save
 Please wait until the system finishes the process:
o The system will prompt a “Please wait” message until the end process
 The system will put back to the system Admin Settings/General/ screen
1
Note:
2
3
This process applicable only with DS-Tmini system
This process takes the entire software configuration of the system
The export process may take about 5 to 10 minutes
If the “Save As” location is on a portable USB/SD card for ex, then process
may take longer because of the performance of the input source
If more contents like Frames/Templates have been added then system make
take more time to finish the process
Photo Editing Software of SL-620: User Manual v2.0
28
USER MANUEL: SL+ V2.0
31 octobre 2016
Import Configuration: To apply the above configuration to another DS-Tmini system, please see below
instructions:
 Go to Admin Settings/General/System/Export or Import:
 Click on “Import” button
o Please wait until the system proposes the dialog to “Open”
o Please locate the saved file: for ex, “Backup_2016_10_20.zip”
o The saved configuration from export process was saved in Zip format as backup
followed by date of the day.
 Select the file (.zip) to import the configuration
 Please wait until the system finishes the process:
o The system will prompt a “Please wait” message until the end process
 The system will put back to the system Admin Settings/General/ screen
1
Note:
2
3
This process applicable only with DS-Tmini system
This process will apply exact configuration from the backup.zip file
The process can’t be reversed once the system applies the settings from the
“Backup.zip” file
The import process may take about 5 to 10 minutes
If the “Open” location is on a portable USB/SD card for ex, then process may
take longer because of the performance of the input source
 The import & export configuration applied on any number of DS-Tmini system(s)
 This function export import doesn’t apply for ‘Biometric’ license i.e. ‘Biometric’ is not portable
from one system to another using this function.
Photo Editing Software of SL-620: User Manual v2.0
29
USER MANUEL: SL+ V2.0
31 octobre 2016
12 LANGUAGES
The new version of the software has been updated with the following new languages:
1.
2.
3.
4.
5.
English US
English Canada, French Canada
Spanish Argentina
Spanish Colombia
Catalan Spain
The total numbers of available languages with SL+ SW are: 24 languages
Available Languages
Catalan Spain
Italian
Czech
Japanese
English Canada
English UK
Norwegian
Polish
English US
Portuguese
Dutch Netherlands
Romanian
Finnish
Russian
French France
Spanish Spain
French Canada
Spanish Argentina
German
Spanish Colombia
Greek
Swedish
Hungarian
Ukrainian
Photo Editing Software of SL-620: User Manual v2.0
30
USER MANUEL: SL+ V2.0
31 octobre 2016
13 IMPROVEMENT ITEMS
The SL+ software brings number of improvements apart from the new functions. Let’s see the below list
of improvement items:
1. Terms & conditions can be turned ON/OF
a. Admin: Settings/General/Initial Parameters/Display Terms & Agreements: ON/OFF
2. Photo Sources: The photo sources like Memory Card, USB, iPhone/iPad, Android, Windows
Phone, PhotoPrints; Wi-Fi Application and Social Network are can be turned ON/OFF
a. Admin: Settings/General/Photo Sources/..
3. Biometric Photo product (Optional License is required) : Product name & date are printed on
the final output
Photo Editing Software of SL-620: User Manual v2.0
31
USER MANUEL: SL+ V2.0
31 octobre 2016
4. Passport product creation in inches or in centimeters:
a. New “Passport Product” creation displays the metric sizes as per the initial system
metrics i.e. Settings/Initial Parameters/System of Units/centimeters or Inches:
5. DNP Printer(s) firmware version: Settings/Diagnostics/Printer status/
6. TeamViewer DNP version
a. When the DS-Tmini SL+ system requires remote support, the system must be connected
with internet connection & provide the “Team Viewer ID” to the support in-charge.
b. Password: dnppiesupport (in small letters with no space)
c. To access “Team Viewer”: Settings/Diagnostics/teamviewer
i. Please click at once & wait until the system will display the TeamViewer screen:
Photo Editing Software of SL-620: User Manual v2.0
32
USER MANUEL: SL+ V2.0
31 octobre 2016
7. New themes for Calendar/Greeting Card/Photobook products
8. New Frames for square size under “Prints with Frames’ product of 4x4, 5x5, 6x6 & 8x8
Photo Editing Software of SL-620: User Manual v2.0
33
USER MANUEL: SL+ V2.0
31 octobre 2016
14 BORDERS AND TEMPLATES
The photo editing software provided with number of borders and templates for various print sizes by
default. And also the software’s accepts to use the borders/templates created by a third party but the
border should meet the below condition:
Border / Frame Instructions:

Defining the border: image format type .PNG
A) Define the overall border image size
 <width>###</width>
 <height>###</height>
 Example of 6x4 @ 300 dpi:
 <width>1800</width><height>1200</height>
B) Define top-left corner of alpha channel
 <alpha x=“###” y=“###” width=“xxx” height=“xxx” rotation=“xx” />
 This is where the image in the border starts, its top-left pixel location
C) Define the width & height of the alpha channel
 <alpha x=“xxx” y=“xxx” width=“###” height=“###” rotation=“xx” />
 This is how wide and tall you want your image in the border to be
D) Define rotation of the alpha channel
 <alpha x=“xxx” y=“xxx” width=“xxx” height=“xxx” rotation=“###” /
 Rotation measured in degrees
 A value of 15 will rotate the image within the border 15 degrees

Aspect ratio per print size:
ASPECT RATIO
1:1
Multiply Short Side
by:
Image size in inches:
Image size in
centimeters
6:5
1
1.2
5:4
1.25
7:5
1.27
1.3
1.4
4:3
1.43 1.33
3:2
1.5
5x5
6x6
8x8
8x10
5x7
3.5x5
6x8
4x6
6x9
8x12
13x13
15x15
20x20
20x25
13x18
9x13
15x20
10x15
15x23
20x30
Photo Editing Software of SL-620: User Manual v2.0
2:1
2
34
USER MANUEL: SL+ V2.0

31 octobre 2016
Example layout design for 4x6” / 10x15cm size:
Remarks:
1. The photo editing software admin, doesn’t allow editing the existing
templates.
2. The frame/border must be created with third party software, for ex: Adobe
Photoshop.
3. The software allows to import the designed borders/frames as an individual
files or from a folder.
 To import the designed/created frame/borders, Go to Settings/General/products/Frame/
o For more details, please refer the previous user manual v1.8
Photo Editing Software of SL-620: User Manual v2.0
35
USER MANUEL: SL+ V2.0
31 octobre 2016
Templates Design Instructions:

Defining the Template: image format type .JPG
A) Define the overall template image size with the desired design
 <width>###</width>
 <height>###</height>
 Example of 8x12 @ 300 dpi:
 <width>2400</width><height>3600</height>
B) Save the template in .jpg format

Applying the template in the photo editing software:
A) To import the designed/created frame/borders, Go To:
 Settings/General/products/Template/
 For more details, please refer the previous user manual v1.8

Example of template layout design for 8x12” / 20x30cm size:
Photo Editing Software of SL-620: User Manual v2.0
36
USER MANUEL: SL+ V2.0
31 octobre 2016
15 PRINTERS CONFIGURATION SUPPORT
For better usage & performance of the system, we recommend using any one of the following
configurations:
Configuration Type 1
Configuration Type 3
DS 620
DS 620 with DS 820
Configuration Type 2
DS 620 with DS 80 DX
Configuration Type 4
DS 620 with DS 80
Configuration Type 6
Configuration Type 7
DS 620 with RX1 or
RX1HS
DS 620 with DS40
Configuration Type 5
2 DS 620, 1 DS 820 or DS 80
Caution: Trying different configurations apart from the above are not supported by DNP
1. Please do not use same media type, For ex: 6x8 media on both DS 620 / DS 40
2. Please do not connect two different printers of the same media type DS 820 & DS 80
3. Please do not connect DS 80 DX along with DS 80, instead of DS 80 please use DS 820 for
better performance & various print sizes.
4. Please do not connect printer DS 620 w 6x8 media and printer RX1 / RX1 HS with 6x8
media.
Note:
For product matrix & supported media type per printer; verify the below table.
For more information please contact our support team at: Support@dnpphoto.eu
Photo Editing Software of SL-620: User Manual v2.0
37
USER MANUEL: SL+ V2.0
31 octobre 2016
SL+ Product Matrix in Centimeter:
Product
Print Products: Simplex
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Size
9 x 13
10 x 10 (Trim)
10 x 15
(10 x 15)2
(11 x 15)2
13 x 13
13 x 18
15 x 15
15 x 20
15 x 23
20 x 20
20 x 25
20 x 30
Print Products : Panoramic
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
15x35
15x50
20x45
20x65
20x55
20x80
Printer W Media
DS 620 / RX1
DS 620 / RX1
DS 620 / RX1
DS 620 / RX1 w 15x20 Media
DS 620 w 6x9 Media
DS 620 /RX1
DS 620 /RX1/DS 820*
DS 620 /RX1
DS 620 /RX1/ DS 820
DS 620 / DS 820*
DS80 / DS 80 DX / DS 820
DS80 / DS 80 DX / DS 820
DS80 / DS 80 DX / DS 820
DS 620 w 15x20 Media
DS 620 w 15x20 Media
DS 820 w 20x25
DS 820 w 20x25
DS 820 w 20x30
DS 820 w 20x30
Print Products : Frames / Borders
Simple Prints with Frame
9 x 13
Simple Prints with Frame 10 x 10 (Trim)
Simple Prints with Frame
10 x 15
Simple Prints with Frame
13 x 13
Simple Prints with Frame
13 x 18
Simple Prints with Frame
15 x 15
Simple Prints with Frame
15 x 20
Simple Prints with Frame
15 x 23
Simple Prints with Frame
20 x 20
Simple Prints with Frame
20 x 25
Simple Prints with Frame
20 x 30
DS 620 / RX1
DS 620 / RX1
DS 620 / RX1
DS 620
DS 620 / RX1
DS 620 /RX1/ DS 820
DS 620 /RX1/ DS 820
DS 620 w 15x23 Media
DS80 / DS 80 DX / DS 820
DS80 / DS 80 DX / DS 820
DS80 / DS 80 DX / DS 820
Print Products : Greeting Cards
Greeting Card Simplex
Greeting Card Simplex
Greeting Card Double Side
Greeting Card Double Side
DS80 / DS 80 DX / DS 820
DS80 / DS 80 DX / DS 820
DS80 DX
DS80 DX
Printer with supported Media
DS 620
DS 820
RX1 HS
10 x 20
15 x 20
10 x 20
15 x 20
10x15, 13 x 18
15 x 20
15 x 23
20 x 25(Standard, Premium)
20 x 30(Standard, Premium)
9x13
10x15
13x18
15x20
Size
Printer W Media
Print Products : Calendars
Calendar 1 Page Simplex
Calendar 2 Pages Duplex
Calendar 13 Pages Duplex
Calendar 13 Pages Simplex
Calendar 1 Page Simplex
Calendar 2 Pages Duplex
Calendar 13 Pages Duplex
Calendar 13 Pages Simplex
Calendar Single Page
Calendar 13 Pages Simplex
Calendar 13 Pages Simplex
Calendar Single Page
Calendar Single Page
Product
20 x 25
20 x 25
20 x 25
20 x 25
20 x 30
20 x 30
20 x 30
20 x 30
15 x 20
15 x 20
10x20
13 x 18
15 x 20
DS80 DX / DS 80 / DS 820
DS80 DX
DS80 DX
DS80 DX / DS 80 / DS 820
DS80 DX / DS 80 / DS 820
DS80 DX
DS80 DX
DS80 DX / DS 80 / DS 820
DS 620 /RX1/ DS 820
DS 820 / DS 620
DS 80 / DS 820
DS 620 /RX1/ DS 820*
DS 620 /RX1/ DS 820
Print Products: Double Sided
Double Sided Prints
Double Sided Prints
Double Sided Prints
Double Sided Prints
Double Sided Prints
10 x 20
15 x 20
20 x 20
20 x 25
20 x 30
DS80 DX
DS80 DX
DS80 DX
DS80 DX
DS80 DX
Print Products : PhotoBooks
Photo Book
Photo Book H/V
Photo Book H/V
Photo Book H/V
Photo Book
Photo Book H/V
Photo Book H/V
10 x 10
10 x 15
10 x 20
15 x 20
20 x 20
20 x 25
20 x 30
DS80 DX (White Trim)
DS80 DX (White Trim)
DS80 DX (White Trim)
DS80 DX
DS80 DX
DS80 DX
DS80 DX
Print Products : ID Photo / Passport
ID Photo
10 x 15 DS 620 / RX1
* : White space on the right side of the print
Printer with supported Media
9x13
10x15
RX1
13x18
15x20
20 x 25
DS 80
20 x 30
20 x 25 Duplex Media
DS 80 DX
20 x 30 Duplex Media
Note: 15x23 simplex calendar with 15x23 media only
Caution: Please do not mix DS 820 media with DS 80 vice versa; RX1 HS printer detects HS media only where RX1 can detect both HS/Standard
Photo Editing Software of SL-620: User Manual v2.0
38
USER MANUEL: SL+ V2.0
31 octobre 2016
SL+ Product Matrix in Inches:
Product
Print Products: Simplex
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Simple Prints
Print Products : Panoramic
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Panoramic Prints
Size
Printer W Media
3.5 x 5 DS 620 / RX1
4 x 4 (Trim) DS 620 / RX1
4x 6
DS 620 / RX1
(4 x 6)2 DS 620 / RX1 w 6x8 Media
(4.5 x 6)2 DS 620 w 6x9 Media
5x 5
DS 620 /RX1
5x 7
DS 620 /RX1
6x 6
DS 620 /RX1
6x 8
DS 620 / DS 820*
6x 9
DS 620 / DS 820*
8x 8
DS80 / DS 80 DX / DS 820
8 x 10 DS80 / DS 80 DX / DS 820
8 x 12 DS80 / DS 80 DX / DS 820
Product
Size
Print Products : Calendars
Calendar 1 Page Simplex
Calendar 2 Pages Duplex
Calendar 13 Pages Duplex
Calendar 13 Pages Simplex
Calendar 1 Page Simplex
Calendar 2 Pages Duplex
Calendar 13 Pages Duplex
Calendar 13 Pages Simplex
Calendar Single Page
Calendar 13 Pages Simplex
Calendar 13 Pages Simplex
Calendar Single Page
Calendar Single Page
8x10
8x10
8x10
8x10
8x12
8x12
8x12
8x12
6x8
6x8
4x8
5x7
4x6
Printer W Media
DS80 DX / DS 80 / DS 820
DS80 DX
DS80 DX
DS80 DX / DS 80 / DS 820
DS80 DX / DS 80 / DS 820
DS80 DX
DS80 DX
DS80 DX / DS 80 / DS 820
DS 620 /RX1/ DS 820
DS 820 / DS 620
DS 80 / DS 820
DS 620 /RX1/ DS 820*
DS 620 /RX1/ DS 820
Print Products: Double Sided
Double Sided Prints
4x 8
Double Sided Prints
6x 8
Double Sided Prints
8x 8
Double Sided Prints
8 x 10
Double Sided Prints
8 x 12
DS80 DX
DS80 DX
DS80 DX
DS80 DX
DS80 DX
Print Products : PhotoBooks
Photo Book
4x4
DS80 DX (White Trim)
Simple Prints with Frame 4 x 4 (Trim) DS 620
Simple Prints with Frame
4x 6
DS 620 / RX1
Simple Prints with Frame
5x 5
DS 620
DS 620 / RX1
Simple Prints with Frame
5x 7
DS 620 / RX1
Simple Prints with Frame
6x 6
Simple Prints with Frame
6x 8
DS 620 / RX1
Simple Prints with Frame
6x 9
DS 620
Simple Prints with Frame
8x 8
DS80 / DS 80 DX
Simple Prints with Frame
8 x 10 DS80 / DS 80 DX
Simple Prints with Frame
8 x 12 DS80 / DS 80 DX
Photo Book H/V
4x 6
DS80 DX (White Trim)
Photo Book H/V
Photo Book H/V
Photo Book
Photo Book H/V
Photo Book
4x 8
8x 6
8x 8
8 x 10
8 x 12
DS80 DX (White Trim)
Print Products : Greeting Cards
Greeting Card Simplex
4x8
Greeting Card Simplex
4x8
Print Products : ID Photo / Passport
ID Photo
4x6
6x14
6x20
8x18
8x26
8x22
8x32
Print Products : Frames / Borders
Simple Prints with Frame
3.5 x 5
Greeting Card Double Side
6x8
Greeting Card Double Side
6x8
DS 620 w 6x8 Media
DS 620 w 6x8 Media
DS 820 w 8x10
DS 820 w 8x10
DS 820 w 8x12
DS 820 w 8x12
DS 620 / RX1
DS80 / DS 80 DX / DS 820
DS80 / DS 80 DX / DS 820
DS80 DX
DS80 DX
Printer with supported Media
4x6, 5x7
DS 620
6x8
6x9
8x10 (Standard, Premium)
DS 820
8x12 (Standard, Premium)
3.5x5
4x6
RX1 HS
5x7
6x8
DS80 DX
DS80 DX
DS80 DX
DS80 DX
DS 620 / RX1
* : White space on the right side of the print
RX1
DS 80
DS 80 DX
Printer with supported Media
3.5x5
4x6
5x7
6x8
8x10
8x12
8x10 Duplex Media
8x12 Duplex Media
Note: 6x9 simplex calendar with 6x9 media only
Caution: Please do not mix DS 820 media with DS 80 vice versa; RX1 HS printer detects HS media only where RX1 can detect both HS/Standard
Photo Editing Software of SL-620: User Manual v2.0
39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising