vt/vr14100 series
VT/VR14100 SERIES
PRODUCT SPECIFICATION
10 BIT DIGITALLY ENCODED VIDEO TRANSMITTER AND RECEIVER
FEATURES
• State-of-the-Art 10-Bit Digitally Encoded Video Transmission
• Exceeds All Requirements for RS-250C Short-Haul
Transmission: True Broadcast Video Performance
V
• Exceptionally Low Video Distortion with Zero
Performance Variation vs. Optical Path Loss
• Ideally Suited to Networks Requiring Multiple
Physical Layers Where Video Degradation May Be a Problem
• Directly Compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems
DESCRIPTION
The IFS VT/VR14100 series video transmitter and video receiver
units utilize state-of-the-art 10-bit digital encoding and decoding for
true broadcast-quality video transmission that exceeds the
requirements of EIA RS-250C for Short-Haul Video Transmission.
These environmentally hardened units provide transmission of video
over one singlemode or multimode fiber optic cable and are ideal for
use in unconditioned road side or out-of-plant installations. As the
level of video performance is so high, the VT/VR14100-series is ideally suited to networks employing multiple physical layers where
video degradation may be problem, such as FDM or digitally encoded
video multiplexing links, T-1 or fractional T-1 codecs, and SONET or
ATM backbones. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera
system. Plug-and-play design ensures ease of installation and no
electrical or optical adjustments are ever required. LED indicators are
provided for rapidly ascertaining equipment operating status, and
this equipment is available in either stand-alone or rack mount
configurations.
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Wide Optical Dynamic Range: Optical Attenuators are
Never Required
• Exceeds NEMA TS-1/TS-2 and Caltrans Traffic Signal
Control Equipment Environmental Specifications for
Operating Temperature, Shock, Vibration, Humidity,
and Voltage Transient Protection
• Robust Design Ensures Extremely High Reliability
In Unconditioned Roadside
Available at:
Environments
• Comprehensive Lifetime Warranty
www.
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
APPLICATION EXAMPLES
• High Performance CCTV (Fixed Video)
ORDERING INFORMATION
PART
NUMBER
DESCRIPTION
FIBERS
REQUIRED
OPTICAL
MAX.
PWR BUDGET DISTANCE*
MULTIMODE VT14120
62.5/125µm** VR14120
Video Transmitter/Stand-alone module (1310 nm)
Video Receiver/Stand-alone module (1310 nm)
1
10 dB
2 miles (3 km)
VT14130
VR14130
Video Transmitter/Stand-alone module (1310 nm)
Video Receiver/Stand-alone module (1310 nm)
1
23 dB
43 miles (69 km)
VT14150
VR14150
Video Transmitter/Stand-alone module (1550 nm)
Video Receiver/Stand-alone module (1550 nm)
1
27 dB
67miles (108 km)
SINGLEMODE
9/125µm
ACCESSORIES♦
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
OPTIONS
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-SC’ to Model Number for SC Optical Connector (For Single-mode Equipment Only)
Add -‘FC’ to Model Number for FC Optical Connector (Single-mode equipment only)
Add ‘-HP’ to VT Model Number for 26 dB Single-mode Optical Power Budget
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected] ■ For an office near you go to: www.ifs.com
With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America
43
VT/VR14100 SERIES
TECHNICAL SPECIFICATION
10 BIT DIGITALLY ENCODED VIDEO TRANSMITTER AND RECEIVER
SPECIFICATIONS
CONNECTORS
VIDEO
Power:
Video:
Optical:
Video Input:
Video Bandwidth:
Differential Gain:
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
<2%
<0.7°
<1%
>67 dB @ Maximum Optical Loss Budget
WAVELENGTH
1310 nm, Multimode
1550 nm, Singlemode
OPTICAL EMITTER
Laser Diode (all models)
NUMBER OF FIBERS
1
Terminal block with screw clamps
BNC (Gold Plated Center-Pin)
ST , SC or FC (see ordering information)
ELECTRICAL & MECHANICAL
Power:
Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount:
Rack Mount:
Shipping Weight:
+12 VDC @500 mA
From Rack
2
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
< 2 lbs./ 0.9 kg
ENVIRONMENTAL
LED INDICATORS
VT Transmitter Unit:
• Video Input Sync Presence
• Video Input Overload
• Operating Power
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
VR Receiver Unit:
• Video Output Sync Presence
• Video Output Overload
• Optical Carrier Detect/ Link-Lock
• Operating Power
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
RECEIVER
MODEL
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
VT14120
VR14120
10 dB
2 miles (3 km)
VT14130
VR14130
23 dB
43 miles (69 km)
VT14150
VR14150
27 dB
67 miles (108 km)
WAVELENGTH TRANSMITTER
MODEL
Multimode
62.5/125µm**
1310 nm
Singlemode
9/125µm
1550 nm
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
1 Fiber
9/125µm SM
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
44
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement