SM5-EA Audio Surveillance Kit
Sound Surveillance tm
SM5-EA
Audio Surveillance
Kit
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123
PH 505-888-3923 FAX 505-888-3926
Website: www.etsnm.com
Description
Single zone audio surveillance kit
for use with powered over Ethernet
I/P cameras. In line adaptor for
tapping power off Ethernet powered
I/P cameras to supply power to the
SM1 microphone. Adaptor
"breakout box" includes
terminations for the microphone.
Can be connected to “microphone”
or “line” level inputs of POE I/P
cameras. Supports both modes A and
B of IEEE802.3af. For use with ETS or
Louroe microphones only.
Kit Includes






SM1 Pre-amplified microphone. SMEA-1 interface 3’ RCA or 3.5mm Patch cable.
Warning label. SM1 mounting screws.
Installation instructions.
Options
SM1 Microphone Specifications
 Omni-directional Electret element.
25’ range in all directions.
 Frequency response: 200-16Khz.
 Low noise MOSFET pre-amplifier.
 Line level, unbalanced output.
 Adjustable gain.
 Treble boost circuit. Selectable on/off.
 Limiter circuit. Selectable on/off.
 3 position Euro-style connector makes
cable termination fast and clean.
 Flush mountable. Can be mounted on a single
gang electrical box.
 Power: 12 VDC @ 10mA
 See SM1 data sheet for more information.
SPECIFY: RCA output connector OR
3.5mm when ordering.
SMEA-1 Interface Specifications
Microphone Wiring Requirements
 Stranded 22-gauge, 2-conductor
shielded cable with drain wire.
Max. cable length: 1500’.







Caution
It is the responsibility of the installation company and end
user to comply with state and federal privacy laws regarding the use of audio surveillance equipment. If you are
unfamiliar with these laws, consult a qualified attorney. In
most cases, posting the provided warning label in plain
view is all that is required.
Warranty
1 year parts and labor.





RCA or 3.5mm audio output jack.
Transformer isolated audio output.
Adjustable audio output level.
RJ45 CAT5 in/out jacks.
Modes A and B of IEE802.3af supported.
A/B mode switch selectable.
Straight through CAT5 connections
(no crossover)
Voltage input: 48-60Vdc
15vdc internal Voltage regulator supplies
power to microphone. Current consumption:
15ma with microphone connected.
Euro-style connector makes cable
termination of microphone fast and clean.
Led power indicator
Auto polarity protected & fused.
Dimensions: L 3.3 x W 2.0 x H 1.6
Made in from
U.S.A.
Available
A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising