Vacuum pumps
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
NEW!
Aluminium diaphragm pumps
Diaphragm pumps made with Aluminium and FPM as the wetted materials are the optimal selection for non-corrosive
VACUUBRAND
applications such as backing pumps for rotary and turbomolecular pumps, for regenerating cryopumps, for evacuating or
transferring gases and for analysis equipment. Vacuum filtration is one of the most common applications used for sample preparation in chemistry,
microbiology, waste water control and other analytical processes. The new ME 1 and ME 1 C diaphragm pumps offer a compact, high perfomance and easy to
use solution which is perfect for both single and multiple filtrations.
Type
Connector
ME 1
ME 1
ME 1
ME 2
ME 16
MD 1
MD 12
MV 10
CEE
CH
UK
CEE
CEE
CEE
CEE
CEE
Number
of steps
Flow
rate
(50/60 Hz)
m³ / hr.
0.7 / 0.85
0.7 / 0.85
0.7 / 0.85
1.9 / 2.2
12.0 / 12.9
1.2 / 1.4
9.6 / 10.4
8.1 / 8.8
1
1
1
1
1
3
3
4
Ultimate
pressure
mbar
100
100
100
< 80
< 80
1,5
2
0,6
Weight Dimensions
(W x D x H)
kg
5.0
5.0
5.0
6.8
24.0
6.7
24.0
24.0
PK Cat. No.
mm
247 x 121 x 145
247 x 121 x 145
247 x 121 x 145
258 x 164 x 188
470 x 227 x 294
303 x 143 x 215
486 x 227 x 294
486 x 227 x 294
1
1
1
1
1
1
1
1
1
9.880 930
9.880 931
9.880 932
9.880 802
9.880 835
9.880 080
9.880 081
9.882 083
9.880 930
NEW!
Chemistry diaphragm pumps
Gases and vapours only come into contact with chemically-resistant, fluorine-derived plastics in chemical ("C") diaphragm
pumps. Does not require a cooling trap. Optional accessories or direct use of complete pumping units based on these pumps
enable almost 100% recovery of the solvents in use and protection of the atmosphere.
Connector
ME 1C
ME 1C
ME 1C
ME 2C
ME 16C
MD 1C
MD 12C
MV 10C
CEE
CH
UK
CEE
CEE
CEE
CEE
CEE
1
2
9.880 080
Type
2
Number
of steps
1
1
1
1
1
3
3
4
Flow
rate
(50/60 Hz)
m³ / hr.
0.7 / 0.85
0.7 / 0.85
0.7 / 0.85
1.9 / 2.0
10.1 / 11.6
1.3 / 1.5
8.3 / 8.9
7.0 / 7.5
Ultimate
pressure
mbar
100
100
100
< 80
< 80
2
2
0.9
Weight Dimensions
(W x D x H)
kg
5.0
5.0
5.0
7.1
25.0
6.7
25.0
25.0
VACUUBRAND
PK Cat. No.
mm
247 x 121 x 145
247 x 121 x 145
247 x 121 x 145
258 x 164 x 191
515 x 237 x 294
316 x 143 x 223
505 x 237 x 294
505 x 237 x 294
1
1
1
1
1
1
1
1
9.880 934
9.880 935
9.880 936
9.880 821
9.880 836
9.880 083
9.880 082
9.882 085
4
3
Diaphragm pumps ATEX-models available on request.
3
4
9.880 083
5
9.880 934
Vacuum regulator valves for ME 1 and ME 1C with manual vacuum control using air
bleed. The manometer can be mounted and pivoted in several orientations for optimal
visibility. High chemical compatibility (especially with the vacuum regulator valve for ME 1C)
Description
Vacuum tubing, rubber, DN 6
Vacuum tubing, rubber, DN 10
Vacuum regulator valves for ME 1*
Vacuum regulator valves for ME 1C*
*Supplied per metre
978
NEW!
5 Accessories for ME 1 and ME 1C
E & OE.
VACUUBRAND
PK
Cat. No.
1
1
1
1
9.881 930
9.881 932
9.880 938
9.880 939
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
1 Diaphragm pumps NT Series, Aluminium
1
Diaphragm pumps NT Series
VACUUBRAND
- improved performance, increased pumping speed (up to 8m³/h) and better ultimate vacuum extend applications with
non-aggressive gases whether used in the laboratory or for industrial processes
- very low leak rate due to enhanced leak-tight tubing connections, resulting in consistent performance characteristics even after many years operation. Ideal for analytical applications
- long diaphragm and valve lifetimes: made of highly flexible FPM, with fabric-reinforced double diaphragms for
improved long term stability
- whisper quiet and ultra low vibration due to compact drive with patented motor drive system. Ideal as a built-in
component for sensitive analytical equipment
- easy to clean due to smooth surfaces (ME8NT, MD4NT, MV2NT). A robust solution for numerous applications in
industrial environments
Specifications
Vacuum inlet
10 mm tubing nozzle:
ME4NT, ME4RNT, ME8NT, MZ2NT
KF DN16:
MZ2DNT, MD4NT, MV2NT
Pressure outlet
Silencer:
ME4NT, MZ2NT, MZ2DNT, MD4NT, MV2NT
Twin silencers:
ME8NT
Tubing nozzle:
ME4RNT
Type
Connector
Description
ME 2 NT
ME 4 NT
ME 4R NT
ME 8 NT
ME 8 NT
MZ 2 NT
MZ 2 NT
MZ 2D NT
MD 4 NT
MD 4 NT
MV 2 NT
MV 2 NT
CEE
CEE
CEE
CEE
CH
CEE
CH
CEE
CEE
CH
CEE
CH
one-stage
one-stage
one-stage
one-stage
one-stage
two-stage
two-stage
two-stage
three-stage
three-stage
four-stage
four-stage
Flow
rate
(50/60 Hz)
m³ / hr.
2,0 / 2,2
4.0 / 4.4
3.8 / 4.2
7.3 / 8.1
7.3 / 8.1
2.2 / 2.4
2.2 / 2.4
2.3 / 2.5
3.8 / 4.3
3.8 / 4.3
2.2 / 2.4
2.2 / 2.4
Ultimate
vacuum
Dimensions
(W x D x H)
mbar (abs).
70
70
100/4
70
70
7
7
4
1
1
0.5
0.5
mm
243 x 211 x 198
239 x 243 x 198
239 x 243 x 290
239 x 325 x 198
239 x 325 x 198
239 x 243 x 198
239 x 243 x 198
242 x 243 x 198
239 x 325 x 198
239 x 325 x 198
239 x 325 x 198
239 x 325 x 198
NEW!
2 Chemistry diaphragm vacuum pumps -NT Series
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
9.880 940
9.880 883
9.880 884
9.880 885
9.880 886
9.880 887
9.880 888
9.880 889
9.880 890
9.880 891
9.880 892
9.880 893
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
9.880 943
9.880 894
9.880 895
9.880 896
9.880 897
9.880 898
9.880 899
9.880 900
9.880 901
9.880 926
6.901 984
9.882 240
2
- improved performance, increased pumping speed (up to 8m³/h) and lower ultimate
VACUUBRAND
vacuum extend applications both in both the laboratory and industrial applications
- long-life diaphragm with PTFE sandwich construction and unstressed support
- easy service/exchange of diaphragm or valves due to novel integrated valve head assembly. Easy dismantling,
cleaning and reassembly without requiring readjustment
- whisper quiet and ultra low vibration due to compact drive with patented motor control system. Ideal as a built-in
component for sensitive equipment in both the laboratory and in industry
- superior vapour tolerance due to integral tubing connections. Types MZ2CNT and MD4CNT incorporate a gas ballast
valve as standard
- easy to clean due to smooth exterior surfaces
Specifications
Vacuum inlet:
Pressure outlet:
10mm tubing nozzle
10mm tubing nozzle
Type
Connector
Description
ME 2C NT
ME 4C NT
ME 4C NT
ME 8C NT
ME 8C NT
MZ 2C NT
MZ 2C NT
MD 4C NT
MD 4C NT
MD 4CRL NT
MD 4CRL NT
MD 4CRL NT
CEE
CEE
CH
CEE
CH
CEE
CH
CEE
CH
IEC
CEE
CH
single-stage
single-stage
single-stage
single-stage
single-stage
double-stage
double-stage
three-stage
three-stage
three-stage
mains cable
mains cable
Flow
rate
(50/60 Hz)
m³ / hr.
2,1 / 2,4
3,9 / 4,4
3,9 / 4,4
7,1 / 7,8
7,1 / 7,8
2,0 / 2,3
2,0 / 2,3
3,4 / 3,8
3,4 / 3,8
3,4 / 3,8
Ultimate
vacuum
Dimensions
(W x D x H)
mbar (abs).
70
70
70
70
70
7*
7*
1,5**
1,5**
1,5***
mm
243 x 211 x 198
243 x 255 x 198
243 x 255 x 198
243 x 325 x 198
243 x 325 x 198
243 x 243 x 198
243 x 243 x 198
243 x 325 x 198
243 x 325 x 198
243 x 325 x 198
Ultimate vacuum with gas ballast: *12 mbar, **3 mbar,
***diaphragm pump with reduced leakage rate
E & OE.
979
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
1
NEW!
1 Sealing kit NT for chemistry diaphragm pumps NT
VACUUBRAND
For Type
MD 4C NT
MZ 2C NT
ME 4 NT / MZ 2 NT
ME 8 NT
MZ 2D NT
MV 2 NT / MD 4 NT
ME 4C NT
ME 8C NT
980
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
6.239 489
6.241 476
9.880 902
9.880 903
9.880 904
9.880 905
9.880 906
9.880 907
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
Chemistry Vacuum Systems NT
1
Compact design, ready to use, no set-up required. Constructed in highly chemical
resistant materials. Quiet operation.
- 100% oil-free pumping of gases
- gas ballast as standard for working with condensable vapours
- good ultimate vacuum even with gas ballast
- high vapour tolerance for water and solvents
- long service life, low maintenance
VACUUBRAND
Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 NT(two-stage)/610 NT(three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 NT(two-stage)/611 NT(three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled
vacuum port
PC 520 NT(two-stage) /620 NT(three-stage) : with AK + EK; 2 electronically controlled vacuum ports
9.880 912
2
Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK:
e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK:
Well-proven unit for a wide range of applications for the single-user, e.g. gel drying, vacuum for gels that were
previously dried using water-jet pumps, e.g. sequence gels, SDS-PAGE up to 10%. For low-boiling-point solvents.
MD 1C +AK+EK:
Space-saving single-user configuration with 2 mbar ultimate vacuum. For high-boiling-point solvents.
MD 4C NT + AK+EK:
Larger or multi-user applications (e.g. several gel dryers) in a local-area vacuum network (VACUU·LAN®). 1.5/3 mbar
ultimate vacuum. For high-boiling-point solvents and/or gradient gels, SDS-PAGE >10%.
PC8 with MV 10C:
Four-stage diaphragm pump with exhaust vapour condenser. 0.9mbar ultimate vacuum. For particularly high demands
regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.
9.880.921
With vacuum controller:
PC 510 NT/511 NT:
Well-proven units for a wide range of processes in chemistry laboratories, e.g. all "classical" low-boiling-point solvents.
7/12mbar ultimate vacuum.
The PC 511 NT has an additional, manually controlled, vacuum port.
PC 610 NT /611 NT:
Well-proven units for vacuum generation and control up to 1.5/3mbar ultimate vacuum, including high-boiling-point
solvents.
The PC 611NT has an additional, manually controlled, vacuum port.
PC 520 NT/620 NT:
Synchro chemistry pumping units with two, independent, vacuum controllers for running two separate processes. PC
520 with 7/12mbar ultimate vacuum, PC 620 NT with 1.5/3mbar ultimate vacuum.
Type
Connector
MZ 2 C NT +2 AK
MZ 2 C NT +2 AK
MZ 2 C NT +AK+EK
MZ 2 C NT +AK+EK
MZ 2 C NT +AK SYNCHRO + EK
MZ 2 C NT +AK SYNCHRO + EK
MD 4 C NT +AK+EK
MD 4 C NT +AK+EK
MD 1 C +AK+EK
MD 1 C +AK+EK
PC 8 mit MV 10 C
PC 8 mit MV 10 C
PC 510 NT
PC 510 NT
PC 511 NT
PC 511 NT
PC 520 NT
PC 520 NT
PC 610 NT
PC 610 NT
PC 611 NT
PC 620 NT
PC 620 NT
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CEE
CH
Flow
rate
(50/60 Hz)
m³ / hr.
2,0 / 2,3
2,0 / 2,3
2.0 / 2.3
2,0 / 2,3
2.0 / 2.3
2,0 / 2,3
3.4 / 3.8
3.4 / 3.8
1.3 / 1.5
1,3 / 1,5
7.0 / 7.5
7,0 / 7,5
2.0 / 2.3
2.0 / 2.3
2.0 / 2.3
2.0 / 2.3
2.0 / 2.3
2.0 / 2.3
3.4 / 3.8
3.4 / 3.8
3.4 / 3.8
3.4 / 3.8
3.4 / 3.8
Ultimate
vacuum
Dimensions
(W x D x H)
mbar (abs).
7 / 12
7 / 12
7 / 12
7 / 12
7 / 12
7 / 12
1,5 / 3
1,5 / 3
2*
2*
0,9
0,9
7**
7**
7**
7**
7**
7**
1,5***
1,5***
1,5***
1,5***
1,5***
mm
242 x 319 x 309
242 x 319 x 309
242 x 326 x 402
242 x 326 x 402
242 x 326 x 402
242 x 326 x 402
242 x 326 x 402
242 x 326 x 402
275 x 270 x 490
275 x 270 x 490
507 x 367 x 429
507 x 367 x 429
243 x 419 x 444
243 x 419 x 444
243 x 435 x 444
243 x 435 x 444
361 x 435 x 444
361 x 435 x 444
243 x 419 x 444
243 x 419 x 444
243 x 435 x 444
361 x 435 x 444
361 x 435 x 444
PK Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.880 832
9.880 844
6.234 067
9.880 923
9.880 921
9.880 922
9.880 837
9.880 924
9.880 828
9.880 925
9.881 360
9.881 366
9.880 910
9.880 911
9.880 912
9.880 913
9.880 914
9.880 915
9.880 916
9.880 917
9.880 918
9.880 919
9.880 920
2
1
Ultimate vacuum with gas ballast: *4mbar, **12mbar, ***3mbar
E & OE.
981
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
Accessories for Automatic Vacuum Controller
VACUUBRAND
Description
External sensor VSK 3000
Cooling water valve VKW-B
Air bleed valve VBM-B
Extension cable for Vacuu·BUS, 2m
Y-Adapter Vacuu-BUS
Liquid level sensor for Vacuubrand 500ml catchpot
Peltronic emission condenser
PK
Cat. No.
1
1
1
1
1
1
1
9.882 850
9.882 852
9.882 849
9.882 853
9.882 854
9.882 848
9.880 852
1 Pumps, vacuum/pressure, diaphragm, for gel dryers
1
Highly efficient and oil-free. Inlet separator and exhaust condenser supplied
VACUUBRAND
- quiet running
- continuous, totally oil-free pumping of gases
- components in contact with gases are manufactured in chemical-resistant materials
- with gas ballast for reducing condensates
- Optimum service life, easy to exchange diaphragm and valves
- compact design with small footprint
- close to 100% solvent recovery
- easy to maintain
- supply requirements: 230V 50/60Hz
MZ 2C NT +AK+EK:
Ultimate pressure 7/12mbar.
Simple use (Gel dryer)
Vacuum for gels, which were previously evacuated using water jet
pumps, e.g. sequencing gels, SDS-PAGE up to 10%.
MD 4C NT +AK+EK:
Ultimate pressure 1.5/3mbar.
For high-boiling point solvents at low temperatures and/or gradient
Multiple use (several gel dryers) with
gels, SDS-PAGE >10 %.
Vacuulan® local vacuum network
MD 1C + AK + EK:
Ultimate pressure 2mbar.
Simple use (Gel dryer)
Space-saving and compact solution,
for high-boiling point solvents.
Type
Flow Ultimate
rate pressure
m³ / hr.
1.3 / 1.5
2.0 / 2.3
3.4 / 3.8
MZ 1C +AK+EK
MZ 2 C NT +AK+EK
MD 4C NT +AK+EK
mbar
2
9
2
PK
Cat. No.
1
1
1
9.880 828
6.234 067
9.880 837
2 VARIO® Chemistry Pumping Units
2
VARIO® Chemistry Pumping Units offer all the advantages of modern control technology
VACUUBRAND
and provide excellent possibilities for solvent recovery. They attain an ultimate vacuum
down to 0.6mbar. They are exceptionally quiet in operation and entirely oil-free. Inside the pump, vapours and gases
only come into contact with fluoroplastics of optimum chemical resistance.
VARIO® Chemistry Pumping Units provide vacuum control by adaptation of motor speed. This has clear advantages
compared to even the best of two-point control systems. The vacuum is continuously adjusted to actual process
requirements, irrespective of apparatus size and vapour volume. Process times are typically shortened by 30%. Solvent
recovery next to 100% is supported through continuous evaporation.
All VARIO® Chemistry Pumping Units include a chemistry diaphragm vacuum pump and an integrated vacuum controller
with display and vacuum sensor.
Type
Connector
PC 3001 VARIO
PC 3001 VARIO
PC 3002 VARIO
PC 3002 VARIO
PC 3003 VARIO
PC 3003 VARIO
PC 3004 VARIO
PC 3004 VARIO
PC 3010 VARIO
PC 3010 VARIO
PC 3012 VARIO
PC 3012 VARIO
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
CH
CEE
982
Flow Ultimate
rate pressure
m³ / hr.
1.7
1.7
2.8
2.8
2.8
2.8
4.6
4.6
8.6
8.6
10.0
10.0
mbar
2/4
2/4
7 / 12
7 / 12
0.6 / 2
0.6 / 2
1.5 / 3
1.5 / 3
0.6 / 9
0.6 / 9
2/9
2/9
Weight
Width
Depth
Height
PK
Cat. No.
kg
7.7
7.7
17.9
17.9
20.5
20.5
20.5
20.5
35.8
35.8
35.8
35.8
mm
306
306
258
258
258
258
258
258
645
645
645
645
mm
300
300
422
422
422
422
422
422
365
365
365
365
mm
400
400
516
516
516
516
516
516
600
600
600
600
1
1
1
1
1
1
1
1
1
1
1
1
9.881 336
9.881 337
9.881 335
9.881 338
9.881 334
9.881 346
9.881 333
9.881 339
9.881 331
9.881 340
9.881 332
9.881 341
E & OE.
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
NEW!
1 VARIO® Chemistry Pumping PC 3001 VARIO® with conderser Peltronic™
1
This VARIO® chemistry pumping unit provides vacuum control by precise and continuous
VACUUBRAND
adaptation of the diaphragm pump's motor speed. The compact size and low weight of
the pumping unit offer great convenience in the lab. The pump's variable motor speed responds to demand, reducing
energy waste and mechanical wear, ensuring unrivalled service life for the diaphragms. The PC 3001 is based on MD 1C
chemistry diaphragm pump; The emission conderser Peltronic™ at outlet of the pump is highly efficient with a very
compact design. It provides near-100% recovery of solvents without any external coolants.
Items supplied:
VARIO® chemistry pumping unit PC 3001 VARIO completely mounted with conderser Peltronic™, ready for use, with
manual. Without mains cable, please order separately.
Description
Connector
PC 3001 VARIO
with conderser Peltronic™
Power cable
Power cable
Flow Ultimate
rate pressure
m³ / hr. mbar
1.7 2
Weight
Width
Depth
Height
PK
Cat. No.
kg
10.0
mm
400
mm
300
mm
400
1
9.881 330
1
1
6.901 984
9.882 240
CEE
CH
2 Exhaust Vapour Condenser Peltronic
2
- Solvent recovery without coolants, such as water or dry ice
VACUUBRAND
- Fully automatic electronic control of cooling surface temperature and fan
- Ideal for integrated laboratory vacuum installations: No need for coolant pipes - no installation cost, no risk of water
damage
Specifications:
Cooling power at 21°C:
Ambient temperature range:
Preset cooling temperature:
Inlet connection (thread for PTFE tube):
Outlet connection:
Condensate catchpot:
Materials in contact with media:
Mains supply:
Power consumption:
Dimensions (WxDxH):
Weight approx.:
50W
10 to 40°C
10°C
10/8mm
Hose nozzle DN 10, or thread
for PTFE tube 10/8 mm
500ml/with KS 35
PP, PFA, ETFE/ECTFE, borosilicate glass
100 - 230V 50/60Hz
7 to 60W (controlled)
175 x 179 x 392mm
4.3kg
Type
PK
Cat. No.
1
9.880 852
With self-drying system for vacuum drying. Oil-free, positive displacement pumps for
neutral, highly aggressive or corrosive gases and vapours. Unadulterated, pumped
gas/vapour output. Constant vacuum. More environment-friendly and cost-effective than water jet pumps.
KNF
Peltronic
3 Diaphragm vacuum pumps LABOPORT®-SD, chemically-resistant
3
The new self-drying system enables condensate to be blown out of the pumphead at high speed during the evacuation
process. The vacuum in the vessel being pumped remains constant. The drying cycle can be synchronised in three
different ways according to individual process requirements. With drying the pump achieves a better vacuum and can
evacuate more quickly than pumps without drying systems.
Pump components that come into contact with media
Pump head: PTFE
Diaphragm: PTFE
Valves: FFPM
Supplied as follows: Chemistry laboratory vacuum pumps are complete instruments that are ready for connection with
mains switch, mains cable (supply requirements: 230V/50Hz, other voltages and frequencies available on request) and
fully automatic self-drying system. Easy connection to vacuum desiccator cabinets.
Type
N 820.3 FT.40.18
N 840.3 FT.40.18
N 842.3 FT.40.18
Flow
rate
L / min.
20
34
34
Ultimate
vacuum
mbar (abs).
10
10
4
Width
Length
Height
PK
Cat. No.
mm
177
189
189
mm
312
341
341
mm
220
239
242
1
1
1
9.880 615
9.880 616
9.880 617
E & OE.
983
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems
1
1 Diaphragm vacuum pumps LABOPORT®
PTFE diaphragm pumps for evacuating and pumping corrosive gases and vapours.
KNF
Maintenance and oil free. Pumpheads and valves are made of chemically resistant
materials. Freely moving, stress resistance-optimised, structured diaphragm achieves maximum vacuum performance
from even the smallest dimensions. A sealed PTFE coating on the diaphragm and a special sealing zone on the outer rim
of the diaphragm make these pumps exceptionally gas-tight. High vapour and condensate compatibility is afforded by a
new valve system. Compact, space-saving design. Built-in foldaway handle.
Supply requirements: 230V, 50Hz.
Type
N 810.3 FT.18
N 820.3 FT.18
N 840.3 FT.18
N 842.3 FT.18
N 840.1.2 FT.18
2
Flow
rate
L / min.
10
20
34
34
60
Ultimate
vacuum
mbar (abs).
8
8
8
2
90
PK
Cat. No.
1
1
1
1
1
9.880 612
9.880 613
9.880 614
9.880 675
9.880 660
2 Double diaphragm pumps, oil-free
Oil-free, air-operated, double diaphragm pumps are an ideal solution for handling
Lutz Pumpen
viscous, corrosive, abrasive and flammable liquids.
Pump inlet size ¼" (larger pumps on request).
The pumps are available in Polypropylene (PP), PVDF and Nylon.
The diaphragms, balls and valve seats are available in Geolast® and PTFE . Solids up to 1.6mm diameter can be
pumped.
Specifications
Flow rate:
16L/min
Suction lift dry:
6m
Operating pressure:
min. 1.4 bar/max. 6.8 bar
Temperature max:
66°C
Suction/ Discharge:
¼” BSP female
Description
Material
Membrane
For liquids based on water,
lubricant, mineral oil
For corrosive liquids,
inorganic alkalis and acids
For concentrated alkalis and
acids with higher temperature
For solvents, paints, fuel
PP
3
PK
Cat. No.
Geolast®
1
9.880 350
PP
PTFE
1
9.880 351
PVDF
PTFE
1
9.880 352
Nylon
PTFE
1
9.880 353
3 Pumps, vacuum/pressure, diaphragm
These diaphragm pumps are single- and double-head, dry-running devices used in a wide
range of laboratory applications. They transfer and pump down without contamination.
The pumps are offered in various materials.
KNF
Standard design. For general vacuum and pumping applications.
Supply requirements: 230V 50Hz.
Pump head/Material in contact with the pumped media
KN = PP/EPDM
KT = PP/PTFE-coated
AN = Aluminium/CR
FT = PTFE/PTFE-coated
Type
N 86 KN.18*
N 86 KT.18*
N 811 KN.18*
N 022 AN.18*
N 816.3KN.18*
N 820 FT.18**
N 820 AN.18**
N 820.3 AN.18**
N 026.3 AN.18*
N 816.1.2KN.18*
N 026.1.2 AN.18*
N 035 AN.18*
N 035.1.2 AN.18*
N 035.3 AN.18*
N 035 AN.18**
N 035.1.2 AN.18**
N 035.3 AN.18**
Flow
rate
L / min.
6
6
11
15
16
20
22
22
22
30
39
30
55
30
30
55
30
Ultimate
vacuum
mbar (abs).
100
160
240
100
15
100
100
8
20
100
100
100
100
13
100
100
13
* IP20 protection system.
** IP44 protection system.
984
E & OE.
Max. Accessory
pressure codes
type
bar (see table)
2.4 1+2+6+13
2.4 1+2+6+13
2 2
4 2+4+14+10
0.5
1
1
1
- 3+9
0.5
2 3+5+8+9
4
4
4 3+12+7+11
4 3+12+7+11
-
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.880 510
9.880 680
9.880 685
9.880 530
9.880 543
9.880 670
9.880 687
9.880 688
9.880 538
9.880 544
9.880 537
9.880 539
9.880 547
9.880 554
9.880 540
9.880 541
9.880 553
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Diaphragm pumps, Pump systems-Rotary vane pumps, Pump systems
Accessories for standard diaphragm pumps
KNF
Type
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
vacuum filter / silencer
vacuum filter / silencer
vacuum filter / silencer
pressure relief valve, 4 bar
pressure relief valve, 2 bar
fine adjustment heads with pressure gauge
fine adjustment heads with pressure gauge
fine adjustment heads with pressure gauge
fine adjustment heads with pressure gauge
fine adjustment heads with pressure gauge
fine adjustment heads with pressure gauge
Overpressure valve ¼'', 4 bar
fine adjustment heads with pressure gauge
fine adjustment heads with pressure gauge
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.880 515
9.880 519
9.880 548
9.880 641
9.880 664
9.880 532
9.880 545
9.880 533
9.880 534
9.880 536
9.880 546
9.880 642
9.880 531
9.880 535
1 Vacuum pump trolley
1
Vacuum pump trolley with two condensate traps that can be operated alternately or
KGW
together. The pump trolley consists of an aluminium frame mounted on lockable castors
with a lower PE-shelf for a vacuum pump and a PE-top shelf which accommodates two cold traps. The condensate traps
can each hold approx. 150ml. Spherical ground joints are sealed with FEP covered O-rings. Supplied without pump.
Type
With pressure gauge
Without pressure gauge
PK
Cat. No.
1
1
9.881 380
9.881 381
Note: Price does not include vacuum pump.
2 Rotary vane pumps
2
Vacuubrand rotary vane pumps encompass one and two stage pumps with throughputs
VACUUBRAND
from 2 to 16m³/h.
Typical rotary vane pump applications include, use as a backing pump for turbomolecular pumps but also serve in
diverse chemical laboratory applications.
Features and important characteristics: high water vapour tolerance, vacuum tight pumping mechanism when switched
off, high performance gas ballast mechanisms. These increase the overall performance potential of these pumps, the
service life of mechanical parts, increase oil-change intervals and reduce maintenance overheads.
Type
RE 2.5
RE 6
RE 9
RE 16
RZ 2.5
RZ 6
RZ 9
RZ 16
Flow Ultimate
rate pressure
m³ / hr.
2.3 / 2.8
5.7 / 6.8
8.9 / 10.2
16.6 / 19.1
2.3 / 2.8
5.7 / 6.8
8.9 / 10.2
16.6 / 19.1
mbar
3 x 10-1
1 x 10-1
1 x 10-1
1 x 10-1
2 x 10-3
2 x 10-3
2 x 10-3
2 x 10-3
Weight
Width
Depth
Height
PK
Cat. No.
kg
10.2
15.3
21.4
25.2
11.4
16.4
24.2
29.0
mm
316
370
460
505
316
370
460
545
mm
125
142
152
152
125
142
152
152
mm
190
207
232
232
190
207
232
232
1
1
1
1
1
1
1
1
9.880 120
9.880 121
9.880 101
9.880 102
9.880 123
9.880 124
9.880 125
9.880 104
E & OE.
985
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Rotary vane pumps, Pump systems
1 Chemistry pumping units
1
Vacuubrand chemistry vacuum systems and chemistry pumping units for fine to high
vacuum ranges. Complete chemical vacuum systems and chemical pump stands offer the
advantages of practical, connection-ready units.
- compact structure, little space requirement and a high degree of mobility
- the great convenience of proven pump stand configuration
- good ultimate vacuum even with gas ballast and smooth running
- high tolerance to water and solvent vapours due to efficient gas ballast
Type
Pump
PC 3 with RZ 2.5
PC 3 with RZ 6
PC 3 with RZ 9
PC 3 with RZ 16
Model
RZ 2.5
RZ 6
RZ 9
RZ 16
2
Flow
rate
(50/60 Hz)
m³ / hr.
2.3 / 2.8
5.7 / 6.8
8.9 / 10.2
16.6 / 19.1
Ultimate
pressure
mbar
4 x 10-4
4 x 10-4
4 x 10-4
4 x 10-4
VACUUBRAND
Width
Depth
Height
PK
Cat. No.
mm
342
370
460
545
mm
448
448
486
486
mm
608
608
608
608
1
1
1
1
9.881 368
9.881 369
9.881 370
9.881 371
2 Chemistry Hybrid Pump RC 6
The Chemistry Hybrid Pump RC 6 has been designed to minimise the adverse effects of
VACUUBRAND
condensable and corrosive vapours. Its main components are a two-stage rotary-vane
pump and a two-stage chemistry diaphragm for optimited corrosion resistance. The diaphragm pump continuously
evacuates the oil reservoir of the rotary-vane pump in order to keep the partial pressures of solvent vapours, oxygen
and corrosive gases at a low level and/or below their condensation point. The RC 6 is a low-maintenance pump for
freeze-drying and other applications requiring an ultimate vacuum in the 10-³ mbar range.
Items supplied: Pump with on/off switch, overload circuit breaker and 2m cable with plug, centering and clamping ring
for inlet, particulate filter and operating instructions. Oil supplied in separate bottle.
Specifications
Pumping speed 50/60 Hz:
Ultimate vacuum (partial) without gas ballast:
Ultimate vacuum (total) without gas ballast:
Ultimate vacuum (total) with gas ballast:
Oil capacity (B-Oil):
Inlet connection:
Outlet connection:
Motor rating:
Nominal speed 50/60Hz:
Dimensions (L x W x H):
Weight:
Protection class:
Type
RC 6 with plug CEE
RC 6 with plug CH
986
E & OE.
5.9/6.9 m³/h // 4.1cfm
4 x 10-4 mbar // 3 x 10-4 Torr
2 x 10-³ mbar // 1.5 x 10-³ Torr
1 x 10-² mbar // 0.75 x 10-² Torr
min. 0.34 l
max. 0.53 l
Small flange NW 16
Hose nozzle NW 10
0.37kW
1500/1800rpm
510 x 305 x 230mm
24.2kg
IP 40
PK
Cat. No.
1
1
9.882 235
9.882 236
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Rotary vane pumps, Pump systems
Chemistry Vacuum Pumping Unit PC 8/RC 6
The Chemistry Vacuum Pumping Unit PC 8/RC 6 incorporates the Chemistry Hybrid
VACUUBRAND
Pump RC 6 (Cat. No. 9.882 235). It achieves an ultimate vacuum in the 10-4 mbar
range and is used for demanding vacuum applications such as freeze drying, drying chambers, concentrators, etc. The RC 6 combines the vacuum performance
of an oil-sealed rotary-vane pump and, to a large extent, the good corrosion resistance of a chemistry diaphragm pump.
Items supplied:
Pumping unit completely mounted, with Chemistry Hybrid Pump RC6, insulated exhaust vapour condenser,condensate catchpot on pumping unit console, on/off
switch, cable with plug and instructions for use.
Specifications
Pumping speed 50/60 Hz:
Ultimate vacuum (partial) without gas ballast:
Ultimate vacuum (total) without gas ballast:
Ultimate vacuum (total) with gas ballast:
Oil capacity (B-Oil):
Inlet connection:
Outlet connection:
Cooling water connection:
Motor rating:
Nominal speed 50/60Hz:
Dimensions (L x W x H):
Weight:
Protection class:
5.9/6.9 m³/h // 4.1cfm
4 x 10-4 mbar // 3 x 10-4 Torr
2 x 10-³ mbar // 1.5 x 10-³ Torr
1 x 10-² mbar // 0.75 x 10-² Torr
min. 0.34 l
max. 0.53 l
Small flange NW 16
Hose nozzle NW 10
2 x hose nozzle NW 6/8
0.37kW
1500/1800rpm
507 x 377 x 430mm
31.4kg
IP 40
Type
PK Cat. No.
PC 8 / RC 6 with plug CEE
Plug CH
1 9.882 239
1 9.882 240
1
1
9.882 239
E & OE.
987
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Rotary vane pumps, Pump systems
1
9.812 385
2
Vacuum Pumps
NEW!
Rotavac Valve Control
- Two-stage diaphragm pump made from chemically resistant materials
- High suction capacity of 1.7m³/h for fastest evacuation
- Suction capacity for up to 3 rotary evaporators at the same time
- The Rotavac Valve Control achieves an ultimate vacuum of 9mbar
- The Rotavac Valve Control can be combined with a condenser
- Power input: 180W; Weight: 10.5kg
- Dimensions (L x W x H): 245 x 185 x 195mm
Heidolph
Rotavac Vario Control
Adjustable speed of the pump produces the most precise vacuum control
- Three-stage diaphragm pump is made from chemically resistant materials
- High suction capacity of 1.7m³/h for fastest evacuation
- The Rotavac Vario Control achieves an ultimate vacuum of 2mbar
- The Rotavac Vario Control can be combined with a condenser
- Power input: 160W; Weight: 5.4kg
- Dimensions (L x W x H): 236 x 167 x 196mm
Rotavac Valve Tec
- Two-stage diaphragm pump made from chemically resistant materials
- Suction capacity of 0.75m³/h
- The Rotavac Valve Tec achieves an ultimate vacuum of 12mbar
- The Rotavac Valve Tec can be combined with a condenser
- Power input: 80W; Weight: 6kg
- Dimensions (L x W x H): 315 x 145 x 169mm
9.812 477
Rotavac Vario Tec
- Two-stage diaphragm pump is made from chemically resistant materials
- Suction capacity of 1.0m³/h
- The Rotavac Vario Tec achieves an ultimate vacuum of 12mbar
- The Rotavac Vario Tec can be combined with a condenser
- Power input: 160W; Weight: 4.3kg
- Dimensions (L x W x H): 236 x 156 x 196mm
3
Vacuum Valve
- Required to control vacuum for Hei-VAP models with valve regulated pumps
6.231 964
Woulff Bottle
- Additional recovery of solvent to protect vacuum valve and vacuum pump
- Direct connection to the vacuum valve
- Features connection to vacuum controller
- Volume of 250ml
4
Type
9.812 478
5
PK Cat. No.
Rotavac Valve Control
Cooler for Rotavac Valve Control Hei-VAP
Rotavac Vario Control for Hei-VAP
Cooler for Rotavac Vario Control
Rotavac Valve Tec for Hei-VAP
Cooler for Rotavac Valve Tec for Hei-VAP
Rotavac Vario Tec for Hei-VAP
Vacuum Valve
Woulff Bottle
Switchbox
Manual Vacuum Controller
1
1
1
1
1
1
1
1
1
1
1
Fully controllable stand-alone pumping unit includes vacuum controller - all
purpose
988
1
2
3
4
NEW!
5 Rotavac Vario Pumping unit
-
9.812 385
6.401 205
9.812 477
9.812 377
6.231 964
9.812 378
9.812 478
9.812 405
9.812 406
6.223 990
9.812 388
Heidolph
Three-stage diaphragm pump is made from chemically resistant materials
High suction capacity of 1.7 ³m/h for fastest evacuation
The Rotavac Vario Pumping unit achieves an ultimate vacuum of 5mbar
The Rotavac Vario Pumping unit can be combined with a condenser (order nr. 9.812 377)
Power input: 160W, Weight: 6kg
Dimensions (L x W x H): 193 x 263 x 299mm
Type
Description
PK
Cat. No.
Rotavac Vario
Pumping unit
1
9.812 365
E & OE.
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Rotary vane pumps, Pump systems
NEW!
1 LABOBASE® multi-user vacuum systems, chemical-resistant
1
Comprises a central base station with vacuum controller which provides a vacuum to
KNF
multiple laboratory work stations or outlets. Outlets may either be controlled with a
separate vacuum controller plus solenoid valve (even as a mobile unit) or with a manual valve as an unregulated outlet.
LABOBASE® can be retrofitted into existing laboratories or integrated into new constructions. This multi-user, vacuum
system saves precious lab bench space.
Pump units or base stations are connection ready; complete with chemical-resistant, diaphragm vacuum pump and
appropriate fittings (see table) on a single base stand, power cable (mains connection 230V 50Hz, other voltages and
frequencies on request).
Integral components
diaphragm vacuum pump with base stand, separator, condenser and vacuum controller
Description
Base unit LABOBASE® SBC 840
Base unit LABOBASE® SBC 844
Base unit LABOBASE® SBC 860
Mobile control unit
for regulated outlet
Vacuum supply point manually
controlled for fume hoodschemical resistant
Vacuum supply point manually
controlled, chemical resistant
Flow
rate
l / min.
34
40
60
Ultimate
vacuum
mbar (abs).
8
2
2
2 Vacuum system LABOXACT®, chemical-resistant
PK
Cat. No.
1
1
1
1
9.050 715
9.050 716
9.050 717
9.050 721
1
9.050 722
1
9.050 723
2
Rotary evaporation processes can be reliably monitored using the LABOXACT® vacuum
system. A closed system arrangement enables gentle distillation and high recovery rates,
even with low-boiling solvents.
KNF
Advantages:
- gentle distillation, due to closed system
- stepless, fine-adjustment valve for precise vacuum regulation
- careful control of evaporation
- very economical
- environmentally friendly
Items supplied:
LABOXACT® vacuum systems are ready-to-use. With chemically resistant membrane vacuum pump, separator,
condenser, fine-adjustment valve, digital vacuum meter, safety vent valve, switch and cable. Supply requirements:
230V 50Hz (other voltages and frequencies are available on request).
Type
SEM 810
SEM 820
SEM 840
SEM 842
Flow
rate
L / min.
10
20
34
34
Ultimate
vacuum
mbar (abs).
8
8
8
2
PK
Cat. No.
1
1
1
1
9.880 549
9.880 550
9.880 551
9.880 552
We can supply this
manufactorer’s
whole
product range !
E & OE.
989
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Rotary vane pumps, Pump systems
1 Modular vacuum system KNF LABOPORT®
1
All LABOPORT® pumps can be fitted with separators, high-performance condensers and
KNF
vacuum controllers to create customised systems. If a larger diaphragm pump is used
for two different processes simultaneously for economic reasons, then a second vacuum controller is required. The
control unit always switches the pump off when the desired vacuum has been achieved, even if two receivers are used.
This reduces the noise level and increases operational life. Supply requirements: 230V /50Hz.
Module/configuration:
1. Baseplate.
The separator and all other modules are mounted together with the pump on the baseplate to form the LABOPORT®
vacuum system
2. Separator.
Additional, implosion-proof NR 800 module can be integrated on the inlet or outlet side.
Solvent droplets contained in the vapour at the outlet are separated to prevent them from being released into the
surrounding air. On the inlet side the separator traps any particles contained in the system.
3. High-performance condenser.
For efficient condensation of solvents contained in the vapour. Connected to the pump at the outlet enabling controlled
solvent recovery, saving valuable resources and protecting the environment.
4./5. Vacuum controller.
For precise and accurate attainment of the required vacuum after the set point has been entered. A highly accurate,
piezo-ceramic measuring cell monitors the process and is resistant to all aggressive media.
Simple assembly.
Components can be quickly and easily assembled to create a system using plug-in connectors.
Type
LABOPORT® SR 810
LABOPORT® SH 810
LABOPORT® SC 810
LABOPORT® SCC 810
LABOPORT® SR 820
LABOPORT® SH 820
LABOPORT® SC 820
LABOPORT® SCC 820
LABOPORT® SR 840
LABOPORT® SH 840
LABOPORT® SC 840
LABOPORT® SC 842
LABOPORT® SCC 840
LABOPORT® SCC 842
Flow
rate
L / min.
10
10
10
10
20
20
20
20
34
34
34
34
34
34
Ultimate
vacuum
mbar (abs).
8
8
8
8
8
8
8
8
8
8
8
2
8
2
Pump
Model
N 810.3 FT.18
N 810.3 FT.18
N 810.3 FT.18
N 810.3 FT.18
N 820.3 FT.18
N 820.3 FT.18
N 820.3 FT.18
N 820.3 FT.18
N 840.3 FT.18
N 840.3 FT.18
N 840.3 FT.18
N 842.3 FT.18
N 840.3 FT.18
N 842.3 FT.18
Module
no.
1A 2 2
1A 2 3
1A 2 3 4
1A 2 3 4 5
1A 2 2
1A 2 3
1A 2 3 4
1A 2 3 4 5
122
123
1234
1234
12345
12345
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.880 621
9.880 622
9.880 623
9.880 624
9.880 625
9.880 626
9.880 627
9.880 628
9.880 629
9.880 631
9.880 632
9.880 639
9.880 633
9.880 640
Accessory modules for vacuum pump systems LABOPORT®
Modules for LABOPORT® system vacuum pumps.
See details outlined below for the relevant descriptions.
Module
no.
Type
1A
1
3
4
5
Baseplate NP 810/820
Baseplate NP 840
High-performance condenser
Vacuum controller (First controller)
Vacuum controller (Second controller)
990
KNF
E & OE.
PK
Cat. No.
1
1
1
1
1
9.880 643
9.880 634
9.880 636
9.880 637
9.880 638
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Rotary vane pumps, Pump systems-Accessories
1 2 Variable speed vacuum system SC 920 with remote control
1
Freeing up space in the lab: this vacuum pump system can be placed above or below the
KNF
lab bench and controlled remotely with the hand terminal. The new vacuum pump
system SC 920 now supports remote control from a portable handset, thus ensuring maximum flexibility in the
laboratory. Short process times and high accuracy, and automatic boiling point detection are the outstanding features of
this new product.The intuitive user guidance on the handset ensures ease of operation; the process parameters can be
entered over a touch screen and a rotary knob.
Simply touch the various menus to enter:
- parameters, such as the setpoint
- pressure or suction capacity of the system
- units of measurement
- operating language
- operating modes
2
Specifications
Control:
over hand terminal and
Windows®-based software
100-240V 50/60Hz
max. 135W
10mm i.d.
8mm i.d.
max. 1.7A
15kg
423 x 366 x 294mm
Mains connection:
Power consumption:
Hose connections, pneumatic:
Hose connections for coolants:
Current consumption:
Weight:
Dimensions (H x W x D):
Type
Description
SC 920
Vacuum pump system
Flow
rate
L / min.
20
Vacuum
PK
Cat. No.
mbar
2
1
9.880 645
With overload protection and mains fuse
3 Oil for rotary vane pumps
3
Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure,
VACUUBRAND
good chemical resistance.
Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump
must be factory-adjusted to accept this oil.
Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen.
Type
Capacity
L
1.00
5.00
1.00
5.00
0.50
Oil for rotary vane pumps B
Oil for rotary vane pumps B
Oil for rotary vane pumps K 8
Oil for rotary vane pumps K 8
Perfluorpolyether oil
PK
Cat. No.
1
1
1
1
1
9.881 921
9.881 922
9.881 911
9.881 915
9.882 924
4 Small flange fittings
4
Small flanges. Stainless steel. With male or female conical ground joints and DN flange
as outlined below.
Type
NS
Male ground joint - DN 10
Male ground joint - DN 10
Male ground joint, DN 25
Male ground joint - DN 25
Male ground joint - DN 40
Male ground joint - DN 40
Female ground joint - DN 10
Female ground joint DN 10
Female ground joint - DN 25
Female ground joint - DN 25
Female ground joint - DN 40
Female ground joint - DN 40
14 / 23
19 / 38
19 / 38
29 / 32
29 / 32
45 / 40
14 / 35
19 / 38
19 / 38
29 / 32
29 / 32
45 / 40
VACUUBRAND
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
9.882 504
9.882 501
9.882 502
9.882 503
9.882 505
9.882 507
9.882 510
9.882 511
9.882 512
9.882 513
9.882 514
9.882 515
5 Vacuum fittings, clamping rings for type KF small flange
5
VACUUBRAND
Type
Size
Aluminium
Aluminium
Aluminium
Aluminium
Stainless steel
Stainless steel
Stainless steel
Stainless steel
DN 10/16
DN 20/25
DN 32/40
DN 50
DN 10/16
DN 20/25
DN 32/40
DN 50
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
9.882 401
9.882 402
9.882 403
9.882 404
9.882 411
9.882 412
9.882 413
9.882 414
991
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Accessories
1
1 Vacuum fittings, centring rings
Stainless steel/FPM (e.g. Viton®). For Type KF small flange.
Size
DN 10
DN 16
DN 20
DN 25
DN 32
DN 40
DN 50
2
Type
Size
NBR
NBR
NBR
NBR
FPM
FPM
FPM
FPM
DN 10/16
DN 20/25
DN 32/40
DN 50
DN 10/16
DN 20/25
DN 32/40
DN 50
DN 10
DN 16
DN 16
DN 25
DN 25
DN 25
DN 25
DN 40
DN 40
DN 40
For
tubing Ø
mm
6
6
10
8
10
12
15
8
10
15
9.882 415
9.882 419
9.882 416
9.882 420
9.882 417
9.882 421
9.882 418
PK
Cat. No.
1
1
1
1
1
1
1
1
9.882 441
9.882 442
9.882 443
9.882 444
9.882 451
9.882 452
9.882 453
9.882 454
VACUUBRAND
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
9.882 492
9.882 497
9.882 498
9.882 494
9.882 493
9.882 491
9.882 495
9.882 499
9.882 490
9.882 496
4 Vacuum fittings, PVC tubing with KF flanged, support spiral insert
Flanged at both ends. For Type KF small flange. Resistant to most chemicals.
Size
DN 16
DN 16
DN 25
DN 25
DN 40
DN 40
Length
mm
500
1000
500
1000
500
1000
VACUUBRAND
PK
Cat. No.
1
1
1
1
1
1
9.882 611
9.882 612
9.882 613
9.882 614
9.882 615
9.882 616
5 Vacuum fittings, flexible metal tubing, concertina
Flanged at both ends. For Type KF small flange.
B1 = Minimum radius for one-off bending.
B2 = Minimum radius for repeated bending.
Size
DN 10
DN 10
DN 10
DN 10
DN 16
DN 16
DN 16
DN 16
DN 25
DN 25
DN 25
DN 25
DN 40
DN 40
DN 40
DN 40
992
1
1
1
1
1
1
1
3 Vacuum fittings, nozzles
Size
5
Cat. No.
VACUUBRAND
Flanged tubing nozzles, aluminium. For Type KF small flange.
4
PK
2 Vacuum fittings, external centering rings
Plastic 'PBT'. For Type KF small flange.
3
VACUUBRAND
Length B1
mm
250 18
500 18
750 18
1000 18
250 25
500 25
750 25
1000 25
250 35
500 35
750 35
1000 35
250 60
500 60
750 60
1000 60
VACUUBRAND
B2
PK
Cat. No.
50
50
50
50
75
75
75
75
100
100
100
100
150
150
150
150
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.882 591
9.882 592
9.882 594
9.882 593
9.882 596
9.882 597
9.882 599
9.882 598
9.882 601
9.882 602
9.882 604
9.882 603
9.882 606
9.882 607
9.882 609
9.882 608
E & OE.
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Accessories-Measurement, control devices
1 In-line valves
1
Butterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N
rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10-6 mbar x l/s.
Excellent throughput.
Type
VS 16C
VS 25C
VS 40C
Valve
bore
mm
16
25
40
VACUUBRAND
PK
Cat. No.
1
1
1
9.882 007
9.882 008
9.882 009
2 Vacuum measuring instrument DVR 2
2
The DVR 2 is a versatile vacuum gauge for vacuum measurement between atmospheric
VACUUBRAND
pressure and 1 mbar.
The DVR2 has an integral, alumina ceramic, pressure transducer providing excellent corrosion resistance and long-term
stability.
Specificationen
Measuring range:
Measurement principle:
Measuring accuracy:
Power supply/battery:
Dimensions (WxDxH):
Weight:
1080 to 1mbar (hPa), 810 to 1 Torr
Capacitive; gas type-independent absolute pressure measurement
< 1mbar (0.75 Torr) ±1 digital
9V Lithium battery/1.2 Ah Ultralife U9VL
115 x 115 x 66mm
0.40kg
Type
Vacuum measuring instrument DVR 2
DKD initial delivery calibration
PK
Cat. No.
1
1
9.882 200
9.882 221
3 Vacuum measuring instrument DCP 3000
3
The DCP 3000 is an outstanding vacuum gauge for rough and fine vacuum (1080 to
VACUUBRAND
0.1mbar). A large illuminated display shows the measuring values of all sensors by a
simple turn of a button. The VSK 3000 capacitive vacuum gauge head measures independent of gas type, is very
corrosion resistant and has an outstanding measuring accuracy and long term stability. Simultaneous connection of up
to four of these pressure transducers allows flexible measuring on the spot. The communication of the DCP 3000 and
the external components proceeds via the VACUU-BUS™ digital bus system. This system is characterized by fully
automatic configuration, unified plug connections and cable lengths of up to 30m. Supply requirements: 100-230V
50/60Hz CEE/CH/UK/US/AUS.
Items supplied: Vacuum gauge, ready to use with 1 vacuum gauge head VSK 3000 with measuring cable, wallmounted power supply and manual
- external sensor on-the-spot measuring, flexible and upgradeable up to four sensors
- external capacitive alumina-ceramic vacuum gauge head with excellent chemical resistance
- outstanding measuring accuracy and long term stability
- splash-proof pressure transducer for tough operation conditions
- datalogger with 32000 measurement reading recording capacity
Specifications
Measurement range:
1080 to 0.1mbar (hPa),
810 to 0.1 Torr
Measuring principle:
Capacitive; gas type independent, absolute pressure measurement
Measurement accuracy:
< ±1 mbar (Torr) ±1 digit
Vacuum connection:
Small flange KF DN 16, PTFE-tubing conn. 10/8mm, hose nozzle DN 6/10mm
Power supply:
100-230V/50-60Hz
Dimensions (L x W x H):
138 x 124 x 115mm
Weight of display unit:
0.44kg
Type
DCP 3000
DKD initial delivery calibration
E & OE.
PK
Cat. No.
1
1
9.882 206
9.882 221
993
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Measurement, control devices
1
1 DCP 3000 with VSP 3000
The Pirani-type vacuum sensor VSP 3000 offers an outstanding corrosion resistance and
VACUUBRAND
mechanical robustness for fine vacuum measurements. It is primarily designed for
applications in chemistry and process engineering.
The vacuum gauge DCP 3000 is now also available with this new Pirani sensor VSP 3000 for an increased measuring
range down to the 10-³mbar range. Up to eight external gauge heads (four of ceramic diaphragm-type VSK 3000 and
four VSP 3000) can be connected simultaneously to the DCP 3000 vacuum gauge for easy measurements at multiple
points. Communication between the DCP 3000 and the external components is provided by the especially developed bus
control system VACUU·BUS™. It is self-configuring, easy to use due to standardized plug connectors and allows cable
extensions up to 30m. The large illuminated display, controlled by a simple jog wheel, displays the readings from each
gauge head.
Performance features
- brand new rugged vacuum sensor VSP 3000 made of plastics and ceramics with high chemical resistance
- wide measurement range from atmospheric pressure to fine vacuum (10-³mbar) due to Pirani measurement system
(thermal conductivity)
- upto 8 gauge heads VSP 3000 (Atm. to 10-³mbar), VSK 3000 (Atm. to 0.1mbar) can be connected ( 4 of each)
- rugged, splash-water proof vacuum sensor, also for rough operating conditions
- with vacuum controller CVC 3000, VSP 3000 and vacuum solenoid valves of type VV-B vacuum control from atm. to
10-³ mbar is achieved
Specifications:
Upper measuring limit mbar/hPa/torr:
Lower measuring limit mbar/hPa/torr:
Measurement principle
Measurement uncertainty
Vaccum connection
Control connections:
1 x 10³/7.5 x 10²
1 x 10-³/1 x 10-³
Thermal conductivity acc. to Pirani
±15% of indicated value in the range 0.01-100mbar/hPa/torr
Small flange KF DN 16 and hose nozzle DN 6/10mm
1 socket for supply/Vario pump
2 expandable sockets for external sensors/valves
100-240V 50/60 Hz a.c. 1ph.
138 x 124 x 115mm
0.44kg
Rated mains voltage
Dimensions (desktop unit, L x W x H):
Weight (without mains adapter):
Description
Vacuum gauge Set DCP 3000 + VSP 3000
PK
Cat. No.
1
9.882 207
Accessories vacuum gauge, Pirani, VAP 5
VACUUBRAND
Type
Vacuum gauge head VSP 5 with KF/DN 10 DN8 fittings for VAP 5
Cable leads for VAP 5
2
PK
Cat. No.
1
1
9.882 232
9.882 233
2 Automatic Vacuum Controller CVC 3000
Extremely versatile vacuum controller for the laboratory.
VACUUBRAND
No configuration required. Just connect and the CVC 3000 will identify all apparatus with VACUU-BUS™ VACUUBRAND
pumps, vacuum valves, cooling water valves, external sensors, etc. Intuitive menu guidance via graphics display with
analogue and digital vacuum readout. Demand-related control of process vacuum, cooling water and venting. Integral
sensor made of highly resistant, alumina ceramic provides reliable absolute-pressure measurement. Boiling-point
monitoring facility for evaporations*. No more searching for data or data input. Preset for many common vacuum
applications, e.g. vacuum ovens, filtration.
Specifications:
Measuring range:
Vacuum control range:
Uncertainty of measurement:
Temperature coefficient:
Control interface:
Control connections:
Supply requirements (mains
adapter):
Dimensions (desktop unit, L x W x
H):
Weight (without mains adapter):
1080 to 0.1mbar (810 to 0.1 Torr)
1060 to <0.1mbar (795 to 1 Torr) (depending on vacuum pump)
< ±1mbar (0.75 Torr) (after calibration)
< ±0.07mbar/K (< ±0.05 Torr/K)
Digital VACUU-BUS™
1 socket for supply/Vario pump
2 expandable sockets for external sensors/valves
100-240V 50/60Hz a.c. 1ph.
138 x 124 x 115mm
0.44kg
Description
CVC 3000
DKD calibration at initial delivery
Package CVC 3000 + vacuuBUS VV-B 6C valve
* in conjunction with VACUUBRAND Vario NT pumps
994
E & OE.
PK
Cat. No.
1
1
1
9.882 861
9.882 221
9.882 860
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Measurement, control devices
NEW!
1 2 Automatic Vacuum Controller CVC 3000 Package with integrated
chemistry valve
Extremely versatile vacuum controller for the laboratory.
1
VACUUBRAND
No configuration required. Just connect and the CVC 3000 will identify all apparatus with VACUU-BUS™ Vacuubrand
pumps, vacuum valves, cooling water valves, external sensors, etc. Intuitive menu guidance via graphics display with
analogue and digital vacuum readout. Load-sensitive control of process vacuum, cooling water and venting. Integral
sensor in highly resistant, alumina ceramic provides reliable absolute-pressure measurement. Two-step control for
rotary evaporators. Preset for many common vacuum applications, e.g. vacuum ovens, filtration.
Specifications:
Measuring range:
Vacuum control range:
Uncertainty of measurement:
Temperature coefficient:
Control interface:
Control connections:
Supply requirements (mains
adapter):
Dimensions (desktop unit, L x W x
H):
Weight (without mains adapter):
Vacuum connection:
Interface:
2
1080 to 0.1mbar (810 to 0.1 Torr)
1060 to <0.1 mbar (795 to 1 Torr) (depending on vacuum pump)
< ±1mbar (0.75 Torr) (after calibration)
< ±0.07mbar/K (< ±0.05 Torr/K)
Digital VACUU-BUS™
1 socket for supply/Vario pump
2 expandable sockets for external sensors/valves
100-240V 50/60Hz a.c. 1ph.
CEE/CH/UK/US/AUS
162 x 138 x 114mm
1kg
2 x hose nozzle SW DN 6/10
Connections for integrated venting valve DN 4 to 5mm
RS232C
Description
Package CVC 3000 + valve VV-B 6C + mounting bracket + 2 x tubing nozzle connectors + venting valve
3 Accessories for Automatic Vacuum Controller CVC 3000
PK
Cat. No.
1
9.882 859
3
VACUUBRAND
Description
Solenoid inline valve VV-B 6C
External sensor VSK 3000
Cooling water valve VKW-B
Air admittance valve VBM-B
Extension cable for VACUU-BUS, 2m
Y-adapter for VACUU-BUS™
Liquid level sensor for VACUUBRAND 500ml catchpot
PK
Cat. No.
1
1
1
1
1
1
1
9.882 851
9.882 850
9.882 852
9.882 849
9.882 853
9.882 854
9.882 848
NEW!
Accessories for DCP 3000
VACUUBRAND
Type
External sensor VSK 3000
Air admittance valve VBM-B
Extension cable for Vacuu·BUS, 2m
Y-adapter for VACUU-BUS™
Vacuu-Control software
cable RS 232 C, 9-pole, Sub-D
External sensor VSP 3000
External sensor MPT 100
Cable for MPT 100
PK
Cat. No.
1
1
1
1
1
1
1
1
1
9.882 850
9.882 849
9.882 853
9.882 854
9.882 866
9.882 867
6.238 192
9.882 869
9.882 870
We can supply this
manufactorer’s
whole
product range !
E & OE.
995
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Aspiration systems
1
NEW!
1 Water jet pumps
Plastibrand®. PP.
BRAND
With constant ultimate vacuum, high suction flow rate and very low water consumption.
Can be connected to mains water system in a number of different ways using the adapter supplied and reducing
adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical
resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve
increases safety.
Comprises:
Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external
diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.
Performance characteristics at 4.5 bar water supply pressure at 12°C
Water consumption:
190L/hr.
Ultimate vacuum:
16 mbar
Flow rate at atmospheric pressure:
400L/hr. free air
Type
Reducing adapter R 3/8" for water jet filter pump
Reducing adapter M 22x1 for water jet filter pump (thread for screen tap)
Water jet pump
2
PK
Cat. No.
1
1
1
7.020 037
7.020 038
9.303 125
2 Water jet pump
Bistabil. DURAN®. Robust glass design. Connection to the mains water supply is via GL
18 external thread, vacuum connection via an 11mm diameter nozzle.
BRAND
Accessory mains water connector with GL 18 thread adapter with R ¾" PP sleeve nut and nitrile rubber (NBR) seals (15
x 3mm and 10 x 3mm O-rings).
Output data at 4.5 bar (absolute) water flow pressure and 12°C water
temperature.
Water consumption:
approx. 340L/hr.
Ultimate pressure:
16mbar
Flow rate at atmospheric pressure:
950L/hr. free air
Type
Water jet pump
Thread adapter
PK
Cat. No.
1
1
9.303 033
9.303 035
PK
Cat. No.
1
1
9.303 000
9.303 001
Water jet pump
Nickel-plated brass, non-return valve, adapter for rapid action hose.
Description
Water jet pump
Rapid action hose for water jet pump
We can supply this
manufactorer’s
whole
product range !
996
E & OE.
9. Vacuum technology
GENERAL CATALOGUE EDITION 17
Vacuum pumps/Aspiration systems
1 QuikSip™ BT-aspirator
1
This handy, manual bottle-top suction device is ideal for removing supernatant liquids
e.g. culture media, from dishes, tissue culture flasks and multiwell plates or from
residues after precipitation and centrifugation of proteins and nucleic acids.
BRAND
Features:
- Safe removal of supernatants
- Works without a vacuum pump
- Fingertip vacuum control using using cell-cultureTM unit
- Suitable for use with disposable pipette tips, micropipettes and Pasteur pipettes
- Adapter and suction tube for the cell-culture TM unit are autoclavable (dispensing cartridge and pump unit are not
autoclavable)
QuikSip™ is supplied with single channel pipetting unit for the removal of liquids from reaction vessels, test tubes, etc.
An accessory 8-channel manifold is available for removing liquids from microtitre plates.
Items supplied: 1 QuikSip™ BT aspirator, 1 cell-culture™, 1 operating manual, 1 spare dispensing cartridge, 2 PP bottletop adapters (GL 45/32 and GL 45/S40)
8 channel PP manifold. Autoclavable (121°C).
Type
QuikSip™ BT-Aspirator
8-channel aspiration manifold
PK
Cat. No.
1
1
9.777 015
9.777 016
2 EcoVac safety suction systems
2
For safe and comfortable removal of liquid excess. EcoVac increases the safety standard,
schuett-biotec
when working with infectious material. Completely autoclavable. Screw-cap of safety
bottle incl. 2 self-locking fittings. When tubing is removed, they close automatically and the bottle will be sealed
hermetically. Safety bottle made of impact and chemical-resistant polypropylene, with screw-cap incl. 2 self-locking
fittings, ventilation system, safety filter and 5m of silicone tubing.
EcoVac vacuum pump (optional):
Quiet with low vibration. Throughput 4L/min., 300mbar ult. vacuum, with illuminated on/off switch and 1m connecting
cable. Overall dimensions: 80mm x 60mm x 160mm (W x H x D). 230V 50/60Hz.
Foot-switch (optional):
For short-time repeated use of EcoVac.
Supplied with: Safety bottle (breakproof and chemically stable) with screw cap and 2 self- locking fittings, silicone
tubing 3.5m (autoclavable), safety filter, 2 angled fittings for tubing connection, 1 aeration insert.
Type
Capacity
L
2
4
EcoVac 2 System
EcoVac 4 System
Vacuum pump, incl. 1m cable
Foot switch
Safety filter
Spare 2L bottle incl. Screw-cap with 2 self-locking fittings
Spare 4L bottle incl. Screw-cap with 2 self-locking fittings
E & OE.
PK
Cat. No.
1
1
1
1
2
1
1
9.777 000
9.777 001
9.777 005
9.777 008
9.777 009
9.777 007
9.777 010
997
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement