Product Catalog - Canal Alarm Devices, Inc.

Product Catalog - Canal Alarm Devices, Inc.
Securing & Simplifying Life
Product Catalog
Premium Security and Automation Products
INNOVATIVE SECURITY
ELK Products, Inc
PO Box 100
Hildebran, NC 28637
Phone: (800) 797-9355
Fax: (828) 397-4415
www.elkproducts.com
M1 Security & Automation Controls
Pg.4
Physical Address:
3266 US Highway 70
Connelly Springs, NC 28612
SALES
[email protected]
CUSTOMER SERVICE
[email protected]
Sales & Customer Service Hours:
8:00am - 5:00pm EST Mon. - Fri.
TECHNICAL SUPPORT
(800) 797-9355
[email protected]
[email protected]
Se habla Español
Tech Support Hours:
8:00am - 6:45pm EST Mon. - Thurs.
8:00am - 5:00pm EST Friday
FLEXIBLE AND INTEGRATION FRIENDLY
Elk's M1 Controls incorporate security, fire, door entry control,
plus energy & task management to provide total control of home
or business. Easily integrating with products of industry partner
manufacturers, M1 controls offer a truly customized solution.
These IP accessible systems provide simple, yet powerful
on-site and remote user interfaces, giving the consumer full
control anytime, from anywhere.
Two-Way Wireless Technology
Pg.16
See why ELK’s Two-Way Wireless products
for M1 Controls are more secure than
typical wireless and check out our new
recessed door contacts!
ELK Everyday Essentials
Batteries
Structured Wiring
Connect with us online!
Pg.38
Pg.26
AND AUTOMATION SOLUTIONS
WE’VE GOT THE POWER!
ELK’s new power supply and battery charger kits feature a master
power switch and low battery supervision with deep discharge cutoff
protection. These power supply kits provide reliable power for a variety
of applications including alarm sounders, access control, cameras, water
shutoff valves and more!
NEW! Power Supply Kits
Pg.34
THE CLARITY OF VOICE
ELK’s voice siren drivers eliminate confusion with concise voice messages
in english and spanish combined with conventional siren and temporal
coded tones for burglary, fire, and carbon monoxide.
Voice Siren Driver
with Temporal Codes
Pg.33
BEAUTIFULLY SIMPLE.
ELK’s stainless steel enclosed sirens and speakers naturally reflect the
mouting surface, blending easily into the surroundings. With the rugged,
compact design and rust free stainless steel construction, these sirens and
speakers are perfect for any installation including harsh environments.
Stainless Steel Enclosed Sirens & Speakers Pg.29
Relays
Surge Suppressors
Pg.39
Pg.41
B Connectors
Pg.43
Our Mission
To provide cost-effective and innovative
security and automation solutions to
the professional trade with unsurpassed
product quality and technical support.
What We Do
ELK is a leading designer and manufacturer of customized home and business security, energy management and
convenience solutions. For over 20 years, we have created a trusted brand with simple, yet innovative products that
have now become industry standards. Our customer service is world class and we stand behind the products we
sell with industry leading technical support and warranty.
We are focused on creating products that secure and simplify life. In the rapidly changing security and automation
market, ELK offers an integrated approach that delivers full featured and personalized solutions for security,
lighting, environmental control, energy conservation, access control, and management of just about any electrical
feature in the home or business.
Let the ELK team help create a personalized solution to meet your customer’s lifestyle, budget, and tastes with
reliable, simple to use, state of the art products.
Want to learn more or need assistance?
WEBINAR TRAINING SERIES
•
M1 Basic Training
- Provides an introduction to system layout and programming for those who are new
to the M1 Control Family
•
M1 - Advanced Topics
- Dive deeper into system setup for specific applications and integration with our
various partner manufacturers
View Our Monthly Webinar Schedule: www.elkproducts.com/webinars
TRAINING VIDEOS ON YOUTUBE
OFFSITE TRAINING COURSES
Find how-to videos, product demos,
recorded webinars and more on our
YouTube channel.
Attend a training course in your area.
Course topics vary from system basics to
integration with partners.
Subscribe today to stay up-to-date on all things ELK!
www.youtube.com/elkproductsvideo
View our offsite course descriptions and schedule:
www.elkproducts.com/training
ONLINE SUPPORT TOOLS
Find product manuals, hookup diagrams, application notes and other support tools on our website:
www.elkproducts.com/support
Table of Contents
Security & Automation Controls
M1Gold & M1EZ8 Controls ...................................................................................................................................................................... 4-9
Remote Control Options.............................................................................................................................................................................10
Ethernet Interface & Connectivity Accessories...................................................................................................................................11
Keypads..................................................................................................................................................................................................... 12-14
Access Control................................................................................................................................................................................................15
Two-Way Wireless Product Family................................................................................................................................................. 16-19
Other Wireless Options...............................................................................................................................................................................19
Input & Output Expansion.........................................................................................................................................................................20
Data Bus Hubs................................................................................................................................................................................................20
Interfaces for Integration..................................................................................................................................................................... 21-22
Supervised Power Supply for M1.............................................................................................................................................................22
Zone Temperature Sensors........................................................................................................................................................................22
Two-Way Listen-In & Other Accessories................................................................................................................................................23
M1 System Design Guide...........................................................................................................................................................................24
Tips for Mounting in ELK Structured Wiring Enclosures..................................................................................................................25
Structured Wiring
............................................................................................... 26-27
Automation Accessories
......................................................................................................28
Sirens/Speakers
Stainless Steel Enclosed Speakers/Sirens.............................................................................................................................................29
Strobe Lights...................................................................................................................................................................................................29
Echo™ Paintable Speakers/Sirens............................................................................................................................................................30
Interior Speakers/Sirens..............................................................................................................................................................................30
Multi-Purpose Speakers/Sirens................................................................................................................................................................31
Siren, Voice, & Recordable Drivers
.............................................................................................. 32-33
Power
Power Supplies........................................................................................................................................................................................ 34-36
Transformers...................................................................................................................................................................................................37
Power Distribution Units............................................................................................................................................................................37
Batteries............................................................................................................................................................................................................38
Other Power Products.................................................................................................................................................................................39
Relays & Timers
............................................................................................... 39-40
Surge Suppressors
......................................................................................................41
Programmable Controls
.....................................................................................................42
Communication Accessories
......................................................................................................42
Universal Accessories
.....................................................................................................43
Index by Part Number
.............................................................................................. 44-45
www.elkproducts.com
Security and Automation Made Simple
The M1 Security and Automation Control System combines security,
energy management, and integrated control solutions to provide
comfort, convenience and simplicity.
Security and Safety
M1 gives you peace of mind with
comprehensive detection and
reporting capabilities to protect
what matters most. Easy system
expansion and support for wireless
sensors ensure M1 is the right fit
today and in the future.
6
Flexible and
Integration Friendly
Choose the system that uses smart
features like occupancy detection,
environmental conditions and
a built-in astronomical clock
to manage and control lights,
thermostats, water valves, garage
doors, gates and more.
Convenient Interfaces
With timely access to information
and simple, user-friendly interfaces,
M1 keeps you informed and in
control. It’s easy to access your
system from anywhere with your
favorite smart devices. No monthly
fees required!
M1 goes beyond basic security with enhanced features for
added safety and convenience.
• Receive event notifications on or off site with voice alerts,
keypad alerts, phone calls, emails and text messages
• Reduce false alarms with two-way voice alarm verification
• Easily turn on outside lights with a keyfob to create a safely lit
pathway from your car to your home
• Enhance security with integrated door locks
• Use lighting to create a “lived in” look while on vacation
M1 provides timely access to information and easy-to-use
interfaces to keep you informed and in control.
• Control your system from anywhere with a variety of software
and apps. No monthly fees required!
• Get the right keypads to meet your needs and match your decor
with options ranging from user friendly touch screens to discrete
arming stations
• Receive text or email notifications of important system events
right to your phone.
M1 energy management solutions help you reduce energy
costs without sacrificing comfort.
• Automatically turn lights off in unoccupied rooms
• Use lighting scenes and dimmed settings to reduce energy
consumption
• Automatically control thermostats based on time of day,
occupancy, and/or ambient conditions
• Turn off electric water heater while away
• Conserve water with scheduled control of sprinklers
With M1, lighting control goes beyond energy savings to
improve safety and enhance the appearance of your home.
• Built-in astronomical clock provides intelligent lighting control
based on sunrise/sunset
• When an alarm is activated, lights turn on or flash
• Lights turn on after dark when motion is detected
• Start your day by awakening to soft lighting that progressively
brightens your room
• Use a simple key press at bedtime to turn off all the lights.
Relax knowing M1 is managing your home and providing the
solutions you need for an enjoyable lifestyle.
• Set back thermostats, adjust lighting and turn off water for
safety and efficiency while you’re away
• Keep watch over elderly loved ones through activity monitoring
• Be alerted to someone entering the pool area or driveway
• Know when system has been armed or disarmed by a caregiver,
grounds keeper, loved one, etc.
• Get alerts if the temperature in the wine cellar is too high or low.
7
M1
Flexible Security & Automation Solutions
M1 GOLD FEATURES:
• UL Listed - Residential Burglary/Fire, Home Health Care, Commercial Burglary
• Powerful “Whenever/And/Then” programming for automation, safety, and notification
• IP accessibility for remote programming, remote control, email notification, integration, etc.
• Central station reporting via digital dialer, IP or cellular communicators
• 2.5 Amp Heavy duty power supply with master power switch and low battery cutoff
CONTROL
Keypad Options
ELK-M1KPNAV
Navigator
Touch Screen Keypad
ELK-M1KP
LCD Keypad
ELK-M1KP2
LCD Keypad
ELK-M1KPB
LCD Keypad
ELK-M1KP3
LCD Keypad
ELK-M1KPAS
Arming Station
Remote Control
Control the M1 from:
• Smart Phones
• Tablets
• Web Browsers
• PCs
Internet
ELK-M1XEP
Ethernet Interface
Access Control
Door Contact Input
RTE Input
26-bit Wiegand Proximity
Reader or Access Keypad
ELK-M1PRC (Prox Card)
ELK-M1PRF (Prox Fob)
8
ELK-106055
Prox Reader
Relay Output to
Door Strike or Mag Lock
ELK-M1KAM
Single Door Access Module
Door/Gate Control for:
• Up To 16 Entry Points
• Up To 199 Users
M1
Flexible Security & Automation Solutions
EX PAND
Hardwired Input Expansion
Output Expansion
Control a variety of devices including:
Garage Doors
ELK-M1XIN
16 Zone Hardwired
Input Expander
Pumps/Valves
Sprinkler Systems
ELK-M1XOVR
Output Expander
Wireless Expansion Options
Two-Way Wireless
ELK-M1XRFTW
Transceiver for ELK
Two-Way Sensors
ELK-6022
Universal 3- Zone
Sensor
ELK-6010
Keyfob
ELK-6023(BR)
Recessed Door
Contact
Other Wireless Options
ELK-6011
Panic Button
ELK-6030(P)
PIR Motion
Sensor
ELK-6020(BR)
Slimline Door &
Window Sensor
ELK-6040
Glassbreak
Sensor
ELK-6021(BR)
Mini Window
Sensor
ELK-M1XRFEG
Wireless Receiver for
GE/ITI Format
One-Way Transmitters
ELK-6050
Sound All™
Smoke Detector
ELK-M1XRF2H
Wireless Receiver for
Honeywell 5800 Series
One-Way Transmitters
See wireless receiver specifications for information on compatible sensors.
AU TOMATE
Hardwired Thermostat Control
Lighting Control Options
ELK-M1PCSPIM
UPB Interface
For Pulseworx and
Simply Automated
ELK-M1XSP
Lighting Interface
For CentraLite and ALC
Lighting Systems
ELK-M1XEP
Ethernet Interface
For IP based lighting
systems from Insteon/
Universal Devices
ELK-M1XSP
Thermostat Interface
Allows M1 to control
hardwired thermostats
from Aprilaire, RCS,
Leviton and Carrier
Multi-Device Control Options
ELK-M1XSLZW
Leviton Z-Wave
Interface
Leviton
VRC0P-1LW
Allows M1 to control Leviton and
other Z-Wave devices including
lights, thermostats, and locks
ELK-M1XSLU
Lutron RadioRA 2
Interface
Lutron RadioRA 2
Main Repeater
Allows M1 to control Lutron
RadioRA 2 Devices including
lights, thermostats, and shades
ELK-M1XSLC
Lutron Caséta
Interface Kit
Lutron Caséta
Smartbridge Pro
Allows M1 to control Lutron
Caséta Devices including
lights and shades
9
M1 Controls & Accessories
M1 GOLD
System Packages
All M1 Gold system packages include the following items:
• M1 Gold Control Board, UL Listed
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable Interior Speaker
ELK-M1GSYS4STW
7
62158 16026 4
• ELK-952 Surge Protector
• ELK-RJSET Telco Jack & Cord
• ELK-M1BLOCKS Plug-in Terminal Blocks
M1 Gold Control Two-Way
Wireless Saver Kit
M1 Gold Control Kit with
Keypad and Enclosure
Additional items included with
this package:
Additional items included with
this package:
• ELK-M1XRFTW Two-Way
Wireless Transceiver
• ELK-6010 Two-Way Wireless
4 button Keyfob
• ELK-M1KP2 LCD Keypad
• ELK-SWB14 Enclosure
• ELK-M1KP2 LCD Keypad
• ELK-SWB14 Enclosure
ELK-M1GSYS4S
62158 56057 6
7
M1 Gold Control Kit with
Enclosure (No Keypad)
M1 Gold Control Kit with
Keypad and Enclosure
Additional items included with
this package:
Additional items included with
this package:
• ELK-SWB14 Enclosure
• ELK-M1KP LCD Keypad
• ELK-SWB14 Enclosure
ELK-M1GSYS3
ELK-M1GSYS4
7
ELK-M1GK
7
7
62158 56012 5
M1 Gold Control Kit with
Keypad (No Enclosure)
Additional items included with
this package:
Additional items included with
this package:
• ELK-M1KP LCD Keypad
• ELK-M1KP2 LCD Keypad
28” structured wiring box may be
ordered separately. Part # ELK-SWB28
ELK-M1GKS
7
M1 GOLD
28” structured wiring box may be
ordered separately. Part # ELK-SWB28
62158 55056 0
Other System Configurations
ELK-M1GCB
ELK-M1GOLD
7
62158 56000 2
Includes:
• M1 Gold Control Board
• ELK-SWB14 Enclosure
• ELK-M1BLOCKS Plug-in Terminal Blocks
• ELK-952 In-Line Telephone Surge Protector
10
62158 56011 8
M1 Gold Control Kit with
Keypad (No Enclosure)
62158 55039 3
M1 Gold Control Board in
SWB14 Metal Enclosure
Keypads may be ordered separately.
See Pages 7-9 for more information.
M1 Gold Control board only
(in clam shell case)
7
62158 56001 9
• For use in structured wiring enclosures, trim-outs on pre-wired
jobs, or as a spare or replacement board
• Includes ELK-952 In-Line Telephone Surge Protector
• Plug-in terminal blocks are not included,
order separately as ELK-M1BLOCKS
• Size: 8.375”W x 10” H x 2” D
M1EZ8
Economical Security & Automation Control
Key Differences Between M1 Gold and M1EZ8
M1Gold
Voice Capability
• Voice Announcements
• Built-in Telephone Remote Control
• Integrated Voice Dialer
M1EZ8
M1 Controls & Accessories
M1EZ8 offers an economical solution for installations not requiring the voice and telephone remote control
capability of the M1 Gold. Built on the same software architecture as M1 Gold, the possibilities for expansion,
networking with other systems, and option for programming and control over the internet make M1EZ8 an
exceptional value. The chart below outlines the key differences between the M1 Gold and M1EZ8.
No Voice Capability
16 On-board Input Zones, expandable to 208
8 On-board Input Zones, expandable to 200
13 On-board Outputs, expandable to 205
• 1 voice driver/siren
• 1 siren driver/voltage
• 1 form “C” relay
• 10 low current voltage (50 mA)
12 On-board Outputs, expandable to 204
• 1 siren driver/voltage
• 1 form C relay
• 10 low current voltage (10 mA)
On-Board Serial Port
Serial Port available as ELK-M1EZ8MSI
Main Serial Port Interface (optional)
Plug-In Terminals
Non-removable screw terminals
4 Power Terminals - 3 Auxiliary, 1 Switched Smoke
2 Power Terminals, 1 Auxiliary, 1 Switched Smoke
Master Power Switch and Low Battery Disconnect
Master Power Switch and Low Battery Disconnect switch
available as ELK-965 (optional)
Zone Voltage Display and Volt/Current Meter
Zone Voltage Display and Voltmeter
Two Way Listen-In Capability:
• For Central Station Alarm Verification
• User activated through telephone remote control
No Two Way Listen-In Capability
M1EZ8 Control Board Only
ELK-M1EZ8CB
• For use in structured wiring enclosures, trim-outs on pre-wired jobs, or as a
• spare or replacement board
• Can be mounted directly to almost any surface
• Mounting Hardware Included
• Size: 6.5”W x 6.75” H x 1.5” D
7
62158 55041 6
7
62158 55042 3
7
62158 55059 1
M1EZ8 Control Kit With Enclosure
This “ready to install” value package includes:
ELK-M1EZ8KB
• M1EZ8 Control Board
• ELK-M1KP LCD Keypad
• ELK-UB12 Metal Enclosure
• ELK-1250 5Ah Battery
• ELK-RJSET Telco Jack & Cord
• ELK-SP35 Interior Speaker
• ELK-TRG1640 AC Transformer
M1EZ8 Control Kit With Enclosure
This “ready to install” value package includes:
ELK-M1EZ8KB
• M1EZ8 Control Board
• ELK-M1KP2 LCD Keypad
• ELK-UB12 Metal Enclosure
• ELK-1250 5Ah Battery
• ELK-RJSET Telco Jack & Cord
• ELK-SP35 Interior Speaker
• ELK-TRG1640 AC Transformer
11
M1 Controls & Accessories
Remote Control Options for M1 Controls
M1ToGo for Windows®
Remotely access the M1 system from anywhere in the world with M1ToGo!
This free software provides users computer-based, internet remote access
to their M1 system with a PC. The secured Windows based platform allows
users full access to their security system along with lighting and energy
management, door/gate access and any other systems connected and
controlled through the M1. This software can be installed on a USB flash
drive for portability.
ü
ü
ü
ü
Convenient
Portable
Secure
FREE Download!
With M1ToGo you can:
•
•
•
•
•
•
•
•
•
•
Arm & disarm security system
View zone status and quickly bypass zones
Activate keypad panic/function keys
View and save event history log
Turn chime on/off, change chime mode
Control and view current status of lights and outputs
View current temperature/settings and control thermostats
View current temperature of sensors/keypads
Activate automation tasks (macros)
View and change custom setting values
Other Features & Benefits:
• Configuration is quick and easy
• Connection to M1 utilizes secure, encrypted port
• Multiple profiles provide quick access for multi-site users and
eliminates the need to remember IP addresses or URLs
• FREE Download! Try it today!
Control is Always at Your Fingertips
with these apps and services from our M1 Partners
eKeypad
M1 Touch Pro
Connect ONE
Apps for iPhone/iPad
App for Android Devices
Cloud based services for
any web-enabled device
Learn more about these remote control options at
www.elkproducts.com/m1-remote-control
12
Ethernet (IP) Interface for M1 Controls
M1 Controls & Accessories
The ELK-M1XEP Ethernet interface allow M1 controls to be connected
to a LAN (network) for programming, monitoring, and remote control.
It provides a secure encrypted connection with password protection
for remote software and apps with no monthly fees required! This
interface also supports cloud-based remote services. The IP monitoring
and reporting capability provides a great alternative to standard phone
lines. It also features email and text notification to keep you informed of
important system events.
•
•
•
•
•
•
•
•
•
•
•
•
Secure connection with password protection and SSL/TLS encryption
Event notification via e-mail (SMTP)
Internet monitoring and reporting capability
Supports synchronizing the M1/EZ8’s clock with NTP(stratum-2) time server
Supports automatic updates to Dynamic DNS providers (DynDNS protocol)
Connects to M1 control via RS232 serial port
LED indicators for Power, Link, and Data
Flash Memory for firmware updating
Operating Voltage: 12VDC Regulated
Current Draw: Approximately 300mA
Size: Housing - 4.25” x 6.375” x 2.125” ; Board - 2.25” x 3.95”
Includes ELK-P1216 Switching Power Supply and Serial Cable
ELK-M1XEP
7
62158 55016 4
Use ELK-SWG Circuit Board
Glides to mount M1XEP in ELK
Structured Wiring Enclosures
Connectivity Accessories
Main Serial Port for M1EZ8
The main serial interface for ELK-M1EZ8, required for interfacing M1EZ8 with a PC for upload/download.
Baud rate programmable up to 115,200 baud.
• Required when adding the M1XEP
ELK-M1EZ8MSI
Ethernet Interface to M1EZ8
• Housing Size: 4.375" x 3" x 1.25"
• Board Size: 3.375" x 2.25"
7
62158 55034 8
Serial Cable to convert USB to RS-232
This special cable is required for the ELK-RP software to connect with the main
serial port of M1 Controls when the computer does not provide a conventional
RS-232 9 pin port.
ELK-USB232
• Male USB to Male DB9
• Speed: USB 2.0
7
62158 55027 0
7
62158 55060 7
• Cable Length: 6'
• Includes CD with Device Drivers
Serial Ribbon Cable
This serial ribbon cable is used to connect the M1 Controls main serial port to
the M1XEP. Included with ELK-M1XEP.
ELK-W040A
• Compact design means cable will not
interfere with the enclosure door
• DB9F to DB9M
• Approx. 17" long
13
M1 Controls & Accessories
Keypads for M1 Controls
Navigator Touchscreen Keypad
Navigator is a stylish, touchscreen keypad for use with M1 Control
Systems. It features a touch sensitive, 3.5” LCD color display with
colorful icons and text for easy control of entire system. It connects
to the M1 panel via the RS-485 data bus, making it simple for new
or retrofit installations. Not only is Navigator stylish, it provides
simplified, quick keypad programming. Navigator comes with a
designer white bezel, but the optional replacement bezels allow
easy conversion to black or silver.
•
•
•
•
•
•
•
•
•
•
•
•
Hi-Contrast LCD Touchscreen Display
Six (6) Programmable Function Keys
Unique “Menu” Navigation
Information screen displays installer contact details
Built-in Piezo Sounder with adjustable volume and pitch
One (1) Supervised Zone Input
One (1) “Switched Positive” Voltage Output
Optional raceway back box for solid wall mount
Fits into horizontally positioned single gang box
Connection: 6 Pin Plug-in “Flying Lead” Cable
Operating Voltage: 13.8 VDC
Current draw: ~30mA Idle (low backlight, sounder silent)
~ 55 mA fully active (max backlight and sounder active)
• Dimensions: 4.25”W x 3.38”H x .59”D
Surface Mount Back Box
• Use for mounting the M1KPNAV
on concrete/block (non-hollow)
surface or with wire raceway
ELK-M1BBKN
7
Black Bezels
• Color Change for M1KPNAV
• Package of 2
ELK-M1BZBKN
62158 55078 2
7
62158 55079 9
Arming Station
ELK-M1KPNAV
7
62158 55077 5
Silver Bezels
• Color Change for M1KPNAV
• Package of 2
ELK-M1BZSKN
7
62158 55080 5
Small, economical, arm/disarm station for M1 Controls fits into single gang box and utilizes a standard
decorator style faceplate (not included). Displays basic system status with 3 LEDs: Green “Ready”, Yellow
“Trouble”, and Red “Armed”. The 12 button keypad is backlit with blue LEDs and has quick arm keys
for “Exit” and “Stay”. The M1KPAS also provides access to six (6) programmable function operations by
pressing the “F” (Function) key followed by one of the keys (1 thru 6).
ELK-M1KPAS
7
14
62158 55054 6
• Blue Backlit Keys
• Instant Activation of 6 Tasks
• Built-in Piezo Sounder
• Quick Arm Exit & Stay Keys
• LED Status Indication
• Connection: 4 Pin Plug-in
“Flying Lead” Connector (Included)
• Color: White
• Operating Voltage: 13.8VDC
• Size: 1.81” x 2.75” x 1.13”
LCD KEYPADS
• Input for One Supervised Zone
• One 12VDC, 50 mA Programmable “Switched Positive” Output
• Exit, Stay, Chime, and Bypass Keys
• Displays system diagnostics and settings
• Connection: 6 Pin Plug-in "Flying Lead" Connector (included)
• Operating Voltage: 13.8VDC
ELK-M1KP
• Green LCD display with large characters for improved readability
• Six (6) programmable function keys
• Adjustable volume for tones/chime
• Accepts Internal Plug-in Proximity Reader (ELK-M1PR)
• Accepts “External” 26 bit Wiegand Prox Reader using ELK-W035A wiring harness
• Built-in Temperature Sensor
• Programmable display of time, date, and/or temperature
• Fold down door features magnetic closure (can be removed if desired)
• Current Draw: 40-50mA Idle (low backlight, sound silent) 160mA fully active
• Color: Glacier White
• Size: 6.875” x 5.25” x 1.375”
7
62158 55003 4
7
62158 55004 1
7
62158 55047 8
7
62158 55061 4
M1 Controls & Accessories
Our LCD keypads for M1 controls feature a 32 character, backlit display with adjustable intensity. Programmable function
(“F”) keys can contact emergency services or perform tasks; such as, controlling lights, watering the lawn, closing or
opening the garage door, etc. The ELK menu navigation keys easily guide you through the full list of automation tasks,
programming, systems diagnostics, and more. These LCD keypads are compatible with 26 bit Wiegand proximity readers,
allowing cards or fobs to be used for arming, disarming, or door lock control, etc.
ELK-M1KPB
• High contrast blue LCD display with large characters for improved readability
• Six (6) programmable function keys
• Adjustable volume for tones/chime
• Accepts Internal Plug-in Proximity Reader (ELK-M1PR)
• Accepts “External” 26 bit Wiegand Prox Reader using ELK-W035A wiring harness
• Built-in Temperature Sensor
• Programmable display of time, date, and/or temperature
• Fold down door features magnetic closure (can be removed if desired)
• Current Draw: 40-50mA Idle (low backlight, sound silent) 160mA fully active
• Color: Glacier White
• Size: 6.875” x 5.25” x 1.375”
ELK-M1KP2
• High contrast blue/white LCD display
• Four (4) Programmable Function Keys
• Accepts “External” 26 bit Wiegand Prox Reader using ELK-W039A wiring harness
• Surface mounts to a standard 1 or 2 gang electrical box
• Programmable display of time & date
• Current Draw: ~30 mA Idle (low backlight, sounder silent) ~85 mA fully active
• Color: White
• Size: 4.658” x 5.5” x .95” (.375” D with recess mount)
• Optional Recess Back Box Kit Available (ELK-M1BBK2); size: 4.312” x 5.375” x 1”
ELK-M1KP3
• High contrast blue/white LCD display
• Four (4) Programmable Function Keys
• Hinged door over the keys
• Accepts “External” 26 bit Wiegand Prox Reader using ELK-W039A wiring harness
• Surface mount only without electrical box
• Programmable display of time & date
• Current Draw: ~30 mA Idle (low backlight, sounder silent) ~85 mA fully active
• Color: White
• Size: 3.97” x 5.425” x 1.19”
15
KEYPAD FEATURE COMPARISON
M1 Controls & Accessories
M1KPNAV
M1KP
M1KPB
M1KP2
M1KP3
M1KPAS
Physical
Dimensions
4.25” x 3.4” x .6”
6.9” x 5.25” x 1.4”
6.9” x 5.25” x 1.4”
4.7” x 5.5” x 1”
4” x 5.5” x 1.2”
1.8” x 2.75” x 1.1”
Door Cover
✖ No
✔ Yes
✔ Yes
✖ No
✔ Yes
✖ No
Zone Input
✔ Yes (1)
✔ Yes (1)
✔ Yes (1)
✔ Yes (1)
✔ Yes (1)
✖ No
Programmable ✔ Yes (1)
Output
✔ Yes (1)
✔ Yes (1)
✔ Yes (1)
✔ Yes (1)
✖ No
Optional
Proximity
Reader
✔ Yes
✔ Yes
✔ Yes- External
✔ Yes- External
✖ No
Internal &
External
Internal & External
Only
✖ No
Only
Internal Temp
Sensor
✖ No
✔ Yes
✔ Yes
✖ No
✖ No
✖ No
Function “F”
Keys
6
6
6
4
4
6- Press “F” Key,
then 1-6
Adjustable Key ✔ Yes
Beep Volume
✔ Yes
✔ Yes
✖ No
✖ No
✖ No
Adjustable Key ✔ Yes
Beep Tone
✔ Yes
✔ Yes
✔ Yes
✔ Yes
✖ No
LCD Display
Full Color, Touch Green
Sensitive
Blue
Blue
Blue
N/A
Key Backlight
Color
N/A
Amber
Amber
Blue
Blue
Blue
Mounting
Options
Surface Mount
Only
Surface Mount
Only
Surface Mount
Only
Surface or Flush*
Mount (*see M1BBK2)
Surface Mount
Only
Mounts in Std.
Electrical Box
KEYPAD ACCESSORIES
Recess Back Box for M1KP2
The M1BBK2 is an optional back box kit that allows the ELK-M1KP2 keypad to be
flush (recess) mounted.
ELK-M1BBK2
• Used in place of standard surface
mount back box
• Size: 4.312” W x 5.375” H x 1” D
7
62158 55048 5
7
62158 55072 0
7
62158 55029 4
7
62158 55051 5
Keypad Conduit Wall Box
The M1KCWB is a two-piece, surface mount, metal wall box used for surface
mounting a keypad in a location that does not permit running or concealing the
wiring within the structure’s walls.
ELK-M1KCWB
• Permits mounting of the ELK-M1KP
or ELK-M1KP2 Keypad back plate
• 1/2” and 3/4” electrical conduit
knockouts on 3 sides and back
M1KP & M1KPB Proximity Reader Wiring Harness
This 5-pin cable is used to connect a 26 bit Wiegand reader (such as the
ELK-106055) to an M1KP or M1KPB keypad
ELK-W035A
• Color Coded
• Pre-stripped wire ends
• Keyed connector
• 18 Gauge Wire
• Wire length: 18"
M1KP2 & M1KP3 Proximity Reader Wiring Harness
This two pin cable is used to connect a 26 bit Wiegand reader (such as the
ELK-106055) to the M1KP2 or M1KP3 keypad
ELK-W039A
16
• Color Coded
• Pre-stripped wire ends
• Keyed connector
• 22 Gauge Wire
• Wire Length: 12”
Access Control
A single door access interface module for use with M1 Controls. It installs in place of an M1 Keypad and
operates from the RS-485 4-Wire Keypad Data Bus.
ELK-M1KAM
7
62158 55052 2
• Input for a standard 26 bit Wiegand Reader
• Input for a Dallas iButton Reader
• (3)12VDC Outputs for Door Held Open Alarm(50mA), Ready To Arm, and System Armed
indications (10mA)
• (2)Supervised Inputs for RTE (Request To Exit)
Button/Device and Door Status Sensor
• Four selectable Time settings for
"Request to Exit" and "Door Held Open"
• Heavy Duty Form “C” Relay Contacts for
Switching Door Strike Power
• Connections: Plug-In Screw Terminals,
16 Position
• Operating Voltage: 13.8VDC
• Current Draw: Less than 30 mA with minimum
activity, 44 mA fully active
• Housing Dimensions: 4.25" x 6.375" x 2.125"
• Circuit Board Dimensions: 3.95" x 2.875" x .95"
• Hardware Watchdog Circuit
M1 Controls & Accessories
M1 Single Door Access Module
Keypad Plug-in Proximity Reader
Plugs into the connector inside the ELK-M1KP or ELK-M1KPB keypad.* Allows a
proximity card or fob to be used to quickly arm, disarm, operate a door strike, etc.
• Reader format: 26 bit Wiegand
• Read Distance: ~3/8"
• 5 pin plug-in connector
ELK-M1PR
• Operating voltage: 5VDC from keypad
• Current Draw: ~20mA
7
62158 55005 8
7
62158 55044 7
*Will not fit other keypads- see ELK-106055
Requires M1PRC cards or M1PRF fobs
Exterior Proximity Reader
Allows a proximity card or fob to be used with M1 Controls to quickly arm, disarm,
operate a door strike, etc.
• Weatherproof - suitable for
• Connects to any M1KP(B) Keypad
with ELK-W035A - use ELK-W039A
outdoor installation
for M1KP2 & M1KP3 Keypads
• Size: 3 1/8” H x 1 7/8”W x 1”D
• Can be used on any system that is
• Color: Black
26 bit Wiegand compatible
• Operating Voltage: 12VDC
• Current draw: 50mA
ELK-106055
Requires M1PRC cards or M1PRF fobs
M1 Proximity
“Clam Shell” Cards
ELK-M1PRC
7
62158 55006 5
M1 Proximity Key Fobs
For use with the add-on proximity
readers: ELK-M1PR for the
ELK-M1KP keypad or ELK-106055
exterior reader.
For use with the add-on proximity
readers: ELK-M1PR for the
ELK-M1KP keypad or ELK-106055
exterior reader.
• Comes in packs of (10) ten
• Credit Card Size
• Color: Off white
• Size: 3.375” x 2.125” x .0625”
ELK-M1PRF
7
62158 55007 2
• Comes in packs of (10) ten
• Attaches to key chain
• Color: Black
• Size: 2.125” x 1.3125” x .25”
iButton™ Reader Probe & Plate Only
• For high security access control,
simple on/off switching, password
authentication, etc.
• Compatible with ELK-M1KAM
• Use ELK-MA101 iButton™ Touchkeys
7
62158 50110 4
7
62158 50101 2
ELK-MA110
iButton™ Touchkeys
ELK-MA101
• Electronic key with unique 48-bit
serial number
• For access control, on/off switching,
password authentication, etc.
• 10 pieces
• Required with ELK-MA110
17
M1 Controls & Accessories
Two-Way Wireless for M1 Controls
Experience ELK’s Two-Way Wireless Technology for M1 Controls, with advanced features designed
to ensure reliability, simplify installation and provide innovative security enhancements.
All signals are
acknowledged for
reliable operation
Status LEDs provide
system information and
installation confidence
Uses cutting-edge
technology to defend
against interference,
hacking & jamming
900 MHz frequency
hopping ensures signals
get through
UNIQUE PRODUCT FEATURES
18
Sound All™ Feature
Security & Convenience
Bright White LED
On-Demand
Status Inquiry
Activates the built-in sounders of all
enrolled smoke detectors in the event
of a fire alarm
Momentarily activated by motion
during walk test mode, flashes during
audible alarm, and programmable
activation through rules
Status inquiry button and LED
indicator provide arm, disarm, and
active alarm status
M1 Wireless Transceiver
• Allows up to 144 individual wireless zones
ELK-M1XRFTW
7
62158 16000 4
•
•
•
(sensors/points)
Operates from the 4 wire RS-485 Data Bus
Multiple receivers may be used with a single M1
or M1EZ8 control for redundancy and greater
coverage
Flash memory for firmware updates
• Operating Frequency: 902 Mhz to 928 Mhz
• Sensitivity: >105 dbm
• Operating Voltage: 12 Volts DC
• Current Draw: 25mA receiving,
85mA transmitting
• UL Listed
• Housing Dimensions: 6.75” x 4.69” x 1.13”
Two-Way Wireless Starter Kit
Includes:
• (1) M1XRFTW Two-Way Wireless Transceiver
• (2) ELK-6020 Slimline Door & Window Sensors
ELK-M1XRFTWKIT
7
M1 Controls & Accessories
Allows an ELK-M1 or ELK-M1EZ8 Control to accept Elk’s complete line of two-way wireless sensors.
• (2) ELK-6010 Four Button Keyfobs
• (1) ELK-6030P Motion Sensor with Pet Immunity
BIG SAVINGS!!
Add Two-Way Wireless to the M1 Control With This Money Saving Kit.
It’s Like Getting The Wireless Transceiver for FREE!
62158 16027 1
Four Button Keyfob
Provides 4 push buttons, LED feedback indicator and features Elk’s industry leading two-way technology.
From the remote it is possible to arm, disarm, check status, and trigger a panic alarm.
• Compatible with ELK-M1XRFTW Two-Way
ELK-6010
7
•
Wireless Transceiver
Status inquiry button & LED indicator provide
arm, disarm, and alarm memory status
• 902 Mhz - 928 Mhz frequency hopping
• Size: 1.37”W x 2.44”L x .52”D
• 3V CR2032 lithium battery
62158 16010 3
Single Button Panic Sensor
Features a single “press and hold” button and red LED feedback indicator. The typical application for this
sensor is for activating a panic or emergency alarm.
• Compatible with ELK-M1XRFTW Two-Way
ELK-6011
7
62158 16028 8
•
•
Wireless Transceiver
Red LED blinks to confirm the panic alarm has
been activated
Water resistant lanyard included
• 902 Mhz - 928 Mhz frequency hopping
• Size: 1.43”W x 1.9”L x .53”D
• Permanent, non-replaceable battery
PIR Motion Sensor
Ideal for residential and light commercial installations. Incorporates innovative features to ensure reliable
performance and convenience.
• Convenient keypad initiated walk test mode
• Industry First Security/Convenience Light with:
- Momentary motion activation during walk test
- Flashing during audible alarm activation
- Programmable “on” activation through M1 Rules
ELK-6030
7
• Two selectable sleep mode durations
ELK-6030P
PIR Motion Sensor
with Pet Immunity
62158 16023 3
Up to 40 lbs.
7
62158 16025 7
• Selectable coverage range and pulse count
• High quality dual element Pyroelectric sensor
• 902 Mhz - 928 Mhz frequency hopping
• Includes standard swivel mounting bracket
• 3V CR123A lithium batteries (2)
• Size: 2.8”W x 4.4”H x 1.9”D
ELK-603022
Deluxe 90° Swivel
Mounting Bracket
7
62158 16024 0
19
Slim Line Door & Window Sensor
M1 Controls & Accessories
Ideal for narrow jamb door and window applications and features Elk’s industry leading two-way
technology.
• Compatible with ELK-M1XRFTW Two-Way
•
•
Wireless Transceiver
One built-in reed switch
Front and back tamper option
ELK-6020
• Color: White
• 902 Mhz - 928 Mhz frequency hopping
• Maximum operating gap of reed: 1/2”
• 3.6V ER14250 lithium battery
• Size: .71”W x 3.4”L x .8”D
Magnet: .57”W x 1.5”L x .6”D
ELK-6020BR
62158 16020 2
7
• Color: Brown
7
62158 16039 4
7
62158 16040 0
Extra Magnets
ELK-SM20BR
ELK-SM20
• Color: White
• Pack of 10
62158 16035 6
7
• Color: Brown
• Pack of 10
Mini Window Sensor
Exceptionally thin wireless window sensor featuring Elk’s industry leading two-way technology.
• Perfect for double hung windows
• Compatible with ELK-M1XRFTW Two-Way
Wireless Transceiver
• One built-in reed switch
Magnet: .37”W x 2.3”L x .25”D
ELK-6021
• Color: White
• 902 Mhz - 928 Mhz frequency hopping
• Maximum operating gap of reed: 3/8”
• 3V CR2032 lithium battery
• Size: 1.1”W x 2.3”L x .25”D
ELK-6021BR
7
62158 16021 9
• Color: Brown
7
62158 16043 1
7
62158 16041 7
Extra Magnets
ELK-SM21BR
ELK-SM21
• Color: White
• Pack of 10
7
62158 16036 3
• Color: Brown
• Pack of 10
Recessed Door Sensor
The ultimate wireless security device for discriminating customers! Mounts into a 3/4” drilled hole in a
wooden door jamb and becomes nearly invisible once the door is closed.
• Designed for wood and vinyl doors
• Compatible with ELK-M1XRFTW Two-Way
Wireless Transceiver
• Built-in tamper switch
ELK-6023
• Color: White
• 902 Mhz - 928 Mhz frequency hopping
• Dimensions: .75”D x 2.5”L Mag: .75”D x .625”L
• Maximum Operating Gap: 3/4”
• 3.6V 1/2 AA size lithium battery
ELK-6023BR
7
62158 16031 8
• Color: Brown
7
62158 16038 7
7
62158 16042 4
Extra Magnets
ELK-SM23
• Color: White
• Pack of 10
ELK-SM23BR
7
62158 16037 0
• Color: Brown
• Pack of 10
Universal 3-Zone Sensor
3-in-1 sensor provides 1 wireless zone (built-in reed switch) and 2 hardwired zones (closed circuit zone
inputs) to be transmitted as 3 wireless zones. It features Elk’s industry leading two-way technology.
• Compatible with ELK-M1XRFTW Two-Way
ELK-6022
7
20
62158 16022 6
•
•
•
•
Wireless Transceiver
One built-in reed switch zone
Two zone inputs for external contacts
Front and back tamper option
Extra Magnets: Use ELK-SM20
• 902 Mhz - 928 Mhz frequency hopping
• Maximum operating gap of reed: 1/2”
• 3V CR123A lithium battery
• Size: 1.5”W x 3”L x .9”D
Magnet: .57”W x 1.5”L x .6”D
Glass Break Sensor
ELK-6040
62158 16030 1
7
• Pattern Recognition Technology™
• Omni-directional microphone, 360° Detection
• Operation Alarm LED - RED (viewable from front) • Detection Range: Detection Range: 20 ft. (6m)
• RF Acknowledge LED - Bi-Color (viewable with
• Min. Distance from Glass: 4 ft. (1.2m)
cover removed)
• 3V CR123A lithium battery
• Compatible with ELK-M1XRFTW Two-Way
Wireless Transceiver
M1 Controls & Accessories
Listens for actual patterns of breaking glass across the full audio band using Pattern Recognition
Technology™. The factory set recognition patterns make it possible to detect the difference between
breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Sound All™ Smoke Detector with Built-In Heat Sensor
Provides a two-way wireless solution with signal acknowledgement and rapid “rate-of-rise” temperature
detection. ELK’s M1 controls have the capability to activate the built-in sounders of all enrolled ELK-6050
smoke detectors in an event of a fire alarm.
ELK-6050
7
62158 16029 5
• Sound All™ feature activates built in sounder of
•
•
•
•
all enrolled detectors when fire alarm occurs
Photoelectric smoke detection
Rapid “rate-of-rise” temperature detection
Fixed temperature heat detection
Compatible with ELK-M1XRFTW Two-Way
Wireless Transceiver
• Sounder: 85 dBa at 10 ft. temporal pattern
• 902 Mhz - 928 Mhz frequency hopping
• Size: 5.6”W x 2.4”H
• 3V CR123A lithium batteries (2)
• UL Listed
Other Wireless Options for M1 Controls
M1 Wireless Receiver for GE Format Transmitters
Wireless (RF) receiver and input expander for use with M1 controls.
ELK-M1XRFEG
7
62158 55068 3
• Adds up to 144 individual wireless zones
(sensors/points)
• Compatible with GE Format
transmitters only (one-way)
• Operates from 4 wire data bus
• Multiple receivers may be connected to a
single M1 or M1EZ8 Control for redundancy
or greater coverage
• Flash memory for firmware updating
• Sensitivity: >105 dbm
• Operating Temperature: 0 to +120 degrees F
• Operating Voltage: 12 Volts DC
• Current Draw: 70mA
• Housing Dimensions: 6.75” x 4.69” x 1.13”
M1 Wireless Receiver for Honeywell 5800 Series Transmitters
Wireless (RF) receiver and input expander for use with M1 controls.
ELK-M1XRF2H
7
62158 55067 6
• Adds up to 144 individual wireless zones
(sensors/points)
• Compatible with Honeywell 5800 Series
transmitters only (one-way)
• Operates from the 4 wire data bus
• Multiple receivers may be connected to a
single M1 or M1EZ8 Control for redundancy
or greater coverage
• Flash memory for firmware updating
• Sensitivity: >105 dbm
• Operating Temperature: 0 to +120 degrees F
• Operating Voltage: 12 Volts DC
• Current Draw: 70mA
• Housing Dimensions:6.75” x 4.69” x 1.13”
21
M1 Controls & Accessories
Hardwired Input & Output Expansion
M1 16 Zone Input Expander
Adds 16 hardwired zones (with or without EOL resistor supervised) to the M1 Controls. Up to 12 may be
added, increasing the M1Gold to 208 and the M1EZ8 to 200 total zones (inputs)
ELK-M1XIN
7
• Operates from 4-wire data bus.
• Dip Switch address settings
• Flash Memory for firmware updating
• Plug-in terminal strips
• Status and diagnostic LED
• Operating Power Range: 9 to 14VDC
• Current Draw: 65mA
• Size: 6" x 3.25" x .75"
• Includes ELK-SWG for easy mounting in
ELK enclosure
62158 55017 1
M1 16 Output Expander, 8 Voltage & 8 Relays
Adds 16 outputs (8 voltage, 8 relays) to M1 Controls. Voltages can be used to trigger low current devices
(50 mA max. each). Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of
205 outputs. Option: convert 8 voltage outputs to relays using M1RB Relay Board.
ELK-M1XOVR
7
62158 55019 5
• Operates on the 4 wire Data Bus
• Up to 12 Output Expanders may be added
• DIP Switch address settings
• Flash Memory for Firmware Updating
• Includes 12 conductor "Flying Lead"
Wiring Harness
• Status LED with Diagnostic Display
• Relays: SPDT rated for 7A @ 28VDC,
10A @ 125 VAC
• Voltage Outputs: 12VDC @ 50mA each
• Operating Power Range: 9 to 14VDC
• Current Draw 65mA Nom., 330 mA Max.
• Size: 6" x 3.25" x .75"
• Includes ELK-SWG for easy mounting in
ELK enclosure
M1 Relay Board, Plug-in
Used to convert the voltage outputs of M1 Controls into SPDT relays.
ELK-M1RB
7
• Provides 8 Relay Outputs
• Plugs directly into M1 Controls or
ELK-M1XOVR
• Includes ELK-SWG for easy mounting
in ELK enclosure
• Relay Contact Ratings: 7A @ 28VDC,
10A @ 125VAC
• Wire harness length: 24”
• Current draw: 0mA Idle, 250mA Max.
• Size: 6” x 3.25” x. 75”
62158 55008 9
Data Bus Hubs
M1 Data Bus Hub
For easy connection of expanders & keypads. The M1DBH accepts up to 9 RJ45 equipped CAT5 or CAT6
cables, and series connects the data A & B lines so the data bus may be terminated properly.
ELK-M1DBH
7
62158 55002 7
• Designed for multiple home run cables
• Internally connects Data A & B lines from
previous device into next device out
• Multiple Hubs may be connected for expansion
• EOL Bus Termination done on-board with
included RJ-45 Terminator Plug
• Input Connectors: Elevator Screw Terminals
• Output Connections: RJ-45, 8-Pin Jacks
• Mounting Plate Size: 6.5" x 3" x .5"
• Circuit Board Size: 5" x 2.5" x .75”
• Easily snaps into Elk enclosure
M1 Data Bus Hub for Retrofit
Active RS-485 data bus hub for retrofitting older panels with multiple home run, 4 conductor keypad/
data wires with M1 Controls. The end of each cable is EOL terminated to insure proper operation
and supervision. Must be located at main control.
ELK-M1DBHR
7
22
62158 55037 9
• Splits main data bus into 4 managed
RS-485 branches.
• Each branch can have 2 parallel home run
cables for total of 8 home runs
• Works with standard 4 conductor home
run wiring
• Inputs: Elevator Screw Terminals (4 position)
• Output: Elevator Screw Terminals (4 position)
• Includes ELK-SWG for easy mounting
in ELK enclosure
• Circuit Board Size: 4.9" x 2.75" x .5”
Interfaces for Integration
The M1XSLZW is a specialized M1 serial expander for connecting M1 Controls to Z-Wave enabled devices
through a Leviton VRC0P-1LW Z-Wave Serial Interface. Z-Wave is a wireless, low power, “mesh” network
technology widely used for automating devices such as: lights, thermostats, electronic locks, etc. With the
automation and remote capabilities built into M1, it is possible to control Z-Wave devices from across the
room or across the world. Benefits include energy savings, convenience, and comfort.
ELK-M1XSLZW
7
• Activity/Status LED (Orange)
• Auto-Resetting Hardware Watchdog Circuit
• Addressable (1-7) TYPE 5 Databus ID
• Connection to VRC0P-1LW: DB9M 9 Pin Port
• Connection to M1: Elevator Screw Terminals (4)
62158 55086 7
• Operating Voltage: 12 Volts DC
• Current Draw: 31mA
• Housing: 4.25” x 6.375” x 2.125”
• Circuit Board: 2.75” x 3.95
NOTE: The Leviton VRC0P+3 is not included with the M1XSLZW.
It must be purchased separately.
Specify Leviton Part Number: VRC0P-1LW
M1 Controls & Accessories
M1 to Leviton Z-Wave Interface
M1 to Lutron RadioRA 2 Interface
The M1XSLU is a dedicated M1 serial expander for connecting M1 Controls to a Lutron RadioRA 2 Main
Repeater. RadioRA 2 is a wireless multi-room control system for Lights, Shades, and HVAC Thermostats.
Interfacing a RadioRA 2 system to an M1 allows control in response to security system actions or
conditions. With the automation and remote capabilities built into M1 it is possible to control RadioRA
2 devices from across the room or across the world. Benefits include energy savings, convenience, and
comfort.
ELK-M1XSLU
• Activity/Status LED (Orange)
• Auto-Resetting Hardware Watchdog Circuit
• Addressable (1-7) TYPE 5 Databus ID
• Connection to Main Repeater: RS-232 Cable
(included)
7
62158 55085 0
• Operating Voltage: 12 Volts DC
• Current Draw: 31mA
• Housing Dimensions: 4.25” x 6.375” x 2.125”
• Circuit Board: 2.75” x 3.95”
• Connection to M1: Elevator Screw Terminals (4)
M1 to Lutron Caséta Interface Kit
The ELK-M1XSLC Interface Kit contains the necessary ELK components (ELK-M1XSLU and ELK-IP232)
needed for interfacing M1 Controls to Lutron’s Caséta Wireless and their Smartbridge Pro interface. Lutron
Caséta is a wireless control system for Lights, Shades, and future additional products. Interfacing an M1
Control to Caseta allows intelligent control of the Caséta devices in response to security system actions or
conditions.
ELK-M1XSLU
ELK-M1XSLC
7
62158 55088 1
• Connects to M1 data bus and to IP232 via RS232
and null modem (included)
• Operating Voltage: 12VDC (Supplied from M1)
• Current Draw: 31mA
• Housing Dimensions: 4.25” x 6.375” x 2.125”
ELK-IP232
• Connects to Lutron Smartbridge Pro
• Operating Voltage: 12VDC supplied from
ELK-P1216 (included)
• Current Draw: 135mA
• Dimensions: 3.85” L x 1.7” W x 0.93”D
UPB Interface for M1 Controls
The ELK-M1PCSPIM is a special Powerline Interface Module containing a built-in M1XSP Serial Port chip.
This all-in-one device makes it easy to permanently connect the ELK M1 Control to a UPB network.
ELK-M1PCSPIM
7
62158 55073 7
• Compact, space saving interface
• Easy hookup -- 4-wire data bus connection
• NO 9-Pin Serial Cable Required
• UPB Status light (multicolored)
• M1 Data Bus Status Light (Green)
• Lower cost than purchasing separate M1XSP
and PCSPIM products
• Removable 4-pin terminal block connection
• Power:
-UPB Network circuitry – powered from the
AC “Primary” Line.
-M1 Data Bus Device circuitry – powered
(12VDC) from the M1 Data Bus
• Current Draw from M1: ~30mA @ 12 VDC
• M1 Bus Device Address: Preset at Address #7
• Firmware required: Standard Version
(1.0.42 or later)
23
M1 Controls & Accessories
M1 Serial Port (RS-232) Expander, Thermostat/Lighting Interface
Additional serial port(s) for M1 Controls to interface other manufacturer’s equipment utilizing RS-232
ASCII commands.
ELK-M1XSP
• Allows M1 to interface with communicating
thermostats and lighting controls*
• Adjustable baud rate 300 to 38,400
• Up to 7 M1XSP Expanders may be added to the
M1 controls
• Operating Voltage: 12 Volts DC
• Current Draw: 31mA
• Housing Size: 4.375" x 3" x 1.125"
• Circuit Board Size: 3.5" x 2.75"
* Special serial interfaces are available for several lighting/thermostat partners. Please see page 21 for more
information on these special interfaces.
7
62158 55020 1
Some Partner Manufacturers; such as AMX, Control 4, and Crestron, choose to interface through the main
serial port or ELK-M1XEP Ethernet Interface. Visit www.elkproducts.com for more details and a complete list
of partner manufacturers.
Ethernet to RS-232 Serial Bridge
The ELK-IP232 may be used to connect any standard serial communications device to an Ethernet
network. It is able to both initiate and accept network connections. Once a network connection is made,
the remote networked device is virtually connected to the serial device on the other side of the Bridge.
Both the network device and the serial device can send and receive messages to and from each other.
ELK-IP232
7
62158 55064 5
• Supports both UDP and TCP protocols
• Up to 12 simultaneous TCP-IP connections
• Up to twelve (12) "Rules" may be programmed
to make outgoing connections
• Selectable baud rate from 300 to 115200 baud
• 802.3 compliant 10/100 Mbit interface
• Software and Hardware Handshaking
• Operating Voltage: 12 Volts DC
• Current Draw: Approx. 135 mA
• Dimensions: 3.85” L x 1.7”W x 0.93” D
• RS-232, DB9M 9-pin serial port connection
• RJ45 8-pin Network Jack
• LED Indicators for Power, Link, and Data
• Includes: Serial Cable and 12V Supply
Supervised Power Supply for M1
Supervised Remote Power Supply
The ELK-P212S is a Supervised Remote Power Supply/Battery Charger, providing 12 VDC output with up
to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can
report abnormal conditions back to an ELK-M1 Control over the RS-485 four (4) wire data bus.
ELK-P212S
7
• Data-bus supervision of AC and Battery status
• Master AC and Battery ON / OFF Power Switch
• Visual AC Power Indicator
• Programmable relay output
• Two (2) Year Warranty
62158 10212 7
• AC Input: 16.5VAC, 45VA (TRG1640 or equiv.)
• DC Output Voltage: 13.8 Volts DC +/- 5%
• Current/Wattage Rating: 2.0 Amps/30 Watts
• DC Output Protection: Auto Resetting PTC
• Rechargeable Battery Size: Max. 12 Ah
• Low Battery Cutoff Threshold: ~10 Volts.
Zone Temperature Sensors
M1 Zone Temperature Sensors
Brings temperature information to M1 Controls for processing. Monitor high or low temperatures with
this add-on remote sensor. Applications: wine cellars, server rooms, commercial coolers/freezers, second
homes, agricultural uses, etc.
ELK-M1ZTS
Temperature Sensor
7
24
62158 55031 7
• Connects to any on-board zone on the M1
• Temperature may be accessed from keypads,
telephone remote control, PC, or rules
• Suitable for Indoor/Outdoor use in a
covered environment
• May be placed up to 1000’ from M1 Control
• Temperature Range: -50 to +140F
• Operating Voltage: 12 Volts DC
• Current Draw: 10mA
• Housing Dimensions: 2.375” x 1.25” x 1”
ELK-M1ZTSR
M1ZTS with 7” Stainless Remote Probe
7
62158 55032 4
Two-Way Listen-In Interfaces & Accessories
Provides 3 zones of amplified speaker outputs with adjustable volume, along with 3 zones of microphone
inputs. The M1TWA can be used to add two way listen-in to M1 Gold Controls or simply to add amplified
speakers at keypads and other locations in a building.
ELK-M1TWA
7
62158 55065 2
• Adjustable Speaker Volume Control by Zone
• Selectable Mute by Zone
• 3 Mic Input Zones (up to 4 mics per zone)
• Selectable Mic Listen by Zone or Select ALL
• For Two Way Listen-in, compatible with:
ELK-M1TWM, ELK-M1TWS, ELK-M1TWSF
• For amplified speaker applications, compatible
with traditional 8 ohm speakers
• Output Impedance Range: ~4 to 32 Ohms per
speaker output
• Amplifier Rating: 1/2 Watt per Speaker Output
• Operating Voltage: 9 to 14 Volts DC
• Current Draw: 15mA nominal, 1000mA max
• Microphone Current Draw. 5mA each
• Housing Dimensions: 4.25" x 6.375" x 2.125"
• Circuit Board Dimensions: 2.25" x 3.95"
M1 Controls & Accessories
Audio Amplifier Module with Two-Way Listen-In Capability
M1 Gold Two-Way Listen-In Interface
This can be used by Central Station to verify an alarm, or by a user from the M1Gold telephone remote
control to check on elderly parents, children, etc.
ELK-M1TWI
7
62158 55021 8
• Adds up to three (3) zones of two way listen-in
to M1G Control
• Up to 12 microphones may be connected
• May be removed from included housing and
mounted on optional glides in Elk structured
wiring enclosures
• Module powered by M1 Gold
• Compatible with: ELK-M1TWM, ELK-M1TWS,
ELK-M1TWSF
• Includes 8 conductor interface cable
• Housing: 6.5”W x 4.3”H x 2.0”D
• Board Size: 4.5”W x 3.0”H x 1.2”D
M1 Two-Way Flush Mount Speaker/Microphone
Flush Mount 12 Watt Speaker and Microphone combination for use with the M1
Controls two way listen-in interfaces
ELK-M1TWSF
• Fits single gang electrical boxes
• Requires 4 conductor cable
• Up to 12 may be connected
• Color: White
• Size: 4.81" x 3.13" x 1.69"
7
62158 55074 4
7
62158 55022 5
M1 Two-Way Speaker/Microphone
Microphone and 20 Watt Speaker combination for use with the M1 Controls
two way listen-in interfaces
ELK-M1TWS
• Requires 4 conductor cable
• Up to 12 may be connected
• Color: White
• Size: 4.25" x 4.25" x 2.13"
M1 Two-Way Microphone
Microphone only for use with the M1 Controls two way listen-in interfaces.
• Simple two wire connection
• High Sensitivity
• Up to 12 may be connected
ELK-M1TWM
• Operating Voltage: Powered from
M1TWA, M1TWI or M1EZ8TWI
• Current Draw: 5mA each
• Circuit Board Size: 1.63” diameter
7
62158 55023 2
Other Accessories
Terminal Blocks for M1
Gold Controls
4-Pin Ribbon Cable
Complete set of 6 plug-in
“replacement” terminal blocks.
ELK-M1BLOCKS
• Includes various sizes needed
•
7
62158 55028 7
for use with M1 Gold Controls
Terminal blocks are included
with M1 Gold Kits
ELK-W018B
7
62158 55066 9
Used for connecting expanders
and other peripherals to the M1
Gold Control.
• 4 pin keyed connector
• Approx. 18” long
25
M1 Controls & Accessories
M1 Gold System Design Guide
For product details, instructions on component installation, and integration partners,
please visit www.elkproducts.com
26
Tips for Mounting M1 in ELK Structured Wiring Enclosures
The right side of the M1 board is an
ideal place to mount the
ELK-M1XEP where it will be close to
the on-board serial port.
The ELK-SWP3 plate fits just
below the M1 board.
The ELK-1280 battery fits just
below the M1 board.
M1 Controls & Accessories
M1 Gold In SWB14
Modules can be installed on left
and right side of M1 Board using
the ELK-SWG Glides.
M1 Gold In SWB28
Modules can be installed on left
and right side of M1 Board using
the ELK-SWG Glides.
The right side of the M1 board is an
ideal place to mount the
ELK-M1XEP where it will be close
to the on-board serial port.
Use ELK-SWS shelf for
ELK-1280 battery.
Up to 7 additional modules can
be mounted in bottom half of
the enclosure using the
ELK-SWG Glides.
The ELK-SWP and ELK-SWP4
multi-purpose plates can
accommodate devices in housings or
other larger components.
ELK-SWP3 multi-purpose
plates can be used to mount
many M1 modules.
Check out our
“Structured Wiring &
M1” video on YouTube
for more tips & tricks!
Check out these great examples submitted by installers!
27
Structured Wiring
28” Structured Wiring Box
Multi-purpose cabinet for structured wiring, controls, & peripherals
• Versatile mounting for multiple
manufacturer’s structured wiring
modules; such as, Leviton, OnQ by
Legrand,OpenHouse, and others
• Flush Mount, Heavy Duty, locking
cover with camlock
• Color: Appliance White
• Knockout Sizes: 1/2", 3/4", and 1 1/4"
• 2” Electrical box knockout in bottom
• Size: 14.25" W x 28" H x 4.5" D
• UL Listed
7
62158 80015 3
7
62158 80014 6
7
62158 80016 0
7
62158 80006 1
7
62158 81007 7
ELK-SWFD28
Structured Wiring
ELK-SWB28
• Replacement Door with Camlock for ELK-SWB28
• Door Size: 15.63” x 29.88” x .63”
7
62158 80018 4
14" Structured Wiring Box
Multi-purpose, surface mount cabinet for structured wiring, controls, & peripherals
ELK-SWB14
• Versatile mounting for multiple
manufacturer’s structured wiring
modules; such as, Leviton, OnQ by
Legrand,OpenHouse, and others
• Heavy Duty, Tab Hinged Door
with Camlock
• 2" electrical box knockout in bottom
• Color: Appliance White
• Knockout Sizes: 1/2", 3/4", and 1 1/4"
• Size: 14.25" Square x 3.5"D
• UL Listed
Flush Mount Door for ELK-SWB14
Turn the SWB14 into a flush mount enclosure! Can be adjusted for varying wall
finish thickness and this locking, removable, hinged door extends beyond the box
edges approx. 5/8”, easily concealing uneven cutouts of the wallboard edges.
ELK-SWFD14
• Ideal for hollow frame walls with
studs on 16” centers
• Size: 15.5”W x 15.8” H x .5” D
Circuit Board Glides
For mounting ELK-M1 expansion boards or other manufacturer’s boards into the
Elk structured wiring enclosures
ELK-SWG
• Vertical Mounting
• Includes mounting screws
• Size: 2 7/8” D
A GREAT SPACE SAVING OPTION FOR
MOUNTING M1 EXPANSION MODULES!
3” Multi-purpose Adapter Plate
Convenient, multi-purpose plate adapts peripherals, expansion boards, devices,
etc. to fit Elk structured wiring enclosures
• Mounts into Elk structured wiring
enclosures or on SWR rails
ELK-SWP3
28
• Size: 6.5”W x 3” H x .5” D
ACCOMMODATES MANY M1 EXPANSION MODULES!
4.75” Multi-purpose Plate
Convenient, multi-purpose plate adapts peripherals, expansion boards, devices,
etc. to fit Elk structured wiring enclosures
• Mounts into Elk structured wiring
enclosures or on SWR rails
• Size: 6.25”W x 4.75” H x .5” D
62158 80007 8
7
ELK-SWP
4” Multi-purpose Adatper Plate
Convenient, multi-purpose plate adapts peripherals, expansion boards, devices,
etc. to fit Elk structured wiring enclosures
• Mounts into Elk structured wiring
enclosures or on SWR rails
ELK-SWP4
• Size: 6.44”W x 4” H x .5” D
7
62158 81001 5
7
62158 80009 2
7
62158 80011 5
7
62158 80012 2
7
62158 80013 9
7
62158 80008 5
ACCOMMODATES MANY M1 EXPANSION MODULES!
Structured Wiring
Battery Shelf
Holds up to an 8 Ah battery
• Mounts into the Elk structured wiring
enclosures or onto the SWR rails
• Size: 6.25”W x 4.75” H x 3.25” D
ELK-SWS
Nylon Standoffs for Circuit Boards
For attaching ELK-M1 expansion boards or other manufacturer’s boards onto the
ELK-SWP or ELK-SWP3 plates
ELK-SWNS1
• Color: White
• 1/4” spacing, fits .156” hole
• Package of 10 standoffs
Grommet Donuts
Pack of 2 grommet donuts for use in structured wire enclosures
ELK-SWD1
• For use in 1.75” wire holes.
• Protects wires from nicks and
scrapes
• Outside Hole Diameter: 1.75”
• Inside Hole Diameter: 1.25”
• Color: Black
Snap Lock Rivets/Plungers
Replacement rivets/plungers for ELK-SWP and ELK-SWP3 plates and ELK-SWS
battery shelf
• Color: Black
• Package of 10
ELK-SWNSL
Mounting Rails
A package of 2 universal rails to mount adapter plates and modules; such as, Telephone, CATV, or Network modules. Accommodates modules from Leviton, OnQ by
Legrand, OpenHouse, and others.
ELK-SWR
• Can be mounted to plywood or
other manufacturer’s structured
wiring boxes
• Size: 1.125"W x 12.5" H x .375" D
• Not required in Elk structured
wiring enclosures
29
Universal Automation Accessories
Water Shutoff Valve
Automation Accessories
The ELK-WSV2 is a new and improved model of our highly popular electric water shutoff valve. It is
designed for residential and light commercial domestic water applications. Used in conjunction with an
automation controller, leak detection devices, or a simple manual push button, the WSV2 can easily and
conveniently shut off the main water supply to the building.
ELK-WSV2
• Rapid Action - Opening or Closing
• Manual control handle for power outages
• Integrates to Security or Automation Controller
(e.g. M1 Gold or M1EZ8)
• Can be Integrated with a Manual Push Button or
Wireless Receiver and Wireless Push Button
• Valve Direction/Water Flow Indication
• Overall Dimensions: 7.75” H, 4.5” W, 4” D
• Two (2) Year Warranty
• MADE IN USA
• Requires 12VDC Power Supply
• Current Draw: 800mA to1.5 Amp
• Actuating Speed: < 2 seconds
• Torque: 1.25 in. lbs.
• Connections: 18 gauge, 4 conductor cord
• Full Port, 2-way Ball Valve
• Stainless Steel Grade 316
• 1" NPT threaded pipe connections
• NSF 61 Approved for Drinking Water
• NEMA 6P & 7D Enclosure
Doorbell & Telephone Ring Detector
Detects doorbell and/or telephone ring to trigger automation events.
ELK-930
7
• Snap apart board includes: (2) doorbell sensors
and (1) phone sensor
• Double Sided Foam Mounting Tape Included
• Packaged in Reusable Poly Storage Box
• Lifetime Limited Warranty
• Max Doorbell Input: 24 Volts AC Nominal
• Doorbell Detection Current: 900mA minimum
• Max Output: 40mA @ 12 Volts DC
• Size 3.4" x 2.75" x .625"
62158 00930 3
Heavy Duty Relay/Contactor
Designed for remotely controlling high current devices. The relay coil is pre-wired with a three (3) prong
plug-in cord. This plug is compatible with virtually any appliance style automation module (purchased
separately) including: UPB, Insteon, ZWave, Zigbee, X10, etc. A simple remote command can be sent to
activate the automation module, which activates the ELK-9200 relay, permitting the safe and easy On/Off
switching of up to 60 Amps of electrical current.
ELK-9200
7
30
62158 09200 8
• Pre-Wired Terminal Lugs for easy Installation
• 110 VAC Plug Cord for Energizing Relay Coil
• Heavy Duty "Lockable" Metal Enclosure
• Relay Suitable for a 110 VAC or 220 VAC Load
• Ideal for Water Heaters, Motors, Gates,
Pumps, etc.
• Lifetime Limited Warranty
• Operating Coil Voltage: 110 VAC
• Coil Current Draw: < 35 mA
• Relay "Contactor" Current Capacity:
60 Amps AC maximum
• Metal Enclosure Size: 12" x 12" x 3.375"
• Color: White
• Not suitable for wet locations
Stainless Steel Enclosed Speakers/Sirens
ELK’s 1RT speaker and 150RT siren provide a rugged quality, tamper resistant “no
rust” enclosure perfect for all jobs. With their compact design and stainless steel
construction, these speakers and sirens naturally reflect the mounting surface,
blending easily into the surroundings. Great for harsh environments.
• Rust free, Guaranteed
• Compact, yet super loud
• Heavy duty magnet and mylar cone
• Matching strobe (ELK-SL1) in 4 colors
• Exterior or interior use
• Tamper resistant
• Anti-foam and insect screen
• Size: 5”W x 5” H x 4” D
• 304 Stainless Steel with stainless hardware
• Lifetime Limited Warranty
ELK-1RT
ELK-150RT
• Clear Voice & Sound Reproduction
• High Fidelity voice coil
• Impedance: 8 Ohms
• Rating: 30 Watts Nominal / 50 Watts Peak
• Frequency Response: 500 to 7000 Hz
• Heavy duty magnet
• Works well with any control to produce
separate sounds (ComboTrigger™) for fire
and burglar from a single pulsing output
• Output: 118 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 to 14 Volts DC
• Current Draw: 1.2 Amps @ 13.8VDC
Speaker & Stainless Steel Enclosure
7
Siren & Stainless Steel Enclosure
7
62158 00001 0
62158 00150 5
Strobes
Strobe for Stainless Speaker/Siren
A weather resistant, indoor/outdoor strobe light. Adds visual indication for alarms, warnings, hearing
impaired applications, etc. Attaches easily to ELK’s stainless steel units (ELK-1RT & ELK-150RT) or to wall
using ELK-WK1. Features simple 12VDC two wire hookup, low current draw, and compatibility with most
control panels.
ELK-SL1C mounted
to ELK-1RT
• Interior or exterior use
• Can work with pulsing alarm outputs
• Fits ELK Stainless Speaker/Sirens
• May be wall mounted (see ELK-WK1)
• Easy to Install, simple 2 Wire Hookup
• Lifetime Limited Warranty
7
62158 91002 9
ELK-SL1B
Blue Strobe
7
62158 91003 6
ELK-SL1C
Clear Strobe
7
62158 91001 2
ELK-SL1R
Red Strobe
7
62158 91004 3
Wall Mount Kit for ELK-SL1 Strobe Light
Aesthetically pleasing cover allows mounting of ELK-SL1 directly to wall surfaces.
ELK-WK1
• Attractive cover
• Indoor/Outdoor
• Durable ABS Plastic
• Easy to Install
• Color: White
• Mounting Hardware Included
• Size: 5.125" x 2.625" x 1.375"
• Lifetime Limited Warranty
7
Speakers/Sirens
ELK-SL1A
Amber Strobe
• Durable Polycarbonate Construction
• Colors: Clear, Red, Blue, or Amber
• Operating Voltage: 12 Volts DC
• Current draw: 210mA
• Flash Rate: Approx. 1 Flash per second
• Size: 4.875" x 3.875" x 1.125"
62158 91005 0
31
Echo™ Paintable Speakers/Sirens
The versatile Echo™ Series speakers and sirens are designed to be heard but not seen! Sound "echoes" off
mounting surface from back plate edge. The unique contemporary design has a smooth, paintable, “no grill”
surface that easily blends with any decor.
• May be painted or wallpapered to please the most discerning decorator
• Mounts to any flat surface or single gang electrical box
• Interior use only
• Color: White
• Mounting Hardware Included
• Lifetime Limited Warranty
ELK-70
ELK-71
• Interior Speaker
• Great for Voice and Sounds
• Impedance: 8 Ohms
• Rating: 20 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Size: 4.375" H x 6.375"W x 1.875" D
• Interior Alarm Siren with Yelp and Steady Tones
• Operating Voltage: 6 - 14 Volts DC
• Sound Level: 100 db @ 1 Meter, 13.8VDC
• Current Draw: 480mA @ 13.8VDC
• Size: 4.375” H x 6.375"W x 1.875” D
Echo™ Speaker
7
Echo™ Siren
62158 00070 6
7
62158 00071 3
ELK-73
ELK-74
• Small, Interior Speaker
• Great for Voice and Sounds
• Impedance: 8 Ohms
• Rating: 20 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Size: 4.56" H x 4.3"W x 1.875" D
• Small, Interior Alarm Siren with Yelp and
Steady Tones
• Operating Voltage: 6 - 14 Volts DC
• Sound Level: 100 db @ 1 meter, 13.8VDC
• Current draw: 480mA @ 13.8VDC
• Size: 4.56" H x 4.3"W x 1.875” D
Compact Echo™ Speaker
7
Compact Echo™ Siren
7
62158 00073 7
62158 00074 4
Interior Speakers/Sirens
Flush Mount Speaker
Flush mount speaker features compact, low profile design. Wall plate size allows
unit to be unnoticed at outlet height. 32 ohm impedance allows multiple speakers
to be wired in parallel, while maintaining an overall load rating that is
acceptable for most control panels.
• Ideal for alarm or voice applications
• Fits single gang electrical boxes
• Lifetime Limited Warranty
7
• Impedance: 32 Ohms
• Rating: 12 Watts
• Size: 4.81” x 3.13” x 1.44”
62158 00012 6
Speakers/Sirens
ELK-SP12F
32
ELK-SP35
ELK-SS36
20 Watt Interior Speaker
• Compact
• Easy To Mount
• Interior use only
• Color: White
• Hardware Included
• Lifetime Limited Warranty
• Multi-purpose Interior Speaker
• Great for voice or sounds
• Impedance: 8 Ohms
• Rating: 20 Watts Nominal
• Frequency Response: 250 to 8000 Hz
• Size: 4.25” H x 4.25”W x 2.13” D
7
62158 00035 5
Two Tone Interior Siren
• Self-Contained, Interior Alarm Siren
• Two Input Channels - Steady & Yelp
• Output: 108 db @ 1 meter, 13.8VDC
• Operating Voltage: 12 Volts DC
• Current draw: 500mA @ 13.8VDC
• Size: 4.25” H x 4.25”W x 2.13” D
• UL Listed
7
62158 00036 2
Multi-Purpose Speakers/Sirens
ELK-44
ELK-45
• Ideal for Alarm Systems or Paging
• Loud - Rivals Sound of Larger Speakers
• Heavy duty magnet and mylar cone
• High Fidelity Voice Coil
• Impedance: 8 Ohms
• Rating: 30 Watts Nominal / 50 Watts Peak
• Frequency Response: 500 to 7000 Hz
• ComboTrigger™ Produces two distinct
tones from single pulsing alarm outputs
• Output: 118 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 to 14 Volts DC
• Current Draw: 1.2 Amps @ 13.8VDC
30 Watt Speaker
• Rugged, Compact
• Easy To Mount
• Interior or Exterior use
• Color: Black
• Size: 4" H x 4"W x 3.5" D
• Lifetime Limited Warranty
7
Loud, Self Contained Siren
62158 00044 7
7
62158 00045 4
Compact, Dual Tone Siren
Self-contained, exterior alarm siren. Small size makes it ideal for tight spaces.
ELK-M120
• Yelping or Steady Siren Sound
• Easy To Mount
• Interior or Exterior use
• Lifetime Limited Warranty
7
62158 10120 5
ELK-SP15
ELK-SS15
• Multi-purpose, horn speaker
• Impedance: 8 Ohms
• Rating: 15 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Self-contained, exterior alarm siren
• Two Tones - Yelp & Steady
• Output: 115 db @ 1 meter, 13.8VDC
• Operating Voltage: 12 Volts DC
• Current Draw: 550mA @ 13.8VDC
• UL Listed
15 Watt Speaker
• Easy To Mount
• Interior or Exterior use
• Color: White
• Size: 5.25" x 6"
• Lifetime Limited Warranty
7
Two Tone Siren
62158 00015 7
7
62158 10015 4
ELK-SP30
ELK-SS30
• Multi-purpose horn speaker
• Great for voice or sounds
• Ideal for Alarm Systems or Paging
• High Fidelity Voice Coil
• Impedance: 8 Ohms
• Rating: 30 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Self-contained, exterior alarm siren
• Two Tones,Yelp & Steady
• Output: 122 db @ 1 meter, 13.8VDC
• Operating Voltage: 12 Volts DC
• Current draw: 1000mA @ 13.8VDC
• UL Listed
30 Watt Speaker
7
62158 00030 0
Two Tone Siren
7
62158 10030 7
40 Watt Speaker
Heavy duty, horn speaker when maximum volume and clarity are a must. Great for
voice or sounds!
ELK-SP40
• Ideal for Alarm Systems or Paging
• Tamper Loop
• Interior or exterior use
• High Fidelity Voice Coil
• Lifetime Limited Warranty
• Impedance: 8 Ohms
• Rating: 40 Watts Nominal
• Frequency Response: 250 to 8000 Hz
• Color: White
• Size: 11" x 6.5" x 8.5" deep
7
Speakers/Sirens
• Easy To Mount
• Interior or Exterior use
• Color: White
• Size: 6" x 8" x 9.5"
• Lifetime Limited Warranty
• Output: 110 db @ 1 meter, 13.8VDC
• Color: White
• Operating Voltage: 12 Volts DC
• Current draw: 500mA @ 13.8VDC
• Size: 3.25" x 4” x 4” diameter
62158 00040 9
33
Siren / Voice Drivers
Siren, Voice, & Recordable Drivers
In traditional alarm applications, a siren driver broadcasts a warning sound to ward off intruders or alert the
property owner to an intrusion or fire. Adding voice to the siren driver allows you to broadcast a clear, concise
message that eliminates the guesswork for small children, the elderly, and the rest of us to clarify the sound.
Step up to a recordable driver and expand your market to those needing messages for: sales promotions,
greetings, alerts, industrial broadcast, gate access, museum exhibit information, amusement park sounds, and
more.
What makes ELK drivers different?
Each ELK driver provides compatiblity with virtually any control panel while offering volume and current draw
options. The ELK-120 and ELK-124 feature both a traditional speaker output and a RCA line level output for
interfacing with amplified systems such as paging, intercoms, or nurse call.
ALL ELK SIREN DRIVERS FEATURE LIFETIME LIMITED WARRANTY!
ELK-100
Siren Sounds
Recordable
ELK-110
ELK-120
ELK-124
✔ Yelp, Steady,
✔ Yelp, Steady
✔ Yelp (Burg),
✔ Preloaded Yelp,
✔ No Preloaded
✖ No Voice
✖ No Voice
✔ Burg, Fire, and CO
✔ Preloaded Burg
✔ No Preloaded
✖ NO
✖ NO
✖ NO
✔ YES
✔ YES
Slow Sweep
Voice Capability
ELK-101
Temporal Coded
Tones (Fire & CO)
Voice Messages
Industrial Horn &
Temporal Coded
Tone (Fire)
& Fire Messsages
4 Channels
Sounds
Messages
8 Channels
Connections
Flying Leads
Screw Terminals
Plug-In Harness
Screw Terminals
Screw Terminals
Sound Level
120 dB @ 1 meter
112 dB @ 1 meter
122 dB @ 1 meter
122 dB @ 1 meter
122 dB @ 1 meter
Volume Settings
Two Levels
(High/Low)
None
VolumeStep™ (slowly
increases siren volume)
Adjustable Volume
Adjustable Volume
Current Draw
(Min /Max)
700mA / 1.2 Amps
305mA / 950mA
800mA / 1.25Amps
200mA / 2 Amps
200mA / 2 Amps
Operating
Voltage
6-14 VDC
6-14 VDC
10-14 VDC
11-14 VDC
11-14 VDC
Dimensions
2.75” x 3.6” x 1”
1.9” x 2.3” x .7”
2.75” x 4.0” x 1.13”
3” x 5” x .8”
4.38” x 6.5” x 2”
(enclosure)
Lifetime Limited
Warranty
✔ YES
✔ YES
✔ YES
✔ YES
✔ YES
PC Sound Card Interface for Recordable Drivers
This interface allows you to download Audio .Wav files from your computer to ELK’s recordable modules.
ELK-129
7
34
62158 00129 1
• Program ELK’s recordable modules from PC
• Audio Jacks: Computer in and speaker out
• Includes: 6 Ft. audio cable, ribbon interface
cable, and CD-ROM with software
• Lifetime Limited Warranty
• Software requires MS Windows 95 or higher
• PC requirements: Stereo speaker output jack or
Sound Card and speakers
• Input Power Required for programming
ELK-120 or ELK-124: 12 VAC, 20VA Transformer
(not included)
High Performance Siren Driver
ELK-100
7
62158 00100 0
• Two Volume Levels
• 3 sound options: Steady, Yelp, and Slow Sweep
• MilliMiser™ Lowers Current Draw
• ComboTrigger™ for Controls with Single
Alarm Outputs
• Pre-Wired for easy installation
• Lifetime Limited Warranty
• Output: 120 db @ 1 meter, 13.8VDC OR
109 dB on MilliMiser™ setting
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Operating Voltage: 6 to 14 Volts DC
• Current Draw: 1.2 Amps @ 13.8VDC,
(700 mA on MilliMiser™setting)
• Size: 2.75" x 3.6" D
Siren / Voice Drivers
Great for residential or commercial alarm installations, the ELK-100 draws less current than many siren
drivers. It offers 2 volume levels simultaneously, allowing exterior sound to be louder than interior.
Two Channel Siren Driver
ELK-101
7
62158 00101 7
The ELK-101 is a two channel (Yelp and Steady) siren driver. It is capable of delivering high output volume
while consuming very low current draw. It can be powered from 6 or 12 VDC and is compatible with a
wide variety of alarm panels.
• Two channel operation, steady and yelp sounds
• Reverse polarity protection
• Steady overrides yelp if both are triggered
• Output: 112 db @ 1 meter, 13.8VDC
• High volume output
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Very low current draw
• Operating Voltage: 6 or 12 Volts DC
• Terminal blocks for easy hookup
• Current Draw: 305mA to 950mA
• Lifetime Limited Warranty
• Size: 1.9”H x 2.3”W x .7”D
CO, Burg & Fire Voice Siren Driver with Temporal Codes
ELK-110
7
62158 00110 9
Now Featuring Carbon Monoxide Input Channel! The ELK-110 is ideal for residential and commercial
alarm applications. It combines the advantages of high quality voice messages with conventional siren
and temporal code tone sounds. It features 3 input channels, bilingual voice messages, and many unique
options.
• Three Input Channels, Burglar, Fire, and CO
• Nom. Operating Voltage: 10-14 Volts DC
• Siren only, Voice only, or combined
• Nom. Current Draw: 1.25 Amps (8 Ohm Spkr)
• Bilingual Voice - English and/or Spanish
• MilliMiser™ Current Draw 800 mA
• Temporal Coded Tones - ANSI standard Audible
• Min. Low Current Trigger: 10.5VDC
Emergency Evacuation Signaling
• Sound Level: 122 db @1 meter
• Speaker Trouble Supervision
• Freq. Temporal 3=800Hz, Temporal 4=1000Hz
• Lifetime Limited Warranty
• Maximum Speaker Loading: 4 Ohms
• Size: 2.75” X 4.0” (70mm X 102mm)
Recordable Voice and Siren Driver with Temporal Code
This unique driver can be utilized as 4 voice recordable channels or 2 siren channels and 2 voice channels.
Recording is easy using on-board microphone or .wav file download from a PC using ELK-129.
ELK-120
7
62158 00120 8
• Up to 4 messages, or 2 voice + 2 siren
• On-board microphone
• 24 W Audio Amplifier with volume control
• One shot & repeat modes of playback
• Line level and speaker outputs
• Momentary/maintained “+” triggering
• Connector for PC sound card interface, ELK-129
• Lifetime Limited Warranty
• Sounds: Classic Yelp Siren,Temporal Coded
Horn, and Steady Industrial Horn
• Maximum record time: 8 minutes
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Output: 120 db @ 1 meter, 13.8VDC
• Operating Voltage: 11 to 14 Volts DC
• Current Draw: 200 mA Nom., 2 A Max.
• Size: 3” x 5” x 1.25”
Recordable Voice Annunciator
Applications are endless with this versatile unit. It allows up to 8 custom announcements which can be
related to security, access control, museum narratives, amusement sounds/messages, on-hold messages
for phone systems, equipment warnings, etc.
ELK-124
7
62158 00124 6
• Up to 8 messages
• On-board microphone
• 24 W Audio Amplifier with volume control
• One shot & repeat modes of playback
• Line level and speaker outputs
• Momentary/maintained "+" or "-" triggering
• Connector for PC sound card interface, ELK-129
• Lifetime Limited Warranty
• Maximum record time: 8 minutes
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Output: 120 db @ 1 meter, 13.8VDC
• Operating Voltage: 11 to 14 Volts DC
• Current Draw: 200 mA Nom., 2 A Max.
• Enclosure Size: 4.375” x 6.5” x 2”
35
Reliable Power
for a variety of applications!
NEW!
Power
Power Supply & Battery Charger
Low Battery Supervision
Master Power Switch
and Deep Discharge Cutoff Protection
Turns On/Off DC Input & Battery
Power Supplies
POWER SUPPLY/BATTERY CHARGER KITS
ELK-P1215K
Multi-purpose power supplies for security, access control, cameras, etc.
Provides up to 1.5 amps of current at 12VDC (nominal). These power
supplies feature low battery supervision output with built in low battery
cutoff and master power switch.
• Auto-Resetting Overload Protection
• Built-In Battery Charging Circuit
• Low Battery Trouble Output
• Low Battery Deep Discharge Cutoff Protection
• Master Power Switch
• Lifetime Limited Warranty
• Power Supply Input: 14 Volts DC provided by ELK-P1417
• Continuous Output Current: 1.5 Amps
• Low Battery Trouble: 11 Volts (nominal)
• Low Battery Cutoff: 9 Volts (nominal)
• PC Board Size: 2.25” X 2.5”
• Battery Charging Capacity: 1 to 12 Ah
ELK-P1215
ELK-P1215K
12VDC Power Supply & Charger
• Intelligent Charger Board
• 14VDC Plug-in Power Supply (ELK-P1417)
12VDC Power Supply & Charger with Battery
7
62158 01418 5
• Intelligent Charger Board
• 14VDC Plug-in Power Supply (ELK-P1417)
• 12V, 5 Ah Battery (ELK-1250)
7
62158 01419 2
Plug-in DC Power Supply
All purpose 14 Volt DC Plug-In Switching Power Supply ideal for alarm, access control, and CCTV
applications. It plugs into a 120 Volt AC outlet and supplies 1.7 Amps.
ELK-P1417
36
7
62158 01417 8
• UL Listed for US and Canada
• RoHS compliant (RoHS2-2011/65/EU)
• Compliant with Energy Star EISA Level V
• Screw terminals for DC output
• Includes optional receptacle mounting bracket
• Lifetime Limited Warranty
• DC Output Voltage: 13.8 to 14 Volts DC
• Current Rating: 1.7 Amps
• Color: White
• Size with mounting bracket: 3.07” x 2.83” x 1.5”
CANNED POWER SUPPLIES
Multi-purpose power supplies with metal enclosure for security, CCTV,
access control, cellular backup, etc.
• Auto Resetting (PTC) Overload
Protection
• Visual AC & DC Power Indicators
• AC & DC Surge Suppression
• Built-In Battery Charging Circuit:
1.2Ah to 10 Ah Capacity
• Color: White
• Heavy Duty Metal Enclosure
with camlock
• Size: 12”W x 12” H x 3.5” D
• Lifetime Limited Warranty
ELK-P112K
ELK-P112
ELK-P124
12VDC Power Supply & Battery Charger in Can
• Continuous Current Rating: 1 Amp
• Includes ELK-TRG1640 Transformer
7
62158 00112 3
ELK-P112K
7
62158 10124 3
7
62158 20124 0
ELK-P124K
12VDC Power Supply & Battery Charger in Can
with battery
24VDC Power Supply & Battery Charger in Can
with batteries
7
62158 10112 0
• ELK-P124 kit with two 12 V, 5Ah batteries
Power
• ELK-P112 kit with 12 V, 5Ah battery
24VDC Power Supply & Battery Charger in Can
• Continuous Current Rating: 800 mA
• Includes ELK-TRG2440 Transformer
ELK-P983
12VDC Power Supply & Battery Charger in Can
• Ideal for use with cellular radio transceivers
• Special knockout for antenna
• Ample room in enclosure for up to two (2) 7 or
8Ah Rechargeable Batteries (not supplied)
7
• Supplies 12 Volts DC Power
• Current: 2.5A Peak, 1A Continuous
• Requires a 16.5 VAC, 45 VA Transformer
(not supplied)
62158 00983 9
ELK-P412
4 Amp, 12VDC Power Supply & Battery Charger in Can
• Three (3) PTC Protected Power Outputs
• Master Power On/Off Switch
• Visual Power Indicators
• Switching Power Supply, no transformer needed
• Built-In Battery Charging Circuit
7
• Regulated Output Voltage: 13.8 Volts DC
• Continuous Current Rating: 4 Amps
• AC Input Voltage Range: 120 VAC @ 47-63Hz
• Built-in Low Battery Cutoff: ≈ 10 Volts
• Battery Recharging Capacity: 1.2Ah to 10 Ah
62158 10412 1
6, 12, or 24VDC Power Supply Board
ELK-P624
7
62158 00624 1
Trouble-free, general-purpose power supply/charger ideal for alarm, access control, and CCTV
applications. Features auto-resetting “fuseless” overload protection which eliminates costly service calls
to replace blown fuses.
• Auto-Resetting "fuseless" overload protection
• Output Current:
• Selectable 6, 12, or 24VDC Output
• 1.2 Amps @ 6V
• Visual AC & DC Power Indicators
• 1 Amp @ 12V
• Built-in Surge Suppression
• .8 Amps @ 24V
• Battery Charging Circuit
• Input Transformer Requirements:
• Size: 3”W x 3” H x 1” D
• 6V operation: 12 VAC Transformer
• Lifetime Limited Warranty
• 12V operation: 16.5 VAC (TRG1640)
• 24V operation: 24 VAC (TRG2440)
37
Supervised Remote Power Supply
The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with
up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and
can report abnormal conditions back to an ELK-M1 Control over the RS-485 four (4) wire data bus. It also
features relay outputs for AC and Low Battery to allow “stand-alone” operation with other controls.
• M1 Control allows:
- Remote power reset of powered peripherals
- Data-bus supervision of AC and Battery status
• Stand-alone flexibility
- Two (2) sets of DC outputs
- On-board relay to supervise battery status
- On-board relay to supervise AC status
• Master AC and Battery ON / OFF Power Switch
• Visual AC Power Indicator
ELK-P212S
7
62158 10212 7
• AC Input: 16.5VAC, 45VA (TRG1640 or equiv.)
• DC Output Voltage: 13.8 Volts DC +/- 5%
• Current Rating: 2.0 Amps
• Wattage: 30 Watts
• DC Output Protection: Auto Resetting PTC
• Rechargeable Battery Size: Max. 12 Ah
• Low Battery Cutoff Threshold: ~10 Volts.
• Load Regulation: + / - 2%
• Two (2) year warranty
Plug-in Switching DC Power Supply
Power
All purpose 12 Volt DC Plug-In Switching Power Supply ideal for alarm, access control, and CCTV
applications. It plugs into a 120 Volt AC outlet and supplies 1.5 Amps of regulated 12VDC.
• Computer Grade Switching Power Supply
• Regulated 12VDC Output
• Slimline Design
• UL Listed
• RoHS Compliant
• Efficiency Level: V
• Lifetime Limited Warranty
ELK-P1216
7
62158 01216 7
• DC Output Voltage: 12 Volts DC
• Current Rating: 1.5 Amps
• Six foot cord and 2.1mm x 5.5mm x 9mm
Power Plug (center positive)
• Color: Black
• Size: 3"H x 2"W x 1.75"D
POWER SUPPLY FEATURE COMPARISON
ELK-P112
ELK-P124
ELK-P983
ELK-P624
ELK-P412
ELK-P1215
ELK-P1417
ELK-P212S
ELK-P1216
Voltage
12 VDC
24 VDC
12 VDC
6, 12, or 24
VDC
12 VDC
12 VDC
14 VDC
12VDC
12VDC
Current
1A
800 mA
2.5 A Peak,
1A
Continuous
1.2 A @ 6V
1 A @ 12V
800mA @ 24V
4A
1.5 A
1.7 A
2A
1.5 A
Supervision
✖
NO
✖ NO
✖ NO
✖ NO
✖ NO
✔ Low
✖ NO
✔ AC Failure ✖ NO
On/Off
Switch
✖ NO
✖ NO
✖ NO
✖ NO
✔ YES
✔ YES
✖ NO
✔ YES
Required
Transformer
ELKTRG1640
(Included)
ELKTRG2440
(Included)
16.5VAC,
45VA
Transformer
(not
included)
6V: 12VAC
Transformer
12V: 16.5VAC
(TRG1640)
24V: 24VAC
(TRG2440)
Includes
6ft. AC
Power Cord
P1417
(Included)
N/A
ELK-TRG1640 N/A
(not included)
Battery
Charging
Capacity
1.2Ah to
10Ah
1.2Ah to
10Ah
1.2Ah to
10Ah
1.2Ah to 10Ah
1.2Ah to
10Ah
1 to 12 Ah
N/A
1 to 12 Ah
N/A
Enclsoure
Included
✔
✔
✔ YES
✖ NO
✔
✖ NO
✖ NO
✖ NO
✖ NO
Kit Available
with 5Ah
Battery
✔ YES
ELK-P112K*
✔ YES
ELK-P124K*
✖ NO
✖ NO
✖ NO
✔ YES
ELK-P1215K*
✖ NO
✖ NO
✖ NO
Lifetime
Limited
Warranty
✔
✔
✔
✔
✔
✔
✔
✖ NO
✔
YES
YES
YES
YES
YES
YES
YES
YES
Battery
YES
*Batteries in kits carry 2 year warranty. Other component carry lifetime limited warranty.
38
YES
& Low Battery
2-Year
Warranty
✖ NO
YES
Auto-Resetting Transformers
Auto-resetting, lifetime warranted transformers with grounding prong and
grounding screw terminal. Step down transformer for low voltage systems, such
as Access Control, Security, & CCTV.
• Green Power On LED
• Wire Strain Relief
• Auto-Resetting (PTC) Fused Secondary
• Grounding Prong & Terminal
• Wire Strain Relief
• Electrical outlet mounting tab
• Color: White
• Size: 4.14” H x 2.74”W x 2.2” D
• UL Listed
• Lifetime Limited Warranty
ELK-TRG1640
16.5 VAC, 45 VA Auto Resetting Transformer
• Input Voltage: 120 VAC, 60Hz, .43W
• Output Voltage: 16.5 Volts AC
• Output Power: 45 VA
ELK-TRG2440
62158 11640 7
7
24VAC, 40 VA Auto Resetting Transformer
• Input Voltage: 120 VAC, 60Hz, .43W
• Output Voltage: 24 Volts AC
• Output Power: 40 VA
62158 12440 2
7
62158 30009 7
Power
7
Power Distribution Units
These convenient modules distribute power from a single AC or DC source to up to 9
outputs for centrally powering cameras, PIR's, photobeams, etc.
• Terminal blocks & 2.1mm DC power jack for power connection
• Auto-resetting PTCs help prevent a shorted output from disabling the other outputs
• Master Power On/Off Switch
• Visual LED Power Indicators on each Output
• Convenient Test Points for measuring Total Current Draw
• Outputs may be paralleled to increase max current draw from each output
• Requires a 6 to 30 volt AC or DC power source (not included)
• Color: White
• Size: 6.5” x 4.3” x 2”
• Lifetime Limited Warranty
ELK-PD9
• Max current draw: 250mA from each output
• Max combined current draw: Not to exceed
input Power Source or 2.3A
ELK-PD9HC
7
62158 00009 6
• Max current draw: 400mA from each output
• Max Combined Current Draw: Not to exceed
input power source or 3.6A
Camera Power Distribution Module
Conveniently distributes a single 12 to 24 VDC power source input into four (4) outputs for centrally
powering IP/Video Cameras, PIRs, Photobeams, etc. A fifth (5th) output provides either a 5 or 9 VDC
output. Outputs 1 to 4 are protected with auto reset PTC circuit protectors at 300 mA ea. Output 5 is
protected with a 500 mA PTC.
•
ELK-PD405P
7
62158 10005 5
•
•
•
•
Auto-Resetting (PTC) Overload Protection (NO
FUSES to REPLACE)
Master Power On/Off Switch
Visual LED Power Indicators on each output
Size: 6.5” x 4.3” x 2”
Lifetime Limited Warranty
• Current Draw: Outputs 1 - 4 = Max. 300 mA
each, Output 5 = Max. 500 mA (5VDC setting)
• Input/Output Voltage: 12 to 24 Volts DC
• Input Connection: Screw Terminals or 2.1mm
Plug-In DC Jack
• Output Connection: Screw Terminals (POS and
NEG) for each Output
39
Sealed Lead Acid Batteries
Power
If all batteries look alike, which do you buy?
Choose ELK Batteries with a
2 Year Over-the-Counter Warranty
RECHARGEABLE BATTERIES
Premium Quality, Sealed Lead Acid Batteries with 2 Year Over-the-Counter Warranty
• Rechargeable
• All virgin materials for long life
• More lead for greater Ah capacity
ELK-0613
6 Volt, 1.3 Ah
• 3.82” L x .94” W x 2.01” H
• .187” F-1 Faston Tab
7
62158 00613 5
ELK-1213
12 Volt, 1.3 Ah
• 3.82” L x 1.77” W x 2.24” H
• .187” F-1 Faston Tab
7
62158 01212 9
ELK-12120
12 Volt, 12 Ah
• 5.94” L x 3.9” W x 3.94” H
• .187” F-1 Faston Tab
7
40
62158 12100 5
• Size comparable to other manufacturers lower Ah sizes
• UL recognized component
• 2 Year Over-the-Counter Warranty
ELK-0650
6 Volt, 5 Ah
• 2.76” L x 1.85” W x 3.94” H
• .187” F-1 Faston Tab
7
62158 00640 1
ELK-1233
12 Volt, 3.3 Ah
• 5.27” L x 2.64”W x 2.6” H
• .187” F-1 Faston Tab
7
62158 01233 4
ELK-12180
12 Volt, 18 Ah
• 7.12” L x 3” W x 6.57” H
• B1-M5 bolt & nut
7
62158 12170 8
ELK-0675
6 Volt, 7.5 Ah
• 5.90” L x 1.34” W 3.90” H
• .187” F-1 Faston Tab
7
62158 00670 8
ELK-1250
12 Volt, 5 Ah
• 3.5” L x 2.75” W x 4.17” H
• .187” F-1 Faston Tab
7
62158 01240 2
ELK-12260
12 Volt, 26 Ah
• 6.53” L x 6.89” W x 4.96” H
• B1-M5 bolt & nut
7
62158 12250 7
ELK-06120
6 Volt, 12 Ah
• 5.9” L x 1.97” W x 3.9” H
• .187” F-1 Faston Tab
7
62158 06120 2
ELK-1280
12 Volt, 8 Ah
• 5.94” L x 2.56” W x 3.98” H
• .187” F-1 Faston Tab
7
62158 01270 9
Other Power Products
Battery LifeTester™
ELK-BLT
7
62158 80002 3
A compact, easy to use service tool for testing 12 Volt rechargeable batteries. The BLT measures
internal conductivity (Mhos), which is the best indicator of a battery’s health and life expectancy. The
BLT operates as follows: For each battery brand and size installed, start by measuring and recording a
baseline Mhos reading. Then, during any service call or inspection simply measure and record the current
(most recent) Mhos reading. Always compare the current Mhos reading with the original reading. When
the current Mhos reading has reached at or around 71% of the original baseline then it is time to consider
replacing the battery.
• Compact, low cost, and easy to use
• Size 4.4" W x 3" H x 1.15" D
• 3 digit display
• Coated clips to connect to battery
• Does not discharge or damage the battery
• Lifetime Limited Warranty
• Includes self-adhesive test data labels for
recording battery readings
Self-adhesive Test Data
• Includes hard shell, protective carrying case
Labels, 100 Pack
7 62158 80010 8
• Powered by the battery under test - warns when
ELK-BLTLABELS
the battery voltage is too low for testing
Low Battery Cutoff & Master Power Switch
ELK-965
62158 00965 5
7
• Eliminates “run-away” panel headaches
• Automatic Low Battery Cutoff Protects Battery
From Deep Discharge
• Installer Friendly - Small Compact Size
• Includes AC Wires & Battery Leads
• Lifetime Limited Warranty
SAVE with 20
Piece Bulk Packs
ELK-965B20
7
62158 10965 2
• Works with most 12 Volt DC Control Panels
or power supplies
• AC Power Leads: 18 AWG, 18" Length
• Maximum Transformer Size: 18 VAC
• Battery Leads: 18 AWG, 18" Length
• Low Battery Cutoff Voltage: ~10VDC
Master Power Switch
Only, 20 Piece Bulk Pack
ELK-964B20
7
Power
Total power control for any 12V control panel or power supply. Disconnects battery if voltage falls below
10VDC as a result of extended AC power outage. Convenient On/Off switch for manual disconnect.
62158 00964 8
Relays / Timers
Relays & Timers
Compact Relay, 12 Volt
Quality, heavy duty relay module with SPDT (Form “C”) Dry Contacts. It is ideal for general purpose
switching of devices or high current loads.
ELK-912
7
• Positive Or Negative Activation
• Low Current Draw
• Elevator Style Screw Terminals
• Size: 1.1” X 1.55 “ each
• Includes Double Sided Foam Mounting Tape
• Packaged in Reusable Poly Storage Box
• Lifetime Limited Warranty
62158 00912 9
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Operating Voltage: 12 Volts DC
• Current draw: 30mA (relay on)
SAVE with “Snap
Apart” 12 packs
ELK-91212
7
62158 91212 2
Relay, 12/24 Volt
ELK-912B
7
62158 10912 6
Quality, heavy duty relay module with SPDT Form “C” contacts. It is ideal for general purpose switching of
devices or high current loads.
• High Quality Large Cross Head Screw Terminals
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Positive Or Negative Activation
• Operating Voltage: 12 or 24 Volts DC
• Low Current Draw
• Current draw: 35mA, triggered (relay on)
• Voltage Input and Status LED
SAVE with “Snap
• Size: 2” X 1.5 “ each
• Includes Double Sided Foam Mounting Tape
Apart” 6 packs
• Packaged in Reusable Poly Storage Box
7 62158 60912 1
ELK-912B6
• Lifetime Limited Warranty
41
Sensitive Relay, 12/24 Volt
Sensitive trigger, heavy duty relay module with DPDT (Form “C”) dry contacts.
• Trigger Current: 1.2mA @ 5-24VDC
• Positive (+) Or Negative (-) Trigger Input
• 12 or 24 VDC Selectable Operation
• Voltage Input LED
• Mounts in Standard 2.75" Snap Track
• Elevator Style Screw Terminals
• Size: 1.5” X 2.75” each
• Incl. Double Sided Foam Mounting Tape
• Packaged in Reusable Poly Storage Box
• Lifetime Limited Warranty
ELK-924
7
62158 00924 2
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Trigger Voltage: 5 - 24VDC, Pos or Neg
• Operating Voltage: 12 or 24 Volts DC
• Current draw: 60mA (both relays on)
SAVE with “Snap
Apart” 4 packs
ELK-9244
7
62158 09244 2
Alarm Output Director
Allows single output control to activate 2 separate relays to provide steady voltage to 2 devices.
Intelligently determines whether the source is pulsing or steady. Can be triggered by a positive or
negative source. Possible uses include triggering long-range radio or cellular dialers, fire bells, strobes
and siren drivers.
• Ideal For Two (2) Channel Long Range Radio,
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
Cellular Transmitters, or strobes
• Pulsing Input: .1 - 4sec. (.125-6hz)
• Meets ANSI S3.41 Audible Emergency
• Trigger Voltage: 9 - 14VDC, Pos or Neg
Evacuation Signals 3-Pulse Pattern
• Trigger Current: 15mA
• Elevator Style Screw Terminals
• Operating Voltage: 12 Volts DC
• Lifetime Limited Warranty
• Current draw: 96mA (both relays on)
• Size: 4.4" x 3"x 1.15"
ELK-941
7
62158 00941 9
Relay Module with Timer
Economical and flexible relay with timer for all purpose use. It features positive or negative trigger logic
with triggers as low as 4.5 V, making it compatible with 5 V logic outputs.
• Adjustable Time Delay
• Operating Modes: One-Shot or Repeat
• Low Current Input Trigger (<1mA)
• Configurable to be normally on or normally off
• Size: 3” x 2.2” x 1” (Fits Standard Snap Track)
• Lifetime Limited Warranty
ELK-960
Relays / Timers
7
62158 00960 0
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Time Settings: 1-60 Seconds or 1-60 Minutes
• Trigger Voltage: 4.5 - 24VDC, Pos or Neg
• Operating Voltage: 12 to 24 Volts DC
• Current Draw: 40 mA (relay on)
RELAY FEATURE COMPARISON
42
ELK-912
ELK912B
ELK-924
ELK-941
ELK-960
Type/Description
Compact
12/24 Volt
Sensitive Trigger
Alarm Output Director
Relay with Timer
Purpose
General purpose
switching of devices or
high current loads
General purpose
switching of devices or
high current loads
Use with low current
triggers for switching
of devices and high
currrent loads
Allows single output
control to activate
2 separate relays to
provide steady voltage
to 2 devices
Economical and
flexible with timer for
all purpose use
Operating Voltage
12 VDC
12 or 24 VDC
12 or 24 VDC
12 VDC
12 to 24 VDC
Current Draw
30 mA
35 mA
60 mA
96 mA
40mA
Trigger Voltage
-
-
5-24 VDC
Positive or Negative
9-14 VDC
Positive or Negative
4.5-24 VDC
Positive or Negative
Relay Contact Ratings
7A @ 28VDC, or
10A @ 125VAC
7A @ 28VDC, or
10A @ 125VAC
7A @ 28VDC, or
10A @ 125VAC
7A @ 28VDC, or
10A @ 125VAC
7A @ 28VDC, or
10A @ 125VAC
Relay Contact Type
SPDT Form “C”
Dry Contacts
SPDT Form “C”
Dry Contacts
DPDT Form “C”
Dry Contacts
2)SPDT Form “C”
Dry Contacts
SPDT Form “C”
Dry Contacts
Status LED
✖ NO
✔
✔
Available in money
saving “snap apart”
multi-packs
✔ YES
ELK-91212 (12 Pack)
✔ YES
ELK-912B6 (6 Pack)
✔ YES
ELK-9244 (4 Pack)
✔ YES
✖ NO
✔ YES
✖ NO
Size
1.1” x 1.55”
2” x 1.5”
1.5” x 2.75”
4.4” x 3
3” x 2.2”
Lifetime Limited
Warranty
✔
✔
✔
✔
✔
YES
YES
YES
YES
YES
YES
YES
Provide surge protection on
EVERY INSTALLATION, EVERY TIME!
✔ Exceptional protection for important and costly equipment
✔ Super fast response time
✔ Economical and easy to install
Surge Suppressors
Solid State Surge Suppressors for control systems connected to phone lines. All
units feature a super fast response time of less than 1 nanosecond.
• Solid State clamping Line-to-Line and
Line-to-Ground
• Self restores after surges within ratings
• RJ31/38X 8-Pin Modular Jack
• Color: Black
• Size: 4.4" x 3" x 1.1"
• Telephone Breakover: 300 Volts
• Peak Pulse Current: 100 Amps
• Convenient Test Points For Lineman’s
Test Set
• Lifetime Limited Warranty
ELK-950
ELK-950
ELK-951
ELK-955
• Protects 1 Incoming Phone Line and AC
Input from Transformer
• Max AC Input Voltage: 24 VAC
• AC Breakover: 50 Volts
• Protects 1 Incoming Phone Line
• Protects 2 Incoming Phone Lines
Single Telephone Line & Low Voltage
Surge Suppressor
62158 00950 1
7
62158 00951 8
Dual Telephone Line Only
Surge Suppressor
7
62158 00955 6
In-Line Telephone Surge Protector
The ELK-952 provides exceptional protection against damage from lightning, voltage spikes, and surge
damage coming into a phone line. It installs between the RJ31X Phone Jack and the Security Control. The
ELK-952 features multi-stage protection and is 5 times faster than MOVs
ELK-952
7
62158 00952 5
• 5 Stage Surge Protection
• Very Economical
• Easy to Install
• Works with Any Security Control
• Response Time: < 1 Nanosecond
• Max. Signal Voltage: 250V (peak)
• Breakdown Voltage: 280V (nominal)
• Max ‘Peak’ Pulse Current: 100 Amps
• 1 year limited warranty
Surge Suppressors
7
Single Telephone Line Only
Surge Suppressor
43
Programmable Controls - Magic Modules
Programmable Controls
Magic Module™ Two Input Programmable Controller
Low cost, programmable controller can be a dual time delay relay, process controller, single zone security
control, etc. Programmed using the ELK-MB485 and ELK-MM443.
ELK-MM220
7
62158 50220 0
• 4096 program bytes using SIMPLE
programming language
• Shipped pre-programmed as a single zone
alarm control
• Non-volatile EEProm memory
• Surface Mount Black Enclosure
• Lifetime Limited Warranty
• 2 Digital Inputs
• 2 Relay Outputs
• 4 counters: 0 to 255 increments
• 4 timers: 1/10 second to over 255 hours
• Operating Voltage: 12 Volts DC
• Current Draw: 10mA Nom., 70mA Max.
• Size: 4.5”W x 4.375” H x 2” D
Magic Module™ Four Input Programmable Controller
Communication Accessories
Powerful, networkable, programmable controller can be an automation controller, quad time delay relay,
door access control, security control, etc. Control lighting, security, access, or almost any electrical device
via powerline carrier (X10) or the 4 relays.
ELK-MM443
7
62158 50443 3
• Connection for powerline carrier (X10) interface
• 16,384 program bytes using SIMPLE
programming language
• Network with other Magic Modules or PC over
RS-485 Bus
• Non-volatile EEProm memory
• Surface Mount White Enclosure
• Lifetime Limited Warranty
• 4 Inputs: Digital or Analog sensing
• 4 Relay Outputs
• 4 counters: 0 to 255 increments
• 4 timers: 1/10 second to over 255 hours
• RS-485 Data bus length: 4000 feet Max.
• Operating Voltage: 9.5-15 Volts DC
• Current Draw: 10 mA. Nom., 130mA Max.
• Size: 6.5"W x 4.375"H x 2"D
RS-232 to RS-485 Data Converter
The ELK-MB485 is used to communicate between a personal computer and the ELK Magic Module (ELKMM443).The ELKMB485 converts the computer's RS-232 Serial Data to RS-485 Data which is used by the
ELK Magic Module™ series of products. This allows programs to be downloaded into the Magic Modules.
Input and Output status can be displayed and controlled from the computer.
ELK-MB485
7
62158 50485 3
• Converts RS-232 to RS-485 Data
• Visual Power Indicator LED
• 9 Pin Serial D-Connector
• Terminals for 4-Wire Data Bus
• Surface Mount ABS Enclosure with Snap-On Cover
• Data Interconnect Cable (4 Pin) included
• Computer Serial Cable (9 Pin) included
• Enclosure Size: 4.5" x 3" x 1.2"
• Lifetime Limited Warranty
Communication Accessories
10 Watt Audio Amplifier
ELK-800
7
62158 00800 9
This compact amplifier is ideal for telephone paging, PA, custom voice or alarm annunciation.
• No need for 25V or 70V Line Transformers
• Speaker Load: 8 Ohm Nom., 2 Ohm Min.
• Can drive multiple 8 Ohm speakers
• Color: Black
• Requires only 22-24 gauge telco wire
• Operating Voltage: 12 to 24 Volts AC or DC
• Built-in Volume Control
• Current draw: 50 mA Nom., 800 mA Max.
• Short circuit protection
• Size: 4.5” x 3” x 1.2”
• Output: 10 Watts
• Lifetime Limited Warranty
• Input Impedance: 1000 Ohms Nominal
RJ31X Telco Jack & Cord
For use with Alarm System Communicators, Line Fault devices, or other equipment as a means of
connecting to the incoming telephone line.
ELK-RJSET
7
44
62158 80017 7
• USOC RJ31X 8 pin modular jack
• Built-in pass through shorting bars
• Gold plated connector pins
• Includes self adhesive foam mounting pad
• 2 foot, 8 conductor cord with modular plug on
one end and spade terminals on the other
• FCC approved - UL listed as a Communication
Circuit Accessory
• Lifetime Limited Warranty
Universal Accessories
“B” Connectors
For solid, dependable splicing of 18 to 30
gauge wires.
• Easy to Squeeze Soft Metal Crimp
• Built-in Test Point
• Insulation Piercing Internal Teeth
• Durable Protective Outer Covering
• 2 Handy Zip Lock Bags of 250 pcs each
• 500 pcs per box
• Packaged in Reusable Poly Storage Box
• UL listed
ELK-9022
ELK-9002
7
62158 09002 8
7
62158 09022 6
White Gel Filled “B” Connectors
Yellow Unfilled “B” Connectors
• Non-hardening Gel Moisture Barrier
forms corrosion resistant splice
• White color indicates gel filled
• No Markings on Jacket
• Yellow color indicates unfilled
WARNING ALARM SYSTEM Decals for alarm installations
Alarm Decals
• Attractive Red, Blue and White
• UV Resistant Vinyl Material
• Self Adhesive Peel And Stick Backing
• Fade-Resistant Ink
• Secondary Protective Clear Vinyl Laminate
• Size: 3.2” x 6.4” Triangle Shape
• ELK-998: Package of 100 Decals
• ELK-998-05: Retail Package of 5 Decals
ELK-998
100 Decals
7
62158 00998 3
ELK-99805
5 Decals
7
62158 20998 7
7
62158 00999 0
7
62158 01000 2
Double Sided Foam Mounting Tape
Assorted Thickness
Double Sided Foam Mounting Tape
ELK-999A
• Permanent Rubber Adhesive
• 156 Individual Pieces
• Packaged in Reusable Poly Storage Box
• Individual Piece Size: 1/2" x 1- 1/2"
• Thickness (52 pieces of each): 1/16”, 1/8”, 1/4”
Universal Accessories
ELK-999
• Permanent Rubber Adhesive
• 130 Individual Pieces
• Packaged in Reusable Poly Storage Box
• Individual Piece Size: 1/2" x 1- 1/2" x 1/4" Thick
Project Box
General purpose, paintable box for housing wire splices, relay modules, etc.
• Mounts to a single gang electrical box
• Mounting hardware included
• Removable wire entry tabs work with panduit surface raceway conduit
• Color: White
• Size: 6.5"W x 4.3" H x 2" D
7
62158 11001 6
7
62158 55043 0
ELK-PB1
Utility Box for Power Supplies, etc
Multi-purpose box works well for power supplies and other peripherals.
• Can be used to house
"special projects"
• Hinged cover with camlock
• Color: White
• Size: 12" x 12" x 3.5"
• Included in some M1EZ8 Control kits
ELK-UB12
45
Index
Product Index by Part Number
46
ELK-0613
Battery; Lead Acid 6V-1.3Ah
38
ELK-6020
Slimline Dr/Wndw Sensor; White; 2-Way Wireless 17
ELK-0650
Battery; Lead Acid 6V-5.0Ah
38
ELK-6020BR
Slimline Dr/Wndw Sensor; Brown; 2-Way Wireless 17
ELK-0675
Battery; Lead Acid 6V-7.5Ah
38
ELK-6021
Mini Dr/Wndw Sensor; White; 2-Way Wireless
18
ELK-06120
Battery; Lead Acid 6V-12.0Ah
38
ELK-6021BR
Mini Dr/Wndw Sensor; Brown; 2-Way Wireless
18
ELK-1RT
Speaker; 30W/50W, Stainless Housing
29
ELK-6022
Universal 3-Zone Sensor; 2-Way Wireless
18
ELK-44
Speaker; 30W/50W
31
ELK-6023
Recessed Dr/Wndw Sensor; White; 2-Way Wireless 18
ELK-45
Siren; Self-Contained, Heavy Duty
31
ELK-6023BR
Recessed Dr/Wndw Sensor; Brown; 2-Way Wireless18
ELK-70
Speaker; Interior 20 Watt (Echo™)
30
ELK-6030
PIR Motion Sensor; 2-Way Wireless
18
ELK-71
Siren; Interior Self-Contained (Echo™)
30
ELK-6030P
PIR Motion Sensor; Pet Immunity; 2-Way
18
ELK-73
Speaker; Compact Interior 20 Watt (Echo™)
30
ELK-6040
Glassbreak Sensor; 2-Way Wireless
19
ELK-74
Siren; Compact Interior (Echo™)
30
ELK-6050
Smoke Detector; 2-Way Wireless
19
ELK-100
Siren Driver; High Performance
33
ELK-12120
Battery; Lead Acid 12V-12.0Ah
38
ELK-101
Siren Driver; Two Channel
33
ELK-12180
Battery; Lead Acid 12V-18.0Ah
38
ELK-110
Voice Siren Driver
33
ELK-12260
Battery; Lead Acid 12V-26.0Ah
38
ELK-120
Recordable Voice/Siren Driver; 4 Channel
33
ELK-106055
UltraProx Wiegand Reader
15
ELK-124
Recordable Voice Driver; 8 Channel
33
ELK-BLT
Battery LifeTester™
39
ELK-129
PC Sound Interface for Recordables
32
ELK-BLTLABELS
Test Data Labels for BLT
39
ELK-150RT
Siren; Heavy Duty, Stainless Housing
29
ELK-IP232
Ethernet to RS-232 Serial Bridge
22
ELK-800
Audio Amplifier, 10 Watt
42
ELK-M120
Compact, Single Tone Siren
31
ELK-9002
“B” Connectors, Plain
43
ELK-M1BBK2
Recess Back Box for M1KP2
14
ELK-9022
“B” Connectors, Gel Filled
43
ELK-M1BBKN
Surface Mount Back Box for M1KPNAV
12
ELK-912
Relay; SPDT; 12V
39
ELK-M1BLOCKS
Plug-in Terminal Blocks for M1 Gold
23
ELK-91212
12 Pack Relays; SPDT; 12V
39
ELK-M1BZBKN
Black Bezels for M1KPNAV
12
ELK-912B
Relay; SPDT; 12/24V
39
ELK-M1BZSKN
Silver Bezels for M1KPNAV
12
ELK-912B6
6 Pack Relays; SPDT; 12/24V
39
ELK-M1DBH
M1 Data Bus Hub (Cat5/Cat6 wiring)
20
ELK-9200
Heavy Duty Relay/Contactor; 60A
28
ELK-M1DBHR
M1 Data Bus Hub (4 conductor wiring)
20
ELK-924
Sensitive Relay; DPDT; 12/24V
40
ELK-M1EZ8CB
EZ8 Control Board Only
9
ELK-9244
4 Pack Sensitive Relays; DPDT; 12/24V
40
ELK-M1EZ8KB
EZ8 Kit; 12” Enclosure; M1KP Keypad
9
ELK-930
Doorbell/Telephone Ring Detector
28
ELK-M1EZ8KBS
EZ8 Kit; 12” Enclosure; M1KP2 Keypad
9
ELK-941
Alarm Output Director
40
ELK-M1EZ8MSI
EZ8 Main Serial Interface
11
ELK-950
AC & Telephone Surge Suppressor
41
ELK-M1GCB
M1G Control Board Only
8
ELK-951
Telephone Surge Suppressor
41
ELK-M1GK
M1G Kit; No Enclosure; M1KP Keypad
8
ELK-952
In-line Telephone Surge Suppressor
41
ELK-M1GKS
M1G Kit; No Enclosure; M1KP2 Keypad
8
ELK-955
Dual Telephone Surge Suppressor
41
ELK-M1GOLD
M1G Control in 14” Can w/Lock and hdwr
8
ELK-960
Delay Timer; 12/24V; 1 sec to 60 min
40
ELK-M1GSYS3
M1G Kit; 14” Enclosure; No Keypad
8
ELK-964B20
Master Power Switch (20 Pack)
39
ELK-M1GSYS4
M1G Kit; 14” Enclosure; M1KP Keypad
8
ELK-965
Low Battery Cutoff & Master Power Switch
39
ELK-M1GSYS4S
M1G Kit; 14” Enclosure; M1KP2 Keypad
8
ELK-965B20
Low Batt Cutoff & Mst Power Switch (20 pk)
39
ELK-M1GSYS4STW M1G Kit; Two-Way Wireless
ELK-998
Alarm Decals; Qty. 100
43
ELK-M1KAM
Single Door Access Module
15
ELK-99805
Alarm Decals; Qty. 5
43
ELK-M1KCWB
Keypad Conduit Wall Box
14
ELK-999
Double Sided Tape; Qty. 130 pcs
43
ELK-M1KP
LCD Keypad with Door; Green Display
13
ELK-999A
Assorted Thickness; Double Sided Tape
43
ELK-M1KP2
Low Profile LCD Keypad
13
ELK-1213
Battery; Lead Acid 12V-1.3Ah
38
ELK-M1KP3
Compact LCD Keypad with Door
13
ELK-1233
Battery; Lead Acid 12V-3.3Ah
38
ELK-M1KPAS
LED Arming Station
12
ELK-1250
Battery; Lead Acid 12V-5.0Ah
38
ELK-M1KPB
LCD Keypad with Door; Blue Display
13
ELK-1280
Battery; Lead Acid 12V-8.0Ah
38
ELK-M1KPNAV
Navigator Touchscreen Keypad
12
ELK-6010
4 Button Keyfob; 2-Way Wireless
17
ELK-M1PCSPIM
UPB Interface for M1 Controls
21
ELK-6011
Panic Button; 2-Way Wireless
17
ELK-M1PR
Keypad Plug-in Proximity Reader
15
8
Product Index by Part Number (cont.)
ELK-M1PRC
Proximity Cards
15
ELK-SL1A
Strobe Light; Amber
29
ELK-M1PRF
Proximity Fobs
15
ELK-SL1B
Strobe Light; Blue
29
ELK-M1RB
M1 Relay Board
20
ELK-SL1C
Strobe Light; Clear
29
ELK-M1TWA
Two Way Listen-In Module; Amplified
23
ELK-SL1R
Strobe Light; Red
29
ELK-M1TWI
M1G Two Way Listen-In Interface
23
ELK-SM20
Repl. Magnets for ELK-6020/ELK-6022; 10 pk
17
ELK-M1TWM
Two Way Listen-In Microphone
23
ELK-SM20BR
Repl. Magnets for ELK-6020BR; 10 pk
17
ELK-M1TWS
Two Way Listen-In Speaker/Mic; Surface
23
ELK-SM21
Repl. Magnets for ELK-6021; 10 pk
18
ELK-M1TWSF
Two Way Listen-In Speaker/Mic; Flush
23
ELK-SM21BR
Repl. Magnets for ELK-6021BR; 10 pk
18
ELK-M1XEP
Ethernet Interface
11
ELK-SM23
Repl. Magnets for ELK-6023; 10 pk
18
ELK-M1XIN
16 Zone Input Expander
20
ELK-SM23BR
Repl. Magnets for ELK-6023BR; 10 pk
18
ELK-M1XOVR
16 Output Expander; 8 Voltage/8 Relay
20
ELK-SP12F
12 Watt Speaker; Flush Mount; Interior
30
ELK-M1XRFEG
Wireless Receiver for GE
19
ELK-SP15
15 Watt Speaker; Interior/Exterior
31
ELK-M1XRF2H
Wireless Receiver for Honeywell
19
ELK-SP30
30 Watt Speaker; Interior/Exterior
31
ELK-M1XRFTW
Two-Way Wireless Transceiver
ELK-SP35
20 Watt Speaker; Interior
30
17
ELK-SP40
40 Watt Speaker; Interior/Exterior
31
ELK-M1XSLC
M1 to Lutron Caséta Interface Kit
21
ELK-SS15
Two Tone Siren; 15 Watt; Interior/Exterior
31
ELK-M1XSLU
M1 to Lutron RadioRA 2 Interface
21
ELK-SS30
Two Tone Siren; 30 Watt; Interior/Exterior
31
ELK-M1XSLZW
M1 to Leviton Z-Wave Interface
21
ELK-SS36
Two Tone Siren; 20 Watt; Interior
30
ELK-M1XSP
Serial Expander; Lighting & Tstat Interface
22
ELK-SWB14
14” Structured Wiring Box
26
ELK-M1ZTS
Zone Temperature Sensor
22
ELK-SWB28
28” Structured Wiring Box
26
ELK-M1ZTSR
Zone Temperature Sensor; 7’ Probe
22
ELK-SWD1
Grommet Donut for SWB14/SWB28
27
ELK-MA101
iButton™ Touchkeys; 10 pack
15
ELK-SWFD14
Flush Mount Door for SWB14
26
ELK-MA110
iButton™ Reader Probe & Plate
15
ELK-SWFD28
Replacement Door for SWB28
26
ELK-MB485
RS-232 to RS-485 Data Converter
42
ELK-SWG
Circuit Board Glides
26
ELK-MM220
Programmable Controller; 2 In/2 Out
42
ELK-SWNS1
Nylon Standoffs for Circuit Boards
27
ELK-MM443
Programmable Controller; 4 In/4 Out
42
ELK-SWNSL
Rivets/Plungers for SW Plates/Shelves
27
ELK-P112
Power Supply in Can; 12VDC; 1A
35
ELK-SWP
4.75” Adapter Plate
27
ELK-P112K
P112 w/ 12V, 5Ah Battery
35
ELK-SWP3
3” Adapter Plate
26
ELK-P1215
Power Supply/Charger; 12VDC; 1.5A
34
ELK-SWP4
4” Adapter Plate
27
ELK-P1215K
Power Supply/Charger Kit w/12V, 5Ah Battery
34
ELK-SWR
Universal Mounting Rails
27
ELK-P124
Power Supply in Can; 24VDC; 0.8A
35
ELK-SWS
Battery Shelf 27
ELK-P124K
P124 w/ Two 12V, 5Ah Batteries
35
ELK-TRG1640
AC Transformer; 16VAC 45 VA
37
ELK-P1216
Plug-in Power Supply; 12VDC; 1.5A
36
ELK-TRG2440
AC Transformer; 24VAC, 40 VA
37
ELK-P1417
Plug-in Power Supply; 14VDC; 1.7A
34
ELK-UB12
Utility Box; 12” x 12” x 3.5”
43
ELK-P212S
Supervised Remote Power Supply
ELK-USB232
Cable to Convert USB to RS-232
11
ELK-P412
Power Supply in Can; 12VDC, 4 A
35
ELK-W018B
4 Pin Ribbon Cable
23
ELK-P624
Power Supply Board; 6, 12, or 24 VDC
35
ELK-W035A
Prox Reader Harness for M1KP/M1KPB
14
ELK-P983
Cell Power Pack for Uplink Cell Transmitters
35
ELK-W039A
Prox Reader Harness for M1KP2/M1KP3
14
ELK-PB1
Project Box; 4.375” x 6.5” x 2”
43
ELK-W040A
Serial Ribbon Cable
11
ELK-PD405P
Camera Power Distribution Module
37
ELK-WK1
Wall Mount Kit for SL1 Strobes
29
ELK-PD9
Power Distribution; 9 Outputs, 250mA ea.
37
ELK-WSV2
Water Shutoff Valve; 1”NPT, 12VDC
28
ELK-PD9HC
Power Distribution; 9 Devices, 400 mA ea.
37
M1ToGo
Remote Control Software for Consumers
10
ELK-RJSET
RJ31X Block & Cord
42
22, 36
Index
17
ELK-M1XRFTWKIT Two-Way Wireless Starter Kit
Proud Member of the following industry associations:
45
Elk Products, Inc.
P.O. Box 100
Hildebran, NC 28637
0215
© Copyright 2015
800-797-9355
Fax: 828-397-4415
www.elkproducts.com
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement