9120LBLA_sell sheet_e copy

9120LBLA_sell sheet_e copy
SMOKE
ALARM
IONIZATION
9120LBLA
120V AC, 60Hz Wire-in with 10 Year Sealed battery backup
DUAL IONIZATION
Dual Ionization sensing chamber.
Generally more effective at detecting
small particles produced by flaming
fires. Sources may include paper or
kitchen grease.
10 YEAR SEALED
BATTERY BACKUP
10-year warranty on lithium
battery - No battery changes needed.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
SINGLE BUTTON
TEST/SILENCE
Silences and tests alarm with a
single button.
LOW BATTERY
WARNING
10 YEAR
WARRANTY
LOUD 85DB ALARM
10
IONIZATION
The BRK Brands, Inc. model 9120LBLA is a wire-in, 120V AC 60Hz single and/or multiple
station smoke alarm specifically designed for residential and institutional applications
including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family
dwellings as defined in standard NFPA 101. Model 9120LBLA complies with CAN/ULC S531.
They meet building codes where AC and AC/DC with Silence smoke alarms are required. The
alarms are interconnectable with up to 18 devices, of which 12 can be smoke alarms.
The BRK® 9120LBLA alarm feature a dual ionization smoke sensing chamber screened for
insect protection, an 85dB horn, and a “silence” feature. The “Smart Technology” system is
designed to reduce nuisance alarms. “Latching Alarm Indication” remembers which unit
initiated an alarm. When interconnected in a series, the unit that triggered the alarm rapidly
flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in
memory or “latch” the information and begin to flash the green LED indicator 2 seconds on,
2 seconds off. The “Perfect Mount” system features a gasketless base and a mounting
bracket that keeps the alarm secure over a wide rotation range to allow for true alignment.
This will allow fine-tuning on the positioning to compensate for out of aligned wall studs and
to keep the wording level when wall mounting. A Single button test/silence button eliminates
confusion. Depending on what mode the alarm is in, pushing the button will test, silence,
re-test the alarm when in silence and clear the latching feature. Other Contractor Preferred
features include a dust cover to keep alarm clean during construction, keyhole slots in the
mounting bracket eliminate the need to remove the electrical box screws for installation.
Two locking features are provided to prevent battery theft and/or theft of the unit.
Connection to AC power is made with a “Quick-Connect” wiring harness. Installation is quick,
easy and cost effective.
CAT.
9120LBLA
TOP VIEW
SIDE VIEW
TECHNICAL SPECS
MOUNTING
BRACKET
Alarm Dimensions:
Weight:
Operating Voltage:
Operating Current:
Temperature Range:
Humidity Range:
Audio Alarm:
Test/Silence:
5.6” dia x 2.0”H
6.5 oz
120V AC 60Hz w/ lithium battery backup
.04 amps (standby/alarm)
40°F (4°C) to 100°F (38°C)
10% to 90% relative humidity (RH)
85dB at 10 feet
Electronically simulates smoke condition,
causing the unit to alarm
Press and hold test/silence button
Alarm Reset:
Automatic when smoke clears
Interconnections:
Up to 18 units of First Alert or BRK Smoke, CO and
Heat Alarms. Maximum of 12 smoke alarms. See
user’s manual for details.
Dual chamber ionization
5.6"
2.0"
Smoke Sensor:
ARCHITECTURAL AND ENGINEERING SPEC
The smoke alarm shall be a BRK model 9120BA with battery backup and shall provide
at a minimum the following features and functions:
1. A Ionization smoke sensing chamber.
2. The unit shall be capable of self restoring.
3. Fully screened sensing chamber to resist entry of small insects
thereby reducing the probability of unwanted alarms.
4. Powered by 120V AC, 60Hz and have a 10 year sealed lithium battery backup model
and a solid state piezo horn rated at 85dB at 10 ft.
5. A visual green LED power-on indicator to confirm unit is receiving power or
is in alarm.
6. A full function test button should check all alarm functions by simulating a smoke
condition, causing the unit to alarm.
7. Silence feature - Temporarily silence unwanted nuisance alarms.
8. Two Locking features - tamper resistant locking pins that lock battery drawer
and/or alarm to mounting bracket.
9. The unit shall be capable of operating between 40°F (4°C) and
100°F (38°C) and relative humidity between 10% and 90%.
10. The unit shall have a gasketless base for easy installation and be capable of
keeping alarm secure over a wide rotation range to allow for true alarm
alignment.
11. The unit shall have a plug in connector and be capable of interconnection of up to
18 alarms, 12 of which can be smoke alarms.
12. The unit shall at a minimum meet the requirements of CAN/ULC S531.
INSTALLATION OF ALARM
B
}
Installation of this smoke alarm must conform to all
Canadian electrical code Interconnected units must meet
the following requirements: wire gauge to be per
local codes. It is recommended that all units be on
the same fuse or circuit breaker. If local codes do not
permit, be sure the neutral wire is common to both phases.
678
Indicator Lights/Sounds:
AC Power:
Constant Green LED
DC Power:
Intermittent Red LED
Local Alarm:
Red LED flashes rapidly
Remote Alarm:
Red LED out.
Green LED flashes 2 sec. on/2 sec. off after local alarm
Latching Alarm:
Listing:
Listed to CAN/ULC S531
SHIPPING SPECS:
Individual Carton Dimensions
Weight
Cube
UPC
5.69"L x 2.25"W x 5.59"H
0.69 lbs.
0.043 ft3
0 29054 01757 4
Master Carton Dimensions
Master Pack
14.43"L x 6.19"W x 12.63"H
12
Weight
8.67 lbs.
Cube:
0.654 ft3
I2of5:
100 29054 01757 1
Pallet Information
Cases per Layer
19
Number of Layers:
3
Cases per Pallet:
57
Units per Pallet:
684
Cube:
42.17 ft3
Weight:
539.19 lbs.
THE PARTS OF THIS SMOKE ALARM
1
54 3
2
2
3
6
4
7
5
1.
2.
3.
4.
5.
6.
Mounting bracket
Mounting Slots
Locking Pins
Hot (Black) AC Wire
Nuetral (White) AC Wire
Interconnect (Orange) Wire
7.
Quick-Connect Plug
8
7
1.
2.
3.
4.
}
3
A
1
54 3 2 1
A. Unswitched 120VAC 60 Hz source
B. To additional units; Maximum = 18 total
(Maximum 12 Smoke Alarms)
Smoke Alarm
5. Junction Box
Ceiling or Wall
6. Neutral Wire (White)
Power Connector
7. Interconnect Wire (Orange)
Wire Nut
8. Hot Wire (Black)
©2016 BRK Brands, Inc. Dicon Global Inc.,
All rights reserved
www.brkcanada.ca
www.firstalert.ca
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement