Lenco SCD-420 Portable Stereo FM Radio Instruction manual

Below you will find brief information for Portable Stereo FM Radio SCD-420. This portable device combines a CD player, cassette player, and FM radio receiver, allowing you to enjoy your favorite music in various formats. It includes features like a telescopic antenna, volume control, and a headphone jack, enabling you to customize your listening experience.

PDF Download
Document
Lenco Portable Stereo FM Radio SCD-420 Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • CD Player
  • Cassette Player
  • FM Radio
  • Telescopic antenna
  • Volume control
  • Headphone jack
  • Clock display
  • Programmed playback
  • Repeat, Repeat all, Mix playback
  • Battery powered

Frequently asked questions

Press and hold the PROG / CLOCK-ADJ./PLAY MODE button, press NEXT or BACK to select 12 or 24 hours display. Press PROG / CLOCK-ADJ./PLAY MODE again, hour digit flashes. Adjust hour using NEXT or BACK button. Press PROG / CLOCK-ADJ./PLAY MODE again, minute digit flashes. Adjust minute digit using NEXT or BACK buttons. Press PROG / CLOCK-ADJ./PLAY MODE to confirm the time.

If the CD lens is dusty, clean it with a brush-blower. Blow several times on the lens and remove the dust with the brush. Finger prints may be removed with a cotton swab moistened with alcohol.

Plug in headphones (ø3.5 mm stereo mini-plug) to the PHONES jack. When headphones are plugged in, the speakers are automatically disconnected.

Press the 'PROGRAM' button. Select the desired track number using 'NEXT' and 'BACK' buttons. Press 'PROGRAM' to memorize the track. Repeat for other tracks. Press 'PLAY/PAUSE' to start programmed playback. Press 'STOP' to pause, 'PLAY/PAUSE' to resume, 'STOP' twice or open CD door to clear memory.
Preparing document for printing…
0%