ETX-BT - ADLINK Technology
ETX-BT
ETX Module with Intel® Atom™ Processor E3800 Series SoC
Features
●
Single, dual or quad-core Intel® Atom™ SoC or Celeron® Processor
●
Single SODIMM for up to 4GB DDR3L Up to 4 GB Single SODIMM DDR3L at 1333 MHz
●
Dual channel 24-bit LVDS, analog VGA
●
2 SATA or 2 PATA (Master only), 4x USB 2.0, 10/100 Mbps LAN
(GbE via onboard connector)
●
Extreme Rugged operating temperature: -40°C to +85°C
(build option)
●
Supports Smart Embedded Management Agent (SEMA) functions
Specifications
● Core System
CPU Single, dual or quad-core Intel® Atom™ or Celeron® Processor
Atom™ E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)
Atom™ E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)
Atom™ E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)
Atom™ E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)
Atom™ E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)
Celeron® N2930 1.83 GHz, 400/756 (Turbo) 7.5W (4C/1066)
Celeron® J1900 2.00 GHz, 688/792 (Turbo) 10W (4C/1333)
Supports: Single, dual or quad Out-of-Order Execution (OOE) processor
cores, Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture, IA 32-bit ,
PCLMULQDQ Instruction DRNG, Intel® Thermal Monitor (TM1 & TM2)
Note: Availability of features may vary between processor SKUs.
Memory
Single SODIMM socket for up to 4 GB non-ECC
1333/1066 MHz DDR3L memory
Embedded BIOS
AMI EFI with CMOS backup in 8MB SPI BIOS
Cache
Primary 32 kB, 8-way L1 instruction cache and 24 kB, 6-way L1 write-back
data cache
Expansion Busses
PCI 32-bit rev 2.3 at 33MHz supporting 4 bus masters ISA 16-bit (through
LPC-ISA bridge), no DMA support SMBus (system) , I2C (user)
● Audio
Chipset
Intel® HD Audio integrated in SOC
Audio Codec
Realtek ALC 262, 4-channel High Definition Audio
● Ethernet
Type: Intel® i211 (MAC/PHY) Ethernet controller
Interface: 10/100 Mbps LAN (GbE via onboard connector)
● Video
GPU Feature Support
7th generation graphics Intel core architecture with four Execution Units,
supporting two independent displays
3D graphics hardware acceleration
Support for DirectX 11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2
Video decode hardware acceleration including support for H.264, MPEG2,
MVC, VC-1, WMV9 and VP8
Video encode hardware acceleration including support for H.264, MPEG2 and
MVC formats
VGA Analog VGA supporting resolutions of up to 2560 x [email protected], 24bpp
LVDS
Single/dual channel 18/24-bit LVDS from eDP (two lane)
SEMA Board Controller Supports: Voltage/Current monitoring, Power sequence debug support, AT/
ATX mode control, Logistics and Forensic information, Flat Panel Control,
General Purpose I2C, Watchdog Timer
Debug Headers
40-pin multipurpose flat cable connector
Use in combination with DB-40 debug module providing BIOS POST code
LEDs, BMC access, SPI BIOS flashing, power testpoints, debug LEDs
Note: “Build option” indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product.
Be aware that part numbers for SKUs with “build options” will need to be created and may cause production lead times.
Specifications
● Multi I/O and Storage
USB: 4 ports USB 2.0
PATA: up to two PATA IDE supporting Master only through SATA-to-PATA
controller
SATA: 2 SATA 3Gb/s ports, shared with PATA
(Default is port 1: PATA, port 2: SATA. Other PATA/SATA configurations are
“build options”.)
SSD: optional SATA SSD 4 - 64GB (occupies second SATA port)
● Super I/O
Chipset: Nuvoton W83627DHG-PT
Serial: Two high speed RS-232C ports (COM1/COM2)
IrDA: Supports IrDA 1.0 SIR protocol or Sharp ASK-IR protocol
Parallel: SPP, ECP and EPP mode support (LPT1)
Keyboard Mouse: PS/2 type keyboard and mouse
● Power
Standard Input: ATX = 5V±5% / 5Vsb ±5% or AT = 5V±5%
Management: ACPI 4.0 compliant, Smart Battery support
Power States: C0, C1, C1E, C4, C6; S0, S3, S4, S5
(Wake on USB S3/S4, WOL S3/S4/S5)
ECO mode: Supports deep S5 (ECO mode) for power saving
● Mechanical and Environmental
Form Factor: ETX Rev 3.02
Dimension: 114 mm x 95 mm
Operating Temperature
Standard Operating Temperature: 0°C to +60°C
Screened Extreme Rugged™ Operating Temperature:
-40°C to +85°C (build option)
Humidity
5-90% RH operating, non-condensing
5-95% RH storage (operating with conformal coating)
Shock and Vibration
IEC 60068-2-64 and IEC-60068-2-27
MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A,
Table 214-I, Condition D
HALT
Thermal Stress, Vibration Stress, Thermal Shock and Combined Test
● Operating Systems
Standard Support
Windows 7/8 32/64-bit, Linux 32/64-bit
Extended Support (BSP)
WES7/8, WEC7/8, Linux, VxWorks
Note: “Build option” indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product.
Be aware that part numbers for SKUs with “build options” will need to be created and may cause production lead times.
Functional Diagram
Flat cable connector
on module
GbE
10/100 MHz
GbE
Intel i211
SODIMM
PCIe
port 3
1-4 GB DDR3L
non ECC
SMBus
I2C
SEMA
SMC
SPI 0
BIOS
LM73
SPI 1
BIOS
LPC to ISA
Fintek
F85226A
LPC
25MHz
SATA to
PATA 1
ISA
(Master only)
SATA
1x SATA 3Gb/s
(port 1)
SATA
(Master only)
1x SATA 3Gb/s
(port 2)
Build Option 1
SATA to PATA (default)
or SATA
(formerly “Bay Trail”)
Flat cable connector
on module
Build Option 2
SATA (default)
or SATA to PATA
or SATA SSD
SATA
SSD
LVDS
eDP-to-LVDS
PS/2 Keyboard
PS/2 Mouse
LPT1
COM1 / COM2
PCIe-to-PCI
XIO2001
PCIe
port 2
HD Audio
Analog VGA
LVDS
24-bit
DDI 1
4 lanes DP
FPC
Intel® Atom™
E3800 SoC
SATA to
PATA 2
Codec
ALC262
4x USB 1.1/2.0
DDI 0
eDP 2 lanes
LPC 25 MHz
Super IO
Winbond
W83627DHG-PT
TPM
Atmel
AT97SC3204
PCI
Ordering Information
●
●
●
●
●
●
●
●
Accessories
ETX-BT-E3845
ETX Module with Intel® Atom™ E3845, 1.91 GHz 542/792
(Turbo), 10W (4C/1333)
Heat Spreaders
●
ETX-BT-E3827
ETX Module with Intel® Atom™ E3827, 1.75 GHz 542/792
(Turbo), 8W (2C/1333)
●
ETX-BT-E3826
ETX Module with Intel® Atom™ E3826, 1.46 GHz 533/667
(Turbo), 7W (2C/1066)
ETX-BT-E3825
ETX Module with Intel® Atom™ E3825, 1.33 GHz 533 (No Turbo),
6W (2C/1066)
ETX-BT-E3815
ETX Module with Intel® Atom™ E3815, 1.46 GHz 400 (No Turbo),
5W (1C/1066)
ETX-BT-J1900
ETX Module with Intel® Atom™ J1900, 2 GHz, 688/792 (Turbo),
10W (4C/1333)
ETX-BT-N2807
ETX Module with Intel® Celeron® N2807, 2.16 GHz 4.5W (2C)
ETX-BT-N2930
ETX Module with Intel® Atom™ N2930, 1.86 GHz, 400/756
(Turbo), 7.5W (4C/1066)
HTS-eBT-B
Heatspreader for ETX-BT with threaded standoffs for bottom
mounting
HTS-eBT-BT
Heatspreader for ETX-BT with through-hole standoffs for top
mounting
Passive Heatsinks
●
●
THS-eBT-BL
Low profile heatsink for ETX-BT with threaded standoffs for
bottom mounting
THS-eBT-BTL
Low profile heatsink for ETX-BT with through-hole
standoffs for top mounting
Active Heatsink
●
THSF-eBT-B
High profile heatsink for ETX-BT with threaded standoffs for
bottom mounting
www.adlinktech.com
All products and company name listed are trademarks or trade names of their respective companies.
Updated Mar. 01, 2017. ©2017 ADLINK Technology, Inc. All Rights Reserved.
All specifications are subject to change without further notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement